As I said several times, if someone starts to build the current version of the lineage that I do, I completely close the project.
In May, I closed the port, based on 10 android and now the time to completely close all work on exynos7870. There was only one reason why I didn't do it earlier - I promised to fix the sound during calls in the LTE version. Now all done, I dont have any desire and motivation to do anything for the exynos7870.
This decision is final, I switched now to the work on note pro 12.2 wifi variant, my smart home and think about starting tab s6.
Thanks to everyone who has been with me all these years, I will see you on other projects.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
Lineage Builds
SM-T580
15. 20200815: august security patch: https://drive.google.com/file/d/1m67wMYmMbQOCoNLxalgJ9Pv6T7ruQ2G6/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/1xgvXjydnklYZeVHz6Mumgf7jUAm6oSEz/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1Isqa8WAlghmCGTMSGnKEsfUX9dUicM0n/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1jY2riYpLUJ8EFtOMFSXo9o57_Ijr-qVm/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1hnEUDgcugxBLbhQw5d-q9mU75rierlZX/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi): https://drive.google.com/file/d/1K_K6yfJHmjCNJSR12eAh46-7FhagcT4Z/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1CcX6FnTon8OxM99qbUad9NW6rPrJbUgw/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/18axNa2sq6ekZeADBzTZeXlOOaJ1dg8WN/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi): https://drive.google.com/file/d/1mAAEstZz9sOSCFWZiujaGKv-kkslIEwV/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1R6JDLG-H8bP6eGvex7R2PTYsCbrfQpdu/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/1XsQ5qlP22XBGFQK6o1zKT0GLbVd_WlC7/view?usp=sharing
4. 20191003: https://drive.google.com/file/d/1LpthwW1Lf4fJW0nGwsThnJcZ8ToTKpUf/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1qfKSQhDOI4LkthCpOckJLew0zIAZHo67/view?usp=sharing
2. 20190928: fix charger, home button: https://drive.google.com/file/d/1HBaqEwLux9XjTVgHT3IGMXnrCuJaqgTw/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1z5VCwOX9M8-ckb1Wt75oON6aUjMpx2hT/view?usp=sharing
SM-T585
15. 20200815: august security patch: https://drive.google.com/file/d/1OgIcsnfRRr5bFx5gd1kvKvtb8lELIMQa/view?usp=sharing
14. 20200630: june security patch, review device tree, switch to samsung stock sound: https://drive.google.com/file/d/110Zz5mlotOnDuFAjtuC5vNKa4VU1N0_I/view?usp=sharing
13. 20200412: april security patch: https://drive.google.com/file/d/1-llAbO2lZQ2T1qq743MxXZNtuHp7eAUX/view?usp=sharing
12. 20200211: latest sources, February security patch: https://drive.google.com/file/d/1l0APlqEK20cgJIGbBzaaekBIJrNFkilr/view?usp=sharing
11. 20200113: latest sources, January security patch: https://drive.google.com/file/d/1OskSZS28m268HRcTeTqFO_HQKB7NgWky/view?usp=sharing
10. 20191202: rollback video driver to r22, merge kernel up to 3.18.140 (thanks @followmsi), aptx driver (thanks @followmsi), fix hotspot: https://drive.google.com/file/d/1hbwkqI1jpctUUitA0Zg1a3LPj02KfSTS/view?usp=sharing
9. 20191116: november security update: https://drive.google.com/file/d/1eb_RdaAw6JSCNb_EsSUsPQnvCqGF_OeF/view?usp=sharing
8. 20191114: beta version: update video driver up to r28, update omx codecs, latest updates from @followmsi: https://drive.google.com/file/d/1cewbOdJapapRjBbk1X8k2mv9B5viBPlD/view?usp=sharing
7. 20191028: disable Codec2.0 components (long delay on start youtube) (thanks @followmsi), fix vulkan libs (thanks @followmsi), fix hotspot (there is still a bug - you cannot turn on wifi after activating a hotspot? need reboot tablet, but at least hotspot working): https://drive.google.com/file/d/1mqsNknYnJSh5cbml7dQ-xd5m0a-KlyCm/view?usp=sharing
6. 20191013: audio from sources: https://drive.google.com/file/d/1ymo05w9m9xukDsfLrZz6iBJMKNgarF4x/view?usp=sharing
5. 20191007: fix sensors: https://drive.google.com/file/d/14jOLZjLPyClboBZ8H3C2O6Dt0kFmXghS/view?usp=sharing
4. 20191003: ril: https://drive.google.com/file/d/18ZPRh19Rao1xRPQ5zI9jz7WfYIdonLZ2/view?usp=sharing
3. 20190929: improved stability: https://drive.google.com/file/d/1H5iinjtP2MBObqE-QWqWP0IMN_rRqK9Y/view?usp=sharing
2. 20190928: fixed charger, home button: https://drive.google.com/file/d/1bog0dKKJ17eXa7vgu9cB0K1U8XWTqBzb/view?usp=sharing
1. 20190926: https://drive.google.com/file/d/1Inx1A-6VNqtJJhTO3rmodKL2tiS1x8LH/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 10.0
Root
Install latest magisk from canary channel (version 20.1+): https://forum.xda-developers.com/apps/magisk/dev-magisk-canary-channel-bleeding-edge-t3839337
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxllte and https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxllte and https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to LineageOS team
XDA:DevDB Information
[ROM][SM-T580][SM-T585][UNOFFICIAL] Lineage 17.0 | Android 10 Q | 64bit, ROM for the Samsung Galaxy Tab A series
Contributors
Valera1978, Valera1978
ROM OS Version: Android 10
ROM Kernel: Linux 3.x
Based On: lineage
Version Information
Status: Beta
Created 2019-09-27
Last Updated 2019-09-27
Finally, I finished the first version of the new android q.
Initially I thought it would be an easy walk. But google in the new version made a huge amount of changes. And I spend about weeks to made something working.
I rebuild the config, wrote a library with sensors from scratch, there were big problems with wifi and sound. For the sound, I had to build a 32bit version to get the missing libraries.
hello how r u?
thx for your great works,
i always try your roms and you are the best
please is there any bugs for t585 before i try it?
and can u tell me how can i backup all of my phone with internal storage like norton ghost on windows pc?
can u tell me your telegram channel?
Hi, thanks for your great work.
I have installed and tested. For now this I have found:
- Magisk 19.3 and 19.4 do not work. Do not start the rom after installation.
- The battery percentage cannot be displayed in the status bar.
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
michaeljr10wv said:
Seems to work GREAT on the 580, the only problem i have is I cant use the home button to wake the tablet. I've tried to configure the buttons in setting but it doesn't work. Only the power button will wake it....
Click to expand...
Click to collapse
Same here thanks for rom Valera
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
lewmur said:
When my T580 boots, I get a message saying there is an internal error and to contact the manufacturer. I just ignore it and everything seems to work ok. That and the battery % are the only two nits I've come across so far.
Click to expand...
Click to collapse
I have that fault also with SM-T580 and in the Xiaomi Mi A1. It is a fault of Lineage. Just ignore it.
Clash Royale and Brawl Stars work great. The tablet is very fluid.
Great rom, first custom rome redirects the music via usb to my external dac without
extra app!!! Thanks for your great work Valera1978!
Thanks Valera
It works much smoother than stock and earlier aosp.
In addition to what the colleagues mentioned, it happens to me that in Google Chrome I open two tabs and restart the tablet
On the other hand with Firefox in a quick test of several tabs this did not happen.
Thank you for your spectacular work.
Thanks for the Android 10. Fast rom but some random reboot.
This rom look awsome, i will flash it when i will be able to unlock my tablet with the home button
Reboots
Updated to the 09/28 version. Have a problem with the tablet rebooting. I'm trying to use AZ Recorder to record streams from Tubi TV. Start AZ and then Chrome and try to load the Tubi site and the tablet reboots. Did the same thing on the earlier version.
New version 20190929. Hope random reboots now gone away. Was done set of fixes.
Checking few hrs, no any reboots.
Magisk 19.3 and 19.4 unsupported
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
Yes, checked a bit, magisk modifing init in the boot and somehow corrupt it and then on load init cann't get partitions information from dtb.
And internal su also not finished yet.
My primary phone is xiaomi mi9 - more then month I'm on android q and magisk 19.3 working great here.
I'll back to check magisk soon, I need root too.
Nuzza said:
Magisk 19.3 and 19.4 unsupported
Click to expand...
Click to collapse
I thought Android 10 you need the Magisk 19.5, still canary builds so might have some issues.
Github Tree
Zip File
You can give it a try if you want
Thanks, valera. But dont' work accelerator.
Keeps giving random errors on the sm-t580
Thanks for update. Random reboot go away. I found few bug. Accelerator and recent files display issue. Thanks
Related
AOSP - Android 6.0.1 - MOB31H
NO LONGER SUPPORTED
This is a pure build of AOSP Android 6.0 Marshmallow, the goal is to have a pure AOSP rom, so it is not the objective of this project to include any functionality that is not native to Android AOSP.
And to make the experience more consistent and simplify some issues related to Android Marshmallow, this ROM has a basic versions of Google Apps (Gapps) pre-installed, additional apps can be installed via Play Store.
Download:
ROM: http://forum.xda-developers.com/devdb/project/dl/?id=20977
Instructions:
Install TWRP (download here)
Boot into recovery and flash the ROM.
For Root flash SuperSU (download here)
Note: Systemless supersu will not work with our device. The latest official release that will work is 2.52, but any system based version will work.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
XDA:DevDB Information
AOSP Android 6.0 Marshmallow, ROM for the LG G Pad 8.3
Contributors
adrianom
Source Code: https://github.com/AdrianoMartins/
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.4.x
Based On: AOSP
Version Information
Status: Stable
Created 2015-10-29
Last Updated 2016-11-17
Changelog
2016-10-18:
Update to Android 6.0.1 Release 70 (MOB31H)
Fix audio output problem in specific apps
2016-09-17:
Update to Android 6.0.1 Release 66 (MOB31E)
Other minor changes in kernel and rom
2016-09-11:
Only a clean build
2016-08-04:
Update to Android 6.0.1 Release 61
2016-07-17:
Fix Skype error
Fix and optimization patchs
Build with new toolchain (optimization)
Fix audio and video bad quality (update adreno and audio blobs) - thanks to @Deltadroid
2016-07-08:
Update to Android 6.0.1 Release 52 (MOB30R)
2016-06-16:
Update Google Apps (fix 2016-06-12 error)
2016-06-12:
Revert 2016-05-05 file system and storage management changes
2016-06-10:
Update to Android 6.0.1_r46
2016-05-07:
Update Gapps and Fix Setup Wizard
2016-05-05:
Update to Android 6.0.1_r43
Internal updates and patches focused in file system and storage management
2016-03-25:
Update to Android 6.0.1_r17
Update kernel with some CAF patchs (should fix the forced unmount of sdcard)
2016-02-07:
Update to Android 6.0.1_r13
Build with a new toolchain (GCC 5.3 and cortex-a15 optimization)
Other minor changes to the kernel, framework and camera
2016-01-08:
Update to Android 6.0.1_r10
2015-12-22:
Fix Play Store apps displaying as incompatible
Fix exFAT mount Support (need test)
Add AOSP Camera and remove Google Camera due to problem in switch to video mode (can be install from Play Store)
2015-12-17:
Update to Android 6.0.1
Fix Camera HDR mode
Add exFAT mount Support (need test)
Other small updates and internal patches
2015-11-18:
Update Gapps and Fix Google Calendar Sync
Update Setup Wizard to Tablet Version
Remove some applications intended solely for phones.
2015-11-15:
Use OpenGapps as Gapps source
Wifi: re-add default country code (BR)
Tweak display gamma configuration
Other small or internal patches
2015-11-12:
Tweak Wifi Settings
Change Kernel Power Management (fix wifi drop on sleep mode and optimize power savings mode)
Other small or internal patches
2015-11-07:
Update/Rollback to Android 6.0.0_r5 (MRA58V): the r26 for now is only intent for Nexus 5x e 6p, and this was having some issue in other devices, including:
Microphone not be detected
High battery consumption
With the change to default release branch (and 6.0.0_r5) this problems was fix.
Update Adreno Driver (fix Antutu error)
Build with a 5.2 (ROM) and 4.9 (Kernel) Toolchain compile by me with A15/FPU optimization
Remove Exchange2 and AOSP Email (default to Gmail and Google Exchange version)
Update Gapps
Other small or internal patches (including sdcard)
2015-11-04:
Update to Android 6.0.0_r26 (MDB08M)
Optminizations
Build with UBER Toolchain 5.2 (ROM) and A15 optimized 4.9 (Kernel)
Enable Strict Aliasing, Krait Tunings, GCC Tunings, Graphite, A15/Neon-vfpv4 Optminizations
Kernel Update:
Enable dynamic wireless regulatory domain
Enable support for features that have been disabled in the first versions (BFQ, SIO, ZEN, INTELLIDEMAND and others)
Enable lcd color temperature calibration
2015-10-31:
Enable Offline Charger
Enable SD Card Adoptable Storage (and fix access problem)
Fix Native Tap To Wake Setting Option
Add Calendar Sync
Enable clear all recents button
Enable SystemUI Tuner
Cleanup duplicate ringtones/alarms
Update the default wallpaper
Show Optimizing app dialog on first boot
Other small or internal patches
2015-10-29:
First release
.
Download History
2016-09-17: http://forum.xda-developers.com/devd...t/dl/?id=20460
2016-09-11: http://forum.xda-developers.com/devdb/project/dl/?id=20358
2016-08-04: http://forum.xda-developers.com/devdb/project/dl/?id=19659
2016-07-17: http://forum.xda-developers.com/devdb/project/dl/?id=19369
2016-07-08: http://forum.xda-developers.com/devdb/project/dl/?id=19247
2016-06-16: http://forum.xda-developers.com/devdb/project/dl/?id=18909
2016-06-12: http://forum.xda-developers.com/devdb/project/dl/?id=18864
2016-06-10: http://forum.xda-developers.com/devdb/project/dl/?id=18842
2016-05-07: http://forum.xda-developers.com/devdb/project/dl/?id=18267
2016-05-05: http://forum.xda-developers.com/devdb/project/dl/?id=18239
2016-03-25: http://forum.xda-developers.com/devdb/project/dl/?id=17547
2016-02-07: http://forum.xda-developers.com/devdb/project/dl/?id=16689
2016-01-08: http://forum.xda-developers.com/devdb/project/dl/?id=16132
2015-12-22: http://forum.xda-developers.com/devdb/project/dl/?id=15825
2015-12-17: http://forum.xda-developers.com/devdb/project/dl/?id=15735
2015-11-18: http://forum.xda-developers.com/devdb/project/dl/?id=15277
2015-11-15: http://forum.xda-developers.com/devdb/project/dl/?id=15239
2015-11-12: https://www.androidfilehost.com/?fid=24269982086994042
2015-11-07: http://forum.xda-developers.com/devdb/project/dl/?id=15067&task=get
2015-11-04: https://www.androidfilehost.com/?fid=24269982086987956
2015-10-31: https://www.androidfilehost.com/?fid=24052804347851183
2015-10-29: https://www.androidfilehost.com/?fid=24052804347848935
.
To build from source:
Code:
repo init -u https://github.com/AdrianoMartins/aosp_manifest.git -b android-X (replace with desired version)
repo sync
. build/envsetup.sh
lunch aosp_v500-userdebug
make -j4 otapackage
Credits:
The kernel is base on @ckret, @Rick Roll and @fefifofum kernel source, with additional patches from all community.
The device repo is based on the @fefifofum source for CM with my changes to AOSP and Marshmallow.
.
...
great, Im gona try it, keep up the great work man, hats off !
Oh my days!!!!!!!!!!!gonna flash it and give feed back. Thank you
@adrianom
Thank you for MM sweetness for our G Pad. Downloading now. Will report back for any issues.
Does wifi have issues like on cm11/12 when download speed is not higher 50mbps
Okay i got a random RESTART during the first charge cycle of this rom.... Still a lot to test tho
takis said:
Okay i got a random RESTART during the first charge cycle of this rom.... Still a lot to test tho
Click to expand...
Click to collapse
In offline charge (powered off)? If so, it was not yet implemented and reboot to os is the standard.
It was while the device was on
So, what I just did:
- Full backup of apps with TB
- Download MM version and SuperSu 2.52
- Reboot into Recovery
- Wipe everything but data partition
- Install ROM
- Install SuperSu
- Reboot
- Restore all apps with TB
Wifi working, camera working, flawless victory so far !
regards, mistersixt
mistersixt said:
So, what I just did:
- Full backup of apps with TB
- Download MM version and SuperSu 2.52
- Reboot into Recovery
- Wipe everything but data partition
- Install ROM
- Install SuperSu
- Reboot
- Restore all apps with TB
Wifi working, camera working, flawless victory so far !
regards, mistersixt
Click to expand...
Click to collapse
Couldn't restore app with TB, had to it manually. Fortunately don't have a lot of apps.
One issue I have found is that apps are unable to detect my sd card but in MMs Settings sd card shows all fine and can even be able to browse.
I'm using sandisk class 10 64gb card. It was running all fine in previous 5.1.1 Aosp rom.
adrianom said:
In offline charge (powered off)? If so, it was not yet implemented and reboot to os is the standard.
Click to expand...
Click to collapse
i also exercised the device on reboots on your last lollipop rom.
20-80% everything is fine, then 80-95 ~7 reboots, I lately use twrp to charge.
so maybe not an MM specific issue.
i will flash MM tomorrow, if it happens again i will send a log
I have also tested most of the basic tablet functions if not all and they seem to work.... I have a feeling that only charge/reboot/storage problems will have to be fixed ....
Darkmasterhk said:
i also exercised the device on reboots on your last lollipop rom.
20-80% everything is fine, then 80-95 ~7 reboots, I lately use twrp to charge.
so maybe not an MM specific issue.
i will flash MM tomorrow, if it happens again i will send a log
Click to expand...
Click to collapse
This information is very important, this indicate that maybe is a heat alarm when the device reach this level.
One question, you are using the standard charger?
Test the Marshmallow version and if it occurs, report with a log, I'll check this.
adrianom said:
This information is very important, this indicate that maybe is a heat alarm when the device reach this level.
One question, you are using the standard charger?
Test the Marshmallow version and if it occurs, report with a log, I'll check this.
Click to expand...
Click to collapse
yes/no its the v3 edition shipped with my g4 but basically the same. (same power)
will try it with stock one tomorrow.
rshahzad17 said:
One issue I have found is that apps are unable to detect my sd card but in MMs Settings sd card shows all fine and can even be able to browse.
I'm using sandisk class 10 64gb card. It was running all fine in previous 5.1.1 Aosp rom.
Click to expand...
Click to collapse
Same here. Apps can't detect SD card.. But able to see and browse through settings. I have Sandisk 32GB Class 10 card.
Not a deal breaker to me.
This is only for SM-P605 (lt03lte)! Even loading an custom recovery will irreversible trigger Knox to 0x1!
LineageOS/CyanogenMod is a free, community built, aftermarket firmware distribution of Android 7.1 (Nougat), which is designed to increase performance and reliability over stock Android for your device.
Code:
#include <std_disclaimer.h>
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*
*/
LineageOS/CyanogenMod is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. You will need to provide your own Google Applications package (GApps). LineageOS/CyanogenMod does still include various hardware-specific code, which is also slowly being open-sourced anyway.
All the source code for LineageOS is available in the LineageOS GitHub repo. And if you would like to contribute to LineageOS, please visit Gerrit Code Review.
How to flash:
-Be sure you are on 5.1.1 Bootloader and Modem (Flash 5.1.1 firmware via Odin) !
-Flash TWRP (version 3.0.0-0 or newer recommended)
-Make Nandroid backup (optional)
-Wipe > Advanced Wipe > select data, system, ART/Dalvik Cache, Cache, Internal Storage > Swipe
-Install > select Lineage14.1 Zip > Swipe, optional: flash GAPPS, SU Addon (before rebooting!)
-Reboot
Please read full OP before posting or flashing anything. Please don't report any bugs, if you use Xposed, any mod or modified the system.
Please report no issues, if you
using the official builds (or others than mine)
flashed Xposed
or modified the system
What is working
Everything
No major issues/bugs
Download
Other Builds
GAPPS
Notes:
- If SIM is not detected/RIL not working, flash 5.1.1 firmware again!
- Enable root: flash SU Addon, Settings > About tablet > tap 5x at build number. Settings > Developer options > Root Access
- just ignore E: Unknown Command errors in TWRP
- Flash GAPPS before reboot first time after flash!
- If using MTP/PTP shows no files, please tap one more at transfer files in notifications
- If something not listed ist not working, please test it also with SELinux permissive (setenforce 0 via Terminal Emulator/ADB Shell or use SELinuxModeChanger)
Changelog:
20210320: Synced sources
20200913: Synced sources, added midi support, disabled 5 GHz AP
20200318: Synced sources
20200124: Synced sources, a few kernel changes
20191101: Synced sources, small changes
20190801: Synced sources, slightly higher volume on speaker and Headset, small changes
20190303: Synced sources,smaller changes
20181226: Synced sources, changed SEPolicy, updated HID driver, small changes
Older
--Lineage--
20181217: Synced sources
20181029: Synced sources, small changes
20180816: Synced sources
20180618: Synced sources (Security Patch Level 2018-05-05), switched to 2048 heap/hwui memory map, sepolicy
20180524: Security Patch Level 2018-05-05
20180424: Synced sources
20180326: Synced sources, small things
20180307: Synced sources, kernel security patches, a few things
20180124: Synced sources, removed libsecril and legacy sd symlink, kernel updates
20171205: Synced sources, RIL changes, implemented stylus gestures
20171026: Synced sources, fixed magnet cover, switched to source built CAF ril, some kernel changes
20170925: Synced sources, fixed camera, kernel updates, sepolicy updates
20170829: Synced sources, switched to msm8974-common kernel (with some changes for our device), CLOCK_BOOTTIME_ALARM support, some smaller changes (Note: Please flash boot.img from post #643 to fix camera!)
20170803: Fixed MpDecision
20170802: Synced sources, only activate button light if they are pressed, added missing low latency record (-->for Skype etc.), updated init and sepolicy, some small improvements and changes
20170723: Synced sources, grant proper unix permissions for netmgrd and rmt_storage, updated sepolicy and init, smaller changes
20170703: Synced sources, removed buggy timekeep (fixes wifi problem), RIL updated (fixes Autotimezone), disabled live display per default, some minor changes
20170626: Synced sources, switched to Sony Timekeep (experimental), added SamsungDoze, enabled sdcardfs, enabled CIFS/NFS, mac access fixed, some kernel changes
20170614: Synced sources (Android 7.1.2_r17), quiet "KERNEL IS NOT SEANDROID ENFORCING"
20170604: Synced sources, fixed a bunch of kernel leaks
20170518: Synced sources, Only expose su when daemon is running
20170507: Synced sources (android-7.1.2_r8, Jelly...), correct keylayout config, enabled volume wake settings, added missing liblight defines, fixed prefered network setting, fixed rotation problem
20170422: Synced sources (Android 7.1.2), F2FS support, changed keylayout again, some kernel changes, IR changes from Lineage, dex preopt (not prerooted, flash SU Addon)
20170320: Synced sources, prerooted again, enabled Miracast/WiDi overlay, added missing SEPolicys for s-pen third party apps
20170301 #2 : Fixed tethering/hotspot (not prerooted, flash SU Addon)
20170301 #1: Synced sources, improved macloader related stuff (not prerooted, flash SU Addon)
20170203: Synces sources, fixed telehony fc after Nandroid restore, enhanced off charging mode
20170126: Synces sources, enabled Blur, a few kernel changes
20170114: Synced sources (Android 7.1.1_r9)
20170104: Synced sources, removed some deprecated stuff (dhcpcd entries, legacy symlinks)
20161231: Synced sources, Bluetooth disabled per default, unknown sources enabled per default
20161227: Synced sources, first Lineage build
--CyanogenMod--
20161215: Synced sources (Android 7.1.1_r6), disable notification LED for now (until I find a better solution), switched to common IR/lights HAL, last build from CyanogenMod Sources
20161207: Synced sources (Android 7.1.1), reduced power consumption, add missing SELinux rule
20161202: Synced sources, fixed magnetic cover, fixed VOIP mic
20161128: Synced sources, fixed off charging Mode, changed keylayout: Menu button: menu, longpressmenu: splitscreen view, doubletaphome: recent Apps
20161115: Synced sources, fixed camcorder, mapped longpressmenu as menu
20161110: Synced sources, Setup Wizard fixed, updated SEPolicy
20163010: first xda release, sync with cm 14.1 sources
Credit: LineageOS/CyanogenMod Team, Maintainer and Valera1978
Kevin F. Haggerty, Paul Keith
Sources:
Device
Kernel
Kernel since 20170829
Vendor
XDA:DevDB Information
Unofficial LineageOS (CyanogenMod) 14.1 for SM-P605, ROM for the Samsung Galaxy Note 10.1 (2014 Edition)
Contributors
davidmueller13
Source Code: http://github.com/LineageOS
ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.4.x
ROM Firmware Required: 5.1.1 bootloader and modem
Based On: LineageOS
Version Information
Status: Stable
Created 2016-10-30
Last Updated 2020-09-17
FAQ - Frequently Asked Questions
FAQ
Please read before posting anything!
Will this work/can you make it work on P600/P601?
Short answer: No! Only SM-P605 is supported.
But there are other projects for your device. For P600 (n1awifi) you can just download the latest official nightly.
Can you add xy feature?
It is and will stay a build straight from LineageOS sources, not a fork, so no. And also afaik there is no feature request way for LineageOS atm.
My SIM card is not recognized. What can I do?
As RIL blobs are from 5.1.1 firmware package, you need to be on modem from 5.1.1 firmware. The easiest way: just get an firmware package from Sammobile, Updato... and flash it via Odin. If it's still not working after that, do the same again (sometimes this is necessary).
Something is not working (correctly) / I found a bug? What should I do?
Make sure there are no potential courses for that issue like installed Xposed or system modifications. Also look, if it's listed in the OP or somebody already mentioned it. If not, just post about it and all information about it you have (circumstances, steps to reproduce it...).
Of course only for my builds you found in that thread, not for other/offical builds.
Amazing work!
Running your 10-27 build since yesterday night and working great so far on my T-Mobile P-607T.
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar.
That's purely cosmetic, the build is fast and stable. Weather location service works, have not tested GPS
nav yet.
Setup wizard worked for me on the 10-27 build.
Will download and test this build.
Thanks for keep supporting the Note 10.1 2014.
Thanks
Thanks for making this sweet build. Everything works well on my P607-TM except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
iandy1 said:
Only thing noticed so far are that can not change the battery style and display battery % on the statusbar..
Click to expand...
Click to collapse
Yes, some stuff for that is not fully ported and implemented yet.
iandy1 said:
Setup wizard worked for me on the 10-27 build.
Click to expand...
Click to collapse
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
temijun said:
except for the fact that it thinks the SIM card is not inserted. I came from a aosp 6.0.1 build and did an advanced format of everything except for external SD card. I tried formatting a few times and reinstalling a few times with no luck.
Click to expand...
Click to collapse
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Yeah you're absolutely right about the radio firmware once I upgraded baseband from P607TUVUBOI2 to P607TUVSBPH1 and reflash everything works as expected! thanks again for this awesome rom!
davidmueller13 said:
Yes, some stuff for that is not fully ported and implemented yet.
Thats the SetupWizard App, that comes with GAPPS. I had to remove the CyanogenMod SetupWizard, because of a FC while Wifi Setup. (I think, it uses the deprecated SETUP_WIFI_NETWORK.)
Make sure, you are on the latest modem (e.g. by flashing latest firmware).
Also an LogCat would be useful (How to do this).
Click to expand...
Click to collapse
firmware is very smooth, but
- Sometimes crash settings app
- Does not work the microphone during a call through Skype
Does this version fix the bug that I saw with rotation?
Edit. Isn't a bug. Settings disabled rotation for certain orientation by default. Need fix by changing in settings.
it cant read my sim
Does it support exfat or ntfs file system with write rights?
great rom..sometimes a little bit stuttering, but finally great to have 7.1
how do you use your stylus? do u have a special app for that?
Thank you again
ameenkhaled said:
it cant read my sim
Click to expand...
Click to collapse
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Hooray! One more of my devices could hop on CM14.x! I think imma start building myself starting next month...
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Sent from Google Nexus 6P @ CM13
AndyYan said:
Are MTP and ADB connections working too? Those aren't present in official CM13 nightlies and are the most irritating I found in them.
Click to expand...
Click to collapse
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
temijun said:
I flashed back to the default TMobile P607TUVUBOI2 firmware and then did an internal update to P607TUVSBPH1 which updated the radio baseband. This solved the missing SIM issue for me.
Click to expand...
Click to collapse
Does PH1 update the baseband? I extracted modem.bin from PH1 tar and flashed, and later flashed the whole PH1 package from Odin, but baseband stays at OI2...
Sent from Google Nexus 6P @ CM13
---------- Post added at 05:38 PM ---------- Previous post was at 05:37 PM ----------
davidmueller13 said:
Yes, they work.
In the CM13 Nighlys the kernel driver for MTP is failing. If you want to fix/add some things to your CM13 Builds:
Fix camera failing while SELinux Enforcing: http://review.cyanogenmod.org/#/c/165576/
Fix MTP-driver: https://github.com/davidmueller13/k...mmit/4785cabeb9047e8d9e5e19e3f3f5c4f4e3a59ceb
enable adoptable storage: https://github.com/davidmueller13/d...mmit/5ed5e71080c366e3e35ee23f032b86da74db2dba
And if you want to build CM14, it's important that you know that i use the common graphic binaries:
https://github.com/TheMuppets/proprietary_vendor_qcom_binaries
Click to expand...
Click to collapse
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Sent from Google Nexus 6P @ CM13
AndyYan said:
Do the patches works for TWRP too? Last I recalled TWRP also doesn't have ADB/MTP, if those could fix it I might consider syncing TWRP and do a patched build...
Click to expand...
Click to collapse
I think, it's the same issue. If you want to build TWRP you should use a OmniROM source tree (i change the device tree for that a bit :https://github.com/davidmueller13/device_lt03lte_nougat/tree/omni ).
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Yes, that is normal. I don't know how to fix it myself without gravitybox. That option won't work because 7.0/7.1 has no xposed support yet.
Sent from my LG-H850 using XDA-Developers mobile app
Cirno5 said:
Is it common that the menu button calls up the recent apps?
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Manually edit the .kl file in /system/usr/keylayout (can't remember which, but should be obvious).
Sent from Google Nexus 6P @ CM13
Cirno5 said:
I tried editing it in options but no matter if short press or long press are changed to any option available it still uses recent apps.
Click to expand...
Click to collapse
Change in sec_touchscreen.kl in system/usr/keylayout "APP_SWITCH VIRTUAL" to "MENU VIRTUAL".
I think, i will change it in the next build and set the app switch to "long press home" and disable "double tap home".
Good news for camcorder: I fixed recording, but we have to wait for some changes in CM14.1. But at least it works for our device finally in CM13.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup.
Instructions
1. Install latest TWRP
2. Download the zip(s) - firmware and Google Apps additional package (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and gapps
Work
almost all
Known Issues
-
LineageOS Builds
Code:
few notes about 20190316 update:
1. New kernel, our is very old 3.18.14, new one is 3.18.91. this is latest M105FDDU1ASB2 from relative exynos7870
2. Our wifi driver depends on the kernel. I can't just take a new kernel (or update the current one), it will most likely cause a kernel panic with the current wifi module. For some reason, samsung cut out the wifi sources/config from kernel. So I spent a week and was able to add the source of the wifi driver to the kernel and made a config for it. As result we can forgot about stand alone .ko wifi module, now it's part of kernel. And as bonus: our old wifi module's version is: 4.0.10.205Y_0903, new one is: 4.0.11.213X
3. I reviewed the defconfigs, make it similar to m10 from latest kernel, updated the file systems config (thanks to [user=5480152]@followmsi[/user]), activated pie sdcardfs sources, fixed vibrator for T585 (it was big misunderstand with dtb blocks)
4. I fixed the build logic of the dtb part (now it's part of defconfig)
5. I added doze service (power consumption)
6. I added fingerprint from xiaomi sagit (for pass safetynet check in Magisk, thanks [user=5480152]@followmsi[/user])
Code:
few notes about 20181223 update:
1. rebrand wifi, now it is loaded during the run of the wifi service, and not in init scripts, as before
2. made small updates in hwc for smooth gui
3. fixed gps for T585, may be it's quite slow, but working
4. fixed hostap for T585 (it's still buggy and sometimes turn on not from first attempt, but working)
Code:
few notes about 20181204 update:
this is huge update, a lot of changes here:
1. update for hew hardware support, now we use proprietary files from latest 8.1
- new mali driver r22 (early was old r15 version)
- new camera (new with exynoscamera3, it was missed for our tablets in 7.0)
- new OMX libs
2. latest official kernel (I asked samsung about sources few weeks ago)
- with new r22 mali support
- with new wifi driver
3. now with new hardware almost no any shims (only one missed symbol for camera), now no any shims for OMX with libui and etc
P.s. thanks [user=5480152]@followmsi[/user] for some fixes and hints.
SM-T580
17. 20191211: december security patch: https://drive.google.com/file/d/1gkEA0A7VH0DGIvI2yJWYWSwyfCbXdTn3/view?usp=sharing
16. 20191113: november security patch: https://drive.google.com/file/d/1xt8L8C8WuhEzA8x4mHyErzrmq3Ylm8Qr/view?usp=sharing
15. 20191023: october security patch: https://drive.google.com/file/d/17zVXccAuJV-Ojyh8gJBJBG6oM-IqnZ_7/view?usp=sharing
14. 20190911: fix front camera, september security patch: https://drive.google.com/file/d/1RkzvX9FE3ilut01OBSgOFP45JgICzcVl/view?usp=sharing
13. 20190811: august security patch: https://drive.google.com/file/d/16-7M4rc0q-IzCVUnTaSy9wwEOJZG6Zdg/view?usp=sharing
12. 20190707: july security patch: https://drive.google.com/file/d/1CkiJjWDfY1pq5KcF_kCNUQtqAA6n6ouw/view?usp=sharing
11. 20190518: update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/1v33yHO7zBi0UCswqZaB7vj1aYJvCtvq0/view?usp=sharing
10. 20190331: another test version: wifi driver from codeaurora, correspond to our stock 4.0.10.205 version, update wifi\bt drivers and configs, remove mobicore, 3.18.137 kernel with OC (thanks @followmsi), update interfaces (health, trust, netd, composer, mapper) to new versions: https://drive.google.com/file/d/1m77GggfDTINHqxaXxzTrR0MMsThnO_ni/view?usp=sharing
9. 20190320: fix flip: https://drive.google.com/file/d/1WO1tAx8wyMJim-07Z3oaea6YWiuwZmmo/view?usp=sharing
8. 20190319: fix flip: https://drive.google.com/file/d/18tcp3h7Eh06OAPWnWTAJQqgtTo0e58rg/view?usp=sharing
7. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/1Kf42kG8dnK7lxwBKXr2SjVvyqmH6bzZC/view?usp=sharing
6. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1p9rQWrHg-icHdm94g1PohaeOzwoDZhOs
5. 20190126: https://drive.google.com/file/d/1cqt_kSSjDzkDETpVhuyzkCF9EMVo5oDd/view?usp=sharing
4. 20181223: https://drive.google.com/file/d/1fWRfB3kl2vAnCwUEVzRPGOysm7Vs594k/view?usp=sharing
3. 20181204: https://drive.google.com/file/d/1xI_H5HP9gS1iL8femUaw5UltHzBrCkae/view?usp=sharing
2. 20181027: https://drive.google.com/file/d/1EAGuOUcL5Rw6_E5ZPGurRo9NYVx9dgNy/view?usp=sharing
1. 20180920: https://drive.google.com/file/d/1BFxGIqJKb0VYyaPyq9ejhWBHIOcfJ7kN/view?usp=sharing
SM-T585
15. 20191211: december security patch: https://drive.google.com/file/d/1-SjMSP6fhk8XsQ1IBZj1I2psKLaZT55Y/view?usp=sharing
14. 20191113: november security patch: https://drive.google.com/file/d/1E8KZdoXWXyZU8xop3OtdZISCX6v5fmnd/view?usp=sharing
13. 20191023: october security patch: https://drive.google.com/file/d/1o5EiqTDawP_cZYEMHKePxEGsLONw5iSh/view?usp=sharing
12. 20190911: fix front camera, september security patch: https://drive.google.com/file/d/1cz4ThdAxVFfnbk9-1rHbUd0_ue9RHOb5/view?usp=sharing
11. 20190811: august security patch: https://drive.google.com/file/d/1tY8WNyVkqS7cCeP82H8SF0n-QTlZVZtt/view?usp=sharing
10. 20190707: july security patch: https://drive.google.com/file/d/1HZoLhDRrOTU2I2a1walYPbhg35CVJCvp/view?usp=sharing
9. 20190518: update wifi driver (4.0.10.206A_20181017): https://drive.google.com/file/d/1zPZM0Z9ItaZgfiZd13x4zT495L5LP5ux/view?usp=sharing
8. 20190331: another test version: wifi driver from codeaurora, correspond to our stock 4.0.10.205 version, update wifi\bt drivers and configs, remove mobicore, 3.18.137 kernel with OC (thanks @followmsi), update interfaces (health, trust, netd, composer, mapper) to new versions: https://drive.google.com/file/d/16JdWMFQLFj1lsTZ1LcJkS-B_suHQUDmJ/view?usp=sharing
7. 20190320: fix flip: https://drive.google.com/file/d/1NgVwKv_58nzO_HnPIOzPE_iCqhl9XbH1/view?usp=sharing
6. 20190319: fix flip, access point, gps: https://drive.google.com/file/d/1Qr62AXurpt97UyNMz8Po8eYauiFQDuJJ/view?usp=sharing
5. 20190316: test version with huge update (but it look very stable): fix vibrator, new kernel, new defconfig, new wifi driver, doze (see notes): https://drive.google.com/file/d/1tk2hEe0yo4Bi9TdXVELEJr71vwl5AhE8/view?usp=sharing
4. 20190208: security patch level - february 5, 2019: https://drive.google.com/open?id=1StiJuRDl5DMERHOhkpxKfJvrGRgay2tH
3. 20190126: https://drive.google.com/file/d/1pEpEtf0vf9AUNtrkhXHilE0QO9okboIi/view?usp=sharing
2. 20181223: https://drive.google.com/file/d/1bYv4SpBAnXHr6Q7xw7CX2eCLicI-WUKm/view?usp=sharing
1. 20181204: https://drive.google.com/file/d/1FQL9SRNqHFOozlcJfSDs96VW344tTl3f/view?usp=sharing
Gapps
https://opengapps.org
Platform: ARM64
Android: 9.0
Variant: any
Root
Install official Magisk. if Magisk Manager missed in apps - install Magisk Manager apk
TWRP
official twrp:
SM-T580: https://twrp.me/samsung/samsunggalaxytaba101wifi2016.html
SM-T585: https://twrp.me/samsung/samsunggalaxytaba101lte2016.html
Sources
Sources: https://github.com/Lineageos
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Device: https://github.com/Valera1978/android_device_samsung_gtaxlwifi
Vendor: https://github.com/Valera1978/android_vendor_samsung_gtaxlwifi
Thanks
Thanks to LineageOS team
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Can you release this for the T350?
Valera1978 said:
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Click to expand...
Click to collapse
I can't wait for 585!!!
Does 3.5 jack works on this rom?
I am asking this because it was dead on 64-bit treble Oreo/Pie and it was not mentioned in bugs section too.
tank0412 said:
Does 3.5 jack works on this rom?
I am asking this because it was dead on 64-bit treble Oreo/Pie and it was not mentioned in bugs section too.
Click to expand...
Click to collapse
The connection works, have tested.
Is the pie guesture navbar avaliable?
Cast not working
Good work.:good: Seems to work well. But, as with every other 64bit ROM I've tried, casting to a regular Chromecast dongle just gives a black screen and no audio. People with a Chromecast Ultra dongle tell me theirs works, but I'm retired and living on SS, so I'm not going to spend for a new dongle when it works fine in 32bit RR Oreo.
Since this seems to be a problem with all 64bit ROMs, and not just this one, I guess I'll just have to wait until it's fixed somewhere up the line.:crying:
Nice work! Would it be possible to get the pie gestures or navbar customization options added in the settings?
Currently the dark or black theme for the UI doesn't work.
As for the Chromecast problem that Lewmur is reporting as not working: can anybody confirm this? For me it is rather vital it works.
And what is actually meant by the "FC problem" with the camera. Does it just mean it is "f*cked up" or what ?
Thanks...
Valera1978 said:
Right now I have only the SM-T580. Soon will back my SM-T585 and I will then make Lineage 16.0 for SM-T585 too.
Click to expand...
Click to collapse
Really looking forward for that build. Will try it as soon as released on my T585.
I tried "Cast" with my Microsoft Wireless Display Adapter - does not work Seems to be the same than with the Android dongles.
Will this work on the P580, just without the ability to use the pen? I don't frequently use or even really like the pen anyway, so I'm fine with that, I bought the S-Pen version for the extra gig of RAM.
Good Rom, thanx. But for me GPS not working. Can you fix it please.
I have installed the Rom for a few days ago.
It's works fine and the battery is okay.
But, I have found 2 Problems / fails.
1. I can not wake up the tablet with the homebutton.
2. the Displays goes short black, when I turn it from vertical to horizontal.
Sorry for my english
AlbertHB said:
I have installed the Rom for a few days ago.
It's works fine and the battery is okay.
But, I have found 2 Problems / fails.
1. I can not wake up the tablet with the homebutton.
2. the Displays goes short black, when I turn it from vertical to horizontal.
Sorry for my english
Click to expand...
Click to collapse
Those to are lineage related i think.
Installed it on my sm-t580 and works perfekt.
Gesendet von meinem HTC U11 mit Tapatalk
Keep getting an error:7 in twrp when I go to flash the rom. Any suggestions? Also any alternate links to d/l file from?
arachniac1 said:
Keep getting an error:7 in twrp when I go to flash the rom.
Click to expand...
Click to collapse
Hi,
error 7 means (AFAIK) that the image does not fit the model of your device.
Do you have the SM-T580?
Yes, I have the Samsung tab a SM-T580 (2016) wifi gtaxlwifi. Do you think I need a different version of twrp?
About LineageOS
LineageOS is a free, community-built, aftermarket firmware distribution of Android 10.0 (Ten) which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS GitHub repo and if you would like to contribute to LineageOS, please visit our Gerrit Code Review.
Official LineageOS website
Downloads Links
begonia | begoniain
Google Applications (optional) :
OpenGapps (Use packages for ARM64, Android 10.0, Nano)
Information: Flash the GApps before the first boot. If not, a clean flash is recommended.
Flashing and updating
LineageOS clean install :
- Boot into the LineageOS recovery.
- Format data and install the latest LineageOS build
- Install OpenGAPPS package, if you want GAPPS otherwise skip this step
- Wipe Dalvik/Cache and Reboot into System
About the builds
- Device Side Sources are on official org
Issues and reports
- Report issues only if you use the ROM kernel
- If an additional mod is installed, make sure it's unrelated, and mention it
- Make sure the issue wasn't discussed earlier in the threads
- Share a log of the error and steps to reproduce it
You can also join and help me debug your issues in the following Telegram Group: https://t.me/xiaomi_begonia | Not required but donations are welcome: Paypal
XDA:DevDB Information
LineageOS-17.1, ROM for the Redmi Note 8 Pro
Contributors
TheImpulson
Source Code: https://github.com/LineageOS/android_kernel_xiaomi_mt6785
ROM OS Version: Android 10
ROM Kernel: Linux 4.x
Based On: AOSP
Version Information
Status: Stable
Current Stable Version: 17.1
Stable Release Date: 2020-08-11
Created 2020-03-26
Last Updated 2020-08-12
Current Bugs include:
The camera doesn't have full resolutions support yet
SELinux is Permissive
Don't report bugs related:
to CTS failures (LineageOS does not tamper with CTS results)
with Magisk (It sets a number of props on boot like changing build type to the user resulting in broken adb root etc)
with Custom Kernel, MODs (Report that to MOD maintainer)
with non-recommended vendor or builds (Use what is told in instructions)
Reserved
Reserved
Amazing to see this around. Thanks for your hard work. Will probably play around with this for a while
This rom willl be good for daily driver?
L1nx99 said:
This rom willl be good for daily driver?
Click to expand...
Click to collapse
Please, it's just 3 posts above, read. See BUGS and decide if this can be a daily driver for you.
For ME, when Wifi is fixed, it will be a daily driver. And I will wait patientily until then, helping the dev whenever I can testing releases.
wifi working fine
Reserved !
Is USB tethering work?
when NFC will be working ?
Is it even possible for NFC to make it to working?
Ask it another time in the same page please. If it was possible it would've been done already. Probably working on it, figuring out how to do it or just busy with other stuff. Be patient and be glad that some of these devs are working in this device.
korbielow said:
when NFC will be working ?
Click to expand...
Click to collapse
Asking for ETA is against XDA forum rules and disrespectful to the developer.
It will be done when it's done. If you can't wait, use stock.
I must downgrade Android 10 to 9,to be able to flash this ROM,or any other?
tze_vitamin said:
I must downgrade Android 10 to 9,to be able to flash this ROM,or any other?
Click to expand...
Click to collapse
If you are on MIUI 11 - Android 10, you WILL need to downgrade to Android 9! This method will not work if you're on Android 10. Use MiFlashPro or fastboot to flash all partitions to a compatible MIUI 10 or 11 Android 9 build.
copypasta from megathread.
L1nx99 said:
This rom willl be good for daily driver?
Click to expand...
Click to collapse
L1nx99 said:
Is USB tethering work?
Click to expand...
Click to collapse
korbielow said:
when NFC will be working ?
Click to expand...
Click to collapse
Pushed a new update on GitHub Releases. Here is the changelog:
- Updated safe media volume warning level
- Hided sRGB toggle in developer options
- Fixed Ambient display and enabled Always on Display
- Fixed brightness issues by importing overlays from Google Pixel (marlin)
- Added Trust Hal, see it in Privacy Settings
- Enable option for full-screen aspect ratio
- Added notch overlay, this makes center clock and network speed indicator unavailable as they are unsupported with notched devices
- Added led notification and battery led customization options, see it in Notifications settings
- Turned on WiFi MAC randomization
- Hex-edited MTK RIL lib to fix incoming calls
- Upstreamed kernel to v4.14.158
The hotspot is also working, however, it's buggy. You need to remove SIM cards to make it work. That will be fixed in future builds (hopefully).
TheImpulson said:
Pushed a new update on GitHub Releases. Here is the changelog:
- Updated safe media volume warning level
- Hided sRGB toggle in developer options
- Fixed Ambient display and enabled Always on Display
- Fixed brightness issues by importing overlays from Google Pixel (marlin)
- Added Trust Hal, see it in Privacy Settings
- Enable option for full-screen aspect ratio
- Added notch overlay, this makes center clock and network speed indicator unavailable as they are unsupported with notched devices
- Added led notification and battery led customization options, see it in Notifications settings
- Turned on WiFi MAC randomization
- Hex-edited MTK RIL lib to fix incoming calls
- Upstreamed kernel to v4.14.158
The hotspot is also working, however, it's buggy. You need to remove SIM cards to make it work. That will be fixed in future builds (hopefully).
Click to expand...
Click to collapse
Thank you for the update!
video bug in instagram,whatsapp,facebook etc
LineageOS 20.0 64-bit for Samsung Galaxy Tab A 10.5 (2018) WiFi
Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about features included in this ROM before flashing it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.
Click to expand...
Click to collapse
By using this ROM, you acknowledge that you understand what running work-in-progress software means. You might lose all your data stored on the device due to a bug, the device might freeze / crash at any time, nothing is guaranteed; you are basically a beta tester. Also, this is my personal project which I decided to share here, I'm not a developer but an average user like you. Most likely I can't and will not solve your issues with VoLTE not working, Angry Birds crashing, etc.
Installation:
-----
Notes for SM-T595 users
The ROM has been modified to work on the LTE variant too, with the same level of functionality as the WiFi-only variant. This means that the LTE modem will not be usable in this ROM, and the device will appear as SM-T590 everywhere.
Also, SM-T595 has lots of hardware versions with different partition sizes, so there is a possibility that the installer will fail with one of the following error messages: E1001: Failed to update system image / E2001: Failed to update vendor image.
In case it fails, I will need the output of the following commands to make the installer compatible with that specific version too:
adb shell blockdev --getsize64 /dev/block/by-name/system
adb shell blockdev --getsize64 /dev/block/by-name/vendor
-----
- Reboot the tablet in download mode
- Flash TWRP in the AP slot using Odin
- Right after Odin finished flashing, hold Volume Up while the tablet is rebooting to get into TWRP
- Skip the warning by swiping to allow modifications
- Wipe -> Format Data -> type yes and confirm
- Reboot -> Recovery
- Skip the warning again
- On your PC, open a command prompt and copy LineageOS to the device using adb push lineage-20.0-20230514-UNOFFICIAL-gta2xlwifi.zip /sdcard/
- Alternatively, you can use a Micro SD card or USB OTG, MTP isn't recommended- In TWRP, select Install -> lineage-20.0-20230514-UNOFFICIAL-gta2xlwifi.zip and swipe to confirm
- Optionally, you can install Magisk now, make sure to use the latest version from GitHub
- Optionally, you can install GApps now but Aurora Store with MicroG is a better alternative, they use way less RAM than Play Services
Downloads:
LineageOS 20.0:
https://github.com/UDPSendToFailed/OTA/releases
TWRP 3.7.0:
https://github.com/UDPSendToFailed/twrp_device_samsung_gta2xlwifi/releases
Changelog:
2023. 05. 14.
Edit: Not recommended to download. This build has issues with WiFi after reboot because of the in-kernel WLAN driver change which I did as an attempt to fix the randomly occurring kernel panics. As it turned out, the WLAN kernel driver has nothing to do with the random reboots, so I will revert to the previous configuration in the next build.
- Switched to in-kernel WLAN driver
- Synced with the latest LineageOS sources (https://review.lineageos.org/q/branch:lineage-20.0+status:merged+after:2023-04-17+before:2023-05-14)
- May security patch
Spoiler: More changelogs...
2023. 04. 17.
- Synced with the latest LineageOS sources (https://review.lineageos.org/q/branch:lineage-20.0+status:merged+after:2023-04-05+before:2023-04-17)
- April security patch
2023. 04. 05.
- Synced with the latest LineageOS sources (https://review.lineageos.org/q/branch:lineage-20.0+status:merged+after:2023-02-27+before:2023-04-05)
- Switched to LineageOS-UL for frameworks_av and frameworks_base
- March security patch
2023. 02. 27.
- Synced with the latest LineageOS sources (https://review.lineageos.org/q/branch:lineage-20.0+status:merged+after:2023-01-24+before:2023-02-27)
- February security patch
2023. 01. 24.
- Synced with the latest LineageOS sources (https://review.lineageos.org/q/branch:lineage-20.0+status:merged+after:2022-12-28+before:2023-01-24)
- January security patch
2022. 12. 29.
- Synced with the latest LineageOS sources
- December security patch
2022. 11. 15.
- Synced with the latest LineageOS sources
- November security patch
2022. 10. 05.
-----
!TWRP update and data wipe is required to enable FBE!
Steps to update from previous versions:
- Download TWRP 3.7.0
- Update TWRP using Odin
- Boot into TWRP -> Wipe -> Format Data -> type yes and confirm
- Reboot -> Recovery
- Flash the latest ROM zip (20221005)
-----
- Enabled FBE (File-Based Encryption)
- Fixed some Bluetooth-related issues
- New camera app with video recording support
- Synced with the latest LineageOS sources, most of the features from 19.1 have been merged
- October security patch
- TWRP: Updated to the latest 12.1 branch
- TWRP: FBE decryption support
2022. 09. 30.
-----
LineageOS 19.1 (Android 12L) builds are now discontinued as it would be complicated to keep testing an older version, and I don't have a build server to store and update the source code either. Personal builds can still be done by anyone who wants to keep using 19.1, all the required sources are available on my GitHub.
-----
- Added Signature Spoofing support, LSPosed and FakeGApps aren't required anymore for MicroG
- Added Natural and Boosted display color profiles
- Extended Night Light color temperature range
- UI and color flickering has been fixed
- The Restrict USB option under Settings -> Privacy -> Trust is now working properly
2022. 09. 16.
- Significantly improved multitasking performance with proper ZRAM setup
(Random reboots might still happen, please report them with a description of what caused the crash and /proc/last_kmsg & logcat output attached)
- Added KTweak script (more info here and here)
- Added Dolby Settings
- Added Memory Usage stats to App Info in Settings
- Added audioloader
(Experimental quad speaker mode, can be enabled with running audioloader in Terminal Emulator or adb shell. To revert the temporarily set parameter, restart the tablet. Ideas on how to fix the sound quality are welcome)
- Fixed Network Speed indicator and Data Usage stats
- Disabled ALAC codec support as it had a critical CVE vulnerability
- Reverted to SkiaGL renderer as SkiaVK had issues with WebView v104+
- Removed some LTE-only features
- September security patch
2022. 08. 14.
- Added System Navigation options under Settings -> System -> Gestures
- Added theme color customization under Settings -> Wallpaper & Style
- Merged changes from various msm8953-based device trees
- August security patch
2022. 07. 12.
- Added CRT screen off animation
- Added tinymix (in case anyone wants to experiment with fixing the quad speakers)
- Added hidden and protected apps feature to the launcher
- Added pure black theme option
- Light theme changes
- Removed Audible app (Samsung bloatware from the odm partition)
- July security patch
2022. 06. 12.
- Headphone jack fixed
- Microphones fixed
- Double Tap to Wake should work reliably now
- Switched to Vulkan renderer to improve the smoothness of the UI
- June security patch
2022. 05. 29.
- MTP fixed
- Widevine DRM fixed
- Removed the "internal problem" warning on boot
- TWRP updated to 3.6.2
2022. 05. 25.
After a long time without updates, a new, non-GSI version is here!
- Freezes and crashes have been eliminated
- Keystore is fixed so you can use a screen lock
- This update will give your device an extra 106MB of RAM (by freeing up the memory that was allocated for the non-existent modem)
- MSM hotplug is enabled by default to improve the battery life by dynamically powering down cores based on CPU load
- May security patch
2022. 04. 08.
- Device type changed to tablet
- April security patch
Known issues:
- WiFi hotspot crashes
- Bluetooth audio
- 2 of 4 speakers are working
- GPS
- Freezes / crashes with some SD cards, in case the ROM installation fails with black screen or the setup process keeps freezing, try removing the SD card
- SELinux permissive
32-bit vs 64-bit mode performance comparison:
https://browser.geekbench.com/v5/cpu/compare/15116230?baseline=14600296
Thanks to:
lsswizard for the 64-bit kernel, this all wouldn't be possible without his work
lsswizard for the TWRP tree
@quent1du58 for the commits to the device tree
LineageOS team for the base ROM
LineageOS-UL team for keeping the camera HALv1 patches alive
Sources:
Kernel: 3.18.140
64-bit vendor libraries from Galaxy A20s firmware (A207FXXU2BUD4)
https://github.com/UDPSendToFailed/
https://github.com/LineageOS
https://github.com/LineageOS-UL
https://github.com/TeamWin/android_bootable_recovery
looking forward to see flashable zip for deleting keystore.mdfpp.so and keystore.msm8953.so from /vendor/lib/hw
aIecxs said:
looking forward to see flashable zip for deleting keystore.mdfpp.so and keystore.msm8953.so from /vendor/lib/hw
Click to expand...
Click to collapse
They are already removed from the provided vendor.img but sadly that didn't fix the problem, I will look for a solution.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Many thanks for all your work. My SM-T590 is running on it for almost a day now (with MicroG and Magisk). Installation was not straightforward (I've had to factory reset after flashing LineageOS since the setup process kept freezing), but definitely easier than with the other GSI images. Not really sure if it is also related to the 32 vs 64 bits kernel, but the tablet definitely feels snappier than with BloatUI OneUI.
I've found only three problems so far:
The tablet does indeed randomly freeze from time to time. It does seems related to Magisk, but definitely not a huge deal since it rarely happens. I'll try to pinpoint the problem with a logcat if I have some time.
Only half of the speakers are working (but still not a deal breaker).
My book cover does not wakes up or put the tablet into sleep. It seems that one of the sensors is not working properly.
quent1du58 said:
Many thanks for all your work. My SM-T590 is running on it for almost a day now (with MicroG and Magisk). Installation was not straightforward (I've had to factory reset after flashing LineageOS since the setup process kept freezing), but definitely easier than with the other GSI images. Not really sure if it is also related to the 32 vs 64 bits kernel, but the tablet definitely feels snappier than with BloatUI OneUI.
I've found only three problems so far:
The tablet does indeed randomly freeze from time to time. It does seems related to Magisk, but definitely not a huge deal since it rarely happens. I'll try to pinpoint the problem with a logcat if I have some time.
Only half of the speakers are working (but still not a deal breaker).
My book cover does not wakes up or put the tablet into sleep. It seems that one of the sensors is not working properly.
Click to expand...
Click to collapse
Thanks for the feedback!
I'm working on a non-GSI variant since I couldn't fix the keystore errors and other issues on GSI.
However I have no previous experience on Android builds, and our device has no custom ROMs or device trees to begin with, so it might take a long time to fix everything. Also the 3.18 kernel is really old for Android 12.
Currently basic functionality like WiFi, Bluetooth, OpenGL, sensors, and lock screen are working, but there is still a lot more left like DRM, cameras, audio, GPS, etc.
As for your 3rd issue, I would suggest enabling double tap to wake in Phh Treble Settings.
That's some great news. I've also tried to port LineageOS to this device (mostly as a way to learn new things, since Android/LineageOS/kernel aren't really my areas of expertise) using both Rupansh and heavily customised Xiaomi Redmi 5 (Rosy) sources trees without any success.
Have you managed to boot a non GSI build? I've tried to compile LineageOS 19 Using your device and kernel trees, plus Rupansh vendor tree. Build went fine, I've even managed to flash and to boot into recovery (which needs fstab fixes), but no way to boot a freshly flashed zip for now. I'm going to continue my research and will share any progress.
quent1du58 said:
Have you managed to boot a non GSI build? I've tried to compile LineageOS 19 Using your device and kernel trees, plus Rupansh vendor tree.
Click to expand...
Click to collapse
Yes, currently my tablet runs a build based on my device tree on GitHub but it's highly experimental. Basically I use GitHub only to have some revisions of the device tree for backup and testing purposes, that's why all the commits are named asd.
I guess your issue will be that you use vendor files from Rupansh (since that's missing 64-bit stuff from Galaxy A20s vendor), here I have uploaded the ones I'm using: https://mega.nz/folder/zXZzVZaL#95t8V7DSr0rX7W0lTZmhHQ
Copy them to a folder named ~/system_dump for example, create a subfolder named system and another subfolder named vendor under the previously created system folder. Then you can use the commands below to extract the required proprietary files from system.img and vendor.img. Assuming you have everything in ~/system_dump folder:
sudo mount -o loop,rw system.img system
sudo mount -o loop,rw vendor.img system/vendor
Then go to your downloaded LineageOS source/devices/samsung/gta2xlwifi and run:
chmod +x extract-files.sh
chmod +x setup-makefiles.sh
bash extract-files.sh ~/system_dump/
Also you will need to apply some patches to the LineageOS 19.1 source to bypass eBPF requirement which is not available on our 3.18 kernel. Download Treble patches from here: https://github.com/phhusson/treble_...ases/download/v413/patches-for-developers.zip
Apply patches/platform_system_bpf/0001-Support-no-bpf-usecase.patch to system/bpf and patches/platform_system_netd/0001-Support-no-bpf-usecase.patch to system/netd in the source using git apply /path/to/.patch. You can also apply the Camera2 API patches mentioned in the first post but the camera doesn't work anyway currently.
The resulting build is barely usable, working stuff are mentioned in my previous comment. Feel free to try different versions in device.mk and add / remove stuff in proprietary-files.txt, I guess I messed up lots of things since I never built a device tree before.
Thank you for all those details, I've managed to build a working image. I still experience the same problems so far:
UI crashes a lot shortly after rebooting
Inserting a SD card freezes the system
But since I now have a way to build my own releases, I'll try to fix things. Since I've forked your repositories on Github, I'll send you pull requests when needed.
Glad you managed to get it work!
Yep, the UI hangs and crashes are happening here too, haven't found the cause yet. Logcat shows a blocked state and dumps tons of lines from the kernel. The interesting part is that sometimes, like in 2 of 10 reboots it starts up correctly without any freezes.
If I have some time I will continue fixing the tree as there are lots of randomly added and unfinished stuff which I did for testing purposes.
I tried to flash twrp in the download mode but it showed "only official binaries are allowed to be flashed". What's wrong?
seeiu said:
I tried to flash twrp in the download mode but it showed "only official binaries are allowed to be flashed". What's wrong?
Click to expand...
Click to collapse
You need to flash TWRP using a patched version of odin.
Thanks for the great tutorial. The Rom runs so far quite well.
But when I want to flash microG_Installer_Revived with TWRP I get a 235 error.
When I connect the tab to the PC, the internal memory and SD card is not shown to me on the PC.
Although, the tab is recognized by the PC.
Is there a trick or do I have to live with it.
DerSammler said:
But when I want to flash microG_Installer_Revived with TWRP I get a 235 error.
Click to expand...
Click to collapse
I just updated the first post with some instructions about MicroG. Basically you will have to flash it as a Magisk module, also use FakeGApps to have Signature Spoofing support.
DerSammler said:
When I connect the tab to the PC, the internal memory and SD card is not shown to me on the PC.
Click to expand...
Click to collapse
Yea, that's a known issue with both GSI and non-GSI variants, it'll be fixed as I find the cause. Alternatively you can use adb or some wireless file transfer app like AirDroid.
What do I do if I want to go back to stock Rom?
Can I simply flash with Odin original Android 10? Or is there anything else I need to consider.
Thank you very much.
DerSammler said:
Can I simply flash with Odin original Android 10?
Click to expand...
Click to collapse
Exactly, it's enough to flash the latest stock ROM with Odin to revert the changes.
I have installed lineage-19.1-20220525-UNOFFICIAL-gta2xlwifi according to the new instructions
unfortunately, when I start the tab, I get a red message—kernel is not seandroid enforcing -.
Afterwards, when the tab is started, I also get the following message on the home screen
Android System
There is an internal problem with your device. Please contact the manufacturer regarding this.
Are these two messages normal? Or am I doing something wrong. I have now installed LOS_19.1_64 again. Thank you very much.
DerSammler said:
Are these two messages normal?
Click to expand...
Click to collapse
Yes, these messages are completely normal in the ROM's current state and can be ignored, they won't cause any further issues.
The kernel message is related to the SELinux permissive state which is listed under known issues, the other one shows up simply because I haven't patched the LineageOS source code to hide it.
Disable AVB check · phhusson/[email protected]
This avoids the message "There's an internal problem with your device. Contact your manufacturer for details." on some AVB 1.0 devices. Change-Id: Ia54b857a3e98e2639d6bcc0ba713809704...
github.com
Thanks a lot for your help.
I find the Rom really great, super work you do. The system is really faster.
To transfer data I have MyPhoneExplorer and that works very well with it.
I'm curious what there will be updates for this Rom.
Wish you a quiet Sunday.
Greetings: Dirk
DerSammler said:
I find the Rom really great, super work you do. The system is really faster.
Click to expand...
Click to collapse
Thanks for the feedback!
DerSammler said:
I'm curious what there will be updates for this Rom.
Click to expand...
Click to collapse
Yea, I'll try to improve things but as I stated in my previous posts, I'm just an average user with no Android porting experience, so it might take a while. I'll post new releases with monthly security updates from Google and maybe some fixes.
Also please note that the ROM isn't secure yet, the lock screen can be easily bypassed with TWRP since encryption isn't enforced, and adb with root access is enabled by default for debugging purposes.
I have a question about the GSI Roms?
Which roms can I flash on the Galaxy Tab A (T-590).
The roms must be Binder compatible, I know that.
Can I only flash Binder a64, or can I also use the Binder arm 64 Rom?
Thank you very much.