MTK phone refuses to wipe/format/flash anything or even be bricked. - Android Q&A, Help & Troubleshooting

Its my daughters bog standard, cheap chinese MTK6580 phone (uhappy up580 if it matters)
It came with stock 5.0 a few years back so I flashed TWRP, rooted it, ported a CRdroid 5.1 rom for it and was working fine. Yesterday on boot every app refused to start, or stopped, or froze including stock launcher and settings so I couldnt do anything at all. Booted to TWRP and wiped cache and dalvik but although TWRP said completed, it hadnt.
So decided to wipe EVERYTHING including data and again TWRP said it had but upon reboot the faulty rom was still there, not working.
Tried to flash a backup that ended in tar error, fixed that and it flashed the backup fine, rebooted but it hadnt.
Tried to TWRP flash a new rom, said it had but it hadnt,
Used SPFlash tools to flash the stock 5.0 rom, THAT said it completed after the usual time and procedure, rebooted but it hadnt
Used SPFlash tools to completely format and wipe the phone which also said it had completed but it hadnt.
I CANNOT wipe this phone using any method I know of! or install or flash anything! Just this same custom rom that was fine for years and just went wrong. Does ANYONE know how I can somehow wipe this phone or flash a new rom? Tried flashing a TWRP with SP tools AND a TWRP .img and they all said completed but obviously, nothing did.... I've accidently bricked phones easier than I can deliberately wipe this one
Any help greatly appreciated.

emmc is weared out. therefore it is read only

aIecxs said:
emmc is weared out. therefore it is read only
Click to expand...
Click to collapse
Gah... exactly what I suspected but hoped not
cheers

Related

Stuck on boot animation (cyanogenmod)

I was using my phone and all had been working fine for ages. It was in my pocket for a while and when i took it out to use it I saw that it was on the boot animation of CM11. My phone was already on when I last used it so I had assumed it had crashed. I took the battery out and turned the phone on again but it got stuck on the CM boot animation. The last time I turned on my phone before that was when I flashed a supersu zip file to make my root work as I was having some problems. After flashing the supersu zip and told my CWM recovery to restart the system, it prompted me to "fix root" or something like that, and I clicked yes and it booted normally. That was the last time it booted normally before being stuck as it is now. First thing I did after it got stuck was go into recovery and reflash my current rom ( a CM11 snapshot) I then got faced with a status 7 error and so couldnt flash the rom. So then I flashed multiple other CM11 roms, none of which worked, so I flashed a CM10.2 stable rom which worked. I then got faced with the fix root before reboot thing and so I clicked yes. Still had the stuck booting thingy. I tried many things, flashing kernals roms gapps etc and nothing made a difference. I wiped cache, dalvik cache and no difference. I even wiped the system and tried to flash roms but only the 10.2 one would work, still got a status 7 with the CM11 ones. When I wiped my data however and flashed CM 10.2, it booted. I still couldn't flash the CM11 roms though even after a factory reset. So I have the reason to believe something in the data is wrong, not cache system or anything like that. What could it be? I don't want to have to lose all my data in order to be able to use my phone again, even then, something is still wrong as my phone won't flash CM11 roms anymore. So my questions are;
What things could have caused this?
Can this be a problem from flashing the supersu zip (a root issue)
Is it possible to somehow view or copy the internal data on a computer (since I cant get into the operating system), and this would allow me to get all my pictures contacts music etc anything so I can use my phone by wiping data?
Thanks, sorry this is quite long and probably hard to understand whats going on, but help is appriciated thanks
Don't fix root if you wish to use SuperSU instead builded-in cm superuser. Also try to flash via Odin latest recovery. TWRP should be fine. You can mount partitions from recovery level to download data to your computer. Of course if it still exists. If not, if they are corrupted you need to flash stock ROM and repeat whole cm11 adventure again. If Odin successfully flash the stock then it's a chance your partition layout and user data are untouched.
____________________________________________
P3110 / I9300 / I9100 / NEXUS 5 / iPAD2

Flashed ROM and now the screen does not display anything

So I followed these instructions to root my LG G3 https://www.reddit.com/r/LGG3/comments/3qcctd/how_do_i_root_a_vs985_running_511_35b/cwe6756. Everything worked fine at first,I downgraded and rooted kitkat,then installed TWRP. After flashing the ROM,nothing displayed on the phone. The phone is booting,I can feel vibrations and hear the volume up notifications,but I'm having trouble getting into recovery. I'm pretty sure this has something to do with the fact that I accidentally flashed the cache after flashing the 9.1 rom,and that I forgot to do a factory reset after the first one. What should I do now?
Can you put it in Download mode? Even if the screen doesn't display anything, you can tell that you successfully got it in Download mode by looking in Windows' Device Manager. You should already have installed the Verizon LG drivers, and preferably rebooted the PC, give the PC up to 10 minutes to load the drivers the first time you connect the phone in Download mode via a USB 2.0 port and with the original cable.
If you get it in Download mode, use LG Flash Tool 2014 to flash the 10B KDZ to make it easiest to root and put TWRP back on.
The problem definitely didn't have anything to do with not doing a factory reset. As long as you had wiped Cache, Dalvik/ART and Data.
By "flashing cache" if you mean wiping Cache, no, that shouldn't be the problem either.
JasmineROM 9.1 is just an update to 9.0; had you flashed 9.0 before 9.1? If not, then that's the problem.
What exactly do you mean about a problem getting into recovery? Do you mean you can't see that either or what?
I managed to get it fixed Since the phone was still working I was able to take screenshots of everything I was doing while hooked up to my computer until I could use Flashify to reboot into fastboot,then repeated the steps to downgrading using these instructions https://www.reddit.com/r/LGG3/comme...phone_stuck_in_factory_reset_status_2/cmlm3wo
It probably was getting into recovery and I just didn't notice since nothing was displaying,but its all working now,and I successfully flashed CM13 instead.

Softbricked Moto C - Followed Unbrick Guide - No use

So I installed successfuly DoT OS on my Moto C, however when I customized my phone a bit, I messed things up and attempted to reset DoT OS to stock settings.
Ever since my phone has been stuck in an infinite boot to TWRP.
Followed this guide:
https://forum.xda-developers.com/showthread.php?t=2426426
I tried wiping Dalvik, Cache
Tried Re-flashing from scratch, wiping Dalvik, Cache, System, Data.
Tried installing a stock rom. Failed.
Tried installing Lineage OS. Still in the loop.
Please help
Today I tried formatting Cache and Data. Still no luck.
Try to flash another twrp and also one old version of stock firmware .
Teddy Lo said:
Try to flash another twrp and also one old version of stock firmware .
Click to expand...
Click to collapse
That totally did it! Now it won't even boot!
In an attempt to flash stock firmware with SF Tool I totally formatted the phone with Format + Download and in the middle of the process I got a message that the firmware cannot be flashed because the phone has a secure baseband and an AUTH file is needed, so now the phone has no firmware and won't boot at all.
I tried an AUTH file I found on the Internet, but it doesn't work.
I am now taking the phone to the service center in hopes that they will be able to flash back the stock firmware and revive it.
Send me you Model Number , and try to flash several times latest stock recovery with Format + Download in order to confuse your phone to be able to flash your phone without problem.
Don't panick , that can happen to everyone.
That error is probably because wrong twrp for that version that you want to flash .

Bricked the phone by wiping every partition in TWRP

My Redmi 5 plus won't boot as I messed up everything while trying to flash a couple of ROMs. At first the two ROMs that I flashed were working well. But after some time, whatever ROM I flashed, the phone started to restart while setting up the first boot (choosing language, region, etc.) and no further. So I tried wiping every partition there is under the TWRP wipe section (cache, system, vendor, data, internal storage, and so forth). Then flashed a custom ROM again with and without GApps but no success. I noticed that the phone even started to restart before the first boot finished. Also, after flashing stock ROM, TWRP said no OS installed. I even tried flashing stock MIUI ROM in fastboot mode. Although it went well, still bootloop and the device keeps restarting. However, before all of these problems, I did take a backup of every partition, leaving nothing behind, so I restored everything but again the "No OS installed, are you sure to boot?" message. Now I'm freaking out, not knowing what to do. I read somewhere that flashing via QPST tool may help but I'm having problems with installing it.
If I manage to make my phone work again, I will not flash any other ROM, ever.
Try installing new firmware with recovery, if that doesnt help you can try flashing with EDL mode.
Just open your phone and bridge these points ( on photo ) and connect phone to PC.
It should appear in XiaoMiFlash as COM[number].
Good luck!
steve_i7 said:
My Redmi 5 plus won't boot as I messed up everything while trying to flash a couple of ROMs. At first the two ROMs that I flashed were working well. But after some time, whatever ROM I flashed, the phone started to restart while setting up the first boot (choosing language, region, etc.) and no further. So I tried wiping every partition there is under the TWRP wipe section (cache, system, vendor, data, internal storage, and so forth). Then flashed a custom ROM again with and without GApps but no success. I noticed that the phone even started to restart before the first boot finished. Also, after flashing stock ROM, TWRP said no OS installed. I even tried flashing stock MIUI ROM in fastboot mode. Although it went well, still bootloop and the device keeps restarting. However, before all of these problems, I did take a backup of every partition, leaving nothing behind, so I restored everything but again the "No OS installed, are you sure to boot?" message. Now I'm freaking out, not knowing what to do. I read somewhere that flashing via QPST tool may help but I'm having problems with installing it.
If I manage to make my phone work again, I will not flash any other ROM, ever.
Click to expand...
Click to collapse
Did u have the global or Chinese rom installed?
And which twrp version do u have?

Xiaomi Mi 9t wont load any custom rom or restore backup

hey guys just looking for some help. ive been modding and flashing phones from 2014, but its always gone really smoothly, so my diagnostic ability is lacking.
it started with flashing twrp. my bootloader is unlocked, usb debugging on, device is showing in adb and fastboot, and i can flash twrp without any issues. hoowever when i go to boot twrp, only the stock recovery boots. i tried to flash twrp using the XiaoMiTool v2, but the same thing happened. i eventually got around this by just booting twrp instead of trying to flash it. so i got in, took a full back-up and started installing a custom rom.
the first one i tried was ParanoidAndroid Quartz. i wiped cache, dalvik and storage then transferred it to my phone, tried to flash and got "zip verification failed". so i turn off zip verification and tried again. it flashed perfectly with zero errors. however, when i reboot the phone it would only boot to stock recovery and not twrp (expected) or the new rom. i tried that a few times, then tried LineageOS, and MSM Xtended 10. all of them had the same issue, the flashed without a hitch, then wouldnt boot.
i also tried flashing a new fw-vendor and it just straight up failed. Then i decided to cut my losses and restore my twrp backup, and that came back with the error, "extractTarFork() process ended with error: 255"
Software before i began these attempts was completely stock, so i dont know what is going wrong, but as of now, my phone is bricked, i cant install a new rom or restore my back-up.
any help is appreciated guys. thanks
You can figure out this problem with
1 Copy backup folder to computer
2- Format Data - Yes , Wipe Everything
3- Install ROM that you have installed before and boot
4- Go to TWRP, format data yes reboot recovery
5- Paste backup folder to internal storage and restore

Categories

Resources