Hello to all
I've tried this recovery:
https://os.revtechs.me/revolutionos-recovery/
It seems to work perfectly, even with pin and fingerprint. It's not asking for a password like the other recoverys, but data is completely usable.
Looks interesting.. can replace current twrp without formatting data and having to reinstall ROM?
badaas said:
Looks interesting.. can replace current twrp without formatting data and having to reinstall ROM?
Click to expand...
Click to collapse
I've flashed the recovery without formating and no problems.
Laptapper said:
Hello to all
I've tried this recovery:
https://os.revtechs.me/revolutionos-recovery/
It seems to work perfectly, even with pin and fingerprint. It's not asking for a password like the other recoverys, but data is completely usable.
Click to expand...
Click to collapse
Mine still just reboot the phone after the command "fastboot boot xxx.img"
hoanvu1100 said:
Mine still just reboot the phone after the command "fastboot boot xxx.img"
Click to expand...
Click to collapse
Recovery is recovery.img not boot.img
I tried ROS recovery when it was released but it couldn't decrypt the data on my MI 9 so I ended up switching back to the siankatabg version of TWRP. There hasn't been a new build of ROS TWRP since the first one so I'm not sure why it's apparently working OK for you when it didn't for me.
Did you install from a different version of TWRP or by using fastboot on a computer?
Were fingerprints or pin already enabled before you installed ROS TWRP or did you add them after flashing the recovery?
hoanvu1100 said:
Mine still just reboot the phone after the command "fastboot boot xxx.img"
Click to expand...
Click to collapse
You can't boot an image on Mi9.
The only way is to flash it.
Fastboot flash recovery *name of recovery*.img
Kollachi said:
You can't boot an image on Mi9.
The only way is to flash it.
Fastboot flash recovery *name of recovery*.img
Click to expand...
Click to collapse
I was like
Fastboot flash recovery xxx.img
Fastboot boot xxx.img, but it just keep restarting
Gửi từ MI 9 của tôi bằng cách sử dụng Tapatalk
hoanvu1100 said:
I was like
Fastboot flash recovery xxx.img
Fastboot boot xxx.img, but it just keep restarting
Gửi từ MI 9 của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
1. Flash recovery with fastboot.
2. Press volume up and power button to boot directly into TWRP. Don't let the system reboot itself.
Kollachi said:
1. Flash recovery with fastboot.
2. Press volume up and power button to boot directly into TWRP. Don't let the system reboot itself.
Click to expand...
Click to collapse
Thank you [emoji173] I'll try it agian whenever I have time
Gửi từ MI 9 của tôi bằng cách sử dụng Tapatalk
hoanvu1100 said:
Thank you [emoji173] I'll try it agian whenever I have time
Gửi từ MI 9 của tôi bằng cách sử dụng Tapatalk
Click to expand...
Click to collapse
Yes, do that. This method works, was also confirmed by other people
Related
Tested only in Xperia M4 Aqua E2303 with firmware 26.3.A.1.33.
Root/ SuperSU 2.78
1. download this boot.img: http://www39.zippyshare.com/v/smp1HMAj/file.html
2. Copy into the adb folder.
3. Boot into fastboot mode, then type in adb shell:
fastboot devices
fastboot flash boot boot.img
TWRP v3.0.2.0
1. Download this recovery.img:http://www82.zippyshare.com/v/xHcjnORE/file.html
Credits toiSpecialist
2. Copy into the adb folder.
3. Boot into fastboot mode, then type in adb shell:
fastboot devices
fastboot flash recovery recovery.img
Unplug and rboot your device.
Now you have ROOT with SuperSU 2.78 with TWRP Recovery
P.S: you need UNLOCKED BOOTLOADER
I modded and repacked my "boot.img" file using this tutorial:http://forum.xda-developers.com/xperia-z5/development/root-automatic-repack-stock-kernel-dm-t3301605
Greetings
ENJOY!!
Great job!
Just done it and no bug seems to appear!
Thanks
Did this boot only for 2303,or I can flash it on 2312
Отправлено с моего E2312 через Tapatalk
good job
can you make it so cwm recovery update is possible not possible to unlock bootloader
Does anyone try on 2312?
When i type the command for flashing it says that it can't open boot.img
E2303
Flashed boot.img via fastboot. Everything works great. Thanks!
Gray47Maxx said:
Did this boot only for 2303,or I can flash it on 2312
Отправлено с моего E2312 через Tapatalk
Click to expand...
Click to collapse
E2312 boot.img:http://www52.zippyshare.com/v/JhQa3m6d/file.html
nrokos said:
When i type the command for flashing it says that it can't open boot.img
Click to expand...
Click to collapse
Strange!! Try download the file. again.
How enter in recovery
Flashed both files, boot.img and recovery.img. After normal reboot SuperSu installed and working. The question is how reboot to recovery?
Thank for your good work.
cfgh said:
The question is how reboot to recovery?
Click to expand...
Click to collapse
Hello,
To boot into recovery mode :
1) Power off your phone
2) Power on your phone using power button + volume down button at the same time, until you see the "SONY" logo.
Then release both and wait until recovery loads.
madsin said:
Strange!! Try download the file. again.
Click to expand...
Click to collapse
Its ok I fixed it ?
WormsWarII said:
Hello,
To boot into recovery mode :
1) Power off your phone
2) Power on your phone using power button + volume down button at the same time, until you see the "SONY" logo.
Then release both and wait until recovery loads.
Click to expand...
Click to collapse
Many thanks.
nrokos said:
When i type the command for flashing it says that it can't open boot.img
Click to expand...
Click to collapse
Did you cd into adb folder before ran adb commands?
Anyway, after unlocking bootloader it worked like a charm, thank you!
Model E2306?
for several days I tried to root my e2303 with this tyt, but unsuccessfully . Finaly i flashed boot.img with flashtool in fastboot mode and got supersu... If i dont need twrp, it is ok, and enough for root?
Thanks!
sorry for my english
Hi,
thanks for the work, i unlock my phone and then i flash boot.img -> a can get access to root.
i'v installed TWRP, but i think it's too many options for me, reflash boot.img.
Jarix, for root, you only need to flash boot.img
regards
Please, boot for e2306? Thanks
Works Great for my AT E2303 with my 26.3.A.1.33 , Thank you
@madsin the recovery is mine lol
Hello, i have HTC Desire 610 A3_TL and i tried to install trwp and i think i installed the wrong one because once i have installed it, it rebooted back to fastboot and now when i try and enter recovery mode or even reboot the phone it goes straight back into fastboot. And i was stupidly not to make a backup before i started. i hope someone can help me.
Also it says for me
***TAMPERED***
***UNLOCKED***
A3_TL PVT SHIP S-ON
HBOOT-3.18.0.0000
RADIO-1.101.1161.16.24
OS-1.35.1400.1
And has the date of Jul 3 2014,
also i may have installed a Developer Rom as it says this Build for developer use only.
Thanks
Power off, charging 1% you try into fastboot , ok connect with PC , and flash TWRP again . Reboot twrp flash ROM and Gapps . Reboot !
( You download twrp recomment 2.8.7 , Rom CM 12.1 and Gapps , put in SD card )
Gửi từ MiPhoneX bằng cách sử dụng Tapatalk
I have same problem as xAnzeh. When I try to flast twrp it goes sucessfully but when booting to recovery it goes back to fastboot. How to check what is problem? I cannot flash with original RUU because boot loader is unlocked and when locking it, it is giving me error as in picture. Please advise.
twrp 3.0.2.0 is working properly in my device but when I flash the twrp 3.1.1.0 it stuck and show entering recovery but don't enter into recovery!!!! only shown that entering recovery and reatart again and see the same message. Is there any solution!!!!!
Go to Fastboot ,
fastboot erase cache
fastboot 3.0.2.0 again
The divices is old , you don't upgrade twrp . I use 2.7.1.0 working perfect
Sorry my english, i'm was born Viet Nam
Gửi từ MiPhoneX bằng cách sử dụng Tapatalk
I think the title speaks for itself but here's the story
I recently flashed the Oreo kdz on my h850, so I lost TWRP and Magisk, but I cannot live without root access. Since my phone's volume down button is not working, is there any way I can install TWRP? Using adb and fastboot commands I can flash it, but if I boot into the system the recovery will be overwritten, so I really have to boot to the recovery.
Any ideas?
(EDIT: nevermind, I forgot that recovery is overwritten first boot without root. How about "fastboot boot recovery xxxx.img"?
This will boot temporarily into twrp where you can root device and flash twrp permanently )
Enable adb in developer option, and using a computer type
"adb reboot bootloader"
And then flash twrp
"fastboot flash recovery xxxxx.img"
Then boot into the os and type "adb reboot recovery" to enter twrp
Enviado desde mi LG-H850 mediante Tapatalk
jaggyjags said:
(EDIT: nevermind, I forgot that recovery is overwritten first boot without root. How about "fastboot boot recovery xxxx.img"?
This will boot temporarily into twrp where you can root device and flash twrp permanently )
Enable adb in developer option, and using a computer type
"adb reboot bootloader"
And then flash twrp
"fastboot flash recovery xxxxx.img"
Then boot into the os and type "adb reboot recovery" to enter twrp
Enviado desde mi LG-H850 mediante Tapatalk
Click to expand...
Click to collapse
I guess it's worth the try
But how can I permanently flash it?
leonardovallem said:
I guess it's worth the try
But how can I permanently flash it?
Click to expand...
Click to collapse
Twrp can flash .img files
Enviado desde mi LG-H850 mediante Tapatalk
jaggyjags said:
Twrp can flash .img files
Enviado desde mi LG-H850 mediante Tapatalk
Click to expand...
Click to collapse
yeah you're right!! totally forgot about that!! thank you so much, I'll try it out, hopefully it'll work. Thanks again!!!
Hi,
I'm sick of the boot warning messages that pops up whenver i boot my phone. How do I restore stock bootloader?
Some of the things I tried and failed are:
Factory reset
fastboot flash system system.img (I can only get this to work if I leave bootloader unlocked)
fastboot oem lock (unlock code) This also work but I will not be able to boot back into system, it would boot into eRecovery instead.
hungrymr2 said:
Hi,
I'm sick of the boot warning messages that pops up whenver i boot my phone. How do I restore stock bootloader?
Some of the things I tried and failed are:
Factory reset
fastboot flash system system.img (I can only get this to work if I leave bootloader unlocked)
fastboot oem lock (unlock code) This also work but I will not be able to boot back into system, it would boot into eRecovery instead.
Click to expand...
Click to collapse
Only way would be reinstalling stock using HuRUpdater, NoCheck or dload. After you have done that you can relock from fastboot.
ante0 said:
Only way would be reinstalling stock using HuRUpdater, NoCheck or dload. After you have done that you can relock from fastboot.
Click to expand...
Click to collapse
In this way relock from fast boot will lock bootloader?
Inviato dal mio BLA-L09 utilizzando Tapatalk
L3onX said:
In this way relock from fast boot will lock bootloader?
Inviato dal mio BLA-L09 utilizzando Tapatalk
Click to expand...
Click to collapse
It will Re-lock bootloader. It will say Relocked in fastboot but the warning will go away.
L3onX said:
In this way relock from fast boot will lock bootloader?
Inviato dal mio BLA-L09 utilizzando Tapatalk
Click to expand...
Click to collapse
ante0 said:
It will Re-lock bootloader. It will say Relocked in fastboot but the warning will go away.
Click to expand...
Click to collapse
But make sure you are completely stock before doing it as it will fail to boot if any of your partitions are modified (If you have TWRP for example it will fall back to sec_recovery, but not for the other partitions)