Installing the OTA update 11.5.141 via TWRP (with gdrive uploaded update zip) - Lenovo Z5 Pro GT Guides, News, & Discussion

Obs: these were the steps that i did to get it, try it by your own risk
----------------------update------------------------
Some people are saying that can't get the 11.1.021 via ota from zui10, but I got the information that this version of qfil 11.1.021 is getting ota to the 11.5, so you should try it just changing the files in the tutorial of step 1 and if don't get the ota, jump to the step 3
-------------------------------------------------------
I did the first part with my bootloader locked, and just got it working this way. I tried to qfil directly the 11.1.021 or use the version updated with the bootloader unlocked but i got error 7 later.
To start, you will need adb and fastboot, and you can get them from here
1- Qfil the zui 10 version from this tutorial
2- Set up a pin (it will be important) and update the zui to version 11.1.021 (right after you install the zui 10 it will pop the update, if not you can use the zui update app)
3- Now that you have 11.1.021 from ota you have to go to fastboot mode (adb reboot bootloader) and unlock your bootloader, if you do this on zui 10 or zui 11.5 you will got on bootloop and have to start all again (tutorial <- you can use this to lock your bootloader for start the proccess too)
4- Go again to bootloader and use fastboot flash recovery twrp.img (download twrp)
5- From fastboot mode, press volume down repeatly until you see "Recovery mode" then press power button, the phone will reboot twice and enter in twrp, you will need to put the pin set on step 2
6- Pass this update zip to your phone from the PC then select it on "install" section and swipe to flash (this was the step where i got error 7 with qfil version of 11.1.021, if you got this, the only solution i know is start all over again owith qfil zui 10)
7- After flash is done, go back to the home page of twrp, select "wipe" and mark "dalvik", "cache" and "data" then reboot system
Your phone will be on bootloop and this is the part that i discover after 2 days trying
8- Turn off your phone and turn it back pressing the power button and the volume down to enter in fastboot mode, you will see on last line that your bootloader will be locked again, and this is the cause of bootloop
9- Use the commands to unlock bootloader again (fastboot flash unlock your_unlock_img.img and fastboot oem unlock-go)
Your phone will boot and reboot in twrp that will do an automatic process, than will reboot again in ZUI 11.5.141 (may take some minutes)
Obs²: After this proccess, if you want to use TWRP to install a rom or something, you will need to flash it again

when I try to install just I got error 7 for everstep :S how can I solve it ?

brujaboy said:
when I try to install just I got error 7 for everstep :S how can I solve it ?
Click to expand...
Click to collapse
Did you try it from qfil the zui 10 with the locked bootloader?
Because i got this error when i ota updated from 10 to 11.1.021 with the bootloader unlocked

Astronomico said:
Did you try it from qfil the zui 10 with the locked bootloader?
Because i got this error when i ota updated from 10 to 11.1.021 with the bootloader unlocked
Click to expand...
Click to collapse
yes I did my friend I installed zui10 with QFIL after that I ınstalled 11.0.21 with twrp and when I try to install 11.5 I got error 7, I did edit with notepad++ but still have this problem

brujaboy said:
yes I did my friend I installed zui10 with QFIL after that I ınstalled 11.0.21 with twrp and when I try to install 11.5 I got error 7, I did edit with notepad++ but still have this problem
Click to expand...
Click to collapse
I think the problem is with the version you're installing in TWRP , after qfil zui10, wait for the OTA for 11.1.021 of the app zui update, it seems to exist some versions of 11.1.021 and the TWRP version is not the same of the OTA
The version of 11.1.021 that i've got by OTA with my bootloader already unlocked on zui10 got error 7 too, just the version i've got with the bootloader locked worked

Astronomico said:
I think the problem is with the version you're installing in TWRP , after qfil zui10, wait for the OTA for 11.1.021 of the app zui update, it seems to exist some versions of 11.1.021 and the TWRP version is not the same of the OTA
The version of 11.1.021 that i've got by OTA with my bootloader already unlocked on zui10 got error 7 too, just the version i've got with the bootloader locked worked
Click to expand...
Click to collapse
we need wait thank u bro

Microsoft Windows [Version 10.0.18362.657]
(c) 2019 Microsoft Corporation. All rights reserved.
C:\Program Files (x86)\Minimal ADB and Fastboot> adb reboot bootloader
error: no devices/emulators found
C:\Program Files (x86)\Minimal ADB and Fastboot>
Click to expand...
Click to collapse
Fixed
this is whilest in fastboot.. ^^
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
View attachment 4951729
it pushes a command when phone was on but when in fastboot / bootloader nothing ? any ideas?
Fixed

every time i push recovery img twrp via ADB it gets bootloader loop

leerh said:
every time i push recovery img twrp via ADB it gets bootloader loop
Click to expand...
Click to collapse
That's weird, i've uploaded the same img i used on mine smartphone, it reboot twice, but starts after in my case, i just got bootloop after unlock the bootloader, but never after flash the twrp...
Try to turn your phone on holding the vol down button to enter in fastboot and check if it's really unlocked, since you flashed the twrp, you will need it
Btw, try to use the files of this tutorial

Astronomico said:
That's weird, i've uploaded the same img i used on mine smartphone, it reboot twice, but starts after in my case, i just got bootloop after unlock the bootloader, but never after flash the twrp...
Try to turn your phone on holding the vol down button to enter in fastboot and check if it's really unlocked, since you flashed the twrp, you will need it
Btw, try to use the files of this tutorial
Click to expand...
Click to collapse
yhyh it says device is unlocked ive used unlock image from lenovo site to unlock it.
im currently on 11.1.021 st cant install twrp affter installing keeps booting to bootloader (unlocked) from here i will need to use qfill to get stock firmware 10.5.304 cn version stock recovery still works
ive also tried on ZUI_10.5.304 same thing
qill emergency flash dose not lock bootloader for me? well i cant twrps anymore makes me feel its step away from total brick
do i need to lock it then qfill then 11.1.021st via OTA then unlock it

I've Just googled It and i found that flash magisk could repair the twrp bootloop, because magisk changes the boot.img that is the cause of the problem
You can download It on magiskmanager site, put it on your phone, than use twrp install session to flash it
And Qfil doesn't Lock your bootloader

Astronomico said:
I've Just googled It and i found that flash magisk could repair the twrp bootloop, because magisk changes the boot.img that is the cause of the problem
You can download It on magiskmanager site, put it on your phone, than use twrp install session to flash it
And Qfil doesn't Lock your bootloader
Click to expand...
Click to collapse
thanks for looking into it for me and i will try this out now and let you know the results done.
this a fresh from factory flash so there is no magisk modules. can you post the links to the information you found.. i cant flash any files affter installing twrps which is successful the via ADB but affter the reboot or trying twrps or access phone or recovery will bootloop my phone to go into fast boot every single time...
can i install twrps on 10.304 and 11.021 both are offical cn roms? device has to be unlocked right which it is? is there any place i can get stock recovry image?
i wanna try= fastboot flash boot_a stockboot.img=fastboot flash boot_b stockboot.img
but i dont think i should as qfil provides stock factory flash? means its fully fresh?

leerh said:
thanks for looking into it for me and i will try this out now and let you know the results done.
this a fresh from factory flash so there is no magisk modules. can you post the links to the information you found.. i cant flash any files affter installing twrps which is successful the via ADB but affter the reboot or trying twrps or access phone or recovery will bootloop my phone to go into fast boot every single time...
can i install twrps on 10.304 and 11.021 both are offical cn roms? device has to be unlocked right which it is? is there any place i can get stock recovry image?
i wanna try= fastboot flash boot_a stockboot.img=fastboot flash boot_b stockboot.img
but i dont think i should as qfil provides stock factory flash? means its fully fresh?
Click to expand...
Click to collapse
Oh, i thought you could access the twrp after install it, sorry
The tutorial on step 1 provides the official cn rom zui10, if you use it, your phone will probably boot normally.
I think you should lock your bootloader and use the official, you will have the updates via OTA, since you can't use TWRP, I think it will be the best for you, I don't know how help you more :/

I have a request anyone can share with my twrp back up clear update without data like zip file because I have problem with my QFIL and when I try to install zui 10.5 give me sahara error and I thought about this option

brujaboy said:
I have a request anyone can share with my twrp back up clear update without data like zip file because I have problem with my QFIL and when I try to install zui 10.5 give me sahara error and I thought about this option
Click to expand...
Click to collapse
Sorry, i didn't see it, but saraha error is probably caused because wrong version of USB drivers in your PC, or you're being too slow to press "download content" on qfil after plug the phone (I don't know exactly why, but you have to click it fairly fast)

Astronomico said:
Sorry, i didn't see it, but saraha error is probably caused because wrong version of USB drivers in your PC, or you're being too slow to press "download content" on qfil after plug the phone (I don't know exactly why, but you have to click it fairly fast)
Click to expand...
Click to collapse
doesn't matter, thank u so much for replying yesterday I installed all of driver versions but I saw still again and I find another method like pushing very fast download click button and I did successfully 11.1.021 thank u so much again for supporting

Astronomico said:
Obs: these were the steps that i did to get it, try it by your own risk
I did the first part with my bootloader locked, and just got it working this way. I tried to qfil directly the 11.1.021 or use the version updated with the bootloader unlocked but i got error 7 later.
To start, you will need adb and fastboot, and you can get them from here
1- Qfil the zui 10 version from this tutorial
2- Set up a pin (it will be important) and update the zui to version 11.1.021 (right after you install the zui 10 it will pop the update, if not you can use the zui update app)
3- Now that you have 11.1.021 from ota you have to go to fastboot mode (adb reboot bootloader) and unlock your bootloader, if you do this on zui 10 or zui 11.5 you will got on bootloop and have to start all again (tutorial <- you can use this to lock your bootloader for start the proccess too)
4- Go again to bootloader and use fastboot flash recovery twrp.img (download twrp)
5- From fastboot mode, press volume down repeatly until you see "Recovery mode" then press power button, the phone will reboot twice and enter in twrp, you will need to put the pin set on step 2
6- Pass this update zip to your phone from the PC then select it on "install" section and swipe to flash (this was the step where i got error 7 with qfil version of 11.1.021, if you got this, the only solution i know is start all over again owith qfil zui 10)
7- After flash is done, go back to the home page of twrp, select "wipe" and mark "dalvik", "cache" and "data" then reboot system
Your phone will be on bootloop and this is the part that i discover after 2 days trying
8- Turn off your phone and turn it back pressing the power button and the volume down to enter in fastboot mode, you will see on last line that your bootloader will be locked again, and this is the cause of bootloop
9- Use the commands to unlock bootloader again (fastboot flash unlock your_unlock_img.img and fastboot oem-unlock go)
Your phone will boot and reboot in twrp that will do an automatic process, than will reboot again in ZUI 11.5.141 (may take some minutes)
Obs²: After this proccess, if you want to use TWRP to install a rom or something, you will need to flash it again
Click to expand...
Click to collapse
Hi bro. I see a little error in your command: The second command in the 9th step is wrong, the correct command is: "fastboot oem unlock-go".
Greetings.

leerh said:
yhyh it says device is unlocked ive used unlock image from lenovo site to unlock it.
im currently on 11.1.021 st cant install twrp affter installing keeps booting to bootloader (unlocked) from here i will need to use qfill to get stock firmware 10.5.304 cn version stock recovery still works
ive also tried on ZUI_10.5.304 same thing
qill emergency flash dose not lock bootloader for me? well i cant twrps anymore makes me feel its step away from total brick
do i need to lock it then qfill then 11.1.021st via OTA then unlock it
Click to expand...
Click to collapse
i got step 1,2,3,4,5 and 6, got an error #7.
so i used the tutorial to flash the device in step 1
it was unable to update cuz bootloader was unlock
i locked bootloader and update to 11.1.021
so afther that, i unlocked again to install twrp.
intalled twrp and transfer file to phone
booted twrp and installed the zip, got the error 7 again.

lipeneiva said:
i got step 1,2,3,4,5 and 6, got an error #7.
so i used the tutorial to flash the device in step 1
it was unable to update cuz bootloader was unlock
i locked bootloader and update to 11.1.021
so afther that, i unlocked again to install twrp.
intalled twrp and transfer file to phone
booted twrp and installed the zip, got the error 7 again.
Click to expand...
Click to collapse
best thing is to try again an follow every letter and step this only way to install 11.5 (beta) did u set a pin it is needed ive not seen another guide to install android 10

Lombachita said:
Hi bro. I see a little error in your command: The second command in the 9th step is wrong, the correct command is: "fastboot oem unlock-go".
Greetings.
Click to expand...
Click to collapse
Ops, fixed

Related

[PLK-L01] Stuck on Honor screen

Pretty inexperienced with Andriod after taking the leap from IOS.
Rooted my honor 7 using Kingoroot everything worked fine then I let me phones battery die whilst at work came home to charge it up and now it's stuck in a boot loop/honor screen.
So far I have tried to let it automatically download the ROM using the EMUI recovery that fails completely.
I tried using HiSuite to recover that gets to 90% then gets stuck.
Finally I have tried every single honor 7 ROM i can find in an attempt to install via SD card every time I have it tells me version check fail.
Only had the phone couple of months anything I can do to recover it/repair?
Many thanks
Markus
did you unlock bootloader before rooting? you could use adb to flash stock rom....
next time dont follow youtube guides titled "how to root any android phone", on android theres way bigger change to bootloop or brick your device while messing with root, custom recovery and custom roms than on iOS. in this thread you will have all info beginner needs about honor 7 rooting, fixing and customizing: https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
thelous said:
did you unlock bootloader before rooting? you could use adb to flash stock rom....
next time dont follow youtube guides titled "how to root any android phone", on android theres way bigger change to bootloop or brick your device while messing with root, custom recovery and custom roms than on iOS. in this thread you will have all info beginner needs about honor 7 rooting, fixing and customizing: https://forum.xda-developers.com/honor-7/general/guide-beginners-how-to-root-update-fix-t3255452
Click to expand...
Click to collapse
Thanks for the reply and no I did not as I wasn't aware it needed to be done however in fastboot it says Phone Unlocked and the fastboot oem get-bootinfo also says (bootloader) unlocked.
Yet I am still unable to to flash as Command not allowed is appearing when I try.
I have tried following the guide to aquire my unlock password from the huawei site how ever it tells me my details i.e serial number and imei are incorrect.
Really appreciate the help , thank you
Markus
markuswhiteus said:
Thanks for the reply and no I did not as I wasn't aware it needed to be done however in fastboot it says Phone Unlocked and the fastboot oem get-bootinfo also says (bootloader) unlocked.
Yet I am still unable to to flash as Command not allowed is appearing when I try.
I have tried following the guide to aquire my unlock password from the huawei site how ever it tells me my details i.e serial number and imei are incorrect.
Really appreciate the help , thank you
Markus
Click to expand...
Click to collapse
i think rooting app unlocked it wrong(caused bootloop) and messed something up....
Get the B380 update from Honor site and do a forced update ( if you've already been on B380).
It should work after that.
Sebster97 said:
Get the B380 update from Honor site and do a forced update ( if you've already been on B380).
It should work after that.
Click to expand...
Click to collapse
Tried that get a version check fail.
btw did you install xposed? it doesnt work on emui... just bootloops
What version are you current on? B380?
I assume that this KingoRoot thing messed up your SYSTEM Partition and thats why it bootloops. To fix this do this:
If you're on B380, go and get the B380 full update from the official Honor site and extract it so that you can see the UPDATE.APP file.
Then get the Huawei Update extractor from here : https://forum.xda-developers.com/showthread.php?t=2433454
Open it and extract the SYSTEM.img and the BOOT.img
If you are familiar with adb do this: (if not, ask what to do)
copy SYSTEM.img to your adb folder. Connect your phone in fastboot mode, and enter in cmd: "fastboot flash boot boot.img"
and after its done:
"fastboot flash system SYSTEM.img" (everything without quotation marks obviously)
It will take some time, be patient. If it's done just write: fastboot reboot
and lets hope it works for you !
Sebster97 said:
What version are you current on? B380?
I assume that this KingoRoot thing messed up your SYSTEM Partition and thats why it bootloops. To fix this do this:
If you're on B380, go and get the B380 full update from the official Honor site and extract it so that you can see the UPDATE.APP file.
Then get the Huawei Update extractor from here : https://forum.xda-developers.com/showthread.php?t=2433454
Open it and extract the SYSTEM.img and the BOOT.img
If you are familiar with adb do this: (if not, ask what to do)
copy SYSTEM.img to your adb folder. Connect your phone in fastboot mode, and enter in cmd: "fastboot flash boot boot.img"
and after its done:
"fastboot flash system SYSTEM.img" (everything without quotation marks obviously)
It will take some time, be patient. If it's done just write: fastboot reboot
and lets hope it works for you !
Click to expand...
Click to collapse
Tried that gota wait for the unlock code to flash the ROM on and no I never used xposed

Complete Guide to Unlocking, Installing TWRP, and LineageOS w/ Root on A2017U

Quick notes:
ALL files/software needed are linked below
Process only confirmed working for this model, A2017U
Desktop PC used is on Windows 10 x64, no 3rd Party Antivirus
I assume you have ADB installed on your computer, but if not here is an easy guide:
https://forum.xda-developers.com/showthread.php?p=48915118#post48915118
Also assumed you have the Axon7 connected to PC via USB cable
Here's the steps I took, with info compiled and reorganized from the two guides linked at bottom of post:
1. The downgrade from B15 Nougat to B29 Marshmallow
(skip to step 2 if you are already on B29)​
A- Download the full B29 software package, provided by ZTE on their website. Select the support tab halfway down the page, then select the software updates to download the .ZIP (mirror provided at bottom in case ZTE changes things)
B- Download it, unzip it once, then put the update.zip file on your SD card.
C- Turn on OEM unlocking in the Axon Settings Menu (it is needed to flash from sd card)
You can do this by navigating to Settings -> About phone -> Tap "Build number" 7 times.
Now navigate to Settings -> Advanced settings -> Developer options -> Enable "OEM unlocking".
D- Boot phone to recovery - [Power] + [Volume Up] key combo - Release the keys when you see the ZTE logo.
E- Choose update from sd card, then pick the update.zip from the sdcard
F- The phone will flash the B29 software. It is a bit slow, have patience and let it do what it needs to do.
2. Unlocking Bootloader and installing TWRP​
A- Install the Qualcomm QUSB_BULK drivers. You should be able to simply extract them, then right click qcser.inf and press Install.
B- Boot the Axon7 into EDL mode. [Power] + [Volume Up] + [Volume Down]
C- Your device should be recognized in Windows’ Device Manager as a COM port called "Qualcomm HS-USB QDLoader 9008".
D- Download and Unzip the FASTBOOT_UNLOCK EDL file.
E- Install MiFlash on your computer. Open the program.
F- In MiFlash, Select the folder "A2017U_FASTBOOT_UNLOCK_EDL". Use the child folder inside containing fastboot.img and other files. Do not use the parent folder containing the META-INF folder, it caused flashing to fail for me.
G- Now just hit [flash] - watch the progress bars move and wait for the device row to turn green with flash complete!
H- Use [Power] + [Volume Up] key combo to exit EDL mode and enter recovery
I- Open CMD window as admin, and use "fastboot oem unlock" command to unlock (and wipe) your device. When prompted on Axon7, select Yes to unlock bootloader
J- Reboot phone into EDL mode
K- Return to MiFlash, Select the folder "A2017U_B29_TWRP_EDL". Click [refresh] if device row shows anything under status.
L- Now just hit [flash] like before - watch the progress bars move and wait for the device row to turn green with flash complete!
M-Reboot phone to TWRP
If the flash fails or is unable to communicate with the device, use the [Power] + [Volume Up] + [Volume Down] key combo to restart EDL mode.
Release the keys after 5 seconds then wait another 5 seconds before using the [refresh] or [flash] buttons on MiFlash.
3. Installing Lineage OS With Root​
A- Using TWRP, Wipe the device (data/cache/dalvik, all that stuff)
B- Install the Universal Bootloader (A2017X_B15_Universal_Bootloader.zip), and modem (A2017U_N_Modem.zip)
C- Install Lineage OS ROM .zip, with root addon (addonsu-arm64-signed.zip)
D- Install Gapps
E- Restart Axon7, enjoy!
Thanks to the reply made by u/tabletalker7 on my last thread, I now have an unlocked bootloader, TWRP, and LineageOS with root. 10/10 !
DOWNLOADS:​
Official ZTE B29 Marshmallow Software Package:
ZTE Website
Gdrive Mirror
Qualcomm QUSB_BULK Drivers: (WHQL certified)
Click here to download
FASTBOOT_UNLOCK EDL Package:
Click here to download
TWRP for A2017U EDL Package:
Click here to download
Universal Bootloader and Modem packages for A2017U:
Click here to download
Lineage Official Builds:
Click here to download
Lineage OS root addon:
Click here to download
Open GApps: (arm64) (use 7.1 if using Lineage 14.1)
Click here to download
CREDITS:​
[OFFICIAL] LineageOS 14.1 for ZTE Axon 7 by Unjustified Dev:
https://forum.xda-developers.com/axon-7/development/unofficial-lineageos-14-1-zte-axon-7-t3545679
[EDL][A2017/A2017U] Emergency DL Mode TWRP + Unlock + Upgrade By jcadduono:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Downgrading is not necessary.
Downgrading step is not necessary, upgrading Bootloader and modem neither.
So, is the bootloader unlockable on Nougat? Could someone link me to a guide?
sdaddy said:
So, is the bootloader unlockable on Nougat? Could someone link me to a guide?
Click to expand...
Click to collapse
A-Yes
B- Read from post #1
I am getting an error when I try to flash FASTBOOT_UNLOCK EDL with MiFlash. Error is "can not found file flash_all_except_storage.bat". Anyone else seeing this?
Now make a guide to go back to stock
lafester said:
Downgrading is not necessary.
Click to expand...
Click to collapse
The fewer steps the better, of course.
So if we are on B15, we can just skip section 1 of the guide, and the rest of the steps will work without the downgrade to B29?
Excited to try this, since I've used CM ever since it was the cat's pajamas on the HTC G1/Dream but haven't even rooted the Axon 7 yet.
im getting "cannot read hello packet" and failing write
Unlocking problem
Hi guys
i flashed the "A2017U_FASTBOOT_UNLOCK_EDL" successfully but i could't run the "fastboot oem unlock" in cmd ...Then i flashed the "A2017U_B29_TWRP_EDL"
and now i can't enter to recovey ( neither stock nor twrp)
is there anyone can help me...:crying:
mortkarg5 said:
Hi guys
i flashed the "A2017U_FASTBOOT_UNLOCK_EDL" successfully but i could't run the "fastboot oem unlock" in cmd ...Then i flashed the "A2017U_B29_TWRP_EDL"
and now i can't enter to recovey ( neither stock nor twrp)
is there anyone can help me...:crying:
Click to expand...
Click to collapse
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
vinicioh23 said:
Now make a guide to go back to stock
Click to expand...
Click to collapse
Going back to stock is easy peasy.
use the official update from ZTE, place update.zip on sdcard
boot to recovery and wipe (cache/data/system) then flash update.zip
reboot and you're back to stock
want to lock the bootloader too?
boot to fastboot
fastboot oem lock
sauerkraut17 said:
Going back to stock is easy peasy.
use the official update from ZTE, place update.zip on sdcard
boot to recovery and wipe (cache/data/system) then flash update.zip
reboot and you're back to stock
want to lock the bootloader too?
boot to fastboot
fastboot oem lock
Click to expand...
Click to collapse
Thanks!
I can flash the fastbook unlock in MiFlash, but I get stuck trying to actually unlock the bootloader afterwards. ADB recognizes the device when it's turned on, but when it's in recovery, it doesn't recognize it at all. So I am lost as to what to do.
Edit: Alright, I got it to work. I just went into bootloader and unlocked instead of recovery. Maybe I misread the instructions but all of your other instructions were spot on! Thanks
Is there any way to do this on a macbook?
williamthardy said:
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
I saw it before...
My problem began when i forget to install ADB drivers and flashed twrp before unlock bootloader by cmd
I can not boot into recovery
Neither android stock recovery nor twrp
Is there any way to flash the stock recovery in EDL mode?
I don't know how to delete my comments, but yohobojo helped me figure out my problems. Just chose reboot into bootloader in recovery screen.
mortkarg5 said:
I saw it before...
My problem began when i forget to install ADB drivers and flashed twrp before unlock bootloader by cmd
I can not boot into recovery
Neither android stock recovery nor twrp
Is there any way to flash the stock recovery in EDL mode?
Click to expand...
Click to collapse
Yes, there is a one flash installation fix. Installed B15-NEW_FULL (Nougat) twice to recover from failed LOS installs.
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
williamthardy said:
Yes, there is a one flash installation fix. Installed B15-NEW_FULL (Nougat) twice to recover from failed LOS installs.
https://forum.xda-developers.com/axon-7/development/edl-emergency-dl-mode-twrp-unlock-t3553514
Click to expand...
Click to collapse
Thank you bro...
I had flashed it before i send these posts...
But failed
I now need another way
After flashing the Fastboot unlock EDL, I can get into recovery but I get no indication my computer detects my phone when it is in recovery. Halp?

Fastboot not working

Hi everyone !
Some month ago I flashed on my device a beta test of Nougat for Honor 5c. Yesterday I wanted to leave it and go back to a stable rom but I was unable to find a flashable ZIP of stock Rom so I used FlashFire to flash a update.app firmware package (some **** from Huawei...).
After flashing it I tried to reboot my phone but I just got a Error Mode - Please update your system again. (and Recovery image error + load error)
To solve this I reboot to fastboot and on my computer I tried to flash TWRP with fastboot flash recovery twrp.img and I got a error : remote : command not allowed. I search and search and search on forums but I found nothing.
I tried some other fastboot commands, i tried to boot from a img, ... but nothing, just Command not allowed.
I have a Honor 5c NEM-L51, fastboot is "working" lol, no recovery, no force dload update, bootloader unlocked, FRP lock (idk what is this), i was rooted with Magisk and I flashed the package with FlashFire.
Please help me :crying:
Siffrein

Bricked STF-L09 C185

I screwed up my phone lol, when I was updating it to oreo, I didn't know that the update.zip file was corrupted.
Now I'm stuck on
Error!
Func NO : 9 (hifi image)
Error NO : 1 (security image failed)
My version was...
STF-L09C185B170
What i tried to install that failed is...
STF-L09C185B361 (8.0.0.361)
I can still go to fastboot with everything unlocked, I can also flash a twrp recovery, but only by typing flash recovery_ramdisk(instead "recovery"), and when I try to do the update method by pressing vol up, vol down, and power, it doesnt take me to the update section, it just show me a crashed screen, then goes back to error message.
I also tried volup and power, I can't seem to go to twrp(I think booting to twrp and flashing zip files can be one of the only ways to fix this). Is there a way to go to twrp recovery using fastboot?
I've also tried flashing extracted files from update.app manually, it doesn't work. Some files can be flashed, while some can't.
Please I'm begging u guys, pls halp :crying:
also I guess the lesson here is: double check if your file is corrupted before installing/flashing
First, what is the way you took triying to update ?
(When done from system UI, official or FF, there is an integrity check of downloaded files.)
It seems you got oreo partition scheme during your failed update.
First see this guide:
https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441
Try to restore using erecovery. (download and update firmware via wifi)
If not working you could use HWOTA8.
For launching recovery (stock or twrp) from bootloader type "fastboot reboot recovery".
oslo83 said:
First, what is the way you took triying to update ?
(When done from system UI, official or FF, there is an integrity check of downloaded files.)
It seems you got oreo partition scheme during your failed update.
First see this guide:
https://forum.xda-developers.com/mate-8/general/fastboot-erecovery-recovery-upgrade-mode-t3543441
Try to restore using erecovery. (download and update firmware via wifi)
If not working you could use HWOTA8.
For launching recovery (stock or twrp) from bootloader type "fastboot reboot recovery".
Click to expand...
Click to collapse
I downloaded the oreo file using a browser and installed it with HWOTA, everything got inserted into my device, but the update failed and it gave me the error when I reboot. Also I can't get to erecovery or upgrade mode(that's the crashed screen), and "fastboot reboot recovery" doesn't work, it just show me a list of commands(which I assume happens if the command is invalid).
Ok I'll try HWOTA8, but I need to configure it so it recognizes my device, only my adb recognizes it.
Do 'fastboot devices work'?
Try english hwota8.
oslo83 said:
Do 'fastboot devices work'?
Try english hwota8.
Click to expand...
Click to collapse
Nah, I figured it out, I backed up my adb folder and just merged hwota8 with it. Yes, it does work.
Btw how do I fully turn off the device? it just keeps bootlooping if i hold down the volup and power key, maybe this is the reason why I can't get into twrp recovery.
My only hope is that I can flash something on fastboot that will let me go to update mode(or erecovery) or twrp.
Like.. anything, even boot.img fails when I try to flash it. It must be stuck on oreo partition.
Also I did considered dc phoenix, but I don't have the money to pay for an account. Man, why is unbricking not free on huawei devices? That guy prolly made a fortune by now(for holding everyone with unbrick leverage lel), and it's a huge mistake for me to fiddle with a huawei device, it has so many problems with twrp and root.
If anyone can find a way to do unbrick it, like anything, that would be great.
So you didn't manage to use honor9's hwota8 ?
oslo83 said:
So you didn't manage to use honor9's hwota8 ?
Click to expand...
Click to collapse
I used it but it didn't worked, I need to be either booted in the phone's os or inside twrp recovery bec. all of the commands executed by hwota8 are adb shell, not fastboot. Like I said, I only have access to fastboot, but I'll try again tomorrow. This is taking a lot of my time and I'm having panic attacks that I may not be able to fix this lol. Oh yeah, thanks for helping out.
Note: Since Oreo, partitions names have changed ; "recovery" changed to "recovery_ramdisk" now.
Use this command to flash recovery: fastboot flash recovery_ramdisk YourStockOrTwrpRecovery.img
Use oreo stock recovery or oreo twrp.
But I thought with hwotas available for honor 9 you started from bootloader...
oslo83 said:
Note: Since Oreo, partitions names have changed ; "recovery" changed to "recovery_ramdisk" now.
Use this command to flash recovery: fastboot flash recovery_ramdisk YourStockOrTwrpRecovery.img
Use oreo stock recovery or oreo twrp.
But I thought with hwotas available for honor 9 you started from bootloader...
Click to expand...
Click to collapse
I already did that, read the OP. Like I said, I can't boot into any recovery, not twrp not stock, not even upgrade mode, nothing.
As for hwota8, nope, it doesnt start from the bootloader, it's already trying to use the adb shell commands.
Anyway I'm taking all chances, I'm trying to research oreo's partitions names, and I'm also trying to find out how to bypass this message "FAILED (remote: Command not allowed)" bec. it might be the only way I can salvage this phone.
edit: ok im trying hwota8 again, maybe i missed something, and yes it has fastboot, sorry i was rushing but im trying again now, i'll post my progress later

Help me with Realme 7 bootloop no fastboot or recovery available

I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
you should have flashed vbmeta.img so that you don't get in bootloop
You mean your phone wouldn't go into bootloader by "Vol. down button + power button" holding from power off state?
T59y9 said:
fastboot flash magisk_patched.img
Click to expand...
Click to collapse
Do you mean "fastboot flash recovery magisk_patched.img"??
the correct command is fastboot flash boot magisk_patched.img
Maybe he wrote fastboot flash magisk_patched .img
but I think it would have returned an error
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
Maybe the rom you downloaded and the base rom running on your device is not the same version, that may cause the error. {Mod edit}
@T59y9
Hi
did you solve in some way?
My realme 7 5G is not rooted.
Just arrived me friday, I udated to new firmware trought recovery. After the reboot did not woke up anymore.
Black screen. no realme logo. nothing.
tried all button combinations, nothing. no boot, no logo, recovery, no fastboot.
tried also with charger attached, with usb on PC.
Nothing...
Any idea to solve my problem?
thank you.
how did you unlock the bootloader?
in depth test app says my model does not support in-depth test
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
gannjunior said:
if you are asking me, I did not unlock anything.
just flashing new OS update trought recovery. after that device dead. not buttons combinations to get fastboot or anything else...
Click to expand...
Click to collapse
oh sorry
any idea how to solve?
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
same anyone know how to solve this pls :/
First you all. Say the Model Number. You talk about Realme 7/Pro or 5G...
This issues is fixable. Just need extra tools to bypass Google FRP and a factory images ROM versions. Fixed few devices with the same situation!
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
T59y9 said:
I unlocked the bootloader succesfully then i tried to root the phone so i downloaded a relame 7 rom and patched boot.img with magisk then i did a fastboot then i typed in my pc cmd (fastboot flash magisk_patched.img) then (fastboot reboot) then i stucked at bootloop and i can't go to fastboot or recovery , Even the pc don't detect my phone, I think its because i downloaded a rom of newer version that i didn't update to it before flashing the patched boot or maybe i typed wrong cmd , Please any help guys there isn't any realme support center in my country, Thanks in advance.
Click to expand...
Click to collapse
did you find soultion of this at now because i also have same problem?
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
martinbrettphilo said:
I've done the same thing I accidently typed "fastboot flash recovery magisk_patched.img" and now I cannot get out of the boot loop as there is no way due to messed up recovery + boot. I have been reading about finding and downloading a firmware in zip format that can be flashed with "SP Flash Tool" but when I try I cannot get it to work. The Firmware should be for the Realme 7 5G [RMX2111].
If anyone else can figure it out.... Please help!
Click to expand...
Click to collapse
It'll be kinda hard. You're gonna have to find a stock ROM - not an OTA update - and you're gonna need to use python to extract the contents from the .OFP file. This should be it. https://firmwarefile.com/oppo-realme-7-5g-rmx2111
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
immns said:
basically you can follow this tutorial
the only difference is you have to use realme 7 firmware not C3. this is ofp file for rmx2151 you can extract it with ofp extractor. also I link this guide for RMX2155. its bootloader unlock guide for RMX2155, but you also follow that guide to revive RMX2151 (until step 10 is sufficient, unless you want unlocked bootloader too)
SF Flash tool is a quite useful for flashing/unbrick Mediatek phones. just read instruction more carefully from now
Click to expand...
Click to collapse
good. this for Realme 7 :
- Textguide : https://telegra.ph/Hard-Brick-Fix-for-Realme-7-01-25
hello guys, i'm having a problem here, I just installed a pixel plus ui and then installed the magisk app, then I renamed it to a zip file as mentioned in the website and went to flash it on my phone (Realme 7) after flashing successfully completed I pressed the reboot to system option, now it's stuck on the realme logo and doesn't budge anymore... I'm really worried please help me.

Categories

Resources