Hello. I have already asked on Reddit and Quota but I have not received an answer. I have the original global MIUI 10.3.8 with official TWRP and root by Magisk. I received a notification on the device that an update to MIUI 11 is available. As for root, I didn't make any changes to the system. I only gave Administrator permissions for four applications. What do I have to do to install the official MIUI 11 update?
Just download the .zip of MiUI 11 and flash as usual. Dirty flash works, don't need to wipe anything. Magisk 20.0 is working, no Disable Force Encryption needed. I tested with the miui.eu ROM...
Sent from my POCOPHONE F1 using Tapatalk
felipeap said:
Just download the .zip of MiUI 11 and flash as usual. Dirty flash works, don't need to wipe anything. Magisk 20.0 is working, no Disable Force Encryption needed. I tested with the miui.eu ROM...
Click to expand...
Click to collapse
Thanks! I need Magisk uninstaller for something?
Desmowiecki said:
Thanks! I need Magisk uninstaller for something?
Click to expand...
Click to collapse
For upgrade no, you don't. Make sure you have the latest TWRP (3.3.0.0 or 3.2.3.2) as some people are having issues. I didn't tested on official Global zip, only with the miui.eu variant
Sent from my POCOPHONE F1 using Tapatalk
felipeap said:
For upgrade no, you don't. Make sure you have the latest TWRP (3.3.0.0 or 3.2.3.2) as some people are having issues. I didn't tested on official Global zip, only with the miui.eu variant
Click to expand...
Click to collapse
TWRP will stay? After uploading the rom do not restart the device and do a TWRP flash? I have 3.3.0.0. Another thing is that I use global ROM.
Desmowiecki said:
TWRP will stay? After uploading the rom do not restart the device and do a TWRP flash? I have 3.3.0.0. Another thing is that I use global ROM.
Click to expand...
Click to collapse
Do you have experience on flashing custom roms on TWRP?! Maybe you should do some reading first...
But it's just a matter of download the miui.eu version of MIUI 11 at https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv11/ and than install via TWRP. You'll need to download the Magisk TWRP Zip and install it as well.
Sent from my POCOPHONE F1 using Tapatalk
felipeap said:
Do you have experience on flashing custom roms on TWRP?! Maybe you should do some reading first...
But it's just a matter of download the miui.eu version of MIUI 11 at https://sourceforge.net/projects/xi...files/xiaomi.eu/MIUI-STABLE-RELEASES/MIUIv11/ and than install via TWRP. You'll need to download the Magisk TWRP Zip and install it as well.
Click to expand...
Click to collapse
The last question. Install Magisk after starting a new rom or still being in TWRP?
Desmowiecki said:
The last question. Install Magisk after starting a new rom or still being in TWRP?
Click to expand...
Click to collapse
I installed right away before reboot and it worked... I had to download the APK of Magisk Manager myself after, it won't install for some reason
Sent from my POCOPHONE F1 using Tapatalk
Okay. Upgrade to MIUI 11 and everything works together with Magisk v20 and Manager App. Thank you for your help.
Related
New update, Mi8 8.9.11 Global Beta Base on P.
http://bigota.d.miui.com/8.9.11/miui_MI8Global_8.9.11_4f8d477c96_9.0.zip
Its stable enough?
Enviado do meu MI 8 através do Tapatalk
Any noticeable changes? Notification icons?
If i flash this through Updater will I still get beta updates this friday?
I did not try this yet, I'm on xiaomi.eu and I don't want to reset the phone. Maybe this week we'll get Xiaomi.eu piese, sorreh
This is a closed beta, I don't think you'll get updates or maybe I'm wrong..it worth a try
Do you have anti rollback arb?
Flashable through TWRP?
PolariSz said:
I did not try this yet, I'm on xiaomi.eu and I don't want to reset the phone. Maybe this week we'll get Xiaomi.eu piese, sorreh
This is a closed beta, I don't think you'll get updates or maybe I'm wrong..it worth a try
Click to expand...
Click to collapse
Agree. If you're running MIUI, better run (&/or wait for) Xiaomi.eu's MIUI
I just updated from Miui10 8.9.7 (8.1) to 8.9.11 (9.0) with booting TWRP through fastboot and using TWRP to update. Worked great, no need to wipe data, kept everything as was!
Agimax said:
I just updated from Miui10 8.9.7 (8.1) to 8.9.11 (9.0) with booting TWRP through fastboot and using TWRP to update. Worked great, no need to wipe data, kept everything as was!
Click to expand...
Click to collapse
So flashing through TWRP is no problem?
Everlite92 said:
So flashing through TWRP is no problem?
Click to expand...
Click to collapse
i booted from fastboot to flash it (im on stock recovery), but yeah no problems at all, and kept the data.
Only to beta with signed account?
any solution to flash magisk on it? tried it and got me always in bootloop to twrp
destroymen said:
Do you have anti rollback arb?
Click to expand...
Click to collapse
fastboot getvar anti returns 1, so i think still nt yet implemented
Does ok Google finally work? Notification icons in the always on display like WhatsApp as in the Chinese version?
Everlite92 said:
any solution to flash magisk on it? tried it and got me always in bootloop to twrp
Click to expand...
Click to collapse
what version of magisk did you tried ?
DannGD said:
what version of magisk did you tried ?
Click to expand...
Click to collapse
The newest version. 17.1
Everlite92 said:
any solution to flash magisk on it? tried it and got me always in bootloop to twrp
Click to expand...
Click to collapse
Right after install rom you hv to install Disable_Dm-Verity_ForceEncrypt. After that install magisk.
Sent from my MI 8 using Tapatalk
Little question,
can I install this with locked bootloader and without wiping my data?
At the moment, I am on latest global stable 9.6.7.0
I tried to use the updater app, but I got error message, that I can't flash new android version (9) from 8.1. So maybe I can dirty-update older version with 8.1 and update through updater?
Everlite92 said:
any solution to flash magisk on it? tried it and got me always in bootloop to twrp
Click to expand...
Click to collapse
Flash dm-verity disabler after flashing magisk, everything works fine, and in the google settings my phone shows that its certified ?
I'm on official miui 10 version 10.3.7 and I have twrp installed and rooted with magisk. I wanna keep the root but also upgrade to 10.3.8.
How should I do this?
You can install the globe rom from this side.
https://mi-globe.com/miui-firmware-rom-builder-features/65/
Click on miui 9.6.27 and then select the 10.3.8.0 stable version.
Configure what ever you want and flash it with twrp.
ParsaMrrelax said:
I'm on official miui 10 version 10.3.7 and I have twrp installed and rooted with magisk. I wanna keep the root but also upgrade to 10.3.8.
How should I do this?
Click to expand...
Click to collapse
Install new room + magisk with TWRP. Dont wipe data, dirty flash rom.
Alvian_P said:
Install new room + magisk with TWRP. Dont wipe data, dirty flash rom.
Click to expand...
Click to collapse
Should I download the full rom or only the ota update zip? what about FED ? should i flash that as well?
ConradB said:
You can install the globe rom from this side.
https://mi-globe.com/miui-firmware-rom-builder-features/65/
Click on miui 9.6.27 and then select the 10.3.8.0 stable version.
Configure what ever you want and flash it with twrp.
Click to expand...
Click to collapse
Thanks very much. This a very nice site
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Try magisk canary build, works fine here..
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
+1
---------- Post added at 08:32 AM ---------- Previous post was at 08:29 AM ----------
Please somebody write step by step root 11.04.0
I try everything
Uninstall previous Magisk and then install again. You might need to use the Canary version. Please bear in mind that has a few cosmetic issues...
Sent from my Galaxy Tab S5e using XDA Labs
guhvanoh said:
Uninstall previous Magisk and then install again. You might need to use the Canary version. Please bear in mind that has a few cosmetic issues...
Click to expand...
Click to collapse
Again nothing , use magisk 20.3
Download magisk unistaller from magisk Web and flash it, then clean dalvich cache and cache, then reboot to system it Will take a minute.
After download magisk 20.3 from magisk web, reboot to twrp and flash it. If you cant install modules, reinstall magisk with direct install (recommended).
Its all, good luck.
Enviado desde mi POCOPHONE F1 mediante Tapatalk
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
If you want to use Xiaomi.eu build, I would suggest you to flash Miglobe rom( it is based on xiaomi.eu builds). I am currently using it with magisk 20.3 and it passes safety net also.
molina22 said:
Download magisk unistaller from magisk Web and flash it, then clean dalvich cache and cache, then reboot to system it Will take a minute.
After download magisk 20.3 from magisk web, reboot to twrp and flash it. If you cant install modules, reinstall magisk with direct install (recommended).
Its all, good luck.
Enviado desde mi POCOPHONE F1 mediante Tapatalk
Click to expand...
Click to collapse
I tried this today and it didn't work.
patch magisk zip with the boot.img I provided. Then flash the new boot.img in twrpn as boot.
https://drive.google.com/open?id=1Gn6jN1QR87ACH0Z3SjQVjlXqUD62eygd
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
hey OP, any solution? I am in the same boat too. Just yesterday updated to 11.0.4.0 Android 10 on my Poco using TWRP, boot fine. Then flash Magisk 20.3, my Poco wont boot
Solution
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
ma ismuka said:
hey OP, any solution? I am in the same boat too. Just yesterday updated to 11.0.4.0 Android 10 on my Poco using TWRP, boot fine. Then flash Magisk 20.3, my Poco wont boot
Click to expand...
Click to collapse
Hey there.
I also had the same problem as you guys. Just updated my Xiaomi Pocophone F1 from Android 9 (rooted) to Android 10, dirty flash style. Usually, when you flash the ROM, you need to flash the Magisk again. So I did that on Android 10 ROM, then I got bootloop.
Fortunately, I've found a solution. I just followed the guy post below.
molina22 said:
Download magisk unistaller from magisk Web and flash it, then clean dalvich cache and cache, then reboot to system it Will take a minute.
After download magisk 20.3 from magisk web, reboot to twrp and flash it. If you cant install modules, reinstall magisk with direct install (recommended).
Its all, good luck.
Enviado desde mi POCOPHONE F1 mediante Tapatalk
Click to expand...
Click to collapse
I use the stock ROM and Official TWRP 3.3.0-0 for the recovery mode.
The steps I've taken to solve the problem (I assume you're already on Android 10):
Flash the Magisk Uninstaller 20200110
Wipe cache/dalvik
Reboot to system (the system should reboot successfully)
Reboot to recovery
Flash Magisk v20.3
Reboot to system
Done
The recovery will be keep replacing with the stock one. So, don't forget to flash the TWRP before booting into recovery mode, until you successfully rooted the phone.
I hope this would help you guys to solve the problem.
Hello
You can install miui 11.0.4.0 with magisk preinstalled from here:
https://mi-globe.com/miui-firmware-rom-builder-features/76/
Flash it via twrp. Recommended (probably must) format system and data before flashing.
stuck on boot menu poco f1
zerodeus94 said:
Hello guys. My Pocophone F1 is good with latest xiaomi.eu build Android Pie MIUI 11.0.5.0 until I flashed Android 10 MIUI 11.0.4.0 on my phone. Latest Magisk 20.3 wont install after I flashed it. I tried flashing Magisk 19.3 but it ended bootlooping my device. Any solution from xda devs?
Stock rom wont boot either after flashing any magisk version
Click to expand...
Click to collapse
after flashing this miui 11 my phone is in boot menu...not connecting to pc and fastboot mode is not coming also twrp not coming. bootloader unlock sign is not showing too.. what should i do??
for some time I have been using the xiaomi.eu rom, and I asked myself.
is it better to install a stock rom and then put a magisk in it or install a costum rom? if it is the second choice which one are you using?
Mustax93 said:
for some time I have been using the xiaomi.eu rom, and I asked myself.
is it better to install a stock rom and then put a magisk in it or install a costum rom? if it is the second choice which one are you using?
Click to expand...
Click to collapse
Going custom miui rom (xiaomi.eu) is the best way to enjoy MIUI. You get all the MIUI china rom goodies without the bloatware and ads.
Mustax93 said:
for some time I have been using the xiaomi.eu rom, and I asked myself.
is it better to install a stock rom and then put a magisk in it or install a costum rom? if it is the second choice which one are you using?
Click to expand...
Click to collapse
I use official global rom 11.0.1 android 10.
Rooted with magisc..
Got dolby atmos and Viper4android, a theme mod from one ui and works like a charm no reason to install any custom Rom.
See attachments ?
@derrekgamer what do you do when you get an OTA update? need to root again?
PS update your thread with one UI howto, it looks good!
Thanks!
punteruk said:
@derrekgamer what do you do when you get an OTA update? need to root again?
PS update your thread with one UI howto, it looks good!
Thanks!
Click to expand...
Click to collapse
Hello. Yes i receive ota update. A week ago Miui 11. 0.3.0 has arrived..
To do that ota update and keep my system up to date without losing any data im using pitch black recovery.. That twrp supports miui ota update and can bypass the xiaomi security. Is the only twrp who can do that.. And it's very cool.when i get ota update I press only the install button and the phone is rebooting and goes in to the twrp recovery and installs the update without any problem.. Before flash twrp says :
miui encryption : yes
Decrypted successfully
Installing ota update
Update successfully
Applying encryption..
Done.
Something like that and my phone works. I can flash also full recovery miui Rom global (2.4 GB size) using the same twrp.. So I don't need even a pc to reflash the hole phone system again..
Link to the twrp :
https://forum.xda-developers.com/mi...covery-mi-8-lite-v2-9-0-base-twrp-v3-t4000857
The best.. Must read and see the article..
About the theme.. I asked on the Mi 8 lite answer and questions forum And it looks like no one wants/need A theme [ONE UI], because no answers So no reason do upload or do something.
Mustax93 said:
for some time I have been using the xiaomi.eu rom, and I asked myself.
is it better to install a stock rom and then put a magisk in it or install a costum rom? if it is the second choice which one are you using?
Click to expand...
Click to collapse
Going custom miui rom like MIUIMIX, MIUI IT, XIAOMI.EU, Mi-Globe, MiRoom, Etc is the best. You get all the MIUI ROMs goodies without ads.
Hi guys.
I'm on MIUI Global 12.5.1.0 RKIEUOR. Already unlocked the device and would like to root with Magisk, so I'm looking for boot.img to patch it with Magisk app, but the only rom version I can find to extract boot.img for 12.5.1.0 is RKIEUXM.
Would it matter if I use this one?
Why can't you just download twrp (I know it's in development but it works) and just flash magisk via it?
mejsi said:
Why can't you just download twrp (I know it's in development but it works) and just flash magisk via it?
Click to expand...
Click to collapse
Is there really a working twrp for renoir? Having trouble finding one that works for this phone.
Scroll down for it. It has a few issues but it works. I have rooted Mi 11 Lite 5g Touchscreen may not work for a few seconds but after that it works perfectly.
Rejerf said:
Is there really a working twrp for renoir? Having trouble finding one that works for this phone.
Click to expand...
Click to collapse
that's the last one who works correctly TWRP-3.5.2-renoir-Nebrassy
Rejerf said:
Hi guys.
I'm on MIUI Global 12.5.1.0 RKIEUOR. Already unlocked the device and would like to root with Magisk, so I'm looking for boot.img to patch it with Magisk app, but the only rom version I can find to extract boot.img for 12.5.1.0 is RKIEUXM.
Would it matter if I use this one?
Click to expand...
Click to collapse
My phone was is running an EMEA ROM, once the latest 12.5 update popped there was no archive version with .img files inside, so I downloaded the ROM for a different region (similar version, though), extracted the boot.img, patched it with Magisk and flashed it to the phone. Everything works fine, no issues.
ZeroCGTI said:
My phone was is running an EMEA ROM, once the latest 12.5 update popped there was no archive version with .img files inside, so I downloaded the ROM for a different region (similar version, though), extracted the boot.img, patched it with Magisk and flashed it to the phone. Everything works fine, no issues.
Click to expand...
Click to collapse
imo the easiest way is just booting twrp (not flashing) and install magisk
I need the boot patch image image please help
rayman95 said:
that's the last one who works correctly TWRP-3.5.2-renoir-Nebrassy
Click to expand...
Click to collapse
What's wrong with official 3.6.0?
Rejerf said:
Hi guys.
I'm on MIUI Global 12.5.1.0 RKIEUOR. Already unlocked the device and would like to root with Magisk, so I'm looking for boot.img to patch it with Magisk app, but the only rom version I can find to extract boot.img for 12.5.1.0 is RKIEUXM.
Would it matter if I use this one?
Click to expand...
Click to collapse
https://xiaomifirmwareupdater.com should have it.
By use of MIUI Downloader from Google Play, you can easily locate/download all kinds of stock (and Xiaomi eu) ROMs and TWRP for your Xiaomi device
testguest said:
What's wrong with official 3.6.0?
Click to expand...
Click to collapse
It was 3 months ago..3.6 was not created
rayman95 said:
It was 3 months ago..3.6 was not created
Click to expand...
Click to collapse
Download TWRP for renoir
Download TWRP Open Recovery for renoir
eu.dl.twrp.me
testguest said:
Download TWRP for renoir
Download TWRP Open Recovery for renoir
eu.dl.twrp.me
Click to expand...
Click to collapse
I know, why post you the link???
rayman95 said:
I know, why post you the link???
Click to expand...
Click to collapse
rayman95 said:
It was 3 months ago..3.6 was not created
Click to expand...
Click to collapse
22.1.5 doesn't work that way for me, by the way.
Neither with Magsik Stable/Beta, nor with Magisk Canary. Phone keeps ending in a bootloop. 21.12.29 was fine.
testguest said:
22.1.5 doesn't work that way for me, by the way.
Neither with Magsik Stable/Beta, nor with Magisk Canary. Phone keeps ending in a bootloop.
Click to expand...
Click to collapse
Sorry, I don't understand. You did root Xiaomi.eu 22.1.5 by flashing Magisk through TWRP 3.6, or by patching boot.img and flashing the patched img through Fastboot?
And by using Magisk Stable v23 or Canary 23016?
Or you tried but you got a bootloop?
In that case again, which Magisk version and by which method (TWRP or patching & flashing)?
zgfg said:
Sorry, I don't understand. You did root Xiaomi.eu 22.1.5 by flashing Magisk through TWRP 3.6, or by patching boot.img and flashing the patched img through Fastboot?
And by using Magisk Stable v23 or Canary 23016?
Or you tried but you got a bootloop?
In that case again, which Magisk version and by which method (TWRP or patching & flashing)?
Click to expand...
Click to collapse
Patched boot.img, as mentioned using Stable/Beta and Canary.
testguest said:
Patched boot.img, as mentioned using Stable/Beta and Canary.
Click to expand...
Click to collapse
Sorry I have no renoir yet - hence I could not test myself (asking while waiting for the phone)
With previous Weekly MIUI 13/A12 you were able to install Magisk (or this is now the first MIUI 13/A12 Xiaomi.eu Weekly)?
I.e, wondering if problem with rooting started with MIUI 13 and A12
PS: I see now also MIUI 13 Stable for renoir: xiaomi.eu_multi_MI11Lite5G_V13.0.4.0.SKICNXM_v13-12-fastboot.zip
Downloads for : -Android- Generic Device/Other | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
androidfilehost.com
MIUI 13 - MIUI 13 STABLE RELEASE
Status: RELEASED RULES WHEN POSTING 1. If a ROM is not published DONT ASK ABOUT ITS ETA 2. If a ROM is not published DONT ASK why! 3. If a ROM is available, download it and use it 4. If a ROM has bugs, post the bug to the bug section if the BUG is not already listed 5. If you use any form of...
xiaomi.eu
zgfg said:
[...]
Click to expand...
Click to collapse
The previous one (21.12.29) also was A12.
I think I won't go stable for now.