Code:
**Disclaimer**
This thread is [B]not[/B] created or maintained by the Switchroot team.
If you have any questions or concerns please ask them in their offical thread!
I decided to create a thread dedicated to user-submitted bug reports, since the main DevDB thread seems to be constantly flooded with replies and discussions (bug reports tend to get buried rather quickly).
This is intended to make these issues easier to see for the Switchroot team, instead of them having to read through countless pages and compile a list themselves. Please only report bugs in this thread!
Click to expand...
Click to collapse
Known Bugs
Deep Sleep is currently broken
Auto Rotation is currently broken
In docked mode, the screen on the Switch itself will remain on
Android does not detect charging, but the console still charges
Some applications do not handle Joy-Con inputs correctly
The touchscreen will sometime detect inputs even when your finger is just floating over the screen
When booting into Android, you will receive an error stating 'System Not Responding' (just click 'Wait' and the problem should subside until the following boot)
Screenshots are currently broken
WiFi may stop working at random, if this happens just reboot
If your TV or monitor looks odd and grainy when in docked mode, trying un-docking and re-docking a few times
In docked mode, the TV keyboard will not work with a gamepad
SELinux is currently disabled
You can't access the FAT32 partition on the SD Card on macOS, Windows and Linux work as intended
Click to expand...
Click to collapse
User-Submitted Bugs
Third-party docks seem to be iffy with compatibility, but may work (give it a try!)
OpenGL rendering does not work in Dolphin Emulator
Joy-Con (A,X,B,Y,) inputs are swapped
While docked, audio does not output while using GeForce Now
Some apps have small black bars on the right side and bottom of the screen while running in Immersive (fullscreen) mode. Disabling the navigation bar and using a gesture-based navigation app such as Fluid Navigation Gestures seems to be a temporary workaround.
Lowering screen DPI below 600 causes the navigation buttons to glitch out whilst in Portrait mode
Adding on to the Known Bug regarding the touch screen, overall touch screen sensitivity seems to be overly-sensitive in both Android and TWRP
Some users report receiving a 'License Verification Failed" error upon opening Shield exclusive games, even with Shield-ifer installed
USB MTP does not currently function when plugged into PC
Some users report that while in docked mode and using an Ethernet adapter, certain applications may not recognize an internet connection
The network activity option in the status bar displays 0mbps up/down, regardless of network activity
Some users report that while in the Recents screen, application thumbnails are not appearing
All consoles seem to share the same MAC Address while running Android, instead of generating a unique one as intended
The analog sticks on the Joy-Cons report only being able to move in 8 directions, even after flashing the "fix-joycon.zip" in the official thread
Some users report that the time and date are reset back to defaults after shutting down or rebooting the system
The Nvidia Games app won't connect to the servers, even after flashing the "shield-ifier.zip" in the official thread (a workaround for this issue can be found here)
Click to expand...
Click to collapse
I have an Insignia Dock by Best Buy (which doesn't have any bricking reports) to use when traveling cause is much smaller. Although, it is not working on Android, while on Horizon it works just as a first-party dock. Did anyone have any luck with third-party docks? What would it needs to get it working?
My switch is really slow while running Android, probably the sdcard, but it's not slow on Ubuntu, same card. (16gb sandisk) It seems slightly better by decreasing the io read ahead to 128kb. Also download speeds on any network are about 5-15 kbps, no matter the network. Anybody else have this? I installed gapps, the nvidia app and magisk before first boot. Also flashed using win32 disk imager.
brvnonascimento said:
I have an Insignia Dock by Best Buy (which doesn't have any bricking reports) to use when traveling cause is much smaller. Although, it is not working on Android, while on Horizon it works just as a first-party dock. Did anyone have any luck with third-party docks? What would it needs to get it working?
Click to expand...
Click to collapse
I've seen others on the DevDB thread have similar issues with third-party docks, but I've yet to test with mine. Ubuntu seemed to not work on mine the last time I tested it however, if that says anything. I'll have to give it a go when I have time.
Moronig said:
My switch is really slow while running Android, probably the sdcard, but it's not slow on Ubuntu, same card. (16gb sandisk) It seems slightly better by decreasing the io read ahead to 128kb. Also download speeds on any network are about 5-15 kbps, no matter the network. Anybody else have this? I installed gapps, the nvidia app and magisk before first boot. Also flashed using win32 disk imager.
Click to expand...
Click to collapse
I can confirm this issue as well. I have a pretty speedy Samsung EVO Select U3 microSD, but system responsiveness seems rather lackluster until an app loads itself into memory. Not sure if this is the fault Android running off an SD Card or not.
A bit off topic, but another bug I noticed are that app screenshots on the Recents screen seem to be broken for me. If anyone could confirm this that'd be great.
Looks like screenshots don't work. It keeps saying no permission when I try to take a screen shot.
razers7t8 said:
Looks like screenshots don't work. It keeps saying no permission when I try to take a screen shot.
Click to expand...
Click to collapse
Can confirm this, but it's actually already a known bug according to the devs.
System ui force closed
sazuke0703 said:
System ui force closed
Click to expand...
Click to collapse
Is this on boot, or does it just happen at random? Because if it's the prior that's actually a known bug.
Mario119 said:
I've seen others on the DevDB thread have similar issues with third-party docks, but I've yet to test with mine. Ubuntu seemed to not work on mine the last time I tested it however, if that says anything. I'll have to give it a go when I have time.
I can confirm this issue as well. I have a pretty speedy Samsung EVO Select U3 microSD, but system responsiveness seems rather lackluster until an app loads itself into memory. Not sure if this is the fault Android running off an SD Card or not.
A bit off topic, but another bug I noticed are that app screenshots on the Recents screen seem to be broken for me. If anyone could confirm this that'd be great.
Click to expand...
Click to collapse
Have you changed your performance profile? That was a big improvement from me. I went all the way to 1700 though. I don't see much of a reason not to max her out.
A couple things:
- In my experience, the wifi random connection dropping issue only happens on 5GHz networks, 2.4GHz network will remain connected without interruptions.
- Some fullscreen apps (mostly games I've tried out, like Portal and Super Hexagon) have small-ish black bars on the right side and bottom of the screen while running in fullscreen mode, it seems this has something to do with the nav buttons but even using a setting that allows the nav bar to auto-hide will still cause these black bars to appear in fullscreen games.
- Lowering screen DPI below 600 in portrait orientation causes all of the nav buttons at the bottom of the screen to stop working properly (it seems below 600 dpi that they end up stacking all on top of one another in the middle where the home button should be), note that this issue does not happen in landscape orientation.
I think there are a few more reproducible bugs I've encountered but I don't remember them right now, will edit or post another reply if I think of/encounter any more.
Edit: another thing, but I'm not sure if this is actually a bug. Is it normal for a joy-con or pro controller connected via bluetooth to continue cycling through player indicator LEDs as if they were still searching for devices/in pairing mode? I haven't ever needed to connect my switch controllers/joycons to another device so I'm not sure if this is normal.
Edit 2: OpenGL rendering does not work in Dolphin for Android. Not sure if that's an actual 'bug' either.
A couple of things i came across
Joycons buttons are swapped when using moonlight/geforce now
Geforce now in docked mode audio stops working
themelstrand said:
- In my experience, the wifi random connection dropping issue only happens on 5GHz networks, 2.4GHz network will remain connected without interruptions.
Click to expand...
Click to collapse
I've yet to experience any WiFi drop-outs and I'm using a 5GHz network. Perhaps I've just been lucky?
themelstrand said:
- Some fullscreen apps (mostly games I've tried out, like Portal and Super Hexagon) have small-ish black bars on the right side and bottom of the screen while running in fullscreen mode, it seems this has something to do with the nav buttons but even using a setting that allows the nav bar to auto-hide will still cause these black bars to appear in fullscreen games.
Lowering screen DPI below 600 in portrait orientation causes all of the nav buttons at the bottom of the screen to stop working properly (it seems below 600 dpi that they end up stacking all on top of one another in the middle where the home button should be), note that this issue does not happen in landscape orientation.
Click to expand...
Click to collapse
I can confirm both of these issues.
themelstrand said:
Edit: another thing, but I'm not sure if this is actually a bug. Is it normal for a joy-con or pro controller connected via bluetooth to continue cycling through player indicator LEDs as if they were still searching for devices/in pairing mode? I haven't ever needed to connect my switch controllers/joycons to another device so I'm not sure if this is normal.
Click to expand...
Click to collapse
This is actually normal, it happens when you pair a Switch controller (be it Joy-Cons or Pro Controller) via Bluetooth to any OS besides Horizon.
themelstrand said:
OpenGL rendering does not work in Dolphin for Android. Not sure if that's an actual 'bug' either.
Click to expand...
Click to collapse
I've heard others report this issue, though I've yet to confirm it myself.
Phillyrider807 said:
Joycons buttons are swapped when using moonlight/geforce now
Geforce now in docked mode audio stops working
Click to expand...
Click to collapse
I haven't tried GeForce Now in docked mode, so I can't confirm that one myself (though I've heard user reports that line up with you). As for the Joy-Cons, they seem to be adopting Nintendo's layout rather than the more traditional Xbox layout. This seems to happen on every app, so it must be something with the drivers
Mario119 said:
I've yet to experience any WiFi drop-outs and I'm using a 5GHz network. Perhaps I've just been lucky?
Do you have a combination 2.4/5GHz network that supplies both frequencies over the same SSID, or does your router supply both frequencies as their own separate SSIDs/networks (i.e. "routername" and "routername-5G)?
Click to expand...
Click to collapse
themelstrand said:
Do you have a combination 2.4/5GHz network that supplies both frequencies over the same SSID, or does your router supply both frequencies as their own separate SSIDs/networks (i.e. "routername" and "routername-5G)?
Click to expand...
Click to collapse
The latter, the exact router I own is a NETGEAR C7000.
Mario119 said:
The latter, the exact router I own is a NETGEAR C7000.
Click to expand...
Click to collapse
Interesting, same type of router at my SO's place but have issues with the 5G network. Maybe it doesn't have to do with the network frequency then? Could very well be something else wrong with that router. No issue with my home network.
I have come across an issue with the touchscreen and mouse positioning while using Kodi. It appears as though the touch/mouse calibration is configured for a different resolution, so the points are progressively shorter as you go further from the upper left corner. A user posted a solution to this on the main thread for this, but this issue needs to be done with every boot. Not much of an issue for me, but it would be cool if this issue could be taken care of eventually. Here's the solution from that other user. https://forum.xda-developers.com/showpost.php?p=79977014&postcount=387
brvnonascimento said:
I have an Insignia Dock by Best Buy (which doesn't have any bricking reports) to use when traveling cause is much smaller. Although, it is not working on Android, while on Horizon it works just as a first-party dock. Did anyone have any luck with third-party docks? What would it needs to get it working?
Click to expand...
Click to collapse
Mario119 said:
I've seen others on the DevDB thread have similar issues with third-party docks, but I've yet to test with mine. Ubuntu seemed to not work on mine the last time I tested it however, if that says anything. I'll have to give it a go when I have time.
Click to expand...
Click to collapse
Hello,
I tried connecting this dock: https://www.amazon.de/gp/product/B07GQYTJ8G/ which works perfectly fine in Horizon and L4T Ubuntu.
Now on Android charging, ethernet connection and usb works but hdmi output on tv is just 480p with messed up screen ratio.
I have found this post in the rom thread which could help: https://forum.xda-developers.com/showpost.php?p=79977014&postcount=387
I couldn't test it yet.
Mario119 said:
Is this on boot, or does it just happen at random? Because if it's the prior that's actually a known bug.
Click to expand...
Click to collapse
It's random fc. And playstore stop working when install pubg mobile.
Bug:
Joycons Still not working as proper analog sticks (have flashed joycon fix zip). They work like digital sticks. You can test the movement with this app:
https://play.google.com/store/apps/details?id=ru.elron.gamepadtester&hl=en_US
xxcrashxx said:
I have come across an issue with the touchscreen and mouse positioning while using Kodi. It appears as though the touch/mouse calibration is configured for a different resolution, so the points are progressively shorter as you go further from the upper left corner. A user posted a solution to this on the main thread for this, but this issue needs to be done with every boot. Not much of an issue for me, but it would be cool if this issue could be taken care of eventually. Here's the solution from that other user. https://forum.xda-developers.com/showpost.php?p=79977014&postcount=387
Click to expand...
Click to collapse
I personally haven't tried Kodi yet, but I've added this to the thread because it seems like a known bug as per user reports.
trohn_javolta said:
Hello,
I tried connecting this dock: https://www.amazon.de/gp/product/B07GQYTJ8G/ which works perfectly fine in Horizon and L4T Ubuntu.
Now on Android charging, ethernet connection and usb works but hdmi output on tv is just 480p with messed up screen ratio.
I have found this post in the rom thread which could help: https://forum.xda-developers.com/showpost.php?p=79977014&postcount=387
I couldn't test it yet.
Click to expand...
Click to collapse
I actually got around to trying my third-party dock (which I believe to be this one) and it doesn't work. The official dock works fine however. I guess it's just hit and miss with third-party docks.
sazuke0703 said:
It's random fc. And playstore stop working when install pubg mobile.
Click to expand...
Click to collapse
Interesting, I haven't had many FCs on my unit. Is anyone else experiencing this issue?
Related
Hope I'm not duplicating anything, but there seems to be a lot of BT related questions and none answered in one unified place. Also I think the BT Dev thread should be left to the devs (to keep it easier for them to work on things, rather than help us mere mortals ).
This applies to CM7 (latest nightlies, Tablet Tweak RCs) ONLY (as far as I know).
So, if bluetooth does not turn on, there a few things that you can try.
Do a HARD reset (that is, hold down the power button until the NookColor turns off, then start it back up.
Fix Permissions in ClockworkRecovery:
Boot into CWR (w/SD, load it in. With CWR installed on eMMC, go to ROM Manager > Reboot into Recovery. Alternatively, hold down the power plus "N" button for ~8 seconds (from a shutdown NookColor).
Try both!
An interesting thing to note is some users (myself included) can only start up bluetooth within a pretty short window of time after the NC has booted up. Not sure why timing is important, but could be a factor for those who cannot start up BT after some given time of operation.
I found this tip that may work after a fresh (read: wipe system/data) install, but may also work after flashing a nightly over a nightly.
If you're ready to turn on Bluetooth, there's a trick. If you don't do this, Bluetooth will just refuse to turn on / be enabled.
Turn off wifi (Settings > Wireless & Networks > Wi-Fi)
Reboot
Turn on Bluetooth (Settings > Wireless & Networks > Bluetooth)
Turn on wifi
It seems a bit odd, but that's what you have to do. From then on out it'll work fine.
Click to expand...
Click to collapse
Credit here (step 2)
For a list and description of devices that work with the NC, check this out:
Known functional Bluetooth devices
For tethering data via BT, try android-wifi-tether. While it can be used to create an access point on your phone via wifi, you can also opt to use BT to create the tether. This works well in conjunction with TetherGPS which I use to provide GPS info to the NC from my G1 while using CoPilot Live to show navigation (I don't have data on the G1).
If you have the BT enable problem try this kernel and let me know if it changes anything:
http://forum.xda-developers.com/showpost.php?p=12683824&postcount=1754
dalingrin said:
If you have the BT enable problem try this kernel and let me know if it changes anything:
http://forum.xda-developers.com/showpost.php?p=12683824&postcount=1754
Click to expand...
Click to collapse
Tried that previously and it did not work for me.
In other words, it works as with all the kernels I've tried (your OC'd and stock kernel): it will start up if I start is quickly, but otherwise not.
ace7196 said:
Tried that previously and it did not work for me.
In other words, it works as with all the kernels I've tried (your OC'd and stock kernel): it will start up if I start is quickly, but otherwise not.
Click to expand...
Click to collapse
me too. I went back to 4/4 since them. If I leave BT on all the time, it is on when I boot, but if I turn off BT and reboot, it won't come on without a hardboot (holding down power.)
Fix permissions is NOT needed, just a hard boot.
dalingrin said:
If you have the BT enable problem try this kernel and let me know if it changes anything:
http://forum.xda-developers.com/showpost.php?p=12683824&postcount=1754
Click to expand...
Click to collapse
For the last few days Ive been trying to get BT working w/ my car stereo, using phiremod 5.3
I have no problems enabling Bluetooth (first time I had to reboot a few times and fix permissions)
With it flat against the stereo, I'm 'paired but not connected' and getting it to actually connect usually takes 4 - 5 tries.
After its connected- when I try to play any kind of music, it gets stuck every few seconds- and stays stuck for more than a few seconds (like 10) and plays again.
I just downloaded this kernel, (wiped caches, fixed permissions again) and it connected on the second time, and only got 'stuck' once for maybe 2 seconds, and played the rest of the song with no problems.
Seems like it changed something on my end...
Just figured I'd mentioned it.
(I can go back to the other kernel, or a different version of cm7, and see if I get the same connecting/ stuttering problem, if you thing it would help)
Btw- thanks so much for sharing all of your hard work!
breebauer said:
After its connected- when I try to play any kind of music, it gets stuck every few seconds- and stays stuck for more than a few seconds (like 10) and plays again.
I just downloaded this kernel, (wiped caches, fixed permissions again) and it connected on the second time, and only got 'stuck' once for maybe 2 seconds, and played the rest of the song with no problems.!
Click to expand...
Click to collapse
I dont' know if anyone who's building from source wants to take a look at this patch committed 3 days ago on the omapzoom tree to frameworks/base, but it seems to address a bluetooth corruption problem.
Can anyone who's using the copilot app tell me exactly how to get it set up? I can get the GPS signal to the nook but then I get an error about an invalid imei number.
Sent from my NookColor using Tapatalk
Calla969 said:
Can anyone who's using the copilot app tell me exactly how to get it set up? I can get the GPS signal to the nook but then I get an error about an invalid imei number.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Check out this posting:
http://forum.xda-developers.com/showthread.php?t=1024963
I believe you also need the Bluetooth GPS Provider app from the market.
Calla969 said:
Can anyone who's using the copilot app tell me exactly how to get it set up? I can get the GPS signal to the nook but then I get an error about an invalid imei number.
Sent from my NookColor using Tapatalk
Click to expand...
Click to collapse
Never had an issue with the IMEI number, but here's how I got it setup.
Start with the TetherGPS app running server on the phone and client on the NC, as well as tether-wifi from google running on the phone, then connect to the AP on the NC
Next, open/install the app. It should read the GPS data from the phone
Now, switch back to a wireless connection with internet access, download the voice, then enter the serial/etc...
Finally, load the app back up after all the registration stuff 'n things, and use the "internet" connection from the phone to grab the GPS info.
Copied and edited from cm7 user thread.
I have xoom bluetooth keyboard with disconnect issues. Would the special kernel help with this?
From the accessories thread. "I found a work-around. Download the app Bluetooth Keyboard JP, change the settings in settings > Language and Keyboard to that app, then connect the keyboard." Anybody else try this or others? Blue Input is another one. I know of one more but can remember its name.
I'm running Phiremod v5.3 cm7 from emmc and cm7 nightlies from sd card. I usually have a data sd card but can switch it out. I have updated the cm7 sd card before. Not sure which nightly and OC I used last. Could use ClockWorksMod to flash this kernel to Phiremod v5.3. Could replace the kernel, uImage, on the SD card. Usually there are different kernels for emmc and sd card.
Another issue: When I have the keyboard active and playing flash files from the internet, it seems to buffer more. If I move the keyboard out of range or use settings to disconnect the keyboard, the buffering is less and the flash files play better. I have cyfi bluetooth external speakers. When I use them I get the same buffering issue, so I just use an external player through the headphone jack instead.
ace7196 said:
Never had an issue with the IMEI number, but here's how I got it setup.
Start with the TetherGPS app running server on the phone and client on the NC, as well as tether-wifi from google running on the phone, then connect to the AP on the NC
Next, open/install the app. It should read the GPS data from the phone
Now, switch back to a wireless connection with internet access, download the voice, then enter the serial/etc...
Finally, load the app back up after all the registration stuff 'n things, and use the "internet" connection from the phone to grab the GPS info.
Click to expand...
Click to collapse
Question: will 'Wireless Tethering' work in place of 'tether-wifi'? Or does it -have- to be 'tether-wifi'? Thanks!
any software will work that tethers.:-D
ace7196 said:
Never had an issue with the IMEI number, but here's how I got it setup.
Start with the TetherGPS app running server on the phone and client on the NC, as well as tether-wifi from google running on the phone, then connect to the AP on the NC
Next, open/install the app. It should read the GPS data from the phone
Now, switch back to a wireless connection with internet access, download the voice, then enter the serial/etc...
Finally, load the app back up after all the registration stuff 'n things, and use the "internet" connection from the phone to grab the GPS info.
Click to expand...
Click to collapse
Apparently the latest version of Copilot has introduced this error. I have spoken with tech support regarding the issue and they told me that they are aware of the problem and will release an update early next week that will fix the problem. Apparently if you have version 8.2.504 it works, but the new version breaks it. The dev won't send me a copy of the old version, so I guess I'll just have to wait and hope.
lschroeder said:
Copied and edited from cm7 user thread.
I have xoom bluetooth keyboard with disconnect issues. Would the special kernel help with this?
From the accessories thread. "I found a work-around. Download the app Bluetooth Keyboard JP, change the settings in settings > Language and Keyboard to that app, then connect the keyboard." Anybody else try this or others? Blue Input is another one. I know of one more but can remember its name.
Another issue: When I have the keyboard active and playing flash files from the internet, it seems to buffer more. If I move the keyboard out of range or use settings to disconnect the keyboard, the buffering is less and the flash files play better. I have cyfi bluetooth external speakers. When I use them I get the same buffering issue, so I just use an external player through the headphone jack instead.
Click to expand...
Click to collapse
I don't know if that is a solution, but the problem appears to be a conflict between wifi and bluetooth. Turn off wifi and most of your keyboard problems will go away.
Also there is an app on the market called "Null Keyboard" Which simply turns on a keyboard device that disables everything keyboard related. It doesn't disable bluetooth input, but it gets rid of the long-press pop ups and is suppose to solve other issues as well (including the software keyboard popping up every time you want to type.)
I haven't had time to install it, but it's purchased.
Does anyone know where (on the Nook) the BT chip/antenna is located?
It might help to know, since the range is so limited...
breebauer said:
Does anyone know where (on the Nook) the BT chip/antenna is located?
It might help to know, since the range is so limited...
Click to expand...
Click to collapse
http://www.zdnet.com/photos/nookcolor-teardown/487636?seq=62&tag=content;photo-frame#photo-frame
So across the bottom and up the right side as you hold it portrait.
khaytsus said:
http://www.zdnet.com/photos/nookcolor-teardown/487636?seq=62&tag=content;photo-frame#photo-frame
So across the bottom and up the right side as you hold it portrait.
Click to expand...
Click to collapse
Thanks! That makes a big difference...
(For some reason, I was thinking it was on the upper left corner- not sure why)
chisleu said:
I don't know if that is a solution, but the problem appears to be a conflict between wifi and bluetooth. Turn off wifi and most of your keyboard problems will go away.
Also there is an app on the market called "Null Keyboard" Which simply turns on a keyboard device that disables everything keyboard related. It doesn't disable bluetooth input, but it gets rid of the long-press pop ups and is suppose to solve other issues as well (including the software keyboard popping up every time you want to type.)
I haven't had time to install it, but it's purchased.
Click to expand...
Click to collapse
I was just using google voice to text from several feet back. In fact it was hard to read the small print from that distance. I did not realized that keyboards have a larger range then headsets.
Testing Bluetooth Keyboard JP now. Force closes, so just switched to swift keyboard I downloaded from amazon app store for free. To get out swift keyboard and get a null keyboard, I hit the back key on the xoom keyboard, then the virtual swift keyboard no longer shows up.
@chisleu do you have a link or instruction to modify bluetooth keyboards so that keys can have their mappings corrected. Xoom has some correct and some wrong or disabled under CM7.
Couldn't get BT to work at all however powering down while the wifi is off, and turning the bluetooth on before the wifi made it works on the first try. Was streaming Slacker to my stereo in a matter of minutes. Wifi doesn't seem to interfere with the BT audio stream at all, audio sounded crisp and perfect. Range however was still limited to a foot or so.
Hoping there is a possible hardware mod that can hook up an antenna to the BT chip. I'd be in heaven if I had full BT functionality on this beast.
FYI, Although I don't have any RF experience I'm still an electrical engineer so if anyone can toss me a bone on the PCB layout or pinouts of the nook I might be able to try stuff to boost the range.
What is the feasibility of adding dial-up networking client support to CM7? Some folks are able to tether their NC to their phone using an ad hoc wifi network, and others have had success via a Bluetooth personal area network (PAN) using the "pand" utility. Unfortunately, I have a Blackberry phone, and it does not support the PAN profile. It does, however, support dial-up networking (DUN) over Bluetooth (confirmed with a Windows laptop).
According to https://sites.google.com/a/android.com/opensource/projects/bluetooth-faq, "dund" is the client utility that is needed to establish a dial-up connection from Android to another device. When I run this command on the NC, it says "dund: not found". I'm not a developer and don't know how much effort would be involved in adding this functionality to the build. Is it just a matter of including the binaries, or is there additional development work involved?
Thanks in advance..
I've been playing around with cm7 since release, internal build so I haven't run into the brick problem, but I have noticed a couple issues that I never had with a plain 1.4.0 rooted nook tablet.
First, I am losing wifi connectivity when I let the tablet sleep for more than a few minutes. Wifi will remain on, but just scans indefinitely while finding no networks. Sometimes I have to toggle wifi off and on several times before it starts working again. I have never had it lose connectivity while it was active and doing something, only when I set it down for several minutes and then wake it up.
Secondly the youtube app has locked up my tablet requiring a reboot several times. Sometimes this happens on the first video played, sometimes I can get up to 4 or 5 before the screen just goes black and all input is ignored. I would have left this info on the alpha release thread, but I can't post there yet and wanted to pass this info along. I'm having a great time fooling around with it, and so far these are the only issues I've noticed.
I haven't had the wi-fi isses that I've noticed. Only things I've ran into are those already being discussed in the dev forum - the near-brick experience and larger apps not installing.
In spite of almost bricking, I've still been using the alpha over the last couple days and am definitely loving the freedom and speed over stock. Can't wait to see how awesome it becomes with further development.
The wifi issue can be fixed by adjusting the settings. You just need to turn off wifi sleep. I think this is a long time cm7 bug and not unique to this build. I have reverted to stock for now so I can't guide you through it, but I am pretty sure it's an easy adjustment. (I couldn't go without hulu while in the middle of watching a series.)
StridAst said:
The wifi issue can be fixed by adjusting the settings. You just need to turn off wifi sleep. I think this is a long time cm7 bug and not unique to this build. I have reverted to stock for now so I can't guide you through it, but I am pretty sure it's an easy adjustment. (I couldn't go without hulu while in the middle of watching a series.)
Click to expand...
Click to collapse
Yep, you just go to Settings -> Wireless & Networks -> WiFi Settings then press the menu button. This brings up a small menu bar with two options. Tap "Advanced" and you can change your wifi sleep policy there.
imsoenthused said:
I've been playing around with cm7 since release, internal build so I haven't run into the brick problem
Click to expand...
Click to collapse
I believe the brick issue is in both the internal and SD release. Be sure to stay away from that SD card format button.
RadicalAns said:
I believe the brick issue is in both the internal and SD release. Be sure to stay away from that SD card format button.
Click to expand...
Click to collapse
Yeah, I'm not sure where the misconception that it's the SD-Card version causing the problem, unless it's just confusion because the problem was cause by an SDCard Format....I think the issue occurs in either, and I know for sure the internal is succeptible to it, because mine is internal and I was an early-bricker.
Ok, my fault for not being clear I guess. I have no conceivable reason to format an sd-card from within the cm7 alpha release so I have continued using it. Turning wifi to always on seems to have fixed my wifi issues, with a negative impact on battery life.
Youtube is still crashing my NT with regularity but that probably has something to do with the generally bad video performance.
imsoenthused said:
Ok, my fault for not being clear I guess. I have no conceivable reason to format an sd-card from within the cm7 alpha release so I have continued using it. Turning wifi to always on seems to have fixed my wifi issues, with a negative impact on battery life.
Youtube is still crashing my NT with regularity but that probably has something to do with the generally bad video performance.
Click to expand...
Click to collapse
Yeah, Celtic and Gonce are working on fixing the video drivers. Right now they're a bit iffy.
-Unable to install some .apks and some apps from the market.
-Color is weird in some games (like blue instead of green)
-B&N Nook app not syncing or not working at all.
I have not used Netflix on it yet so I'm not sure of the quality for that or youtube. I have no need to wipe SD card so will continue to explore any bugs.
youtube
imsoenthused said:
I've been playing around with cm7 since release, internal build so I haven't run into the brick problem, but I have noticed a couple issues that I never had with a plain 1.4.0 rooted nook tablet.
First, I am losing wifi connectivity when I let the tablet sleep for more than a few minutes. Wifi will remain on, but just scans indefinitely while finding no networks. Sometimes I have to toggle wifi off and on several times before it starts working again. I have never had it lose connectivity while it was active and doing something, only when I set it down for several minutes and then wake it up.
Secondly the youtube app has locked up my tablet requiring a reboot several times. Sometimes this happens on the first video played, sometimes I can get up to 4 or 5 before the screen just goes black and all input is ignored. I would have left this info on the alpha release thread, but I can't post there yet and wanted to pass this info along. I'm having a great time fooling around with it, and so far these are the only issues I've noticed.
Click to expand...
Click to collapse
I had problems with youtube too ... dolphin browser HD crashed when I clicked on a youtube link . Similar wi-fi problem too . Also the Wi-Fi indicator icon in status bar shows 1 or 2 bars after 10 min of active connection ....
Pretty stable otherwise . btw anyone tried 1080p mp4 videos in HW mode ???
Can someone please send me the internal build zip please
Sent from my BNTV250 using xda premium
CM7 beta bug report
Hello, I can't post to the development forum yet, but I thought the devs working on the next CM7 release for the NT should know about a potential bug. Also, I've only began using an android device about a month ago, so please forgive any noobish remarks. If after reading this, someone thinks it's important for the upcoming CM7 build release, please let someone on the development team know. Thanks.
I've been using an internal install of the beta build since it was released yesterday morning.
Everything has been working, very well, and I haven't been attempting to format sd cards from the device.
I've had one crash of ADW launcher when trying to add a playlist through the music player widget. I had a minor wifi hiccup that required toggling the wifi on and off to resolve. And a crash of the notification bar, when I attempted to click on an email notification message, which resolved by itself, seconds later.
The bug I'm most concerned about happened just about an hour ago. I noticed the battery getting low, so i plugged it in, powered on. It started charging, so i left it alone, a little while later, I looked at it, and the "n" on the charger had changed from orange to green, indicating a full charge. I awoke the nook from sleep to find that it was no longer charging, but that the battery was only about half charged. I unplugged it, and plugged it back in, but the status light was orange for only a second, before changing back to green, and no more charging.
I powered it off, and plugged it it (which of course made it turn back on /facepalm), but then powered it down through the power console as soon as CM7 booted. I has been powered off, and as far as i can tell charging normally, as indicated by the orange status of the charger's indicator. I intend to leave it powered off, and charging, until such time as the charging indicator turns green.
There may be some information here that is valuable to the Developers and you have attempted to articulate everything well.
However, is there some reason you chose to create a new thread instead of posting your issue In This One?
Perhaps the moderators can combine these threads but I'm sure the developers are more apt to look in one thread then trying to chase down multiple ones.
Good luck with your issues.
Aw crud. Totally didn't see that thread. If a mod could please combine, it would be appreciated.
Maybe the bug thread should be stickied?
Sent from my SAMSUNG-SGH-I997 using Tapatalk
daedricgeek said:
I had problems with youtube too ... dolphin browser HD crashed when I clicked on a youtube link . Similar wi-fi problem too . Also the Wi-Fi indicator icon in status bar shows 1 or 2 bars after 10 min of active connection ....
Pretty stable otherwise . btw anyone tried 1080p mp4 videos in HW mode ???
Click to expand...
Click to collapse
I've been having crashing/force closes trying to stream video from sites like youtube.....but with a more mature content....if you know what I mean.
If I'm being too obscure....basically I can't stream porn onto it. Which, imo, is a device-killing bug!
(not really)
On the plus side, it seems like it charges pretty well through a USB connection now, where, if I'm not mistaken, it would not do so on stock. Although I only had stock for like 3 hours before zerging it, so I can't compare it very well....
I was also sitting up waiting on the release of this and have been running it every since then. the only real bugs I have seen is the unable to install alot of apps from the market as it gives the cant write to sdcard which is documented in the dev forums. my wireless does not seem to drain my battery much at all but the device itself never wanted to go into sleep mode unless I forced it into sleep. I changed the screen timeout and changed it right back and the issue resolved itself. Wireless does commonly go from full signal to 2 bars though but even when at 2 bars the connection seems fine and no loss of speed. as far as apps over 20 meg. the only ones I tried I had the apk file stored on my sd card and installed from there and they all installed just fine.
the device seems way more responsive now and I am absolutely loving it although i do miss the nook reader app itself and the one I downloaded from the market gives ab internal error : exception executing the command when I try and sign in Cant wait for the next release alpha or beta I would love to test it.
nocmadman said:
the device seems way more responsive now and I am absolutely loving it although i do miss the nook reader app itself and the one I downloaded from the market gives ab internal error : exception executing the command when I try and sign in Cant wait for the next release alpha or beta I would love to test it.
Click to expand...
Click to collapse
Go to the "Nook" folder on your sd card, then delete it. then try to sign in on the nook reader. This has worked for others who now have the nook app up and running on cm7
StridAst said:
Go to the "Nook" folder on your sd card, then delete it. then try to sign in on the nook reader. This has worked for others who now have the nook app up and running on cm7
Click to expand...
Click to collapse
Deleted nook folder tested same issue. Uninstalled the app and re installed it and now working thank you so much.
joecareytm said:
-Unable to install some .apks and some apps from the market.
-Color is weird in some games (like blue instead of green)
-B&N Nook app not syncing or not working at all.
I have not used Netflix on it yet so I'm not sure of the quality for that or youtube. I have no need to wipe SD card so will continue to explore any bugs.
Click to expand...
Click to collapse
Mostly I'm seeing the occasional app not installing. Every time it has been because "sdcard is not mounted". Even though it obviously it mounted. Aldiko reader is my current villain in this regard. No Wireless problems, but I changed the advanced settings right away. Interface is nice and fast.
Does anyone have any problems with installing games like need for speed
Sent from my PG86100 using xda premium
Reported/Confirmed Bug List for US Galaxy S3 Variants
This is going to be for the stock ROM and hopefully this will be a starting point for devs of this great device to start ironing them out in their custom ROMs. If you are not on a stock ROM, please do not post issues here unless it is a common issue throughout all ROMs you have tried. For example, WIFI disconnecting on any and all ROMs you have used. This is to weed out the actual issues/bugs from ROM issues/bugs.
I will try to keep the issues list up to date. If you see one not in the OP, please PM me!
If this has helped you, please click "Thanks"
Note: If you are having issues with connectivity via Bluetooth with car systems, please note that it is probably not a bug. While Bluetooth connectivity works on some cars, other cars might not be compatible. This is once again not a bug. It is just a lack of compatibility.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Rules:
-Do a search first.
-If you find the same issue, quote it and +1. Once an issue is confirmed by three different people, I will update it from Reported to Confirmed.
-Post your Carrier and Capacity type
---------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Confirmed Hardware Issues:
-Wifi disconnects and reconnects. Temporary Workaround: Disable one of the encryptions http://forum.xda-developers.com/showpost.php?p=27720169&postcount=12 Also http://forum.xda-developers.com/showpost.php?p=26987997&postcount=80 This will decrease the frequency but not eliminate.Thanks brett98765
Wifi Issue Discussion & Troubleshooting: http://forum.xda-developers.com/showthread.php?p=28303453#post28303453
-Phone overheating Possible Fix: http://forum.xda-developers.com/showthread.php?t=1790061
Confirmed Software Issues:
-You must clear data in Google Wallet before flashing any ROM or it will be forever broken! Launch Google Wallet Hit menu button> Settings> Reset Google Wallet. If you messed up, you will see a "Secure element not responding"
-When you open the phone app, Favorites is 2nd from the right. Once you select contacts, it is now on the far right. (UI Bug)
-Unable to set lockscreen wallpaper Temporary Workaround: Decrease image size.
-Battery drain from cell standby issue. Possible Fix http://forum.xda-developers.com/showthread.php?t=1790061
-Calendar time zones are incorrect and can appear at the wrong times. http://forum.xda-developers.com/showpost.php?p=29029536&postcount=280 Temporary Workaround: Remaking appointments via PC will fix it. (Thanks genepool & ikjadoon)
Confirmed Manufacturing Defects:
-Bluetooth Headsets / Car adapters cause popping sounds for audio. It was discovered to be bad phones.http://forum.xda-developers.com/showpost.php?p=28632833&postcount=222 (Thanks nerdstaz)
---------------------------------------------------------------------
Reported Unconfirmed Hardware Issues:
-GPS Issues. Some users reporting their phones not locking or reporting incorrect locations.
-LED settings do not work as intended. Third party LED configuration programs do not light up the correct LEDs and LED functionality seems limited. No clear description of LED colors.
Reported Unconfirmed Software Issues:
-GAPPS FCs when restoring call log and sms/mms via Mybackup Pro - Clear data for Google Framework.
-AT&T Visual Voicemail isn't working. Fix: AT&T Provisioning problem. Call AT&T's tech support to remove AT&T Message from the phone. It is incompatible Thanks malinois16
-Exchange notifications do not clear after viewing emails.
-Wifi turns on automatically - It is a setting. Not a bug. Disable Sprint Automatic Connection. For Verizon and other carriers, check your WIFI settings.
-Emails do not load properly or the background color is messed up. Fix: Go to Menu > Settings > Power Settings > Disable Background Color. Thanks ikjadoon
-While listening to music, the phone vibrates. Fix: Disable Auto-Haptic. It does not play well with audio apps. (Thanks Time_Zone)
Reported Unconfirmed Manufacturing Defects:
-Camera smudge
-Volume rocker / Power button wiggle around.
---------------------------------------------------------------------
Unknown Issues:
-Missing Tracking Numbers for 32GB Phones! (Only for West Coast)
-Missing phones (Only for Verizon =[)
-Missing money from bank accounts/credit cards.
*30*
I can't see my phone!! My money is gone; but I still can't see it!!
nicholaaaas said:
I can't see my phone!! My money is gone; but I still can't see it!!
Click to expand...
Click to collapse
OP Updated!
sekigah84 said:
Hey guys. Just to help the devs and other users out, if you discover an issue with your phone (WIFI for example) post the issue here.
This is going to be for the stock ROM and hopefully this will be a starting point for devs of this great device to start ironing them out in their custom ROMs.
I will try to keep the issues list up to date. If you see one not in the OP, please PM me!
Known Hardware Issues:
No information yet!
Known Software Issues:
No information yet!
Unknown Issues:
Missing Tracking Numbers for 32GB Phones!
Missing phones
Missing money from bank accounts/credit cards.
Click to expand...
Click to collapse
Love the "Unknown Issues" section!
sekigah84 said:
OP Updated!
Click to expand...
Click to collapse
nice!!
I've actually had a couple gapps FCs, restored only my call log and sms/mms via mybackup pro
I'm having WiFi problems with GS3, randomly disconnecting and reconnecting to access point...happens sometimes every 10 secs but i seen it go 5 mins with out disconnect.
brett98765 said:
I'm having WiFi problems with GS3, randomly disconnecting and reconnecting to access point...happens sometimes every 10 secs but i seen it go 5 mins with out disconnect.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1722160
Try to switch the encryption and see if that fixes it. If it does then this will be a confirmed issue.
I am here to learn.Thanks for sharing.
Ok it's been about 10 mins without a single drop...seems to have corrected the issue. I was using WPA-PSK [TKIP+AES] and I switched to just TKIP. I'll check back in a bit and let you know after about an hour or so. I'll try it using just AES then switch back to TKIP+AES and I will also try on 5gHz bandwidth.
Sent from my SPH-L710 using XDA
brett98765 said:
Ok it's been about 10 mins without a single drop...seems to have corrected the issue. I was using WPA-PSK [TKIP+AES] and I switched to just TKIP. I'll check back in a bit and let you know after about an hour or so. I'll try it using just AES then switch back to TKIP+AES and I will also try on 5gHz bandwidth.
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Glad to see that it worked. Let me know and I'll post it up as a workaround for the time being.
Ok so it seems that the only WiFi issue I'm experiencing stems from using duel encryptions. It works fine using WAP2-PSK [AES] alone. WPA-PSK [TKIP] works fine alone as well. I played around with the settings for a bit but I couldn't seem to get it to work properly on duel encryption.
Sent from my SPH-L710 using XDA
jdelano said:
I've actually had a couple gapps FCs, restored only my call log and sms/mms via mybackup pro
Click to expand...
Click to collapse
Are you restoring a backup from an HTC device or perhaps a backup from a Froyo device?
WIFI Disconnect/Reconnect Issue
Here's the issue I've been having. I'm in a very active wifi neighborhood. Even though I had the advanced wifi set to 'Always on' it kept disconnecting (and instantly reconnecting) to my network. The phone is scanning the neighborhood almost every 15 seconds. It's simply WPA-2 with just AES (and I'm not changing to TKIP)
This is a problem for me as I use "WiFI Unlock" to keep from having to enter my PIN when I'm at work/home and "Home Sweet Home" which uploads any photos I have taken to my server when it detects the home wifi network (and deletes them from my phone after 3 months).
Anyway, I was just on the chat with Samsung and in the end we did this,
1. disable the ATT WIFI auto login function (seems there's something similar on the Sprint phones that's a issue).
2. soft reboot the phone (turn off, pull battery, count to 30, boot up)
However this suggested solution doesn't work.
The wifi isn't staying connected though the breaks are very very temporary, but long enough for those apps to kick in.
Update additional things tried:
3. Turned off WiFi power save in the *#0011# service menu
4. Turned off Open WiFi notifications
5. Selected a single wifi band (5Ghz) where there is ONLY one network, mine
FWIW, I like that it connects to my 5Ghz wifi at 150 mbps, the speed is great.
Here's a video of the issue showing the phone:
http://youtu.be/FBo3NFdcMhs
Here's a videoe of the issue showing the router: http://youtu.be/rRALDc8LZOk
Yeah this is the same issue. I tried turning off sprint auto connection feature and also dialing *#0011# menu> WiFi> and disabling WiFi power save mode. But either of those had no effect after I had rebooted the phone. Maybe you should give it a try, it seems we have the same problem but with different encryptions.
Sent from my SPH-L710 using XDA
aznmode said:
Are you restoring a backup from an HTC device or perhaps a backup from a Froyo device?
Click to expand...
Click to collapse
Nope; OG Epic - was running GB 2.3.6 Thunderhawk 5.1
(I ran CM9 as well on it and always restored my logs and sms/mms)
brett98765 said:
Yeah this is the same issue. I tried turning off sprint auto connection feature and also dialing *#0011# menu> WiFi> and disabling WiFi power save mode. But either of those had no effect after I had rebooted the phone. Maybe you should give it a try, it seems we have the same problem but with different encryptions.
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
I had hope for a few minutes that this would work ( *#0011# ) but it's the constant rescanning for networks.... since so many wifi in my 'hood have the channels set to auto, they're constantly changing as they compete for space. This is why I wanted a phone with 5Gh- I even set it to only use the 5Ghz* but that doesn't do it either even though I can only see ONE network with 5Ghz, mine. this phone is constantly scanning and every few scans reconnecting.
turning off the AutoNotify of open wifi doesn't help either.
It's a plot to make you use more data on the carrier's network!
*which is bad for me, since I rely on wifi which is mostly 2.4Ghz when I'm out of the house (may need some NFC tags for the car or house doors.
brett98765 said:
Yeah this is the same issue. I tried turning off sprint auto connection feature and also dialing *#0011# menu> WiFi> and disabling WiFi power save mode. But either of those had no effect after I had rebooted the phone. Maybe you should give it a try, it seems we have the same problem but with different encryptions.
Sent from my SPH-L710 using XDA
Click to expand...
Click to collapse
Brett so you are still getting wifi issues and the dual encryption off just made it disconnect less?
Sent from my SPH-D710 using Tapatalk 2
WIFI Disconnect/Reconnect Issue - Level 3 report
FWIW. I just got off a 45 minute call with Samsung Help Support, went to level 3 support in Texas. This is newly documented, I've referenced this forum for additional reports of the dual encryption and the wifi connnect/reconnect issue I'm having. My ticket # 2113584507 (just for disconnect/reconnect) which you can mention at level 1 as having the same disconnect/connect issue. I specifically asked if I could post the ticket # so anyone could reference it at Level 1, but they will still take your own experience down.
Level 3 said they expect that they will be getting calls today since it's the first full day after the release. So if you want it fixed, CALL SAMSUNG, they're collecting bug reports.
sekigah84 said:
Brett so you are still getting wifi issues and the dual encryption off just made it disconnect less?
Sent from my SPH-D710 using Tapatalk 2
Click to expand...
Click to collapse
No none what so ever...after I changed the encryption yesterday I haven't had one drop in the last 14 hours.
Sent from my SPH-L710 using XDA
I upgraded my phone to KK back in late december and have been on it ever since but one problem has plagued me since then and I'm hoping to get some insight here. heres the problem...
When im connected to wifi (and this is only with wifi, not MD) I don't get my push notifications (gmail,fb,words,hangouts,etc) when the screen is off.Often i turn my screen on and get a barrage of notifications that i should have gotten hours ago. Ive tried all the sleep modes and Ive tried turning off wifi optimization.Nothing works and I know for fact it did not do this on JB.
I DO get text messages and phone calls instantly though but nothing else will wake my phone up. While i do enjoy the deep sleep, i would like to get my notifications in a reasonable amount of time without having to turn the phone on to check them.
Has anyone else had this "problem"?
Nope. Have you looked into what is and isn't checked in your Google Settings? There's a Play Games tab that allows you to mute certain games, essentially stopping their notifications. I don't suppose you've messed with that, have you?
It's strange, I've not really heard of this, especially since you're getting texts and such.
SteveMurphy said:
Nope. Have you looked into what is and isn't checked in your Google Settings? There's a Play Games tab that allows you to mute certain games, essentially stopping their notifications. I don't suppose you've messed with that, have you?
It's strange, I've not really heard of this, especially since you're getting texts and such.
Click to expand...
Click to collapse
Yeah i know and I've googled it to death for a few months now. I'll check g settings but idk why that would stop gmail. It's like when I'm on Wi-Fi w/ the screen off its just a plain old dumb phone. I turn the screen on and the notifications just flood in.
Edit: nothing in g settings is muted. The only thing i can think of is i don't have app data synced in accounts.
I think i figured it out. I had "sync app data" unchecked in accounts. So far I've been getting notifications screen on and off. Now if someone will just play back to me on wwf...
EDIT: i may have spoke too soon. It still doesnt wake up without turning on my screen
hey @SteveMurphy do you by chance use the active display?
razen_kain said:
hey @SteveMurphy do you by chance use the active display?
Click to expand...
Click to collapse
I did when I was using Omni and it worked great. I haven't used it since running RR, however.
So you're wifi connected, and have actively turned mobile data off? I have never even tried that...
If, however, you mean that this happens only when you're connected to WiFi, then no, I have not experienced this issue.
The only other setting that I can think of that pertains to sync is in system settings > Data usage > settings > [ ] auto-sync data, but I don't think that would cause the awake-vs-sleep sync issues that you're describing.
I used to use Active display, I currently use AcDisplay, I'll likely go back to using the baked-in active display.
razen_kain said:
[...](and this is only with wifi, not MD) I don't get my push notifications (gmail,fb,words,hangouts,etc) when the screen is off.[...]
Click to expand...
Click to collapse
cyril279 said:
So you're wifi connected, and have actively turned mobile data off? I have never even tried that...
If, however, you mean that this happens only when you're connected to WiFi, then no, I have not experienced this issue.
The only other setting that I can think of that pertains to sync is in system settings > Data usage > settings > [ ] auto-sync data, but I don't think that would cause the awake-vs-sleep sync issues that you're describing.
I used to use Active display, I currently use AcDisplay, I'll likely go back to using the baked-in active display.
Click to expand...
Click to collapse
No i never turn mobile data off. I just meant that notifications come as expected when I'm on mobile data but on Wi-Fi, once the phone hits deep sleep (<a minute) i won't get notifications unless i turn the screen on.
I ask about active display because i remember when on resurrection ROM i was using it and getting notifications then and kind of forgot about it but I'm on PAC 4.4 now and it's doing it again. However i was using the init.d scripts they have baked in but have them all turned back off now to see if that fixes it.
It's the strangest thing I've seen. It's like when I'm on Wi-Fi and turn the screen off it just disconnects from all data even though i can plainly see that it is not. Angela has the same phone with the same settings as mine but on RR 5.0.5 and she gets notifications fine.
@cyril279 I knnow this is off topic but have you tried this AD app? Its got some other features/customizations that aren't on the built in AD
https://play.google.com/store/apps/details?id=com.greatbytes.activenotifications
That was actually one of the first active-display variants that I tried. It worked well, but there were a couple hiccups that kept me shopping. The add-on AD clones have great features, but they don't play well with the stock lockscreen, or they leave the [home] button active, or involve significant lag when evoking the notification. The baked-in clones operate fluidly, but without the cool-stuff. I haven't tried active notifications recently though, maybe the updates have smoothed things out. I'm definitely down to try it again.
AcDisplay's development has been re-directed by Motorola. It's still my favorite of the clones, the beta version is boss, but it still isn't as fluid as the built-in boring-ol Omni AD.
razen_kain said:
@cyril279 I knnow this is off topic but have you tried this AD app? Its got some other features/customizations that aren't on the built in AD
https://play.google.com/store/apps/details?id=com.greatbytes.activenotifications
Click to expand...
Click to collapse
cyril279 said:
That was actually one of the first active-display variants that I tried. It worked well, but there were a couple hiccups that kept me shopping. The add-on AD clones have great features, but they don't play well with the stock lockscreen, or they leave the [home] button active, or involve significant lag when evoking the notification. The baked-in clones operate fluidly, but without the cool-stuff. I haven't tried active notifications recently though, maybe the updates have smoothed things out. I'm definitely down to try it again.
AcDisplay's development has been re-directed by Motorola. It's still my favorite of the clones, the beta version is boss, but it still isn't as fluid as the built-in boring-ol Omni AD.
Click to expand...
Click to collapse
Well all my testing so far has lead me no where with the exception of using that app. So far, I've not been able to reproduce the problem while using it. The question is,"what is it doing" to make it work....
EDIT: The app does not fix it....
just thinking out loud herebut, could this be a kernel issue? Im currently using PAC's kernel that comes packaged in the rom. Maybe I should try @RenderBroken 's kernel...?
Edit: Using RB's kernel breaks some of the PAC features and it did not fix my notification issue
https://code.google.com/p/android/issues/detail?id=42272
razen_kain said:
just thinking out loud herebut, could this be a kernel issue? Im currently using PAC's kernel that comes packaged in the rom. Maybe I should try @RenderBroken 's kernel...?
Edit: Using RB's kernel breaks some of the PAC features and it did not fix my notification issue
https://code.google.com/p/android/issues/detail?id=42272
Click to expand...
Click to collapse
PAC uses a modified ramdisk compared to other CM derived roms. Are you only having issues trying to get PAC running on your phone? Is it KK or JB?
RenderBroken said:
PAC uses a modified ramdisk compared to other CM derived roms. Are you only having issues trying to get PAC running on your phone? Is it KK or JB?
Click to expand...
Click to collapse
Its 4.4 and I have faced this issue on every rom Ive tried since switching to KK. Im starting to wonder if it's not an issue with my wifi. Im wondering if maybe my wifi is suspending my connection when my phone goes quiet.
RenderBroken said:
PAC uses a modified ramdisk compared to other CM derived roms...
Click to expand...
Click to collapse
Render, great information as always. razen, I'm no help to you on this - just felt like popping in to say "hi".
SteveMurphy said:
Render, great information as always. razen, I'm no help to you on this - just felt like popping in to say "hi".
Click to expand...
Click to collapse
It's always good to have you around buddy.
[SOLVED] Not Receiving Notifications on WiFi
My suspicions have paid off!! I started suspecting my router was the culprit so i pulled out my old netgear2400 and hooked it up and low and behold my notifications starting lighting my phone up again!!
The problem was the Xfinity router that came from comcast. Apparently it was closing the "heartbeat" line to stay connected when the screen was off before the heartbeat would send again, if that makes sense.
For the time being I'm going to just use my netgear router BUT I was able to fix the problem with the Xfinity router by using an app called Push Notification Fixer. Just install it, follow the instructions, and set the WIFI/mobile data heartbeat to the recommended settings. If that don't work start shortening the heartbeat time. It'll make sense when you see the app.
Hope this helps someone else along the way. I went a LONG WAY down the google rabbit hole before I figured this one out.
Great news, glad it was an easy fix!
razen_kain said:
My suspicions have paid off!! I started suspecting my router was the culprit so i pulled out my old netgear2400 and hooked it up and low and behold my notifications starting lighting my phone up again!!
The problem was the Xfinity router that came from comcast. Apparently it was closing the "heartbeat" line to stay connected when the screen was off before the heartbeat would send again, if that makes sense.
For the time being I'm going to just use my netgear router BUT I was able to fix the problem with the Xfinity router by using an app called Push Notification Fixer. Just install it, follow the instructions, and set the WIFI/mobile data heartbeat to the recommended settings. If that don't work start shortening the heartbeat time. It'll make sense when you see the app.
Hope this helps someone else along the way. I went a LONG WAY down the google rabbit hole before I figured this one out.
Click to expand...
Click to collapse
Great news! Now you just need to install DD-wrt on your router and turn it from a $40 router to a $400. I know you like to tinker but check it out. ITs free and its just firmware for certain routers. It turned my old wrt54g into a baus
razen_kain said:
My suspicions have paid off!! I started suspecting my router was the culprit so i pulled out my old netgear2400 and hooked it up and low and behold my notifications starting lighting my phone up again!!
The problem was the Xfinity router that came from comcast. Apparently it was closing the "heartbeat" line to stay connected when the screen was off before the heartbeat would send again, if that makes sense.
For the time being I'm going to just use my netgear router BUT I was able to fix the problem with the Xfinity router by using an app called Push Notification Fixer. Just install it, follow the instructions, and set the WIFI/mobile data heartbeat to the recommended settings. If that don't work start shortening the heartbeat time. It'll make sense when you see the app.
Hope this helps someone else along the way. I went a LONG WAY down the google rabbit hole before I figured this one out.
Click to expand...
Click to collapse
I'm having the same issue with KitKat CM11 ROM on my HP Touchpad (which is WiFi only), and will have to try this. Notifications come in instantly on my iPhone/iPads, but my Touchpad gets some serious delays...sometimes right away, and sometimes delayed.
By the way, did "Sync App Data" setting for an account have anything to do with push notifications, or is that more for backup purposes?
---------- Post added at 02:32 PM ---------- Previous post was at 02:04 PM ----------
Oh darn, mine is still delayed even with the push notification fixer installed and WiFi heartbeat at 5min. Even after I've just rebooted my Touchpad, actively using it, and not even 5 minutes has passed. Delay was 8 minutes and then the notifications came streaming in.
With Android/KitKat, do you have to have the app open in the background for push notifications to go thru? Or run the app at least once after a reboot?
I've scoured the internet for every forum thread or article I could find on this issue, and I've tried many of their fixes as well as my own. I own an unlocked S10 lite North American variant. So far the only app I have found that doesn't perform properly is Snapchat, and the issue is only with sending messages, not receiving or viewing them. Messages will sit on "waiting to send..." until I turn off WiFi and go back to data, after which they will immediately send. This is a really big issue for me as I use Snapchat very often as my main mode of communication for most of my friends and family. Luckily I have unlimited data, I'd be screwed if I didn't. If anyone needs or wants more info I'll be more than happy to provide it. If anyone has any ideas on how to fix this, they'd be much appreciated, I've been dealing with this problem for about a week now and it's really starting to bug me.
Edit: I'd also like to state that this issue has been happening for me since I bought the phone brand new last week. I have not done any modifications such as rooting.
Go to settings and search for Wi-Fi control and in that check for Snapchat, it is allowed or not?
ammarwajihi said:
Go to settings and search for Wi-Fi control and in that check for Snapchat, it is allowed or not?
Click to expand...
Click to collapse
Snapchat is allowed under Wi-Fi control settings.
15brutus said:
Snapchat is allowed under Wi-Fi control settings.
Click to expand...
Click to collapse
Its proper then. Don't know this is weird. Did you try it with any other Wi-Fi connection?
ammarwajihi said:
Its proper then. Don't know this is weird. Did you try it with any other Wi-Fi connection?
Click to expand...
Click to collapse
I have two routers in my home... It seems to only happen when I'm connected to a 5g router, 2.4Ghz works just fine as far as I can tell.
Edit: I stayed on my 2.4ghz router and now snapchat is acting up again after about 40 minutes, however it was functioning correctly until that point.
just ran across this setting in mobile data and was wondering if you had checked to see if any apps were set on this.