Related
Hello,
Recently I got a Samsung Galaxy S2, although I bought it in China. So the firmware I have on it (ZCKG4) is the default firmware giving me Chinese apps and localized settings.
This shouldn't be a problem, although I can't put in Google accounts so, I figured I need to change the firmware some how.
First off is this possible?
If so how?
Thanks.
Just download any firmware and flash it via Odin, simple. You can get the firmwares from here,
http://forum.xda-developers.com/showthread.php?t=1075278
OR
www.samfirmware.com
Regards.
Hi,
I just tried to update my ZCKG4 firmware to XWKF3 but with no luck. The Chinese version seems to lock-up if you do this. You will get a brick every time. I managed to get back to ZNKG5 (no ZCKG4 available).
How to get around this? Will rooting help?
It doesn't brick, it just boot loops. This is normal.
Normally when you crossflash to another firmware, it gets stuck on the Samsung Logo, and loops.
If you are using stock firmware of another country. Just do the following.
1) Turn off the phone
2) Goto Recovery mode (Power + Volume Up + Home)
3) In SAMSUNG's recovery, factory reset it. (Wipe DATA+CACHE)
4) Reboot.
If should work after that.
If you are using 3rd party kernel, which has Clockwork Recovery built in, you cannot use that to erase userdata+cache to factory reset as it will cause boot loop again.
Some Advise:
Always make sure your computer is not having problems before flashing. Run memtest86 to make sure RAM data is not getting corrupted.
Instead of downloading stock ROM from forums, you can download official stock rom using fus downloader
When using ODIN, never repartition, unless you know what it is for.
Hello,
Thanks for the replies, although I am still having trouble.
So I downloaded another firmware and used Odin to install it. Although each time it arrives at failure and either makes the device become corrupted (Although it can be fixed by rooting it) or nothing happens.
So I've found I can root the device fine, although every time I attempt to install another firmware nothing happens and I can't install it.
I've been looking on the forums and found this thread: http://forum.xda-developers.com/showthread.php?t=1192575 and apparently the Chinese SGS2 firmware uses a different format?
Could someone confirm this as at the moment I'm pulling hair out by the minute trying to get the Android Market to appear as well as be able to put in my Google Account details.
Please help
Thanks.
Hi
any help in this case?
i have same problem and do not know how to solve it.
BR/Artur
DUDE!!!
I think i got some good news.
I have the same problem with my new S2 bought in China, no Android market. I've been searching all around the web to try to fix it.
It is still not working for me, but i got a little bit farther though.
I find the hint here
http://forum.xda-developers.com/showthread.php?t=1351283
So what i did and what you can try is:
1) Install GoogleServicesFramework.apk
This seems to be the issue, as when you install it you can see the permissions Google requires, and pretty much says the can access ALL the data in your phone. (It would explain the censorship)
2) Install Android Market with any .apk you can find
3) Launch Android Market
The change for me is i can now input my account login. But it still fails connecting to google to actually login. Maybe because i'm still in china and it blocks the connection.
Could any one try this outside china and tell me if it works?
Cheers
I'm still pretty new to this, But what i've done so far.
Check out a few roms, install them, changed kernels all going fine. Noticed a few issues but they were rom related afaik.
What i didnt do, figure out a way to backup my original kernel. My first backup was after using cf-root.
In kies before i did anything, it said you have the latest firmware and listed check for updates button. Now it says This version of the device cannot be updated.
I've gone back to
Three UK
XWKI4:
Firmware info: PDA: XWKI4 Phone: NEKI1 CSC:H3GKI1
XWKI4 Stock Kernel:
Password: [email protected]
My issue is, even with this kies still doesnt want to even check for updates. What is confusing me is, this package seems to suggest my CSC will be H3GKI1 afterwards, where it only reads CSC:KI1 (KOR)
My understanding is that KOR isnt what i'm looking for, i'm starting to think this is just a kies issue as my phone does read as H3GKI1.
my question really is, does anyone have the default information noted down what 3 uk sgs2 ship with.
And what steps are needed to get kies to like my phone again. I may re ask this when i figure out a way to phrase it better.
You might need to change your CSC by typing *#272*<IMEI># into the dialler (obviously replacing <IMEI> with your IMEI). This will probably reset your phone (and maybe also to factory defaults). Even if it doesn't, you might need to do a reset to factory defaults within recovery to get the new CSC recognised properly.
After much searching i found something out
It appears its my product code that is incorrect, if i check the CSC on my phone, it comes up correct.
Kies still reads my phone as Kor, Ive now seen this is much more comment than i first thought.
Typeing *#272*<IMEI># up brings up what should be a list, but only has Kor listed and no way of changing it.
*#272*<IMEI># seems to be the way forward, but currently doesnt list anything other than Kor and i current have the stock 3 uk firmware on my device.
feck199 said:
Typeing *#272*<IMEI># up brings up what should be a list, but only has Kor listed and no way of changing it.
Click to expand...
Click to collapse
You might need to get the CSC from [ROM+Guide]Official i9100 Firmwares KG, KH1/2/3/4, KI1/2/3/4/8, KJ1/2 Download and try flashing it in Odin as CSC. I'm not familiar with this process though as I've never done it.
Intratech said:
3 Network UK H3GKI1 CSC: http://www.multiupload.com/P8DL2EMO9D
Click to expand...
Click to collapse
My situation was like yours just a day ago.
my galaxy s2 is also 3 network branded but with Danish firmware
I did get KIES to like my phone again.
first I formatted my internal memory (USB storage) in the firmware as it was since i flashed it. This is not the SD card.
In my USB storage internal, it was a mess.
second i flashed the stock 3 network branded firmware (xwke1). After flashed, i connected the phone to KIES and it found the latest update, Now my KIES likes my Galaxy s2 again.
Remember to backup, before erase/formatting the usb storage.
Try these steps, maybe this helps you as it helped me.
I'll try the formatting my internal storage option!
I have already flashed the 3 uk firmware to my device!
Edit, i'll try again later but formatting and flashing didnt do the trick.
Using the stock 3 Network UK H3GKI1 CSC: , my phone reboots, i see the csc on the phone correctly but kies still sees kor. The only thing i know to be out of place on my phone is the product code.
feck199 said:
The only thing i know to be out of place on my phone is the product code.
Click to expand...
Click to collapse
One other place you could check is /system/csc/sales_code.dat
That file says H3G, but the phone doesnt come up as that when plugged in.
I found forum.xda-developers.com/showthread.php?p=11164781 "[HOWTO] Universal CSC & recover product code [ANY ROM] (I5801 supported)
"
Which would let me change the CSC, but sadly there is no H3G file listed atm!
Alright
Maybe i just was lucky. i did this to get a new fresh start by cleaning out the internal storage (usb-storage)
Try erasing/formatting the data and cache in recovery mode and then restart, maybe this helps.
Recovery mode = original android recovery = volume up, home button and power pressing at same time
Kies started working again,
Formatting data + sdcard didnt work!
Installing a kernel with cwm, and formatting data+sdcard+system+cache then installing stock image did work.
Kies is now offering me KI8 update, and says H3G.
I did notice, after installing stock image it reboots once and does a mini install screen before it boots into the os for the first time.
It popped up an error about not been able to write to /system/csc/H3G . Noticed this ealier today, which is what led me onto formatting /system as well. Did still see the error after i formatted but kies worked so i'm happy.
Im glad, i could help.
Maybe the phone just needed a fresh start as a out-of-the-box.
Hey there. First of all I'm sorry of my bad english.
So I bought Galaxy S3 2 weeks ago. I started phones camera and phone suddenly shut down (got bricked?) Phone is not rooted / flashed. It worked well until now. Phone has 24 months warranty/guarantee, so I dont want to lose it by manually flashing.
What happens? Look this video by me:
if embed not working use this: youtube.com/watch?v=W_PsHpAgSpI
*Volume down + menu + power button combination works, but there is no factory reset option*
Can you help me? What I can do?
If only way to rescue phone is to flash it, can you link me a tutorial and if I do it, can I upload phone via Kies anymore? Will it stay "official".
Fundamental element in order to be able to complete the update process of the Galaxy is to have a firmware entirely original. If you have on your phone a test version, root permissions enabled or a modified kernel installed (e.s , CF-Root) will be unable to update.
Kies in fact, in these cases will not be able to recognize the correct version of the software installed on the Galaxy s3.Finally, in order to be able to update without problems with the tool journal Samsung there is a requirement that many neglect themselves and to which do not lend themselves never attention.
Kies allows you to install updates only if the firmware currently installed on the device coincides with the one provided for your Product Code. For the person who has carried out a procedure of root In this case we can do nothing other than install the firmware manually through the tool Odin.Follow the guide Update firmware with odin ;http://forum.xda-developers.com/showthread.php?t=1671969
download firmware stock here;http://www.sammobile.com/firmware/
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Nirman Bhullar said:
Create an account on Sammobile to get the firmware.
Use the Search to find the required firmware – enter your Galaxy S5 model number which you can find in Settings > More > About Device > Build Number.
Download the correct stock Android firmware file that matches with your SGS5 model.
Extract the contents of zip file and you would find a .tar.md5 file.
Also, download Odin 3.09 from here. Extract and save the files on your PC.
How to unbrick Samsung Galaxy S5:
Turn your Samsung Galaxy S5 off, remove battery and re-insert after some ten seconds.
Boot Galaxy S5 in Download Mode.
Launch Odin on your computer and connect your Galaxy S5 to PC using a USB cable.
Once successfully connected, click on the AP button on Odin.
Locate the .tar.md5 stock Android firmware file extracted earlier.
Don’t touch any other settings except ensuring that Re-partitioning is disabled.
Click on the START button to initiate the process.
After the flashing process is finished successfully, it will reboot and you will be able to set it up with your Gmail account
Dont forget to install phone drivers and use stock USB
Click to expand...
Click to collapse
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
RAZERZDAHACKER said:
Ah, you beat me to it. Also OP, don't forget to boot into recovery and wipe the data otherwise you'll be stuck in another bootloop, I don't know why but I have to do this on all devices when flashing stock ROM.
Click to expand...
Click to collapse
Actually I am not a pro but I think Odin do itself
perplexior said:
Hey Guys I'm new to this forum and apologies if this has been covered and would be grateful if someone to point me to the right direction. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
So just briefly the problem at hand : I did an update to 6.0.1 and after this update my fone screen motion sensor stop working, didnt switch when i turn the fone side ways and also the games with motion requirement didnt work. So just recently there was an heartstone(Blizzard game update) I did the update the fone was working fine till i manually did a restart, thats when my s5 g906s went into bootloop. with a little distortion on the bottom right hand corner. Link-drive.google.com/file/d/0BwqxONwTQDjiSkF3VWN0UmpFSHc/view?usp=sharing
1.)I've already tried to restore it with kies3 manually added the S/N and IMEI it completes but same bootloop with a little distortion on the bottom right hand corner.
2.)I tried to go into recovery mode by pressing Power+Home+Volume Up but it wont enter that mode.
3.)I tried to Use Odin with the fone variant with full AP,BL,CP,CSC and pit ODIN loads all files and give me a PASS message but after this when the fone restarts it tries to go into recovering mode(top lefthand in blue) but it just turns off with a vibrate. Link - drive.google.com/file/d/0BwqxONwTQDjiVHV2RGxrSVRRNU0/view?usp=sharing
4.) So i though the recovery is faulty so i tried to flash a recovery unofficial_philz_touch_6.48.4-g906s_hsk.tar but i get this error
<ID:0/005> FAIL! (Auth)
<OSM> All threads completed. (succeed 0 / failed 1)
After this i read some threads saying I need root so i tried to flash from autoroot_chainfire_eu but same <ID:0/005> FAIL! (Auth) error.
Now im just stuck, what am i doing wrong? Please if someone can help me out a little would mean a great deal, thanks.
Click to expand...
Click to collapse
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
it sound like the recovery image is corrupted, try SmartSwitch, is a tool from Samsung. Use Emergency software recovery n Initialisation
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
akrambasyari said:
hai, i having same problem like you with my sm-g906s
before having this issue, my phone is working fine with with android 6.0.1 (PDA G906SKSU1CPF3 | build: 2016-07-10),
than 2 days ago i decided to upgrade it to (PDA G906SKSU1CPL1 | build: 2017-01-03), all the firmware i get from sam mobile.
odin process is working fine, and pass it until my phone showing my homescreen, and i can do anything even installing some aplication from playstore. just looks like it working fine, but im not tested all sensor with this firmware.
the problem is starting when i restart my phone, my phone is having bootloop, no recovery mode, and having same screen distortion like yours, in the bottom right corner.
after that i doing flash again, trying get back to G906SKSU1CPF3 version, but not working good. odin pass it, but bootloop issue still happen. after that, i trying download all android 6.01 and one version of 5.0.1 at sammobile, and flash it one by one, nothing work with my phone. trying to install twrp recovery with odin, is also not work. it confused me, because i dont know what im doing wrong
the phone work, after installing android 4.4.2 G906SKSU1ANFI | build: 2014-06-29. it can fix bootloop, and in this case, i can use my phone again, but with old firmware, screen distortion issue, and not working motion sensor..
installing twrp recovery 3.0.0-0 v4 can be done with odin with this 4.4.2 firmware, but twrp v5 and above is not working.
i get this recovery from https://forum.xda-developers.com/galaxy-s5/development/recovery-twrp-recovery-v2-8-7-0-t3199011
after that, i using twrp to wipe my phone, with hope it can fix the problem, but nothing happen even after wiping system, and reflash again 4.4.2 with odin. until now still having same problem, but at least i can use my phone
hope you discover better solution, and share with me, because im not sure this is hardware problem.
Click to expand...
Click to collapse
Please check your pm box and see if the link helps you.
---------- Post added at 09:57 PM ---------- Previous post was at 09:55 PM ----------
ali.akbar01 said:
@akrambasyari
dear do u have the below mentioned firmware file? If u have, then kindly do share with me. I am facing too much trouble in downloading it from Sammobile.
File (PDA G906SKSU1CPL1 | build: 2017-01-03)
Click to expand...
Click to collapse
Please check your pm box. See if the link helps you.
I have a similar problem with my Sm-G906S too......
--------Post deleted as I have posted the solution I found on the following thread.------------
https://forum.xda-developers.com/ga...ner-thread-t2807639/post77083953#post77083953
My phone is/was a Samsung S5 Neo (SM-G903M) running Android 5.1.1.
I was trying to root the phone to use Titanium Backup, I got a CF-Auto-Root file and used Odin to load the md5 file. I need this root to backup my phone, so I don't have any backup.
The first time, I followed all the instructions and when it reboot I got a red pirate, bootloader locked and the log:
/sbin/unzip: permission denied
/sbin/chcon: permission denied
Then, I tried another CF-Auto-Root file and now my phone is restarting and can't load (bootloop).
1) Is there a way to extract the cache.img and recovery.img file from a stock rom and use Odin to load them?
2) Is there another way to fix this phone with root or not?
3) My wife was the same phone,is it possible to get some file from her phone and fix mine?
It's probably better to flash whole rom if you got warning for bootloader locked but yeah, you can extract from firmware. Open tar.md5 as archive and extract what you want. Make a new tar with the extracted files and flash with odin.
[Solution]
1) Download a stock rom from: https://www.sammobile.com/firmwares/database/SM-G903M/
2) Untar cache.img and recovery.img
3) Download tar-Tool_Odin3-v3.10.7 from: https://forum.xda-developers.com/showthread.php?t=2446269
4) Unzip and copy cache.img and recovery.img to tar-Tool folder
5) Use the batch.bat to create a tar.md5 file from cache.img and recovery.img
6) Download Odin
7) Follow these instructions:
7.1/ Extract it somewhere and launch it in administrator mode.
7.2/ Put your phone in download mode.
To do it, press & maintain 3 buttons (Menu, volume down & power). Then push "Volume up"
7.3/ Quit Kies. Connect your phone to your PC. Odin will detect it in ID :COM
7.4/ Select "AP" and select the file created by tar-Tool in folder "AllFiles"
7.5/ Verify that only "Auto reboot" & "F-reset" is ticked. Click on Start.
7.6/ Wait till the phone reboots.
Grillox said:
My phone is/was a Samsung S5 Neo (SM-G903M) running Android 5.1.1.
I was trying to root the phone to use Titanium Backup, I got a CF-Auto-Root file and used Odin to load the md5 file. I need this root to backup my phone, so I don't have any backup.
The first time, I followed all the instructions and when it reboot I got a red pirate, bootloader locked and the log:
/sbin/unzip: permission denied
/sbin/chcon: permission denied
Then, I tried another CF-Auto-Root file and now my phone is restarting and can't load (bootloop).
1) Is there a way to extract the cache.img and recovery.img file from a stock rom and use Odin to load them?
2) Is there another way to fix this phone with root or not?
3) My wife was the same phone,is it possible to get some file from her phone and fix mine?
Click to expand...
Click to collapse
In my opinion u need to flash the stock firmware ur mobile was running before the root with odin....u can download from site samsung firmware.You will have to find the exact firmware u were running and your country.thats only way from my opinion.Then try again with autoroot and please download the cf autoroot file only made for lollipop version.I hope u have flashed the correct cf autooot file.
i am very suspicious of my fiance of two years now that she's cheating on me, she has changed passwords to every account that she has, plus put a pin lock on her phone, i have been searching for ways to retrieve her text messages without installing any software on her phone or having access to it, so far i am not having any luck. we have a 19 year history together, plus a beautiful 18 year old daughter & this is eating me up inside. But i finally burst on this page from Google and found the God eye who changed my whole story for good! He help me hack her FB, her emails and her phone number and i got to see all his messages and apps from her phone. only for me to found out she's cheating and have a son out there without my consent but i thank the God eye for letting me know all this and am moving on fine with my life and my daughter. He's also involved in any sort of hacking issues. Hurray!! Get to him on (Godeyeviewhacker AT hotmail DOT com)
thalidomide1111 said:
In my opinion u need to flash the stock firmware ur mobile was running before the root with odin....u can download from site samsung firmware.You will have to find the exact firmware u were running and your country.thats only way from my opinion.Then try again with autoroot and please download the cf autoroot file only made for lollipop version.I hope u have flashed the correct cf autooot file.
Click to expand...
Click to collapse
The solution I wrote solved my problem. And guess what? My phone is rooted.
Gentlemen, I tried flashing cf-auto-root for M variant (firmware is at UBU1BPK1), but after ODIN Pass! it reboots and just show the message "Recovery is not seandroid enforced".
After that, it reboots again to normal firmware, not rooted.
I even tried un-checking the "auto reboot" option in ODIN, and doing a manual reboot to recovery mode (as it was supposed to force the cf-root to install).
But it just repeats the same behaviour. I kept holding vol_up+button+power and it kept rebooting trying to enter recovery but just showing the message "recovery is not seandroid enforced".
At the time I released the buttons, it rebooted to normal firmware, not rooted.
Tried different Odin versions (3.10.6, 3.12...), nothing did the trick.
Any tips? May I have to try the F variant? (my phone is dual sim, don't know if it'd disable second sim slot)
I've also enabled "USB debug" and "unlocked OEM" under developer settings.
Couldn't find "reactivation lock" option under account settings / security settings.
ciberglo said:
Gentlemen, I tried flashing cf-auto-root for M variant (firmware is at UBU1BPK1), but after ODIN Pass! it reboots and just show the message "Recovery is not seandroid enforced".
After that, it reboots again to normal firmware, not rooted.
I even tried un-checking the "auto reboot" option in ODIN, and doing a manual reboot to recovery mode (as it was supposed to force the cf-root to install).
But it just repeats the same behaviour. I kept holding vol_up+button+power and it kept rebooting trying to enter recovery but just showing the message "recovery is not seandroid enforced".
At the time I released the buttons, it rebooted to normal firmware, not rooted.
Tried different Odin versions (3.10.6, 3.12...), nothing did the trick.
Any tips? May I have to try the F variant? (my phone is dual sim, don't know if it'd disable second sim slot)
I've also enabled "USB debug" and "unlocked OEM" under developer settings.
Couldn't find "reactivation lock" option under account settings / security settings.
Click to expand...
Click to collapse
Just to add that I finally got it working.
Flashed a different country variant (BVO - Bolivia), that has BQA1 firmware and also have the same Modem/CP Version as my ZTO (Brazil) in BPF1. I was afraid of choosing a different variant from Brazil with different modem version, and being not able to use my local area signal provider.
It worked like a charm. I wiped data/factory reset. Then I flashed the BQA1 firmware using ODIN 3.12.3 (last version). Logged in google account (didn't logged on samsung account, neither choosed a lock screen).
Then, flashed cf-auto-root from autoroot.chainfire.eu for g903m BQA1 and it worked like a charm!
Genuine Hacker
I really have to thank Kieran for her review I read on veronica's blog. I've been in search of a genuine hacker for a while to help me hack my husband and a website but I was scammed repeatedly by fakes. After reading kiearan's review on black butcher, I thought it was just another lie but when I dug dip and read other reviews, the hacker turned out highly recommended by other people too. I contacted the hacker and decided to have faith in him. The hacker delivered and I was really impressed... he gave me full access to my husband's phone and hacked the website I wanted without any problem. Now I see why everyone is talking about this hacker and I'm going to join the train. For us looking for reliable hacker, you can imagine my joy after being scammed to finally see someone truthful to get it done. His contact is Blackbutcher.hacker at outlook dot com. contact him and stop being scammed by these fakes out there. My sister also tried him to boost her credit score and clear her credit card debt and he delivered so I can guarantee he's real and knows what he's doing. Thank you black butcher.