Hello.
So when I tryed to update my LG G6 to 9.0 everything went allright but it got stuck on boot screen. I can still go into download mode and fastboot but the device is not rooted nor is bootloader unlocked. Only thing I have is USB debugging.
I tryed reflashing it again through LG UP but it gets stuck at 4% drops this error: Error: 0x81000302, Please use latest DLL LAF Protocol version is not match DLL = 0 Device =117985312.
Then I also tryed to go into download mode and use LG Bridge update recovery fix. But that also didn't work. It dropped this error: update fail error code 0x5a32suffx lg h870.appbk.
And I also tryed using LG Flash Tool 2014 but that also didn't work. It dropped this error: Required info cannot be found. Contact the system administrator...
So please, could anyone help me fix this problem?
Me. Too suffering from the same problem
Did u fix it ??
Babadoo said:
Me. Too suffering from the same problem
Did u fix it ??
Click to expand...
Click to collapse
I have the working lg up with the right version of dll.
If you reply I'll mirror them.
Related
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
zebulon98 said:
as long you can start into download mode, your device is not bricked.
this thread should help installing and using LGUP correctly.
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
you have a KDZ for install?
Click to expand...
Click to collapse
Thanks i did that and it worked. Thx to you mate problem solved
LG G5 Bricked
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
mryo said:
Hi guys...
I messed my LG G5 up trying to flash t-mobile nougat kdz via twrp on my rooted 7.0 vodafone branded phone (i wanted to use the WLAN calling feature).
Nothing works, no buttons pushing + power / up / down volume... The ONLY thing, that makes
a sign of life is the windows-sound when connecting the USB cable... there's a device shown
QUSB__BULK (not properly installed) and that's all..
I tried installing USB drivers for the LG G5 and also the Suite / LGUP / LG Mobile Support Tool / Bridge...
nothing works... is there any possible way to to fix it?
Thanks in advance for any kind of help...
Click to expand...
Click to collapse
there is an answer by autoprime to your question
autoprime said:
The unique programmers required for the G5 for BoardDiag to work are not public so forcing your way into 9008 won't get you anywhere.
Click to expand...
Click to collapse
with 9008 he means qhsusb_bulk. The drivers you will need are from Qualcomm, once BoardDiag files for G5 are public.
were the boarddiag files ever made public?
Facing the Same problem
I am now facing the above mentioned problem. My g5 h850 doesn't do anything and the only sign of life there is when i connect it to my PC and it picks up as Qualcom hs- usb Qdloader 9008 other than that no display no sound from the handset whatsoever tried getting it into download mode but it won't show anything. I installed all the drivers and tried connecting with lg up but it doesn't pick the phone on any com ports. Is my phone completely damaged or can I do something to bring it back to life. Please help someone
qfil with firehose or octoplus may solve your problem
Can't find the required files anywhere
sbacham said:
qfil with firehose or octoplus may solve your problem
Click to expand...
Click to collapse
QFIL needs PrimaryGPT_0.bin file through firmware extractor but no matter what stock firmware i extract I get multiple patch files like PrimaryGPT_0.bin, PrimaryGPT_1.bin, PrimaryGPT_2.bin, PrimaryGPT_3.bin .......PrimaryGPT_7.bin and when I try to get them through emmc it won't recognize any of the GPT files. That's the step where I am stuck plus I can't seem to find the mbn file for H850
I have lg v20, I too hardbricked my phone, when I extract any kdz I got 7 gpt files. primarygpt0 to primarygpt06 as you said.
are you sure we only need primargpt0 to flash via qfil? i think we need proper firehose/ programmer file and rawprogram file
Maybe I hard bricked mine:
Flashed with uppercut in download mode but with every KDZ file in UPGRADE mode I tried , after the second lg logo with sound of wellcome, it freeze and reboot over and over, it seems that crushes in infinite bootloop. Is this hard bricked?
no, this is not hardbricked. atleast you can enter into download mode.
trash195 said:
Hi I messed up with my LG G5, help needed ?
I want to tell u what i did until now.
I want to root my phone:
1. Unlock Bootloader.
2. Install TWRP
3. Messing around in TWRP becaus i dont finde the SuperSU files cause of encryption usw.
4. Want to Swipe all data and start all over again
5. bootet my device normaly and ther is just the Message "Your device software cant be checked for corruption".
I cant do anything now. I tried to factory reset the phone didnt work. The phone doesnt react to any CMD commands.
I cant enter the TWRP.
I used LG UP to flash the device but LG UP doesnt recognizes my phone correctly, neither in USB Download Mode or in the so calles status, where i just got the blackscreen with the Message"Your device software cant be checked for corruption".
Maybe you guys have a solution.
PS. Sorry for bad english
Click to expand...
Click to collapse
Hi . I I would like to know did you slove your problem ? If yes then what you did plz let me know I’m having same problem with my lgh850.
I was running a MarshMallow update for the last 6 months and suddenly today morning I just decided to flash the "rootedsystemh960a.tot" from one of the forums here at XDA. First it did flashed the ROM using LGUP but then the Phone was stuck with LG LOGO for minutes and then I flashed it again with my stock UAE MM 6.0 ROM. It did work. Then I reflashed again hoping for the ROOTED ROM to work on my phone and ever since LGUP is giving me this error code with a message " lgup error code 0x2000 invalid command response" and it keeps crashing. Now I have tried to switch windows and tried to flash many ROMs and it wont stand a chance. Why this error message is coming? Can anyone of you experts figure this out? Even the COM ports are matching at LGUP and in my DEVICE MANAGER. Please help me. I am stuck with this mobile. ...:crying:
Little info about my phone. It is a UAE/DUBAI Variant of LG V10 - H960A, and officially I am not allowed to unlock my BOOTLOADER by the LGE itself. I had tried before bootloader unlock modes.. Anyways its not the point here right now.. The main thing is LGUP is crashing again and again.. Is there any other utility in place of LGUP for flashing LG ROMS ????
Well that .tot file was for Lollipop only that was your mistake in this probably and it has corrupted your system somehow. I'm afraid I have no idea how to deal with this phone as I don't modify this one myself because of the lack of development/devs.
I think there is something called LGFlashTool also.
dannejanne said:
Well that .tot file was for Lollipop only that was your mistake in this probably and it has corrupted your system somehow. I'm afraid I have no idea how to deal with this phone as I don't modify this one myself because of the lack of development/devs.
I think there is something called LGFlashTool also.
Click to expand...
Click to collapse
Even flashtool aint doing a job.. When I try to run Get device info from within the LG FlashTool, the application crashes...God! Cant they develop some stable running apps for their customers?
Hi,
can you enter the download mode on your V10? Then it might be possible to flash a clean (unrooted) MM via LG Bridge. Some time ago I tried to install the latest MM Version V20e on my V10 with LGUP. For some reason that failed and left me with a phone without ROM, too. Afterwards the V10 was not recognized by LGUP anymore.
Luckily I was still able to enter the download mode manually. So I connected the phone to my PC and started LG Bridge which still did recognize it as a V10 H960a. So selecting Firmware update and then clicking in the bottom right corner of the window on a link saying something like "repair flash errors" or "repair update errors" (I'm currently at work and cannot check) did a complete clean install of the latest firmware.
Maybe you're lucky and this works for you too.
cyvr1 said:
Hi,
can you enter the download mode on your V10? Then it might be possible to flash a clean (unrooted) MM via LG Bridge. Some time ago I tried to install the latest MM Version V20e on my V10 with LGUP. For some reason that failed and left me with a phone without ROM, too. Afterwards the V10 was not recognized by LGUP anymore.
Luckily I was still able to enter the download mode manually. So I connected the phone to my PC and started LG Bridge which still did recognize it as a V10 H960a. So selecting Firmware update and then clicking in the bottom right corner of the window on a link saying something like "repair flash errors" or "repair update errors" (I'm currently at work and cannot check) did a complete clean install of the latest firmware.
Maybe you're lucky and this works for you too.
Click to expand...
Click to collapse
Well hello, I found the solution for my problem and I was able to flash the ROM successfully. Its some kind of new utility amalagamated with LGUP and it does flash without any problems. Found out it was related to some corrupt dll file or incompatible file I had in my LGUP library for the ROM FLASHING to fail all the time... You just read this first post on this link and you will be all fine. Trust me ...:highfive::good::fingers-crossed::fingers-crossed:
https://forum.xda-developers.com/lg-g5/development/uppercut-lgup-loader-g5-variants-t3511295
Just dont forget to follow the rules exactly as mentioned and if you can run it in the Virtual Machine I would prefer you to do that but you have to do everything like installing LG DRIVERS + LGUP + LGUP DLL FILE + UPPERCUT as mentioned in this post. Because if you are running antivirus on your PC, it will detect this UPPERCUT TOOL as some trojan horse or some kind of malware. I did that in my VM as I already had my VM configured for my LG V10 Flashing process.
Do it and do let me know should you encounter any problem. May be I can help later on.
hi guys i have lg v10 h901 on lolipop i want to upgrade to nougat
i have firmware when i installed lg up it says unknown model
drivers are installed
on devvice manager it show lg MTP AND YELLOW TRIANGLE please help me to upgrade
I have the same problem.
malik wahab said:
hi guys i have lg v10 h901 on lolipop i want to upgrade to nougat
i have firmware when i installed lg up it says unknown model
drivers are installed
on devvice manager it show lg MTP AND YELLOW TRIANGLE please help me to upgrade
Click to expand...
Click to collapse
I have the same problem with lg v10 h901.
unknown model in lg up.
all drivers are installed.
not going to download mode skipped to fast mode.
showing update in lg- bridge but after download shows can,t updat try again.
same here...still fighting with that since 20 days
Check the back(under battery, label) of the phone and see if it isn't a f600 board it may not be a legitimate h901 but I'm no pro either. maybe it could be that the dll file you have could be the wrong file. any how good luck upgrading and if you already have twrp or root just find a flashable zip.
Hi guys
i have this problem with my phone ( i dont know whats my phone model ... Model NO : H901 and S/W : V10c )
I flashed H90130b_00_0523.kdz 7.0 and my phone has briked . now i unbrick with Qfil
LGUP_8994_DLL_Ver_0_0_3_23 show unknown model and i flash H90120e_00_0316.kdz with UPPERCUT_1.0.0.0 and LGUP_Install_Ver_1_14_3 but rebrick after restart ... i want flash stok V10C with KDZ but dont Found
What can i do now ......
k.pax said:
Hi guys
i have this problem with my phone ( i dont know whats my phone model ... Model NO : H901 and S/W : V10c )
I flashed H90130b_00_0523.kdz 7.0 and my phone has briked . now i unbrick with Qfil
LGUP_8994_DLL_Ver_0_0_3_23 show unknown model and i flash H90120e_00_0316.kdz with UPPERCUT_1.0.0.0 and LGUP_Install_Ver_1_14_3 but rebrick after restart ... i want flash stok V10C with KDZ but dont Found
What can i do now ......
Click to expand...
Click to collapse
well try lg bridge but be-warned it will upgrade you to 7.0 with no root and there is no current safe way to root our phone on 7.0 yet good luck restoring your v10
R800x_user said:
well try lg bridge but be-warned it will upgrade you to 7.0 with no root and there is no current safe way to root our phone on 7.0 yet good luck restoring your v10
Click to expand...
Click to collapse
tnx man ... I try with lg bridge but after reebot rebrick phone
i found my phone model (H901BK) and download H90120l and flash with uppercut and rebrick
what can i do ...
the percentage of battery charge is matter ???? bttery charge is 42% ...
@k.pax alright well have you tried booting into recovery and factory reset? Just curious
R800x_user said:
@k.pax alright well have you tried booting into recovery and factory reset? Just curious
Click to expand...
Click to collapse
yes . hold volum down and show ereas data ( but fast going and reboot ) and show sequrity error ...
@k.pax While in recovery hold the volume down and power button it should show you the stock recovery menu after like a couple of seconds
Hello, i have a bricked phone LG K10 2017 M250n, and I cant flash at all.
I can't connect to LG Bridge because i can't open it and driver for MTP won't install. If i try to flash any downloaded firmware with LGUP it give me error. The phone is stucked on Firmware Update.
LG PC Suite won't open, it apears only image and remains stuck. I don't know what to do.
Please help me, give me answers.
Referring to this thread https://forum.xda-developers.com/lg-g2/general/mega-tut-how-to-fix-bricked-lg-g2-t3055033
I have found a shorter method of unbricking your LG G2 after troubleshooting uppermentioned method for quite some time with no result.
Your phone is stuck at boot in Dload>Download-Mode>Fastboot, mine is LG G2 D802
Your phone will not do Hard Reset when entering recovery and selecting Yes
Windows 10:
- First Install LG G2 Driver. v4.x works fine, I tried many and didn't have any problems in that regard, drivers all work fine
- Download LG Flash Tool 2014, not the fancy new one, but this old version
- Find the most accurate backup .KDZ file of your phone's OS, mine is EU16GB, and the file that worked for me was D80230d_00.kdz. Flashing the wrong rom will result in bootlooping that can be fixed by restarting the process.
1) USB connect your LG G2 in Dload/Fastboot to your PC
2) Run LG Flash Tool 2014 with DEFAULT SETTINGS, press select KDZ file, find the KDZ OEM ROM you found online that matches your phone perfectly, select Normal Flash and click Start
3) Your phone reboots into Firmware Update
Firmware update is the flashing process happening
If it fails you can try again by restarting your phone, or try another KDZ ROM
4) Once the flashing is done the phone restarts itself and boots into the OEM OS
5*) if unsuccessful try a different .kdz, personally I had to try three of them ,_,
i pulled these steps from my memory, i try updating if something is wrong
If I may ask, what do you mean with "1) USB connect your LG G2 in Dload/Fastboot to your PC"?
Could yoiu please elaborate what "in Dload/Fastboot to your PC" means?