Related
Hello!
I need some help and I know this is the place to find it!
I have searched for several days all over the internet trying to read and gather information, and I am coming up short.
I know Bruno Martins has posted some information on his blog on how to "readback" (backup) your current rom for your phone, but there is no information on how to flash the entire ROM package back to your phone (at least with regard to the errors you may receive).
Basically, I am looking for some help on how to backup one of my phones entire rom package and put it on my other phone that I messed up via the Smart Phone Flash Tool (the exact same model: Star Touch Diamond 2 B2000 MT6573).
The new phone works perfect, I have never touched it, my old phone which is the same model I deleted and formatted the system so I need to put the stock rom on.
I was able to do a "backup" of my new phone, but when i try to flash the preloader and uboot, etc, the sp flash tool says error loading file, or region too large with overlap.
Any help would be greatly appreciated!
By the way, my phone is not bricked, but I cannot access recovery! I was able to find and install another fully assembled rom to my phone and the phone does power on with lights, but it doesnt have the display driver I need so I cannot see anything.
The reason I flashed another rom was because the phone was essentially bricked and wouldnt do anything, and that was the only rom I could find on the internet that was a full package (preloader, uboot, system, etc) but isnt compatible with phone.
Anyhow, if I understand correctly I need to use hexadecimal calculator to find length of partitions of original phones rom, readback the files, somehow edit the preloader file? then flash them back to the old phone?
Please help!
I would love to make a tutorial of this method with pictures and possible errors for everyone if we could get this solved!
Please point me in the right direction!
And I wanted to thank BRUNO in advance for his hard work and help!!
have you tried the neutrino rom from notorious? its reallllly small around 50mb. you may be able to install that since it so small, then work your way back down? not too sure and i can say im no grandmaster but it might work!
***derp. neutrino... thats for atrix only. but hey same concept. maybe a small barebones rom will get you running enough to get things done properly.
Hello stokemonkey!
No, I have not tried the neutrino rom. My main goal is to take my working phone and copy the firmware to my other phone which is the same model. I attempted to flash a rom and then it didnt work out so well (phone still lights up, drivers are not compatible).
I all else fails I can attempt the neurtino rom (as long as you dont have to install from sd card zip file because I cannot!)
the neutrino is an Atrix 4G rom only, so you cant use it and it also needs to be installed via internal so its a no go either way. isnt your phone the china "htc" model? i dont have much user time on an htc so im not too sure what you can do?
again id try to find a barebones that you can flash the way you did with the rom that gave you errors. ill try to do some searching too and see what i can find. let me know if you get anything workin! and if there is someone else out there that can enlighten the both of us help would be appreciated!
and isnt yours like an evo 4g? maybe one of those roms will work?
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Anyone have any information? I have created a small visual representation of what I have been looking at and messing around with. Let me know!
Mt6573 phone flash help
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
CrimsonX said:
Hi all, I need help. I used sp flash tool and flashed the original files to my phone. I then restarted the phone and it would not go past the blue android screen. I let se overnight and still no success. After that i flash the boot and still no progress. Finally i flashed the uboot and now it only lights up but no picture at all. I have used sp flash to try to flash the entire file system back to the mt6573 but it will not flash the recovery, android, or sec_ro files. Can anyone help?
Click to expand...
Click to collapse
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Whistler011 said:
Same problem here except I can't flash dsp and preloader
UPDATE : flash worked finaly.my phone is fixed
Sent from my GT-P5110 using xda app-developers app
Click to expand...
Click to collapse
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
nsxtas said:
Please share how you did it, i'm in the same position with a MT6573 phone that are stuck on boot, and wont accept the preloaderfile
Click to expand...
Click to collapse
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
LeStonga said:
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
Click to expand...
Click to collapse
I'm using MTK6573 phone but could i know how do you start the "readback" using SP Flash. I'm not able to start it while holding VOL-UP button and connect the USB data cable into your phone. Are there any other methods to start it. Thanks for your help.
CM
Why don't you make a try with CyanogenMod?
LeStonga said:
Thanks for your response and suggestions. I will try to dish up a small tutorial with how far I can get in the backup/flashing process. I can check for an evo 4g rom and see what the specs are. The current rom I used i believe works, but doesnt have the video driver so the screen has no image. I believe each partition of ram has a set size so you can only flash a rom for the mt6573 chipset which will fit in the available space for each partition and also happens to contain the video, audio, bluetooth, etc drivers.
I have used SP Flash Tool and was able to backup all of the partitions of my working phone but the SP Flash Tool gives all sorts of errors when I try to load the files and flash them to my non-working phone.
The funny thing is that I downloaded files for a different phones rom and was able to flash those to the non-working phone, as mentioned in my previous post, which allows the phone to power on, but the phone doesnt work besides lighting up.
I know it is possible to make a backup of my good phone and flash that rom onto my non-working phone, I just dont know what I am doing wrong.
So far, this is what I have done . . .
1. Installed SDK tools for android
2. Obtained my scatter txt file by using command prompt
3. Used MTKRomStudio to open that file which tells me the addresses of all the partitions and their file sizes
4. Used SP Flash Tool V.2.11.29.00 to "readback" (backup) each individual rom file (preloader, uboot, bootimg, android, dsp, etc)
5. Confirmed the file sizes of each of the above files to what MTKRomStudio said the file size should be
6. Attempted to load these files into SP Flash Tool and get errors such as "partition too large, failed to load", or "partitions overlap".
7. I was able to open some of the partitions such as android, and usrdata but when attempting to flash I receive errors such as "dram error".
8. I was able to download an entire backup of all "readback" files for a different model phone, and each one of those files loaded fine and downloaded to my non-working phone.
9. Just to mention, my non-working phone was completely dead (no power up, no lights) before I flashed the random phone rom I found online, and now at least it powers up (lights up).
Click to expand...
Click to collapse
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
e-lime said:
I have a MT6575 phone and I have exactly your nr. 7 issue (BROM ERROR:S_DL_GET_DRAM_SETTING_FAIL(5054)). Were you able to get this working somehow? I am confident that the selected partitions are for this phone as I read them out myself. But flashing back won't work. Does anyone have any leads?
Click to expand...
Click to collapse
If you have the correct files use the newest version:
http://forum.xda-developers.com/showthread.php?t=1982587
It is easy to mess things up if you try random files.
MTK 6577 and SP Flash Tool
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
DollarStrawz said:
I too am also having problems with the flash tool. I am trying to help a friend bring his chinese note 2 clone back to life. He somehow got CWM onto the phone and the custom recovery seems to be functioning properly, but I cant find any sort of ROM file to flash in recovery.
Now I am going back and trying to restore the phone to factory using the flash tool. Installed the VCOM drivers, then went to load the scatter file we obtained from the factory (Bro Tech) it says the scatter file is incorrect format?
My question is: are there any roms we could try to flash on this phone from CWM or do we have to use the Flash Tool? I'm hoping since CWM seems to be working that I can simply flash an acceptable rom with that instead of trying to find a scatter file.
Maybe someone can suggest some ROMs to try flashing with CWM. The phone is: Goophone N2 7100 I believe. Thanks for reading, I really want to help him resurrect this interesting piece of copyright infringement (the phone looks amazingly like a Note 2 till you get close to it)
Evita Carbonized
GTab 2 7 AOKP'd
Click to expand...
Click to collapse
Create personalized file scatter for your device with MTK Droid. Here: http://forum.xda-developers.com/showthread.php?t=2160490
[email protected] said:
Same here.
Can somebody please post all the files .
I have an Alcatel one touch 918 not d/m/n
It`s the second phone that i have bricked.
Sharing it`s caring.
Click to expand...
Click to collapse
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Alecupid said:
Have a alcatel 4033a Phone Got bricked and needs to be flash any help on that ..? plz i need help
Click to expand...
Click to collapse
hi, i've made a mistake.
I've installed an odex version from a modified recovery(with dalvick cache). Can anyone help me?
Disclaimer
Code:
Neither Me Nor XDA Are Responsible If You Lose Your Job/Break Your Device.
Your Warranty Is Now Void
Downloads :
WIP
Instructions :
Extract The .rar
Open The Setup File And Install LG Flashtool
Right Click On The Shortcut Created On Your Desktop And Open File Location.
Copy The .dll Files From The DLL Folder To The Previously Opened Location And Replace The .dll In Flash Tool Folder If Any.
Open The Flashtool,Select The .dll Then The .tot/.bin File And You Are Ready To Flash The Firmware,Connect The Phone In Download Mode When Asked.
Note :
I Don't Know Whether It Works For N4 Converted Devices.I Had Successfully Flashed Stock .20 .bin File With It.But I Suggest To Use This Only When LGNPST Does Not Work/Fails To Flash The FW As For Me.Please Don't Perform Unwanted Experiments With Your Device Or It Will Result In A Hard Brick.
This Guide Was Originally Created By madmack @ Optimus G Pro Section So Thanks To Him.
I was Searching For The .dll File For Our Device And Found It So Decided To Create A Thread.And Those Who Are Thinking That The Required .dll Is The Same That We Use For LGNPST,NO,This Is A Different .dll
It Did Not Ask For Unlock Code When I Flashed The Stock JB FW.But As Posted By madmack there is A Possibility That It Can Ask For Your Unlock Code.So Proceed With Caution.
Again This Is A Alternate To LGNPST And Only I Have Successfully Flashed The Stock FW.It Is Recommended That Unless It Is Tested By 4-5 Experienced Users,Its A No Go For Noobs/New Users.
And Be Advised That This Process Will Wipe Your Internal Storage.
Enjoy!
Regards,
acervenky,
XPT
reserved
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Googler_1976 said:
Thanks for sharing.
Edit: There are many more things to do in his (madmack) thread... Did u follow them all? Or for us we do not need all those steps? Let us know before someone bricks.. I use LGNPST but if anyone tries this.. at least they have a better understanding. thanks again for sharing.
Click to expand...
Click to collapse
Changed The Status To WIP.
Will Search For The Info And Update The Thread Soon
Regards,
acervenky,
XPT
autoprime said:
just a heads up.. TeenyBin does not work in LG Flash. There are extra CRC checks which I haven't been able to bypass yet. This may change in the future.
also, not sure if this version of LG Flash is same as the newer one I use but I have to set the COM port to 40+ for LG flash to see my device.. altho maybe I'm missing something. I have to go into windows device manager and manually change the COM port used for the phone ( its in properties ).
LG Flash is no better or worse than LGNPST in my opinion. On the plus side.. there's no dll to register... and options are good
Click to expand...
Click to collapse
Yup.
Regards,
acervenky,
XPT
Download link is missing.
I've try to found the download link for the Lg Flash tool on this page, but i haven't. Can you fix it or explain? Thanks anyway.
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
cougar214 said:
Which .TOT and .DLL files will you be providing? I need the .DLL and .TOT file for, of course, the AT&T Optimus G E-970 US version! I flashed my wifes phone cause it boot looped and the .TOT used was SUPPOSED to be this file but it is the Korean FW. Now my wifes phone will not update via OTA because it changed her IMEI number. I need to get her phone back to stock 4.1.2 US VERSION!
Click to expand...
Click to collapse
Here is the file you need to get her phone back to STOCK U.S: http://downloads.codefi.re/g33k3r/LGE970AT-01-V20j-310-410-MAR-08-2013.zip I'm not sure on the DLL file, I use LGNPST so not sure if they are the same but attached it also just incase you can use it.. stock firmware file above is a .tot file so if you need to you can just change it to .bin if you need to.
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
cougar214 said:
Thank you blake but no. That is the fw file that turned her phone Korean. So may people are under the impression this is the stock US fw but it isn't. I even had another person here check their phone and his too in fact says "Lg Electronics Korea".
Click to expand...
Click to collapse
Where do you go check to see if its U.S or Korean?
All settings--> about phone -->phone Identity.
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
cougar214 said:
It's under settings-->about phone-->phone identity.
I had another person tell me that's normal because it's only the "manufacturer" info. Which im told this phone is manufactured in Korea. I don't know. All I do know is everyone is saying this is the stock fw for this phone but my wifes phone has changed. The start up screen is different and so is the shut down screen. Example, when her phone would shut down, she would get the AT&T logo and sound. After flashing this file she gets the blue circle and no sound. I do know that 4.1.2 is different depending on the region the phone is in. I don't know anything else that would explain this. Maybe this FW file WAS a different region but it was stripped out and converted somehow?
Click to expand...
Click to collapse
After a little checking I found out the same thing, It was normal as it was the place of manufacturer. I'm not sure what the problem might be but as far as I know that's the stock firmware for the phone.. You might try this one out http://www.androidfilehost.com/?fid=22901594685177912 you just boot into recovery do the normal wipes and flash through recovery, its supposed to be stock except for being rooted and as far as I know those are the only two stock files floating around for the phone...
Thanks Blake. Can you confirm for me that this phone will NOT get OTA updates if it's changed in any way, including rooting? It's what I was told by someone else. If that's the case then I guess there really is nothing wrong with the phone except those weird unexplained small changes.
I've got all the correct files download and I made it so far as to try to actually flash the phone, but it fails and gives me a wrong model number message because it's detecting my phone as a E960 (it's an E970). Any ideas? I had installed the latest CM11 ROM over some encrypted data and now I'm locked out (old encryption PIN doesn't work) and I can't restore it to stock.
can someone help me with a .tot or .bin stock for lg l70 d320n? cuz i"ve looked for it everywhere but couldn"t find anything
need help bad.
i got this phone from a friend and it originally had cm11 on it. the phone in question is the lg e970. i wanted to get back to stock. so i downloaded the correct firmware and added it to my external sd card. using twrp before i proceeded to wipe the phone via twrp. when it was finished i restarted the phone into twrp and went to install the stock firmware and i could not find my exsd card. twrp does not recognize it at all. so now im stuck with a phone with no os on it. i can ge into twrp and download mode, and when i just boot the phone it goes to lg logo and stays there. i need help in trying to figure out how to get stock firmware back on phone. i am used to samsung phones and odin. so im a noob when it comes to lg. i am very tech savy when it comes to computers. plzzzzzz any help would be great!!!!!!!! and appreciated
I can not add .tot file in LG flash tool
I have unrooted my lg g3 before on another computer. But i can't add the .tot file with my new computer. I am doing everything the same.
Does anyone have any ideas?
Hi all,
I am a newbie and don't know much. So please bear with me.
I was trying to root my Galaxy S5(SM-G900H) by using the tutorial given on http://forum.xda-developers.com/showthread.php?t=2696537 but the process did not go as planned as keep struck on recovery.img on odin3.10 so I googled and found that changing USB port will help so I take out the battery changed the port and try again but this time I soft-bricked the phone as odin struck on cache.img and now when i try to start my phone I get Firmware upgrade encountered. So now I again googled and found about unified toolkit and install it on my windows 10 ,now when i choose option 6 (i.e. flash stock boot image to your device) it says waiting for usb debugging to be enabled ,now I remember I turn USB debugging on but it is still struck here. Now what should I do? My parents gave this phone just a week ago and I am in deep trouble.
P.S.-I am only able go into the download mode not recovery mode.
Boot into Download Mode and use Odin to install the original firmware. Might require a factory reset after if still bootlooping. Here is a link to 6.0.1 from Sri Lanka https://mega.nz/#!YMAFhR4a!pZmf7OEWgzDzET1FLGsAOQ5XyVlvE8y4pJfB8KDNbMI . Any region firmware should work for the F model. If you want your specific one then check sammobile.com. I just linked to the other because it is a much faster download.
Problem encountred while installing original firmware
I tried to use Odin to install original firmware , I started the process but Odin got struck on sboot.bin (Also I read somewhere that whole process does not take more than 10 minutes). So please help me.
Which firmware did you try?
You might be able to use Kies to recover your device as well.
es0tericcha0s said:
Which firmware did you try?
You might be able to use Kies to recover your device as well.
Click to expand...
Click to collapse
I downloaded it from http://www.teamandroiders.com/samsung-galaxy-s5-sm-g900h-stock-rom-firmware/ with PDA: I9500XXUBOL2. I want to know one more thing as I am in India so should I use INU or INS?
ratcoder said:
I downloaded it from http://www.teamandroiders.com/samsung-galaxy-s5-sm-g900h-stock-rom-firmware/ with PDA: I9500XXUBOL2. I want to know one more thing as I am in India so should I use INU or INS?
Click to expand...
Click to collapse
Oh geez...no wonder it isn't working. i9500 = S4. Really gotta be careful with that kind of thing.
INU is for unlocked from the factory
INS is for phones from a carrier
Either one should work. As mentioned, with the G900h, any firmware should work that is for that model, no matter the region. Use the one I posted and change the language or grab the one for India from sammobile.com though it'll take an hour or 2.
Edit: I see that it was just mislabeled as i9500, but the download says g900h after all.
Were you on 5.1.1 or 5.0 before you started this process?
es0tericcha0s said:
Oh geez...no wonder it isn't working. i9500 = S4. Really gotta be careful with that kind of thing.
INU is for unlocked from the factory
INS is for phones from a carrier
Either one should work. As mentioned, with the G900h, any firmware should work that is for that model, no matter the region. Use the one I posted and change the language or grab the one for India from sammobile.com though it'll take an hour or 2.
Edit: I see that it was just mislabeled as i9500, but the download says g900h after all.
Were you on 5.1.1 or 5.0 before you started this process?
Click to expand...
Click to collapse
Well I downloaded another one from http://firmwarefile.com/samsung-sm-g900h the second one, before it all started I was on 5.0 and the link you give does not work anymore. Anyway I tried with the firmware with upper link. And Odin is struck with sboot.bin for more than an hour. And have no idea what's going on? So what should I do?
Also someone suggested to use Pit. Should I use it?
No, don't use the pit. Try the newer firmware for 6.0
es0tericcha0s said:
No, don't use the pit. Try the newer firmware for 6.0
Click to expand...
Click to collapse
So I downloaded the 3rd link from http://firmwarefile.com/samsung-sm-g900h for newer version and try Odin 11.2 with it. I try two times to flash the firmware first time it struck on sboot.bin and second time it just showed fails(I used Odin with administrative rights this time) .Please see the attached images. Please tell me what should I do now. I want to repair it ASAP.
Not sure. This is pretty standard stuff. Have used Odin 1000 times and haven't had that much trouble with it. Sorry.
es0tericcha0s said:
Not sure. This is pretty standard stuff. Have used Odin 1000 times and haven't had that much trouble with it. Sorry.
Click to expand...
Click to collapse
I think I should mention that the firmware I used was INS not INU and if you have a genuine link for version 6 for INU with fast download speed, please share it (different than sammobile because it has only fast speed only for premium users). Should I use PIT or try something else than Odin. Anything that might help please tell me. I have got this phone just a week ago and my parents are not gonna give me a new one so please help me.
I keep encountering sboot.bin error ,maybe there is a way to resolve it?
I'd just try to load TWRP and a custom rom at this point.
es0tericcha0s said:
I'd just try to load TWRP and a custom rom at this point.
Click to expand...
Click to collapse
Actually I have no idea what TWRP is so any link or anything that can help without ruining the situtation.
http://forum.xda-developers.com/galaxy-s5/development/rom-t3224562
es0tericcha0s said:
http://forum.xda-developers.com/galaxy-s5/development/rom-t3224562
Click to expand...
Click to collapse
I want to know one more thing on the above link there is a custom firmware and there is a custom ROM with bootloader and all. So should I flash custom firmware or use the instructions given on thread to flash custom ROM?
The custom rom does not include bootloader and modem. You will need to flash via Odin if you were not on the same firmware as the software is based off of. I would flash them anyway, to be safe. You can skip the root part as it is not need. Follow the instruction in post 2 for stock rom users minus the root part. Make sure to boot directly back into TWRP recovery before it attempts to boot. You can load rom on SD card and any additional add-ons you want. Plenty of youtube guides on how to use Odin to flash TWRP and such.
es0tericcha0s said:
The custom rom does not include bootloader and modem. You will need to flash via Odin if you were not on the same firmware as the software is based off of. I would flash them anyway, to be safe. You can skip the root part as it is not need. Follow the instruction in post 2 for stock rom users minus the root part. Make sure to boot directly back into TWRP recovery before it attempts to boot. You can load rom on SD card and any additional add-ons you want. Plenty of youtube guides on how to use Odin to flash TWRP and such.
Click to expand...
Click to collapse
Finally seen some progress, thank you very much. I successfully flashed TWRP recovery, but I got a couple of questions. Firstly I should flash ROM from recovery mode and then go to download mode to flash boot-loader and Modem files right? Should I flash ROM from SD card? And if this custom ROM causes problem is there a way to get to stock ROM? And is this custom ROM rooted or I have to root it via CF-Auto root or try anything else?
Rom might work without bootloader and modem. Just depends on your previous firmware. I would try and flash it though as it was recommended. Rom flash from SD card or internal. Either way should work. You will be able to go back to stock if you can find a firmware that works. It is already rooted.
es0tericcha0s said:
Rom might work without bootloader and modem. Just depends on your previous firmware. I would try and flash it though as it was recommended. Rom flash from SD card or internal. Either way should work. You will be able to go back to stock if you can find a firmware that works. It is already rooted.
Click to expand...
Click to collapse
Thank you very much.phone is working again with custom ROM.just one more thing if I upgrade from custom ROM what will happen?
:good::highfive::victory:
It should work to reflash the original firmware through Odin. Just get the one that matches your baseband version.
Consider one day you upset the devil and your phone is bricked by him, lets try to revive the phone from hell (at your own risk) :
Link to the OTA firmware's :
Click here for the links page
Important tools links:
[TOOL] Huawei Multi-Tool v8 by Team MT by inside!out
TWRP Honor 7X img
Stage 1
Download from here everything you need for the procedure - Download Folder Link
I am testing it on my BND-L21 firmware from BND-AL10
Downloading firmware (from topic). Full firmware must be more than 1.5Gb, all smaller is just
OTA Updates to the system.
After that we must download Huawei-MultiTool (future MT) version 8.x.x (link topic)
and downloading custom recovery. We will use TWRP for Honor7x (link topic)
Last we must prepare OTG Cable, SD Card more than 4Gb. On first stage that's all.
Stage 2
Go to MT and reboot phone to Fastboot mode (while phone off, hold "Volume -" and power)
If you did all correctly, you will see in the down right side your number and "Fastboot".
Now go in MT to the Bootloader and check the status. If you have already unlocked, skip this.
If you have locked phone, you must have IMEI and Huawei account. (if not please unlock your bootloader via the Huawei site)
After that, go to Recovery menu and choose our TWRP image in "Custom recovery" section and
type "Recovery". IMPORTANT!!! DON'T FLASH ERECOVERY, I DON'T HAVE THIS IMAGE!!!
After flashing recovery, we must turn off our phone.
Now we must to prepare base system image. In archive we have UPDATE.ZIP file. extract this
file to custom folder and open "Unbrick" in MT and choose "extractor". Open our file in extractor
and click right mouse key on empty space, choose extract all... and choose custom folder to
extracting.
Go to the folder and copy file VENDOR.IMG to the SD-Card (or USB with OTG). Turn on your
device in Recovery mode (Volume + and power), choose Wipe and Wipe ALL partitions! After
doing this, go to Install and choose "Install img", go to the SD-Card, and install VENDOR.img to
VENDOR folder (Important!)
After installing reboot phone again to Fastboot mode and connect to PC.
Now we must download .zip update to your region. We need this for using LTE (4G) in your country + Localization.
After downloading open .zip archive with our CUST file. archive must be called update_BND-
YOUR-NUMBER_hw_YOUR- COUNTRY.zip
From this archive we must extract .img file from root folder. It can be called cust.img CUST.img
version.img etc.
if name different from CUST.img rename it and put to the extracted UPDATE.app folder.
Last Stage 3
In MT go to Unbrick, choose our unpacked system with our CUST file and we must have at least
4/5 checkbox. And just type "UNBRICK" and wait. NOTICE: at moment of extracting system.img
it will be about 10-15 minutes. It's not a freezing of PC)
After good installing in log you will see like "All ok" Just reboot phone and you will see low level
factory reset, or something else like formatting. After formatting phone will reboot to the system.
That's all
Flashing Gapps method coming soon...
Password - 4pda for the update_full_bnd-AL10... Zip
Special Thanks to Kallibr44 my friend who helped me decipher everything. :highfive:
HIT THANKS IF I HELPED YOU IT MAKES ME HAPPY
We need a Full Firmware Package for L21,this is only Ota Updates.
letschky said:
We need a Full Firmware Package for L21,this is only Ota Updates.
Click to expand...
Click to collapse
there is a procedure used by EU users to completely revive the phone using the OTA but the procedure is too long which i haven't tried yet and is completely for users who have dead phones for now and yes obviously there is no official firmware available for Honor 7x but the user from an EU forum revived his phone so it is possible from the images.
though i made this thread for users who want to update their firmwares and not the procedure to flash a stock firmware since there is not one available yet but i can point to the thread where this user posted the procedure if someone wants to try. PM me
sid21 said:
i can point to the thread where this user posted the procedure if someone wants to try. PM me
Click to expand...
Click to collapse
Yes please....
fmotta said:
Yes please....
Click to expand...
Click to collapse
Sent reply.
There are teams who have unlocked a lot of stuff like flashing international FW,
flashing gapps on chinese fw, Automatic Call Recording, restoring the phone.
so i am in contact with them to make our phone better. lets keep our fingers crossed. :fingers-crossed:
i am waiting for firmware flashing to get it translated from one of the users.
This is the full recovery package right? Atleast for the Indian version?
TheDj408 said:
This is the full recovery package right? Atleast for the Indian version?
Click to expand...
Click to collapse
They arent recovery packages. they are full OTA which can be flashed for updating.
but there is a process to compile them into making them stock firmware packages but due to the long procedure i didnt post it here. rather wait for official stock firmware package.
sid21 said:
Hello Honor 7X Users, turns out there is firmware available for flashing for the AL10 and L21 variants
but i haven't tried them out and can post the procedure if someone needs it but all credit goes to PRO-TEAMMT for releasing them for us so now if we mess up we got official firmware's latest available to go back to.
I personally haven't tested any but i soon will.
Link to the firmware's :
Click here for the links page
Important tools :
[TOOL] Huawei Multi-Tool v8 by Team MT by inside!out
TWRP Honor 7X img
Steps : (Considering you have unlocked bootloader and flashed twrp)
1. Download the appropriate firmware as per your model (Link to the website given)
2. Clear Cache
3. Flash the firmware file
(Wait for the complete process to flash a firmware from scratch so that i can do it and confirm myself but if anybody tests before me let me know)
Refer to the thread by inside!out for any help till them if you want to try out
Click to expand...
Click to collapse
Hi
I am a New in Android world
I have honor 7x BND L21c185b101
And i rooted
Know exactly do this?
Step 3 how?
And the multi tool For what?
sid21 said:
there is a procedure used by EU users to completely revive the phone using the OTA but the procedure is too long which i haven't tried yet and is completely for users who have dead phones for now and yes obviously there is no official firmware available for Honor 7x but the user from an EU forum revived his phone so it is possible from the images.
though i made this thread for users who want to update their firmwares and not the procedure to flash a stock firmware since there is not one available yet but i can point to the thread where this user posted the procedure if someone wants to try. PM me
Click to expand...
Click to collapse
Can I have the procedure link?
I ordered a 7X from AliExpress.
I also own an Honor 5X & errrmmmm.. I'm not a developer rather still a learning buildbot ? still I want to take part in bringing up LOS or AOSP for Honor 7X. So we can work on it together if you want. ?
Cheers!
P.S. Belated Merry Christmas.
tootysa said:
Hi
I am a New in Android world
I have honor 7x BND L21c185b101
And i rooted
Know exactly do this?
Step 3 how?
And the multi tool For what?
Click to expand...
Click to collapse
exactly what you want to do?
this is to update to the latest firmware. if you have the latest firmware you dont need it.
the multi tool is used to flash stock with a procedure which is only needed to return to stock or else theres no need for it for the most part..
mumith3 said:
Can I have the procedure link?
I ordered a 7X from AliExpress.
I also own an Honor 5X & errrmmmm.. I'm not a developer rather still a learning buildbot ? still I want to take part in bringing up LOS or AOSP for Honor 7X. So we can work on it together if you want.
Cheers!
P.S. Belated Merry Christmas.
Click to expand...
Click to collapse
PM Sent kindly check.
sid21 said:
Hello Honor 7X Users, turns out there is firmware available for flashing for the AL10 and L21 variants
but i haven't tried them out and can post the procedure if someone needs it but all credit goes to PRO-TEAMMT for releasing them for us so now if we mess up we got official firmware's latest available to go back to.
I personally haven't tested any but i soon will.
Link to the firmware's :
Click here for the links page
Important tools :
[TOOL] Huawei Multi-Tool v8 by Team MT by inside!out
TWRP Honor 7X img
Steps : (Considering you have unlocked bootloader and flashed twrp)
1. Download the appropriate firmware as per your model (Link to the website given)
2. Clear Cache
3. Flash the firmware file
(Wait for the complete process to flash a firmware from scratch so that i can do it and confirm myself but if anybody tests before me let me know)
Refer to the thread by inside!out for any help till them if you want to try out
Click to expand...
Click to collapse
HI I wanna know many things:
1-if I can constantly update the 7x with the application (or the software on PC, is the same) "Firmware Finder" even if I don't recive the official OTAs (because I want to root my device)
2-if its possible upgrade the system via OTA (or Firmware finder etc...) when the device is rooted
3-is dangerous root the Honor 7x?
4-if I can upgrade the system when the device Is rooted via the software HiSuite
5- how/where can I do/find and restore a Nandroid Backup for my phone
6-where I can find a local/manual update (UPDATE. APP) for the 7x (in case a brick the phone)
7-how can i UNBRICK my phone I case of brick
(sorry for my bad english?)
PLEASE HELP ME??
Thanks
Lambo™ said:
HI I wanna know many things:
1-if I can constantly update the 7x with the application (or the software on PC, is the same) "Firmware Finder" even if I don't recive the official OTAs (because I want to root my device)
2-if its possible upgrade the system via OTA (or Firmware finder etc...) when the device is rooted
3-is dangerous root the Honor 7x?
4-if I can upgrade the system when the device Is rooted via the software HiSuite
5- how/where can I do/find and restore a Nandroid Backup for my phone
6-where I can find a local/manual update (UPDATE. APP) for the 7x (in case a brick the phone)
7-how can i UNBRICK my phone I case of brick
(sorry for my bad english?)
PLEASE HELP ME??
Thanks
Click to expand...
Click to collapse
1) ???
2) Not sure there is always a chance of bricking
3) Yes, if you don't know what you're doing. No if you're not going to be flashing anything.
4) You should be able to and also refer to #1.
5) None available
6) None available
7) You can't, no stock image released = no procedures to unbrick
Soapy! said:
1) ???
2) Not sure there is always a chance of bricking
3) Yes, if you don't know what you're doing. No if you're not going to be flashing anything.
4) You should be able to.
5) None available
6) None available
7) You can't, no stock image released = no procedures to unrbcik
Click to expand...
Click to collapse
1- can i upgrade the system at every update (when the device is rooted) with Firmware finder many times even if I don't recive the notification on the phone of the update (or if the device updater cannot find it)?
2-ok but if do all right steps you cannot brick the phone, no?
3-ok i only wanna unlock bootloader, flash twrp and root the phone. If I do all right steps there are no risks, no?
4-i don't understand it (in hisuite there s the option that says "Update device". With the device rooted can I update the phone with this software?)
5-ok but can I do one with a custom recovery, no?
6-ok so we just have to wait, no?
7-ok. Same thing of the - 6 (we have to wait for the UPDATE.APP for the 7x to be able to UNBRICK the phone in case it could happen, no?)
Sorry for my bad English and thanks for the answers?
Lambo™ said:
HI I wanna know many things:
1-if I can constantly update the 7x with the application (or the software on PC, is the same) "Firmware Finder" even if I don't recive the official OTAs (because I want to root my device)
2-if its possible upgrade the system via OTA (or Firmware finder etc...) when the device is rooted
3-is dangerous root the Honor 7x?
4-if I can upgrade the system when the device Is rooted via the software HiSuite
5- how/where can I do/find and restore a Nandroid Backup for my phone
6-where I can find a local/manual update (UPDATE. APP) for the 7x (in case a brick the phone)
7-how can i UNBRICK my phone I case of brick
(sorry for my bad english)
PLEASE HELP ME
Thanks
Click to expand...
Click to collapse
1. yes you can if the app supported honor 7x with their firmware but it doesn't yet, use twrp
2. yes you can upgrade via flashing it in twrp
3. unlocking bootloader itself is dangerous let alone rooting since your waranty is gone since there is still no sign of official stock firmware
4. same as no. 1 ans
5. if u flashed twrp you can do your nandroid backup which can be later restored anytime so it will be obv on the phone at that time
6. manual or local update? in the op main post i guess? by opening the link?
7. Still no official firmware and the procedure i am aware of consists of turning the official chinese firmware into normal by changing settings and stuff which is a long procedure so probably if u brick, u r stuck until honor decides to release stock firmware
by the looks i guess you have no clue about phone flashing, its better you dont try anything until there are guides properly made for newbies. :silly:
sid21 said:
1. yes you can if the app supported honor 7x with their firmware but it doesn't yet, use twrp
2. yes you can upgrade via flashing it in twrp
3. unlocking bootloader itself is dangerous let alone rooting since your waranty is gone [emoji14] since there is still no sign of official stock firmware
4. same as no. 1 ans
5. if u flashed twrp you can do your nandroid backup which can be later restored anytime so it will be obv on the phone at that time
6. manual or local update? in the op main post i guess? by opening the link?
7. Still no official firmware and the procedure i am aware of consists of turning the official chinese firmware into normal by changing settings and stuff which is a long procedure so probably if u brick, u r stuck until honor decides to release stock firmware
by the looks i guess you have no clue about phone flashing, its better you dont try anything until there are guides properly made for newbies. :silly:
Click to expand...
Click to collapse
Thanks lol [emoji23]
Sent from my BND-L24 using Tapatalk
I rooted my 7X(Al10) version successfully but while performing the reset, deleted the system file also by mistake. There is no TWRP backup. Is there any way to get the stock OS files again to flash in TWRP ? Or does anyone have a backup file they made that they can share? I tried Huawei e-recovery too, but that gets stuck at 'unable to get package info'. The people at the service centre can't think of any other method to restore the phone, except changing the motherboard. When is the official stock file expected to be available?
GC95 said:
I rooted my 7X(Al10) version successfully but while performing the reset, deleted the system file also by mistake. There is no TWRP backup. Is there any way to get the stock OS files again to flash in TWRP ? Or does anyone have a backup file they made that they can share? I tried Huawei e-recovery too, but that gets stuck at 'unable to get package info'. The people at the service centre can't think of any other method to restore the phone, except changing the motherboard. When is the official stock file expected to be available?
Click to expand...
Click to collapse
I have a TWRP backup not sure if it'll work, https://drive.google.com/file/d/1EntdgNwcJSOTZizqt_W-yWfkd3-YVmCm/view?usp=drivesdk
It's a zip file with 2 backup folder, one with boot and system and one with vendor
Edit: pls thank if it worked, so I have an indicator of the effectiveness
GC95 said:
I rooted my 7X(Al10) version successfully but while performing the reset, deleted the system file also by mistake. There is no TWRP backup. Is there any way to get the stock OS files again to flash in TWRP ? Or does anyone have a backup file they made that they can share? I tried Huawei e-recovery too, but that gets stuck at 'unable to get package info'. The people at the service centre can't think of any other method to restore the phone, except changing the motherboard. When is the official stock file expected to be available?
Click to expand...
Click to collapse
I am waitinig for the official stock file since two weeks now, because I deleted accidently the OS from my phone -_-
I think we can wait several weeks again...
---------- Post added at 12:04 PM ---------- Previous post was at 12:03 PM ----------
Jan.Pul said:
I have a TWRP backup not sure if it'll work, https://drive.google.com/file/d/1EntdgNwcJSOTZizqt_W-yWfkd3-YVmCm/view?usp=drivesdk
It's a zip file with 2 backup folder, one with boot and system and one with vendor
Click to expand...
Click to collapse
Thanks! I will try on my bricked phone
sid21 said:
1. yes you can if the app supported honor 7x with their firmware but it doesn't yet, use twrp
2. yes you can upgrade via flashing it in twrp
3. unlocking bootloader itself is dangerous let alone rooting since your waranty is gone since there is still no sign of official stock firmware
4. same as no. 1 ans
5. if u flashed twrp you can do your nandroid backup which can be later restored anytime so it will be obv on the phone at that time
6. manual or local update? in the op main post i guess? by opening the link?
7. Still no official firmware and the procedure i am aware of consists of turning the official chinese firmware into normal by changing settings and stuff which is a long procedure so probably if u brick, u r stuck until honor decides to release stock firmware
by the looks i guess you have no clue about phone flashing, its better you dont try anything until there are guides properly made for newbies. :silly:
Click to expand...
Click to collapse
1. In the app firmware finder there are firmwares for the phone but how can I flash a official firmware (OTA I mean) if there are no one (or how can I flash a firmware finder Update)?
2. Same thing in -1 (I mean)
3. Ok. Now we have to wait the official stock firmware, no? (i don't understand this answer, please write it in another way)
4. I don't understand it
5. Okok (obv? Sorry I'm Italian hahaha)
6. It's not the same thing local or manual? Write it in another way please hahaha google translate doesnt help me?
7. Okok, So if I don't use your method I only have to wait that honor release the official stock firmware (UPDATE. APP). And for greater security it's better wait it before to root and unlock bootloader etc, no?
Anyway, I have an idea of what flashing is, in fact every device I have (they are all Samsung, so that's why I'm disoriented) is completely modified. The fact is that I dont have much experience (I'm 14 years old) with non-Samsung devices, in fact my honor 7x I received for Christmas and for the hurry and the want to modify it, I would like to know all these things.
Thank you
---------- Post added at 02:25 PM ---------- Previous post was at 02:23 PM ----------
k0pernicus said:
I am waitinig for the official stock file since two weeks now, because I deleted accidently the OS from my phone -_-
I think we can wait several weeks again...
---------- Post added at 12:04 PM ---------- Previous post was at 12:03 PM ----------
Thanks! I will try on my bricked phone
Click to expand...
Click to collapse
OK thanks I'll keep it aside in case of brick
I would recommend everyone to not do experiments over your phone to try and root and flash random stuff..
they only have official chinese firmware for flashing so its better to wait for the official firmware for non chinese version.
the method which i know of to flash on the phone is for people with flashing knowledge cz the procedure is not simple and secondly even i have been flashing my phone for many years on various devices yet i havent got the guts to root this first honor device cz their partitions are different and somewhat secured so dont play with it.
wait for the official firmware for your respective devices. maybe they will straightaway launch the oreo firmware.
I have a brand new Galaxy A21 (SM-S215DL). In Developer Options, there is NO OEM Unlock toggle (not even a grayed out one; it simply does NOT exist anywhere in settings). I have tried several different variants of the date/time trick to try to get it to appear, and none of them worked. But while in Download Mode, KG Status is shown as `CHECKING`, so doesn't that mean it should at least be visible? Do I even need to unlock my bootloader? Is it even possible?
Using Frija, I managed to get what I believe to be the correct stock firmware for my device. I also grabbed both of the latest official and patched versions of Odin. Flashing the stock firmware works, but flashing the patched Magisk AP fails with an AUTH error for file `vbmeta.img`, which leads me to believe that I actually DO need to unlock my bootloader... but if that's the case, I'm having trouble figuring out how to do so without the OEM toggle.
Is there anything else can I try?
SpectreCular said:
I have a brand new Galaxy A21 (SM-S215DL). In Developer Options, there is NO OEM Unlock toggle (not even a grayed out one; it simply does NOT exist anywhere in settings). I have tried several different variants of the date/time trick to try to get it to appear, and none of them worked. But while in Download Mode, KG Status is shown as `CHECKING`, so doesn't that mean it should at least be visible? Do I even need to unlock my bootloader? Is it even possible?
Using Frija, I managed to get what I believe to be the correct stock firmware for my device. I also grabbed both of the latest official and patched versions of Odin. Flashing the stock firmware works, but flashing the patched Magisk AP fails with an AUTH error for file `vbmeta.img`, which leads me to believe that I actually DO need to unlock my bootloader... but if that's the case, I'm having trouble figuring out how to do so without the OEM toggle.
Is there anything else can I try?
Click to expand...
Click to collapse
I also have the Samsung A21 from T Mobile (SM-A21UZKATMB). The phone is unlocked by T Mobile but there is no OEM bootloader unlock button under the Developer mode. Changing the date (forward and backward in time), then run the software update did not solve the OEM bootloader unlock button problem. I suspect the carrier (T Mobile) has disabled this function. You will need to unlock the bootloader to install the stock firmware.
To those who have enabled the OEM bootloader in the A21. Is your phone locked to a carrier in the USA like Verizon or T Mobile?
I also have the SM215DL, using straight talk utilizing verizon service, I also cannot unlock the bootloader. Everything you guys did, I did. Nothing worked.
samsung has done this to all A series phones intended for the U.S. from what i understand
Where there's a will, there's a way... someone has messed with my phone too do doesn't that mean that they're altering the data/data partition to r/w. Did you guys try fastboot flashing unlock vs. fastboot oem unlock. I'm going to contact Samsung about this and let u all know what's up.
And also why would there be a usb debugging port if this phone can't be modded? Idon't know the answer but maybe someone more expediency could come in and help us out. I also wonder if the flash_image command or just dd it would bypass it?
... there is NO way, to root the A21(s), see here: https://forum.xda-developers.com/t/root-possibility.4130739/page-12#post-84944589
MaBo2020 said:
... there is NO way, to root the A21(s), see here: https://forum.xda-developers.com/t/root-possibility.4130739/page-12#post-84944589
Click to expand...
Click to collapse
I confirm that I have rooted my A21S sucessfully using this modified magisk (U3 Rom). No need to patch the whole AP.tar file, just patch boot.img file only. I upload my patched boot.img for those who need it. Just flash it via odin in AP slot. Thank you very much @grccorps.
https://forum.xda-developers.com/attachments/boot-tar.5299081/
thatha said:
I confirm that I have rooted my A21S sucessfully using this modified magisk (U3 Rom). No need to patch the whole AP.tar file, just patch boot.img file only. I upload my patched boot.img for those who need it. Just flash it via odin in AP slot. Thank you very much @grccorps.
https://forum.xda-developers.com/attachments/boot-tar.5299081/
Click to expand...
Click to collapse
... exactly Step-by-Step, how u do it with downloadlinks of all Software, what u used !
Many Peoples writes, that they have rooted the A21s, but no one shows, how ! With the newest Firmware u cant rooted the Phone, because there is no working TWRP, SuperSU or MAGISK - Version out for this Phone !
MaBo2020 said:
... exactly Step-by-Step, how u do it with downloadlinks of all Software, what u used !
Many Peoples writes, that they have rooted the A21s, but no one shows, how ! With the newest Firmware u cant rooted the Phone, because there is no working TWRP, SuperSU or MAGISK - Version out for this Phone !
Click to expand...
Click to collapse
Extract boot.img from AP.tar, then use modified-magisk to patched it
... this Methode is not working, i try it many Times, no RootAcess ! Again: if u have newer Firmware on this Phone (End 2020 - until now) u cant root this Phone ! Maybe on ure Phone an older Firmware ...
And this is my U5 patched boot.img
MaBo2020 said:
... this Methode is not working, i try it many Times, no RootAcess ! Again: if u have newer Firmware on this Phone (End 2020 - until now) u cant root this Phone ! Maybe on ure Phone an older Firmware ...
Click to expand...
Click to collapse
I have just made a post here, you can try it
[SHARING] HOW TO ROOT A21S STOCK ROM WITH MAGISK
Hello friends I just want to share how to root A21S stock rom in case anybody needs it: 1. Unlock bootloader 2. (On PC) Extract boot.img.lz4 from AP...tar file, then copy it to phone 3. (On phone) Install ZArchiver to extract boot.img from...
forum.xda-developers.com
... and u shure, it its for the A21s or for A21 ?
The only hope of getting root on this phone is if you find a Dev who's interested enough to build a bootstrap recovery. I've not looked at the firmware & have no idea if there's an exploit that would work for that purpose.
Bootstrap recovery was the only way of getting root/custom recovery back in the days of Motorola D2 & Droid X, the original Droid X. Motorola was THE phone for development... Liberty ROM, Gummy ROM, Simply Stunning, etc.
I would not hold out hopes for that to happen here.
Peace - MS
Seriousfreedom said:
samsung has done this to all A series phones intended for the U.S. from what i understand
Click to expand...
Click to collapse
No, Samsung has done this to ALL North American models ever since the Galaxy S8. The bootloaders are not user-unlockable, like they are on international models. However, some models can be rooted via a software exploit if they're running very old firmware, or some models can even be bootloader unlocked via special files, if their firmware version is old enough
SpectreCular said:
I have a brand new Galaxy A21 (SM-S215DL). In Developer Options, there is NO OEM Unlock toggle (not even a grayed out one; it simply does NOT exist anywhere in settings). I have tried several different variants of the date/time trick to try to get it to appear, and none of them worked. But while in Download Mode, KG Status is shown as `CHECKING`, so doesn't that mean it should at least be visible? Do I even need to unlock my bootloader? Is it even possible?
Using Frija, I managed to get what I believe to be the correct stock firmware for my device. I also grabbed both of the latest official and patched versions of Odin. Flashing the stock firmware works, but flashing the patched Magisk AP fails with an AUTH error for file `vbmeta.img`, which leads me to believe that I actually DO need to unlock my bootloader... but if that's the case, I'm having trouble figuring out how to do so without the OEM toggle.
Is there anything else can I try?
Click to expand...
Click to collapse
Mine is rooted. But you have to buy a token.
o.class.jav said:
Mine is rooted. But you have to buy a token.
Click to expand...
Click to collapse
what token??
[email protected] said:
what token??
Click to expand...
Click to collapse
The one generated by the SamPwns steady.bin flash.
{Mod edit: Quoted post removed}
and where does one get 'TWRP' for the Samsung Galaxy A21S?? Thanks for the post its very detailed with very clear instructions, and i agree with you this is the tried and tested and perfect way of rooting your phone, only problem is that this is an unperect world a world where 'TWRP' for the SM-A217F does not exist
I just received a refurbished SM-S215DL (A21,) not as my provider's solution to the VoLTE soon to be required for 4G devices thing and right now it's a pretty severe downgrade for me since it lacks a lot of basic functionality I'm used to from my 2017 phone running LineageOS. Obviously it's pretty unlikely or probably outright impossible to ever see a real LineageOS ROM for this thing (and even if someone ever does it probably would be insanely unstable or incomplete,) but if I could at least root it (even if I have to manually patch or something) it would really help me out a lot. Has just nothing really been found short of sending some unknown person online some very very key device details and money (which I don't have or I'd be buying something else anyway)? (Also kind of suspicious that whatever method they're using isn't something available to the public anyway...)