Related
Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Tutorial
albertwesker17 said:
Hello friends a salute to this great community, I am writing to make a query Y200 acquired a Huawei Ascend (U8655-51) here in Venezuela the problem is that one of the bad features of this is that it has very little internal space I have this app installed because memory is full and it is saying it has little disk space now the question is how this team rooteo to put the linksd2 and to activate the partition and others in order to have more space there is a Statute for a site German but nothing does not work on my computer I have done several times and does not work in advance thanks for any help greetings hope one response
Click to expand...
Click to collapse
Hi, Albert, I think you are the one who did this tutorial. THANKS :highfive: . It worked for me; XDA is the most known comunity so I think you should post it here too...
Mensaje original:
"(…) Download the application "Y200ToolBox".
Then, configure the device
> Settings -> Applications -> Quick Restart (uncheck)
> Settings -> Applications -> Development -> USB debugging (enable)
Adb drivers installed connect the device and given the option to finish installing the phone disconnected).
Turn off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
Select the Root + CMW
It takes a few seconds to work, do not touch anything.
It takes a while because the software will be doing some work, but it tells you when the process is finished completely and boot.
And you'll be already root users”
It work perfect for me for rooting, CMW I’m still trying, and when I get it I’ll post it. I hope it will work for everybody.
All credits to the friends in MyHuawei.net for the creation of the tool”
“Root Huawei Y200 Modelo U8655-51
Para los que no han podido ser Root en este modelo con otros métodos (no discrimino ni digo que no funcionan solo es otra alternativa)
Descargamos la aplicación Y200ToolBox al final dejo el link
Luego configuran el dispositivo
Configuración -> Aplicaciones -> Reinicio rápido (desmarcar)
Configuración -> Aplicaciones -> Desarrollo -> Depuración USB (activar)
Instalan los drivers adb, conectan el dispositivo y les dará la opción de instalarlos al terminar desconectan el teléfono
Apagan el dispositivo sacan la batería unos segundos luego la colocan de nuevo encienden el dispositivo en Fastboot con la combinación de las teclas [Volumen- / Poder] durante 15seg se quedara estancado en el logo
Conectan el dispositivo a la PC y ejecutan el software
Selecciona la opción Root + CMW
Dejan que trabaje se tardara unos segundos NO TOQUEN NADA
Lo dejan un rato ya que el soft. Estará haciendo unas tareas más el avisara cuando todo el proceso haya terminado completamente se apagara y encenderá nuevamente
Y listo ya serán usuarios Root"
A mí me funciono perfectamente para el Root, aunque el CMW todavía no me funciona. Si lo consigo lo pongo bueno espero que les sirva a los que tienen este equipo que a mi parecer es muy bueno
Todos los créditos por la creación de la herramienta a los amigos de MyHuawei.Net”
Click to expand...
Click to collapse
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Cuando usé la herramienta no funcionó, así que abrí el directorio de instalación Archivos de Programa/MyHuawei.Net y encontré un archivo BAT: “root.bat”, que corrí e hizo el trabajo, tomó como 5 min. Sigan las instrucciones de Albert en su tutorial y corran “root.bat” en vez de “Y200Toolbox.exe” si les ocurre. Esperen un poco, el teléfono se reiniciará sin privilegios Root y luego se reiniciará de nuevo y finalizará el rooteado.
El mensaje de mi error fue algo como No es una aplicación win32 valida.
XDA doen't let me post the link. Search "Y200ToolBox" in google.
XDA no me deja postear el link. Busquen "Y200ToolBox" en google.
tutorial made by albertwesker at Htcmania
tutorial hecho por albertwesker en Htcmania
I discovered the solution to the error by myself, any questions please ask.
La solución a el error de la aplicación lo descubrí por mi cuenta, cualquier cosa pregúntenme.
thanks
it achieves exactly is mine and quice compratir as I did for this team they have not remembered thanks for bringing xda but I had no problem but brought greetings friend
l7wahn said:
IMPORTANT/IMPORTANTE:
When I used the tool it didn’t work, so I navigated to the install directory Programs Files/MyHuawei.Net and I found a BAT file: “root.bat” that I ran and did the job, it took like 5 minutes. Follow the steps in the Albert tutorial, and run “root.bat” instead of the “Y200ToolBox.exe” if this happens to you. Wait a while, then the phone will boot unrooted, wait a little more and it will boot again by itself and do the Root. :victory:
The error message was like: It’s not a win32 valid application.
Click to expand...
Click to collapse
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Answers
bakuradits said:
i follow the instruction.
> usb debug
> uncheck fast boot
> successfully install and connect adb driver
> Turning off the device, remove the battery a few seconds then put back. Get the device in Fastboot with the combination of the [Volume-/ Power] during 15sec until it stay stuck in the logo
Connect the device to the PC and run the software
here, i follow your instruction in running "root.bat" in the myhuawei.net because i found "It’s not a win32 valid application."
after that it ran the bat file, about 1 minute my pc restarted
> i wait until it works again but it doesn't.
> there's windows error message
where and what are my mistakes?
thanks
Click to expand...
Click to collapse
Why did your pc restarted? or do you mean your Device?
This is what the root.bat do:
first it erase the recovery image and flash an image with cwm (step that will make your device to not get into the recovery any more... There's a solution)
second it flash the y200recovery.img that is in the y200toolbox directory
third it boots
then when the device boots into the android software and you see the loader, or the lock (depending on your configuration) it will run a shell in adb that will get the superuser.apk in the /system directory. If you're using an Huawei u8655-51, there will be not a chance to damage anything if your pacient.
last it sends the adb reboot command to the phone and the phone boots rooted.
Know, make all things again, but wait until the command promt shuts itself.
Alfredohs esto es para ti:
si dañaste el proceso de inicio es porque tal vez usaste otro ".bat" en el directorio. Esto va a dañar el boot.img de tu teléfono, debes usar el stockkernel.bat en modo fastbot para restaurarlo.
If you damaged the booting process in the phone it might be because you used another ".bat" in the directory. Which will change the boot.img so you should use the stockkernel.bat whit the device in fastboot mode to restore it.
Hi... I have used "Y200ToolBox" to root my phone, but it seems something went wrong. I tried to do it again, but while I restart the phone it restarts to CWM recovery. I don't know when this happened. So I think I disconnected the phone before the rest of the process completed the first time I tried, I mean the rooting part... Can you help me to solve this?
--------------------------------------------------------------------
Hola, he usado "Y200ToolBox" para rootear mi fone, pero parece que algo salió mal. Intenté hacerlo de nuevo, pero mientras reinicio el fone este se va al CWM recovery. No sé cuando pasó, así que pienso que lo desconecté antes de que cumpliera el resto del proceso la primera vez que lo hice, me refiero a la parte del rooting... Me podrían ayudar a resolver esto?
Huawei ascend y200 FM apk required
Hi
I rooted my Huawei ascend y200 and accidentally removed the FM application. If you have the apk please share it
My padfone was bricked when I tried to replace the recovery by TWRP via goomanager (TWRP official recommended).
The procedure of goomanager makes nothing happens, it seems like just download the TWRP package.
The problem is that phone has different protection policies compared to HTC, samsung etc and the bootloader (fastboot mode) is locked by default.
In other words, there is no such a way to connect your phone when your rom, recovery did not pass the verification unless unlock the bootloader by ASUS official tool and void warranty before your operations.
If the recovery or roms did not pass the validation then the left-top corner of screen will show 'invalid kernel' and the phone haven't been unlocked to be premised to visit fastboot mode then the phone will be bricked.
I think there is two way to unbrick, the first is to unlock the bootloader by external connector, the other is to flash official recovery data by external. But when I tried to search solutions, I got nothing about padfone A66 even that RIFFBOX official forum.
Does anyone have an ideal to help me break the difficult circumstances?
s943035 said:
My padfone was bricked when I tried to replace the recovery by TWRP via goomanager (TWRP official recommended).
The procedure of goomanager makes nothing happens, it seems like just download the TWRP package.
The problem is that phone has different protection policies compared to HTC, samsung etc and the bootloader (fastboot mode) is locked by default.
In other words, there is no such a way to connect your phone when your rom, recovery did not pass the verification unless unlock the bootloader by ASUS official tool and void warranty before your operations.
If the recovery or roms did not pass the validation then the left-top corner of screen will show 'invalid kernel' and the phone haven't been unlocked to be premised to visit fastboot mode then the phone will be bricked.
I think there is two way to unbrick, the first is to unlock the bootloader by external connector, the other is to flash official recovery data by external. But when I tried to search solutions, I got nothing about padfone A66 even that RIFFBOX official forum.
Does anyone have an ideal to help me break the difficult circumstances?
Click to expand...
Click to collapse
even after bootloader unlock still got invalid kernel.. and there is no way to connect the device to pc in this case.
Hi, i did fix "invalid kernel" via jtag
Jig
nicolayer said:
Hi, i did fix "invalid kernel" via jtag
Click to expand...
Click to collapse
Hi!
I heave the same problem on my a66 "invalid kernel"!
I would bee wery thankful i you would describe a little bit more about that how you fixed using jig!
My phone is dead for 6 months, it would be great to fix it!
+ 1
Anyone here succeeded in unbricking?
in Windows 7 64 devicemanger the phone does show up as: ASUS android bootloader interface. In other words; Windows can see the phone.
What if you connect the bricked phone to a Linuxcomputer. Would that help? I mean, System and Storage are all on one single eMMc inside the phone. Is there no way to access this and read - write on it?
Nicolayer: you'r still there? A tutorial would be much appreciated.
signed .hex file needed
Hi guys!
Maybe I founded a soution for unbrick asus A66 with qualcomm download mode.
form teh pst ( http://forum.xda-developers.com/showthread.php?t=2136738 ) I take qlod.py and other stuff, just dosen't work because need proer signed MPRG8260.hex file for waking up the phone from a "deep sleep".
This "invalid kernel" has just happened to me for the second time when downgrading to 4.0.3 ICS using TWRP and I'm rather frustrated right now. I'm posting here because I am highly interested in a way to fix this that does not involve ASUS, which I've already done.
What's the deal with this signed MPRG8260.hex file? Also, is there anything new concerning a fix using JTAG? Is there anyone out there who can fix it and would offer a repair? I really want to get this brick back to life.
Thanks in advance,
-L
Padfone A66 JTAG fix for invalid kernel
<delete please>
missing files
my new information is...
QPST and Qualcomm QDload driver need.
manulal for emmcswdownload you can find on the internet
sahara.xml
8260mprg.mbn
8260_msimage.mbn
rawprogram0.xml
patch0.xml
and need a full firmware.
anybody have got these files?
I fnid *.mbn files (on chinese sites) but all was died...
s943035 said:
Mi padfone se bloqueó cuando intenté reemplazar la recuperación por TWRP a través de goomanager (recomendado por el oficial de TWRP).
El procedimiento de goomanager hace que no pase nada, parece que simplemente descargue el paquete TWRP.
El problema es que el teléfono tiene diferentes políticas de protección en comparación con HTC, Samsung, etc. y el gestor de arranque (modo de arranque rápido) está bloqueado de forma predeterminada.
En otras palabras, no existe tal manera de conectar su teléfono cuando su rom, la recuperación no pasó la verificación a menos que desbloquee el cargador de arranque con la herramienta oficial de ASUS y anule la garantía antes de sus operaciones.
Si la recuperación o las roms no pasaron la validación, la esquina superior izquierda de la pantalla mostrará 'kernel no válido' y el teléfono no se ha desbloqueado para visitar el modo fastboot, entonces el teléfono se bloqueará.
Creo que hay dos formas de desbloqueo, la primera es desbloquear el cargador de arranque mediante un conector externo, la otra es actualizar los datos de recuperación oficiales mediante un conector externo. Pero cuando traté de buscar soluciones, no obtuve nada sobre padfone A66 ni siquiera en el foro oficial de RIFFBOX.
¿Alguien tiene un ideal que me ayude a romper las circunstancias difíciles?
Click to expand...
Click to collapse
Mod edit - translated by https://www.deepl.com/translator
Hello, I have exactly the same problem, KERNEL NOT VALID on my asus a66 and it is incredible that 11 years later there is still no other solution than RIFF JTAG to solve this, however for the asus A68 if it exists, it is very strange, The mobile turns on but the computer does not detect it, any help?
***********************
Hola, tengo exactamente el mismo problema, KERNEL NO VÁLIDO en mi asus a66 y es increíble que 11 años después todavía no haya otra solución que no sea RIFF JTAG para solucionar esto, sin embargo para el asus A68 si existe, es muy raro, El móvil enciende pero no lo detecta el ordenador, alguna ayuda?
kevin_23 said:
Mod edit - translated by https://www.deepl.com/translator
Hello, I have exactly the same problem, KERNEL NOT VALID on my asus a66 and it is incredible that 11 years later there is still no other solution than RIFF JTAG to solve this, however for the asus A68 if it exists, it is very strange, The mobile turns on but the computer does not detect it, any help?
***********************
Hola, tengo exactamente el mismo problema, KERNEL NO VÁLIDO en mi asus a66 y es increíble que 11 años después todavía no haya otra solución que no sea RIFF JTAG para solucionar esto, sin embargo para el asus A68 si existe, es muy raro, El móvil enciende pero no lo detecta el ordenador, alguna ayuda?
Click to expand...
Click to collapse
@kevin_23
As courtesy I've translated your above post. With reference to rule no. 4 of the XDA Forum Rules, please post in English or add at least an English translation to your Spanish posts.
Spoiler: Rule No. 4
4. Use the English language.
We understand that with all the different nationalities, not everyone speaks English well, but please try. If you're really unable to post in English, use an online translator. You're free to include your original message in your own language, below the English translation. (This rule covers your posts, profile entries and signature). You could try :- https://translate.google.com/ or https://www.babelfish.com/ or use one of your choice.
Thanks for your cooperation!
Regards
Oswald Boelcke
Senior Moderator
I've just had a Toshiba Excite 7 "(AT7-A) NOT (7.7)" tablet as a gift few days ago, and searched all over the internet for some way to root it but I found nothing.
Can anyone help me with this?
Here is some information about the device attached
Thanks in advance.
Goolileo said:
I've just had a Toshiba Excite 7 "(AT7-A) NOT (7.7)" tablet as a gift few days ago, and searched all over the internet for some way to root it but I found nothing.
Can anyone help me with this?
Here is some information about the device attached
Thanks in advance.
Click to expand...
Click to collapse
This thread may help you -- DO NOT CHECK
EDIT :
I think your device is not capable if being rooted or no one has found how to yet
Goolileo said:
I've just had a Toshiba Excite 7 "(AT7-A) NOT (7.7)" tablet as a gift few days ago, and searched all over the internet for some way to root it but I found nothing.
Can anyone help me with this?
Here is some information about the device attached
Thanks in advance.
Click to expand...
Click to collapse
friend I achieve with this program .. I have the same tablet and if you managed this .... sorry for my bad English, use translator
http://www.kingoapp.com/android-root.htm
kakurri said:
friend I achieve with this program .. I have the same tablet and if you managed this .... sorry for my bad English, use translator
http://www.kingoapp.com/android-root.htm
Click to expand...
Click to collapse
Are you trying to say that is posibble with this tool?
you did it?
hope that's real
manuelchef89 said:
Are you trying to say that is posibble with this tool?
you did it?
hope that's real
Click to expand...
Click to collapse
if it is real .... the proc that takes a while but does the job. Here I give some videos for you and sorry for the English as you know I am using a translator
http://youtu.be/vxnm8-RmFys
http://youtu.be/NzYU-WUcphk
kakurri said:
if it is real .... the proc that takes a while but does the job. Here I give some videos for you and sorry for the English as you know I am using a translator
http://youtu.be/vxnm8-RmFys
http://youtu.be/NzYU-WUcphk
Click to expand...
Click to collapse
did you speak spanish? maybe i can understand a lil bit better =D
manuelchef89 said:
did you speak spanish? maybe i can understand a lil bit better =D
Click to expand...
Click to collapse
jajajjaja claro que hable español... saludos desde chile jajajajjajajajajajja
kakurri said:
jajajjaja claro que hable español... saludos desde chile jajajajjajajajajajja
Click to expand...
Click to collapse
Hola quiero rootear mi tablet at7-a no se si lograron hacerlo descargue bel programa pero no reconoce mi tab
Toshiba 7 model # at7-b android 4.2.2
Does anyone Have a rooting method for this tablet
Toshiba 7 model at7-b tried with framaroot didn't work any help would be appreciated also having a hard time finding drivers
Please help
Thanks
josuederas said:
Hola quiero rootear mi tablet at7-a no se si lograron hacerlo descargue bel programa pero no reconoce mi tab
Click to expand...
Click to collapse
instala los drivers del tablet.. al conectarlo debería reconocerlo automáticamente el pc. ademas debes marcar la opción depuración usb en el tablet. si no se instalan los drivers instala este programa pdanet https://mega.co.nz/#!uY8AwTKA!S4iFJUAHo1BPYhDhSJLmV0oUq1YQMrd9QvAzYT9ugiE cuando el programa te solicite el modelo del tablet coloca otros y conecta tu tablet en depuración usb y te pedirá instalar los drivers y listo utiliza el kingo
suerte .....
hola men
kakurri said:
jajajjaja claro que hable español... saludos desde chile jajajajjajajajajajja
Click to expand...
Click to collapse
hola men, soy uruguayo y tengo la misma tablet que tu pero no he podido con tu programa por problemas de driver, me ha vuelto loco porfavor pasame tu fb por pribado o agregame y hablamos, prometo no joderte mucho
T1nch0 said:
hola men, soy uruguayo y tengo la misma tablet que tu pero no he podido con tu programa por problemas de driver, me ha vuelto loco porfavor pasame tu fb por pribado o agregame y hablamos, prometo no joderte mucho
Click to expand...
Click to collapse
para todos los que no puden instalar los driver . aqui les dejo una copia de mis driver , probados en windows 8.1
for those who can not cover installation of the drivers. here I leave a copy of my driver, I tested on windows 8.1
https://mega.co.nz/#!bYcljLBT!4hP_zSkuzEXDpUzkcrTT0MesLlL4Z_14jOjpBv3zi_I
i'hve done!
Goolileo said:
I've just had a Toshiba Excite 7 "(AT7-A) NOT (7.7)" tablet as a gift few days ago, and searched all over the internet for some way to root it but I found nothing.
Can anyone help me with this?
Here is some information about the device attached
Thanks in advance.
Click to expand...
Click to collapse
Hello! i can root my tablet excite 7" qcore with 4.2.2 (JB) Unknown sources activated, USB Depuring activated too...
using an apk file...
Warning! Use it under yor own risk, it worked good on mine but i can't responzabilize for yours... follow the steps and ther must no be troubles...
Can u download from here >>>>>> Https : / / mega . co.nz/#!eYYW1bBB!FpuyHz8vPVYWZ9dloC_atBzuC3phI_XYRmumLf24o2g<<<<<<<<< watch out the spaces! (quiten los espacios)
1. open zip from sd card usin es file explorer or equal
2. enter until you find "root_4.3.apk" and install it.
3. This app is in chineese or something, just click the big button (it says somethin in chineese but also says ROOT) Click the button, when ask something click the RIGHT BUTTON.
4. the app will restart tablet and then will be able to use root :laugh:. Always use the right button for give super user permissions to app that need it.
5. (optional) install another Super User app (in your favourite languaje) give it super user privileges and use some times, then you can uninstall the root app and the super user chineese... if you loose the super user permissions try again the procedure and let the super user stay some more time in your system before removing chineese...
it worked already whith my tablet an my girlfriend's phone (Xperia J) i hope you can do it
Alwas can you chech for superuser permissions with super user checker at play store.
Sorry for the bad english lol
En español...
Advertencia!
Me funcionó a mi, no garantizo que funcione en tu dispositivo, recuerda que siempre debes hacerlo bajo tu responsabilidad, si sigues nos pasos no deberías tener problema con esto...
mi tableta es Toshiba Excite 7" con JB 4.2.2 tengo activado el modo depuración y las fuentes desconocidas.
1. Abre el archivo comprimido desde tu celular (SD) con cualquier explorador de archivos.
2. Abre la carpeta que está ahi y luego instala el apk "root_4.3.apk".
3. La aplicación está como en chino pero a mi me funcionó, solo abrela y te saldrá un botón grande que dice ROOT, das clic y esperas, cuando la aplicación pregunte algo (en chino) salen dos botones, hay que tocar el de la derecha (que quien sabe qué dice)
4. La aplicación reinicia la tableta y ya tenemos permisop de super usuario, siempre dando clic al borón de la derecha para concederlos.
5. (Opcional) Para poder manejar mejor los permisos de super usuario hay que instalar nuestra propia aplicación super usuario, yo utilicé "super SU" porque solita desinstala el superusuario chino y se queda los permisos
* Si pierdes los permisos de super usuario al borrar la aplicacion china trata de nuevo todo el procedimiento y deja un poco más la aplicación china....
Eso es todo, recuerden revisar los permisos de super usuario con alguna aplicación que lo requiera o con root checker, este procedimiento funcionó con mi tableta y con el celular de mi novia (Xperia J)
Worked! Thank you very much
front camera
my tablet AT7-A front camera dos't work any more & i can't find any set up for it to run again
can any one help me.
Thx
remon ramsis said:
my tablet AT7-A front camera dos't work any more & i can't find any set up for it to run again
can any one help me.
Thx
Click to expand...
Click to collapse
Try erasing data for the app at app manager in settings...
hola
Hola.
tengo la toshiba at7-asp01sl
Pero no enciende, aparece el logo de tohiba y luego no carga android, intente con el recovey de fabrica pero tampoco funcionó...
alguna sugerencia?
Saludos desde Chile.
---- English-----
Hi.
i have a toshiba toshiba at7-asp01sl.
but when turned on, only shows the toshiba logo, no load android and i tried with recovery factory and nothing...
Any suggestions?
regards from Chile, and sorry my English XD
Ya lo reinicio como configuración de fabrica desde recovery? Elimino algo del sistema ?
kakurri said:
Ya lo reinicio como configuración de fabrica desde recovery? Elimino algo del sistema ?
Click to expand...
Click to collapse
si, ya o hice. pero ahora no me aparece nada, creo que necesito el firmware de esta tablet.
saludos.
It really workss!!!
manuelchef89 said:
Are you trying to say that is posibble with this tool?
you did it?
hope that's real
Click to expand...
Click to collapse
I reseached and found out how to use this tool!!
and it also needed that the toshiba at7 had a developer option to activate usb debugging and the way to unlock this option is:
1.go to setting
2.press "about tablet"
3.press "build number" multiple times until it says "you are now a developer"
4.go back and the developer option is now available
Now just activate usb debugging and just follow the instruction about the software
Hoped it helped
---------- Post added at 11:19 AM ---------- Previous post was at 11:08 AM ----------
elplopazo said:
Hola.
tengo la toshiba at7-asp01sl
Pero no enciende, aparece el logo de tohiba y luego no carga android, intente con el recovey de fabrica pero tampoco funcionó...
alguna sugerencia?
Saludos desde Chile.
---- English-----
Hi.
i have a toshiba toshiba at7-asp01sl.
but when turned on, only shows the toshiba logo, no load android and i tried with recovery factory and nothing...
Any suggestions?
regards from Chile, and sorry my English XD
Click to expand...
Click to collapse
Actually i have the same problem and just wipe my data continously and it worked for me
Hi guys,
I would like to know the best way for rooting my tablet Polaroïd MID 9748 with Android 4.2.2 kernel 3.0.36.
My objectif is to install a soft which put the data on the external sd card :
http://forum.xda-developers.com/showthread.php?t=2192122&nocache=1
Tanks for jour help
Ok I respond to myself .... aleast there is one interessted :victory:
Ifound the solution here.... My error was I searched with the device name but it's better to search with the CPU name as RK3188
So I found this working procedure here :
http://hwswbits.blogspot.fr/2013/09/root-rockchip-stickstablets-from-linux.html
May Help.....
Thanks for the infos,
I'm looking for the same, but from Windows 7
I just got the Polaroid MID9748 yesterday (120$), extremly interesting performance/price ratio !
I don't use Win7 but I can recommend you these points :
- Check if the CPU name are the same?
- You need to install the usb driver on you PC first according you CPU name: http://www.rockchip.nl/downloads/
- Install adb : http://www.xda-developers.com/android/adb-easy-tutorial/
- Download the TPSarky-Von-Droid-Root.rar
There is a bat file inside with the command, according Linux world is like script.sh file in the blog in my second post, open it check if there lot difference. If you're not sure don't launch it. Read carefully this post http://forum.xda-developers.com/showthread.php?t=1526487 where TPSarky-Von-Droid-Root package is from.
In hoping to help.....
hi,
thanks my Polaroid MID9748 RK3188 is root
now, how to install a new firmware / custom rom / 4.3?
and how save the original rom ?
i have ploblem with bluetooth GPS and with waze (can't install via playstore)
thanks
f1ioi said:
hi,
thanks my Polaroid MID9748 RK3188 is root
now, how to install a new firmware / custom rom / 4.3?
and how save the original rom ?
i have ploblem with bluetooth GPS and with waze (can't install via playstore)
thanks
Click to expand...
Click to collapse
I didn't go until this point as I bricked my Iconia :silly:. May be you've to open a new post, specialy for GPS question....
Answer in Spanish
f1ioi said:
hi,
thanks my Polaroid MID9748 RK3188 is root
now, how to install a new firmware / custom rom / 4.3?
and how save the original rom ?
i have ploblem with bluetooth GPS and with waze (can't install via playstore)
thanks
Click to expand...
Click to collapse
Hi!
Respuesta en español :
Tu debes:
-Descargar la App Arctools (xxxx = mega) https xxxx .co. nz /#!gUpkjQTA!LWJCbE7fuH8UBDAI6237s1ZQuAU0PN-WeGrkFYLLwwk
-A través de esa App tienes que descargar e instalar CWM en la pestaña Apps
-Luego de instalar CWM, tienes que hacer Reboot Recovery, en la pestaña Reboot
-Luego, dentro de CWM, con la pantalla táctil, ir a Backup and Restore
-Si tienes una microSD (requerido para este paso) elegir la opción Backup to external_sd
-Esperar algunos minutos y voila!
Aquí hay un backup (créditos a blackfox69):
https xxxx .co.nz /#!K9p0kS6I!7a_BZSRKlSlpmySpLvWAeXRux4YofLHqoZ_IuYNI5Nk
Espero que te sirva y les sirva a todos los que tenemos esta tablet!
Espero que algún cocinero pueda cocinar una Custom Rom.
PD: Hay una Custom ROM de una Tablet marca Visture V97HD, que instale en esta Tablet, pero no me funcionaba el táctil, ni las cámaras y ni los sensores, pero el sistema andaba fluido. Espero que se pueda hacer algo combinando las dos.
Espero que me entiendan! :fingers-crossed:
hi
does someone still have the blackfox69 backup?
it's no more online and i would need it
thanks
I'm looking for official firmwares for Moto One Fusion (not plus). XT2073-2.
Android 10 latest build is: Motorola_One_Fusion_XT2073-2_ASTRO_RETAIL_QPLS30.62-22-3_10
I haven't found a place to download from. The only one is a google drive invalid/expired link. I would thank any help!
VassagoU7XDA said:
I'm looking for official firmwares for Moto One Fusion (not plus). XT2073-2.
Android 10 latest build is: Motorola_One_Fusion_XT2073-2_ASTRO_RETAIL_QPLS30.62-22-3_10
I haven't found a place to download from. The only one is a google drive invalid/expired link. I would thank any help!
Click to expand...
Click to collapse
There you go https://mirrors.lolinet.com/firmware/moto/astro/official/
jmcc30 said:
There you go https://mirrors.lolinet.com/firmware/moto/astro/official/
Click to expand...
Click to collapse
Thank you very much , but sadly can't reach the link. Do you know if still alive?
VassagoU7XDA said:
Thank you very much , but sadly can't reach the link. Do you know if still alive?
Click to expand...
Click to collapse
Oh yeah, they seem to have storage issues, tell me your country and I might find you the link
jmcc30 said:
Oh yeah, they seem to have storage issues, tell me your country and I might find you the link
Click to expand...
Click to collapse
Link was working today , I found and already downloaded the firmware. You helped me so much . Thank you!
VassagoU7XDA said:
Link was working today , I found and already downloaded the firmware. You helped me so much . Thank you!
Click to expand...
Click to collapse
Nice, have great flashing!
.
duvancho said:
good that someone help me what happens els that fhasee a boot.img patched by magisk manager and I damaged the touch tatil of my android
bueno que alguien me ayude lo q pasa els que fhasee un boot.img parcheado por magisk manager y me daño el touch tatil de mi androide
Click to expand...
Click to collapse
That happens when you flash the incorrect boot.img. incorrect I mean another firmware version of the boot.img or a boot.img from another device .
You have to get the correct boot.img and flash it the same way you did it.
* Be sure you have the Moto One Fusion. If you have the Moto One Fusion Plus you have to get the firmware for that specific device. The link in the steps below is for Moto One Fusion.
Don't worry, if you read carefully and follow the next steps you can fix your device.
1. I suggest you to download the most recent firmware from here https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Unzip the downloaded file and get the boot.img
3. Flash it the same way you did it with the incorrect boot.img
4. If that fix the touch issue and everything works fine you can use the same boot.img to be patched by magisk and try the step 3 with the patched boot.img.
5. If step 3 doesn't work return to step 1 and try with another firmware version.
6. If the steps above didn't work, You can flash the full firmware. You have to follow another steps for that. Let me know first if that happens .
,
?
duvancho said:
[QUOTE = "VassagoU7XDA, publicación: 84191209, miembro: 11327551"]
Eso sucede cuando actualiza el archivo boot.img incorrecto. incorrecto me refiero a otra versión de firmware de boot.img o un boot.img de otro dispositivo.
Debe obtener el boot.img correcto y actualizarlo de la misma manera que lo hizo.
* Asegúrese de tener el Moto One Fusion. Si tiene el Moto One Fusion Plus, debe obtener el firmware para ese dispositivo específico. El enlace de los pasos a continuación es para Moto One Fusion.
No se preocupe, si lee atentamente y sigue los siguientes pasos, puede reparar su dispositivo.
1. Le sugiero que descargue el firmware más reciente desde aquí https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Descomprima el archivo descargado y obtenga el archivo boot.img
3. Actualice de la misma manera que lo hizo con el archivo boot.img incorrecto.
4. Si eso soluciona el problema táctil y todo funciona bien, puede usar el mismo boot.img para ser parcheado por magisk e intentar el paso 3 con el boot.img parcheado.
5. Si el paso 3 no funciona, vuelva al paso 1 e intente con otra versión de firmware.
6. Si los pasos anteriores no funcionaron, puede actualizar el firmware completo. Tienes que seguir otros pasos para eso. Avísame primero si eso sucede.
[/ CITAR]
No friend is still the same with the same problem and I'm sad that I bought it for six days and I already damaged it and the guarantee does not cover those failures, I have to repair it on my own merits as well as damage it. I have already installed several firmware from this rom:
astro_retail-user 10 QPLS30.62-22-3 f2517 (moto one fusion) in several pages and it still does not work.
the other would be to install the complete rom but I would not know if the commands are fhasable I got them from a third party page.
Anyway, any help would be very useful to me, thanks.
Click to expand...
Click to collapse
I'm totally sure you can fix your phone. I'm not at home right now , maybe tomorrow at night I will review the firmware file and give you the steps to fash the full firmware.
duvancho said:
[QUOTE = "VassagoU7XDA, publicación: 84191209, miembro: 11327551"]
Eso sucede cuando actualiza el archivo boot.img incorrecto. incorrecto me refiero a otra versión de firmware de boot.img o un boot.img de otro dispositivo.
Debe obtener el boot.img correcto y actualizarlo de la misma manera que lo hizo.
* Asegúrese de tener el Moto One Fusion. Si tiene el Moto One Fusion Plus, debe obtener el firmware para ese dispositivo específico. El enlace de los pasos a continuación es para Moto One Fusion.
No se preocupe, si lee atentamente y sigue los siguientes pasos, puede reparar su dispositivo.
1. Le sugiero que descargue el firmware más reciente desde aquí https://mirrors.lolinet.com/firmware/moto/astro/official/
2. Descomprima el archivo descargado y obtenga el archivo boot.img
3. Actualice de la misma manera que lo hizo con el archivo boot.img incorrecto.
4. Si eso soluciona el problema táctil y todo funciona bien, puede usar el mismo boot.img para ser parcheado por magisk e intentar el paso 3 con el boot.img parcheado.
5. Si el paso 3 no funciona, vuelva al paso 1 e intente con otra versión de firmware.
6. Si los pasos anteriores no funcionaron, puede actualizar el firmware completo. Tienes que seguir otros pasos para eso. Avísame primero si eso sucede.
[/ CITAR]
No friend is still the same with the same problem and I'm sad that I bought it for six days and I already damaged it and the guarantee does not cover those failures, I have to repair it on my own merits as well as damage it. I have already installed several firmware from this rom:
astro_retail-user 10 QPLS30.62-22-3 f2517 (moto one fusion) in several pages and it still does not work.
the other would be to install the complete rom but I would not know if the commands are fhasable I got them from a third party page.
Anyway, any help would be very useful to me, thanks.
Click to expand...
Click to collapse
Try the guide I wrote here: https://forum.xda-developers.com/t/guide-one-fusion-xt2073-fastboot-flashing.4205723/
Tell me if it works
.
duvancho said:
[QUOTE = "jmcc30, publicación: 84194363, miembro: 3905426"]
Prueba la guía que escribí aquí: https://forum.xda-developers.com/t/guide-one-fusion-xt2073-fastboot-flashing.4205723/
Dime si funciona
[/CITAR]
gracias amigo, lo que
[QUOTE = "jmcc30, publicación: 84194363, miembro: 3905426"]
Prueba la guía que escribí aquí: https://forum.xda-developers.com/t/guide-one-fusion-xt2073-fastboot-flashing.4205723/
Dime si funciona
[/CITAR]
gracias amigo, lo que sospechaba tenía los códigos parpadeando mal si funcionó para mí muchas gracias jmcc30 y VassagoU7XDA.
Click to expand...
Click to collapse
Good to know your phone is working again. That guide has exactly the steps I was talking about. Just in case you still interested in magisk, you can use the boot.img file you flashed to fix your phone to be patched by magisk app. The result will be a flashed_boot.img that you can flash using the command:
fastboot flash boot flashed_boot.img
and there you go. If something goes wrong you can flash the original one as follow
fastboot flash boot boot.img
The only rule here is to flash the correct boot.img file. The same your phone is already using. If you use a boot.img from another firmware version you're going to experience the same screen touch problem.
In Spanish (trying to explain in the best way)
En Español (tratando de explicar de la mejor manera)
Es bueno saber que su teléfono está funcionando nuevamente. Esa guía tiene exactamente los pasos de los que estaba hablando. En caso de que todavía estés interesado en magisk, puedes utilizar el archivo boot.img que flasheaste para arreglar su teléfono para que sea parcheado por la aplicación magisk. El resultado será un archivo flashed_boot.img que puedes flashear usando el comando:
fastboot flash boot flashed_boot.img
y ahí lo tienes. Si algo sale mal, puede flashear el boot.img original de la siguiente manera
fastboot flash boot boot.img
La única regla aquí es flashear el archivo boot.img correcto. El mismo que tu teléfono ya está usando. Si usas un boot.img de otra versión de firmware, experimentarás el mismo problema de que no responde la pantalla.
good friends again what happens is that it begins to present errors in the android. the screen goes black every time I use it. and then I have already restarted it from the factory, I have also fasted all the versions of the firmware and it continues with the same failure if someone knows why this happens to me I would thank you
,
Can you make a video (from another phone)
Ok, I asked for a video because I don't understand the problem at all.
By the way, are you sure you flashed the last firmware version?
Can you put here the full firmware file name ?
Have you tried with another firmware versión?
,