I bought an unlocked T-Mobile Note 10 and didn't want to see their stupid logo and bloatware and wanted to install the unlocked firmware. I downloaded the latest firmware as well as ODIN from Sammobile (https://www.sammobile.com/samsung/galaxy-note-10/firmware/#SM-N970U1). I ran into two problems:
1. Getting stuck on the setupconnection step
2. <ID:0/007> FAIL! Model mismatch fail
I wanted to post my experience and how I overcame these problems. I hope it helps someone else facing these issues. I'm sure these are obvious to the experts, but for newbies like me, it took a some trial and error.
For the setup connection issue, what worked for me was:
1. Start Odin as admin
2. Start Odin first, then enter download mode on device and connect to the computer. Doing this the other way around always failed in getting stuck on setupconnection. If Odin fails, I had to redo this step, or I'd get this problem again.
For the FAIL! Model mismatch fail issue:
- Don't use Odin from SamMobile. Use the patched one. This is the one I used Odin3 v3.13.1_3B_PatcheD from here https://androidfilehost.com/?fid=11410963190603883035
thanks for the warning/link. i just started looking at info to flash my verizon one to unlocked firmware.
edit2:
used yours and it gave me a missing INI fialure. used the one in here and it gave me the model mismatch fail...confused
edit2:
now it's failing with FAIL! (Auth)
My phone is Rev B2. I think the problem may be that the firmware I found is from Aug so it's probably an older revision ..FML
edit 3 ( or 4? who knows anymore):
I had another one which did have the B1 revision (I didn't take the fimrware update, on the other one, samsung shoved it down my proverbial throat). the one that worked has RP SWREV B1(1,1,1,1,1,1) K1S S1
The one that did not work has B2. I guess I need newer stock ROM files.
SDRebel said:
thanks for the warning/link. i just started looking at info to flash my verizon one to unlocked firmware.
edit2:
used yours and it gave me a missing INI fialure. used the one in here and it gave me the model mismatch fail...confused
edit2:
now it's failing with FAIL! (Auth)
My phone is Rev B2. I think the problem may be that the firmware I found is from Aug so it's probably an older revision ..FML
edit 3 ( or 4? who knows anymore):
I had another one which did have the B1 revision (I didn't take the fimrware update, on the other one, samsung shoved it down my proverbial throat). the one that worked has RP SWREV B1(1,1,1,1,1,1) K1S S1
The one that did not work has B2. I guess I need newer stock ROM files.
Click to expand...
Click to collapse
Did you ever get a successful flash to another firmware for your Verizon Note 10? I also have the Verizon model.
Thanks.
I think you need to download a Odin patched version, I have similar problem with a samsung s20+, try that and see it works
Related
hello forum,
im new here so sorry if this is in the wrong section!
So my problem starts here, i previously Flashed a custom OS onto my phone, Cyanogen Mod 11, when i got bored of it i decided to download the Stock touchwiz android for my Samsung Galaxy S4 i9505, i proceeded to download Odin307, once i had the OS and Odin i opened Odin in Administrator, i choose my file which was extracted and i used the PDA option to choose it, all was fine until it encountered this error (<ID:0/006> Complete(Write) operation failed.)
once that failed i tried to boot the phone where it says "Firmware upgrade encountered an issue. please select recovery mode ion Kies and try again" SO basically i can still get into the Download mode and can get to the Firmware upgrade error screen, that is all, is there a way to fix it? ive tried countless times to flash the stock touchwiz but get the same error message on odin! Please help!
What is the stock version you tied to flash?
Is the drivers installed and phone get recognised in the ODIN and device manager when in download mode?
Have you mistakenly or intentionally ticked re-partition in ODIN?
Did KIES run in background?
there is lot of threads here on XDA on same problem, try one of those our users have suggested like without closing ODIN and reflashing again.
try with another firmware file or ODIN version. here are some links I thought useful. google would help on searching "complete(write) operation failed".
http://forum.xda-developers.com/showthread.php?t=2516513
Flashing
- I tried to flash the vesion 4.3 for samsung galaxy s4 i9505 telstra.
- yes they get recognised and so odes the phone
- after various tries i tried the re-paritition btu initially i did not, only the auto boot.
- didnt have kies installed at the time of flashing
Thanks for the help, ill try tonight to get it sorted.
Mttogo said:
- I tried to flash the vesion 4.3 for samsung galaxy s4 i9505 telstra.
- yes they get recognised and so odes the phone
- after various tries i tried the re-paritition btu initially i did not, only the auto boot.
- didnt have kies installed at the time of flashing
Thanks for the help, ill try tonight to get it sorted.
Click to expand...
Click to collapse
okay, let us know update. repartitioning with pit file is last resort. its better not to play with it. bt if anything doesn't solve this, repartitioning with PIT file would be the last option to try. bt I would rather go for warranty if you have binary counter reseted.
and if you are trying to flash a rom without knox bootloader on a device that had been on knox this error is occurs mostly.
PROBLEM SOLVED: Downloaded newer version of Firmware and that worked. I feel super super dumb for not thinking of that sooner. I was following an older guide to unroot/restore to stock and the newest available link was VREUMJ9 and apparently that was too old.
I'm trying to send my Galaxy Note 2 in for warranty. It had accepted 4.3 OTA but I had rooted it afterward. So I went to restore to stock and unroot so I could send it in. I had just recently done another Note 2 (My dads) back to stock without a hitch so I figured it would be no big deal. Except I forgot one minor detail that his phone didn't take 4.3 OTA and still had unlocked bootloader. So I opened up Odin 3.07 and put PIT file in PIT and VRAMC3 firmware in PDA and hit start and the flash failed. Took me a few seconds to realize that I flashed the wrong firmware and should've been VRUEMJ9. I was panicing and downloaded VRUEMJ9 and attempted to flash that and it wouldn't even start the flash just failed right away. Now ODIN isn't even recognizing the phone anymore. Am I totally screwed here? I've been googling furiously and it sounds like maybe cause I selected a .PIT file it may have hard bricked my device? I just instinctively did that because it was required to make it work correctly on the last phone I did just a few weeks ago.
I can still access download mode but ODIN doesn't show anything in COM window. Trying to boot phone normally shows "Firmware upgrade encountered an issue. Please use Software Repair Assistant & try again" I've tried repeatedly restarting phone and rebooting PC and reinstalling USB drivers. Is "Software Repair Assistant" something I should try? It sounds like Verizon's version of ODIN? http://www.verizonwireless.com/support/knowledge-base-80201/
Any help GREATLY appreciated. I really really really don't have the money to pay full price for this bricked phone Assuming I can't get this fixed and I just send them the phone as-is what are the chances they even notice? Do they test them?
I managed to get ODIN to recognize the phone using a different computer. Upon attempting to flash VRUEMJ9 in PDA of ODIN this happens: http://imgur.com/2msfTEQ
Firmware update start..
sboot.bin
NAND write start!!
FAIL!
All threads completed. (Succeed 0 / Failed 1)
This happens whether I do just the firmware or firmware + PIT. Flashing PIT by itself will succeed and the phone changes to a message saying something about unsupported software and to turn my phone off and take it to Verizon. But it doesn't seem to change anything cause flashing FW still doesn't work. Almost identical error message using ODIN 3.09 figured I would try a newer version of ODIN.
Edit: After reading some more. It sounds like I might have a corrupted NAND which from what I read is only fixable by replacing MB. Is this true? If so how much would it cost to get repaired if I went to a samsung service center?
Hi Guys after some help.
Ended up with a s6 edge, it was originally dropped in a bath, sent off for repair via a 3rd party shop, stayed there for 3 months and came back with factory binary installed on it! I know very little info on it other than it was on 5.02 and passed all hw tests I could do. It was brought from argos unlocked, used on O2 (assuming the same phone that went out came back!)
Just thought it needed a new rom flashing, so downloaded ODIN 3.10.6 and downloaded a 5.02 H3UK stock rom, failed at <ID:0/020> NAND Write Start!!
then I tried a 5.1.1 Vodafone rom and did the same. I then tried a 6.01 rom and it fails at <ID:0/020> cm.bin and now wont even boot into factory binary.
I tried the recovery via smart switch and it doesn't recognise the device to tell me what version of software I need!
I have also tried 2 different computers and a few different usb leads.
Any help would be much appreciated!
Phil750123 said:
Hi Guys after some help.
Ended up with a s6 edge, it was originally dropped in a bath, sent off for repair via a 3rd party shop, stayed there for 3 months and came back with factory binary installed on it! I know very little info on it other than it was on 5.02 and passed all hw tests I could do. It was brought from argos unlocked, used on O2 (assuming the same phone that went out came back!)
Just thought it needed a new rom flashing, so downloaded ODIN 3.10.6 and downloaded a 5.02 H3UK stock rom, failed at <ID:0/020> NAND Write Start!!
then I tried a 5.1.1 Vodafone rom and did the same. I then tried a 6.01 rom and it fails at <ID:0/020> cm.bin and now wont even boot into factory binary.
I tried the recovery via smart switch and it doesn't recognise the device to tell me what version of software I need!
I have also tried 2 different computers and a few different usb leads.
Any help would be much appreciated!
Click to expand...
Click to collapse
If it was bought from argos unlocked it will have generic firmware on it.
Flashing a 3 or Vodafone rom will not work as the partitions are different which is why you are getting fail.
https://www.sammobile.com/firmwares/download/106963/G925FXXS4DPJ2_G925FBTU4DPH1_BTU/
Try to flash this and keep me updated.
Use odin 3.10.6 and ensure odin options are
Auto reboot checked
Repartition UNCHECKED
F.reset time checked
Try to use original Samsung cable.
Hey thanks for the help, i had to flash the 4dp recovery flash (https://forum.xda-developers.com/galaxy-s6-edge/help/downgrade-flash-4dpg2-official-rom-t3419745) then i tried that rom and got further but stuck on hidden.img, removed it from the zip, repacked and its now working fine thanks for the help
Hi folks,
I'm trying to unroot my phone, and have attempted to use the latest version of Odin (3.12), and the latest Stock Firmware that I could find. At this point, I've also tried other versions of Odin (3.11, and various versions of 3.12 -- including the PrinceComsy version and other modified versions), and several versions of the ATT Firmware (G935AUCS2APF2, G935AATT4API2, etc.), and I continue to get the same error message "Complete(Write) operation failed." Once, I got the Dismatch error, but that was likely when I used an older version of Odin.
I don't know what to do at the point. The phone is now soft-bricked, and the only way to get it back on is to flash the old root file that I originally used. That file works just fine, but only for a few days before it starts tripping the updates, etc. Now, the phone won't boot past the AT&T logo.
I've googled and read and looked at every forum I could find to see if there is any info on troubleshooting the issue, but I've come up empty. Other people have had the issue, and have fixed their phones. Mine, not so much.
Can anyone help? Please? BIG please?
hello guys im kinda screwed here. My phone is currently bricked. I can only get into the download mode. I have a n950F/DS and i need the latest august patch firmware asap. All the sites that i visited either have 20 KB speed or requires money. Can someone that already has the firmware upload it to somewhere and give me the link or can i borrow a samfirm acount perhaps?
I have an older firmware from the march update but everytime i go to flash it with odin it gives me an error of sboot.bin and it says "sw rev check fail bootloader device 4 binary 3" on my phone. I tried flashing without the BL of the firmware but then it says kernel rev check fail device 2 binary 1 on my phone.
ANY HELP WILL BE APPRECIATED PLEASE HELP ME OUT KINDA PANICING
2000ftt said:
hello guys im kinda screwed here. My phone is currently bricked. I can only get into the download mode. I have a n950F/DS and i need the latest august patch firmware asap. All the sites that i visited either have 20 KB speed or requires money. Can someone that already has the firmware upload it to somewhere and give me the link or can i borrow a samfirm acount perhaps?
I have an older firmware from the march update but everytime i go to flash it with odin it gives me an error of sboot.bin and it says "sw rev check fail bootloader device 4 binary 3" on my phone. I tried flashing without the BL of the firmware but then it says kernel rev check fail device 2 binary 1 on my phone.
ANY HELP WILL BE APPRECIATED PLEASE HELP ME OUT KINDA PANICING
Click to expand...
Click to collapse
You can use SamFirm or updato.com for faster download speeds. I would just download the latest firmware for your specific variant from there, and then flash it in download mode using the latest version of Odin.
2000ftt said:
hello guys im kinda screwed here. My phone is currently bricked. I can only get into the download mode. I have a n950F/DS and i need the latest august patch firmware asap. All the sites that i visited either have 20 KB speed or requires money. Can someone that already has the firmware upload it to somewhere and give me the link or can i borrow a samfirm acount perhaps?
I have an older firmware from the march update but everytime i go to flash it with odin it gives me an error of sboot.bin and it says "sw rev check fail bootloader device 4 binary 3" on my phone. I tried flashing without the BL of the firmware but then it says kernel rev check fail device 2 binary 1 on my phone.
ANY HELP WILL BE APPRECIATED PLEASE HELP ME OUT KINDA PANICING
Click to expand...
Click to collapse
You have to flash the firmware with august patch using ODIN 3.13....+ 3 files+HOME_CSC.
If you use OXM_CSC to wipe your data you will receive this error message.