Related
Hi all
Background: I'm no stranger to modding devices in general but I'm not an expert in Android modding. Just a tinkerer.
I love my Nexus 10 but it's feeling a little unloved after my attempt to update it to 4.4 KitKat. Until recently I was running:
Android 4.3 (JWR66Y build)
Rooted using the Nexus Tool Kit
SuperSU
Storage encryption using the built-in cryptfs functionality
TWRP recovery
The device automatically downloaded the KOT49H (4.4.2) OTA update. I went to the XDA IRC channel on Freenode and asked in there if it'd be OK to let it install. They said yes, it'll be fine but I might need to re-root. I let it install. It soft-bricked it. All I got was the KitKat boot animation.
I went into Fastboot, wiped and flashed the KOT49H stock build to the device. I don't have root and the device is fresh as a daisy (apart from having TWRP recovery still).
What I wanted to know is why the device became bricked. Judging by the other / threads / I found in the forum there seems to be some disagreement as to the actual process and even possibility of installing the OTA delta updates.
Can someone clarify why the device became bricked and help with avoiding such issues in future? I have a freshly updated device and I'd like to know what steps I should take to avoid having to wipe the tablet each time I want an OS update.
Thank you in advance
New Years Eve
NYE was a bad time to post! Bump?
DijitalJB said:
NYE was a bad time to post! Bump?
Click to expand...
Click to collapse
OTA updates will not work if you have a custom recovery installed (TWRP). You could have pulled the OTA update zip out of cache and moved it to storage and used TWRP to "Install" it or download it yourself and install it with TWRP. It's odd that it was bricked because normally it will just fail and throw an error (has unexpected contents). I know that if it fails while installing the update with TWRP, it will tell you what file or app in the system caused the problem. An OTA update will normally only work if you have the stock recovery and nothing in the system has been modified. Basically, the update will check to see if anything has been modified that is going to be updated. A major update like from 4.3 to 4.4 everything pretty much gets updated. A minor update like from 4.4.1 to 4.4.2 not a lot got updated so you might get away with some files being modified. Also... if you flash everything in the factory image Except the userdata image you will not lose your settings and user apps. If you want to install the OTA with TWRP and have modified the system or kernel you can just flash the system.img or boot.img so that the OTA will work. Make sense?
Flashing system.img and boot.img only
wantabe said:
...if you flash everything in the factory image except the userdata image you will not lose your settings and user apps. If you want to install the OTA with TWRP and have modified the system or kernel you can just flash the system.img or boot.img so that the OTA will work....
Click to expand...
Click to collapse
Thank you wantabe. That does make sense, yes. I've found the section of the Nexus Root Toolkit that will allow me to flash the individual images, and I've dissected the build archive from Google and found where those .img files are, which is cool.
My only follow up question is: when I first boot will the system do any kind of checking/upgrading of the existing userdata to make sure it's compatible? Is this automatic? I ask because I recall the update process involving something like this when I went from 4.0 to 4.1 on my phone.
Thanks in advance
DijitalJB said:
Thank you wantabe. That does make sense, yes. I've found the section of the Nexus Root Toolkit that will allow me to flash the individual images, and I've dissected the build archive from Google and found where those .img files are, which is cool.
My only follow up question is: when I first boot will the system do any kind of checking/upgrading of the existing userdata to make sure it's compatible? Is this automatic? I ask because I recall the update process involving something like this when I went from 4.0 to 4.1 on my phone.
Thanks in advance
Click to expand...
Click to collapse
When you boot? No. When you update it will check the system not the userdata.
ASUS MeMO Pad 8 (K011) ME181C Recovery Guide
The following is a list of what we can currently do with this tablet. It assumes firmware versions with the WW prefix (WW-3.1.23.1xx).
Root Status: Obtained
Bootloader: Locked
CWM Recovery Possible: Yes (Tethered)
Custom ROMS: None
The following information is for recovering your tablet and obtaining root only. The bootloader is locked on the device at this time.
Tethered CWM recovery
This is a temporary solution to unsigned loading. The bootloader on the device is currently locked, so after rebooting, it will revert back to standard recovery. Use this to restore to a stock firmware or to install SuperSU.
Download the official firmware and extract it.
Rename UL-K011-WW-3.1.23.172-user.zip to user.zip.
Copy user.zip to the root of your SD card.
Enable USB debugging on your tablet.
Run Launcher.bat.
Type ACCEPT.
Choose option T3.
This will reboot in to the Tethered Recovery.
Choose Install Zip from external SD card.
Choose user.zip
Reboot once finished.
Bootable Image for Recovery
This file is to be used if your system will not get past the Asus or Intel logo. Boot the system using Volume Up and Power. Once the logo appears, let go of power. Once in DroidBoot, use fast boot to flash the boot and system images. This is provided in case signature verification fails on the official images.
fastboot flash system system.img
fastboot flash boot boot.img
This file also contains adb and fastboot. If your tablet is not detected, try the Asus drivers.
Reboot the system and use the CWM tethered recovery to reinstall the official firmware.
OTA Updates
If you’ve recovered from the official firmware on the Asus site, you’re probably sitting at version WW-3.1.23.172. Here are the OTA updates to bring your system up to the current version of WW-3.1.23.189. There are two different OTA updates available here, so the process will need to be completed twice. Update 172 to 183 and Update 183 to 189.
Boot in to recovery, press the volume keys several times and install from ADB.
Extract the RAR file and rename the files update.zip.
On your PC, open a command prompt and change to the directory containing the update file
Assuming ADB is installed on the system, type: adb sideload update.zip
Once the process completes, reboot your system and update apps as needed.
Repeat this process for any additional update files.
Recovery image
This is the default recovery for the tablet. If you get adventurous and try to flash another one, this may come in handy.
can you explain
RemmyLee said:
All thanks to vampirefo for his work on this.
FB Tethered Recovery Launcher
Kind of curious if this method will work with the other versions of the tablet to allow SuperSU to be installed. Anyone want to try it?
Long story short, I screwed this thing messing with the framework. For some reason, the official firmware from the Asus site was failing signature verification when trying to reinstall. Someone managed to grab a stripped system image that at least gave me a launcher and USB debugging. This beauty allowed me to get the firmware installed and everything back to normal, as well as installing SuperSU.
If you have any trouble getting the tablet to show up in Windows, the Asus distributed drivers work like a charm.
Click to expand...
Click to collapse
can you explain in lamens terms or retard terms what this means you found? so me and others
as well can understand ? Please and thank you i have a ASUS MEMO Pad 8 Me181c Rooted With Frame1.4apk it took me to demo and i turned it off and rebooted and now it just goes to The ASUS Logo and then Intel Logo and Stops . If i could find a way to install CWM on this maybe i could get somewhere but all i see is people talking about it but no video tutorials , or walkthroughs
Any Help Would be greatly appreciated
1. https://cloud.mail.ru/public/2b47381cb37c/ADB.rar - This contains adb and fastboot if you don't already have them installed. This also contains the system image that we're going to use temporarily to get this thing restored.
2. Hook it up to your computer and load up Fastboot on the tablet (Volume+ and Power while booting. Let go of power after the logo shows up).
3. Flash the System image ( fastboot flash system system.img) followed by the boot image (fastboot flash boot boot.img)
4. Reboot.
5. https://www.androidfilehost.com/?fid=95857557620392052 - Next, we're going to use a temp version of CWM-Recovery to reinstall firmware. Enable USB debugging, run launcher.bat, type "ACCEPT" and choose T3.
6. You'll auto reboot into CWM-Recovery. Grab the official firmware from the Asus site and install the zip from SD. Once complete, you'll need to reroot the device most likely. If you have a SuperSU zip, install it after you've restored the system.
You're done. This also opens us up for just about anything. Go play with your system. As long as you don't mess up your boot loader, this should save you.
Sent from my K011 using XDA Free mobile app
Asus MeMo Pad 8 - Pro 7 Entertainment Pad
Hey guys,
I have a Asus MeMo Pad 8 - Pro 7 Entertainment Pad. Now the model is K011 and the firmware starts with LVL bla bla bla.
Technically it is the same as the 181C and I also have managed to achieve root. Any ide if I could get the WW firmware and rom working on this?
UPDATE:
Using this method gives you version 172 of the firmware. Current version is 189. So here are the OTA updates.
To use these files, Start up the system in Droidboot, Volume+ and Power, go to recovery. You'll be sitting a broken android robot screen. Press the volume keys several times. It's give you some options. We're going to install from adb.
Unrar the update file provided, rename the file to update.zip and sideload it to the tablet. Once it finishes, reboot and wait for the system to update. Rinse, lather, repeat for 183 to 189.
Files:
OTA update 172 to 183
OTA update 183 to 189
Note: This is only if the OTA updates aren't pushing to your device. If you've got them, you can skip this.
fulishone: If the intel tether works for you, you could always try it, but I have no idea if it would work or not. If you have your system backed up, you could always give it a go and restore if it fails.
I'll try to compile everything in to a more readable format later. I just want to get the info up right now. A lot of people were semi bricked either because of a root gone bad or file system problems.
shadow2483 said:
can you explain in lamens terms or retard terms what this means you found? so me and others
as well can understand ? Please and thank you i have a ASUS MEMO Pad 8 Me181c Rooted With Frame1.4apk it took me to demo and i turned it off and rebooted and now it just goes to The ASUS Logo and then Intel Logo and Stops . If i could find a way to install CWM on this maybe i could get somewhere but all i see is people talking about it but no video tutorials , or walkthroughs
Any Help Would be greatly appreciated
Click to expand...
Click to collapse
If you need any more help than whats above, let me know.
fulishone said:
Hey guys,
I have a Asus MeMo Pad 8 - Pro 7 Entertainment Pad. Now the model is K011 and the firmware starts with LVL bla bla bla.
Technically it is the same as the 181C and I also have managed to achieve root. Any ide if I could get the WW firmware and rom working on this?
Click to expand...
Click to collapse
To answer your question, yes. This will work. We have the same firmware for our devices.
http://www.asus.com/my/Tablets/ASUS_MeMO_Pad_ME181CX/HelpDesk_Download/
RemmyLee said:
To answer your question, yes. This will work. We have the same firmware for our devices.
http://www.asus.com/my/Tablets/ASUS_MeMO_Pad_ME181CX/HelpDesk_Download/
Click to expand...
Click to collapse
Ok, I am not new to flashing and custom roms and so on, but follwing your guide above, I should first flash .172 and then use your update files for .183 and the .189?
What do you mean with Intel thether?
Best regards
fulishone said:
Ok, I am not new to flashing and custom roms and so on, but follwing your guide above, I should first flash .172 and then use your update files for .183 and the .189?
What do you mean with Intel thether?
Best regards
Click to expand...
Click to collapse
Yep. That'll get you updated to the current firmware. I contacted ASUS yesterday and sadly, there are no plans on bringing Lollipop to this thing, nor are they interested in giving us an unlocked bootloader.
As for the Intel Tether, where the bootloader is locked, we can use a tethering method to access CWM recovery, but once we reboot, it reverts back to the standard recovery. This prevents us from using custom roms at this time. When it reboots, it checks signatures. The official firmware was not installing using the standard methods, so I used CWM to reinstall. That's why I included it above.
BBY builds
My guess is that this won't work with the BBY build. From what I understand no one has rooted an ME181C that has a BBY build. I also have not been able to connect the device to my PC. From reading this thread though it appears that to connect through the device drivers I need to boot into one of the recovery mode. Is that correct? I can see my sd cards okay when connected, but can't see the device through ABD.
et1ssgmiller said:
My guess is that this won't work with the BBY build. From what I understand no one has rooted an ME181C that has a BBY build. I also have not been able to connect the device to my PC. From reading this thread though it appears that to connect through the device drivers I need to boot into one of the recovery mode. Is that correct? I can see my sd cards okay when connected, but can't see the device through ABD.
Click to expand...
Click to collapse
I'm curious to know if the tethered method would allow a temporary CWM session to install SuperSU on the BBY line. I haven't seen anyone try it yet. If USB debugging is enabled, the tethered restore should try to automagically do everything for you. If you boot in to recovery, can you do a fastboot devices?
Can´t mount external sd card anymore
After using CWM tethered recovery to backup my rom, i cant mount my external sd card anymore. Any ideas?
Updates
RemmyLee said:
UPDATE:
Using this method gives you version 172 of the firmware. Current version is 189. So here are the OTA updates.
To use these files, Start up the system in Droidboot, Volume+ and Power, go to recovery. You'll be sitting a broken android robot screen. Press the volume keys several times. It's give you some options. We're going to install from adb.
Unrar the update file provided, rename the file to update.zip and sideload it to the tablet. Once it finishes, reboot and wait for the system to update. Rinse, lather, repeat for 183 to 189.
Files:
URLS removed to post
Note: This is only if the OTA updates aren't pushing to your device. If you've got them, you can skip this.
fulishone: If the intel tether works for you, you could always try it, but I have no idea if it would work or not. If you have your system backed up, you could always give it a go and restore if it fails.
I'll try to compile everything in to a more readable format later. I just want to get the info up right now. A lot of people were semi bricked either because of a root gone bad or file system problems.
Click to expand...
Click to collapse
---------------------------------------------------------------------------------------------------------
Thanks for posting this. It helped recover my tablet to 172. I see 172 on ASUS's website, but not the updates, and my tablet says it's up to date. Can you advise what 183 and 189 provide? Any new features or enhanced stability or performance.
Thanks in advance. Very much appreciated.
tperki said:
---------------------------------------------------------------------------------------------------------
Thanks for posting this. It helped recover my tablet to 172. I see 172 on ASUS's website, but not the updates, and my tablet says it's up to date. Can you advise what 183 and 189 provide? Any new features or enhanced stability or performance.
Thanks in advance. Very much appreciated.
Click to expand...
Click to collapse
For some reason, OTA updates for this thing don't want to download. I've not seen too much of a change between them, but I applied them just to be current.
Success
RemmyLee said:
For some reason, OTA updates for this thing don't want to download. I've not seen too much of a change between them, but I applied them just to be current.
Click to expand...
Click to collapse
Yeah, strange that it won't update over the air. But thanks to your assistance I am running build 189. It may just be wishful thinking, but the device does seem a bit peppier. Thank you RemmyLee!!!!
[Update] Since updating to build 189, the device is much more stable and snappier. This was definitely worth doing. I don't understand why ASUS would not be pushing this out to everyone with this device.
Just wanna say thanks to the OP. Got my tablet back from the service center and was wondering why some apps were missing. Sure enough I was on WW...179. Nice to have updates and recoveries in one place. Great work!
Thank you so much bro, I have been googling a lot trying to find a root method and just discovered that I can easily have recovery and flash supersu zip thanks to you!!
Me181c not working...
Hi guys, I was using SoftKeyZ for about 2 weeks, I wanted to set my navigation buttons to it's default, so I tried using Backup of the SoftKeyZ, but when it rebooted the tablet, I lost my navigation buttons and indeed my notification and status bar. It rebooted again automatically, and this time when it started, I got an error which says: "Unfortunately, KeyguardTestActivity haas stopped", the error prevents me from unlocking the tablet and using it, so I cannot use it at all. I don't know how to go to recovery mode on my tablet, I used the button tips but it didn't work for me. I've downloaded the official rom from asus.com . Pleeeeeeeeeeeeeeeeeeeeeease, I need your help guys, you're my last chance...
should I do a complete wipe ?
Hi,
Thanks for the help in this thread.
I followed the instructions and successfully flashed the update firmware file. I was expecting for the tablet to be reset to original factory condition but found that all my apps ect were still there. I guess the user.zip is an update rather that a full ROM or should I have wiped everything first ?
I am have problems with the tablet such as Bluetooth has stopped working and wifi will only connect to very strong signal, (as in touching the router) which is why I wanted to completely wipe the device a start fresh.
f I wipe everything will the firmware file be able to restore the system fully?
Is there a complete firmware image file that can be downloaded any where ?
Thanks in advance for any advice
update : so fed up with no Bluetooth so I took the chance and did a full factory wipe and the system restored ok with the firmware file. Bluetooth problem solved, (Wifi did not, probably Hardware issue)
Thanks again
Signature failure
Thanks to your instructions, I've successfully managed to update my device to build WW-3.1.23.172, however, when trying to install 172 to 183 update I get a signature verification failure message.
Any ideas why this is happening?!
Hi guys,
this is my first thread in a forum ever, so please don't be too mad at me.
So now to my question:
Is it possible to make something like a backup point on android, I mean to extract ALL files (plus the state of the OS) like on Windows.
I haven't found anything on google yet and maybe I opened the thread in the wrong category please move it then (if that is possible, I already said it's my first thread and I'm not used to forums).
I know that you can backup your data on PC and so on and then make a factory reset and load all the data in. But now that Android 7 came out and my phone (Vernee Apollo Light) will get the update soon for safety reason I want to backup my almost new phone with the OS state so that if my phone dies at some point because of the new OS I want to restore it easily with some sort of what I call backup point.
Another question is is this even nessesary or will it also reset the OS, if I do a factory reset, to a further OS (in my case I update to Android 7, the phone crashes, I restore to factory mode and have my Android 6 again)or will it only reset to Android 7 through factory mode reset?
And if I need such restore point could one of you please give me an instruction how to do that.
Thank you for your patience to read and thank you for solving it in advance.
Best regards, n16h70wl aka Lukas Heuschneider
http://bbs.vernee.cc/forum.php?mod=viewthread&tid=981
You would need TWRP to do a nandroid backup.
n16h70wl said:
Hi guys,
this is my first thread in a forum ever, so please don't be too mad at me.
So now to my question:
Is it possible to make something like a backup point on android, I mean to extract ALL files (plus the state of the OS) like on Windows.
I haven't found anything on google yet and maybe I opened the thread in the wrong category please move it then (if that is possible, I already said it's my first thread and I'm not used to forums).
I know that you can backup your data on PC and so on and then make a factory reset and load all the data in. But now that Android 7 came out and my phone (Vernee Apollo Light) will get the update soon for safety reason I want to backup my almost new phone with the OS state so that if my phone dies at some point because of the new OS I want to restore it easily with some sort of what I call backup point.
Another question is is this even nessesary or will it also reset the OS, if I do a factory reset, to a further OS (in my case I update to Android 7, the phone crashes, I restore to factory mode and have my Android 6 again)or will it only reset to Android 7 through factory mode reset?
And if I need such restore point could one of you please give me an instruction how to do that.
Thank you for your patience to read and thank you for solving it in advance.
Best regards, n16h70wl aka Lukas Heuschneider
Click to expand...
Click to collapse
You can use SP flash tool to dump your rom. I don't know it works for you. If your android is rooted then you can backup your whole system via adb to your pc. You can also use custom recovery to get nandroid backup(system backup) of your android to your SD card. You need to flash custom recovery for your android.
There after you need to unroot your android and flash stock recovery again. If OTA update found your android modified then OTA update abort.
It's better to download your stock rom. If android update ruins your android then you can flash your stock rom in fastboot mode
If you update your android to Nougat and factory reset then it's not reset to again marshmallow. Factory reset only reset system and user data. So it's only reset your Nougat to factory state.
Thanks for your reply.
So I probably have to root my Android don't I?
n16h70wl said:
Thanks for your reply.
So I probably have to root my Android don't I?
Click to expand...
Click to collapse
Use SP flash tool to dump rom of your non rooted android in your pc.
You can root to get backup of your full system. But you want to unroot again because if OTA update found that your system is modified then OTA update abort. So don't root your android.
It's better to use SP flash tool to dump rom or download stock rom of your android and keep it in pc.
If update ruins your android then you can flash stock rom in fastboot mode to your non rooted android.
If it helped. Please thank me.
Lineage installation on N200 REQUIRES that you are running Android 11 or phone will soft loop after installing the Lineage boot.img
If you are updated to Android 12 firmware and want to install Lineage, you MUST downgrade first to:
DE2117 OEM Android 11 FINAL OTA
WARNING: This WILL erase all user data.
1. Place the firmware .zip file in the user root of internal phone storage.
2. Sideload OnePlus firmware Downgrade Tool on phone and use tool to flash the Android 11 firmware.
There is an Emergency Firmware install tool that OnePlus posted to the OP forum that does NOT check root status when the need to downgrade back to A11 was first acknowledged due to modem issue with first A12 OTA release.
This file was removed in a few days when they posted the official Downgrade tool replaced it.
I have used this tool to upgrade DE2117 C_16 to DE2117 C_17 while rooted and the built in upgrade tool failed at 37%.
Nice, first thanks for the hard work you're putting in. Second, is there an advantage to converting first to DE2117 then installing lineage as opposed to just installing lineage from DE2118 that you know of? I know in the other post you answered my other question stating that the Lineage will install on either so I wasn't sure if I'd get any benefit from starting over and converting my DE2118. TIA
Link575 said:
Nice, first thanks for the hard work you're putting in. Second, is there an advantage to converting first to DE2117 then installing lineage as opposed to just installing lineage from DE2118 that you know of? I know in the other post you answered my other question stating that the Lineage will install on either so I wasn't sure if I'd get any benefit from starting over and converting my DE2118. TIA
Click to expand...
Click to collapse
Lineage is using own kernel and boot.img on A11 so in the short run it is not going too make any difference, but when Lineage moves forward to A12 the OEM Firmware has newer drivers and is updated sooner, has more OEM features and bugfixes as well as no carrier bloatware.
It is possible that OP will neuter the Carrier firmware with an OTA update to prevent cross flashing device away from the Carrier rom in the next OTA update by preventing fastbootd from flashing the us oem from a carrier phone.
They have already removed fastboot boot command to boot a boot image without flashing it for test before you flash and to allow Magisk to make a backup of the original boot.img before adding Magisk.
I would convert NOW, before they decide to slam the door on this ability with a future OTA that will not allow you to downgrade and prevent this as they are under contract with the carriers to not allow this to be done.
Ok, thank you for the explanation. Guess I'll back everything up and convert it.
scanman0 said:
Lineage installation on N200 REQUIRES that you are running Android 11 or phone will soft loop after installing the Lineage boot.img
If you are updated to Android 12 firmware and want to install Lineage, you MUST downgrade first to:
DE2117 OEM Android 11 FINAL OTA
WARNING: This WILL erase all user data.
1. Place the firmware .zip file in the user root of internal phone storage.
2. Sideload OnePlus firmware Downgrade Tool on phone and use tool to flash the Android 11 firmware.
There is an Emergency Firmware install tool that OnePlus posted to the OP forum that does NOT check root status when the need to downgrade back to A11 was first acknowledged due to modem issue with first A12 OTA release.
This file was removed in a few days when they posted the official Downgrade tool replaced it.
I have used this tool to upgrade DE2117 C_16 to DE2117 C_17 while rooted and the built in upgrade tool failed at 37%.
Click to expand...
Click to collapse
This worked perfectly after following your convert guide and upgrading to 12. Downgraded back to 11 so I could install lineageOS. Thanks again!
This reddit post has a link to an English version of the downgrade apk which makes it a little easier.
keeps saying verification failed
weirdfate said:
keeps saying verification failed
Click to expand...
Click to collapse
Did you remove root (Restore boot.img) and then factory reset?
You will loose all data doing this anyway.
I m trying as well .. but stuck with verification failed message just as scanman0 I m on stock android12 no root if anyone know how to fix it ... please assit
I just downgraded. Make sure you remove root via magisk. Then proceed to rollback to Android 11. Everything worked fine. I'll install lineage tonight when I get home.
radekmazur said:
I just downgraded. Make sure you remove root via magisk. Then proceed to rollback to Android 11. Everything worked fine. I'll install lineage tonight when I get home.
Click to expand...
Click to collapse
I did not have to remove root. I used the version posted that does not check for root but maybe there's a different reason.
Does the downgrade apk have to be sideloaded via ADB?
T3CHN0T33N said:
Does the downgrade apk have to be sideloaded via ADB?
Click to expand...
Click to collapse
Just place apk in phones working directory, same path where your downloads folder is. Then install from there like any other apk and run. I also kept the FW file in the same directory but I'm not sure if that was necessary.
So, just to confirm, I press "local install" and select the firmware zip and it closes? Is the tool supposed to do anything else or am I good to flash LineageOS?
T3CHN0T33N said:
So, just to confirm, I press "local install" and select the firmware zip and it closes? Is the tool supposed to do anything else or am I good to flash LineageOS?
Click to expand...
Click to collapse
Ummm if I remember correctly hit local install and then it will prompt to point towards which FW to use. After you hit it, it will go back to the previous screen, I think verify and unpack it, then install it. Mine did appear like it was doing nothing after picking the FW and so I picked again which screwed things up so just wait after picking, it should start.
After its done it will give a message saying to restart phone I think for it to take effect, then after you restart it should ask to wipe phone, then restart again and you'd be in A11 presumably. Once in A11 your good to follow the normal procedure to install Lineage. This is all from memory though so I MAY have missed something but I don't think I did.
Link575 said:
Ummm if I remember correctly hit local install and then it will prompt to point towards which FW to use. After you hit it, it will go back to the previous screen, I think verify and unpack it, then install it. Mine did appear like it was doing nothing after picking the FW and so I picked again which screwed things up so just wait after picking, it should start.
After its done it will give a message saying to restart phone I think for it to take effect, then after you restart it should ask to wipe phone, then restart again and you'd be in A11 presumably. Once in A11 your good to follow the normal procedure to install Lineage. This is all from memory though so I MAY have missed something but I don't think I did.
Click to expand...
Click to collapse
When you say "screwed things up" what do you mean? How did it effect the install?
T3CHN0T33N said:
When you say "screwed things up" what do you mean? How did it effect the install?
Click to expand...
Click to collapse
Nothing major, caused the UI to glitch out and made it seem like the process was stuck at 81% but when I closed the app and tried to do it again it jumped to 100 and said to restart the device.
I've downgraded a second time (I'm very indecisive on which OS I want to use) and that one went as expected since I knew to give it a second to start doing its thing.
Link575 said:
Nothing major, caused the UI to glitch out and made it seem like the process was stuck at 81% but when I closed the app and tried to do it again it jumped to 100 and said to restart the device.
I've downgraded a second time (I'm very indecisive on which OS I want to use) and that one went as expected since I knew to give it a second to start doing its thing.
Click to expand...
Click to collapse
Weird, for me it just closes the app and does nothing, both the official and emergency ones. I even tried adding it to magisk's deny-list.
But I just restored the boot image via magisk (didn't restart) and it works now...
scanman0 said:
Did you remove root (Restore boot.img) and then factory reset?
You will loose all data doing this anyway.
Click to expand...
Click to collapse
Yes I factory restored the phone and tried again. Still fails every time
Has anybody had any luck figuring out the verification failed message? I too have tried both the official and emergency apps, of course I can't read the actual message in what I presume is Chinese, but it doesn't do anything and the other version says verification failed. Have not rooted. Kind of at a loss right now and all I want to do is install Lineage! I've already got my unlock token from OnePlus, but my understanding is that the phone still needs to be on A11 before installling Lineage.
Hi
Quite bored of Oneplus updates for my Nord 2 5G that transforms more and more the phone in publicity support for OnePlus CEO messages, and adding features I don't care at all, I'm looking to flash it with an alternative ROM.
What is most stable and operational ROM for that device currently ? The version of the device I have is DN2103 (bought in Switzerland).
Thanks for your advices,
Vincèn
Tried them all. Evolution X is the most often updated and works the best for me.
Hey there!
I also need some much needed insight in how to continue with this device (DN2103 bought in NL, Europe; just updated from 11.A.14 to 11.A.21). I suspect I will probably need the same answer as OP is looking for.
This is my second OnePlus, I was using a OnePlus X before running my first and only ROM, Lineage OS, to be able to move on to Android 10. Then screen broke for the second time after I had already fixed up the whole phone myself before that using brand new parts (Screen, frame, backplate) except for the motherboard still original. So I decided it was time for a new device.
Really love the DN2103 itself, except for the whole rooting / OTA update process, although it was a good training in getting to know all the technicalities. I had been running rooted 11.A.14 since it came out till yesterday, because I was avoiding dealing with the whole process again.
Anyway I kicked myself under my butt and got myself to 11.A.21 now. I was planning to just continue updating OOS till the latest 11.C.10 / 11.C.13, because after all this effort, I'm too curious to not check out the new Android.
But I just happened to read some thread where people were saying that somewhere after 11.C.4 it's not possible anymore to get into fastboot / BROM mode and thus no means to get TWRP?? That sounds horrible, one mistake rooting and it would be a big mess, having to downgrade to OOS 11 again and bla bla bla, why the f...?
So, I just need to hear this from someone, is this correct? I'm too tired to investigate now myself after a 20h OTA/rooting session behind me and just 3h sleep.
And how is everyone dealing with it that wants root? Has everyone moved on to other ROMs for Android 12 / 13, because of this?
In the update process yesterday for some reason my phone did a complete wipe without asking / warning. So I really need to get to a stage in this update process where I can restore all my ****. I've been at this for 24h right now and was happy to do so as I was making steps. but now I suddenly got hit in the face by this news.
tl;dr PLEASE confirm/deny this news (underlined part above) and help me decide if the only comfortable way is to ditch OOS for a custom ROM to get Android 12 / 13 with root & TWRP. I've thrown 24 hours into OTA updating OOS 11, now got to 11.A.21, but phone somehow got wiped in process, so now I really need to finish upgrading and restore data, because I'm without all the apps / accounts etc. I depend on for daily life.
I do really enjoy the road but now I HATE being lost along the way. Show me the light and, if ROM, same question as OP
Sorry if a bit off-topic + long post...
Yes, you need to have android 11 to enter fastboot. I had 12 and had to downgrade. Trust me, this is the most fuked up thing.
wuttehhell said:
Yes, you need to have android 11 to enter fastboot. I had 12 and had to downgrade. Trust me, this is the most fuked up thing.
Click to expand...
Click to collapse
Stop waiting for oneplus. There are great roms on android 13 that work very nice. What i am using is Evolution X. Tried them all and this is the one i stick to. Found no bugs, very consistent updates and the team as i see work very fast on every bug people find.
Btw, u dont need root to change rom, only if you want. I personally dont use root and works great.
wuttehhell said:
Tried them all. Evolution X is the most often updated and works the best for me.
Click to expand...
Click to collapse
Thanks for the info, and noticed too in forum that it looks to be the most up-to-date and maintained ROM for DN2103 and it looks to have no more any blocking bugs such as Wifi or Bluetooth not working, or random reboots/crashes. I'm running right now version DN2103_11_C.12 with Android 12. Is it ok to upgrade to Evolution X straight ? as I see people speaking about downgrade first to Android 11 :/
wuttehhell said:
Stop waiting for oneplus. There are great roms on android 13 that work very nice. What i am using is Evolution X. Tried them all and this is the one i stick to. Found no bugs, very consistent updates and the team as i see work very fast on every bug people find.
Click to expand...
Click to collapse
Thanks a lot for confirming! I'd already read the thread and indeed Evolution looks like the best option, so that's decided then. Wish me luck flashing the ROM
And about root, I really have some essential mods that need root. For example Advanced Charge Controller (I use it with the GUI app ACCA for convenience, else it's only terminal). I limit my charging by default to 80%, which translates in about a 4x increase in lifetime of the battery. On normal days I don't need any more than that, and it always has the option to charge to 100% if you know you're gonna have a long day without charging capabilities.
vincebay said:
Thanks for the info, and noticed too in forum that it looks to be the most up-to-date and maintained ROM for DN2103 and it looks to have no more any blocking bugs such as Wifi or Bluetooth not working, or random reboots/crashes. I'm running right now version DN2103_11_C.12 with Android 12. Is it ok to upgrade to Evolution X straight ? as I see people speaking about downgrade first to Android 11 :/
Click to expand...
Click to collapse
As I understand, and as @wuttehhell just confirmed in this thread, once you update OxygenOS beyond Android 11, fastboot and BROM mode don't work anymore. This means you can't install a custom recovery like TWRP to flash a new ROM, neither can you flash it using fastboot.
This means you have to rollback to Android 11 first. Fortunately OnePlus has official rollback packages, which is just a .ZIP archive like any other update, except it will downgrade to a previous version. Warning: a rollback package will WIPE ALL DATA. So make sure to backup anything you need to keep before downgrading. The upside is you can do a clean flash of the ROM (flashing method where device gets wiped), which is the most stable method and gives you a fresh OS that will use less battery and such.
I think the process of downgrading itself is very simple though. If you get stuck let us know, there's many knowledgeable people here lucky for us so keep a positive attitude and with a little luck we'll both be running Evolution X in the coming days!
Releece said:
As I understand, and as @wuttehhell just confirmed in this thread, once you update OxygenOS beyond Android 11, fastboot and BROM mode don't work anymore. This means you can't install a custom recovery like TWRP to flash a new ROM, neither can you flash it using fastboot.
This means you have to rollback to Android 11 first. Fortunately OnePlus has official rollback packages, which is just a .ZIP archive like any other update, except it will downgrade to a previous version. Warning: a rollback package will WIPE ALL DATA. So make sure to backup anything you need to keep before downgrading. The upside is you can do a clean flash of the ROM (flashing method where device gets wiped), which is the most stable method and gives you a fresh OS that will use less battery and such.
I think the process of downgrading itself is very simple though. If you get stuck let us know, there's many knowledgeable people here lucky for us so keep a positive attitude and with a little luck we'll both be running Evolution X in the coming days!
Click to expand...
Click to collapse
@Releece thanks for the details and so if I have well understood the whole process:
backup datas
Downgrade to Android 11 using the OTA downgrade package and procedure from oneplus (which implies a full reset of device)
Reboot at least one tine in Android 11
Flash TWRP
Reboot in TWRP (be careful not to boot Android or I'll have to reflash TWRP)
Flash Evolution X zip
Boot normally and enjoy Evolution X
Am I correct ? I have seen also that the phone has the same annoying double "bank" when you flash it that I had on previous OnePlus phones. Does it imply I have to do each flashing process on both banks ?
Thanks
vincebay said:
@Releece thanks for the details and so if I have well understood the whole process:
backup datas
Downgrade to Android 11 using the OTA downgrade package and procedure from oneplus (which implies a full reset of device)
Reboot at least one tine in Android 11
Flash TWRP
Reboot in TWRP (be careful not to boot Android or I'll have to reflash TWRP)
Flash Evolution X zip
Boot normally and enjoy Evolution X
Am I correct ? I have seen also that the phone has the same annoying double "bank" when you flash it that I had on previous OnePlus phones. Does it imply I have to do each flashing process on both banks ?
Thanks
Click to expand...
Click to collapse
Yep that should do it, looks like you did your research and understand the process.
I had the same question earlier. Strangely I found that the Nord 2 does not have A / B partitioning. I can only detect an A-partition with apps designed to test it. I didn't have to do anything extra / another way while rooting with Magisk, OTA updates or flashing ROM. I thought A/B was enforced on all phones since Android 10 or sth, but apparently not all.
I would add one extra step, after you reboot into TWRP (before flashing the ROM) make a backup of all the individual partitions one by one (so you can restore any single partition in the future), even the tiniest ones.
Some contain calibration data for e.g. Bluetooth and fingerprint sensor that are specific to your device. Now this whole process should leave them untouched, but if anything ever happens to them, the only way to get your phone working again is to send your phone to a service centre, so it's a good idea to have everything backed up.
They will be stored in the TWRP folder in /sdcard/, which is the folder you can see on your PC. So after backing them all up, you can just copy them to your PC.
I successfully flashed Evolution yesterday, and all went well Initially the new Android 13 UI was a bit of a shock from what I was used to, but I'm starting to like it already, especially after going over the settings. And it works smooooth like butter. The only thing that annoyed me was the haptic feedback, which feels very mushy instead of snappy. But putting vibration strength to low helps a lot. Maybe I can find a way to modify it later.
I had one little hickup: Evolution install instructions say this for TWRP before flashing ROM:
"3. Tap [Wipe] , then [Format data]. type "yes" and Enter"
But when I did this, it removed the media folder at /data/media/ instead of just emptying it. I remember it gave me a pop-up saying something like, for /data/media/ to get populated I would probably need to boot to system. But if I would've done that stock would overwrite recovery.
I don't have a lot of knowledge about this, but this folder gets mounted to /sdcard/ and is where your internal storage is mounted to. So after the wipe I wanted to copy the ROM .zip to my phone using the file manager. Windows did recognize my phone as having internal storage, and I could open it, but it didn't see any file/folder/free space and I couldn't copy anything to it.
I solved it by renaming ROM to sth simple like evolution.zip, placing it inside platform-tools folder, and then using ADB push command, so it looked like:
ADB push C:/platform-tools/evolution.zip /data/
It doesn't give any feedback while copying and I didn't even see much disk usage on Windows task manager, so I was about to get nervous and close the terminal, but then it suddenly completed successfully and I could see the evolution.zip in TWRP file manager. After that flashing took just a few minutes and everything went perfect.
Now I don't know if it's maybe a typo in the instructions or if TWRP had a bug, but I don't think so as it specifically gave me a prompt about it. I think it's better to just tap [Wipe] and then do the usual factory reset slider, with data, dalvik and cache selected. Think I'll make a post later in the Evolution thread to ask.
Good luck!
Hi, I don´t like the colors on Oxygen OS. I don't know if it's cause by our screen or is something related with the ROM. In Samsung or Xiaomi colors are more brilliant and saturated. In Evolution ROM, can you modify this issue?
So I have been able to dowgrade my DN2103 to 11_A20 running Android 11 but I'm stuck there !
Each time I try to flash twrp or load it in device I get that:
[email protected]:~/Bureau$ fastboot boot twrp.img
Sending 'boot.img' (131072 KB) OKAY [ 3.310s]
Booting FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
[email protected]:~/Bureau$ fastboot flash recovery twrp.img
Sending 'recovery' (131072 KB) OKAY [ 3.371s]
Writing 'recovery' FAILED (remote: 'not allowed in locked state')
fastboot: error: Command failed
I have unlocked OEM protection into it and allow USB debug. Any ideas what's the problem ?
damn was a long time I had not done Android flashing so was a little more complicated but made it (well it looks to be so far Will see if it boots after initial setup and now hanging on the Phone initial preparation but should go very soon I think
Thanks