New release has arrived but beware! Additional items updated.
Untested version (newest release, don't download): https://drive.google.com/file/d/1V16L3NZBVCwrbJFAo04ckDG_H5gLEalN/view?usp=sharing
This is just the 7.10.12 beta but a bit more optimized than ever. I will be pushing out updates with optimization once a week or month.
This thread is totally about the Redmi 2 (1GB version), Redmi 2 Prime issues won't be covered because you probably won't be using this ROM on it. However this ROM will work like a beast on the 2GB version.
Please do not quote this whole post.
Code:
/*
* Your warranty is now void.
* I am not responsible for bricked devices or dead SD cards.
* Please do some research if you have any concerns about
* how to install/flash this ROM. Or simply ask.
* YOU are choosing to make these modifications, and
* if you point the finger at me for messing up your device,
* I won't be able to help you.
*/
Xposed
SuperSU
Root
BusyBox
Everything will be covered in this thread.
Download links
TWRP : https://www.androidfilehost.com/?fid=962187416754461194
ROM (AFH) : https://www.androidfilehost.com/?fid=6006931924117893861
ROM (GDrive) : https://drive.google.com/open?id=1FDSfd-UwSKMw1nl_ZyTIftRDdkjTrKW1
Xposed : https://www.androidfilehost.com/?fid=6006931924117894520 (Install as a normal apk. Tap on framework > install/update > reboot.)
SuperSU flashable zip: https://www.androidfilehost.com/?fid=6006931924117894517 (Flash it only after MiUi has been completed booted to home/start screen.)
Requirements:
TWRP recovery
Redmi 2 (1GB RAM) phone
Prerequisite:
Do a back up of everything you don't want to lose.
or simply do a nandroid backup.
Note:
You can do factory reset before installing the rom.
However this ROM is downgrade/upgrade compatible which means no matter what your present MiUi is, this will support it.
Update/Upgrade/Downgrade only supported on/over MiUi rom. (If you're on MiUi rom say 9.2.x(last release for Redmi 2)even then you don't need to wipe the data or do a factory reset.)
Procedure:
Copy to external card/memory card. Flash the zip via TWRP recovery. No data wipe/factory reset required (if you're on MiUi). Do factory reset if you want.
OR use adb to sideload the zip while in TWRP adb sideload. Code: adb sideload <filename>.
Cache and dalvik cache wipe is a must.
Known Bugs/Issues:
Music Player's playlist is weirdly arranged while in player screen.
VoLTE doesn't work. Because it is based on 4.4.4 kitkat MiUi8 ROM which never had the VoLTE.
Music Player(if running in background) freezes when RAM is cleaned.
What did I do?:
Removed the possible backdoor SystemAdSolution.apk.
Zipaligned all apks.
Changed few things in build.prop.
Everything under 500mb.
Recommended action post installation:
Do NOT install SuperSU or BusyBox right away. Let the ROM boot for the first time. First boot takes 5 mins.
Download rootuninstaller and remove : BugReport.apk and MiPicks.apk.
You may also remove/uninstall KLO bugreport.
Do NOT uninstall Updater.apk. Turn off auto updates. Do NOT update to newer MiUi versions.
How's it (compared to last/latest MiUi released for Redmi 2)?
It's now more stable when on 4G network. VoLTE/HD calling still not supported.
RAM usage has been optimized. If PUBG is supported, it will run just fine on it.
App opening time has been significantly decreased. You'll enjoy it.
Battery back up has been improved. Charge speed is 1% per minute till 60%.
Latest SuperSU works flawlessly. Xposed works flawlessly. Greenify works.
Few FAQs:
I want Mi Account to work. It will work
I want Mi backup to work. It will work
Can I update play store and apps? Why not? Do it!
I want to update MiUi. Working on it. Just wait and you'll get a better and stable update.
Bootloop! Flash the ROM again from the recovery. Still no factory reset required.
Little bit about the ROM:
ROM Version: 7.10.12
MiUi Version: 7.10.12 Beta Release
ROM Android Version: 4.4.4
ROM Kernel Version: 3.10.28
Stability: Stable
Changelog
1. 11 June 2019 (first release) - HM2014811_signed_061119_211244.zip
[If you're coming from MiUi v9.2.3.0 (last MiUi update for Redmi 2)]
Screen Recorder (stock version) makes a comeback here.
RAM optimization
Battery Improvement. Faster charging (negligible).
More Free RAM when cleaning recent apps. (considering when used Greenify).
Faster App execution than before.
Little to no known bugs.
[If you're coming from any other ROM.]
Fastest MiUi8/9 for Redmi 2 till date.
Everything from the above list follows.
Lemme show you what this MiUi is capable of*. Check attachments.
*The free RAM is because of a RAM booster app, I have uploaded it in the extras post.
Extras
RAM Booster: attached as 2x.apk
Xposed Installer: attached as XpostedInstaller...apk
SuperSU: attached as UPDATE-SuperSU....zip
How to use:
1) RAM Booster: tap on "one click optimization" and then tick select "enable turbo mode" and then tap on "one click randomization" and accept the warning. All app will close and you will have much free RAM from before. Repeat no more than 3 times. Restart the phone once every 24 hours if you're using this booster.
2) Xposed Installer: (SuperSU necessary): Install and update the framework binaries and reboot. And you're done.
3) SuperSU: Install/Flash via TWRP recovery. Wipe Dalvik cache and cache.
Sir @Amosthecoolboy
Is miui 10 possible?
dabakale said:
Sir @Amosthecoolboy
Is miui 10 possible?
Click to expand...
Click to collapse
This thread is currently having the MiUi 8/9.
There might be a possibility of MiUi 10(using themes, afterall MiUi is nothing but a theme) but it will run very slow. It will be nearly useless.
'bro' looks more cool than 'sir'
Any major difference from normal miui?
shivam44 said:
Any major difference from normal miui?
Click to expand...
Click to collapse
RAM optimization and App execution.
Should I wipe system and data if I come from lineage os 15.1?
ttoommxx said:
Should I wipe system and data if I come from lineage os 15.1?
Click to expand...
Click to collapse
unfortunately yes, you will have to wipe the system and data (data especially). Make a nandroid backup before doing so.
@Amosthecoolboy
Please release a build on last stable miui 9
dabakale said:
@Amosthecoolboy
Please release a build on last stable miui 9
Click to expand...
Click to collapse
This one is the first Miui 9. I am working on a version with the latest stable miui 9. Expect it to release before 1st of July.
Amosthecoolboy said:
This one is the first Miui 9. I am working on a version with the latest stable miui 9. Expect it to release before 1st of July.
Click to expand...
Click to collapse
Thanks bro
is there any miui based rom that can bypass miui account?,my phone gets locked and i forget the password
joeyznoise said:
is there any miui based rom that can bypass miui account?,my phone gets locked and i forget the password
Click to expand...
Click to collapse
there is no rom that can do that however there is a tool that can remove or clear the mi account so that you will not be asked to login after the reset.
Why when i try to flash this rom on my redmi 2 prime (2GB Ram Version), it end with fail and say this rom is for wt88047
Ammar MK2 said:
Why when i try to flash this rom on my redmi 2 prime (2GB Ram Version), it end with fail and say this rom is for wt88047
Click to expand...
Click to collapse
wt88047 means 2014811/12/17/18/19/21
and wt86047 means 2014813/816/2014112.
it might not be compatible with redmi 2 prime as I have not tried it.
bro i have 1gb variant but i am getting error 7 in twrp pls help me solve this
vikhyat said:
bro i have 1gb variant but i am getting error 7 in twrp pls help me solve this
Click to expand...
Click to collapse
it may indicate data incompatibility. What rom are you using?
Can you make this compatible for redmi 2 prime (2GB version)?
Ammar MK2 said:
Can you make this compatible for redmi 2 prime (2GB version)?
Click to expand...
Click to collapse
I think it will work on wt88047 which means 2014811/12/17/18/19/21. I don't have the 2GB variant with me to try on.
Related
CyanogenMod is a free, community built, aftermarket firmware distribution of Android 4.4 (KitKat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for CyanogenMod is available in the CyanogenMod Github repo. And if you would like to contribute to CyanogenMod, please visit out Gerrit Code Review. You can also view the Changelog for a full list of changes & features.
Whats working?
Screen
Wifi
Bluetooth
Camera (VGA mode)
Click to expand...
Click to collapse
Whats not working?
Click to expand...
Click to collapse
XDA:DevDB Information
CyanogenMod for the Galaxy Player 5, ROM for the Samsung Galaxy Player 4.0, 5.0
Contributors
iurnait, android1234567, JackpotClavin, Mevordel, zaclimon, Meticulus
ROM OS Version: 4.4.x KitKat
ROM Kernel: Linux 3.0.x
ROM Firmware Required: Need to be running 4.2 or above to install.
Version Information
Status: Stable
Stable Release Date: 2014-07-12
Created 2014-07-06
Last Updated 2014-10-12
Reserved
Notes:
Builds on/after Dec. 24 will have LVMv2 implemented (thanks to @Meticulus), where mmcblk0p13 (/system), mmcblk0p14 (/system/vendor), and mmcblk0p16 (/data) are placed in a logical volume group. This enables /system to be enlarged from 290MB to 600MB (or more as necessary later on). The packages that were removed from the first build (Apollo, File Manager, etc.) have all been re-added. Also, the removal of the vendor hack means that from now onwards, there is no need to reflash gapps after updating the rom.
-Installation Notes
--On the first flash, if the system logical volume is not present or
is less than 600M there is an assert error. This is so that if anyone
needs to backup information contained in /data, they can. In order to
proceed with the installation, the zip must be flashed a 2nd time.
--During the 2nd flash partitions in the logical group are wiped and
the logical volumes are created and formated then the /etc/fstab and
/etc/recovery.fstab are switched so that, when we hand everything off
to the normal rom installer, the new logical volumes are mounted.
-Reverting to a PRE-LVM ROM
--In the YP-G70 the "recovery", be it CWM or TWRP and in the kernel's
recovery-ramdisk. So in order to get a different recovery you just
flash a different kernel. So to get back to a PRE-LVM ROM, you just:
1. Reboot to recovery like normal.
2. Flash your PRE-LVM ROM like normal.
-- Note: All we really care about at this point is that the kernel
(boot.img) gets flashed. Ignore any other errors!
3. After the flash, Power off.
4. Hold volume up and power on, till you get to recovery.
5. Full wipe, including /system
Click to expand...
Click to collapse
Installation Instructions:
1. Reboot to recovery and make backup.
2. Do a full wipe.
3. Flash rom. You will see an error pop up. This is perfectly normal. Flash the rom again
4. Flash Gapps.
5. Flash US kernel if necessary
6. Have fun!
Update Instructions:
1. Reboot to recovery and make a backup
2. Wipe cache/dalvik cache
3. Flash rom
4. Flash US kernel if necessary.
5. Enjoy!
The links below are old downloads; please see the Downloads tab at the top for current release:
ROM: cm-11-20140517-UNOFFICIAL-venturi.zip - 175.13 MB
Gapps: Any will work, but I recommend PA's Mini Modular Package from http://forum.xda-developers.com/showthread.php?t=2397942.
Note: Builds now include a unified kernel, so there is no need to flash an additional kernel for any device
Click to expand...
Click to collapse
Previous builds
ROM: cm-11-20140414-UNOFFICIAL-venturi.zip - 170.86 MB
US Kernel: USA-Kernel-venturi-Apr-16.zip - 6.27 MB
Click to expand...
Click to collapse
ROM: cm-11-20140113-UNOFFICIAL-venturi.zip - 182.07 MB
US Kernel: cm11-USKernel-Jan12.zip - 5.80 MB
Click to expand...
Click to collapse
ROM: cm-11-20131224-UNOFFICIAL-venturi.zip - 176.60 MB
US Kernel: cm11-USKernel-Dec24.zip - 5.76 MB
Gapps: http://www.androidfilehost.com/?fid=23269279319196268
Notes: This includes the fixes made by Meticulus to the camera, so now the back facing camera takes pictures if you set it to VGA. Note that if you are updating from the previous build, there is no need to reflash gapps. However, US users still need to flash the US kernel after flashing this rom.
If you are coming from a build before Dec. 24, keep in mind that data will have to be wiped in order for lvm to be setup. The installer will give you a warning the first time you try flashing and then error out so that you can backup your data if you forgot, and then you can flash the zip again.
Notes:
LVMv2 Implemented, see above notes
Click to expand...
Click to collapse
Rom: cm-11-20131215-UNOFFICIAL-venturi.zip - 158.50 MB
US Kernel: cm11-USKernel-Dec15.zip - 5.29 MB
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/show....php?t=2012857
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Click to expand...
Click to collapse
reserved
iurnait, i buy a GNII and sale my P5.0 but i looking for jobs you a perfect dev and i think you work for NII can you make it?
Samsung GALAXY Note II (GT-N7100) cihazımdan Tapatalk 4 ile gönderildi.
Can't wait to try it out. Been awaiting this release since the Nexus 5 came out. Im so glad it finally came. THANKS ALOT for supporting such an old device.
Initial release:
Notes:
1. Our system partition is a little tight on space, so i had to remove a few packages during compilation so that everything fits. The things i have removed should all be replaceable with 3rd party apps. Here is a list of what has been removed and what you can use as a substitute:
Code:
CMWallpapers - Google images
Apollo - Any music app
CMFileManager - Any file manager
LockClock - Deskclock
CMUpdater - this is for official cm roms so there was really no need for this
2. Use the Gapps I have linked. Standard Gapps wont work because they are too big for the system partition.
3. This is a beta build, so things may crash or eat your cat. Flash at your own risk and make sure to make a backup before flashing
4. The rom includes the INTL kernel, so US users need to flash the US kernel every time after flashing/updating this rom.
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
4. Install US kernel if necessary
5. Install Gapps.
6. Reboot.
7. Profit
8. ???
Links
Rom: http://d-h.st/16c
US Kernel: http://d-h.st/ItN
Gapps (Go to the downloads link and grab the gapps core zip): http://forum.xda-developers.com/showthread.php?t=2012857
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
dorfd1 said:
Would it be possible in the future to be able to repartition an external SD card so you could add more space for system apps?
Sent from my YP-G1 using Tapatalk 4
Click to expand...
Click to collapse
Well a solution we were looking into was increasing the size of the system partition during updating like the aries people have done
Lorddemonrage said:
can't edit build.prop for some reason. other than that so far so good. will post more as i run into it
Click to expand...
Click to collapse
What app are you using to edit build prop?
FweaKiid305 said:
I Originally Flashed The Initial Release Of SlimKat With The Broken Twrp Recovery. Any Way I Can Fix It And Flash CM11?
Sent from my YP-G70 using xda app-developers app
Click to expand...
Click to collapse
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
iurnait said:
If recovery is broken then there is probably not a way to flash this rom with twrp. You could try grabbing the boot.img from the zip and use something like flashify to install it (although im not sure if it would work)
Click to expand...
Click to collapse
I Just Tried To Use It, It Said My Device Is Incompatible. It Seems I'm Stuck On This ROM.
Sent from my YP-G70 using xda app-developers app
This is awesome! Keep up the good work!
I'll probably put screenshots here too.
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Oh my... Flashing this immediately! Thank you!
Sent from my Nexus 7 using Tapatalk 4
---------- Post added at 10:51 PM ---------- Previous post was at 10:08 PM ----------
Testing now with art... You should also note in the op that this is a 4.4.2 build for selecting the correct banks gapps...
Sent from my Nexus 7 using Tapatalk 4
aznflawless said:
Very nice! Cm11 Lovin' it!
Though is there a way to get transparent status bar? Transparent status bar doesn't seem to working.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
zaclimon said:
http://forum.xda-developers.com/showpost.php?p=47712934&postcount=7
That same flag is in your build, just comment it or remove it in your build.prop should suffice though there's something from CM that should come soon regarding this functionnality.
Click to expand...
Click to collapse
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
iurnait said:
What app are you using to edit build prop?
Click to expand...
Click to collapse
Rom Toolbox and the built in text editor, both no go. also unable to apply fonts from rom toolbox and can't delete bootanimation to replace with other bootanimation.
update 12/17: installed SuperSU and romtoolbox now works correctly, seems built in super user not working fully like in initial release of 4.3
Hot diggetty!
however, as I understand the paradigm, steps 7 and 8 are in the wrong order in the instruction list:
iurnait said:
Installation instructions:
1. Make a backup!
2. Wipe data, cache, and dalvik cache.
3. Install rom zip
...
Click to expand...
Click to collapse
annoyingduck said:
So changing low ram to false will enable the transparency? Did I read that correctly?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes. I just did it. Transparent status bar works now!
Works nice for me, thank you for this
For Those who are getting errors (eg. status 7), just flash a 4.3 rom based before jumping from 4.2 to 4.4.
@iurnait
Have you ever heard about Viper4Android? Well, I really like that app, and is a must have for me, but the last rom where it works is CM 10.1 (4.2.2) and looks like that the problem can be fixed by the rom maintener, just have a look here
If is it possible to get Viper4Android works on KitKat in this device should be really nice for me
Slim 7.1.2 build 1.17 (b15)
Download:
* Slim-cherryplus-7.1.2.build.1.17-Jan-20180122-b15.zip
* md5sum: e7a559bd66bbfa32176f39ad21b50c19
* OpenGApps
Currently working:
* network (2G-LTE) dualsim
* Wi-Fi
* BT
* sdcardfs
* GPS
* OTG
* adopted storage
* ussd
* BT headset
* ROM doesn't have root
Also, you can install Magisk
Currently not working
* SIM2 works only 2G
* Stock camera doesn't record video - use Footej Camera to do it
* tap to wake
* youtube 720p60
Installations:
* Go to TWRP
* Wipe system, data, dalvik, cache
* Install RR
or
can also be installed without copying the archive to the phone:
* in TWRP: Adviced - adb sideload - start
* on PC: adb sideload path/to/zip
from RR
if you want go from RR, you need wipe dalvik cache after zip install, and after first boot you need clean data of "Clock" and "Phone" (not "Contacts!")
Updates
* check updates in Settings - About - System Updates
* download update
* reboot device to TWRP
* install the new update of RR
* reboot to System
Thanks to OpenKirin for kernel source code GPL v2.0
XDA:DevDB Information
Slim 7.1.2 build 1.17 (b15) for Honor 4X (Che2-L11, cherryplus) (Kirin 620), ROM for the Honor 4x
Contributors
ksrt12, fell9781, fitsuli
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
ROM Firmware Required: Android 6.x (EMUI 4.x) Europe/Russia
Based On: SlimRoms
Version Information
Status: No Longer Updated
Current Stable Version: b15
Stable Release Date: 2018-01-22
Created 2017-09-28
Last Updated 2019-03-25
All builds: | MEGA
Slim-cherryplus-7.1.2.build.1.17-Dec-20171222-b14.zip
Slim-cherryplus-7.1.2.build.1.17-Dec-20171203-b13.zip
Slim-cherryplus-7.1.2.build.1.15-Weekly-20171027-b11.zip
Slim-cherryplus-7.1.2.build.1.13-Weekly-20171009-b10.zip
Slim-cherryplus-7.1.2.build.1.11-Weekly-20170926-b9.zip
Thanks, Slimrom, light and smooth ...
Good to see another custom ROM for Che2.
This is great, I am going to try both of these (Slim and RR). What is the main difference between EMUI and SlimROM except for it's smaller? Reviews?
Bob1900 said:
This is great, I am going to try both of these (Slim and RR). What is the main difference between EMUI and SlimROM except for it's smaller? Reviews?
Click to expand...
Click to collapse
-Newer android version
-Some(most) people like slim/RR/some other custom rom overlay better.
-If you had some problems in EMUI with background user apps stopping (like whatsapp message notifications arriving too late or google photo doesn't sync) you won't have those problems any more.
For me battery in deepsleep goes bit faster on RR than it went on EMUI.
EMUI ~3-8% in 10h
RR ~10-14% in 10h
But maybe it's because the background apps work like you would expect them to work. Or maybe it's something else.
keikari said:
EMUI ~3-8% in 10h
RR ~10-14% in 10h
Click to expand...
Click to collapse
Thanks. I get only about ~10% per 10h on my EMUI, and I'm running modaco rom, which is a slimmed down version of stock EMUI. I haven't had any problems with background apps or other things on modaco, but I like the idea of finally advancing to Nougat on kirin with a functional dual sim.
What about Apps2SD or adoptable storage? Maybe it's not necessary on Slim or RR? Honor 4x is almost useless without adding some internal storage via some such solution.
Bob1900 said:
Thanks. I get only about ~10% per 10h on my EMUI, and I'm running modaco rom, which is a slimmed down version of stock EMUI. I haven't had any problems with background apps or other things on modaco, but I like the idea of finally advancing to Nougat on kirin with a functional dual sim.
What about Apps2SD or adoptable storage? Maybe it's not necessary on Slim or RR? Honor 4x is almost useless without adding some internal storage via some such solution.
Click to expand...
Click to collapse
I think System will always take ~4GB (unless you do some re-partitioning) so you would still need Apps2SD or adoptable.
Wild_Spark said:
Youtube 720p60 works fine?
Click to expand...
Click to collapse
No
hello,
the rom is not compatible with g620s l01
you should edit a link because you put hhttps ^^
keikari said:
I think System will always take ~4GB (unless you do some re-partitioning) so you would still need Apps2SD or adoptable.
Click to expand...
Click to collapse
Is adoptable storage improved in nougat? It was not good enough in MM to really expand storage, so Apps2SD was needed back then.
Bob1900 said:
Is adoptable storage improved in nougat? It was not good enough in MM to really expand storage, so Apps2SD was needed back then.
Click to expand...
Click to collapse
No idea, I haven't tested adopted storage because Apps2SD is more flexible.
Will it work on che1-L04
overwatch1234567890 said:
Will it work on che1-L04
Click to expand...
Click to collapse
No, it should not work.
keikari said:
No, it should not work.
Click to expand...
Click to collapse
Why
overwatch1234567890 said:
Why
Click to expand...
Click to collapse
http://www.phonemore.com/compare/phones/huawei-honor-4x-che1-l04-vs-huawei-honor-4x-che2-l11/4067719
Scroll down to hardware.
overwatch1234567890 said:
Why
Click to expand...
Click to collapse
man u have most of roms in this device ...
https://forum.xda-developers.com/ho...-lineageos-14-1-huawei-g620s-honor-4-t3547682
https://forum.xda-developers.com/honor-4x/development/rom-mokee-7-1-huawei-g620s-honor-4-4x-t3535922
https://forum.xda-developers.com/honor-4x/development/rr-n-7-1-2-t3610975
the last one is the same rom for us che2-l11 it can work for ur model but slim7 and remix for che2-l11 dont work for ur version but these links work for u
---------- Post added at 11:08 AM ---------- Previous post was at 10:54 AM ----------
overwatch1234567890 said:
Why
Click to expand...
Click to collapse
man u have most of roms in this device ...
https://forum.xda-developers.com/hon...nor-4-t3547682
https://forum.xda-developers.com/hon...-4-4x-t3535922
https://forum.xda-developers.com/hon...7-1-2-t3610975
the last one is the same rom for us che2-l11 it can work for ur model but slim7 and remix for che2-l11 dont work for ur version but these links work for u
is it possible to make a custom rom for cherryplus that will utilize the storage being used by the system?!? like from 3.6 GB usable internal storage to 5-6 GB?!? I mean that would be a great help!
mike13dash said:
is it possible to make a custom rom for cherryplus that will utilize the storage being used by the system?!? like from 3.6 GB usable internal storage to 5-6 GB?!? I mean that would be a great help!
Click to expand...
Click to collapse
I think you could try to re-partitioning your device. Though it might be a bit risky if you are not sure what you are doing. It's safer to just use adopted storage or apps2sd to get more space and performance lost in that is unnoticeable in most cases (and I think it only affects to loadingtimes)
keikari said:
I think you could try to re-partitioning your device. Though it might be a bit risky if you are not sure what you are doing. It's safer to just use adopted storage or apps2sd to get more space and performance lost in that is unnoticeable in most cases (and I think it only affects to loadingtimes)
Click to expand...
Click to collapse
Agreed. There are only a few apps that load significantly slower if you link them with Apps2SD, and you can put those apps on /system partition. (For example "HereWeGo" navigation app takes very long time to load, like ~25 sec.)
It have the same battery consomming like RROS?
I think you should compare with Che2-ul00 B580 last build, only 1~2% in 12hours at deepsleep.
***Using Europeen oem***
miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version
LANGUAGES: CHINESE / ENGLISH
I have it installed a day ago and at the moment it's going very well
Google installer v2.0 to install google play services
DOWNLOAD GOOGLE INSTALLER: https://www55.zippyshare.com/v/PNflCoDB/file.html
DOWNLOAD miui_MINote2_8.6.1_b364d59a57_8.0 (MIUI 10) BETA Version: https://bigota.d.miui.com/8.6.1/miui_MINote2_8.6.1_b364d59a57_8.0.zip
REGARDS
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
any screen shots, how performs, any major bugs, overall experience.
FontesR said:
I know it is in beta stage so it has bugs, but do you think it can be used as a daily driver rom?
Click to expand...
Click to collapse
Sipi1302 said:
any screen shots, how performs, any major bugs, overall experience.
Click to expand...
Click to collapse
Been using it for like 2-3 hours,working pretty solid till now without encountering any bug. Battery is a little off compared to xiaomi.eu but I guess maybe because it is the first charge cycle. I haven't done any gaming yet,so not sure about the heating situation. Camera also works fine.
so in short,Yes it is usable as a daily driver.
Based on the file name it's still Oreo 8.0 based right?
Pantherx12 said:
Based on the file name it's still Oreo 8.0 based right?
Click to expand...
Click to collapse
Yes......
Is OTA available if I do not have a beta account?
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Naxxÿ said:
Can I install it with TWRP ?
Sent from my MI Note 2 using Tapatalk
Click to expand...
Click to collapse
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
vcx77 said:
Yes.......
Before installing by twrp, disable device search and close your xiaomi account in the mobile, then restart in twrp and make full wipes included internal memory and format data, restart again in twrp and install
Click to expand...
Click to collapse
Thanks but I'm on lineage 15.1 atm so I guess I only need the wipes [emoji6]
Sent from my MI Note 2 using Tapatalk
After two days with it, no failure and smooth operation, very good battery and the perfect camera, no problem with any application, routed with magisk-v16.4 beta without problems
Is there a new bokeh mode in the camera?
mindenfrak said:
Is there a new bokeh mode in the camera?
Click to expand...
Click to collapse
No.
That's for phones that support bokeh mode by default.
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Oh btw you don't need any Google installer APK you can just download the installer from the included Mi app store.
I will test out the rom today but I think I will restore my Lineage backup till the EU version is out....... the rom is great but there is way to much Chinese bloatware [emoji6]
Sent from my FDR-A03L using Tapatalk
Naxxÿ said:
Installed last night, all went smooth. The performance is stellar and every is working fine. Only issue I had was that somehow my TWRP recovery was overwritten by Xiaomi recovery.
Click to expand...
Click to collapse
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
To me this official MIUI does not overwrite me the twrp
This rom encrypted and
erased my phone?
vcx77 said:
To me this official MIUI does not overwrite me the twrp
Click to expand...
Click to collapse
Interesting haha . Normally it should've flashed you the MI Recovery. Are you using the official TWRP?
maxraf21 said:
This rom encrypted and
erased my phone?
Click to expand...
Click to collapse
That is what official MIUI does ...
Always have a backup of your stuff not in the phone.
I do not use the official twrp, I use this https://forum.xda-developers.com/mi-note-2/development/twrpscorpio3-2-1-1tools-6blue-t3798956
So that there are no problems if you are in MIUI make a backup and before putting the rom deactivate from the mobile the device search and the account of xiaomi
once done reboot in twrp and make full wipes internal memory included and format data (if it gives montage error restart twrp again and perform again full wipes and format data) restart in twrp again and install, should not give you any problem with encryption
I do it like that and have never given me problems
and I do not overwrite the twrp either
alexmanu1 said:
I'm 100% agreeing with you, but keep in mind that all the official MIUI ROMs are overwritting the recovery
Click to expand...
Click to collapse
Yeh might be but i never installed official MIUI ROMs before this one. Anyway took me 30 sec to hook up ADB and then Fastboot flash TWRP back. I rooted with Magisk and now all is perfect might even stay on this if i can tweak a few things to my liking.
A2017X_8.x non-treble Adreno 530 GPU DriverFix [email protected]
Suited for : NON-TREBLE OREO 8.x
ALWAYS TAKE A BACKUP BEFORE PROCEEDING !!!
This aroma installer brings you the latest Non-Treble Adreno 530 GPU drivers for a better gaming experience. Less heat, higher fps,…
Source & credits: https://forum.xda-developers.com/mi-mix/development/driver-adreno-530-540-gpu-driver-t3815853
I updated them for our Axon7 so you ony have to install the zip
[B]Installation : [/B]
1. Take a full backup !
2. Flash Adreno GPU Drivers zip
3. Reboot
4. Done !
5. Check aida64 app from playstore / the aida64/display will either show [email protected] in stead of [email protected] In that case you’ve successfully installed new drivers !
Pictures below show GPU before and after install. (this is on 8.1 treble but you will see something similar. As long as it changed to [email protected] you're all ok)
ENJOY !
Huge thanks to @totmakina for testing it on his B23 :good:
Works on b23 china stock firmware?
i guess it is just opengl?
ive looked inside and saw some vulkan api files....nice,gonna try this asap
works here on stock rooted b23 oreo
Thanks
Thanks for the thread. i kinda forgot about this completely (im moving soon and currently im using my phone for xda since my laptop isn't available for me yet)
Don't forget that ppl with stock oreo rom will also get vulkan api back (since its completely missing in stock oreo, at least in the G version)
raystef66 said:
(...)
Click to expand...
Click to collapse
Don't know if it's my carrier, but I get Phone Not Allowed and no signal after I flash this.
I'm on Lineage 20190130; clean install.
GodOfPsychos said:
Thanks for the thread. i kinda forgot about this completely (im moving soon and currently im using my phone for xda since my laptop isn't available for me yet)
Don't forget that ppl with stock oreo rom will also get vulkan api back (since its completely missing in stock oreo, at least in the G version)
Click to expand...
Click to collapse
Same on china oreo,but this driver zip does the upgrade very good
bootloops/stuck on pinguin on stock b23 oreo ( no root,no magisk)
Predatorhaze said:
bootloops/stuck on pinguin on stock b23 oreo ( no root,no magisk)
Click to expand...
Click to collapse
This driver fix is tested on all stock roms now and all were ok after upgrade. Only thing can happen, noticed on Pie, but then we're talking about the treble driverfix, is messing up your screen and the ability to responsiveness due to un-clean flash.
On Oreo stock there's no issue.
You might find the reason on something else.
raystef66 said:
This driver fix is tested on all stock roms now and all were ok after upgrade. Only thing can happen, noticed on Pie, but then we're talking about the treble driverfix, is messing up your screen and the ability to responsiveness due to un-clean flash.
On Oreo stock there's no issue.
You might find the reason on something else.
Click to expand...
Click to collapse
it worked before on b23 stock with magisk and modified boot.img.
I saw you tested this on stock b23 yes,but was it rooted(magisk) or not?
if its something else,then its the motherboard.Ive had treble system but then went back to b23 trough edl.I did not removed the vendor partition before i flashed b23 in miflash
i will try again with the boot img and magisk installed
@raystef66 works on stock b23 rooted magisk 18.1
Works on b02 Oreo with magisk 16.7, but had to wipe cache, otherwise bootloop.
Can i flash this through stock recovery, or only per twrp ?
Im on B23 chinese oreo
Tunox said:
Can i flash this through stock recovery, or only per twrp ?
Im on B23 chinese oreo
Click to expand...
Click to collapse
You could try using stock recovery (install zip from SD) but no garantee (mount system problem)
If you're up to flashing a custom recovery like twrp3218 or 3230 throught EDL, you can do that by renaming it to recovery.img and put it into the folder flash/recovery (in the EDL TOOL). Just flash the recovery, reboot into twrp recovery and flash the file.
After that you can flash the initial stock recovery again if you want.
Ui freeze sometimes with this driver.Sometimes it force reboots,other time it says system has stopped,other time the screen come back.It also drains more power for me
Predatorhaze said:
Ui freeze sometimes with this driver.Sometimes it force reboots,other time it says system has stopped,other time the screen come back.It also drains more power for me
Click to expand...
Click to collapse
As mentioned these drivers are tested on latest Oreo stock roms, for all versions. And all went flawless afaik and no power drains.
Which rom are you applying it to ?
raystef66 said:
As mentioned these drivers are tested on latest Oreo stock roms, for all versions. And all went flawless afaik and no power drains.
Which rom are you applying it to ?
Click to expand...
Click to collapse
Power drain maybe not true but the ui freeze is.I tried on oreo custom and China stock oreo
A2017X_8.x non-treble Adreno 530 GPU DriverFix [email protected]
Suited for : NON-TREBLE OREO 8.x
ALWAYS TAKE A BACKUP BEFORE PROCEEDING !!!
This MODULE brings you the latest Non-Treble Adreno 530 GPU drivers for a better gaming experience. Less heat, higher fps,…
Source & credits: https://forum.xda-developers.com/mi-mix/development/driver-adreno-530-540-gpu-driver-t3815853
I updated them for our Axon7 so you ony have to install the module within magisk and reboot !
Installation :
1. Take a full backup !
2. Flash Adreno GPU Drivers Module in Magisk18.x
3. Reboot
4. Done !
5. Check aida64 app from playstore / the aida64/display will either show [email protected] in stead of [email protected] In that case you’ve successfully installed new drivers !
ENJOY !
Delete
I confirm. The patch works on my A2017U, 8.0.0 stock B20. I used adreno 5xx - v313 rev23 - non-treble.zip.
While with 330 and 331 the phone wouldn't boot.
raystef66 said:
A2017X_8.x non-treble Adreno 530 GPU DriverFix [email protected]
Suited for : NON-TREBLE OREO 8.x
ALWAYS TAKE A BACKUP BEFORE PROCEEDING !!!
This MODULE brings you the latest Non-Treble Adreno 530 GPU drivers for a better gaming experience. Less heat, higher fps,…
Source & credits: https://forum.xda-developers.com/mi-mix/development/driver-adreno-530-540-gpu-driver-t3815853
I updated them for our Axon7 so you ony have to install the module within magisk and reboot !
Installation :
1. Take a full backup !
2. Flash Adreno GPU Drivers Module in Magisk18.x
3. Reboot
4. Done !
5. Check aida64 app from playstore / the aida64/display will either show [email protected] in stead of [email protected] In that case you’ve successfully installed new drivers !
ENJOY !
Click to expand...
Click to collapse
Thanks for this!
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 10.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 10.0 DBT XXU3BTK1 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v4.0
Rebased to XXU3BTK1 Android 10.0 (Security Patch from 01.11.2020)
Hopefully Fixxed Bluetooth-Probleme - Should work witout BT Patcher.
Changelog v3.1
Fixxed bluetooth-probs
Patching of bluetooth didnt work anymore, so you have to use now Bluetooth Library Patcher as Magisk Modul, otherwise you lose every reboot your bluetooth connections
Changelog v3.0
Rebased to XXU3BTH4 Android 10.0 (Security Patch from 01.09.2020)
Changelog v2.0
Rebased to XXU3BTFN Android 10.0 (Security Patch from 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Changelog v1.0
Initial Release
Rebased to XXS3ATE3 Android 9.0 (Security Patch from 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself
Alternatively i can provide the patched TWRP see latest twrp file above
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Q 10.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Troubeshooting
If you got an bootloop or it stays on samsung logo, make a fullwipe. Otherwis it wont boot correctly into root partition.
I had the same problems. Only a fullwipe solved it.
Credits
Samsung
topjohnwu
MrWaehere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 10.x Q
Version Information
Status: Stable
Current Stable Version: 30.08.2020
Created 2020-06-01
Last Updated 2020-09-29
hanspampel said:
Analogous to my other projects I present here a custom ROM on stock basis. This ROM is based on the 9.0 DBT FW. It is not supposed to become something big. Actually it was only meant for me, but I thought, maybe it would help some of you who don't want to flash the FWs with Odin.
The ROM is mostly "stock-alike" because I'm no friend of "heavy modifications" anymore.
Neither I nor XDA is responsible for any damage to your device. You flash it at your own risk!
Before you start, make a Nandroid(Backup) of your system. Safe is safe!
Features
Based on last Android 9.0 DBT XXS3ATE3 FW
DBT as CSC active
Stock Kernel
Bluetooth Patch
Removed RMM
Odexed (for better Performance)
Knox-free
A bit debloated (Knox- and MS-stuff)
Stock alike
Flashbable through Custom Recovery
Changelog
Changelog v1.0
Initial Release
Rebased auf XXS3ATE3 Android 9.0 (Security Patch vom 01.05.2020)
What do you need?
actual Custom Recovery, >>here!!<<
my FW (Zip)
are familiar with the matter of flashing:winki:
How to get Root?
You have to patch the TWRP yourself, alternatively I can provide the patched TWRP.
Pictures
None, since everybody knows the Stock FWs
Download
Stock ROM Pie 9.0 (AndroidFileHost)
Download Modem/Bootloader
Flashable_T510_Firmware (flash it through recovery - follows next!!)
How-To flash:
Place the Zip on the internal or better external memory.
Boot into Recovery -> Hold Vol. Up at restart
--> Fullwipe if coming from another ROM
Then click on install in TWRP
Searches the folder where you put the Zip in
And flash them now by clicking on the zip and dragging the slider to the right at TWRP
Then reboot -> Reboot to System = Boot with Magisk!
The reboot with a fullwipe usually takes a while - can take up to 10 minutes. So keep calm.
Credits
Samsung
topjohnwu
MrWhaere
ianmcd
Magendanz
twrp
and others i forgot
If you like it, hit thanks.
XDA:DevDB Information
Stock ROM, ROM for the Samsung Galaxy Tab A series
Contributors
hanspampel
ROM OS Version: 9.x Pie
Version Information
Status: Stable
Current Stable Version: 01.06.2020
Created 2020-06-01
Last Updated 2020-06-01
Click to expand...
Click to collapse
MOD EDIT : No need to quote the ENTIRE first post ...
Does this rom lag or feel sluggish to you?
Sent from my SM-T510 using Tapatalk
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
klemen241 said:
No problem here, using it with custom kernel with oc and everything works fine. As fast as nexus stock
Click to expand...
Click to collapse
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
zfk110 said:
which kernel are you using on this rom? is it this one?
https://forum.xda-developers.com/galaxy-tab-a/development/kernel-infinity-kernel-1-2-ask1-t4028739
I thought it was made for LineageOS?
Click to expand...
Click to collapse
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
klemen241 said:
Yea that's the one. Works with stock too, I checked the frequencies after flashing and it's oc
Click to expand...
Click to collapse
What about if you play games? like Pokémon go will it runs hot??
zfk110 said:
What about if you play games? like Pokémon go will it runs hot??
Click to expand...
Click to collapse
I only use it for Netflix, so no idea. I think it's safe
hanspampel said:
Not more like on Stock. Samsung didnt made a good job with this Tab. It feels more sluggish as on my old Tab A 2016. Maybe its the SoC or the OneUi stuff.
Click to expand...
Click to collapse
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
zfk110 said:
Its failing CTS profile. any idea how to fix it? on stock firmware without kernel
Click to expand...
Click to collapse
no.. safetynet now does hardware checks
Update to Q-based BTFN FW.
Changelog v2.0
Rebased auf XXU3BTFN Android 10.0 (Security Patch vom 01.07.2020)
Be on android 10 fw, otherwise it wont work!!!
Read Troubleshooting in OP!
Thanks for the update.
I am currently using your v1.0 (Android 9).
To update to v2.0 (Android 10) i have to flash stock rom XXU3BTFN first and repeat the procedure to patch TWRP, flash TWRP, flash multidisabler ...?
does the rom work with the T510N version also?
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
hanspampel said:
@seppfx
Yepp, you need latets bootloader and twrp etc. Otherwise it won't boot.
@AndroSysQ
Im not confirm what's the difference between both models.
Click to expand...
Click to collapse
from what i have read it has 3GB instead of 2GB ram and 64GB instead of 32GB storage.
I think the rest of the internal components are the same.
It is the wifi(T510/T510N) version and not the LTE(T515/T515N)
Hmm try it out if you want. I don't guarantee it will work. If so, it could be that it show not the correct Infos about your tab, ram, emmc etc.
@seppfx
You can push the twrp inside the AP_ file, delete recovery.img and rename twrp to this one. So you don't have to format Data again.
I'm on Android 10. And as you know that TWRP version is T510XXS3ATE3 and TWRP is still not available for T510XXU3BTFN So how am I suppose to do all these stuffs. Can I flash your file through TWRP on Android 9 ?
Please clear my doubts.
No, you must be on android 10, as i said before. Flash Magendanz TWRP. There is a q twrp in his thread.
Can you please post a link of that TWRP ? I'm unable to find that.
Take a look at here.