Dear Messrs. And members of the XDA-Developres. I'm re-editing this topic because "abandoned" the Realease canditade RC2 version of X86 Android 4.4 2014,05,20, for the most current version. The stabilized R1 version, the download page, the following URL: sites.google.com/a/android-x86.org. I am still using USB-Stick Flash nand. The "physical" machine is still the PC, notebook, X68 Intel Core2Duo T6500 positive 2,10Ghz 4GbRam using Wi-Fi on my WAN connection (PPPoE) via external modem adsl. And continuing to sweat the Android Operating System version 4.4. WEBSERVER on fixed Operator "Hi" with R1 2014, 08.20 for residential VPN connection.
After installing this version worked "almost" as mobile phone, but not as a PC. Look at some of the "functions" that must be enabled in my opinion, comparing Windows and Linux (Big).
1_ can not resize the screen display for some PPAs. There is no option in "Settings" to "Video Resolution," as there is in other systems to change the magnification of the screen, if this is a notebook cde 14 "has the standard 1280 x 800.
2_ can not customize with walpapers because "Trebuchet" was not built into the system. And I think that has to do with the "Gallery" photo album. that does not work either.
*3- The default browser "Blue terrra" displays the numbers as if the screen 14 "LCD display of a mobile phone, full size.
4- There install apps from PlayStores for reading text files, office type, for example: APP "andropen Office" which serveria to test "compatibility" and "complex formatting."
5_ LACK the manager to print text files into physical printer.
6_ is required with Chrome bookmarks bar or markers and newtab. And the external function "Copy and Paste". How can we translate using the Android system?
This is a post just use the X86 system to the sedenvolvedores can "improve" and "see" the system to behave in my type of hardware. Waiting for better versions. Bos luck and a strong bear hug. ID: morenopaidegua. Xda-developer member.
..................................................................................... traducion portuguese Brazil ....................................................................................
Caros Srs. e membros do XDA-Developres. Eu estou re-editando este tópico, porque "abandonei" a versão Realease Canditade RC2 do Android X86 4.4 de 2014,Mai,20, pela a versão mais atual. A versão R1 estabilizada, da página de download, da seguinte URL: sites.google.com/a/android-x86.org. Ainda estou usando USB-Stick Flash nand. A máquina "física" ainda é o PC, notebook, X68 Intel Core2Duo T6500 positivo 2,10Ghz 4GbRam, usando o Wi-Fi em minha conexão WAN (PPPoE) por meio modem adsl externo. E continuando a suar o Android Operating System versão 4.4 . WEBSERVER ligado fixo Operadora "Oi" com R1 de 2014, Aug,20, por conexão por rede VPN residencial.
Depois de instalar esta versão trabalhou "quase" como telefone celular, mas não como um PC. Olhe para algumas das "funções" que deve ser habilitado na minha opinião, comparando Windows e Linux (Big).
1_ não é possível redimensionar a exibição da tela para alguns APPs. Não há nenhuma opção em "configurações" para "Resolução de vídeo", como há em outros sistemas para alterar a ampliação da tela, no caso aqui é um notebook cde 14" tem por padrão 1280 x 800.
2_ não se pode personalizar com Walpapers , porque o "Trebuchet" não foi incorporado ao sistema. E creio que tem a ver com a "Galeria", de álbum de fotos. que também não funciona.
3_ O navegador padrao "terrra azul" exibe os números, como se o tela de 14" de exibição de LCD de um telefone móvel, em tamanho grande.
4- Não há instalar APPS da PlayStores para leitura de arquivos de texto, tipo office, como exemplo: o APP "andropen Office", que serveria para teste de "compatibilidade" e "formatação complexa".
5_ FALTA o gerenciador de imprimir arquivos de texto em impressora física.
6_ É necessário o Chrome com barra de favoritos ou marcadores e newtab. E a função externa "Copiar e colar". Como poderemos traduzir, usando o sistema Android?
Este é um post apenas de uso do sistema X86, para os sedenvolvedores possam "melhorar" e "ver" com se comportar o sistema no meu tipo de hardware. Esperando por versões melhores. Bos sorte e um forte abraço forte. ID: morenopaidegua. Xda-developer membro.
hi to all I have a tanix tx5pro with xtmod_ex but now this rom is obsolete you have some nice performing rom to recommend for tx5pro
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hnera said:
hi to all I have a tanix tx5pro with xtmod_ex but now this rom is obsolete you have some nice performing rom to recommend for tx5pro
View attachment 5160999
Click to expand...
Click to collapse
Try My Custom ROM, Its a port of the official Mi Box Firmware To Other Devices, Runs Well even on low ram devices
https://aidansrom.wordpress.com/
aidanmacgregor said:
Try My Custom ROM, Its a port of the official Mi Box Firmware To Other Devices, Runs Well even on low ram devices
https://aidansrom.wordpress.com/
Click to expand...
Click to collapse
my box is s905x ?
so it would be enough to install any rom compatible with s905x right?
Hnera said:
my box is s905x ?
so it would be enough to install any rom compatible with s905x right?
View attachment 5161055
Click to expand...
Click to collapse
Yes most should work around 90% of devices are compatible to some degree (boots and runs) with each others firmwares there are outliers thought that for some reason (dtb diffrences too far from the reference design) for example but TX5 should work
aidanmacgregor said:
Yes most should work around 90% of devices are compatible to some degree (boots and runs) with each others firmwares there are outliers thought that for some reason (dtb diffrences too far from the reference design) for example but TX5 should work
Click to expand...
Click to collapse
I own the tx5 PRO. How can I get the wifi chip version?
giupardeb_ said:
I own the tx5 PRO. How can I get the wifi chip version?
Click to expand...
Click to collapse
Only way to to open and see what's printed on the chip
TX5 Pro: WIFI ERROR SOLVED - ROM with lan wireless Fn-Link 8223A driver
Contribution: Firmware (ROM) for TV Box TX5 Pro (Tanix Amlogic S905X 4K TV BOX) supporting 8223A-SR QCA9377 QCA1023 SDIO Wifi Bluetooth
This is the blue plate model, launched on 08/08/2017. Beta version of the equipment and exactly the most commercialized in Brazil and Russia.
The TX5 Pro model received two more network card versions (WiFi Qualcomm QCA9377 and QCA1023 chipset), so the firmware available on the Tanix website does not include the drivers for this version's Fn-Link 8223A, but for the Qualcom chipsets. Therefore, the equipment that receives the original ROM from the manufacturer does not activate Wireless or Bluetooth. Finding the right ROM can take you weeks of research...
Many without this information believe that the Wireless/Bluetooth card is burnt. But just load the correct ROM for the equipment to work again. Even with better performance.
580.31 MB folder on MEGA
2 files
mega.nz
To install:
1. Save correct ROM file on PC.
2. Download and install USB Burinig Tool
3. Connect a USB cable (male-male) to the PC, and before connecting the other end to the TV Box (no need to turn on the power) press the reset hole located under the equipment. The USB connection will power the equipment, which will display the logo on the TV or monitor connected to the HDMI.
4. The USB connection is the middle one (does not respond to any USB of the equipment), when connected successfully, the PC will emit a sound alert similar to the connection of a pen-drive and the port used and the port used will be displayed in the USB Burning Tool. the success message. If not, change the cable to another USB port.
5. Once connected, in the USB Burning Tool, load the ROM file (*.IMG), and press the START button. Recording status that occurs in less than 3 minutes will be displayed.
6. When finished, click on STOP before disconnecting the equipment. Then just close the software, remove the equipment and start it normally connected to the power source and the TV.
Tip: The recording process is not called Burn for nothing, the chipset heats up when recording is received. The recording program comes with default "temperature" setting to operate between 20~40 degrees. But in this equipment, we need to go up to 20~80 to resolve write error, when incomplete Status at 97% is displayed in red flag. When raising the maximum allowable temperature setting, you will have a Green Status with 100% success in most cases.
PT-BR:
Contribuição: Firmware (ROM) para TV Box TX5 Pro (Tanix Amlogic S905X 4K TV BOX) com suporte a 8223A-SR QCA9377 QCA1023 SDIO Wifi Bluetooth
Trata-se do modelo placa azul, lançado em 08/08/2017. Versão beta do equipamento e exatamente o mais comercializado no Brasil e Rússia.
O modelo TX5 Pró recebeu mais duas versões de placa de rede (chipset WiFi Qualcomm QCA9377 e QCA1023), portanto os firmwares disponíveis no site da Tanix não incluem os drivers para Fn-Link 8223A desta versão, mas sim para os chipsets Qualcom. Logo o equipamento que recebe a ROM original do fabricante, não ativa Wireless nem Bluetooth. Encontrar a ROM correta pode te custar semanas de pesquisa...
Muitos sem esta informação, acreditam que a placa Wireless/Bluetooth está queimada. Mas basta carregar a ROM correta para que o equipamento volte a funcionar. Inclusive com melhor performance.
580.31 MB folder on MEGA
2 files
mega.nz
Para instalar:
1. Salve o arquivo ROM correto no PC.
2. Baixe e instale o USB Burinig Tool
3. Conecte um cabo USB (macho-macho) no PC, e antes de conectar a outra extremidade ao TV Box (não é necessário ligar energia) precione o orifício de reset localizado em baixo do equipamento. A conexão USB irá alimentar o equipamento, que exibirá o logo na TV ou monitor conectado ao HDMI.
4. A conexão USB é a do meio (não responde em qualquer USB do equipamento), quando conectado com sucesso, o PC emitirá o alerta sonoro semelhante ao de conexão de um pen-drive e será exibido no USB Burning Tool a porta utilizada e a mensagem de sucesso. Se não ocorrer, troque o cabo para outra porta USB.
5. Uma vez conectado, no USB Burning Tool, carregue o arquivo ROM (*.IMG), e pressione o botão START. Será exibido o status de gravação que ocorre em menos de 3 minutos.
6. Ao finalizar, clique em STOP antes de desconectar o equipamento. Em seguida basta fechar o software, remover o equipamento e inicializá-lo normalmente conectado a fonte de energia e a TV.
Dica: O processo de gravação não se chama Burn a toa, o chipset esquenta ao receber gravação. O programa de gravação, vem com definição padrão de "temperatura" para operar entre 20~40 graus. Mas neste equipamento, precisamos subir para 20~80 para resolver erro de gravação, quando é exibido o Status incompleto em 97% sinalizado em vermelho. Ao subir a configuração de temperatura máxima permitida, você terá um Status verde com 100% de sucesso na maioria dos casos.
recaetano said:
TX5 Pro: WIFI ERROR SOLVED - ROM with lan wireless Fn-Link 8223A driver
Contribution: Firmware (ROM) for TV Box TX5 Pro (Tanix Amlogic S905X 4K TV BOX) supporting 8223A-SR QCA9377 QCA1023 SDIO Wifi Bluetooth
This is the blue plate model, launched on 08/08/2017. Beta version of the equipment and exactly the most commercialized in Brazil and Russia.
The TX5 Pro model received two more network card versions (WiFi Qualcomm QCA9377 and QCA1023 chipset), so the firmware available on the Tanix website does not include the drivers for this version's Fn-Link 8223A, but for the Qualcom chipsets. Therefore, the equipment that receives the original ROM from the manufacturer does not activate Wireless or Bluetooth. Finding the right ROM can take you weeks of research...
Many without this information believe that the Wireless/Bluetooth card is burnt. But just load the correct ROM for the equipment to work again. Even with better performance.
580.31 MB folder on MEGA
2 files
mega.nz
To install:
1. Save correct ROM file on PC.
2. Download and install USB Burinig Tool
3. Connect a USB cable (male-male) to the PC, and before connecting the other end to the TV Box (no need to turn on the power) press the reset hole located under the equipment. The USB connection will power the equipment, which will display the logo on the TV or monitor connected to the HDMI.
4. The USB connection is the middle one (does not respond to any USB of the equipment), when connected successfully, the PC will emit a sound alert similar to the connection of a pen-drive and the port used and the port used will be displayed in the USB Burning Tool. the success message. If not, change the cable to another USB port.
5. Once connected, in the USB Burning Tool, load the ROM file (*.IMG), and press the START button. Recording status that occurs in less than 3 minutes will be displayed.
6. When finished, click on STOP before disconnecting the equipment. Then just close the software, remove the equipment and start it normally connected to the power source and the TV.
Tip: The recording process is not called Burn for nothing, the chipset heats up when recording is received. The recording program comes with default "temperature" setting to operate between 20~40 degrees. But in this equipment, we need to go up to 20~80 to resolve write error, when incomplete Status at 97% is displayed in red flag. When raising the maximum allowable temperature setting, you will have a Green Status with 100% success in most cases.
PT-BR:
Contribuição: Firmware (ROM) para TV Box TX5 Pro (Tanix Amlogic S905X 4K TV BOX) com suporte a 8223A-SR QCA9377 QCA1023 SDIO Wifi Bluetooth
Trata-se do modelo placa azul, lançado em 08/08/2017. Versão beta do equipamento e exatamente o mais comercializado no Brasil e Rússia.
O modelo TX5 Pró recebeu mais duas versões de placa de rede (chipset WiFi Qualcomm QCA9377 e QCA1023), portanto os firmwares disponíveis no site da Tanix não incluem os drivers para Fn-Link 8223A desta versão, mas sim para os chipsets Qualcom. Logo o equipamento que recebe a ROM original do fabricante, não ativa Wireless nem Bluetooth. Encontrar a ROM correta pode te custar semanas de pesquisa...
Muitos sem esta informação, acreditam que a placa Wireless/Bluetooth está queimada. Mas basta carregar a ROM correta para que o equipamento volte a funcionar. Inclusive com melhor performance.
580.31 MB folder on MEGA
2 files
mega.nz
Para instalar:
1. Salve o arquivo ROM correto no PC.
2. Baixe e instale o USB Burinig Tool
3. Conecte um cabo USB (macho-macho) no PC, e antes de conectar a outra extremidade ao TV Box (não é necessário ligar energia) precione o orifício de reset localizado em baixo do equipamento. A conexão USB irá alimentar o equipamento, que exibirá o logo na TV ou monitor conectado ao HDMI.
4. A conexão USB é a do meio (não responde em qualquer USB do equipamento), quando conectado com sucesso, o PC emitirá o alerta sonoro semelhante ao de conexão de um pen-drive e será exibido no USB Burning Tool a porta utilizada e a mensagem de sucesso. Se não ocorrer, troque o cabo para outra porta USB.
5. Uma vez conectado, no USB Burning Tool, carregue o arquivo ROM (*.IMG), e pressione o botão START. Será exibido o status de gravação que ocorre em menos de 3 minutos.
6. Ao finalizar, clique em STOP antes de desconectar o equipamento. Em seguida basta fechar o software, remover o equipamento e inicializá-lo normalmente conectado a fonte de energia e a TV.
Dica: O processo de gravação não se chama Burn a toa, o chipset esquenta ao receber gravação. O programa de gravação, vem com definição padrão de "temperatura" para operar entre 20~40 graus. Mas neste equipamento, precisamos subir para 20~80 para resolver erro de gravação, quando é exibido o Status incompleto em 97% sinalizado em vermelho. Ao subir a configuração de temperatura máxima permitida, você terá um Status verde com 100% de sucesso na maioria dos casos.
Click to expand...
Click to collapse
So is it a universal rom? I have the TX5 Pro QCA9377 running atvXperience v5 BETA. This little box is very good, everything works, I can even connect my headphones via bluetooth.
Just one question. Does DirecTV Go work in this rom? Only that not even Apple TV works for me with atvXperience.
--------------
Então é uma rom universal? Eu tenho o TX5 Pro QCA9377 rodando atvXperience v5 BETA. Essa caixinha é muito boa, tudo funciona, posso até conectar meus fones de ouvido via bluetooth.
Apenas uma pergunta. DirecTV Go funciona nesta rom? Só que nem a Apple TV funciona para mim com o atvXperience.
recaetano said:
TX5 Pro: WIFI ERROR SOLVED - ROM with lan wireless Fn-Link 8223A driver
Contribution: Firmware (ROM) for TV Box TX5 Pro (Tanix Amlogic S905X 4K TV BOX) supporting 8223A-SR QCA9377 QCA1023 SDIO Wifi Bluetooth
This is the blue plate model, launched on 08/08/2017. Beta version of the equipment and exactly the most commercialized in Brazil and Russia.
The TX5 Pro model received two more network card versions (WiFi Qualcomm QCA9377 and QCA1023 chipset), so the firmware available on the Tanix website does not include the drivers for this version's Fn-Link 8223A, but for the Qualcom chipsets. Therefore, the equipment that receives the original ROM from the manufacturer does not activate Wireless or Bluetooth. Finding the right ROM can take you weeks of research...
Many without this information believe that the Wireless/Bluetooth card is burnt. But just load the correct ROM for the equipment to work again. Even with better performance.
580.31 MB folder on MEGA
2 files
mega.nz
To install:
1. Save correct ROM file on PC.
2. Download and install USB Burinig Tool
3. Connect a USB cable (male-male) to the PC, and before connecting the other end to the TV Box (no need to turn on the power) press the reset hole located under the equipment. The USB connection will power the equipment, which will display the logo on the TV or monitor connected to the HDMI.
4. The USB connection is the middle one (does not respond to any USB of the equipment), when connected successfully, the PC will emit a sound alert similar to the connection of a pen-drive and the port used and the port used will be displayed in the USB Burning Tool. the success message. If not, change the cable to another USB port.
5. Once connected, in the USB Burning Tool, load the ROM file (*.IMG), and press the START button. Recording status that occurs in less than 3 minutes will be displayed.
6. When finished, click on STOP before disconnecting the equipment. Then just close the software, remove the equipment and start it normally connected to the power source and the TV.
Tip: The recording process is not called Burn for nothing, the chipset heats up when recording is received. The recording program comes with default "temperature" setting to operate between 20~40 degrees. But in this equipment, we need to go up to 20~80 to resolve write error, when incomplete Status at 97% is displayed in red flag. When raising the maximum allowable temperature setting, you will have a Green Status with 100% success in most cases.
PT-BR:
Contribuição: Firmware (ROM) para TV Box TX5 Pro (Tanix Amlogic S905X 4K TV BOX) com suporte a 8223A-SR QCA9377 QCA1023 SDIO Wifi Bluetooth
Trata-se do modelo placa azul, lançado em 08/08/2017. Versão beta do equipamento e exatamente o mais comercializado no Brasil e Rússia.
O modelo TX5 Pró recebeu mais duas versões de placa de rede (chipset WiFi Qualcomm QCA9377 e QCA1023), portanto os firmwares disponíveis no site da Tanix não incluem os drivers para Fn-Link 8223A desta versão, mas sim para os chipsets Qualcom. Logo o equipamento que recebe a ROM original do fabricante, não ativa Wireless nem Bluetooth. Encontrar a ROM correta pode te custar semanas de pesquisa...
Muitos sem esta informação, acreditam que a placa Wireless/Bluetooth está queimada. Mas basta carregar a ROM correta para que o equipamento volte a funcionar. Inclusive com melhor performance.
580.31 MB folder on MEGA
2 files
mega.nz
Para instalar:
1. Salve o arquivo ROM correto no PC.
2. Baixe e instale o USB Burinig Tool
3. Conecte um cabo USB (macho-macho) no PC, e antes de conectar a outra extremidade ao TV Box (não é necessário ligar energia) precione o orifício de reset localizado em baixo do equipamento. A conexão USB irá alimentar o equipamento, que exibirá o logo na TV ou monitor conectado ao HDMI.
4. A conexão USB é a do meio (não responde em qualquer USB do equipamento), quando conectado com sucesso, o PC emitirá o alerta sonoro semelhante ao de conexão de um pen-drive e será exibido no USB Burning Tool a porta utilizada e a mensagem de sucesso. Se não ocorrer, troque o cabo para outra porta USB.
5. Uma vez conectado, no USB Burning Tool, carregue o arquivo ROM (*.IMG), e pressione o botão START. Será exibido o status de gravação que ocorre em menos de 3 minutos.
6. Ao finalizar, clique em STOP antes de desconectar o equipamento. Em seguida basta fechar o software, remover o equipamento e inicializá-lo normalmente conectado a fonte de energia e a TV.
Dica: O processo de gravação não se chama Burn a toa, o chipset esquenta ao receber gravação. O programa de gravação, vem com definição padrão de "temperatura" para operar entre 20~40 graus. Mas neste equipamento, precisamos subir para 20~80 para resolver erro de gravação, quando é exibido o Status incompleto em 97% sinalizado em vermelho. Ao subir a configuração de temperatura máxima permitida, você terá um Status verde com 100% de sucesso na maioria dos casos.
Click to expand...
Click to collapse
muito bom amigo, tenho um modelo igual a esse e queria dar uma tunada nele. O problema é que não consigo de forma nenhuma conectá-lo via usb. Já tentei vários cabos e funcionam com outros dispositivos, mas com o tx5 não. Acredito que seja problema do windows 11. Vou tentar gravar essa rom que enviou em um SD card. Abraço
**Moderator Edit: Translation provided**
Good morning gentlemen. I have a problem with my galaxy s9. After rooting (I'm using the original original rom), bluethooth later. It connects and disconnects devices very easily, and when my device is not rooted, the bluethooth is very stable. Example: When the mobile is rooted and I connect to my watch (which is also from samsung) I just need to move away from the mobile and the connection is already lost, so I have to reset the watch to factory settings, so that the device recognize it again. With headphones it's the same thing, and in both cases, the connection is lost even when the devices are close. When the cell phone is not rooted, the bluetooth connection is constant and efficient. Could someone explain to me what happened, or give me a solution to the problem? Another thing that also happens is, when I install a custom rom, it doesn't recognize my watch, it says that the connection is not possible.
Spoiler: Portuguese
Bom Dia senhores.
Estou com um problema no meu galaxy s9+. Depois de fazer o root (estou usando a rom original original), bluethooth depois.
Ele conecta e desconecta dispositivos com muita facilidade, e quando meu dispositivo não está enraizado, o bluethooth fica muito estável.
Exemplo: Quando o celular está rooteado e eu conecto no meu relógio (que também é da samsung), só preciso me afastar do celular e a conexão já está perdida, então tenho que redefinir o relógio para as configurações de fábrica , para que o dispositivo o reconheça novamente. Com fones de ouvido é a mesma coisa, e em ambos os casos, a conexão é perdida mesmo quando os aparelhos estão próximos.
Quando o celular não está enraizado, a conexão bluetooth é constante e eficiente.
Alguém poderia me explicar o que aconteceu, ou me dar uma solução para o problema?
Outra coisa que também acontece é, quando instalo uma custom rom, ela não reconhece meu relógio, diz que a conexão não é possível.
Hello @geraldo.caverzan
Please read the PM I just sent you.
Thank you.
V0latyle, XDA Staff
OK i'm see your mensagem. thanks.