QC3 wall chargers - is this one safe to use? - Xiaomi Mi 9 Accessories

I imported my Mi 9 from Spain, and as I'm in the UK, I purchased an Anker PowerPort+ 1 with QC 3.0 wall charger (can't post links as I'm new here)
Charged my phone a couple of times, and it does seem to fast charge - my only concern is, the voltage is different to that of the EU charger that came from Xiaomi.
The Xiaomi one is; 5V, 2.5A/9V, 2A/12V, 1.5A
The Anker one is; 3.6-6.5V, 3A/6.5-9V, 2A/9-12V, 1.5A
It's only slightly different, but since I'm using the Anker one as my main charger, just want to make sure it's fine to use and won't cause issues with the phone/battery in the long run.

You should buy 27W wall charger from Aliexpress
And you will see full charge from 0 - 100% about 60'

khanhxxx said:
You should buy 27W wall charger from Aliexpress
And you will see full charge from 0 - 100% about 60'
Click to expand...
Click to collapse
Yeah looked into it, but I'd need an adapter right, they don't do it with UK plugs? That's why I just went for a QC3 one for now - so am I okay to use the Anker one with the different voltage, long-term?

Related

Special Charger?

Anyone know if there is any advantage of the charger that comes with the phone compared to a generic micro USB charger?
Sent from my HTC_Amaze_4G using XDA App
They all seem to charge the phone slowly (even the included one). The stock charger is a 1 amp charger, as long as you're using a 1+ amp charger, you'll be fine. Some aftermarket chargers may be lower, they will also work but charge even more slowly. Worth mentioning is that a higher amperage charger will work, but will only charge at the same speed as the included charger.
Same..........
Just bought a new charger cause I left my other in another state, it's the dual usb 3.1 amp charger and it took me from 0 - 90% in 45 minutes. Picked it up at tmo
jre1981 said:
Just bought a new charger cause I left my other in another state, it's the dual usb 3.1 amp charger and it took me from 0 - 90% in 45 minutes. Picked it up at tmo
Click to expand...
Click to collapse
Which charger is this exactly?
Is this the 'Universal Micro USB 2-in-1 Charger' listed on TMobile's website?
I also got a cheap micro USB charger off of amazon.com and its a trickle charge and it also makes the screen unusable as in it doesn't take touch input at all it came with a data cable for the computer as well and it actually drained my battery instead of charged it.

Dash charge 5V 4A from OP to charge MI9

Hello all
Quick question : is my dash charge charger from my ex One plus 3 will do the job for my xiaomi mi9 ?
It is like this one : https://www.amazon.fr/Chargeur-tabl...rge+oneplus+3&qid=1558015037&s=gateway&sr=8-5
It was extremely fast for the one plus, I wonder if I could damage the battery using it on my MI9
OnePlus Dash Charge : 20W
Xiaomi Mi 9 Boxed charger : 18W
Xiaomi Mi 9 supports QC 4+: 27W
So the charger you get in the box is slightly slower, but you can buy a QC4+ charger for ~25-50€ with 27W.
You could also buy a 20W Qi charger, but if have concerns about damaging your battery this should be your last option imo.
You can charge the Mi9 with the OP Dash Charger and it won't damage your phones. I'm not sure if it actually charges with 20W tho. I also switched from the Oneplus 3 to the Mi9 and when i plug in my dash charger it says "fast charging", but i wouldn't say it is faster then the boxed charger.
orawnnd said:
OnePlus Dash Charge : 20W
Xiaomi Mi 9 Boxed charger : 18W
Xiaomi Mi 9 supports QC 4+: 27W
So the charger you get in the box is slightly slower, but you can buy a QC4+ charger for ~25-50€ with 27W.
You could also buy a 20W Qi charger, but if have concerns about damaging your battery this should be your last option imo.
You can charge the Mi9 with the OP Dash Charger and it won't damage your phones. I'm not sure if it actually charges with 20W tho. I also switched from the Oneplus 3 to the Mi9 and when i plug in my dash charger it says "fast charging", but i wouldn't say it is faster then the boxed charger.
Click to expand...
Click to collapse
Thanks
I just tested, and it charges slower with OP dash charge
I have bought the wireless 20w pad charge , and it charges 1% per 40 sec, the pad plugged with the stock xiaomi charger ( who is 18w )
I would like to try a 27W, have you got a link for a good one ?
Have just tried my old OnePlus dash charger and it's the same as a standard normal non quick charge charger, not as fast as the included 18w charger
Anyone tried the oneplus dash charger with the 20w wireless charging pad? Would it throttle the charging speed?
Anyone tried to put diesel into petrol car? Dash charger and QC is whole different charging concept. Dash charger will work like regular charger(max. [email protected]) on every device except Dash equipped devices.
I am not sure why you're being sarcastic.
If you haven't seen a dash charger, I suggest you go take a look. Even if it works like a regular charger (and I want it to be), its output is 5V/4A.
So my question is whether its output can power the xiaomi 20w wireless pad without throttle. I.e. Full charging capability of the wireless pad.
orawnnd said:
OnePlus Dash Charge : 20W
Xiaomi Mi 9 Boxed charger : 18W
Xiaomi Mi 9 supports QC 4+: 27W
So the charger you get in the box is slightly slower, but you can buy a QC4+ charger for ~25-50€ with 27W.
You could also buy a 20W Qi charger, but if have concerns about damaging your battery this should be your last option imo.
You can charge the Mi9 with the OP Dash Charger and it won't damage your phones. I'm not sure if it actually charges with 20W tho. I also switched from the Oneplus 3 to the Mi9 and when i plug in my dash charger it says "fast charging", but i wouldn't say it is faster then the boxed charger.
Click to expand...
Click to collapse
I believe it's not that simple, OnePlus Dash Charge supports 20W charging, BUT that's 5V 4A.
On the other hand, I believe Mi 9 accept max 2A current, so, if you use original OnePlus Dash Charge, it only charges Mi 9 at max 5V 2A = 10W, much slower than use a standard 18W QC 2.0.....
zachwzx said:
I am not sure why you're being sarcastic.
If you haven't seen a dash charger, I suggest you go take a look. Even if it works like a regular charger (and I want it to be), its output is 5V/4A.
So my question is whether its output can power the xiaomi 20w wireless pad without throttle. I.e. Full charging capability of the wireless pad.
Click to expand...
Click to collapse
Actually I have 4 Dash Chargers. There are tons of articles, topics here on XDA explaining how Dash Charging works a why it's not working on QC devices at 4Amps. For example:
https://forum.xda-developers.com/oneplus-3/accessories/dash-charge-protocol-analysis-t3431917
https://www.guidingtech.com/61180/dash-charging-quick-charge-differences/
Long story short, it delivers 4A only for Dash enabled devices, with Dash cable. To maitain compatiblity with USB standard it can work also as regular 5V/2A charger.
BTW Xiaomi Wirless Pad draw 27W to deliver 20W. Look at the specs, it requires 20V/1,35A input. And you are asking if 5V/4A are enough.
ManuBBXX said:
Hello all
Quick question : is my dash charge charger from my ex One plus 3 will do the job for my xiaomi mi9 ?
It is like this one : https://www.amazon.fr/Chargeur-tabl...rge+oneplus+3&qid=1558015037&s=gateway&sr=8-5
It was extremely fast for the one plus, I wonder if I could damage the battery using it on my MI9
Click to expand...
Click to collapse
I recomend you to install aida64 on playstore , go to battery and plug the phone to the chargers.
It will say how much energy is going into the phone.
Try it with both chargers

Original vs Fake Xiaomi 27w charger video comparison

I have seen many people complaining about their 27w Xiaomi charger with problem of not turbo charging, low charging current, overheat, dont work with 20w charger, and etc. And I one of the these guys too. I have ordered two times 27w loosepack charger from chinese online shop and all are fakes. They dont give me consistent turbo charging and dont charge faster than 18w! This pissed me off because there are so many loosepacks out there and the original ones comes from 20w wireless charging bundling box, from mi 9 chinese box, or from 27w charger with box packaging which none of that chinese online shop sell that, all only loosepack which high risk of counterfeits.
Yesterday I bought the 27w charger with box in my local online shop. The seller told me he got the charger from local store in china and bought it to my country. After the charger arrives i tested in and yeah finally I got the original one. I always get "charge turbo" whenever i charge and measurement in ampere App can reach 4800mA which I never get even 3000mA with 18w or that fake 27w one.
So I made a comparison video of those original vs fake charger. I hope it can help you guys who experienced same like me and want to find the original ones. Here is my youtube video link:
https://youtu.be/xx-P6BxZzkU
If you want to see video later, here is also attached the quick glance of my both orig and fake ones. They do have difference in printing quality. And the Ampere screenshot of original charger for reference.
Great. Where can you get the original one?
SmallTarzan said:
Great. Where can you get the original one?
Click to expand...
Click to collapse
I got it from someone who bought it from chinese local store.
If you want get the original one, you need to buy charger with official packaging box. Can be a bundle with 20w wireless, or standalone with box like i bought, but its very rare.
Specifically: aliexpress. Search the shop and see the feedbacks. Look for shop which can provide 20w wireless bundling in one box
https://www.aliexpress.com/item/32976262381.html
I bought that bundle like 20 days ago, it should aerrive by next week at max.
But i got the "traveler charger" (Xiaomi 1A1C) which comes with a Usb Type C and Normal USB port.
Hopefully it charges correctly i will let u know but for now the bad comments i have read just say that they cannont turbo charge using the type C Port.
PriPhaze said:
https://www.aliexpress.com/item/32976262381.html
I bought that bundle like 20 days ago, it should aerrive by next week at max.
But i got the "traveler charger" (Xiaomi 1A1C) which comes with a Usb Type C and Normal USB port.
Hopefully it charges correctly i will let u know but for now the bad comments i have read just say that they cannont turbo charge using the type C Port.
Click to expand...
Click to collapse
Thats 30w charger right? I hope all these chargers are original. I will wait for your review
arddy1 said:
Thats 30w charger right? I hope all these chargers are original. I will wait for your review
Click to expand...
Click to collapse
Yes 30w if you use the type c connector or at least that what they claim.
But since max supported for our device is 27w it is kinda useless.
But nevertheless I will make sure to post here once I get it and try it
Hi
Can you get turbo charging with the wireless charger powered by the 1a1c 30w charger?
daniel0917 said:
Hi
Can you get turbo charging with the wireless charger powered by the 1a1c 30w charger?
Click to expand...
Click to collapse
Nope, it wont work. 20W wireless is working only with MDY-10.
It is not true that the original is only in a transparent box. I got it without this transparent box and it works well.
Thanks for the great infos, I'll post again when I get my 27W charger I ordered from AliExpress!
galakty said:
Nope, it wont work. 20W wireless is working only with MDY-10.
Click to expand...
Click to collapse
Can your 30w charger turbo charge mi 9?
So, anyone has a link to a reliable and tested seller on aliexpress for the 27w charger?
Here's a post to a review of the original 27 W charger ordered from Alixepress. I saw his review on a German forum too. You can also see a screenshot from the Ampere app. Looks legit. https://forum.xda-developers.com/showpost.php?p=79569598&postcount=87
Direct link to Alixepress: https://www.aliexpress.com/item/32974660297.html
You can also check reviews there, several people wrote that Charging Turbo works, you can also see it in their photos.
Personally, I've order the charger from here a week ago: https://www.aliexpress.com/item/33001884969.html
Almost every photo review shows Charge Turbo, so hopefully it's true. I just have to wait until it arrives to try it out.
@arddy1, very nice post, a very detailed comparison. Thanks you!
I was convinced that mine was ok because I see "Charging Turbo" on the Mi9 every time I connect the charger. But looking to the charger details it actually matches the fake one you shown in your video. So I decided to perform some more tests.
- I tried to use a USB voltage/current meter but when I use it then I don't get "Charging Turbo" anymore, which means it blocks somehow some communication between the charger and the phone, could it be?
- in Ampere I can only get 2600mA, while using by cheap 2USD QC 3.0 charger I can get 3200mA;
- since this charger is effectively recognized by the phone with "Charging Turbo", I suppose the problem with the fake one is not the "protocol" or compatibility, but the amount of current it can send to the phone, what do you think?
The final test will be to perform a full charge with both my QC 3.0 and this one to see the difference.
My main concern now is: being a fake charger, is it safe to use it? may it damage the phone? What do you think?
I happen to have both with line and without, and both are working the same Both give turbo charge mode with cable and with wireless charger every time, i would never thought that one might be fake if haven't seen this post.
UPD. I checked were from i have ordered the original : https://www.aliexpress.com/store/3470060?spm=a2g0s.9042311.0.0.27424c4dazyZc0
I have got 27w+cable+20w wireless charger+eu plug, from that store and they came in one package. So i don't know if only the charger will be original. It was shipped ~10 days to Israel.
g_seva said:
I happen to have both with line and without, and both are working the same Both give turbo charge mode with cable and with wireless charger every time, i would never thought that one might be fake if haven't seen this post.
Click to expand...
Click to collapse
But did you actually measure the current with Ampere? In my case it seems I also have a fake one but I always get turbo charge mode as well. However when I measured the actual current in Ampere App I can see that the original 18w charger gives more current/power to the phone than the 27w one.
If possible use Ampere to measure if and report the results.
silmarx said:
But did you actually measure the current with Ampere? In my case it seems I also have a fake one but I always get turbo charge mode as well. However when I measured the actual current in Ampere App I can see that the original 18w charger gives more current/power to the phone than the 27w one.
If possible use Ampere to measure if and report the results.
Click to expand...
Click to collapse
Just measure the charge time in my case if i remember right, 27w charges the phone ~1 hour and charger witch came with phone i didn't measure exactly but i think it something like 1 hour 40 minutes.
As for Ampere it shows ~1500 Ma and ~4.5v on 90% battery level on both chargers and both cables witch came with the chargers. And yes in Israel we have 220-240v power supply, don't remember exactly but i think it's same as Europe. For 5 minutes that i have checked the phone charged to 92% level
g_seva said:
Just measure the charge time in my case if i remember right, 27w charges the phone ~1 hour and charger witch came with phone i didn't measure exactly but i think it something like 1 hour 40 minutes.
As for Ampere it shows ~1500 Ma and ~4.5v on 90% battery level on both chargers and both cables witch came with the chargers. And yes in Israel we have 220-240v power supply, don't remember exactly but i think it's same as Europe. For 5 minutes that i have checked the phone charged to 92% level
Click to expand...
Click to collapse
You should measure it when charge is still below 50%, after that charging current starts to drop.
It might be the case yours is a very good fake charger
I will also compare charging times with mine and the. post the results in a couple of days.
Hello guys,
I bought and recieved this one https://www.aliexpress.com/item/33000669695.html
And it shows "Charge Turbo" as well as about 4700-5000ma using Ampere.
Hope it helps
silmarx said:
@arddy1, very nice post, a very detailed comparison. Thanks you!
I was convinced that mine was ok because I see "Charging Turbo" on the Mi9 every time I connect the charger. But looking to the charger details it actually matches the fake one you shown in your video. So I decided to perform some more tests.
- I tried to use a USB voltage/current meter but when I use it then I don't get "Charging Turbo" anymore, which means it blocks somehow some communication between the charger and the phone, could it be?
- in Ampere I can only get 2600mA, while using by cheap 2USD QC 3.0 charger I can get 3200mA;
- since this charger is effectively recognized by the phone with "Charging Turbo", I suppose the problem with the fake one is not the "protocol" or compatibility, but the amount of current it can send to the phone, what do you think?
The final test will be to perform a full charge with both my QC 3.0 and this one to see the difference.
My main concern now is: being a fake charger, is it safe to use it? may it damage the phone? What do you think?
Click to expand...
Click to collapse
Phone showing charge turbo or not is not determined by the current. I have tested both mode in fake charger, the currents are almost same. It may be determined by that protocol or compatibility thing. When the cable is plugged in and your phone detects that charger is compatible, it will trigger turbo charging mode and allowing more currents to enter inside. But in fake chargers, although it have been already allowed, the charger hardware dont have capability to do that.
I can't test current using usb meter too because it caused the phone cant read the charger compatibility. So in the video i compare currents with app ampere. As long the voltage in app are about same, it can be compared.
About safe or not, i recommend you not to use it. The temperature in fake ones is noticeably higher when charging than the original, even the original has bigger output current.

Baseus 30W charger at Mi 9

does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
I think it's just Quick Charge 3.0. You should buy the 27W charger imo. But i could be wrong
I have it, it does quick charge but not charge turbo
Good I stopped by XDA before purchasing it.
It does say if you scroll down on its specs it's a QC4 charger, but I assumed the described output would be a sum of both USB ports working simultaneously.
Already posted about it some weeks ago.
https://forum.xda-developers.com/showpost.php?p=79530777&postcount=73
It's indeed just a QC 4.0 charger. Will only do 18W.
Hi, I have one. For it to work properly you have to have the cable of more than 30w.
Load much faster than the original that comes in the box. I did a quick test from 75% to 100% with the phone turned off and charged in 25min; so you can assume if it's fast or not.
WTF ; does this phone even do QC4 ... the Xiaomi offical charger is 3.0 and I bought a $68 dollars Belkin QC : 4.0+ offical as per reviews and it caps out at. 3470 : it NEVER has said fast or TURBO and it ofen Ampere reports 1800 mah ? Can anyone explain this in any way
Do you really have to post the same thing in every single charger related topic ?
Ataemonus said:
Do you really have to post the same thing in every single charger related topic ?
Click to expand...
Click to collapse
I couldn't find this :/
hardtheory said:
I have it, it does quick charge but not charge turbo
Click to expand...
Click to collapse
Thanks for info dude
I suspect that Turbo Charge only happens with the 27W factory charger.
Because my Hama QC4+ charger, certified by Qualcomm, charges definitely faster than the 18W charger found in the package, but does not say Charge Fast or even Charge Turbo.
twojastara-5 said:
does anyone tried to charge Mi 9 with this Baseus charger?
https://www.aliexpress.com/item/32988045731.html?spm=a2g0o.cart.0.0.71f43c00TyHdOp
is this charger compatible with 27W xiaomi charging?
Click to expand...
Click to collapse
Call me crazy but I think it will charge the device at 27W speed.
A lot of people don't seem to realize but the "Xiaomi Turbo Charger 27W" is actually QC3, not QC4+, and it does charge the device at 27W. If you find a QC4+ charger that supports 27W and up, you will still get 27W charging but you won't see "Charge Turbo" because it will use the better, newer charging standard.
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
lusp00ky said:
This can make charge turbo QC 3.0 and it's cheaper and with more ports:
https://www.banggood.com/AiNaU-3-US...amsung-S8-Letv-Xiaomi6-mi5-mi6-p-1168215.html
Click to expand...
Click to collapse
Yeah but it can only charge at standard QC3 speeds, aka 18W at max. 9V/2A like the original one does. But the original one can also do 12V/1.5A. So it does not "Turbo Charge".
Careful many poster here are confused. My BELKIN true QC4.0+ never ever charged over 3200mA and averaged out at under 2200mA. Posters who speak about things without testing their theories are really frustrating. Do yourself a favor don't believe this phone accepts QC4 or QC 4.0+ (at least not @July 2019) only QC 3.0 NON FAKE xiaomi 27w can do the 4600mA + it would seem. Turbo charging is required for extremely rapid charge times. Make sure you get OFFICIAL 20V 1.35A from Xiaomi for Turbo Charge sustained charge and under one hour 0--100%
I also purchased a QC 4.0+ Hama DC charger cause Xiaomi doesn't make a DC charger to my knowledge. Guess what ; 18w ish charging speeds .. no Fast or Turbo classification ...
XIAOMI Hoe do you call this phone a QC 4.0/4.0+ unit !!! Cause look close at the charger Turbo pictures they are all using the "Original QC 3.0 Xiaomi charger that we ALL should have got in the box. Instead many of us have wasted tonnes of money and time buying useless to us QC 4.0+ tech that doesn't work or WORSE fake chargers that don't do more than 18w !! By the time we we have ordered 3-4 different chargers trying to get it to work we have to order it on Ali or gearbest or Gearvita. Cause the company does make them after all!! Enjoy the brutal shipping fees and heavy wait times. Well we order this and that trying to get the darn thing to work. So annoyed right now
Hi, I got the original charger and this if it gives the turbocharged 27w charge, however the baseus charger charges the same as the one that comes in the box or with the wireless charge.
I made this short video: https://youtu.be/nFBoPxORzEg
https://forum.xda-developers.com/k20-pro/how-to/mi-9t-pro-30w-charger-experiment-t4003595
read this. Also tested with a mi9 that my fried had. same result.( Turbo charging up to 30W using the baseus charger)
Posted for those who end up here like me and read mixed info
I also have the Baseus charger mentioned above (BS-EU906), the variant with 2 usb A ports.
When I charge with the cable from my samsung galaxy tab S5e it charges with a bit over 4200mA 20w-21w.
But when I charge with my Baseus 2m 5a capable cable (CATSS-B0G), it never goes above 3400mA ~14w.
It still chargers fast, but it is not what was advertised. Both the cable and charger are rated for QC3.
Baseus GaN charger 65W + Baseus 5A cable reaches 5000mA in Ampere, which is assuming 5V (that's what Ampere is assuming), equals to 25W. The fact is voltage in QC is never stable, it's the factor that allows it to dynamically supply power based on various parameters: battery temp, device temp, battery capacity and so on. If you have a USB-C USB doctor (and it should be more accurate than any software based monitoring) you can watch yourself that both the voltage and current are alternating constantly.

Original mi 9 mdy-10-el 27w wall charger

Were i can by the original MI 9 MDY-10-EL 27W wall charger? Not EH, it's USA, Chinese plug adapter, with EU plug connector (Web, online shop). I don't need the wireless charger 20W, i bought it already. Mi France sell both for 50€, it's expensive. I found another one at Aliexpress, 18 USD, but I don't trust the seller, he has only 3 buyers and there is no aftersale expressions. On the other side, other products from this seller are poorly rated.
Bought 2 of those, can confirm 100% original at https://www.gearbest.com/chargers---power-adapters/pp_009422733270.html?wid=1433363
omgomg said:
Bought 2 of those, can confirm 100% original at https://www.gearbest.com/chargers---power-adapters/pp_009422733270.html?wid=1433363
Click to expand...
Click to collapse
I bought a charger from there too, I tried 2 adapters (US to EU) and 2 cables (original Xiaomi cable and Baseus 5A cable), but I never get over 3300 mA. So which cable do you use? and which plug adapter?
And do you see Charging Turbo while charging? Because I don't. I'm running Xiaomi.eu ROM as well.
I have screens posted on another thread in this subsection charging it at over 4800mah if you don't want to believe me. Use the search function.
EDIT: Yes, turbo charging is instant, also am using xiaomi.eu
omgomg said:
I have screens posted on another thread in this subsection charging it at over 4800mah if you don't want to believe me. Use the search function.
EDIT: Yes, turbo charging is instant, also am using xiaomi.eu
Click to expand...
Click to collapse
Which app didi you use to measure it?
I get something around 3800 ma/h with the official one I bought at a Xiaomi store here in Shanghai.
I use ampere and accu battery for measuring.
JetzNicht said:
Which app didi you use to measure it?
I get something around 3800 ma/h with the official one I bought at a Xiaomi store here in Shanghai.
I use ampere and accu battery for measuring.
Click to expand...
Click to collapse
Ampere Pro. By the way I use the official cable that came with the phone.
Also, keep in mind the charging amps will fluctuate during the whole process, as in ANY lithium battery in the world. To better have an idea, monitor the charging when the phone is around 30%~40% charged.
The guys asks for the EL version, specifically said he does not want the EH version, but what do you all do ? Recommend the EH version, of course.
Great help you are.
I can't find the EL version anywhere except bundled with the 20W charging pad. I don't understand why it is so hard to find
Thank you all. I didn't find it. I bought the original EH version from Gearbest, with gocomma EU plug adapter. It shows charge turbo.
I have a turbo showing adapter which has that distinctive "l" icon, but it never goes up around 2300-2400 amps. I'm assuming it's fake. So just getting turbo sign or a case without printing errors doesn't necessarily mean that the brick you got is genuine.
Nightflowers said:
I can't find the EL version anywhere except bundled with the 20W charging pad. I don't understand why it is so hard to find
Click to expand...
Click to collapse
Well, I did not find it even like that. I only found some pictures of it on here, from a French guy who had it bundled with his Mi 9, and on some Russian forum.
I don't get it why Xiaomi does not sell it separately.
But it won't matter when the 40W version arrives for the Mi 9 Pro.
mdy-10-el is finally available on AliExpress and price is great 8-12 eur
roofovec said:
mdy-10-el is finally available on AliExpress and price is great 8-12 eur
Click to expand...
Click to collapse
Right, here's a link : https://fr.aliexpress.com/item/4000288396055.html
Original charger in the box is quick charge 3.0. and it's 18w if i am not wrong.
Mi9 can be charged up to 27w with quick charge 4.0+.
Correct me if i ma wrong
4Freedom said:
Original charger in the box is quick charge 3.0. and it's 18w if i am not wrong.
Mi9 can be charged up to 27w with quick charge 4.0+.
Correct me if i ma wrong
Click to expand...
Click to collapse
I'm sorry but you are wrong.
Xiaomi "Turbo Charge" 27W only works with the Xiaomi 27W adapter which is NOT QC4 (still QC3, with proprietary solution for 27W delivery)
n/a
Nightflowers said:
I'm sorry but you are wrong.
Xiaomi "Turbo Charge" 27W only works with the Xiaomi 27W adapter which is NOT QC4 (still QC3, with proprietary solution for 27W delivery)
Click to expand...
Click to collapse
Turbo Charge 27W work also with Baseus Wall Charger http://https://sklep.telforceone.pl/en-gb/product/2223356/2237051/baseus-wall-charger-pps-qc-usb-pd-45w-white-with-display
or Baseus PPS car charger. Max power is 27W. When i use a original cable and conect to USB-A port in charger my phone display "Charge Turbo" so its QC 3.0 dual channel charging.
When i use USB-C to USB-C cable and PD socket (QC 4.0+) charging similar speed (usually 10V, 2,7A) phone display only fast charging. I test also POCOPHONE F1 and Charge Turbo displays only when i use PD socket.
Anyone know where I can get the UK variant from? I hate using those nasty adapter plugs...
Hi, it's me again. I found and bought MDY-10-EL 27W wall charger, from Aliexpress. The cable is thinner than the original one, but never mind. The charger shows charge turbo while charging and it's ok. But, I can't connect this charger with the original 20W wireless charger! I tried with the sellers cable and the original cable, nothing! When i put the Mi 9, even without transparent case, on the wireless charger, it can be seen nothing!? There is no signs of charging? Besides, with the other 27W fast charger US plug (MDY-10-EH), i have no problems. Wireless charging is working. What can i do with this charger MDY-10-EL, to make it working with 20W wireless charger?
Just one notice. The wireless 20W charger is functional with the original Mi 9 18W charger. The phone can be charged. It's not fast charging, but it's charging! On the contrary, the fast 27W charger is not working with the wireless charger!?

Categories

Resources