XT1710-01 (USA Retail - RETAIL) = Download
ALBUS_RETAIL_9.0_PPS29.133-30_cid50_subsidy-DEFAULT-regulator-DEFAULT_CFC.xml.zip
XT1710-07 (Brazil Retail - RETBR) = Download
XT1710-07_ALBUS_RETBR_9.0_PPS29.133-30_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Please donate to this website to help support the archiving of android firmwares, thanks!
It's interesting that the RETAIL rom didn't work for me. I bought my Z2 directly from motorola in the US, and yet my phone is apparently designated albus_c, not just albus, so the update doesn't go through.
Knuxyl said:
XT1710-01 (USA Retail) = Download
ALBUS_RETAIL_9.0_PPS29.133-30_cid50_subsidy-DEFAULT-regulator-DEFAULT_CFC.xml.zip
XT1710-07 (Brazil Retail) = Download
XT1710-07_ALBUS_RETBR_9.0_PPS29.133-30_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
Please donate to this website to help support the archiving of android firmwares, thanks!
Click to expand...
Click to collapse
Should it working in moto z2 play xt1710-02 Verizon?? @knuxxyy
euskalzabe said:
It's interesting that the RETAIL rom didn't work for me. I bought my Z2 directly from motorola in the US, and yet my phone is apparently designated albus_c, not just albus, so the update doesn't go through.
Click to expand...
Click to collapse
If you boot into your bootloader, it will tell you albus or albus_c. Not sure why you received the albus_c if you bought directly from motorola.
In that case, your phone is considered RETUS, not RETAIL. The link below will take you to the RETUS firmware listing, but Pie for this version has not been released yet.
https://mirrors.lolinet.com/firmware/moto/albus/official/RETUS/
euskalzabe said:
It's interesting that the RETAIL rom didn't work for me. I bought my Z2 directly from motorola in the US, and yet my phone is apparently designated albus_c, not just albus, so the update doesn't go through.
Click to expand...
Click to collapse
Sherzaman Khan said:
Should it working in moto z2 play xt1710-02 Verizon?? @knuxxyy
Click to expand...
Click to collapse
I do not know, but from what I understand the bootloader cannot be unlocked on Verizon model so I doubt you can fastboot flash your device.
If you want the answer to that question your going tohave to try it.
Knuxyl said:
I do not know, but from what I understand the bootloader cannot be unlocked on Verizon model so I doubt you can fastboot flash your device.
If you want the answer to that question your going tohave to try it.
Click to expand...
Click to collapse
I tried already now my device stuck at bootloader saying start up failed now install stock rom oreo saying security version downgrade what i do? @knuxyl
Sherzaman Khan said:
I tried already now my device stuck at bootloader saying start up failed now install stock rom oreo saying security version downgrade what i do? @knuxyl
Click to expand...
Click to collapse
download latest vzw firmware and flash it
https://mirrors.lolinet.com/firmware/moto/albus/official/VZW/
I was and still am confused...I never knew what ALBUS meant. I thought it had something to do with another country Upgrade channel knowing that US is RETUS.
Seeing the 2nd post above-- I also bought my US Retail version from Moto and its the XT1710-01. When looking at phone settings - it mentioned RETUS somewhere. So I just booted to recovery- and Product/Variant is: albus XT1710-01. Does this mean that I can do the Fastboot method from OP?
Thx
Chris
Each Android device has it's code name. For Moto Z2 Play it is albus, although for some American devices it is albus_c. XT-1710-something is model number. In different countries, different models are sold. RETUS, RETAIL, RETEU, RETBR and so on are update channels. I believe that if your bootloader is locked, you can only flash update from the same channel and only update, not downgrade. If your bootloader is unlocked, you can flash also firmwares from other channels to update and downgrade but it still does not change your device's update channel.
So if you are not unlocked and your channel is RETUS, I don't think you can flash RETAIL or anything else than RETUS. And you will have to wait for Pie for RETUS to be released.
Klen2 said:
If your bootloader is unlocked, you can flash also firmwares from other channels to update and downgrade but it still does not change your device's update channel.
So if you are not unlocked and your channel is RETUS, I don't think you can flash RETAIL or anything else than RETUS. And you will have to wait for Pie for RETUS to be released.
Click to expand...
Click to collapse
Wait, wait. I'm on an Albus C, which uses RETUS. Are you telling me that by simply unlocking the bootloader I could use the RETBR official ROM and just update my phone already? It's that simple? Cos it's been 2 months already and I'm quite tired of this stupid unnecessary wait.
Related
Hi, I just bought this phone (H960A), but unfortunately seller told me that he bought it with a contract from one of Polish mobile operator. It will be probably bloated with many their apps, and there will be no marshmallow update for a long time.
Is it possible to flash 100% stock rom? I want get update directly from LG.
And btw, is there any way to obtain a root in marshmallow? I read a plenty of threads and I didn't find any answer.
rascal0pl said:
Hi, I just bought this phone (H960A), but unfortunately seller told me that he bought it with a contract from one of Polish mobile operator. It will be probably bloated with many their apps, and there will be no marshmallow update for a long time.
Is it possible to flash 100% stock rom? I want get update directly from LG.
And btw, is there any way to obtain a root in marshmallow? I read a plenty of threads and I didn't find any answer.
Click to expand...
Click to collapse
I think the MM OTA update is already available for your V10 variant.
tempurastyle said:
I think the MM OTA update is already available for your V10 variant.
Click to expand...
Click to collapse
But I'm talking about branded roms. Because of this, my father for example got the lollipop update for note 3 in the end of 2015...
rascal0pl said:
But I'm talking about branded roms. Because of this, my father for example got the lollipop update for note 3 in the end of 2015...
Click to expand...
Click to collapse
It doesn't matter if it's branded or not. There is a MM update available for euro version of H960A. Just install LG drivers and LG Bridge, plug in the phone to your pc and update via LG Bridge. If, for some reason, you don't get the update like that than go here: http://forum.xda-developers.com/lg-v10/general/official-software-h960a-v20a-t3354304. Download the kdz file and install with LGUP.
Hello all.
SM-G965U, was AT&T but now unlocked for Fi. In the US.
Build: R16NW.G965USQS3BRJ6
Security Patch: Nov 1
What do I need to do to get back to the OTA schedule? I'm presuming its to flash onto an unlocked ROM but I can't work out exactly which thread I need to be following to make that happen.
That is the newest update until they release Pie. You can manually flash a beta version of Pie or sign up for the beta program.
Electroz said:
That is the newest update until they release Pie. You can manually flash a beta version of Pie or sign up for the beta program.
Click to expand...
Click to collapse
Hi Electroz,
I'm still showing 'no update available' even with unlocked US apparently getting the update. Is there anything else I have to do? :/
dogiedogie said:
Hi Electroz,
I'm still showing 'no update available' even with unlocked US apparently getting the update. Is there anything else I have to do? :/
Click to expand...
Click to collapse
Wait a few days, the rollout might not be instantaneous
It's unlocked but still run the same AT&T branded firmware. All AT&T phone requires an ATT sim card and in US to receive OTA. It looks like you are on Fi so you need to get an active ATT sim from a friend to receive update.
What is the alternative to flashing some sort of generic ROM instead? Specifically what ROM would I need?
you need firmware version SM-G965USQU3CSAB THATS THE PIE UPDATE . it rebrands based on sim card so you wil be branded tmobile on project fi . here the thread with the link u want https://downloadmirror.co/2CXl/G965USQU3CSAB_G965UOYN3CSAB_CCT.zip
Wirelessmodz said:
you need firmware version SM-G965USQU3CSAB THATS THE PIE UPDATE . it rebrands based on sim card so you wil be branded tmobile on project fi . here the thread with the link u want https://downloadmirror.co/2CXl/G965USQU3CSAB_G965UOYN3CSAB_CCT.zip
Click to expand...
Click to collapse
Thanks. I think I'm actually going to go with SM-G965U1 G965U1UEU3CSA8 because I don't believe you get any carrier features with Fi, even if it piggybacks on Tmobile anyway.
I'm looking for the latest USA factory unlocked firmware for the Stylo 4 (KDZ file), does anyone know where I can find that? I have looked everywhere I can think of and everyone has carrier specific firmware, but not the one I am looking for.
The specific model is LMQ710ULM.AUSABK.
The IMEI is: 357183090498307
Try This
SpikeyPsyche said:
I'm looking for the latest USA factory unlocked firmware for the Stylo 4 (KDZ file), does anyone know where I can find that? I have looked everywhere I can think of and everyone has carrier specific firmware, but not the one I am looking for.
The specific model is LMQ710ULM.AUSABK.
The IMEI is: 357183090498307
Click to expand...
Click to collapse
Hi there,
I would like to know which specific carrier that your looking for.
Sincerely
KIBS2173
KIBS2173 said:
Hi there,
I would like to know which specific carrier that your looking for.
Sincerely
KIBS2173
Click to expand...
Click to collapse
It is the unlocked model sold directly by LG in the USA, so it is non-carrier firmware.
Try This
SpikeyPsyche said:
It is the unlocked model sold directly by LG in the USA, so it is non-carrier firmware.
Click to expand...
Click to collapse
Hi there,
You can try this website.
https://lg-firmwares.com/
or
https://lg-firmwares.com/lg-lmq710ulm-firmwares/#tab=firmwares
since your phone is network unlocked I think it might be safe to reinstall the firmware.
However, if you have your doubts feel free to search it online or ask LG directly.
Sincerely
KIBS2173
KIBS2173 said:
Hi there,
You can try this website.
https://lg-firmwares.com/
or
https://lg-firmwares.com/lg-lmq710ulm-firmwares/#tab=firmwares
since your phone is network unlocked I think it might be safe to reinstall the firmware.
However, if you have your doubts feel free to search it online or ask LG directly.
Sincerely
KIBS2173
Click to expand...
Click to collapse
Thank you. I found out that they never released the KDZ for the factory unlocked phones (region USA). So, the only way to update my phone would be to flash carrier firmware, which, is kinda risky, since it would technically be a crossflash. I would likely lose certain features, such as Wi-Fi calling and/or VoLTE. One of the few firmwares that supports wi-fi calling is the T-Mobile firmware, but I wouldn't flash that firmware because it is different than the hardware of my phone (their model has 2 GB of RAM, mine has 3 GB of RAM, etc...
Try This
SpikeyPsyche said:
Thank you. I found out that they never released the KDZ for the factory unlocked phones (region USA). So, the only way to update my phone would be to flash carrier firmware, which, is kinda risky, since it would technically be a crossflash. I would likely lose certain features, such as Wi-Fi calling and/or VoLTE. One of the few firmwares that supports wi-fi calling is the T-Mobile firmware, but I wouldn't flash that firmware because it is different than the hardware of my phone (their model has 2 GB of RAM, mine has 3 GB of RAM, etc...
Click to expand...
Click to collapse
Hi there,
Yes, while I was researching it online I found two firmware for this phone for the US region. But anyways have you tried using a PC suite from LG to reinstall the firmware. Or have you tried going on to the recovery mode and just reset the whole device. Or better try to install a custom ROM, to be honest I think it might be okay if you flashed a Europe region firmware, but make sure you back up the current firmware. I flashed a Samsung phone which was used to be locked and then I unlocked it after that I flashed the carrier firmware and it didnt carrier locked my phone. But anyways try your best.
Sincerely
KIBS2173
I bought this phone second hand and I can't seem to find firmwares of this specific model, would love to know if I can crossflash without any problems?
Rko4A-GE said:
I bought this phone second hand and I can't seem to find firmwares of this specific model, would love to know if I can crossflash without any problems?
Click to expand...
Click to collapse
Hi, Not without problems, still fighting with it. Actually crossflash has happened but there are issues now. Is there any chance that you could prepare a dump of your version? It would be helpful for extract the boot.img from it.
I can crossflash at&t variant to EA with the help of firehose. Could you share a back up of your modem_a partition? I want to see what carrier is supported in the this variant.
I can not reach any of the files actually. What I did is that crossflashed my Docomo variant to EA which went without error. But NT code is not matching now and there is no bootloader unlock option. Not only the LG stopped to provide unlock.bin but bootloader menu is not available. If you reach there on any way the device is restarting in normal mode. I was thinking in many possibilities but not sure if any is feasible. tried to change between many EA ROMS. Also I was thinking after all to do the chip erase by LGUP. As the PDM is not working now probably would not work after erase, in that case one more step only bacward. By the way I dont know why the LGUP can not touch the device in the blue factory mode. That is the point where the PDM set can not be done for the NT change. Otherwise root or bootloader unlock would not be important to me about other reason than replace bootloader to the EA version.
SZ0TYI said:
I can not reach any of the files actually. What I did is that crossflashed my Docomo variant to EA which went without error. But NT code is not matching now and there is no bootloader unlock option. Not only the LG stopped to provide unlock.bin but bootloader menu is not available. If you reach there on any way the device is restarting in normal mode. I was thinking in many possibilities but not sure if any is feasible. tried to change between many EA ROMS. Also I was thinking after all to do the chip erase by LGUP. As the PDM is not working now probably would not work after erase, in that case one more step only bacward. By the way I dont know why the LGUP can not touch the device in the blue factory mode. That is the point where the PDM set can not be done for the NT change. Otherwise root or bootloader unlock would not be important to me about other reason than replace bootloader to the EA version.
Click to expand...
Click to collapse
I was actually just about to try to crossflash my L-51A to the TM2X variant. What do you mean by NT code is not matching? What advice can I get about doing this?
nclam said:
I was actually just about to try to crossflash my L-51A to the TM2X variant. What do you mean by NT code is not matching? What advice can I get about doing this?
Click to expand...
Click to collapse
can you please make a full dump of your FW?
i have a ruined L-51A with a lost IMEI, and I didn't think I'll end up having this problem so I didn't back up the whole contents...
Same here. If anyone has a docomo kdz please let us know.
LG v60 51a does not have kdz.
But if you update outside of Japan, try it like a link. I tried it in the Korean community and confirmed that it was updated.
Cross-flash will be difficult in a general way.
The partition composition is different between the US version and the European version.
[How To] Update Sharp Aquos R6 Outside Japan - Docomo Version - Without Factory Reset
It's been said that Docomo phone are easier to update, only Japan VPN needed. But in reality it's not that simple. Even after using VPN, most of the time you wont be able to find OTA update through system update. Sure factory reset can help you...
forum.xda-developers.com
Rko4A-GE said:
I bought this phone second hand and I can't seem to find firmwares of this specific model, would love to know if I can crossflash without any problems?
Click to expand...
Click to collapse
SIR . can you have backup up partision for sharing. i need softbank firmware
andamiro00 said:
LG v60 51a does not have kdz.
But if you update outside of Japan, try it like a link. I tried it in the Korean community and confirmed that it was updated.
Cross-flash will be difficult in a general way.
The partition composition is different between the US version and the European version.
[How To] Update Sharp Aquos R6 Outside Japan - Docomo Version - Without Factory Reset
It's been said that Docomo phone are easier to update, only Japan VPN needed. But in reality it's not that simple. Even after using VPN, most of the time you wont be able to find OTA update through system update. Sure factory reset can help you...
forum.xda-developers.com
Click to expand...
Click to collapse
Hi am unable to find google services framework in my l-51a docomo v60 please help me to upgrade to A12 am from india i just bought this phone new demo unit
Dharshan yadav said:
Hi am unable to find google services framework in my l-51a docomo v60 please help me to upgrade to A12 am from india i just bought this phone new demo unit
Click to expand...
Click to collapse
There will be a Google framework.
App-App Information-Three points on the right-click System Display and search or search for Google Framework.
andamiro00 said:
There will be a Google framework.
App-App Information-Three points on the right-click System Display and search or search for Google Framework.
Click to expand...
Click to collapse
Pleade refer screenshot if i type google in setings only these are coming
Dharshan yadav said:
Pleade refer screenshot if i type google in setings only these are coming
Click to expand...
Click to collapse
Settings - Search in the app.
Of course, it doesn't appear in the integrated search.
Tried that too refer attatched
Dharshan yadav said:
Tried that too refer attatched
Click to expand...
Click to collapse
Thankyou am able to find it
Also would like to know is it ok to install global stock rom in docomo l-51a
Dharshan yadav said:
Thankyou am able to find it
Also would like to know is it ok to install global stock rom in docomo l-51a
Click to expand...
Click to collapse
Yes you can ,i crossflashed my A51L docomo variant to candian TMO Android 12 .it working very nice.before that you should be very patient.take every file backup in efil mode store the backup very safe place...docomo model does not show OP_A OP_B floder...
k.syedhussain said:
Yes you can ,i crossflashed my A51L docomo variant to candian TMO Android 12 .it working very nice.before that you should be very patient.take every file backup in efil mode store the backup very safe place...docomo model does not show OP_A OP_B floder...
Click to expand...
Click to collapse
Thank you so much yesterday I have upgraded the os to Android 12
If needed I'll ask for you help in future for cross flashing and rooting this mobile
Once again thank you so much for your promt response
Dharshan yadav said:
Thank you so much yesterday I have upgraded the os to Android 12
If needed I'll ask for you help in future for cross flashing and rooting this mobile
Once again thank you so much for your promt response
Click to expand...
Click to collapse
If you upgraded ,comfortable with docomo firmware use it as its ....but i not comfortable with Japanese bloatwares so i crossflashed and tried to get volte but not possible....
k.syedhussain said:
If you upgraded ,comfortable with docomo firmware use it as its ....but i not comfortable with Japanese bloatwares so i crossflashed and tried to get volte but not possible....
Click to expand...
Click to collapse
https://www.reddit.com/r/LGV60/comments/xqfmu6
volte try this way
Hello all,
I recently purchased V60 with model number V600TM. I'm outside of US.
And it stuck on Android 10 with security patch on February 2020.
Any recommendation, please?
Can anyone confirm if i can use this method here?
How to Flash Stock Firmware on LG Smartphone ? - LG-Firmwares.com
Tutorial how to flashing LG device. Change or update Firmware on LG phones.
lg-firmwares.com
That method using LGUP is totally fine but you need the firmware for 600TM. Android 12 is not available for download from the site yet.
Hello,
received yesterday my unit with Android 10 and with exactly you issue: unable to apply the downloaded OTA update.
There are 3 types of TM software otas or roms, there is tmobile, us cellular, and canadian so make sure you downloed the rom that has the initials TMO next to it.
I updated my TM version v60 to A12 (https://forum.xda-developers.com/t/lmv600tm-restore-ugrade-guide-a12.4447457)
After that I can get OTA but cannot install successfully (P.S. bootloader is unlocked and the device is rooted)
showgood163 said:
I updated my TM version v60 to A12 (https://forum.xda-developers.com/t/lmv600tm-restore-ugrade-guide-a12.4447457)
After that I can get OTA but cannot install successfully (P.S. bootloader is unlocked and the device is rooted)
Click to expand...
Click to collapse
use that method mean restore your phone with other's OS, do it when you phone brick, otherwise use LGUP flash your exactly KDZ is the best.
dangtoi1993 said:
use that method mean restore your phone with other's OS, do it when you phone brick, otherwise use LGUP flash your exactly KDZ is the best.
Click to expand...
Click to collapse
Thanks for the input.
Does the partition restoring way affects the installing of OTAs?
honestloez said:
Hello all,
I recently purchased V60 with model number V600TM. I'm outside of US.
And it stuck on Android 10 with security patch on February 2020.
Any recommendation, please?
Click to expand...
Click to collapse
Use a vpn and you will get updates
Let me repeat myself:
If you are rooted, OTA will not happen. Your phone will download the update but not complete the updating. The advice to use LGUP for partition restoration will NOT help! First, you will lose your rooted status and two, OTA will not succeed. Bringing you back to square one.
Royaltiger said:
Let me repeat myself:
If you are rooted, OTA will not happen. Your phone will download the update but not complete the updating. The advice to use LGUP for partition restoration will NOT help! First, you will lose your rooted status and two, OTA will not succeed. Bringing you back to square one.
Click to expand...
Click to collapse
sure, LG is alway hard about firmware.
I have Oneplus phone, its had super partitions a/b like V60 (and modern android phone). On Oneplus 8 pro, i can download and install while keeping root it self, easy as f.