[ROM][Unofficial][AOSP9r46/Pie & AOSP10r41][X/X Dualsim/X Compact]2020-11-01 builds
Downloads : see the AOSP9 release post (no gapps) and AOSP10 release post (gapps & non-gapps builds)
Required
OEM: SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_loire.zip
Install
Backup whatever you can't afford to loose ! Also search for "TA partition backup" if you never heard of it...
Have unlocked device
Have fastboot command installed
Download and extract the ZIP file related to your device
Download and extract the OEM ZIP file
Phone powered-off, keep Volume-Up key pressed while plugging it to computer with USB cable
Run the following fastboot commands, adjusting path to .img files as needed
fastboot flash boot boot.img
fastboot flash system system.img
fastboot flash cache cache.img
fastboot flash userdata userdata.img
fastboot flash recovery recovery.img (optional, skip if you want to keep twrp)
fastboot flash oem SW_binaries_for_Xperia_Android_9.0_2.3.2_v9_loire.img
Unplug the USB cable, wait for ~30 seconds then power on the device
Build characteristics
AOSP9 : PQ3A.190801.002, 2019-08-01 security patch
AOSP10 : QQ3A.200805.001, 2020-08-05 security patch
Kernel 4.9.230
Credits: the fine folks contributing to Sony Open Devices Project
These roms are provided in case they're useful, no promises, no guarantees...
Only f5121 and f5321 builds were basic-tested (call, sms, data, wifi, camera, bt, fingerprint),
no battery drain, over-heating nor intempestive reboot seen after a few hours mostly idle.
GApps, GStore, GCam and Magisk reported to work when proceeding with care (see this post)
finally something new for suzu thanks i'll test it later
vknecht said:
no battery drain, over-heating nor intempestive reboot seen after a few hours mostly idle.
Click to expand...
Click to collapse
Are you sure no reboot?
lookmanns14 said:
Are you sure no reboot?
Click to expand...
Click to collapse
i testing it right now and post a little "review" soon
for now i can only say it boot with gapps and magisk flashed
edit: when it booting on there were only a few minor errors in adb logcat so i think it will be a quiet stable rom
Adi_OP said:
i testing it right now and post a little "review" soon
for now i can only say it boot with gapps and magisk flashed
edit: when it booting on there were only a few minor errors in adb logcat so i think it will be a quiet stable rom
Click to expand...
Click to collapse
Thanks appreciate it...if there no random reboot issues,it would be nice
Flashed it on my f5121 and it's best rom for suzu right now.
No bugs at all, baterry life and prformance is great.
No random reboots (at least no reboot happened to me).
GApps/GStore working. Magisk too. Im not able to test NFC, 5GHz wifi and cast so idk if it works.
Unfortunately I'm back to nougat PA rom because
drivedroid app not working on this rom (it not working on any rom even on stock only on PA lol)
but if you not using it, this rom probably will be your daily rom.
I'm will flash this ROM soon and i'm gonna write a post about it after a "week experience". I'm still gonna write any "strange behaviours" during usage, if necessary. I hope for the best
installation help
HELP
Hello to all ..
I have already installed other roms ...
I do not have the skills to install this rom
I tried with the adb commands .. but it doesn't install ... you can explain how to install this rom .. thanks
Adi_OP said:
Flashed it on my f5121 and it's best rom for suzu right now.
No bugs at all, baterry life and prformance is great.
No random reboots (at least no reboot happened to me).
GApps/GStore working. Magisk too. Im not able to test NFC, 5GHz wifi and cast so idk if it works.
Unfortunately I'm back to nougat PA rom because
drivedroid app not working on this rom (it not working on any rom even on stock only on PA lol)
but if you not using it, this rom probably will be your daily rom.
Click to expand...
Click to collapse
Did you check it Gcam works?
twain55 said:
Did you check it Gcam works?
Click to expand...
Click to collapse
Gcam works
Davidemondo said:
I tried with the adb commands .. but it doesn't install ... you can explain how to install this rom .. thanks
Click to expand...
Click to collapse
I've added details about install instructions ; note the crucial part of those is with fastboot, not adb.
installation ok
vknecht said:
I've added details about install instructions ; note the crucial part of those is with fastboot, not adb.
Click to expand...
Click to collapse
thanks
just installed .... 100% cpu .. in alternation
I can tell you guys that 5GHz wifi works
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Xperia X (AOSP) using Tapatalk
Lihxor said:
I can tell you guys that 5GHz wifi works
Click to expand...
Click to collapse
What about for random reboot problem bro. Do you have it?
yns_rdm said:
What about for random reboot problem bro. Do you have it?
Click to expand...
Click to collapse
I'm gonna be able to answer correctly to this question after some days of usage. BTW, since i flashed i only got an unexpected reboot after flashing Magisk (so it's not that unexpected) and i had to reboot once because i've got some problems with wifi but this is a bug that i found on other pie ROMs too. I'll let you know in the following days if this issue is too annoying
Sent from my Xperia X (AOSP) using Tapatalk
This aosp build is pretty fast...but one and only,I just got reboot issues while try to use recent app switcher (gesture)
Lihxor said:
I'm gonna be able to answer correctly to this question after some days of usage. BTW, since i flashed i only got an unexpected reboot after flashing Magisk (so it's not that unexpected) and i had to reboot once because i've got some problems with wifi but this is a bug that i found on other pie ROMs too. I'll let you know in the following days if this issue is too annoying
Click to expand...
Click to collapse
Thanks Lihxor for your reply. I will wait for your usage experience for following days.
lookmanns14 said:
This aosp build is pretty fast...but one and only,I just got reboot issues while try to use recent app switcher (gesture)
Click to expand...
Click to collapse
Maybe with a clean flash all our little issues would vanish. Anyway, compared to a 2.9 Havoc GSI that i was using before flashing this AOSP i can say that (for now) this ROM looks smoother and more stable. I'm also trying to increase battery life by tweaking stuff with kernel adiutor
Sent from my Xperia X (AOSP) using Tapatalk
Lihxor said:
Maybe with a clean flash all our little issues would vanish. Anyway, compared to a 2.9 Havoc GSI that i was using before flashing this AOSP i can say that (for now) this ROM looks smoother and more stable. I'm also trying to increase battery life by tweaking stuff with kernel adiutor
Click to expand...
Click to collapse
Yeah I do clean flash..but its okay,I don't blame anyone because aosp have this issues since oreo,what wrong with aosp on sony phone btw :laugh: ...what should we do
lookmanns14 said:
This aosp build is pretty fast...but one and only,I just got reboot issues while try to use recent app switcher (gesture)
Click to expand...
Click to collapse
lookmanns14 said:
Yeah I do clean flash..but its okay,I don't blame anyone because aosp have this issues since oreo,what wrong with aosp on sony phone btw :laugh: ...what should we do
Click to expand...
Click to collapse
Could you get logcat/dmesg/ramoops logs from the crash ? And describe how to reproduce if possible ?
Related
Hello everybody,
I've just compiled PACMAN-ROM for my new Z3C. Current version is PAC-LP MR1 Beta2.
Device trees are CyanogenMod's so probably all device specific CM-bugs will be there too.
The boot.img inside the zip contains CM 12.1 kernel and "Cyanogen Recovery" (no backup right now!).
For alternative recoveries/kernels scroll down to "TESTED - WORKING"...
If the rom is stable for daily use (as I hope) I'm gonna build newer version periodically (depending on PAC & CM updates).
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
EDITS:
2015-07-09:
i've been trying to get rid of the latest problems, i.e. crashing android browser, opera browser, voice recorder and google apps (if installed). tried 4 or 5 builds in the meantime. i've got no idea why and not the skills to search in log files.
if anyone likes to test and find out, i uploaded version from july 4th.
2015-06-25:
New Version - updated CM & PAC sources. Some new PAC features there!
Version is PAC-LP MR1 Beta2 now. Unstable with crashes.
2015-05-24:
New Version - updated CM & PAC sources
2015-05-12/13:
New Version - updated CM & PAC sources
Volume bug on in-call got solved today!
2015-05-01:
I've uploaded an EXTRA boot.img including XZDualRecovery provided by NUT's!
http://nut.xperia-files.com/?ql=34070511dc3ee6809f305c66a5fa122fcbf9dcff
Flash it before or after installing the PACROM zip. It contains the zip's
kernel + DualRecovery. Installing the rom zip will overwrite recovery again
so for backups it might be necessary
to flash it always before installing a new zip, e.g.
2015-04-29:
- Screenshots
- Yes! I got it running. After some hours of use, it seems really smooth & snappy. No reboots.
- How I installed everything: Root on Kitkat stock rom, backup TA-partition, install
Dual-recovery, update to Lollipop rooted, make nandroid backup of hole system,
unlock bootloader, flash PACMAN boot.img, wipe data/caches,
flash PACMAN zip + GAPPS ... quite some hours of work.
TESTED - WORKING:
- 2G, 3G, 4G
- wifi, wifi hotspot
- bluetooth audio
- nfc
- usb otg
- GAPPS (mentioned below)
- titanium backup
- PAC customizations (not all tested)
- video playback on youtube, vlc, mxplayer
- camera & video recording
- GPS using Google Maps
- headphone sound
- XZDR recovery (version 2.8.15 not working): http://nut.xperia-files.com/
- FOTA TWRP recovery (persistent in fota kernel partition): http://forum.xda-developers.com/z3-...12-nightly-t3010550/post58854063#post58854063
- M5 kernel (CM12.1 based): http://forum.xda-developers.com/z3-compact/orig-development/kernel-m5-kernel-t3115498
BUGS:
- phone call volume loud / not reducable in dialer app. (skype & whatsapp calls are alright) solved on 150512
- If alarm clock is set active -> reboot leads to normal shutdown -> deactivate alarm for that case
- photo: Little fish-eye effect on short distance (it's not that little actually)
NOT TESTED YET:
- encryption
Installation notes: Unlocked bootloader required
- flash boot.img (rashr on phone/ fastboot on pc), then boot into custom recovery
- wipe cache, wipe art/dalvik cache
- when coming from a different rom wipe data (factory reset)
- when changing between different gapps packages format system may be useful
- flash rom zip
- if needed flash gapps zip
Download PACMAN: https://www.androidfilehost.com/?w=files&flid=30581
Download GAPPS: http://forum.xda-developers.com/android/software/app-minimal-gapps-gapps-lp-20150107-1-t2997368
Device trees used: https://github.com/filou76/manifest/blob/master/z3c.xml
Credits!!!:
PACMAN project for their great and cool work!! www.pac-rom.com/#Home
All CM developers for giving a solid custom rom ground!!
All Z3C developers who are trying hard to make this great phone ready for daily use, especially those couple of root/bootloader/recovery hackers!! bilbao1 for the great howto root/backup etc! [NUT]'s for this very cool online kernel builder!
Google, of course
Screen shots please...
I guess its a cm based. So we need unlocked bl right?
shakkirk said:
Screen shots please...
Click to expand...
Click to collapse
It's the same as any Lollipop based PAC ROM, so just search the web for pics.
basti2909 said:
I guess its a cm based. So we need unlocked bl right?
Click to expand...
Click to collapse
Yes.
at least a custom rom for z3c. thanks man for your efforts...
basti2909 said:
I guess its a cm based. So we need unlocked bl right?
Click to expand...
Click to collapse
I think PAC is AOSP & CM based. Custom kernel. Unlocked bootloader, yes.
drorcun said:
at least a custom rom for z3c. thanks man for your efforts...
Click to expand...
Click to collapse
Happy to build actually it's not that difficult with CM device support. Probably I'll build some monthly versions or so...
drorcun said:
at least a custom rom for z3c. thanks man for your efforts...
Click to expand...
Click to collapse
just what i wanted to write. big thanks
hope we can see some more, maybe validus/resurrection remix? (maybe i should get me better informed to do it myself^^)
becks0r said:
just what i wanted to write. big thanks
hope we can see some more, maybe validus/resurrection remix? (maybe i should get me better informed to do it myself^^)
Click to expand...
Click to collapse
:good: In case of resurrection remix you only need to add/edit 1 file (local_manifest) to be able to compile a working rom. All the rest it just setting up ubuntu, init/sync repo an start building ...
Hmm it could be a reason to unlock bootloader.,)
XZDualRecovery
I've uploaded an EXTRA boot.img including XZDualRecovery provided by NUT's! http://nut.xperia-files.com/?ql=34070511dc3ee6809f305c66a5fa122fcbf9dcff
Just flash it before or after installing the PACROM zip. It contains the original kernel + DualRecovery. CyanogenRecovery really sucks, not even a way to make backups. Now we can
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
beflythis said:
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
Click to expand...
Click to collapse
there's nothing like this included. as far as i know custom roms/ custom kernels can't handle drm keys from TA partition. not sure about flashable drm replacement, i don't think it will work, but maybe it does
perhaps someone knows more about this sony image processing stuff.
isn't that all software based? if so, i could imagine that a good camera app (FV-5 or something like) can bring the same results.
Great work mate. Been running a few hours with the updated boot.img
Hopefully there is no "memory leak"
beflythis said:
does this have a camera fix included, or does that need to be flashed separately? I don't have a backed up TA partition, so I rely on the fix for image processing (like many others on here, I'm sure).
thanks in advance and nice to see the ROM!
Click to expand...
Click to collapse
That fix is only useful on stock Sony based rom's.
bugs update
(1) i found a small, almost funny bug. couldn't reboot to recovery today because phone always ended with shutdown. i desperately flashed the boot.img again but no change. only after deactivating everything i thought not being active at installation the problem disappeared.
well, it's the active alarm, that i use every morning ...
(2) in call volume issue seem's to be somewhere hidden in android_device_sony_z3c/audio/mixer_paths.xml of the repo. just in case someone likes to search :laugh:
I have noticed a small bug, could be just me though. When rebooting while plugged in to the USB charger it goes as far as the Sony logo then freezes until I unplug it. How would I go about submitting a bug report for it?
Sent from my Xperia Z3C using Tapatalk
mrrflagg said:
I have noticed a small bug, could be just me though. When rebooting while plugged in to the USB charger it goes as far as the Sony logo then freezes until I unplug it. How would I go about submitting a bug report for it?
Sent from my Xperia Z3C using Tapatalk
Click to expand...
Click to collapse
Hi, thank's for that! I've just reproduced what you wrote. On my phone this is also connected to active alarm clock. It's rebooting fine when alarm is off. So, quite the same as my last post.
I have no suggestion about real bug reports, because of 2 reasons: this is an unofficial build, primarily for myself ... but shared. I would stop building if Z3C would get official PAC support. And I've just started building roms 2 months ago. So, I'm not having the skills (yet) for advanced debugging. Right now it's more like being voluntary apprentice :laugh: ... I'm gonna add your input it into 1st post.
For now stability of this rom is mainly dependent on PACROM itself and official CM support.
Im glad you could reproduce the same bug. I think you have done a great job mate. I'm loving this ROM and appreciate your efforts. I'm trying to figure the dev side of things myself, not having much luck yet.
Sent from my Xperia Z3C using Tapatalk
Good job, m8!
Can someone post a picture, taken by camera on this phone with this rom ?
A picture of a door , or a wall, for example. Any picture featuring a rectangular shape with straight lines.
I had a broblem be4 on CM12 @z3c , the camera ( any camera app ) took pictures, distorting proportions, like there was a fisheye filter applied
Update: Rom link is down so see the original author's thread for latest update and info
Here
MIUI Rom has been ported for LG G2 and all variants are supported. It is not ported by me and, I have no connection with any of the dev, I am just spreading the news. If developers don't like it that, I will remove this thread. So just take it as a news.
Source:
Here is the true origin of Rom --> Here/
Info:
As it is MIUI 8 so it is based upon Android Marshmallow version 6.0.1. So you can expect many new features.
Google play services and play store are included in this rom, So no need to flash any gapps.
Screenshot
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download Link(s):
1: Rom
Mirror: Mega
2: Kernel (For better performance).
3: Supersu
4: SupersuFix
Sound fix: (Thanks to zg85).
For those having no sound issue, Try flashing this modem. (Currently for D802 only. Searching for other variants fix. If anyone have other please tell.).
Here.
Important:
For those with device running Lollipop or other bootloader than Kitkat you can follow this thread to change bootloader to kitkat.
Here.
And
For baseband, You can check this out. (I have not tested any yet, But please tell me if this can solve issues).
Here.
Instructions:
1: Boot into TWRP.
2: Make full wipes. (Leaving internal storage).
3: Flash the rom zip. Select your model. Wait till finished. Don't reboot into system.
4: Flash the kernel after rom installation is completed.
(You need to be at kitkat bootloader and also required baseband of kitkat model for sim to work. So make sure you have all these things
5: Flash supersufix then supersu to get root.
First boot takes some time, So wait at least 15 to 20 minutes for first time.
Disclaimer:
I'm not developers of this rom and any other thing related and mentioned here. So don't complain about any thing. You can ask for help and I will try to help (If i can). But I'm not responsible for any damage to your device or any other things.
Thanks in advance for not complaining me.
Press Thanks button if, I helped you.
Thanks to:
@Cloudyfa for basebands.
XDAVN team for origin of this rom.
Any one other who did any thing for this rom/thread, directly or indirectly.
Most Important:
It's look like that the original developer has created his thread for this rom. So All can find latest fixes and support there.
Here is the Link
http://forum.xda-developers.com/lg-g2/development/mm-miui8-lg-g2-t3502836
Hello, i flashed the rom via TWRP with following the instructions, it has been like 40 minutes and it still not booted. Any idea?
Screen is like:
Fastboot mode started
reset
portcharge
reset
portcharge
STALL GET_DESCRIPTOR 128 6 1006 0 255
fastboot: processing commands
Edit: It was my fault, this rom has to be flashed on a kitkat rom, i was on a lollipop rom.
faceliler said:
Hello, i flashed the rom via TWRP with following the instructions, it has been like 40 minutes and it still not booted. Any idea?
Screen is like:
Fastboot mode started
reset
portcharge
reset
portcharge
STALL GET_DESCRIPTOR 128 6 1006 0 255
fastboot: processing commands
Edit: It was my fault, this rom has to be flashed on a kitkat rom, i was on a lollipop rom.
Click to expand...
Click to collapse
flash KK.bootloader for your phone model
Is google play service included in this ROM? Thank you.
jim380 said:
Is google play service included in this ROM? Thank you.
Click to expand...
Click to collapse
yes included
Pattern lock and Applock is not working
After one day, i can say that there is some bugs, but they are not that big, sometimes its freezing and sometimes its restarting whole system in random moments, also this is not that smooth like AOSP or miui v7 for lg g2, camera is working well, but in my opinion it's slow, movies on snap doesent work (recording, u can record but after this u will see static image). But, other things are good, i'll use it and wait for updates. Hope OTA is working (Sorry for my bad english, if u didnt understand me, i will try to explain it better just pm me)
Will this thread be updated/maintained?
Flashed the ROM and it looks great
But there are some problems.
Sound doesn't work and I can't call either.
Compass doesn't work. AppLock won't work. So as pattern lock.
Any solution for call and sound problem?
Pls help. I love this ROM
No sound is playing... Any patch for it
Southleader said:
Flashed the ROM and it looks great
But there are some problems.
Sound doesn't work and I can't call either.
Compass doesn't work. AppLock won't work. So as pattern lock.
Any solution for call and sound problem?
Pls help. I love this ROM
Click to expand...
Click to collapse
flash modem
aixabdennour said:
flash modem
Click to expand...
Click to collapse
Where can I find the modem?
Could you pls give me a link??
I'm on D805 variant
Southleader said:
Where can I find the modem?
Could you pls give me a link??
I'm on D805 variant
Click to expand...
Click to collapse
https://github.com/danielstuart14/hybrid_caf_bootstacks/tree/LG-CAF/d805-6
aixabdennour said:
what is your phone model!!
Click to expand...
Click to collapse
[deleted post]
jim380 said:
Will this thread be updated/maintained?
Click to expand...
Click to collapse
Yeah, I am here, trying my best to keep this thread updated all new informations. If you or anyone find an info to tell, then I will update it.
Does it really have OTA updates or not?
It really needs to be updated there are so many bugs which need to be fixed
Ai giúp minh vơi bật 3G nhưng sao lại chay tôc đô 2G. Cũng k chon được mang 2G
I followed all instructions here flash rom bootloader modem but when i finished didnt work every time reboot to recovery
Also i flashed kernel but fail
I do not know where is the problem
Aures Batna said:
I followed all instructions here flash rom bootloader modem but when i finished didnt work every time reboot to recovery
Also i flashed kernel but fail
I do not know where is the problem
Click to expand...
Click to collapse
Which variant you are using?
dksoni411 said:
Which variant you are using?
Click to expand...
Click to collapse
Ls980
(7.1) Flyme7. Fingerprint infrared V3 For the Leeco X720 and X727 ( Updated on 9/5/2018 )
AKA: The newest version of Flyme Original Chinese Name : 7to-X720.flyme7.指纹红外V3.zip
Developer: Cold and Ruthless
Original Link: http://rom.7to.cn/romdetail/1030273
Link: https://mega.nz/#F!xYJgXYxK
Key: !QNUTt-aMXA-Kvl39hOMp9A
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Flyme:
LeTV pro3 transplant Flyme7.8.21R V3
Redesigned interface, better overall experience
Advanced settings root card brush package
Optimized sound
Author: Cold ruthless
Release Date: 2018-09-04
Android version: 7.1.x
UI type: Flyme ROM
Size: 1270.00MB
Experience the new interface, with advanced settings, high speed, theming options, and excellent call and sound quality, all are hallmarks of the Meizu Official Experience
Applicable models: LeEco LEX720, LEX727
Optimization of the optimized
volume of the bottom package update sound.
Temperature control based on port from: Charm Blue Note 6 Build
Double Wipe> reboot to Recovery, if you have an error you may need to format storage
The first boot is very slow, please wait for the Meizu official latest experience version transplant
Past Bluetooth issue resolved.
Optimization scheduling
New interface new experience, advanced settings and optimization
Installation Notes:
First Boot may be slow, so if it takes a while for the first system boot, the solution is just to wait longer.
Flyme Account http://forum.flymeos.com/
Create an Official Flyme account if you want to gain access to tons of addons.
Meizu is Port friendly and Flyme Account Provides:
Forum advice
Plugins,
Apps,
3rd party themes etc.
Download Flyme 7 Launcher, Stock Wallpapers, and Apps (Flyme 7 stock APK)
https://www.androidsage.com/2018/05/15/download-flyme-7-launcher-stock-wallpapers-apps-apk/
As always, flash anything under your own discretion
Root
This Rom comes with Magisk root, You can easily flash Magisk 17.1 overtop after setting up the system and then rebooting to recovery.
Gapps: I am using BeansGapps-Mini-7.1.x-20170725.zip
Helpful files:
https://mega.nz/#F!JMYSSCLQ
Key: !xgQFTB69PE-hL8RTUbpUIw
Firmware
https://mega.nz/#F!oAZ3yC4b!
Key: MDwbHXNTRdrpgMvQ42yviw
If you have safetynet issues, follow the steps below
Extract the boot.img file from the rom, and placed the boot image into storage.
Open Magisk and use install to Patch Magisk to the boot.img.
Reboot to recovery, install the patched boot.img to boot
Flash addonsu-15.1-arm-signed.zip, and then reflash Magisk again, from storage then use advanced options to clear cache, and then reboot to system.
With these steps you will always Pass Safetynet and be playstore certified
https://forum.xda-developers.com/showpost.php?p=77367331&postcount=4790
Build Prop Recommendations
After the installation and initial testing period,. you may decide to continuing using Flyme for a while:
If so you can further optimise the ROM with these build prop and edits posted below.
First backup your existing buildprop
* ro.product.locale.language = en ( or your language)
* ro.product.locale.region = IN or your country
* persist.sys.timezone = your country ( see proper entry here: https://gist.github.com/arpit/1035596)
* persist.sys.meizu.region =
or use persist.sys.oem.region= your country google correct acronym for your country
Reserved for future hints
Thanks I will try and feedback
i get error code 3 when i try to flash
rob_z11 said:
i get error code 3 when i try to flash
Click to expand...
Click to collapse
Me Too!
Yes, I tried it and the same thing happened to me, it must be a corrupt download because people are giving the release a 8.3/10. I found a slightly older but highly rated rogue pig version. ( see same link above)
I installed it successfully and must say, it's actually extremely good.
Corruption
The original newer file is probably just corrupted so I am going to try redownloading it. Until then, check out the other version that I placed in the same megadrive folder see the link above. Yes, it's a little older but its actually awesome!
I just attempted to find the newer rom by cold ruthless on the BBS website, has he been banned. I had a bookmark saved and when I click I get this message " Authors are banned or deleted automatically blocked" Not sure if its the same person or not, if this next download is corrupt. I would still recommend flyme_LEX720_rogue_6.8.3.17R-beta, I am testing it right now and like it alot.
Does Android Pay work with this ROM?
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
3llawi said:
I flashed the ROM after the boot I face a black screen and a bar with Chinese written and I can't do anything only control the volume...I only flash the ROM with wipe the data,system and delvic cach
Click to expand...
Click to collapse
It looks like what happened to me when going from an Oreo rom to Nougat, you have to format data not only wipe data. Format data, write "yes" and then install the rom. Always have a backup of your data before.
flyme is one of the best system , the official one is good but it's old , be sure to have eui firmware before flashing flyme .
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Please can you put the link of old recovery version
rob_z11 said:
No issue like this. Everything worked. It booted fine. You may have to use the recovery version from earlier in the month of Jan.
Everything worked for me except volte which is no big deal. Really impressive build. Thanks for downloading @tsongming..
Click to expand...
Click to collapse
Did you format internal storage?
3llawi said:
Did you format internal storage?
Click to expand...
Click to collapse
No because I have always been on miui10
can some1 link me the gapps?
collisiion said:
can some1 link me the gapps?
Click to expand...
Click to collapse
Look at the post #1
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
andrew2401 said:
Does Android Pay work with this ROM?
Click to expand...
Click to collapse
I believe so, though I haven't tried it yet. I will let you know late tonight
tsongming said:
I believe so, though I haven't tried it yet. I will let you know late tonight
Click to expand...
Click to collapse
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
tsongming said:
Thanks to troubleshooting from @ rob_z11, I plan to post a working version of the Cold Ruthless file late tonight EST.
Click to expand...
Click to collapse
Ok, this is what I have found. Your original latest flyme seems to be working ok. Here is what I have done. Using RAR apk, I unzipped it, and it complained about one apk in mizu-apk folder, and I ended up removing that folder completely, and zipped the ROM again. It flashed without any issue, but I can't seem to get Data to turn-on. It turns on briefly during the boot, but it goes away. I think if I compare the build.prop from older version with newer version, I may be able to find the fix.
andrew2401 said:
Okay thank you how's the battery so far?; I've owned Meizu phones and there is was always good for battery optimization
Click to expand...
Click to collapse
Extremely good, at the moment my phone has no OS at all..
I only glanced at battery life briefly yesterday with Gsam battery tool. Plus, I installed BlackScreen 5.3 r2 which worked fine, I would rather wait for a real answer. Otherwise it would just be a guess.
Utimate Q Rom
lots of under the hood tweaks great battery based off stock very debloated same as A20 A30 and A40 now Ultimate Q for A50
Rom Download https://drive.google.com/file/d/1Lx22Z2mzpQmTxQidCMin1846w84Gsg6D/view?usp=sharing
Rom with kernel stock debloated with Magisk https://androidfilehost.com/?fid=4349826312261799780
kernel source https://github.com/prashantpaddune/android_kernel_samsung_a50dd
kernel credits @prashantp01
no Magisk added to rom
flash an enjoy
Telegram https://t.me/ultimate_Pie2
No screens or change log?
also the download no work;
"OOPS!
no mirrors found."
InFam0us-1985 said:
No screens or change log?
also the download no work;
"OOPS!
no mirrors found."
Click to expand...
Click to collapse
check again its working or come to telegram
link has been fixed
Thanks for the new ROM. Will definitely try it and report back. But, I think a features list, bugs (if any) should be posted to op. I went to the telegram group and can't seem to find the rom features for a50.
L3R0N said:
Thanks for the new ROM. Will definitely try it and report back. But, I think a features list, bugs (if any) should be posted to op. I went to the telegram group and can't seem to find the rom features for a50.
Click to expand...
Click to collapse
a20 a30 a40 all have the same rom iam doing a series phone in telegram if you look at photos there is tons and yes ill get a list here eventually
I can't get passed extracting Vendor. What is going on here.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It works for me https://youtu.be/OnALLXFpXGg
install instruction: enter TWRP, format data, reboot to Power off, enter TWRP and install the ROM then Reboot to System ( boot system without magisk ), after Setup the phone, you can boot system with magisk ( Reboot to Recovery )
This works really well. The installation took a bit longer than usual but everything went smoothly (all you need is some patience to let it do its thing). Bootup speed was the usual. I would've loved if Bixby stuff was removed. Also I thought this was a bare minimum install but I got things I don't need or want or use. Items such as Root Explorer, Es file explorer, blue mail, niagara launcher. And they can only be disabled. Maybe remove them from the main build and have them as a flashable addon in the future? Air Command keeps crashing for me so it doesn't work. I don't need it anyway. Overal an awesome rom. Performance is also great. Would this work with Quantum Kernel?
Edit:
Bluetooth devices need to be paired after every reboot. Not sure if this is an issue with everyone or just me. Gotta pair my Galaxy Buds and Galaxy Watch every time I reboot. Also, Samsung Account keeps asking me to login again in order to use Samsung Services securely.
After reboot in root (recovery) mode, device hangs at lock screen and crashes.
shumway66 said:
Utimate Q Rom
Rom Download https://drive.google.com/file/d/1Lx22Z2mzpQmTxQidCMin1846w84Gsg6D/view?usp=sharing
Rom with kernel stock debloated with Magisk https://androidfilehost.com/?fid=4349826312261799780
Click to expand...
Click to collapse
There is no Magisk on the second ROM ( androidfilehost ), but Magisk is included on the First ROM ( google driver ). I think you need add descriptions about these ROMs please... like what different ROM 1 and ROM 2.. Thanks
---------- Post added at 05:50 AM ---------- Previous post was at 05:48 AM ----------
EonOfBlack said:
After reboot in root (recovery) mode, device hangs at lock screen and crashes.
Click to expand...
Click to collapse
First boot, don't reboot to Recovery but Reboot to System, after complete setup the phone then you can Reboot to Recovery ( boot system with magisk )
L3R0N said:
This works really well. The installation took a bit longer than usual but everything went smoothly (all you need is some patience to let it do its thing). Bootup speed was the usual. I would've loved if Bixby stuff was removed. Also I thought this was a bare minimum install but I got things I don't need or want or use. Items such as Root Explorer, Es file explorer, blue mail, niagara launcher. And they can only be disabled. Maybe remove them from the main build and have them as a flashable addon in the future? Air Command keeps crashing for me so it doesn't work. I don't need it anyway. Overal an awesome rom. Performance is also great. Would this work with Quantum Kernel?
Edit:
Bluetooth devices need to be paired after every reboot. Not sure if this is an issue with everyone or just me. Gotta pair my Galaxy Buds and Galaxy Watch every time I reboot. Also, Samsung Account keeps asking me to login again in order to use Samsung Services securely.
Click to expand...
Click to collapse
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
How do you go about this? Flash the rom and then the GSI kernal? or does it not matter?
Just tried to install lineage os 17 but had no joy.
InFam0us-1985 said:
How do you go about this? Flash the rom and then the GSI kernal? or does it not matter?
Just tried to install lineage os 17 but had no joy.
Click to expand...
Click to collapse
This is still oneui so I think you need to use the oneui kernel with it. Flash rom, then kernel.
---------- Post added at 08:49 AM ---------- Previous post was at 08:48 AM ----------
immortalized2018 said:
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
I'll give it another try and see if it is fixed. Or maybe I'll do a clean rom myself. Been a while since I got my hands dirty ?
immortalized2018 said:
There is a magisk module which will let the system remember paired Bluetooth devices so you don't have to pair every time .
To enable air command , make sure you have given it all the permissions .
I'm using Quantum kernel with it .
Click to expand...
Click to collapse
I got the same problems with Bluetooth after I rooted the magisk module mentioned here works very well. I never had to re pair my Bluetooth devices again.
usb debugging ..not working
Just flash Ultimate R tomorrow night the smooth rom workig very well no any bug i found
mehmetuman said:
usb debugging ..not working
Click to expand...
Click to collapse
Working in ultimate R
Work A505GT Android 11 downgrade to Android 10..
You have Ultimate Pie to A505GT?
Can you uninstall the system app without the cell dying ??? and .... Can you bring android pie for binary 7 please
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Build with Gapps Download
Mirror
Vanilla Build Download
Mirror
New Recoveries
New TWRP Download
Donate
Cool-custom-bootlogos
Chagelog:
• Replaced snap camera with Gcam-Go
• Added both Gapps and Vanilla builds
• June patch
• Removed Blur effect that cause glitches in the launcher
SafetyNet can be fixed without root
Notice, you have to flash the BiTGApps-safetynet-patch even if you install the build with Gapps
just flash the rom and the BiTGApps-safetynet-patch together and you are all set.
For the vanila Build you have to flash latest BitGApps plus the BiTGApps-safetynet-patch
steps fo vanilla only:
1. download the Rom, BitGapps, and BiTGApps-safetynet-patch and place them in your external sd-card.
2. flash the Rom then flash BitGApps and finaly flash
BiTGApps-safetynet-patch wipe caches and reboot system.
BitGapps
BiTGApps-safetynet-patch
Credits:
• @jeangraff30 For the source and much more
• All the people who helped me test
By @Broly
Follow @MotoG6update
Works pretty well on my device. For some reason it wouldnt boot at first so I flashed a second time and got it to boot.
Few things though: Fingerprint Navigation works, but does not hide the navbar. There are apps that can hide the navbar without root, but the method they use does not work on android 11. Only option to hide your navbar is to root.
Thank you so much for this firmware ! Everything works very fast and stable ,if there was a way to support the moto camera as it is in the Pixel Experience 10, then this would be the best option !
dimoksa777 said:
Thank you so much for this firmware ! Everything works very fast and stable ,if there was a way to support the moto camera as it is in the Pixel Experience 10, then this would be the best option !
Click to expand...
Click to collapse
I'm waiting for nemesis team to release the camera source code but no ETA
there is many problems with the rom. lags with interface, apps. Not stable rom at all
Rassamah said:
there is many problems with the rom. lags with interface, apps. Not stable rom at all
Click to expand...
Click to collapse
I had no lag problems with this rom, did you use any third party launcher?
Rassamah said:
there is many problems with the rom. lags with interface, apps. Not stable rom at all
Click to expand...
Click to collapse
Sorry there is confuse. I mixed up theme
SafetyNet can be fixed without root using BitGapps
it has to be clean install.
Notice, you have to reboot to recovery before flashing BitGapps
steps:
1. download the Rom and BitGapps and place them in your external sd-card.
2. flash the Rom then reboot to recovery then flash BitGapps
BitGapps
I really like android and again have bootloop, linux/arm/java best stability and quality.... XT1925-5
Broly said:
SafetyNet can be fixed without root using BitGapps
it has to be clean install.
Notice, you have to reboot to recovery before flashing BitGapps
steps:
1. download the Rom and BitGapps and place them in your external sd-card.
2. flash the Rom then reboot to recovery then flash BitGapps
BitGapps
Click to expand...
Click to collapse
Installation aborted, os detected...
i found solution for bootloop, data and cache partitons only works with ext4 in 2021.... but RROS on 10 not have this problem... PLEASE, write about it in first post.. And rom need password to start... WHY
Hi all,
I am loving this ROM, I came over from pixelexp as I was having problems with WiFi calling (provisioning I think,-- had no VoLTE or video calling provisioned ). I have an XT1925-6 on Verizon and not having any issues at all except an occasional reboot. I would be happy to post anything that might help with that, just let me know.
Thanks!
profilelikelihood said:
Hi all,
I am loving this ROM, I came over from pixelexp as I was having problems with WiFi calling (provisioning I think,-- had no VoLTE or video calling provisioned ). I have an XT1925-6 on Verizon and not having any issues at all except an occasional reboot. I would be happy to post anything that might help with that, just let me know.
Thanks!
Click to expand...
Click to collapse
I have same model, did you root it and install some modules and what gapps are you using?
Broly said:
I have same model, did you root it and install some modules and what gapps are you using?
Click to expand...
Click to collapse
I did not root, I was able to do a dirty flash and flashed NikGapps basic. I had to reinstall a few google apps but then they were fine and settings remained. Running quite well aside this one issue, which could possibly be fixed by a clean install.
ironwolf115 said:
i found solution for bootloop, data and cache partitons only works with ext4 in 2021.... but RROS on 10 not have this problem... PLEASE, write about it in first post.. And rom need password to start... WHY
Click to expand...
Click to collapse
I have no Idea what you are talking about, I have no issues installing it.
Broly said:
I have no Idea what you are talking about, I have no issues installing it.
Click to expand...
Click to collapse
Just write on first post about need format after flash and f2fs not supported on cache partition.
ironwolf115 said:
Just write on first post about need format after flash and f2fs not supported on cache partition.
Click to expand...
Click to collapse
You don't need to format after flash, you format before wiping everything like the video show, also I don't know why you need f2fs support on cache, seems like you are having issues with twrp and I`m not the twrp dev and have no issues with it either
Broly said:
You don't need to format after flash, you format before wiping everything like the video show, also I don't know why you need f2fs support on cache, seems like you are having issues with twrp and I`m not the twrp dev and have no issues with it either
Click to expand...
Click to collapse
Why are you all so stubborn just, I wrote to you to point it in the hat to avoid problems in other people in this regard. But no, for some reason you provoke a dispute without foundation as such. Please just write in the bugs that f2fs is causing a bootloop on the cache section. And on why I need it, because with f2fs much more responsive works, than with outdated ext4, but in general on me it would be time to put ntfs everywhere. And no, I don't use telegram because I just don't need it. A bootloop can happen very simply if on the same phone before this crapdroid version 10 stood with f2fs sections. And it just turns out that the person will not even understand what the problems, as I have been here myself with this for several months.
ironwolf115 said:
Why are you all so stubborn just, I wrote to you to point it in the hat to avoid problems in other people in this regard. But no, for some reason you provoke a dispute without foundation as such. Please just write in the bugs that f2fs is causing a bootloop on the cache section. And on why I need it, because with f2fs much more responsive works, than with outdated ext4, but in general on me it would be time to put ntfs everywhere. And no, I don't use telegram because I just don't need it. A bootloop can happen very simply if on the same phone before this crapdroid version 10 stood with f2fs sections. And it just turns out that the person will not even understand what the problems, as I have been here myself with this for several months.
Click to expand...
Click to collapse
I wasn't disputing anything with you, just trying to help you, I'm not changing anything in the original post as your problem has nothing to do with the rom and you seem to be the only person with this problem if someone have the same issue as you they can read your comments, also you can open your own post somewhere else to complain about file systems or whatever, but please if you don't need help stop posting comments here.