Changing Rom [ENCRYPTED/DECRYPTED] - Xiaomi Redmi Note 7 Pro Guides, News, & Discussion

Dont worry guys if u got confused with the flashing steps of encryption and decryption
[Flashing process from miui or any Custom rom] :-
Install Ptwrp
Format data By typing "YES"
Flash latest Chinese wkly fw
Flash ROM
Flash GAPPS (Optional)
Flash Fcrypt (Optional) [This will make u decrypted]
Reboot
Enjoy
In Custom ROMS Encryption To Encryption :
If you are encrypted and want to switch roms:
1. Remove lock screen password
2. Back up your apps and stuffs
3. Boot to recovery
4. Wipe only Data in advance wipe
5. Flash new ROM and stuffs (Make sure it is properly wrappedkey supported) else can get error or worst.
5. Reboot
6 Done. Profit :good:
Encryption to Decryption :
If u are encrypted and want to get decrypted :
1. First format data (by typing yes)
2. Flash latest Chinese wkly fw
3. Flash rom then gapps then fcrypt zip and
4. Done.. (Magisk is optional after 1st boot).
5. Profit :good:
[ Decryption to Decryption ]
If decrypted and want to stay decrypted
1. Go adv. wipe :- wipe [data, system, vendor , dalvik, caches]
2. Flash ROM
3. Flash GAPPS (Optional)
4. Flash Fcrypt
5. Reboot
6. Enjoy
Note : Make sure you you flash latest Chinese wkly fw.?
Well if you found it useful then Hit the thanks button (it's FREE of Cost)
WELL, IF U LIKE MY WORK Then HIT the Thanks Button . KThanks.

Thanks a lot buddy really needed this. U helped me a lot . Kudos 2 ur hardwork #lifesaver

Hey..what are the steps to move from custom rom (decrypted) to MIUI (decrypted) ?

Thanks ?

sujju said:
Hey..what are the steps to move from custom rom (decrypted) to MIUI (decrypted) ?
Click to expand...
Click to collapse
Who wants to go to miui hahahaha..
anyways
1. Format data
2. Flash Miui recovery zip
3. Flash “no-verity-force-encrypt.zip” file.
4. Reboot
5. ENJOY :good:

RupeshRN said:
Thanks
Click to expand...
Click to collapse
:angel::angel:

sourav24071999 said:
Who wants to go to miui hahahaha..
anyways
1. Format data
2. Flash Miui recovery zip
3. Flash “no-verity-force-encrypt.zip” file.
4. Reboot
5. ENJOY :good:
Click to expand...
Click to collapse
Thanks..
Just to be sure, formatting data would erase internal storage. You mean then I would sideload the zips through TWRP?

sujju said:
Thanks..
Just to be sure, formatting data would erase internal storage. You mean then I would sideload the zips through TWRP?
Click to expand...
Click to collapse
Yes formattinfg data will erase ur storage . NO sideload

sourav24071999 said:
Dont worry guys if u got confused with the flashing steps of encryption and decryption
[Flashing process from miui or any Custom rom] :-
Install Ptwrp
Format data By typing "YES"
Flash latest Chinese wkly fw
Flash ROM
Flash GAPPS (Optional)
Flash Fcrypt (Optional) [This will make u decrypted]
Reboot
Enjoy
In Custom ROMS Encryption To Encryption :
If you are encrypted and want to switch roms:
1. Remove lock screen password
2. Back up your apps and stuffs
3. Boot to recovery
4. Wipe only Data in advance wipe
5. Flash new ROM and stuffs (Make sure it is properly wrappedkey supported) else can get error or worst.
5. Reboot
6 Done. Profit :good:
Encryption to Decryption :
If u are encrypted and want to get decrypted :
1. First format data (by typing yes)
2. Flash latest Chinese wkly fw
3. Flash rom then gapps then fcrypt zip and
4. Done.. (Magisk is optional after 1st boot).
5. Profit :good:
[ Decryption to Decryption ]
If decrypted and want to stay decrypted
1. Go adv. wipe :- wipe [data, system, vendor , dalvik, caches]
2. Flash ROM
3. Flash GAPPS (Optional)
4. Flash Fcrypt
5. Reboot
6. Enjoy
Note : Make sure you you flash latest Chinese wkly fw.?
Click to expand...
Click to collapse
Damn the community really needed this. Good job man.
Could you also add steps to move from MIUI to Custom? (Both encrypted) and vice versa.

im on the previous weekly build of xiaomi.eu rom and i haven't flashed fcrypt disabler, Now how should i update my rom to the latest weekly build? can i use the built-in updater app or should i follow some other procedure? also is it fine to stay encrypted?

Naveenthemi said:
Damn the community really needed this. Good job man.
Could you also add steps to move from MIUI to Custom? (Both encrypted) and vice versa.
Click to expand...
Click to collapse
?? Welcome

Sachin ET said:
im on the previous weekly build of xiaomi.eu rom and i haven't flashed fcrypt disabler, Now how should i update my rom to the latest weekly build? can i use the built-in updater app or should i follow some other procedure? also is it fine to stay encrypted?
Click to expand...
Click to collapse
Use in build ota updater

Hi, can somebody link the fcrypt zip?

Hello,
I was on MIUI , then flashed PE 10,
switched back to MIUI.
Sensors aren't working now !
I tried with MIUI Fastboot rom as well as ZIP file.
still no luck
suggestions please !

How to go back to miui 11 from pe 10 rom
I was in miui 11 encrypted , then i came to pe 10 encrypted , now how can i go back to miui 11 without losing sensor?

rasik107 said:
Hello,
I was on MIUI , then flashed PE 10,
switched back to MIUI.
Sensors aren't working now !
I tried with MIUI Fastboot rom as well as ZIP file.
still no luck
suggestions please !
Click to expand...
Click to collapse
Ofc it wont be wrking.. y dont u guys read changelogs or imp notes if u flash pe then roll back to miui rip to sensors and L1 . For fix check violet official grp. or pe for violet grp.

John878 said:
I was in miui 11 encrypted , then i came to pe 10 encrypted , now how can i go back to miui 11 without losing sensor?
Click to expand...
Click to collapse
Stick to Andriod 10 roms.

sourav24071999 said:
Stick to Andriod 10 roms.
Click to expand...
Click to collapse
That means once you came to PE, than no way to go back to MIUI?

drjmvgami said:
That means once you came to PE, than no way to go back to MIUI?
Click to expand...
Click to collapse
No.. untill memeui fix this

Is it gona encrypt havoc os because it already decrypted?

Related

MIUI GLOBAL 8.0.6.0 to CM14

First of all, im not very new on android things, but the various type and hardware on kenzo a little bit confuse me.
Okay, i have a 2GB version of kenzo, running MIUI Global stable 8.0.6.0, i want to know if the procedure that i would like to do is right.
1. Unlocking my bootloader (still waiting for the approval)
2. Installing twrp.
Nah for the no 2, do i have to do any additional things or i just reboot it right away after installing twrp? (Im not interested on rooting because i dont need it atm).
3. Flashing the mandatory fw, cm14, and the gapps.
Can i actually flash them all on my current miui version? Or do i have to be on developer or something of a kind?
Thanks for your replies.
It means a lot to me, really.
senaferdy79 said:
First of all, im not very new on android things, but the various type and hardware on kenzo a little bit confuse me.
Okay, i have a 2GB version of kenzo, running MIUI Global stable 8.0.6.0, i want to know if the procedure that i would like to do is right.
1. Unlocking my bootloader (still waiting for the approval)
2. Installing twrp.
Nah for the no 2, do i have to do any additional things or i just reboot it right away after installing twrp? (Im not interested on rooting because i dont need it atm).
3. Flashing the mandatory fw, cm14, and the gapps.
Can i actually flash them all on my current miui version? Or do i have to be on developer or something of a kind?
Thanks for your replies.
It means a lot to me, really.
Click to expand...
Click to collapse
If you don't want to root, then don't flash SuperSU.
And for installing the ROM, first flash the developer ROM.
Download the developer ROM. Go the Updates > Choose Update Package > Choose the Developer ROM and install it.
Then,
Install twrp.
Transfer the CM14 Firmware, ROM, GApps to your Internal Storage.
Reboot to recovery.
Backup your current ROM. (Select everything)
Go to wipe > advanced wipe > choose everything except internal storage and microSD card.
Go to install > flash firmware > then ROM > then GApps.
Reboot
PiyushA01 said:
If you don't want to root, then don't flash SuperSU.
And for installing the ROM, first flash the developer ROM.
Download the developer ROM. Go the Updates > Choose Update Package > Choose the Developer ROM and install it.
Then,
Install twrp.
Transfer the CM14 Firmware, ROM, GApps to your Internal Storage.
Reboot to recovery.
Backup your current ROM. (Select everything)
Go to wipe > advanced wipe > choose everything except internal storage and microSD card.
Go to install > flash firmware > then ROM > then GApps.
Reboot
Click to expand...
Click to collapse
Could you please link the twrp installation thread?
Thanks!
Sure
Ky$h said:
Could you please link the twrp installation thread?
Thanks!
Click to expand...
Click to collapse
Sure buddy. Here you go.
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
Press thanks if I helped
PiyushA01 said:
If you don't want to root, then don't flash SuperSU.
And for installing the ROM, first flash the developer ROM.
Download the developer ROM. Go the Updates > Choose Update Package > Choose the Developer ROM and install it.
Then,
Install twrp.
Transfer the CM14 Firmware, ROM, GApps to your Internal Storage.
Reboot to recovery.
Backup your current ROM. (Select everything)
Go to wipe > advanced wipe > choose everything except internal storage and microSD card.
Go to install > flash firmware > then ROM > then GApps.
Reboot
Click to expand...
Click to collapse
So there is a must to be on developer rom in order to install cm14?
senaferdy79 said:
So there is a must to be on developer rom in order to install cm14?
Click to expand...
Click to collapse
It is preferred to install Developer ROM and install Pico GApps if you want the VoLTE access. If you don't want, then no need.
Hit the thanks button if it helped. ?
---------- Post added at 11:52 AM ---------- Previous post was at 11:49 AM ----------
Ky$h said:
Could you please link the twrp installation thread?
Thanks!
Click to expand...
Click to collapse
Watch this video: https://youtu.be/0ZOyjEhgZ-8
Install the customised twrp for Redmi Note 3 since it helps to install OTA updates when using MIUI ROMs.
Hit thanks if it helped.
wtf begging for likes?
what does pico gapps have to do with VoLTE?!
its not even needes to be on dev rom, its just recommended to use 6.11.24+ firmware for CM14 thats why... I usually just flash eu rom,epicrom,multirom,miuipro whichever of these, because they never relock BL.
After unlocking the bootloader, install Alka recovery and back up all the partitions before doing anything. Copy the back up to a safe place , you will need it for whenever you mess up.
harishmenace said:
After unlocking the bootloader, install Alka recovery and back up all the partitions before doing anything. Copy the back up to a safe place , you will need it for whenever you mess up.
Click to expand...
Click to collapse
Whats distinguishes alka with the official twrp?
Oscilator said:
wtf begging for likes?
what does pico gapps have to do with VoLTE?!
its not even needes to be on dev rom, its just recommended to use 6.11.24+ firmware for CM14 thats why... I usually just flash eu rom,epicrom,multirom,miuipro whichever of these, because they never relock BL.
Click to expand...
Click to collapse
Im kinda new with this topic, but what rom thats usually cause the relocking issue?
senaferdy79 said:
Whats distinguishes alka with the official twrp?
Click to expand...
Click to collapse
With official recovery you have to flash modified boot.img while flashing MIUI rom, with alka you don't have to. Also alka backs up all the partitions, so you don't have to worry about lost imei or bootloader relocking or any other problem. Just restore the backup and you will be right back from where you started.
Also go through these threads while waiting for your unlock permisssion
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
http://en.miui.com/thread-235865-1-1.html
also, zcx twrp can also backup all partitions + disables dm verity, just like alka does.
only switching from LP to MM or vice versa locks bootloader and flashing fastboot rom via edl does that too. some roms also lock it...
Same here. I too bought a 16gb version. But confused why I need to flash any developer ROM.
Can't I simply flash twrp after unlocking the bootloader officially and then flash any ROM from twrp(while on the MIUI GLOBAL 8.0.6.0 version)??
Any help would be appreciated
Sent from my Redmi Note 3 using XDA-Developers mobile app
Sorry for the intreruption but i also have a question. I was on MIUI 8.0.6.0, after that I wiped and flashed appropriate firmware for CM then CM13 then Gapps. What whould one do if he theoretically want to rollback to miui, is it ok to flash latest miui stable rom on top of cm firmware? I miss too much the camera app which had great slo mo and timelapse features. Im also thinking of updating to CM14, dont know yet...seems buggy. Thanks
richiegrasshopper said:
Sorry for the intreruption but i also have a question. I was on MIUI 8.0.6.0, after that I wiped and flashed appropriate firmware for CM then CM13 then Gapps. What whould one do if he theoretically want to rollback to miui, is it ok to flash latest miui stable rom on top of cm firmware? I miss too much the camera app which had great slo mo and timelapse features. Im also thinking of updating to CM14, dont know yet...seems buggy. Thanks
Click to expand...
Click to collapse
You can always flash the rom image with the flash tool(that works 100 percent). If you want to flash it from recovery than i think you need to flash lazy flasher after flashing the ROM. Give it a try.

How to install GSI ROMs

Guys, as all are aware of GSI images available but cannot flash, then follow the steps....
A. Clean Install :-
1. install modified redwolf(link= https://drive.google.com/uc?authuser=5&id=1H7znKopLAL2u0JJEIPb8ANayAhtTB-xz&export=download) or modified TWRP(link= https://sourceforge.net/projects/te...Treble/TWRP-3.2.1-0-land(Treble).img/download)...
2. go to settings in recovery and enable treble mode...
3. install any treble ROM of your want...
4. go to wipe-> swipe to factory reset...
5. go to install-> select images->select the file-> flash type - system image...
6. wait for flashing system...
7. reboot...
8. set up device...
9. go to recovery and flash magisk and other stuffs you want(Magisk treble link= https://androidfilehost.com/?fid=962187416754478287)
B. Dirty Install:-
1. go to recovery->wipe->advanced wipe-> system, cache , dalvik
2. follow steps from A.5 to A.9..
Non-TWRP flash:-
1. go to fastboot mode...
2. in adb, type fastboot devices and check if it's showing...
3. type fastboot flash system <.img> type the link of the file in your computer...
4. type fastboot reboot...
Tell if it worked...I've did this flashed crdroid treble then flashed pixel experience GSI...
Hit thanks if it worked....
Reserved
Is VoLTE working with GSI image?
Falcon_fan said:
Is VoLTE working with GSI image?
Click to expand...
Click to collapse
Pixel experience didn't work for me... Not even adding ims working... Alas...
What does Dirty Install mean? Does it mean i wont lose any app installed in my phone?
Do we need to go setting in recovery and enable Treble mode just like clean install?
I am currently running official stock rom
---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------
What does Dirty Install mean? Does it mean i wont lose any app installed in my phone?
Do we need to go setting in recovery and enable Treble mode just like clean install?
I am currently running official stock rom. Btw my phone is unlocked bootloader
Trovies said:
What does Dirty Install mean? Does it mean i wont lose any app installed in my phone?
Do we need to go setting in recovery and enable Treble mode just like clean install?
I am currently running official stock rom
---------- Post added at 04:48 PM ---------- Previous post was at 04:47 PM ----------
What does Dirty Install mean? Does it mean i wont lose any app installed in my phone?
Do we need to go setting in recovery and enable Treble mode just like clean install?
I am currently running official stock rom. Btw my phone is unlocked bootloader
Click to expand...
Click to collapse
Dirty install means you can install ROM without losing data... It is only available if you want to upgrade your ROM not changing the ROM...
Yes enabling treble mode is mandatory...
First time you need clean install...
So first install the twrp, then format data... It'll erase your internal storage... Mandatory if you are coming from miui otherwise you'll face encryption problem...
Format data then install any treble ROM no matters but keep in mind that it must be either GSI or any treble or non treble ROM for our device...
SKA97 said:
Dirty install means you can install ROM without losing data... It is only available if you want to upgrade your ROM not changing the ROM...
Yes enabling treble mode is mandatory...
First time you need clean install...
So first install the twrp, then format data... It'll erase your internal storage... Mandatory if you are coming from miui otherwise you'll face encryption problem...
Format data then install any treble ROM no matters but keep in mind that it must be either GSI or any treble or non treble ROM for our device...
Click to expand...
Click to collapse
After install TWRP,do i need to disable dm verity? And format data means wipe system, vendor, data, cache, dalvik? Also after flash new rom, some guides tell to flash lazy flasher, is it still necessary?
What's the different between GSI and Treble rom? I know pixel experience is treble rom. But GSI? Any example?
Trovies said:
After install TWRP,do i need to disable dm verity? And format data means wipe system, vendor, data, cache, dalvik? Also after flash new rom, some guides tell to flash lazy flasher, is it still necessary?
What's the different between GSI and Treble rom? I know pixel experience is treble rom. But GSI? Any example?
Click to expand...
Click to collapse
dm verity is for flashing miui recovery ROMs, not required for custom ROMs...
format data means like formatting a pendrive... it'll wipe everything in it... excluding some root system core files and recovery stuffs...
lazy flasher is dm verity flasher... as said its always for miui ROMs... some says to flash after installing xposed which is wrong...
you can keep it... just in case you see bootlloop which is a dream...:laugh:
Treble=ROM containing vendor files for a device(for flashing GSI)
GSI= generic system image which is a universal file which doesnt contain vendor files, so you need to flash a treble ROM before flashing a GSI so that it boots up...
there's pixel experience gsi image available which you can only flash if there's any treble ROM pre installed...
Hi, I tried asop gsi over pixel experience treble rom, just for fun ?
Phone boot, but no GSM network, no Sim card found... All the rest looks to be OK...
What I've done wrong?
Any idea?
lcarolo said:
Hi, I tried asop gsi over pixel experience treble rom, just for fun
Phone boot, but no GSM network, no Sim card found... All the rest looks to be OK...
What I've done wrong?
Any idea?
Click to expand...
Click to collapse
Have you factory data reset before installing ROM??? Then it should work... Just in case of you still face issue then use lineage as base...
SKA97 said:
Have you factory data reset before installing ROM??? Then it should work... Just in case of you still face issue then use lineage as base...
Click to expand...
Click to collapse
Tried resurrection remix and network works, but home don't... Need clean data maybe, no time to try... Maybe later, I think when full whipe it should work.
By the way, as we have good compiled up to date rom, it is not really useful for now...
Thanks for the guide. I have some doubts.
1.My device is currently running on los15.1(Rooted with magisk), can i do dirty flash?
2.Will Google release gsi for official oreo-treble devices?
3.Assume my device is running on RR-gsi now i want to flash another gsi, do i have to perform a clean flash or dirty flash?

Vendors

Hello, I am newbie yet so I am asking if anyone can explain the vendor's use, and what do I get from installing them.
Thank you for your time
Now almost roms here includes custom vendor. So you need firmware only.
https://xiaomifirmwareupdater.com/vendor/beryllium/
And here's custom rom installation process
Flash rom
Flash firmware
Gapps(optional)
Dfe(if you don't want it to be encrypted)
Magisk(optional)
That's it. No need to know more.
nasos_Gr said:
Hello, I am newbie yet so I am asking if anyone can explain the vendor's use, and what do I get from installing them.
Thank you for your time
Click to expand...
Click to collapse
Miui decided to use MODIFIED VENDOR IMAGE hence POCO F1 gets a modified vendor image for Android Pie-based Project Treble GSIs
what was the impact?
custom roms couldn't be flashed (booted) if you don't flash the modified vendor image from twrp
even today when most of the roms have their own vendor you still need to flash the vendor+firmware (atleast)
Developer Akhil Narang started collecting all releases at
https://mirror.akhilnarang.me/MIUI/beryllium/
currently I am using 9.6.27-9.0 which is working best for me, 10.3.6 image made my batter drainage high (atleast i noticed)
I am on HAVOC2.8 and this is how i did it
1. flashed TWRP 3.3.1 unofficial (download it from HERE ) ref Reference - as official twrp has TOUCH driver issues. this one worked with me very well
2. I wiped /data, /system then
3. flashed VENDOR.zip from HERE
4. FLASHED CUSTOM ROM (i use HAVOC2.8)
5. FLASHED DFE HERE - REFERENCE
6. FLASHED GOOGLE APPS ( GAPPS.ORG) ( ARM64>9.0MicroPackage)
7. Flash Kernel ( OPTIONAL- havoc uses shadow kernel , i feel optimus drunk kernel is better, battery and 4g connectivity) even Franco Kernel is very good
8. FLASHING MAGISK19.3
9. when i was on havoc2.7, by using MIGRATE, it made flashable zip of my APPS+DATA, stored in internalStorage, and now I will FLASH that file., Mine size goes to 2gb you can get it from HERE
10. WIPE CACHE/DELVIK
11. REBOOT
fire reboot may go in to bootloop and then second reboot may take a while and finally you should see Pixel Setup asking google accounts and info etc
-----------------------
extraa
once after you finish setup! don't RESTORE APPS from PLAYSTORE, (download only license apk, in my case I have purchases many apps from playstore and saperate license info is always appear in intial setup! SELECT THOSE ONLY)
ONCE playstore is DONE downloading all your selected (fewer) apps, and MAGISK ROOT is working...... put device on AIRPLANE MODE
FROM DROP DOWN Notification panel, CLICK MIGRATE, and it will prompt you what do you wana restore from your previouce ROM to newly flashed HAVOC ..APPS+SETTINGS+PERMISSION+DATA etc - migrate restoration may take upto 30 mins,
once done, uninstall from system and reboot device!
REMEMBER I DONOT RECOMEND MIGRATE TRICK FOR WHATSAPP, it doesn't work properly and NOTIFICATION ISSUES with BLANK DP observed by me whenever I forcely re-instated whatsapp by migrate!
Martensite said:
Now almost roms here includes custom vendor. So you need firmware only.
https://xiaomifirmwareupdater.com/vendor/beryllium/
And here's custom rom installation process
Flash rom
Flash firmware
Gapps(optional)
Dfe(if you don't want it to be encrypted)
Magisk(optional)
That's it. No need to know more.
Click to expand...
Click to collapse
I understand but I have installed some custom Roms without finding vendor image and still it works perfect.
And do I need to install this image every time I flash a new ROM?
Thanks
nasos_Gr said:
I understand but I have installed some custom Roms without finding vendor image and still it works perfect.
And do I need to install this image every time I flash a new ROM?
Thanks
Click to expand...
Click to collapse
Flashing custom roms will not wipe anything, so the vendor is still there. And firmwares too.

Update the stock rom , help needed

Hello ,
I need to receive the 10.3.8 Miui stable update ( yes still on 10.3.6 ) ,
I have TWRP and rooted using Magisk …
So Can I just download the full Rom ( 1.8 GB ) , then install it using TWRP recovery ?
I mean is it as simple as that ? or I have to flash or do anything else like lazyflasher in order nor to bootloop or brick my phone ?
You can download the entire ROM which is based on MIUI 11. Reboot to recovery, clean everything for smooth operation. Flash the new MIUI ROM and do not reboot to the system or you might lose TWRP recovery. Go back and flash TWRP recovery image again and then reboot to recovery once. Then reboot to system.
MIUI 10
Global
or
EU
MIUI 11 update
Global
or
EU Beta
Dirty flash if you stay on MIUI 10 (Format Dalvick/cache/System)
Clean Flash if you go on MIUI 11 (Format Dalvick/Cache/System/Data) (I prefer format internal storage to start with new OS)
I didnt loose TWRP with full wipe
VeerAmrit said:
You can download the entire ROM which is based on MIUI 11. Reboot to recovery, clean everything for smooth operation. Flash the new MIUI ROM and do not reboot to the system or you might lose TWRP recovery. Go back and flash TWRP recovery image again and then reboot to recovery once. Then reboot to system.
Click to expand...
Click to collapse
Thank you VeerAmrit for your reply .... I don't mind losing TWRP as I can Flash it again .
All what I am afraid of is that I read in another thread ( and other blog that I need to flash something called Lazy Flasher If I want to go with this method , otherwise I would go into boot loop ...
This part was written
(Now again go back, select Install and select the LazyFlasher .zip file. And the Swipe to confirm flash.
This step is very important, if you don’t do this, your device will be stuck in bootloop. The LazyFlasher .zip file skips the Android security check and allows the phone to boot, if you don’t do this, your phone won’t boot as it won’t be able to pass the security check.)
So I decided to ask before doing anything because this Lazy Flasher is not working anymore as per what I know .
Mastakony said:
MIUI 10
Global
or
EU
MIUI 11 update
Global
or
EU Beta
Dirty flash if you stay on MIUI 10 (Format Dalvick/cache/System)
Clean Flash if you go on MIUI 11 (Format Dalvick/Cache/System/Data) (I prefer format internal storage to start with new OS)
I didnt loose TWRP with full wipe
Click to expand...
Click to collapse
Thank you So much Mastakony for your help and links , I really appreciate .
As per Miui 11 I prefer to wait for the stable final version , as this version is called Stable Beta .
So I decided to go to 10.3.8 first , then to 11 when it is available final version .
( BTW can I go to 11 directly without 10.3.8 at all ? )
Also Mastakony please read my above reply to VeerAmrit and help my with this issue please .
Thank you in advance
AhmedPower said:
Thank you VeerAmrit for your reply .... I don't mind losing TWRP as I can Flash it again .
All what I am afraid of is that I read in another thread ( and other blog HERE ) that I need to flash something called Lazy Flasher If I want to go with this method , otherwise I would go into boot loop ...
This part was written
(Now again go back, select Install and select the LazyFlasher .zip file. And the Swipe to confirm flash.
This step is very important, if you don’t do this, your device will be stuck in bootloop. The LazyFlasher .zip file skips the Android security check and allows the phone to boot, if you don’t do this, your phone won’t boot as it won’t be able to pass the security check.)
So I decided to ask before doing anything because this Lazy Flasher is not working anymore as per what I know .
Thank you So much Mastakony for your help and links , I really appreciate .
As per Miui 11 I prefer to wait for the stable final version , as this version is called Stable Beta .
So I decided to go to 10.3.8 first , then to 11 when it is available final version .
( BTW can I go to 11 directly without 10.3.8 at all ? )
Also Mastakony please read my above reply to VeerAmrit and help my with this issue please .
Thank you in advance
Click to expand...
Click to collapse
For your satisfaction, you can flash 10.3.8 first and then flash miui 11. You can directly flash it as well which I did. No need to flash any lazy flasher or anything just directly flash the ROM from TWRP. That post is from 2017 and not for Poco.
VeerAmrit said:
For your satisfaction, you can flash 10.3.8 first and then flash miui 11. You can directly flash it as well which I did. No need to flash any lazy flasher or anything just directly flash the ROM from TWRP. That post is from 2017 and not for Poco.
Click to expand...
Click to collapse
Thanks so much for your help

Decrypt Phoenix/phoenixin

Here is the Guide to decrypt Poco X2/phoenix/phoenixin
1. Download all files from afh i.e. twrp recovery, decryptv3.zip and vbmeta.img
2. flash twrp using either fastboot or from existing recovery itself
3. reboot to recovery
4. flash vbmeta.img using flash image in vbmeta slot
5. Mount vendor, system
6. flash decryptv3.zip
7. reboot to recovery
8. format data
9. enjoy decrypt
NOTE:
Users need to flash decryptv3.zip and vbmeta.img immediately after flashing rom zipevery time when changing rom or updating same rom else it will be encrypted again and for decryption users need to format data again which is mess (dont cry afterwards)
How to avoid flashing zip and image everytime:
Ask rom builders to edit fstab and build to remove encryption by default.
Download links:
https://www.androidfilehost.com/?w=files&flid=318815
MOD EDIT: Telegram link removed, please read the STICKY!
Hey @joshi1 welcome back, great guide.
Thanks for the guide, but this is more complicated than flashing the disable encryption zip made by @zachptg5 while still end up with the same result.
It's working fine with Android 10
And didn't work with Android 11
I hope you updated to fix on Android 11
Thanks man
Yeslam7 said:
It's working fine with Android 10
And didn't work with Android 11
I hope you updated to fix on Android 11
Thanks man
Click to expand...
Click to collapse
Try this Link

Categories

Resources