I wanted to use ADB to edit files on GTab but it refused to connect as ADB interface. The PC is Vista 32. I pulled the USB driver from the SKD (extras/google/usb_driver/android_winusb.inf) and added two lines according to instructions from this site. When GTab is connected, it has two connections shown in the notification (USB debugging connected and USB connected). On the PC side, it is recognized as a USB disk drive according to the Device Manager. I can uninstall it from the Device Manager and unplug it, but as soon as I plug it back the PC installs a driver automatically and GTab appears under Disk Drives in Device Manager. I also tried using "Update Driver Software" and browsed to the above usb_driver folder but the PC responded with "The best driver ... is already installed." and nothing changed. If I use the "Let me pick ..." and "have disk" option and browse to the driver android_winusb.inf, I get a message "The folder ... does not contain a compatible software driver for your device." Any suggestion on what I should try? Thanks.
I have installed the 10.1.3 Cyanogenmod Rom on my Nook Tablet, and everything was working normally. Specifically, I could connect it to my Winodws XP system via USB and transfer data via MTP. I wanted to repartition the internal storage from the 11 and 1 GB shared. The process required installed ABD, and I didn't understand at first that this processes required ADB access in recovery mode. I was able to repartition the device the way I wanted and reinstall everything, however, afterwards I could no long access this device over USB as an MTP device, or a PTP device, or a USB device. I think this is probably a driver problem, but I don't know what to do to fix it.
I'm using Windows XP SP3, I have Windows Media Player 11.
When I have My Nook set as an MTP device, the system looks like it is installing an MTP drive, but does not complete. The Entry in device manager only describes is as an "MTP Device" but that there is no driver installed, and keeps prompting in the system tray that it is installing an "MTP Device" driver over and over again.
If PTP is selected, is shows as a USB still camera, but I cannot access any thing on it, and in USB mode I just have a USB device in device manager with an "!" on it.
Any suggestion on how I can get the correct drivers reinstalled?
Thank
For me Unfortunately, MTP application has stopped problem is solved !!!
Read my post #6, problem is solved !!! very minor point but we tend to overlook it...
http://forum.xda-developers.com/showthread.php?t=2547187
Do vote me Thanks if your problem is solved...:good:
MTP suddenly stopped working on my desktop running Windows 10 Pro N and I can't transfer files between my devices through USB. I already install the Media Feature Pack for windows before, I reinstalled it but it didn't solve the problem.
In windows Explorer there is just a grayed out USB-Drive and I can't do anything with it.
In the device manager the MTP device is in the 'Other devices' category with a yellow exclamation mark. I tried deleting the driver and updating the driver by selecting 'MTP device' from the driver list but it didn't help.
I tried it with a Oneplus One and a Nexus 7 (2012) and neither of them worked. Adb works fine and MTP works on my laptop, which also runs Windows 10 Pro N with the Media Feature Pack update.
Any help would be appreciated.
bump
I have an Android phone (SO-05D)
I installed both ADB drivers and Sony's driver for the phone.
However the computer (Windows 10) doesn't recognize the phone; it doesn't show up in Explorer.
There are warnings in Device Manager, as seen in the attached screenshot.
I tried to reinstall but same thing happens.
Where could the problem be...?
Any hints appreciated.
Is there any way to access the internal storage through USB without using Huawei's HiSuite program?
I would expect standard mtp or ptp to work, but when I select those options, the only drive that shows up is the HiSuite install "cd".
Thanks in advance!
have you enabled USB debugging on your phone?
If not enable please enable it and try again
I've enabled debugging, but that doesn't change anything.
Surely I should be able to use MTP without needing to enable debugging?
ofcorse, its standart for every phone, but sometimes user dont instal drivers, so we see device, but not storage.
what pc version, mac you use?
on windows, copmuter, right click, device manager, connect phone with pc, there need to be yellow alert simbol, pres on it, instal drivers etc, ofcorse, if you instal hisuite, you shuldnt be problems to connect phone without instaling drivers, because hisuite install all needet things, but who knows, maybe for tohers not working things liek for me
Make sure the drivers are correctly installed for your phone.
In my case, an antivirus software update was causing the MTP driver to malfunction. The yellow caution icon was activated when I went to the 'Connect Phone with PC' tab in the Device Manager (Windows Explorer / This PC + right click / Manage). I opened the antivirus program and it asked me to restart the PC, which I did. After restarting the PC, I connected my phone and I was able to see it as a removable device (a.k.a. external device, a.k.a USB device) and transfer files through Windows Explorer as usual. So, basically, make sure all the Windows Updates and antivirus updates are 'updated'. Best of luck.