Unlock phone when opening dual-screen cover - LG G8X ThinQ Questions & Answers

I'm hoping this is an easy settings fix. I've searched online and in settings without success.
I have a pattern screenlock and use smart unlock. If the phone is in an unlocked state (because of smart unlock or a recent unlock) and I open the dual screen, it still shows a lock screen that I have to swipe away. Is there any setting (other than removing a lock altogether) that would enable activity as soon as I open the dual-screen, without having to swipe away the lock screen?
Thanks in advance.

Have you tried the Smart Lock options?
You can keep it unlocked while you have certain devices connected like a smartwatch or wifi signal.

Thanks! I actually am using smart lock. The device is unlocked, but I still have to swipe the lockscreen away, although I don't have to enter my pattern. I was hoping there would be a away to simply open the cover and, if it is already smart unlocked, that it would just pick up where I left off instead of having to swipe first.

Related

Turn off slide to unlock?

At least for me, the hardware button is more than enough accidental turn on protection. Is there anyway to turn off slide to unlock?
When I had my Droid, I remember there were several methods available to do this; but I don't remember what any of them were called or if they are compatible. I know that GoLocker (the GO lock screen replacement) is NOT compatible, at least when installed through the Market.
Try the No Lock app from the market.
After setting up a security pin I have no slide to unlock on my device. I hit a button it asks for the pin i set i type it in and it goes straight to whatever was last on screen without asking me to slide to unlock,

[Q] How to remove remove slide to unlock screen with finger print unlock?

The method with slide to unlock is redundant and annoying. How to remove slide to unlock?
I'm in the same boat.. every time I try to turn on fingerprint unlock, I still have to slide to unlock.. I'm missing something here..
I don't get it. When you have finger print as your unlock method there is no slide to unlock. They are mutually exclusive, you can't have both.
jhericurls said:
I don't get it. When you have finger print as your unlock method there is no slide to unlock. They are mutually exclusive, you can't have both.
Click to expand...
Click to collapse
I have experienced the Slide to Unlock screen when I have a paired bluetooth device that I have listed as trusted. I think this is what these guys are talking about, and it is annoying. I wish it would just unlock to the home screen.
I think you should upgrade to latest firmware, i never got slide to unlock screen when i use finger screen function!
Look attachment!
Sent from my SM-G925F using XDA Free mobile app
Slide to unlock shows when you use the smartlock feature to keep your phone unlocked. It's there to prevent you from butt dialing someone.
Go to secure lock settng > secure lock time and set it to instant.
That way every time u lock your phone it will ask for finger print and will unlock right away
nicksolyom said:
I have experienced the Slide to Unlock screen when I have a paired bluetooth device that I have listed as trusted. I think this is what these guys are talking about, and it is annoying. I wish it would just unlock to the home screen.
Click to expand...
Click to collapse
This man probably has it, your phone will not go to the lockscreen when fingerprint security is checked unless you enabled trusted devices and are near one. It should in that case simply go to the home screen as it does on most devices when similar schemes are enabled but it instead switches to swipe to unlock making the whole thing not only pointless but more work then never enabling trusted devices at all.
Its either a bug or stupidity, hopefully they get it changed.
Make sure you don't have any trusted bluetooth devices set up. If you do, you'll always have to swipe whether fingerprint authentication is enabled or not.
Aha!
odobo said:
Go to secure lock settng > secure lock time and set it to instant.
That way every time u lock your phone it will ask for finger print and will unlock right away
Click to expand...
Click to collapse
Ha- that actually does work as a workaround, but sorry... What I want (and think OP is after) is to just turn off the swipe.
If the phone if unlocked, show me the home screen.
I want to take the risk of the buttdial!
Use case- pick up unlocked phone, press the side button, see home screen. Not swipe to get to home screen.
Don't know if that's a feature request or a rant or just a bit of both.
subs said:
Ha- that actually does work as a workaround, but sorry... What I want (and think OP is after) is to just turn off the swipe.
If the phone if unlocked, show me the home screen.
I want to take the risk of the buttdial!
Use case- pick up unlocked phone, press the side button, see home screen. Not swipe to get to home screen.
Don't know if that's a feature request or a rant or just a bit of both.
Click to expand...
Click to collapse
I tried to use No Lock Home module for Xposed instead of built in Smart Lock. But it doesn't eliminate Swipe to Unlock either.
I had my S6 set up to just require a pattern to unlock. Worked fine for the first 6 months I owned it. But since I allowed Samsung to upgrade my software, a swipe is needed before it will allow a pattern unlock. This happened to my wife's phone too. Thanks for the ****ing annoying "upgrade" Samsung.

fingerprint scanner password

I recently joined android with the s6 edge. I set up the fingerprint scanner password but it ONLY asks fo it when my device has been cut on, or has been locked for a while. when i lock my phone and and hit the home button it says swipe to unlock. how can I get it to where it immediately asked for my fingerprint every single time I want to unlock my phone? Everyones ive seen already does it.
Go to lock & Security in settings and then secure lock settings and make sure its set to lock immediately with power key

Still can't get faceunlock

I've got cyanogenmod 12.1 with android 5.1.2. Normally I use a PIN to unlock my phone but when I'm at home I'd like to just use my face. This doesn't work because I can't get the option for faceunlock.
In Settings -> Lock screen -> Smart lock, trusted faces is on
but in 'choose lock screen', it's not there
and 'Smart lock (Google)' is enabled
Questions:
How do I get faceunlock to work?
How can I use a PIN, except when I'm at home when I want to use faceunlock? I tried setting up trusted places but it didn't work.
imgoingtowin said:
I've got cyanogenmod 12.1 with android 5.1.2. Normally I use a PIN to unlock my phone but when I'm at home I'd like to just use my face. This doesn't work because I can't get the option for faceunlock.
In Settings -> Lock screen -> Smart lock, trusted faces is on
but in 'choose lock screen', it's not there
and 'Smart lock (Google)' is enabled
Questions:
How do I get faceunlock to work?
How can I use a PIN, except when I'm at home when I want to use faceunlock? I tried setting up trusted places but it didn't work.
Click to expand...
Click to collapse
Face unlock is a part of smart lock. Since it's not as secure as pin or password Face unlock (and other unlock methods like trusted place) should be used with a pin or password.
If face unlock is switched on under smart lock and configured. That's mean it's working. To confirm it's working lock with the power button and unlock. Then at the bottom instead of a padlock symbol you will see a small face icon. That means the camera is on and searching for your face.
http://androidwidgetcenter.com/android-tips/enable-face-unlock-android-5-0-lollipop/
Smart unlock methods stops working if u lock your phone using 3rd party apps. Instead of the lock button.
IreshS said:
Face unlock is a part of smart lock. Since it's not as secure as pin or password Face unlock (and other unlock methods like trusted place) should be used with a pin or password.
If face unlock is switched on under smart lock and configured. That's mean it's working. To confirm it's working lock with the power button and unlock. Then at the bottom instead of a padlock symbol you will see a small face icon. That means the camera is on and searching for your face.
http://androidwidgetcenter.com/android-tips/enable-face-unlock-android-5-0-lollipop/
Smart unlock methods stops working if u lock your phone using 3rd party apps. Instead of the lock button.
Click to expand...
Click to collapse
You're linked to instructions didn't work.
Link worked for me. As explained face lock is now an additional unlock method, you need set a primary one first (pin, pattern, password). Then you can select to use trusted face. I have a pattern lock but if the phone recognises my face when I wake it I can just slide to unlock without enter pattern as it recognises me.

[Q] How to reset the autolock pattern ?

Hy.
Some time ago I enabled the autolock feature and since i didn't use it for a while i forgot the pattern
Anyways, i have access to both the watch and the phone and i would like to remove or change the lock pattern but it keeps asking for the old pattern (which i forgot).
So, is there any way to remove the pattern set in Samsung Gear app on the phone ? (under Settings->Auto lock).
Thanks in advance.
P.S. as long as the watch is near the phone i can access the phone without problems, hopefully i don't have to do a factory reset on the phone. Also, the phone is a Note 3 if it matters.
After many trials and errors i managed to remove the lock.
The trick was to get to the Android Device Manager page ( https://www.google.com/android/devicemanager ) and lock the device, this overrides the smart lock set by Samsung Gear. After unlocking the device with the new lock i was able to modify the locking pattern by going to Settings -> Device->Lock Screen->Screen Lock
Note, to use the AutoLock feature you have to set the screen lock to be "Auto lock" option.
So, as long as you can access your device through Android Device Manager you can reset the lock pattern.

Categories

Resources