Hello everyone.
I am new to the forum I am from France for 3 years.
I have a technical question about the honor 7 .
I imported china PLK - TL01H version that works very well.
I unlock the bootloader and ROOTE the phone. (Thanks to you).:good:
When I try to install the official rom europe, the installation stops at 90 %.
I need this in order to have Roma French 4g network.
( currently I 'm only H +).
Do you have a tip for me?
Thank you in advance to you.
The Huawei recovery doesn't allow EU roms on Chinese models and vice verca due to the specs of them being different . It might work if you extract the update.app and install it manually via adb though
Sent from my PLK-L01 using XDA Free mobile app
Hi there,
Can you give some more information about this?
I have an european version, but i would like to flash the chinese version.
How can i do that safely so if there is something worng i can go back to stock rom and avoid a brik?
Thank you so much
Hey guys, i've come across some bugs while installing the RMX1921EX_11_C.02 version from the Indian site to my phone and i would like some clarifications or help if someone faced those and overcame them.
- To begin with let me start by saying that I bought a global Realme XT with the firmware being RMX1921EX_11_A.05.
- I then managed to brick cyclops the device by trying to install RMX1921EX_11_A.10. Phone wouldn't boot, stuck on the Realme black/white logo.
- I managed to install RMX1921EX_11_A.06 through recovery and sd card.
- Then I downloaded from the Indian support site and installed through file manager the version RMX1921EX_11_C.02.
Now, on this version everything seems to work ok minus some bugs:
- Phone gets a bit laggy sometimes
- Brightness in automatic mode is not working
- Software update through settings won't work. Crashes a while after opening
- Battery life seems affected, won't last anyway near to what it was on RMX1921EX_11_A.05
So my question is, has anyone experienced any of those and found a solution to the bugs?
Also, is there anyway to obtain and roll back to the original stock rom RMX1921EX_11_A.05 from the beginning and then wait for the official OTA update?
Thank you in advance
Are you sure your phone firmware is RMX1921EX_11_A.05. (India version) not RMX1921EUEX (global version)?
If your firmware is India version, you should be able to unlock the bootloader and install twrp.
donkeyman1234 said:
Are you sure your phone firmware is RMX1921EX_11_A.05. (India version) not RMX1921EUEX (global version)?
If your firmware is India version, you should be able to unlock the bootloader and install twrp.
Click to expand...
Click to collapse
Yes, absolutely sure but im confused as RMX1921EX_11_A.05. is supposed to India version which my phone had but then the place i bought it was advertised as the global version and also i didn't receive the official ota update through the phone's update settings (and supposedly having the indian version). Seriously, realme's firmware naming and distribution is so confusing and impractical. but let's say i indee have the indian version, what does unlocking the bootloader and installing twrp mean? how will that help me and are there any cons into doing that? Thanks man
unlock the bootloader you can root the phone
https://forum.xda-developers.com/re...ecovery-unofficial-twrp-realme-5-pro-t3985459
My XT is was some as the global version. But from what I'm reading this says I'm using the Indian version? But I have NFC. This is so confusing. Bought this phone thinking I could unlock and root.
This confusing but normal. I bought two EU phones with NFC. One for me and one for my girlfriend. She is still on RMX1921EX_11_A.05.
I updatet my Phone to A.06 and when i look in phonedetails is called RMX1921EX_11_A.06.
I read that A.05 can be unlocked in the other thread. I would test this by myself, but yeah i don't want drama with my girlsfriends phone.
So i don't touch it
schwatter said:
This confusing but normal. I bought two EU phones with NFC. One for me and one for my girlfriend. She is still on RMX1921EX_11_A.05.
I updatet my Phone to A.06 and when i look in phonedetails is called RMX1921EX_11_A.06.
I read that A.05 can be unlocked in the other thread. I would test this by myself, but yeah i don't want drama with my girlsfriends phone.
So i don't touch it
Click to expand...
Click to collapse
India version comes with no NFC. You can try Depth test apk , it won't hurt your phone even you pass it. Let us know if your global version can pass it or not.
mario0788 said:
Hey guys, i've come across some bugs while installing the RMX1921EX_11_C.02 version from the Indian site to my phone and i would like some clarifications or help if someone faced those and overcame them.
- To begin with let me start by saying that I bought a global Realme XT with the firmware being RMX1921EX_11_A.05.
- I then managed to brick cyclops the device by trying to install RMX1921EX_11_A.10. Phone wouldn't boot, stuck on the Realme black/white logo.
- I managed to install RMX1921EX_11_A.06 through recovery and sd card.
- Then I downloaded from the Indian support site and installed through file manager the version RMX1921EX_11_C.02.
Now, on this version everything seems to work ok minus some bugs:
- Phone gets a bit laggy sometimes
- Brightness in automatic mode is not working
- Software update through settings won't work. Crashes a while after opening
- Battery life seems affected, won't last anyway near to what it was on RMX1921EX_11_A.05
So my question is, has anyone experienced any of those and found a solution to the bugs?
Also, is there anyway to obtain and roll back to the original stock rom RMX1921EX_11_A.05 from the beginning and then wait for the official OTA update?
Thank you in advance
Click to expand...
Click to collapse
Try this post
https://forum.xda-developers.com/realme-xt/help/realme-ui-bugs-eu-device-t4076145
donkeyman1234 said:
Try this post
https://forum.xda-developers.com/realme-xt/help/realme-ui-bugs-eu-device-t4076145
Click to expand...
Click to collapse
Brother I sincerely thank you for point out that to me!! Much appreciated!!
Hi Everyone,
I've recently bought a Oppo Reno 3 Pro 5G dual SIM from China and I would like to unlock the bootloader to flash an oversea version firmware (with GMS framework). I have enabled the Developer option and OEM Unlocking function and I am having difficulty to get into Fastboot mode. With the phone powered off, I press the volume down button + power button and it only boots into recovery mode. Can someone please point me to the right direction? I also need some help of finding the right firmware for this model and flashing tool. I found this firmware Oppo_Reno 3_Pro_5G_PCRM00_11_A.02_191215.ofp online and not sure if that would be the right one.
Thanks,
Joe
jone886 said:
Hi Everyone,
I've recently bought a Oppo Reno 3 Pro 5G dual SIM from China and I would like to unlock the bootloader to flash an oversea version firmware (with GMS framework). I have enabled the Developer option and OEM Unlocking function and I am having difficulty to get into Fastboot mode. With the phone powered off, I press the volume down button + power button and it only boots into recovery mode. Can someone please point me to the right direction? I also need some help of finding the right firmware for this model and flashing tool. I found this firmware Oppo_Reno 3_Pro_5G_PCRM00_11_A.02_191215.ofp online and not sure if that would be the right one.
Thanks,
Joe
Click to expand...
Click to collapse
to enter fastboot mode you have to push volume button up and power, not volume down on this phone or you enter in adb shell on your PC the command "adb reboot fastboot"
BUT: I think, there are a lot of hints still not known by us users to unlock this oppo phone. We might like on Xiaomi phones need an oppo Account to unlock.
I myself didn't try to unlock yet. Does only make sense when a working TWRP is out
There was a note in the OPPO RENO forum about getting and running a file from OPPO, after 60 days.
For me the Chinese version is not good anymore, now I can't install any new app on this phone because it says that I have to log in to a heytap account. But if I want to log in, I have to give my Chinese phone number.. I don't have Chinese phone number of course. Any solutions to this problem?
Now the find x2 neo (cph2009eu) released as the global version, and I want to install it's software because it's 100% the same hardware if I know it well. But I can't. I have the firmware for it from the internet, but in a .ofp file, I can't flash it
Okay, now I found a method to install apps without signing in with a chinese number, so the global software is not urgent anymore, but it would be good anyway.
I tried to install the global software via qfil, but it gives sahara error. After a quick search I found that we have to unlock the phone's bootloader to flash the global rom.
But the chinese version that I have does not have fastboot mode, so maybe we have to wait until Oppo will unlock the phone's bootloader officially (probably we have to wait until the next Android/ColorOS beta)
I have bought this EU Version, but funny thing here: they disabled 5G. Mine has 765G, 12GB RAM, dual SIM but neither specified nor selectable 5G
Hi all,
I also own the Chinese version of this phone (PCRM00)
Looking to unlock the bootloader, install EU version of the ROM and also root..
Any help?
Thanks!
Hi,
the Oppo registration ist now available with a none-chinese mobile number. Seems they splittet the HeyTap and Oppo services so you can use an least the Oppo services.
Here is the software update of the global version
https://oppo-uk.custhelp.com/app/software_update_detail/p_name/Find+X2+Neo
It gives an error, so suddenly we cant install it simply from the original recovery
My variant is just the 128/8gb version, and maybe this also could be a problem, becouse the global phone has only 256/12 variant. So maybe with a 256/12 varint its woth a try
XDAnonymus said:
Here is the software update of the global version
https://oppo-uk.custhelp.com/app/software_update_detail/p_name/Find+X2+Neo
It gives an error, so suddenly we cant install it simply from the original recovery
My variant is just the 128/8gb version, and maybe this also could be a problem, becouse the global phone has only 256/12 variant. So maybe with a 256/12 varint its woth a try
Click to expand...
Click to collapse
I have 12/256 EU Version (seems to sell in Poland), dual-SIM, 4G only (although SD765G).
Current Firmware reads CHP2009_11_A.08, March security update.
Is this a valid update or will it possibly bring 5G?
Preacher_at said:
I have 12/256 EU Version (seems to sell in Poland), dual-SIM, 4G only (although SD765G).
Current Firmware reads CHP2009_11_A.08, March security update.
Is this a valid update or will it possibly bring 5G?
Click to expand...
Click to collapse
If you have the single-camerahole, 765G version, and the phone is CHP2009, this update maybe woth a try. The problem could be that Oppo dont allow to change the firmware in the official recovery, only update is possible, so if I try to install the global (CHP2009EU) on my PCRM00 (chinese) variant, it fails and dont install anything. And we dont have custom recoverys yet, and the chinese version dont even have fastboot mode to unlock the bootloader, so it seems impossible for me to install the global until Oppo dont unlock our phones bootloaders officially (for example for a beta upadate)
But if you already have CHP2009 software, maybe the update that I linked worth a try. If the recovery allows it..
If I know it well, the CHP2009EU (Oppo find X2 neo) have 5g modem, just like the chinese variant that I have (Theyre the same phone, but the software is different. I want the global software instead of the chinese becouse of Netflix HDR and Google assistant)
It is the single camera hole but 5G disabled- See Spec
I'd show you, but I cannot share screenshots here.
Would it reject update if it was not functional version or would I brick the device, if I flashed incorrect version?
The difference I see ist that X2 neo has single SIM and Reno3 pro has dual. I know from other brands, that this can brick the phone.
Preacher_at said:
It is the single camera hole but 5G disabled- See Spec
I'd show you, but I cannot share screenshots here.
Would it reject update if it was not functional version or would I brick the device, if I flashed incorrect version?
The difference I see ist that X2 neo has single SIM and Reno3 pro has dual. I know from other brands, that this can brick the phone.
Click to expand...
Click to collapse
There's always a theoretical chance to brick your device when you modify the software, it's your responsibility. But I think there's more chance that the original recovery that we have won't allow you to update your software to the X2 neo's software. If you want 5g, you can try the Chinese variant's software, but I think the recovery won't allow the other softwares to install
XDAnonymus said:
There's always a theoretical chance to brick your device when you modify the software, it's your responsibility.
Click to expand...
Click to collapse
I have it now for three weeks, no need for 5G, so better have a working than bricked phone currently.
Probably I'd play around in one year, when tools are more stable.
In fact I considered to search for an update on Polish Oppo site and found an update file for my Reno3 Pro, that was exactly the same as from your link and X2 neo.
So I did the update via Recovery, it ran through and landed with version .28.
It did not change anything on supported bands.
I remember from Sony phones, that bands are defined in NVRAM.
It seems that for all Reno3/X2 variants with 765G the firmware is the same, it is distinguished only by supported bands.
Preacher_at said:
In fact I considered to search for an update on Polish Oppo site and found an update file for my Reno3 Pro, that was exactly the same as from your link and X2 neo.
So I did the update via Recovery, it ran through and landed with version .28.
It did not change anything on supported bands.
I remember from Sony phones, that bands are defined in NVRAM.
It seems that for all Reno3/X2 variants with 765G the firmware is the same, it is distinguished only by supported bands.
Click to expand...
Click to collapse
Can you send the link from this update? So we can install this on PCRM00 via recovery?
XDAnonymus said:
Can you send the link from this update? So we can install this on PCRM00 via recovery?
Click to expand...
Click to collapse
I just updated from Polish site to latest version:
https://oppo-pl.custhelp.com/app/software_update_detail/p_name/Reno3+Pro
Now I am on June 5th security level.
The former file from UK site is exactly the same:
https://oppo-uk.custhelp.com/app/software_update_detail/p_name/Find+X2+Neo
Just tried the polish version on the chinese variant of the phone and it gave me an error.
Falsy157 said:
Just tried the polish version on the chinese variant of the phone and it gave me an error.
Click to expand...
Click to collapse
I also tried it, dont work :/
I don't know if it's really helpful but i think I've read somewhere on the official website that 5g isn't unlocked yet and would be thru future updates.
I live in the Netherlands and my Reno pro 5g should arrive today.
I'm kind of lost by all the different variants though..
The find x neo is also for sale over here and it seems the same service expert a minor different front cam.
But here in the Netherlands they are both for sale but the neo is much more expensive.
Anyway, I'm excited as this will be my first Oppo.
hello to all guys and good evening, I sincerely hope you can give me an answer to my question. I have a vivo x50 pro Chinese stock version where, however, the Italian language and Google services are already present, the only thing that bothers me are all those settings on the notifications that sometimes go sometimes no ... mystery. now i was wondering since the vivo x51 is practically a vivo x50 pro in global version could you put the global stock rom on my china version? risk something? thank you all
Scintilla85 said:
hello to all guys and good evening, I sincerely hope you can give me an answer to my question. I have a vivo x50 pro Chinese stock version where, however, the Italian language and Google services are already present, the only thing that bothers me are all those settings on the notifications that sometimes go sometimes no ... mystery. now i was wondering since the vivo x51 is practically a vivo x50 pro in global version could you put the global stock rom on my china version? risk something? thank you all
Click to expand...
Click to collapse
Hi,
Got the same problem.
I found at https://www.vivo.com/in/support/upgradePackageData?id=89
ROM for X50 pro,EX version,it means Euro ver.
But I didnt change the ROM yet. Still hesitating.
xtrzy said:
Hi,
Got the same problem.
I found at https://www.vivo.com/in/support/upgradePackageData?id=89
ROM for X50 pro,EX version,it means Euro ver.
But I didnt change the ROM yet. Still hesitating.
Click to expand...
Click to collapse
let us know how it goes if you go ahead and changed your rom . i am on the South African operator branded rom and i'd like to switch to a non branded rom ( get rid of the operator wallpaper and other stuff)
Any news about this subject ??
Hi friends, I have downgraded the firmware from the global version of ui 3.0 to the Indian version 2.0. Google Play services are not certified, the NFC does not work, I want to return the global firmware and I can't do anything. It is not possible to unlock the bootloader, please help!
Iunorthodox said:
Hi friends, I have downgraded the firmware from the global version of ui 3.0 to the Indian version 2.0. Google Play services are not certified, the NFC does not work, I want to return the global firmware and I can't do anything. It is not possible to unlock the bootloader, please help!
Click to expand...
Click to collapse
Hello, maybe you could help me with my situation, I have an RMX2086 with RUI 1.0 Android 10 build A.53 and I want to unlock the bootloader, but the deep test application comes out approved, but when the test started it restarts for 2 seconds on a black screen and letters in Chinese and it restarts in normal mode, I wanted to know if maybe you could share how to upload the software version to a higher than A.53 to try to unlock the bootloader
Same problem here downgraded to find out that all google services doesn't work damn :/ any help out there i see no comments !! pls
Hi everybody, i'm facing the same problem.
If anybody has found the solution to fix this issue some help will be greatly apreciated.
The only solution in my case is to install a new firmware via recovery mode but unfortunately there is no ozip file available, the only available AND I STRONGLY RECOMEND TO NOT INSTALL it .
The indian one is supposed to rollback from android 12 ui3.0 to android 11 ui2.0 but you'll get stuck in a dead end !! No more google protect no more updates apps or system....
No fastboot mode available, it appears just a second and the system is boot right after.
Ii've read elsewhere that Realme has disabled it!!!! incredible why ??
thanks