so i installed the latest update and now recovery mode no longer works. AT ALL. cant flash, boot or access it at all now.
xdarkmario said:
so i installed the latest update and now recovery mode no longer works. AT ALL. cant flash, boot or access it at all now.
Click to expand...
Click to collapse
So flash another twrp?
Skickat från min MI 9 via Tapatalk
flash this ttps://mega.nz/#!CH5jgYTB!yNqOiVoo3cf0_15jIwZ-btO52cvpOG7iZrRCe19V2Nc
its chinese/english only, but functional
superior8888 said:
So flash another twrp?
Skickat från min MI 9 via Tapatalk
Click to expand...
Click to collapse
that still dosent work ether. or it is working but still cant boot into recovery
xdarkmario said:
that still dosent work ether. or it is working but still cant boot into recovery
Click to expand...
Click to collapse
I just did it. It worked. Are you sure youre flashing another version of it ?
Editor: what @xdarkmario Said
Skickat från min MI 9 via Tapatalk
tlacenka said:
flash this ttps://mega.nz/#!CH5jgYTB!yNqOiVoo3cf0_15jIwZ-btO52cvpOG7iZrRCe19V2Nc
its chinese/english only, but functional
Click to expand...
Click to collapse
that worked :good:
for some reason my usual "twrp-3.2.3-10-cepheus-mauronofrio.img"
is no longer working despite it working fine for every other update. ( i notice that the rom said android security patch) in the changelog) i wonder if that changed anything
Are you able to get Magisk working with this ROM ? I can't get Magisk to work. When I flash Magisk the phone boot but the launcher doesn't appear and I can't launch any application.
I tried to flash previous ROM version but I have a recovery loop when I boot.
Do someone else experience the same and have found a solution ?
@xdarkmario i think something changed with last beta of miui eu - till 9.4.25 it was fully functional by me too ) @widze i am working with magisk 19 - if u make fresh install and use magisk from here, it should work - at least mine is and i didnot do anything like dirt flash - only instaled via twrp
tlacenka said:
@xdarkmario i think something changed with last beta of miui eu - till 9.4.25 it was fully functional by me too ) @widze i am working with magisk 19 - if u make fresh install and use magisk from here, it should work - at least mine is and i didnot do anything like dirt flash - only instaled via twrp
Click to expand...
Click to collapse
So I udersstand that it's working for you. I did a dirty flash but without backup support in recoveries, I can't do factory reset...
backup support in recoveries - u mean backup in twrp :? its not functional in any twrp beta for mi9 (actually), the factory reset i can do withou problem - so u go to twrp and there u choose factory reset, swipe left on it and...what ?
tlacenka said:
backup support in recoveries - u mean backup in twrp :? its not functional in any twrp beta for mi9 (actually), the factory reset i can do withou problem - so u go to twrp and there u choose factory reset, swipe left on it and...what ?
Click to expand...
Click to collapse
And I don't want to lost my data... I will wait for another version of Magisk or EU Rom and hope it will be fix.
I dont understand - u Want to do factory reset without loosing data ?
And you think, that solution is in backup in recovery?
If u make backup in twrp = u get img of your phone in actually state 1:1
So if u recover the backup = u get data in phone in same state as It was before = like there was no reset
Is not the solution in use titanium backup ?
Related
ROM LLP6001 (New Firmware release)
This is a test and that will trip KNOX.... So you have been warned about all possible consequences. I am not responsible of anything that can happens to your device.
Please test and report.
I will try to update with new firmwares from Samsung but I am moving to MM with Temaseks CM 13 Rom, Multiwindows works well and Pen support is good, only miss SNote. I like MM very much and N will sure be great.... I don't think Samsung will update our tablet.
Latest firmware from Samsung P600XXUDPD1
Stock.
Deodexed.
Zipaligned.
Rooted.
BusyBox.
Init.d support.
Deknoxed.
Zipalign
Very Light Debloated, all that can be installed with Playstore has been removed.
Get rid of Setup Wizard After first boot you go directly to Home Screen.
SuperSU 2.67 beta that should patch Boot.
Multi Windows quad view.
Add new Power Menu need Xposed
Bugs:
Easy Chart FC
Dont forget to install languages to get Action Memo working and pen writing recognition.
Problem with SD card install Folder mount and run it, it will fix the issues
Backup you existing config with TWRP 2.8.7.0 on ExtSd card
(Flash stock rom with odin to get new bootloader) Not sure about that, should be tested on untouched 4.4.2 system and I dont have one as new SuperSU should patch the boot.img.
Flash TWRP (I recommend the last @joshdroid that allow touch screen to work. https://s.basketbuild.com/devs/Joshndroid/TWRP/lt03wifi).
Reboot in Recovery, Power off then push Power and volume up for 3 seconds, release buttons. Wait until TWRP load.
Factory reset and wipe all but SDext, format data.
Flash the ROM in recovery with TWRP 2.8.7.0. After flashing if TWRP ask to fix root, DO NOT INSTALL!
This is a beta version and should work fine with patched bootloader or unpatched bootloader but I am not sure, please report on success or failures.
Xposed beta version for 5.1.1 works perfectly.
Thanks to @joshdroid for TWRP with touchscreen
@SuperR for Kitchen
@karthikrr that lead the way for patched boot
and others that help testing
BTW: There is a test kernel Z1 by @xluco that works very well test 5.1.1 You can flash it with Flashify or TWRP
Downloads
Release
https://drive.google.com/file/d/0B99zLrJiOZzKU0xqOGo4cTZtcVU/view?usp=sharing
Thank you if you test it and report.
I will be the first one to try this. Will report back.
Can I reflash it directly on kitkat or first I need to install stock firmware via ODIN?
kornelius1982 said:
Can I reflash it directly on kitkat or first I need to install stock firmware via ODIN?
Click to expand...
Click to collapse
Directly.
Edit post
Not directly!
Flash bootloader first flashing 5.1.1 from Samsung with Odin.
Sent from my SM-P600 using Tapatalk
Woohoo! Can't wait to flash when I get home, daily driver has been cm and its so amazing but hate how the volume output of speaker and headset is low than stock.
I was on CM too and use volume booster. It is nice to get Notes and Multiwindows back and oficial LL is great for daily usage
Sent from my GT-I9505 using Tapatalk
Maby you can add the Tab A Apps to the ROM...? Btw, des sb else has this weird status bar bug, where the statusbar dissapperes when swiping down?
wulkanat said:
Maby you can add the Tab A Apps to the ROM...? Btw, des sb else has this weird status bar bug, where the statusbar dissapperes when swiping down?
Click to expand...
Click to collapse
Good point. I'm about the install those tab A apps and see what works and what doesn't.
Send pics
Sent from my SM-P600 using Tapatalk
Anyone tested working TWRP??
Any report yet?
Sent from my SM-P600 using Tapatalk
enotar said:
Directly.
Sent from my SM-P600 using Tapatalk
Click to expand...
Click to collapse
edit: nvm
Installing NAO!!!!!!
Of the Tab A apps fo far the video player, gallery app, and file manager are working. I'm attempting to unzip the ROM and add some of these apps again and reflash it. Will report back
EDIT 1: Splanner seems to be working just fine. The clock also works, but the stopwatch causes a force close. Still testing.
Anyone have problem where in twrp it says "unmount of /system failed: no such volume"
After i wipe cache and reboot its just a black screen
Before flashing factory reset, wipe all but external sd and format data. That should make it.
Sent from my SM-P600 using Tapatalk
I redownloaded the zip, factory reset and wiped everything in twrp still doesnt work
Ill try downloading official firmware and flash using twrp
yusoffb01 said:
I redownloaded the zip, factory reset and wiped everything in twrp still doesnt work
Ill try downloading official firmware and flash using twrp
Click to expand...
Click to collapse
It should flash, often you have to format data
What version of TWRP you have? Should be 2.8.7.0
Did you backup with TWRP on your SD ext card? If yes you can restore in TWRP
Did you format /data? writing yes when TWRP ask?
http://www.sammobile.com/firmwares/database/SM-P600/ with ODIN, there is no zip files now only my rom I think.
I have twrp 2870 I formated everything but internal storage. It flashed but after the Samsung boot screen the screen goes black and nothing happens after that. Is the latest firmware 4.4.2 for our device?
I dont know if you wait long enough. First boot is very long.5 10mn possible. Now if you are comming from 4.4.2 try to flash original 5.1.1 from Samsung with odin, flash TWRP and flash the rom.
Nobody report yet on flashing result bedide you.
Sent from my GT-I9505 using Tapatalk
HI,
I have a redmi5+ rooted. I use luckypatcher (i applied some patchs to some apps) and i have installed once BusyBox (didn't do anything in special).
I want to know if it is secure to flash the full update?
How do I confirm if the system files and vendor are ok to proceed?
I Will follow this tutorial: youtube.com/watch?v=oUUzxYHV_ac
Thanks
aleqa said:
HI,
I have a redmi5+ rooted. I use luckypatcher (i applied some patchs to some apps) and i have installed once BusyBox (didn't do anything in special).
I want to know if it is secure to flash the full update?
How do I confirm if the system files and vendor are ok to proceed?
I Will follow this tutorial: youtube.com/watch?v=oUUzxYHV_ac
Thanks
Click to expand...
Click to collapse
Ota update ?
aikhhk8 said:
Ota update ?
Click to expand...
Click to collapse
Yes, I Know the procedure to flash full zip file via TWRP. Via this toturial: youtube.com/watch?v=oUUzxYHV_ac&t=1s&index=11&list=WL
But i want to know if it is secure to flash, because i used these two applications.
aleqa said:
Yes, I Know the procedure to flash full zip file via TWRP. Via this toturial: youtube.com/watch?v=oUUzxYHV_ac&t=1s&index=11&list=WL
But i want to know if it is secure to flash, because i used these two applications.
Click to expand...
Click to collapse
No tension , u can flash anytime stock or custom ROM via twrp recovery . Any app can't give u problem cuz when u flash new Rom , old system get completely wiped .
aikhhk8 said:
No tension , u can flash anytime stock or custom ROM via twrp recovery . Any app can't give u problem cuz when u flash new Rom , old system get completely wiped .
Click to expand...
Click to collapse
Ok thanks bro, appreciated your attention!
Hi, I'm very newbie at rooting... But I managed to root my phone months ago and now there is this update (V10.2.1.0) that I cannot do because it's rooted...
I still have the original rom but rooted, and I don't want to flash anything since I have all my data, configuration and all this stuff :/
Is it possible to simply update it without flashing since it's the Xiaomi rom ?
Thank you
guys want to flash twrp to flash notification zip but am confused about few thing can you guys can help if the possible explanation in simple words will be appreciated
1: I read my data will get encrypted (what is this thing all about ) what encryption means i mean i know what encryption is in general but what does it mean here and how will it affect me i dont care if my user data get deleted when i flash but i dont wana get bootloop or soft brick
2: any proper noob friendly tutorial
3: can i flash global beta through twrp i dont want root etc just twrp
4 : can i retain twrp after i install global beta without root and magisk
5 : isnt there any portable twrp which i can boot to to flash that zip and all back to normal mean stock recovery
Check this out. Twrp is not official yet, but can use force encryption disabler to keep TWRP work on next reboot to recovery. So far no problem to flash rom via twrp.
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
thomas140 said:
Check this out. Twrp is not official yet, but can use force encryption disabler to keep TWRP work on next reboot to recovery. So far no problem to flash rom via twrp.
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-unlock-bootloader-custom-t3839405
Click to expand...
Click to collapse
thnax for the reply ut that is what my confusion is what dycription means and how it effects
bravo2526 said:
thnax for the reply ut that is what my confusion is what dycription means and how it effects
Click to expand...
Click to collapse
For what I know, if you boot into twrp via fastboot, it will be encrypted back to stock recovery if you don't install the force encryption disabler.
Meaning that, this force encryption disabler is to help to keep the twrp recovery.
thomas140 said:
For what I know, if you boot into twrp via fastboot, it will be encrypted back to stock recovery if you don't install the force encryption disabler.
Meaning that, this force encryption disabler is to help to keep the twrp recovery.
Click to expand...
Click to collapse
o yes its making sense now so if i dont use encryption disabler it will return me to stock recovary. and i f i do it will keep the twrp. ok if it is the case then what will happen if i flash twrp and flash that notification zip and reboot it without that encryption disabler will my phone will be reset or not on next boot
bravo2526 said:
o yes its making sense now so if i dont use encryption disabler it will return me to stock recovary. and i f i do it will keep the twrp. ok if it is the case then what will happen if i flash twrp and flash that notification zip and reboot it without that encryption disabler will my phone will be reset or not on next boot
Click to expand...
Click to collapse
Shouldn't need to reset, just that when you go to next reboot recovery, stock recovery will haunt you.hahaha...
thomas140 said:
Shouldn't need to reset, just that when you go to next reboot recovery, stock recovery will haunt you.hahaha...
Click to expand...
Click to collapse
lolz haunt in good or bad way?
bravo2526 said:
lolz haunt in good or bad way?
Click to expand...
Click to collapse
Well, There's no good and bad when you still can boot as per normal, just that the recovery will be different, either twrp or stock though...
Use the one with working decryption so you don't have to worry about it. Forget every other Recovery and the Encryption Disabler, it just makes things complicated and it's an out-of-date work around for other Recovery's which aren't fixed yet.
If you use official MIUI then you will need to reflash or boot TWRP again if you want to use it, because stock Recovery will replace TWRP when you boot official MIUI. This isn't so bad because it keeps OTA working (unless you flashed Magisk of course, which will need to be uninstalled first before OTA).
CosmicDan said:
Use the one with working decryption so you don't have to worry about it. Forget every other Recovery and the Encryption Disabler, it just makes things complicated and it's an out-of-date work around for other Recovery's which aren't fixed yet.
If you use official MIUI then you will need to reflash or boot TWRP again if you want to use it, because stock Recovery will replace TWRP when you boot official MIUI. This isn't so bad because it keeps OTA working (unless you flashed Magisk of course, which will need to be uninstalled first before OTA).
Click to expand...
Click to collapse
Does this link ok to go for since it mention with working decryption?
https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-decryption-t3853004
Now I am still using the version that needs the disabler, can I just reflash the new twrp file, clear dalvik cache?
thomas140 said:
Does this link ok to go for since it mention with working decryption?
https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-decryption-t3853004
Now I am still using the version that needs the disabler, can I just reflash the new twrp file, clear dalvik cache?
Click to expand...
Click to collapse
You can dirty flash the recovery over the one you currently have, it won't affect your phone at all. Keep in mind though that your device will stay decrypted, you'll have to encrypt it manually via the phone settings.
franz said:
You can dirty flash the recovery over the one you currently have, it won't affect your phone at all. Keep in mind though that your device will stay decrypted, you'll have to encrypt it manually via the phone settings.
Click to expand...
Click to collapse
Interesting, if stay decrypted, that's fine as the twrp will continue stay for future reboot to receovery.
You said that can manually encrypt via phone setting, but how to do that?
thomas140 said:
Well, There's no good and bad when you still can boot as per normal, just that the recovery will be different, either twrp or stock though...
Click to expand...
Click to collapse
so refreshing to know. The only thing that haunts is boot loop to which we non-tech guys are afraid of and technical guys assume that every one knows the basics and hence the confusion occurs as no clear guide becomes available in new days of any mobile launch waiting a noob friendly thread for poco which might explain these in an order but thanx for the time you took to clear a bit
thomas140 said:
Interesting, if stay decrypted, that's fine as the twrp will continue stay for future reboot to receovery.
You said that can manually encrypt via phone setting, but how to do that?
Click to expand...
Click to collapse
yeah its interesting to know i mean why its needed or y will anyone will encypt it again. any scenario ?
bravo2526 said:
yeah its interesting to know i mean why its needed or y will anyone will encypt it again. any scenario ?
Click to expand...
Click to collapse
Perhaps, break up with the mistress (TWRP) and go back to the wife/husband(Stock recovery)? :laugh:
thomas140 said:
Perhaps, break up with the mistress (TWRP) and go back to the wife/husband(Stock recovery)? :laugh:
Click to expand...
Click to collapse
lolz you are funny so you are tempting us to keep mistress no problem if it locks your wealth(data) . meanwhile, global beta 8.10.25 is up for twrp anyone tried?
bravo2526 said:
lolz you are funny so you are tempting us to keep mistress no problem if it locks your wealth(data) . meanwhile, global beta 8.10.25 is up for twrp anyone tried?
Click to expand...
Click to collapse
No idea, I am still stick with miui global 9.6.25. haha
ps: I have no mistress but I have a wife:laugh:
bravo2526 said:
guys want to flash twrp to flash notification zip but am confused about few thing can you guys can help if the possible explanation in simple words will be appreciated
1: I read my data will get encrypted (what is this thing all about ) what encryption means i mean i know what encryption is in general but what does it mean here and how will it affect me i dont care if my user data get deleted when i flash but i dont wana get bootloop or soft brick
2: any proper noob friendly tutorial
3: can i flash global beta through twrp i dont want root etc just twrp
4 : can i retain twrp after i install global beta without root and magisk
5 : isnt there any portable twrp which i can boot to to flash that zip and all back to normal mean stock recovery
Click to expand...
Click to collapse
The simplest option for u is to download twrp with working encryption.
Dont flash it , just boot into recovery by fastboot command thru adb.
Flash whatever u want to and once done flashing , reboot and u will boot with stock recovery. That way for stock roms u can update via OTA also.
There's a thread in Q&A , will post the link in some time , would suggest u read it.
https://forum.xda-developers.com/poco-f1/how-to/xiaomi-poco-f1-root-unlock-bootloader-t3852520
thomas140 said:
Does this link ok to go for since it mention with working decryption?
https://forum.xda-developers.com/poco-f1/development/recovery-twrp-3-2-3-decryption-t3853004
Now I am still using the version that needs the disabler, can I just reflash the new twrp file, clear dalvik cache?
Click to expand...
Click to collapse
That's the only one last I checked, yes that's it.
You will need to reflash stock ROM (actually just vendor) if you want to enable encryption enforcement again in your ROM.
CosmicDan said:
That's the only one last I checked, yes that's it.
You will need to reflash stock ROM (actually just vendor) if you want to enable encryption enforcement again in your ROM.
Click to expand...
Click to collapse
Hmm..
My current info:
Mini 9.6.25
Twrp (need to flash with Force encryption Disabler)
So here's my step to do:
Download the twrp with decryption enabled.
Download same stock rom.
Flash the stock rom
Flash the new twrp I downloaded.
That's all?
Will it be asking for password and stuff? Because as I know if it happens, I need to wipe data, right?
Another scenario, if I am going to flash miui 10 beta or stable in the future, I need to wipe data to get it work after flash?
Hi,
I'll try to keep latest TWRP by wzsx150, that are posted in MIUI Chinese forum here.
Downloads: Google drive
Latest: V3.3.0 April 21st
Changelog (translated):
v3.3.0 April 21st
1. Update to the latest 3.3.0 version, adjust and optimize
v3.2.3 April 1st
1. Update the built-in root to magisk-19.0, And other built-in feature upgrades
2. Other optimization adjustments
Finally. Thank you very much
edit : Can anyone install Magisk? Tried to install but no luck here
RinzImpulse said:
Finally. Thank you very much
edit : Can anyone install Magisk? Tried to install but no luck here
Click to expand...
Click to collapse
As seen on other forums Magisk v19 should work. Wipe Cache / Dalvik after installing...
Deep-Knight said:
As seen on other forums Magisk v19 should work. Wipe Cache / Dalvik after installing...
Click to expand...
Click to collapse
forget to update. yes, beta version works fine. forget that P only works with v19
Does it work with the Global version?
All 3 files seems to be for the China version.
Sent from my Mi 9 SE using Tapatalk
It works. CN just means the language and the origin. For some reason my data keeps getting encrypted after each reboot
can we perform backup and restore with this TWRP?
Tested backup of data, system and boot partitions working ok with 0421.
Haven't tested restore.
danielwright said:
Tested backup of data, system and boot partitions working ok with 0421.
Haven't tested restore.
Click to expand...
Click to collapse
+1
Yeah, I haven't tested restore too
Does anyone know of which files to make a backup from, in order to have a full working rom? There are so many files!
And what about this encryption tab in backup, what's that for?
Sent from my [device_name] using XDA-Developers Legacy app
putti71 said:
Does anyone know of which files to make a backup from, in order to have a full working rom? There are so many files!
And what about this encryption tab in backup, what's that for?
Sent from my [device_name] using XDA-Developers Legacy app
Click to expand...
Click to collapse
The encryption tab is an optional feature if you want to encrypt the backup files generated with a password - much like adding a password to a zip file.
For which partitions to backup to save a full working ROM - see https://twrp.me/faq/whattobackup.html however I haven't tested for MIUI 10/Android Pie on the 9SE.
Did someone successfully restore a backup made with this recovery?
For anyone having issues with flashing. Try disconnecting the cable after flashing and boot into recovery with power + vol up. I am running on stable eu rom with magisk now. Seems to work smoothly
decayed.cell said:
It works. CN just means the language and the origin. For some reason my data keeps getting encrypted after each reboot
Click to expand...
Click to collapse
Did you solve the problem? Cause I have the same on my Redmi 5 Plus and it's VERY annoying. I must format data everytime I want to flash a zip file, or I get an error message. I was planning to buy this phone but the lack of community support scares me quite a bit.
PurPLe SKy said:
Did you solve the problem? Cause I have the same on my Redmi 5 Plus and it's VERY annoying. I must format data everytime I want to flash a zip file, or I get an error message. I was planning to buy this phone but the lack of community support scares me quite a bit.
Click to expand...
Click to collapse
You just need to put in your PIN and it will decrypt
decayed.cell said:
You just need to put in your PIN and it will decrypt
Click to expand...
Click to collapse
But the recovery doesn't ask me for any pin or pattern.
I flashed twrp recovery and all seems good but when i try to boot into twrp there is always still the stock recovery. I tried also with 2 different fastboot but nothing changes. What i need to do ?
when the recovery is flashed, instead of rebooting device when in fastboot mode, just press vol+and power button
PeterImmel said:
Did someone successfully restore a backup made with this recovery?
Click to expand...
Click to collapse
Hi i would to known if restore works Fine?
PurPLe SKy said:
But the recovery doesn't ask me for any pin or pattern.
Click to expand...
Click to collapse
I boot up MIUI normally first. Then set a PIN, then reboot into fastboot and flash TWRP. After that I get a prompt
Hello everyone, a little question. Now I'm running Android 10 miui 11.0.1 rooted with magisc and using pitch black recovery.. It supports the Ota update the same as stock recovery.
My question now is if I upgrate from MIUI 11.0.3 to miui 12.0.3 what will happens with the root? Will I need to delete the data partition?.. Maybe the new version fill found the phone rooted and the phone won't boot.. So I will need to format data..
Pleae answer to me guys asap. I can update the rom using twrp recovery.. But i don't want to lose all my data from the phone if it found the root
Sorry for my bad English..
Phone : mi 8 lite
Rom : official global rom miui 11.0.3 rooted with magisk
the update is : miui12.0.3 (860mb)
derrekgamer said:
Hello everyone, a little question. Now I'm running Android 10 miui 11.0.1 rooted with magisc and using pitch black recovery.. It supports the Ota update the same as stock recovery.
My question now is if I upgrate from MIUI 11.0.3 to miui 12.0.3 what will happens with the root? Will I need to delete the data partition?.. Maybe the new version fill found the phone rooted and the phone won't boot.. So I will need to format data..
Pleae answer to me guys asap. I can update the rom using twrp recovery.. But i don't want to lose all my data from the phone if it found the root
Sorry for my bad English..
Phone : mi 8 lite
Rom : official global rom miui 11.0.3 rooted with magisk
the update is : miui12.0.3 (860mb)
Click to expand...
Click to collapse
Probably you will need to root again!
It will format the partitions before flash the new one.
.
persona78 said:
Probably you will need to root again!
It will format the partitions before flash the new one.
.
Click to expand...
Click to collapse
Hmm.. It is a simple Ota update so maybe it won't format anything.. But I'm thinking after Ota update done maybe the root is gone.. And for the Android 10 if you root your phone after flashing magisk always need to perform a data format..so I don't want to lose anything yet.. I don't know.. ?
derrekgamer said:
Hmm.. It is a simple Ota update so maybe it won't format anything.. But I'm thinking after Ota update done maybe the root is gone.. And for the Android 10 if you root your phone after flashing magisk always need to perform a data format..so I don't want to lose anything yet.. I don't know.. ?
Click to expand...
Click to collapse
Hmmm....
Better to understand how magisk perform the root to understand where files go, i think it do something in boot.img and that is one if the images that Will be flashed i know, i updated it yesterday and a little tweak i had done was gone.
persona78 said:
Hmmm....
Better to understand how magisk perform the root to understand where files go, i think it do something in boot.img and that is one if the images that Will be flashed i know, i updated it yesterday and a little tweak i had done was gone.
Click to expand...
Click to collapse
Yes the magisc use boot.img for root. So the new Ota update will get for sure a new boot.img.. So my phone will no more be rooted.. And if root after that I need to clear the data.. So.. No reason.. Better no update ?
persona78 said:
Hmmm....
Better to understand how magisk perform the root to understand where files go, i think it do something in boot.img and that is one if the images that Will be flashed i know, i updated it yesterday and a little tweak i had done was gone.
Click to expand...
Click to collapse
i updated. and the phone is stuck at miui logo. Formated data and works again.
derrekgamer said:
i updated. and the phone is stuck at miui logo. Formated data and works again.
Click to expand...
Click to collapse
You can install stock recovery and do factory reset, i think it will do a better reset than TWRP.
persona78 said:
You can install stock recovery and do factory reset, i think it will do a better reset than TWRP.
Click to expand...
Click to collapse
nono. i did reset factory using twrp and works very fine, i got a very good twrp That keep force encrypt
derrekgamer said:
nono. i did reset factory using twrp and works very fine, i got a very good twrp That keep force encrypt
Click to expand...
Click to collapse
i tell you that because i think stock recovery reset some other partitions that TWRP doesn´t reset. And you can always change again to TWRP.
But it worked for you is what matters.
I've updated my mi 8 lite. I am using orange fox recovery, updated it using OTA (orange fox also sports it since you keep some auto generated files at sdcard) and I had not to format data partition. In fact, the update did not erase any user info. The only thing I had to do was to flash magisk zip again and voila, root is back and full functional again.