Hi,
I have just got the AmazFit pace and it has synced up to my phone (Pixel 3A) without any trouble.
I get the notifications etc on the watch.
However my app says 0 for the step count, no sleep data, no heart rate data etc.
i have tried factoery reset on the watch and installing ver 2.9 of the app on my phone with no success.
when i press sync on the phone it connects to wifi and claims to have successfully synced data but it isnt coming through to the phone.
Any help would be great.
I've tried searching for similar threads, the only thing similar i've found mentioned his firewall blocking the app but i dont think that will be the issue.
Thanks
The watch is brand new? Was it ever paired with another device previously? If yes, it has to be properly unpaired first, or activity/health data won't be synced properly. If no, it may take 24h for the data to sync properly. Try recording a dummy Elipitical activity and using the Sync from watch (it needs to connect to a 2.4GHz access point).
lfom said:
The watch is brand new? Was it ever paired with another device previously? If yes, it has to be properly unpaired first, or activity/health data won't be synced properly. If no, it may take 24h for the data to sync properly. Try recording a dummy Elipitical activity and using the Sync from watch (it needs to connect to a 2.4GHz access point).
Click to expand...
Click to collapse
Thanks for the reply
yeah, the watch is brand new.
My partner bought it, tried pairing it with her phone and had the same issue. I unpaired it, the watch factory reset when unpaired and then i tried it with mine.
I expected the pedometer to increase in real time.
does it sync via bluetooth or only via wifi?
Edit: I tried a dummy elliptical and that has synced. But im still not getting any heart rate or steps info even though i have done a few heart rate readings and obviously taken some steps
Sync is actually done in two parts: first the phone pulls data from watch using Bluetooth, then pushes the data to the cloud (Huami) via WiFi (this last part is what is done if you use Sync from watch settings). Only when the data is pushed successfully to the could it will be shown in the app on phone. If the sync gets stuck at 100% then try restarting the phone, then try again and if it doesn't work restart the watch too.
Steps will sync alright ,but dont expect to sync heartrate .
Amazfit will display heart rate only when Pace' s heartrate is set to continuous mode.
Howevrer as soon as continuous mode is diabled , Amazfit will lose all heartrate data .
This means that the problem is not with connection,but with Amazfit syncing heartrate to Amazfit account .
This app is so bad and buggy .
I have no issues here syncing data. Try unpairing the watch while it is connect to phone, so it will factory reset (all data will be erased), then do NOT restore old data to watch when you pair again. For better results, also uninstall Amazfit Watch app before pairing again, and login using the same account to restore your old data (to phone only).
lfom said:
I have no issues here syncing data. Try unpairing the watch while it is connect to phone, so it will factory reset (all data will be erased), then do NOT restore old data to watch when you pair again. For better results, also uninstall Amazfit Watch app before pairing again, and login using the same account to restore your old data (to phone only).
Click to expand...
Click to collapse
I have tried this method numerous times already.
As i said, everything synced alright with the exception of heartrate.
Heartrate data doesn't get retrained when continuous heartrate on watch is disabled.
I have tested here, and it works on both Android and iOS: as soon as I disable continuous HR it will show previous manual HR data.
lfom said:
I have tested here, and it works on both Android and iOS: as soon as I disable continuous HR it will show previous manual HR data.
Click to expand...
Click to collapse
It's supposed to show previous continuous HR data as well after HR being disabled, similar to the MI-Fit App.
That's how you would know your HR performance for the duration that it was continuously measured.
HR measurement, if working properly, should retain those data, as in STEPS and SLEEP data, so you can refer to how your heart rate does for periods that have been recorded.
P.S. the Exercise sessions recorded and retained continuous heart rate data without any problem. One can always check back at the continuous heart rate chart when the exercise session was recorded.
Related
I'm so disappointed! Two days in a row I've been climbing the mountains and used the 'Climb' activity to track my workouts. Both days I was unable to Stop and Save the activity. When I pressed the 'Save' button there was an endless animation on the screen 'Saving your activity'. I left it for over an hour this way but nothing changed and I restarted the watch. Unfortunately the workout has not been saved. The same thing happened on the next day.
Both workouts have been with duration of more than 7 hours and contained so precious GPS data for me which now I cannot access.
Does anybody know why this happened and how to avoid it next time?
My watch has the latest official ROM.
While I can't tell you how to avoid it, try https://forum.xda-developers.com/smartwatch/amazfit/xiaomi-huami-amazfit-export-data-t3533292/page19
the version vor the stratos.
You might be able to get the Data manually.
Upgrading to WOS2 (firmware 2.x.y) may cause corrupted data. You can fix it this way (all data on watch will be erase, but you will get it back to phone):
1. Unpair watch while it's connected to phone, so all data will be erased;
2. Logout from Amazfit app, close it (it's better to re-install using the latest version or go to phone settings and "clear data");
3. Open Amazfit and login using the same account, your old data should be restored;
4. Pair watch again but do not restore old data when Amazfit asks if you want to.
I've also had this issue with Pace - on latest firmware. It only seem to happen on really long (over 5 hours) activities. I lost my Ironman cycle because of this issue.
lfom said:
Upgrading to WOS2 (firmware 2.x.y) may cause corrupted data. You can fix it this way (all data on watch will be erase, but you will get it back to phone):
1. Unpair watch while it's connected to phone, so all data will be erased;
2. Logout from Amazfit app, close it (it's better to re-install using the latest version or go to phone settings and "clear data");
3. Open Amazfit and login using the same account, your old data should be restored;
4. Pair watch again but do not restore old data when Amazfit asks if you want to.
Click to expand...
Click to collapse
I have done what you suggested. Let's hope it will fix the issue. Thanks!
Hello, I can't find the activity (skiing) in Amazfit pace after I stopped it and saved. is it possible to restore it manually? cause in App also no info after the sync.
Hello,
Two days ago, I completed a bicycle ride of 43.37 km, while recording the activity with my Amazfit Stratos. Today, I connected to the Amazfit Watch app in my phone to sync my activities (Normally, I have my Stratos in Airplane mode in order to save battery and connect to my phone once every two or three days). To my surprise, this one (made on 2018-08-27) was not shown in my activities page in the Amazfit Watch app. I have to note, that another short ride that I made the day after (on 2018-08-28) of 10.09 km is shown in the app. Also, this discrepancy appears on the total mileage (in the app) versus the sports history (on the watch) readings (the former shows 662, 85 km, while the latter shows 706,07 km). Of course, the 43.37 km ride is shown on my Stratos.
I tried a few things to bring this activity to the cloud, like closing and reopening the Amazfit Watch app, rebooting the watch, but nothing helped.
I must also note that, while connecting today, the watch updated to the latest version. I don't know if that had an effect on syncing.
Does anyone have any suspicion on why is this happening and how can I correct this?
I have also submitted a question to Amazfit support page and I am waiting for their response.
Thank you,
Evangelos
Hi,
I have the same issue. The activity and sleep info are not displayed in Amazfit Stratos since I have updated the device the last weekend.
Do you have received any answer from Amazfit support?.
Thanks.
iscario said:
Hi,
I have the same issue. The activity and sleep info are not displayed in Amazfit Stratos since I have updated the device the last weekend.
Do you have received any answer from Amazfit support?.
Thanks.
Click to expand...
Click to collapse
I received the following reply from Amazfit support:
"Please go to your phone Bluetooth settings to cache Bluetooth cache, toggle Bluetooth OFF and ON, reboot the watch and phone, log out and then re-open app and try connecting again.
If your issue persists, please connect wifi on the watch and go to more settings---upload. Tap upload on the watch to upload data to Amazfit Watch app and open your app to sync. Then unpair the device from your phone and re-pair it to have a try."
I tried the first method, but it didn't work. Then, I proceeded to the second method of manual uploading data, which remedied the problem. I suspect that it is not necessary to unpair and re-pair the watch - I think that a log-out and log-in will do the job. If you follow this technique, after uploading data, try to log-out and log-in again and check your activity in the app to see if everything is back. If not, then go for a unpair-re-pair process.
Hope this helped.
keneva said:
I received the following reply from Amazfit support:
"Please go to your phone Bluetooth settings to cache Bluetooth cache, toggle Bluetooth OFF and ON, reboot the watch and phone, log out and then re-open app and try connecting again.
If your issue persists, please connect wifi on the watch and go to more settings---upload. Tap upload on the watch to upload data to Amazfit Watch app and open your app to sync. Then unpair the device from your phone and re-pair it to have a try."
I tried the first method, but it didn't work. Then, I proceeded to the second method of manual uploading data, which remedied the problem. I suspect that it is not necessary to unpair and re-pair the watch - I think that a log-out and log-in will do the job. If you follow this technique, after uploading data, try to log-out and log-in again and check your activity in the app to see if everything is back. If not, then go for a unpair-re-pair process.
Hope this helped.
Click to expand...
Click to collapse
Solved after uninstalling Amazfit app 2 times and clean cache.
Thank you very much for your help.
Hi All.
I recently got an Amazfit Stratos and I am having a horrible time trying to gps track my outdoor cycle.
I have tried twice, and both times, the GPS just either:
*Intermittently records data
or
*stops recording gps data altogether.
Basic questions?
Urban areas and Woods... same issue
Urban areas are residential.. no high tall building
Weather was good on both occasions
Yes I am waiting for GPS lock
Heart rate and time measurement continue flawlessly (shows data for the entire ride). It's just GPS tracking that is totally weird.
P.S. It's not "drifting" or inaccurate.. it seems to only switch on the gps sporadically... recording "every now and then"...
No errors or issues reported during the activity.
Latest Firmware (Although last nights a new firmware popped up, haven't tried the activity with last night's firmware.)
Both previous activities was on latest firmware at the time. (Yesterday and the day before)
And the REAL issue for me really, is that my wife's Pace records perfectly on the exact same routes where my Stratos just can't get anything usable going...
I have logged "feedback" request with logs using the app, but have not had any response other than, thanks.. we may use your feedback in the future...
From my own conclusions, the gps works.. because when it tracks... the location where it tracks is accurate.. it just doesn't track constantly. See my attached screenshot of my last ride. (Where my wife and her Amazfit pace tracked perfectly)
Any Ideas?
Cant add the image due to post count... How do I add it to this post?
Have you tried factory reset of the watch? Procedure is to unpair it from the app, it will reset itself, start fresh clean and ask for a pairing.
After pairing it will load last 7 days of your work, while all other old data will remain in the app, on your Mi account cloud. What you will have to add separately are only the 3rd party watchfaces, if you have installed them before.
Strongly suggest you try this first, it takes 5 minutes of your time, and you will lose no data.
image
https://ibb.co/rcJXcyx
Thanks Nidza. I will surely try this. I have not yet as the watch is brand new. Upon receiving it It upgraded firmware 3 times from out of the box, and then I started using it.
I will give it a try, surely cant hurt.
Well what do you know. That factory reset seems to have done the trick!
Thanks!
Some points worth noting:
from the factory settings, a few watch settings did not pull through from the sync back to the app after factory reset.
Time format: My previous time format was 24h (Doubt that makes a difference)
Auto Sync: After factory reset, auto sync is off (I had it "on" before). Can't say if this actually causes any bugs to pop up? Maybe the watch tried to sync which interfered with gps functions? I used it yesterday with auto sync off and it worked well. I will investigate if auto sync on causes the GPS issue again.
Thanks again.
Hi guys, is it normal, that my Stratos's Gps show me the speed to much delayed. I checked it with my car, and the gps gets to the same speed as my phone's one, but maybe 10 seconds later. By skiing it can mean worse maximum speed measurement. It is like that with all the Amazefit Startos watches or I have a wrong one? Thanks for the answers!
It's not the same sampling frequency for a car as it is for a walking man. Watch gps do not need to detect non-human speeds, so there is a lower sampling. (Slower).
Same issue again FW version 4.2.8.0:
stops recording gps data altogether after a few minutes.
I've reset and unpaired the clock twice but the issue remains.
Any advice?
I am having a problem after updating 3.2.1.0, the HR is running on the clock and the sleep monitor also, I can see the data and graphics, but when synchronizing with the mobile, in the application AmazFit Watch, does not show the data of the continuous HR and does not also show sleep data. Searching the forum here I installed the stock rom again, I already did the factory reset, but that did not work either. Anyone have any idea what might be happening?
Restart both and do a forced sync (pull down from the top at the Amazfit main screen), or use the Upload / Sync feature directly from watch (it requires WiFi). If it doesn't work then probably you want to factory reset the watch and pair again. Be aware that it may take up to 24h for data to start syncing properly again after factory reaet.
lfom said:
Restart both and do a forced sync (pull down from the top at the Amazfit main screen), or use the Upload / Sync feature directly from watch (it requires WiFi). If it doesn't work then probably you want to factory reset the watch and pair again. Be aware that it may take up to 24h for data to start syncing properly again after factory reaet.
Click to expand...
Click to collapse
Thank you very much for the information, I did not know you need the 24 hours to start working properly. Now the morning began to work.
In the spring this year there were no problems at all. But now it's very unreliable.
Yesterday I pulled down the Zepp view a dozen times and finally it synced my last workout... but without GPS data! I know there was GPS data because I can see it on the watch itself.
Today I could not sync my last workout at all. Previously the Activities menu on the watch said there are a few items unsynced, but now it does not have this message. It's as if it was synced but I don't have data in Zepp.
When I pull down the Zepp view, sometimes it shows no errors, sometimes says "Device sync failed". But it shows battery level correctly and also it is able to ping the watch through Find watch function (the watch vibrates). Occasionally Zepp does the AGPS update of the watch, and the update also sometimes takes multiple tries to complete.
What I have tried these days:
restarting Zepp
restarting Bluetooth and location of the phone
restarting Amazfit
restarting the phone
force-closing Zepp
cleaning Zepp cache
unpairing and repairing Amazfit (had to repeat pairing twice - it failed during the last step when preparing the device)
Watch
Amazfit GTS
Firmware version v0.1.2.05
Phone
Nokia 8.1 Android 11
Zepp
7.0.2-play
Now after having written this, I restarted Zepp once more, and suddenly it synced automatically, loaded the stuck workout with all the GPS data and also did AGPS update. But when I do pull down, it again says "Device sync failed".
Why it's so unstable now? Is the watch dying? Is Zepp glitching? Is it some Android update at fault?
I'm having the same issue. Did you ever find a solution?
Exactly the same issue. Same steps were tried also. Have reported this issue through app. No response. Atleast, it is not me alone. Thanks for sharing this issue.
Hi everyone. I found a solution.
Removed all the cache data and also app data in Android app settings for Zepp.
Then uninstalled Zepp completely.
Then reinstalled Zepp from Google Play.
Then reset Amazfit to factory settings.
Then paired Amazfit to Zepp.
Now it seems to be working again without a hitch for two months.
I suspect, the local database was somehow out-of-sync beyond repair and that's what was messing Zepp and it failed when saving data. So, most likely cleaning all the app data was the main thing, and maybe it would work just fine without reinstalling. At first, I was reluctant to clean the app data because I was afraid I would lose all of my workout history, but fortunately, the app was able to reload it from the server. Of course, I lost all the workout data that was on Amazfit itself.