Related
I am trying to get Samsung Dive working on my phone but I think the rom developer removed some files since settings just crashes when attempting to turn it on, so I want to replace them.
According to a old list the four apks needed are
IMEITracker.apk
signin.apk
MobileTrackerEngineTwo.apk
syncmldm.apk
Of these the last two are still around on my rom but I can't find the first two anywhere even in the stock samsung LPQ firmware files which I extracted on my computer, so I assume they are depreceated.
Does anyone know what else I need to get Dive to work? I am unable to use any SMS controlled tracking software due to other software choices I have made so this is important to me.
I finally figured it out by doing a diff on the list of apks from the stock firmware and my chosen rom and getting a short list of removed apks led me to the only one that sounded like a option and it worked.
For anyone else looking I only had to replace Samsungservice.apk and Dive started working great.
mine.still does't work after i put the mobiletrackengine.apk and samsungservice.apk can you list what do you have in system/app
I've added those Samsung prerequisites but when I try to enable Remote Control the small popup comes and says: Register Google account first.
But I have already google account (and samsung account) in Accounts and sync.
Do you know what that means?
I used to have Samsung dive on gingerbread and it worked.
Hi guys,
As far as I know you need "SevenEngine.apk" & "SyncmlDM.apk". It took me ages to figure out.
I hope this helps
Ok, I've installed all apks you mentioned, then remove and add google and samsung account and it seems to work but I can't connect through samsung dive. I've tried with different internet connection..
Hi, I've the same error, I only have tu push samsungservices.apk and I can log in into my samsung account, but in samsungdive, no service can connect, nor location either call logs.
Can anyone upload these files?
Thanks!
thecrater said:
Hi guys,
As far as I know you need "SevenEngine.apk" & "SyncmlDM.apk". It took me ages to figure out.
I hope this helps
Click to expand...
Click to collapse
I've added these also and still no go.
Sent from my SGH-I777 using Tapatalk 2 Beta-5
Any further advancements on the requirements of what is needed to get tracking set up. I am making sure this works after my SGS1 got stolen. On SGS2 now with custom ROM, but went to the trouble of downloading stock firmware and deodexing entire ROM to make SURE this works.
Anyone know what the gingerbread mobiltrackerUI.apk did? I have included that in my ROM as well to see if that will make any difference?
That should be enough: https://www.wuala.com/wanam/v11.5/WanamLite.DXLP9.SamsungApps.zip/?key=G5G7NSyOYU5P
BTW. that is interesting if somebody has already lost his phone without enabled tracking https://play.google.com/store/apps/details?id=com.lookout.labs.planb&hl=en
dzid_ said:
That should be enough: https://www.wuala.com/wanam/v11.5/WanamLite.DXLP9.SamsungApps.zip/?key=G5G7NSyOYU5P
BTW. that is interesting if somebody has already lost his phone without enabled tracking https://play.google.com/store/apps/details?id=com.lookout.labs.planb&hl=en
Click to expand...
Click to collapse
Thanks, actually I have the original optus ROM and have deodexed it and have all packages from standard LP8 ROM and it still says I have to register my Google Account? I have gone on to dive......still no go? I want to enable remote control so I can eventually get the wiperreceiver.apk working from the Gingerbread ROM, if I have remote control working it won't take me long to get the app functioning on my phone I'll happily wipe my phone to test it lol, so long as I back up to ext SD card and pull the card from the phone and then test it
Jarmezrocks said:
Thanks, actually I have the original optus ROM and have deodexed it and have all packages from standard LP8 ROM and it still says I have to register my Google Account? I have gone on to dive......still no go? I want to enable remote control so I can eventually get the wiperreceiver.apk working from the Gingerbread ROM, if I have remote control working it won't take me long to get the app functioning on my phone I'll happily wipe my phone to test it lol, so long as I back up to ext SD card and pull the card from the phone and then test it
Click to expand...
Click to collapse
Did you manage to make this work on Custom ICS rom? Thanks
Has anyone been able to make this work?
I can see my phone on Samsung dive site but nothing work (ringing, tracking, locking).
Register google account first
Hello,
i'm using darkyROM and added all the apks mentioned here (related to samsung dive).
I can tick the option to notify when SIM card changed, but I am unable to tick the remote control option. When I try to enable it, is shows a notification stating "Register google account first".
Can somebody tell me what's wrong or list all the apks needed (the link on previous page (wuala.... ) is broken.
Thanks in advance!
dzid_ said:
That should be enough: https://www.wuala.com/wanam/v11.5/WanamLite.DXLP9.SamsungApps.zip/?key=G5G7NSyOYU5P
Click to expand...
Click to collapse
all you need
nitescucip said:
Hello,
i'm using darkyROM and added all the apks mentioned here (related to samsung dive).
I can tick the option to notify when SIM card changed, but I am unable to tick the remote control option. When I try to enable it, is shows a notification stating "Register google account first".
Can somebody tell me what's wrong or list all the apks needed (the link on previous page (wuala.... ) is broken.
Thanks in advance!
Click to expand...
Click to collapse
Hi
Look here at my post, that did the trick for me.
http://forum.xda-developers.com/showthread.php?p=26452378#post26452378
Hello,
I added all these files but the trick stil doesn't work for me. Any ideas?
Thanks in advance!
Regards,
Ciprian
Hi,
I'm new to this super-user thing and I'm sure I'll ask the same stupid questions all newbies ask. I just rooted my Samsung Galaxy S2 it's not the international model it it's the sphd -l710 I believe (Sprint) and I have the superuser app available but to change any of the settings is it true you need to download superuser elite because i thought just by rooting my device I would be able to change options on the phone such as speed, etc. What other options does rooting my phone give me access to. I know probably too many to list but to just give me an idea. Also if i say stopped paying my bill to sprint would i still be able to connect to wi-fi without sprint coverage. Any other information for a newbie that could help in me exploring my newly rooted galaxy s2 would be helpful. I mainly just rooted my device because I've heard that it gives you access to certain options sprint does not want you to have access to....Oh yea forgot to also ask, I guess now that I've rooted my phone I can disable the shutter sound of my camera if u could give me quick instructions on how to do that also it would be appreciated. I kno I'm a pain in the a** but thank you so much in advance for your patience and co-operation..
You don't need to touch superuser. Use titanium backup to remove apps and root explorer/some free version to access files, just make sure to select read/write option. Search in your system app data till you find the camera file and delete the sound file ****.ogg sorry i can't be more help, found this via Google while searching else, i just didn't see a reply so i thought I'd help.superuser elite is more of a"support the developer app "for now. Cheers mate
Finally on the same version as the chinese rom
http://www.flymeos.com/firmwarelist?modelId=10&type=1
[CHANGELOG]
[System]
Added the function of sliding up the floating call notification to mute the call;
Optimized the brightness adjustment;
Optimized system translations
[Communications]
Optimized the full-screen incoming call page;
Optimized the Talkback support of dialpad;
Optimized the dialpad which will stay unfolded when dialing;
Fixed the bug of no favorite contacts in DND white list and speed dial adding;
When edit a contact’s IM info, Hangouts would be the default label;
Added ‘3G only’ network type;
Fixed the occasional bug of unable to auto-match contact when typing numbers;
Fixed the bug of no transitioning animation when tap the dial icon;
Fixed the bug when two numbers have the same last 7 digits, the call logs will be merged as from one phone number;
Fixed the occasional blank list in Contacts;
[Camera]
Fixed the bug of blur preview page after shooting photos in manual mode;
Fixed the bug of when the sound effect of photo shooting is turned off, and the users switch to photo mode after using Video or Slo-mo modes, the sound effect still exists;
Fixed the bug of the camera being unable to focus and meter when shooting GIFs;
Fixed the clipping error in square mode;
Fixed the focusing issue;
Fixed the bug when using Macro mode after shooting a video, the camera cannot focus on the object;
Fixed the bug when the camera is activated by third-party apps, there is no OK and re-take button;
[Audio]
Fixed the unchanged volume bug when adjust the volume by a little bit;
[Security]
Fixed the issue of incomplete display of missed calls and unread messages on notification bar under Super mode in extra-large font;
[Home screen]
Now the icons and widgets can be moved directly in editing mode;
Added the function of allowing using emoji in app folder names;
Added a new feature which enables users to copy and paste the folder names on Home screen;
Optimized the notification position when editing the Home screen;
Fixed the occasional freezing issue;
[Settings]
Add password retrieving option to Vault of File Explorer and locked apps;
Optimized the app management page, the Downloaded option is changed to Installed;
Fixed the displaying abnormity in Battery;
Fixed the crash down issue when tap ‘APNs’ in ‘SIMs and networks’;
Fixed the crash down issue when tap on the encrypted apps under Guest mode;
[Power]
Changed the screen brightness in Super mode to smart adjustment;
[Messages]
Optimized the intro page of the group message naming feature;
Optimized the popup style of a message when holding by the user;
Fixed the bug of unable to restore default operation after tap on Restore icon in names editing page.
Fixed the problem of occasional mistakes in recognizing message cards;
[Notification bar]
Fixed the bug of the notifications which have been read would pop up again on notification bar;
[Gallery]
Fixed the blank area bug on the bottom bar when tap on a photo thumbnail to view it in full-size;
[Lock screen]
Optimized the color solution on lock screen so users can see the time on the screen clearly’
Changed the Camera activating method from Sliding leftwards to sliding upwards;
[File Explorer]
Remarked folder names will be displayed preferably for folders in Pictures;
[Download]
Reconstructed download page where MD5 calculating feature is removed and the launching speed is optimized;
By default, Download app will allow downloading only under WLAN;
[Quick share]
Data-free quick share: Optimized sharing experience, added visible managing page;
[WLAN]
Added network speed testing and diagnosing features, users now can view or test the current network speed and status;
Mine is on 5.1.5.0A (purchased from mainland China, the Public version instead of China Union version). Can it flash directly to 5.1.5.0G? Thanks!
scott4 said:
Mine is on 5.1.5.0A (purchased from mainland China, the Public version instead of China Union version). Can it flash directly to 5.1.5.0G? Thanks!
Click to expand...
Click to collapse
No, you must follow this tutorial :
http://forum.xda-developers.com/meizu-pro-5/how-to/tutorial-change-region-id-to-t3323883
ask in the tuto thread if you have a problem... Or PM me...
Good luck !
No upgrade
Hi,
When I run update.zip, fails, reboot and I get the message: "copy the update.zip to the root directory of your device".
How do I run it from the root?
Thanks
JulianCrun said:
Hi,
When I run update.zip, fails, reboot and I get the message: "copy the update.zip to the root directory of your device".
How do I run it from the root?
Thanks
Click to expand...
Click to collapse
Either you have the stock recovery : place the update.zip at the root of your Internal storage,
either you have an unlocked bootloader + custom recovery (TWRP 3.0.2-0) : place any .zip you want anywhere...
If you want a custom recovery, ask me.
cedric3 said:
Either you have the stock recovery : place the update.zip at the root of your Internal storage,
either you have an unlocked bootloader + custom recovery (TWRP 3.0.2-0) : place any .zip you want anywhere...
If you want a custom recovery, ask me.
Click to expand...
Click to collapse
Thanks.
This is the worst update for me....
cant update my meizu pro buy in dx.com ?
http://goo.gl/Exf1si
thanks!
juanpirata said:
cant update my meizu pro buy in dx.com ?
http://goo.gl/Exf1si
thanks!
Click to expand...
Click to collapse
of course !
wallah said:
This is the worst update for me....
Click to expand...
Click to collapse
Why? I kinda like it. I 'm just not happy with the possible spying malware from Meizu.
I am on 5.1.3.0G. Is there any way I can update to this without losing everything (apps, contacts, sms etc) on the phone? Thanks.
reneftw said:
I am on 5.1.3.0G. Is there any way I can update to this without losing everything (apps, contacts, sms etc) on the phone? Thanks.
Click to expand...
Click to collapse
Yes, installing without wiping...
cedric3 said:
Yes, installing without wiping...
Click to expand...
Click to collapse
Thanks. I read somewhere on the meizufans that I need to wipe data in order to update.
reneftw said:
Thanks. I read somewhere on the meizufans that I need to wipe data in order to update.
Click to expand...
Click to collapse
No you don't need to wipe, but warning ! You will lose unlocked bootloader, if you have it !
Ask me if you want to keep it...
cedric3 said:
No you don't need to wipe, but warning ! You will lose unlocked bootloader, if you have it !
Ask me if you want to keep it...
Click to expand...
Click to collapse
I didn't unlocked the bootloader yet because I didn't need it.
BTW, do you know if using this method: http://forum.xda-developers.com/showpost.php?p=65533839&postcount=69 we will get OTA updates on Global rom installed on Chinese phones?
reneftw said:
I didn't unlocked the bootloader yet because I didn't need it.
BTW, do you know if using this method: http://forum.xda-developers.com/showpost.php?p=65533839&postcount=69 we will get OTA updates on Global rom installed on Chinese phones?
Click to expand...
Click to collapse
I don't know... OTA is useless...
cedric3 said:
I don't know... OTA is useless...
Click to expand...
Click to collapse
It is not useless if I need to use the pc and adb everytime I want to update the global ROM on a Chinese phone.
Steps to definitively transform a chinese PRO 5 into International PRO 5
reneftw said:
It is not useless if I need to use the pc and adb everytime I want to update the global ROM on a Chinese phone.
Click to expand...
Click to collapse
No you won't need ADB...
Follow my steps :
You are on 5.1.30A
Install 4.5.0.0U or A
Root with the Meizu app "My Account"
Modify the file to spoof firmware type from China to International. (with that tutorial : http://forum.xda-developers.com/showpost.php?p=65533839&postcount=69)
You now have 4.5.0.0A, spoofed in G.
Simply install an International firmware (5.1.5.0G)
You now have 5.1.5.0G, no spoof : real International...
When 5.1.6.0G will be released, you will only have to simply install by downloading the update.zip to your PRO 5 with the browser... Then moving the file at the root with the file browser...
cedric3 said:
Modify the file to spoof firmware type from China to International.
Click to expand...
Click to collapse
Can you please tell me how to do this? Using the method in the link I posted? 4.5 Chinese or international?
Also, won't I need any wipe for all these steps to work?
Sent from my PRO 5 using Tapatalk
reneftw said:
Can you please tell me how to do this? Using the method in the link I posted? 4.5 Chinese or international?
Also, won't I need any wipe for all these steps to work?
Sent from my PRO 5 using Tapatalk
Click to expand...
Click to collapse
I have edited my previous post...
Greetings!
ROMs for the two variants of the Samsung Galaxy Tab A (2016, 10.1") with S Pen:
WiFi+Cellular (SM-P585Y) gtanotexllte (other variants, SM-P585, SM-P585N0, SM-P585M etc. not tested for ROM compatibility)
http://www.samsung.com/sg/tablets/galaxy-taba-p585/SM-P585YZWAXSP/WiFi only (SM-P580) gtanotexlwifi (even this has not been tested since I don't have this device)
http://www.samsung.com/us/business/support/owners/product/SM-P580NZKAXAR
Disclaimer: No warranties, stated or implied. Flashing a custom ROM might void your warranty. If you download the ROM & use it, you do so at your own risk. The author or XDA are not liable for any issues arising out of the usage of this ROM.
Different people have different requirements, so I have made available two versions of the ROM:
- Lite (heavily debloated with almost all Samsung apps removed, since I don't use them)
- Full (No debloat/no apps removed, apart from Knox)
Current version - Nougat 7.0 ROM v2 (rooted with Magisk 13.3)
Download Nougat 7.0 ROM v2 for SM-P580 WiFi only
Lite: Google Drive
Full: Google Drive
Download Nougat 7.0 ROM v1 for SM-P585Y WiFi+Cellular
Lite: Google Drive
Full: Google Drive
Previous versions - Marshmallow 6.0.1 ROMS (no further development):
Download Marshmallow 6.0.1 ROM v2 for SM-P585Y WiFi+Cellular (its somewhere between lite & full)
Mega, Mediafire, Dropbox,
Download Marchmallow 6.0.1 ROM v1 for SM-P580 WiFi only
Lite: Dropbox
Full: Dropbox
(Additional disclaimer: I don't have the WiFi only tab, so I cannot test this ROM. It underwent the same process as the WiFi+Cellular model, which I do have, so it should be okay. If you encounter any issues, please let me know.)
Pre-requisites:
Enable Developer options by going to Settings -> About device -> Software info -> click 7 times on 'Build number'.
Now go to Settings -> Developer options -> Turn on 'OEM Unlock' & 'USB Debugging' if not already done so.
Caution: The stock ROM has Verifed Boot enabled with device-mapper-verity (dm-verity) kernel feature, which prevents a successful bootup if it detects any modification to the original setup. See details. This needs to be disabled if you need to install a custom recovery, or a custom ROM.
Download dm-verity disabler:
https://build.nethunter.com/android-tools/no-verity-opt-encrypt/
Download TWRP recovery:
LTE version - https://twrp.me/devices/samsunggalaxytaba101lte2016spen.html
WiFi version - https://twrp.me/devices/samsunggalaxytaba101wifi2016spen.html
Instructions - Install TWRP Recovery & flash DM-Verity disabler:
Transfer the downloaded file 'no-verity-opt-encrypt-5.1.zip' to SD card or OTG USB drive.
Download Odin 3.12.3 or any recent version.
Shutdown your tab.
Use Power+Volume Down+Home to reach the Download screen & then press Volume Up to confirm.
Use the AP section to flash the TWRP recovery.
After installing TWRP via Odin, uncheck auto reboot & manually go into TWRP to install the file 'no-verity-opt-encrypt-5.1.zip'
THEN, format /data, DON'T wipe it.
Booting to the stock ROM AFTER installing TWRP without doing this will show you a Verification failed warning, asking you to reset to factory defaults, since you basically overwrote Samsung's default recovery with TWRP, so it is cross with you.
Instructions - Install ROM:
Copy ROM to SD card or OTG USB drive (TWRP can have issues reading the internal storage)
Insert the SD card or OTG USB drive into the tab (very important!)
Press Power + Volume Up + Home & keep them pressed till you reach the TWRP splash screen
Swipe right to allow modification
Install 'no-verity-opt-encrypt-5.1.zip' from SD card or OTG USB drive
Format /data
From Advanced Wipe, wipe Dalvik/ART Cache, System, Internal Storage & Cache
Install the ROM, no need to wipe again since we already wiped & formatted in TWRP
Remember to remove the tick mark against reboot before clicking next, do NOT reboot yet!
Wipe Dalvik/ART cache (yes, again, after ROM install)
NOW, Reboot
Let the ROM boot, give it time
Install any extra applications you need
Bugs/Limitations & Workarounds:
Some APKs have been removed as part of the deknox/debloat, however, the appropriate system level modifications have not been touched in order to remain as close to stock as possible. So if you try to change a setting which relies on the removed feature, the appropriate app might force close, or it may continue to wait for the missing app. This is expected. Currently I have no plans to correct this behavior.
Software updates will not work.
Google Play Services might force close, so you will need to update it.
Samsung notes may force close out of the box. Just update it from Google Play Store. It will work after that. (zayi)
Accessibility service doesn't work on the debloated/lite ROM. Just use any third party keyboard like Swiftkey/Google Gboard etc & then enable the service for the application you desire. (zayi)
ROM features: See post # 2
Extra recommendations for ROM & App recommendations: See post # 3
XPOSED (was only tested on Marshmallow 6.0.1 ROM, NOT on Nougat 7.0):
Xposed framework v86.1 (you can then upgrade to v87)
Xposed Installer v3.1
Xposed modules & other stuff
Credits/Thanks:
IAM_TheFlash for the inspiration & advice
Assayyed for Assayyed Kitchen, using which this ROM was built, along with the numeroud features of the kitchen, including the app debloat list
zayi for the excellent feedback & solutions to the problems the ROM causes.
AndroidSword for the invaluable guide.
zxz0O0 for the download tool.
XDA community for the platform
Samsung/updato.com/Samsung Updates Live/Alfafile/MrCrab for the ROM
ROM Screenshots for SM-P585Y attached for the Home screen, Applications & Software Info.
None for SM-P580, since I don't have the tab to test.
--
Jp
Current Nougat 7.0 Releases:
SM-P585Y Changelog::
v2:
Based on stock Nougat 7.0 XSA (Australia) firmware build P585YDXU1BQF1 from June 2, 2017
Android security patch level May 1, 2017
Deodexed
Zipaligned
Rooted with Magisk v13.3
SU.d support
Busybox installed
Build.prop tweaks
Init.d support
Ext4-TuneFS scripts
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
Debloated (Lite version, see attachment v3 for details of APK's removed)
SM-P580 Changelog::
v1:
Based on stock Nougat 7.0 XAR (United States) firmware build P580UEU1BQE4 from June 13, 2017
Android security patch level May 1, 2017
Deodexed
Zipaligned
Rooted with Magisk v13.3
SU.d support
Busybox installed
Build.prop tweaks
Init.d support
Ext4-TuneFS scripts
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
Debloated (Lite version, see attachment v3 for details of APK's removed)
Old Marshmallow 6.0.1 Releases:
SM-P585Y Changelog::
v2:
Added some of the stuff back, since it was not playing nice with /data format
Investigated Xposed compatibility & added links for Xposed framework, installer & modules
Updated instructions
v1/baseline:
Based on stock firmware build P585YDXU1API1
Android security patch level September 1, 2016
Deodexed
Zipaligned
Systemless pre-root with SuperSU
Busybox installed
Build.prop tweaks
Init.d support
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
SU.d support
Heavily debloated (See attachment for details of APK's removed)
Ext4-Tune2FS scripts
SM-P580 Changelog::
v1:
Based on stock firmware build P580ZSU1APJ3
Android security patch level September 1, 2016
Deodexed
Zipaligned
Systemless pre-root with SuperSU
Busybox installed
Build.prop tweaks
Init.d support
Knox removed
SQLite script
ADB Connect/SysRO SysRW scripts
SU.d support
Heavily debloated lite version & almost stock full version (See attachment for details of APK's removed in lite)
Ext4-Tune2FS scripts
Jp
Extra recommendations for the tab:
Since SM-P585Y doesn't have a huge internal storage, just 16 GB, out of which, only ~9 GB is left for the user, you may want to use adoptable storage to use your SD card as internal storage. Go to this thread by ashyx to enable adoptable storage, whereby you have the option to convert your SD card as an internal storage unit: http://forum.xda-developers.com/galaxy-tab-a/how-to/patch-adoptable-storage-enabler-t3507387. The only caveat is that it formats & converts the whole SD card for use as internal storage & you won't be able to pop the card out & use it on your PC to transfer data, you will need to transfer data via the USB cable just like you would for the internal storage.
Go to Developer options & turn off Windows, Transitions & Animator animations. It would visibly speed up your tab slightly by cutting down on the slight delay introduced by the animations.
App recommendations (Free in Play Store):
'Xodo PDF Reader & Editor' for PDF annotation
'INKredible - Handwriting Note' for taking notes with guaranteed beautiful handwriting
Jp
Can we instal xposed in these ROM?
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
zayi said:
Can we instal xposed in these ROM?
Click to expand...
Click to collapse
I went too far in my debloating, which doesn't play nice with formatting /data, so I've added some stuff back & christened the new ROM v2. Uploading, should be up shortly. I've installed Xposed on it. Looks okay.
EDIT: New ROM v2 uploaded.
I don't use Xposed much, however, I was able to install:
Xposed framework ver 86.1
Xposed Installer ver 3.1
Modules: Xposed edge & Gravitybox (MarshMallow)
It seems to be behaving itself, don't see any errors in my rudimentary testing.
Jp
veekay said:
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
Click to expand...
Click to collapse
LOL, Merry Christmas, WiFi folks.
I don't think there's much difference between the WiFi & LTE models apart from the SIM module , so if you're feeling brave, you can try to install it.
Otherwise let me try to look up the WiFi ROM & cook t the same way. Your tab would have to be the guinea pig though.
By the way, which is the software version for P580? I saw this one online: P580KXU1APJ1 from November 2016. Any release after that?
Jp
japinder said:
I went too far in my debloating, which doesn't play nice with formatting /data, so I've added some stuff back & christened the new ROM v2. Uploading, should be up shortly. I've installed Xposed on it. Looks okay.
EDIT: New ROM v2 uploaded.
I don't use Xposed much, however, I was able to install:
Xposed framework ver 86.1
Xposed Installer ver 3.1
Modules: Xposed edge & Gravitybox (MarshMallow)
It seems to be behaving itself, don't see any errors in my rudimentary testing.
Jp
Click to expand...
Click to collapse
Wow... ty so much. Download it and will try it today...thanks brother
Seems P580UEU1APH6 as far as XAR release.
BTW, does this get rid of the S pen features?
japinder said:
LOL, Merry Christmas, WiFi folks.
I don't think there's much difference between the WiFi & LTE models apart from the SIM module , so if you're feeling brave, you can try to install it.
Otherwise let me try to look up the WiFi ROM & cook t the same way. Your tab would have to be the guinea pig though.
By the way, which is the software version for P580? I saw this one online: P580KXU1APJ1 from November 2016. Any release after that?
Jp
Click to expand...
Click to collapse
my Samsung Notes stopped working. and always show notification "unfortunately, samsung notes has stopped". any idea what happen?
zayi said:
my Samsung Notes stopped working. and always show notification "unfortunately, samsung notes has stopped". any idea what happen?
Click to expand...
Click to collapse
Yes, that is an acknowledged bug.
However, I recently installed Xposed framework, Xposed installed & a couple of Xposed modules. Afterwords I again applied the dm-verity & no-ecryption zip and then again formatted data. Now Samsung Notes is back up running. Wondering, whether that has anything to do with Xposed, or the data format...
If you haven't setup a ton of apps, maybe you can just try to install the zip & format data to see if Samsung Notes works... However, it will mean starting from scratch again in terms of setting up your tab...
Jp
japinder said:
Yes, that is an acknowledged bug.
However, I recently installed Xposed framework, Xposed installed & a couple of Xposed modules. Afterwords I again applied the dm-verity & no-ecryption zip and then again formatted data. Now Samsung Notes is back up running. Wondering, whether that has anything to do with Xposed, or the data format...
If you haven't setup a ton of apps, maybe you can just try to install the zip & format data to see if Samsung Notes works... However, it will mean starting from scratch again in terms of setting up your tab...
Jp
Click to expand...
Click to collapse
Sry. after i update samsung notes via google play store that fix those problem. ty for your time. nice job for these rom.
zayi said:
Sry. after i update samsung notes via google play store that fix those problem. ty for your time. nice job for these rom.
Click to expand...
Click to collapse
LOL, that must have been it for me too, updating apps.
Thanks for the confirmation, updated first post.
Jp
Can you try to go to accessibility>vision>tts . I need to activate accessibility of some apps, but can't get through these tts. Make setting force close
zayi said:
Can you try to go to accessibility>vision>tts . I need to activate accessibility of some apps, but can't get through these tts. Make setting force close
Click to expand...
Click to collapse
Sorry, I removed TTS in my haste to debloat the ROM, since I don't use it.
I guess if you do need it, maybe I can upload another version of the ROM with zero debloat, which doesn't have any apps removed. It would be same as stock in terms of apps, but you still have the other features.
Let me know.
Jp
japinder said:
Sorry, I removed TTS in my haste to debloat the ROM, since I don't use it.
I guess if you do need it, maybe I can upload another version of the ROM with zero debloat, which doesn't have any apps removed. It would be same as stock in terms of apps, but you still have the other features.
Let me know.
Jp
Click to expand...
Click to collapse
OK I will wait for it. Ty
veekay said:
Gosh, saw a stock rom for the s pen model and got excited, until I saw it was the P585 only =[
Merry Christmas LTE guys!
Click to expand...
Click to collapse
veekay said:
Seems P580UEU1APH6 as far as XAR release.
BTW, does this get rid of the S pen features?
Click to expand...
Click to collapse
I've created two ROMs for the WiFi model, based off the build P580ZSU1APJ3:
- Lite (heavily debloated, with almost all Samsung apps removed, Air Command removed too)
- Full (only Knox removed, all other apps remain as it is, Air Command works)
So now both 2016 S-Pen tab models are equally represented. No partiality any longer.
Jp
Appreciate the work. Is it possible to have a lite version with just the s-pen functionality left in or is that dependent on too many other apps? Or, is there an apk that can be downloaded to re-enable air command?
japinder said:
I've created two ROMs for the WiFi model, based off the build P580ZSU1APJ3:
- Lite (heavily debloated, with almost all Samsung apps removed, Air Command removed too)
- Full (only Knox removed, all other apps remain as it is, Air Command works)
So now both 2016 S-Pen tab models are equally represented. No partiality any longer.
Jp
Click to expand...
Click to collapse
veekay said:
Appreciate the work. Is it possible to have a lite version with just the s-pen functionality left in or is that dependent on too many other apps? Or, is there an apk that can be downloaded to re-enable air command?
Click to expand...
Click to collapse
LOL, thanks. Its just selective debloat. Just more work, that's all.
These are APK's, but system apps, not user apps, so normal install like other apps may not work as intended, might be more messy, even if it works.
Air Command, the feature to pop up a selection of commands targeted towards the S Pen, is not a feature I find terribly useful. When I take out the S Pen, I use it for two purposes:
- Take handwritten notes with INKredible app.
- Annotate PDF's with Xodo.
Air Command just gets in the way, I have to dismiss it, causing one more S Pen click or back button key press. And keeps on showing the translucent button, which I can sometimes press inadvertently. Apart from Clock (I just like the white icon by Samsung, instead of horrible pale purple clock icon by Google), I just replace all the Samsung apps with the ones by Google. Hence the heavily debloated approach. I understand, Samsung Notes, with it OneNote like functionality might appeal to some people, the automatic prompt might appear cool too, even if its not for me.
Let me see what I can do, maybe a third, not-so-lite & not-so-full ROM. No ETA's though.
Jp
The tablet is my wifes and she uses this feature on the tab and her note - wouldn't be able to convince her to switch to a slimmed down rom without it
japinder said:
LOL, thanks. Its just selective debloat. Just more work, that's all.
These are APK's, but system apps, not user apps, so normal install like other apps may not work as intended, might be more messy, even if it works.
Air Command, the feature to pop up a selection of commands targeted towards the S Pen, is not a feature I find terribly useful. When I take out the S Pen, I use it for two purposes:
- Take handwritten notes with INKredible app.
- Annotate PDF's with Xodo.
Air Command just gets in the way, I have to dismiss it, causing one more S Pen click or back button key press. And keeps on showing the translucent button, which I can sometimes press inadvertently. Apart from Clock (I just like the white icon by Samsung, instead of horrible pale purple clock icon by Google), I just replace all the Samsung apps with the ones by Google. Hence the heavily debloated approach. I understand, Samsung Notes, with it OneNote like functionality might appeal to some people, the automatic prompt might appear cool too, even if its not for me.
Let me see what I can do, maybe a third, not-so-lite & not-so-full ROM. No ETA's though.
Jp
Click to expand...
Click to collapse
You can get the Android full OTA on from the Asus server here:
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS670KS/UL-I002D-WW-30.40.30.93-user.zip
security patch is March 2021
How can I check which software version I have?
Seosam said:
You can get the Android full OTA on from the Asus server here:
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS670KS/UL-I002D-WW-30.40.30.93-user.zip
security patch is March 2021
Click to expand...
Click to collapse
Is this the full stable version? I can't find it publicly showing up over at Asus..
How did you find it?
obeliksgall said:
How can I check which software version I have?
Click to expand...
Click to collapse
in Settings-System-about the phone
HawaiiFiveO said:
Is this the full stable version? I can't find it publicly showing up over at Asus..
How did you find it?
Click to expand...
Click to collapse
It`s stable, rolled out yesterday. You find changelog on TW Asus forum:
[210325]ZenFone 7 Pro / ZenFone 7_WW_30.40.30.93 (Android 11)
【版本號】 30.40.30.93 (Android 11) 【適用機種】 ZenFone 7 Pro (ZS671KS) ZenFone 7 (ZS670KS) 【發布日期】 2021/03/25 (系統完成自動推送約需一週，若未收到推送更新，請進入【設定】-->【關於】-->【系統更新】進行手動更新) 【系統優化】 升級系統至Android 11 更新智能管家、聯絡人、電話、檔案管理、計算機、時鐘、圖片庫、天氣、錄音程式、設定、一鍵換機與本機備份等應用程式 支援一次性權限，改進的檔案存取權限控制，自動重置權限等隱私功能 支援開啟飛航模式時，維持藍牙連線 調整為Android...
zentalk.asus.com
Thank you very much. phone updated, working fine .
Also updated manually everything works great.
obeliksgall said:
How can I check which software version I have?
Click to expand...
Click to collapse
Settings, System, About Phone
Hi everyone I manually upgraded with the file
UL-I002D-WW-30.40.30.93-user.zip downloaded from the ASUS server (see some posts above) in my ASUS ZENFONE 7PRO Italian version and everything went smoothly.
No data loss
Call recording remains as effective as on Android 10
Seems slightly faster
To perform the manual upgrade I proceeded in this way:
Downloaded the file from the ASUS server (see some posts above)
Copied the file in the main directory of the phone (No in the SD card)
Turn off the phone
Restarted the phone a notification will inform you that there is the file for the upgrade
Clicked on the notification and the rest happens automatically.
Remember to have the phone over 50% charged, if the procedure fails halfway through, it is painful.
Happy Easter everyone
Greetings from a new user of ASUS ZS671KS.
Just updated to Android 11 manually, so far everything seems to be OK. I had an issue with location not fixing on non-GPS satellites (posted the details here in the GPSTest Google group), and the update has resolved it for me. If you don't have this issue, you may want to wait until the update is officially rolled out in your region though, I'm sure it will be available soon. If you still want to try the manual update process, I suggest you do a full local backup to the microSD card before updating, just in case if you have to downgrade later (since it will wipe all your data).
The new full-OTA is here:
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS670KS/UL-I002D-WW-30.40.30.96-user.zip
Changelog:
Improved system stability
Fixed the problem of cold color temperature of indoor photos in certain scenes
Changelog for full update:
Special notice: This upgrade patch only allows to upgrade from Android 10 WW_29.14.53.23 version to Android 11. The other firmware version can't use this patch file to upgrade.
Improved Item:
1. Upgrade to Android 11
2. Revamped Mobile Manager, Contacts, Phone, File Manager, Calculator, Clock, Gallery, Weather, Sound recorder, Settings, Data Transfer, and Local backup apps
3. Support one-time permissions, improved scoped storage, and auto revoke app permission
4. Support to keep Bluetooth connection when airplane mode is activated
5. Adjusted notification tray to Android 11 design. Support notification conversations
6. Classic power button style supports device control and Google Pay in Android 11.
7. Added Use key to adjust volume, and advanced options for back gesture Settings. Updated Style and Auto switch in System color scheme Settings. Removed one hand mode.
8. Added Notification history and Bubbles settings
9. Adjusted the Quick Settings panel design, and support media control. Added Nearby Share tiles (Need to add manually)
10. Some 3rd party apps are not compatible with Android 11 yet
11. Please back up your data before upgrading to Android 11. If you want to downgrade your device’s software version to Android 10 by official software package, it will erase all data from your device’s internal storage.
12. Turned on the “Auto-download via Wi-Fi” setting in System update by default
13. Update google security patch to 2021-03-05
Steps of Update:
1. Check software version of your device**
2. Download device software and refer below for update SOP
[Phone] How to update firmware on my phone? | Official Support | ASUS Global
3. Only apply to same SKU update, Example: WW->WW, CN->CN, TW->TW.
4. Software update cannot transfer the software SKU and downgrade the software version.
5. Wrong SKU may cause update failure, please update the same SKU version only.
**How to know the device model?
Path: Settings->About-> Model number
Example: ASUS PadFone2
**How to know the device software version?
Path: Settings->About-> software information->Build number
Example: CHT_PadFone2-user-10.4.17.15-UpdateLauncher
**System upgrade may cause part of data missing, please back up your important data before system upgrading.
Seosam said:
The new full-OTA is here:
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS670KS/UL-I002D-WW-30.40.30.96-user.zip
Changelog:
Improved system stability
Fixed the problem of cold color temperature of indoor photos in certain scenes
Click to expand...
Click to collapse
Nice! I've downloaded it but how do we install the zip? Can't find any menu to install zips. Is there some kind of 3rd party software to be used for this, like LG has it's LGUP?
HawaiiFiveO said:
Nice! I've downloaded it but how do we install the zip? Can't find any menu to install zips. Is there some kind of 3rd party software to be used for this, like LG has it's LGUP?
Click to expand...
Click to collapse
You just have to copy it on the storage. Here is the manual:
[Phone] How to update firmware on my phone? | Official Support | ASUS Global
Message cancelled
Here is the new update:
https://dlcdnets.asus.com/pub/ASUS/ZenFone/ZS670KS/UL-I002D-WW-30.41.69.51-user.zip
changelog:
Fixed the camera overheating warning
Fixed the problem that it is difficult to wake up OK Google
Fixed unable to connect to specific WIFI issue
Fixed the issue that LINE must be unlocked before you can answer the call
Fixed unable to transfer files to laptop by Huawei Type-C cable.