Interrupted encryption and now impossible to install any MIUI based rom - Xiaomi Poco F1 Questions & Answers

Hi all, I'm experiencing a strange issue but very annoying and I hope that I can find some help with the expert out there. I installed a MIUI 11 based rom and everything was almost perfect. I had to encrypt my phone because it's a company phone and they want encrypted phones. When I was prompted to to so I've followed few indication and the phone restarted and it stayed for ages with the boot logo apparently doing nothing...there was no signal of life but maybe it was just encrypting in the background and I didn't know...other times I encrypted my data I could see a timer but not this time. Well, as a matter of fact I've force restarted the phone and from that moment on all my problems started. After few seconds of bootlogo a message errore popped up saying that I had interrupted the encryption process and that I would have needed a factory reset to restart phone...and so I did...but no way, the same message was always appearing...tried also a full format, factory reset, repairing file system...NO WAY! still the same message. I was panicking...then I've decided to install an AOSP based rom and BOOM, the phone booted up and I had my phone again...Then, proud of this success, I've decided to retry installing MIUI 11; so I made a clean flash (formatting data including internal storage) and, WTF, after few seconds the same [email protected]#@#ing errore message that I had interrupted the encryption process and that I should have made a factory reset, that obviously didn't worked, exactly like the first time.
So, forgive my looong message, but what the hell is going on here??? How is possible that this stupid error message survives to all the full wipe I made including internal storage??? how the hell can I get rid of it? It seems I can't install any of the MIUI rom...tried a couple but same result...
please help...I very much prefer MIUI11 than any other AOSP or similar ROM...
thx
andrea

twrp ,Mount vendor, wipe vendor system data internal.
Try to flash latest vendor only first , then flash the whole rom.
This might help bcuz vendor makes phone encrypt itself.

Related

Encryption unsuccessful random! Need help. Galaxy S3 CM 12.1

Sup guys, so i just had a really strange problem that popped out randomly, i was watching a youtube video and i had to help a person quickly and when i came back just a minute later i saw my phone showing encryption unsuccessfull when i pressed the power button to turn my screen on. Well it said to factory reset my phone, i don't store any important data on my phone anyways so i just went for it, and it restarted went to my TWRP recovery and tried factory reseting it, to no success. It basically failed to access /data/ and other directories and i can't see any files in them through recovery. And so i can't even factory reset it, i can't install a ROM cause the partition is corrupt i assume. How can i "unbrick" this? I was running the good old Temaseks CM 12.1 ROM, has been working fine for a looong time. My PC recognizes the phone but i can't access any data, it just shows that it's connected, odin doesn't recognize it.
Can somebody help me please ? I use my phone alot and it's really important.

Wiko Fever No Command after update

Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Same issue here... Finally decided to upgrade the system from stock firmware, and got "error" when it rebooted the phone. Then "no command".
Darknezz89 said:
Hi guys please help me i need to have my phone working back |:.... today i updated my wiko fever 4g but i got an error... now when i boot it an android icon shows with "no command." text. Tryed with v.39 program on wiko website but its not working for me... when arrow becomes green download wont start.
I'm thinking to recover system fom sd card but i cannot find roms please help me |: thanks in advance
Click to expand...
Click to collapse
I solved my issue by restoring Lollipop (v.39) with the tool from the wiko website and then performing the update again; the phone started again (at v.41) and I was able to download Marshmallow from the next system update.
Issue was probably caused by some configuration or application.
Still slowly downloading Marshmallow now, so cannot say anything about the next update, but I guess that will go well, since the phone is reset now.
Just to follow up: Marshmallow is working fine on my Wiko Fever, much better than Lollipop. Amazing update.
Instructions for others after having read some comments from other people experiencing issues with the upgrade:
- BACKUP all your data before upgrading from Lollipop to Marshmallow, as if you would buy a new phone; I luckily did, as I wanted to set the microSD from removable to internal
- remove the microSD and (after having a backup of all your data as per step above) format the card as FAT32 on your PC; better to have a clean MicroSD card for after the upgrade I think
- reboot the phone in recovery mode and do a: wipe cache+reset to factory settings
- once the phone is reset and started, proceed with upgrading to Marshmallow
- don't know if needed after the upgrade to do an additional wipe cache+factory settings reset, doesn't harm to do it though
- be unhappy for the hours lost in restoring the phone data + apps + reconfigure everything
- be happy of the improved phone software
Questions upon questions.
So, i got the notification for the update last week, and i saved it until today to install it. The file downloaded was just 7 mb, i had enough battery for the intallation of the update (30% recomended by the software), something got messed up and an error message with the dead android character appeared. I know i lost all my things contacts and sd card... tried to hard reset the damn thing and nothing. I already googled the problem and i found nothing similar to what i get, i'm stuck in the recovery screen and the phone doenst shut down, every time i force it, it just boots back up after 15 30 seconds. I got to be honest i tought it was just another update but aparently its a "new" operating androind system. They could have told me with a update log or something...

I can't access my Huawei Phone due to "Encryption unsuccessful"

I'm using a stock Huawei Phone with no major modifications (no root, no custom roms and stuff, changed into a custom launcher tho). Suddenly today I can't access my phone because somehow it has partially encrypted itself or something and now I can't even boot my phone, let alone access my data. Here I should point out that at no point did I try to encrypt my data so I'm baffled why something like this should happen. Anyway my phone said I have to factory reset my data and it took me to this recovery screen with the option to wipe data/factory reset and wipe cache partition. I do so and then reboot. But the same thing keeps happening. I wiped data a few times to no avail. I removed my SD card but it didn't work either.
I can't open my phone anymore. The data on my phone isn't that important - most of it backed up. Here's my phone specifications-
Model: Huawei Y625-U32 (Android system recovery says its Y625-U32V100R001C567B105 if it helps)
Os: Android 4.4
I can't remember the other specs, but here's the product page on Huawei: consumer.huawei.com/pk/mobile-phones/tech-specs/huawei-y625-pk.htm
It seems that I can apply updates to my phone from external sources and there is a firmware update on my phone (consumer.huawei.com/pk/mobile-phones/support/downloads/huawei-y625-pk.htm). Will this fix my phone?
I don't know why something like this is happening. Should I be worried that this is the work of a virus?
My phone is a little obscure so it's hard to find help online. I would really appreciate your help guys.

Can't find misc partition in J7 prime recovery option

Hello all,
I have been given a phone(Galaxy J7 prime, SM-G610F) by a friend. It has official android nougat firmware and I believe he has not messed up his phone because he doesn't know much about such things. The complaint is that whenever I switch on the phone, so many services keep stopping and I get those stupid popups. I tried to factory reset the phone from settings menu, but whenever phone resets and comes to normal state, everything is like before. Nothing has been wiped out. All the data and apps are still there. I tried to wipe cache partition and format using recovery, but it says can't find /misc partition and the process fails. Sometimes, I get no command while booting. I flashed stock firware using odin. Even when odin says pass, the phone still starts like before. No new change. I don't understand what is wrong with the phone.
Do you guys have any possible solution to help my poor friend?

bootloop problem after wipe date / no root

hello guys
i hv a weird problem i was using my phone and suddenly the phone crashes and keeps rebooting so i desided to wipe data and after wiping it still boot looping and much worse a reset phone screen pops up after every wipe data and keeps showing me this error
Encryption Unsuccessful Encryption was interrupted and can't complete. As a result, the data on your phone is no longer accessible. To resume using your phone, you need to preform a factory reset. When you set up your phone after the reset, you'll have an opportunity to restore any data that was backed up to your Google account.
note ( it's non rooted phone ) / hope you guys help me
That's a big problem. Download the MIUI ROM from their website, flash it via Mi Flash Tool. There are many tutorials there that can help you.

Categories

Resources