Can someone share screenshoot of MTK engineering mode, hardware testing tab on this device please
Related
Hi.
I have just downloaded & installed AABox3 Pro v19.05 and I am unable to connect to my Techno LA6.
How do I get it to detect the phone?
Thanks.
bro you device have Qualcomm or Mtk chipset
fastboot or adb or edl
can anyone confirm that this phone has mtk engineering mode?
Benedict Cumberbatch said:
can anyone confirm that this phone has mtk engineering mode?
Click to expand...
Click to collapse
Yes It has....I am using it
What is the code to access MTK engineer mode? I'm on Android 11 with a Realme 6.
Hi all!
Ive got two CAT S62 Pro.
I understand there isnt a lot of help out there for these models.
One is a repaired phone, the other is brand new which will not boot past FastBoot.
I have tried MultiTools and a few other tools and the phone just reboots back to Fast boot.
Seeing as I have a good working S62, is it possible to transfer the ROM etc? This new phone has never booted furthur and selecting off/start/bootloader/recovery mode, it always restarts to fast boot.
Any help massively appreciated!
In what mode an Android device boots has NOTHING to do with installed ROM. It's a flag set within device's bootloader's settings what this controls.
Try if you can get into edl mode.
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo]
[GUIDE][TOOL] Reboot to EDL mode from FASTBOOT! No More "Test Point Method"! [kenzo] Reboot to EDL mode from FASTBOOT! No more Test Point Method needed ;) Technical Details: Redmi Note 3 support rebooting to EDL in Android Bootloader aboot...
forum.xda-developers.com
Then you might use some tools there.
GitHub - bkerler/edl: Inofficial Qualcomm Firehose / Sahara / Streaming / Diag Tools :)
Inofficial Qualcomm Firehose / Sahara / Streaming / Diag Tools :) - GitHub - bkerler/edl: Inofficial Qualcomm Firehose / Sahara / Streaming / Diag Tools :)
github.com
Create rawprogram0.xml from FFU file and extract partition as raw file
I was searching for the "ffutoraw.exe" file referenced in the "rawprogram0.xml" file from the Xiaomi Mi4 Windows Mobile 10 ROM when I discovered a small tool which can also do the work. Here is the eMMC DL tool v2.15 from Qualcomm. This tool is...
forum.xda-developers.com
Hi guys,
Unfortunately the fastboot edl has the same result
I get the CAT splashscreen, then immediately fastboot screen.
Ive had a look through the next two links, but im struggling a bit outside of my knowledge!
Sorry I wasnt aware where the ROM starts and stops, I thought having a duplicate phone may help some how.
Any help appreciated
MC_Bobizzle said:
I thought having a duplicate phone may help some how.
Click to expand...
Click to collapse
Flashing programs tend to know how to change modes.
Might work. Have to know a lot though I don't.
Both those linked ones has a command reset which sounded promising...
If it's new...
Warranty Repairs | Cat phones
Warranty Repairs Limited Warranty Statement We pride ourselves on the robustness of our durable devices and as a commitment to all our valued customers, we offer a 24 months warranty from the date of purchase on all devices that meet the conditions of the Warranty Statement. For all accessories...
www.catphones.com
is there a TWRP for the CAT62 ?
Hoping for help here. In trying to root this phone, having successfully unlocked bootloader, I am trying to flash back to stock firmware (as rooting went less than well!)
Couldn;t get the MSM download tool to work, so thought I would try the fastboot zip file extraction method!
The only Oxygen OS I can find that has the flash all .bat file is
10.5.5-GLOBAL-NordOxygen_14_OTA_007_all_2008180221_c45e1d5febd1f-FASTBOOT
Which results in looking like its working within cmd with all fastboot instruction seemingly writing to phone. But upon reboot, it just goes back to the qualcomm crashdump screen....!!
Grateful for any help inc getting the MSM download tool working.
Many thanks all
> 10.5.5-GLOBAL-NordOxygen_14_OTA_007_all_2008180221_c45e1d5febd1f-FASTBOOT
It this from Oneplus Nord ? That cannot work on N10 of course.
Qualcomm EDL mode should always work and is your best way to recover the phone.
andreas__ said:
> 10.5.5-GLOBAL-NordOxygen_14_OTA_007_all_2008180221_c45e1d5febd1f-FASTBOOT
It this from Oneplus Nord ? That cannot work on N10 of course.
Qualcomm EDL mode should always work and is your best way to recover the phone.
Click to expand...
Click to collapse
But whats does Qualcomm EDL mode actually look like? A blank screen? Can't find an explanation as to what the screen shows on Qualcomm EDL mode
TheDon13 said:
But whats does Qualcomm EDL mode actually look like? A blank screen? Can't find an explanation as to what the screen shows on Qualcomm EDL mode
Click to expand...
Click to collapse
yes it is a black screen! You know that is in EDL mode when you look into the "Device Manager" in Windows. Further explanation on how to use the tool is in the respective thread https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4204445/.
andreas__ said:
yes it is a black screen! You know that is in EDL mode when you look into the "Device Manager" in Windows. Further explanation on how to use the tool is in the respective thread https://forum.xda-developers.com/t/...l-to-restore-your-device-to-oxygenos.4204445/.
Click to expand...
Click to collapse
Nowhere does it say EDL mode is simply a blank (as if phone off!) screen btw.....
I always press start on msm tool first then either adb reboot edl or make sure phone is off then hold volume buttons
Hello friends my phone was bricked its needs flash but edl mode is shows just few minutes then restarts to fastboot mode how to fix this edl problem please can anyone guide me bcoz I'm in rural area no service center near by me (Realme XT unlocked) advance Thanks....