Some may have checked and tested dualboot firmware from SD card on Beelink devices with new Amlogic SoC. This type of dualboot is a good option if you don’t need SD card slot.
Ugoos showed their own dualboot firmware with Android and CoreElec packed together. A good option is the installation process is totally like standard firmware reflashing. For Ugoos AM6, X2 and X3 devices you can download standard Amlogic Burning Tool and special firmware.
After reflashing standard Android firmware with Launcher Three starts on my X2 device. The only difference noticed in it is power menu with “Restart to CoreELEC” button. If press it, device will restart andCoreELEC build will start loading.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ugoos Team choose nightly build for this project dated by 23rd of January.
Since that moment every start of the device will proceed with CoreELEC build. If need go back to android, there is a button “Reboot from eMMC/NAND”.
Both settings and accounts in Android and CoreELEC builds save on the device. So basically it is possible to use two active systems without additional complicated actions.
Here is the original article with links on Ugoos Website
Do they have a version for EmuELEC instead of CoreELEC?
I have purchased the HK1 Box (S905X3) similar to the Super Console X Retro game system, and I'd like test it out..
Related
Hi,
Sorry if I am opening this topic in a wrong place, but I have been doing some search about the Tvbox I bought.
http://www.aliexpress.com/snapshot/313383007.html?orderId=60793411617840
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
https://yadi.sk/i/QhU7FEQggGbTg
https://yadi.sk/i/9yMYFf5fgGbWK
Item specifics Item Type: TV Stick
Brand Name: LST
Connectors: USB
Operation System: Android
Hard Disk Capacity: < 100GB
Model Number: H6SB
Chip Programme: Allwinner A20,1.5GHz
Flash: 4G FLASH ROM
Android OS: Android 4.22
Color: Black,White
HDMI: HDMI1.4
Size: L:150*W:93*H:23
Video: 720P 1080P 2160P
Language: Chinese,English,Germany,Japanese,Korea etc.24 languages
Place of Origin: China (Mainland)
_____________________________________
After using some time i tried to install CWM recovery. but it didn't work. I think I used the wrong CWM recovery file. Now It doesn't start. I tried I few firmware posted on this site like Justop Dbox firmware (http://forum.xda-developers.com/showthread.php?t=2398632&page=2). I downloaded firmwares and prepared an SD card using Phoenixcard 3.0.9 . None of them seemed to work. I am stuck and dont know what to do.
I asked the vendor to send me the factory ROM. He did sens me a ROM but when I prepare the SD card and they to install it I gets into loop at a "gauge" screen. It fills, obviously loading something, then restarts again and again.
I am desparate, can someone help me.
Thanks in advance...
For a project I needed software & hardware to program a flash-IC. Doing some research I came across Flashrom, which also runs on Raspberry Pi. That saved me from buying some USB-programmer because you can simply use the GPIO-port. The inconvenience is that Flashrom only runs from the command line right now. Thus, you have to connect via SSH etc. Being a Kodi user I thought "just give it a try" and here we are:
This plugin installs the capability and a GUI to use Flashrom in Kodi. In the beginning development was started for Raspberry only, but it can probably also be used in general for Kodi installed in any Linux environment. This addon was tested...
...on Raspberry 1 rev. B with xbmc 16 (Jarvis) via GPIO port and with a WCH CH341A USB programmer
...in Linux Lite (Ubuntu) with a WCH CH341A USB programmer
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The code can be downloaded from Github: script.berryflash @ Github
And the Kodi addon is directly available here: script.berryflash.zip
Let me know if you find any errors, e.g. with other programmers when listed above.
Special thanks to the Flashrom team for their great work!
Changelog:
----------------
v1.0.0 (2016-04-27)
- Initial Release
He writes that the password does not match, even though the password is correct
Hi guys!
Thanks for having me.
I'm looking for an APP or method that will power on my Rooted S8 when power is applied to the charge port.
Can anyone help or suggest?
I am using my S8 as a data interface to the computer in my car and want the phone to AUTOMATICALLY turn on & off when the car does.
I have successfully rooted my S8 via TWRP and loaded Magisk, am running Noughat/9.0
Any suggestions or help very much appreciated.
**NOTE: S8 doesn't run a boot loader I believe so that hack wont work on my phone **
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Ideas?
Look inside here:
How to set your Android tablet to turn on when connected to wall power.
Our new Gen2.0 tablet kiosk plaftorm supports many different 10" tablets including most android tablets.
www.lilitab.com
Hi....Universal Android Root is another application accessible for Android gadgets that allows you to root your gadget without a PC. In contrast to Methods 1 and 2, the application isn't unreasonably well known and it probably won't work with some Android gadgets. That being said, if Methods 1 and 2 didn't work with your Android gadget, maybe this one will.
As the application is old, it should work with more seasoned Android gadgets and firmware forms. Like Framaroot, this application likewise includes an underlying alternative for unrooting your gadget. The application can establish upheld Android gadgets in five to seven seconds.
www.7pcb.com
This is a TWRP backup of MXQ PRO 4K 5G with Amlogic S905W
PCB Silkscreen print:
MXQ_W_EMCP_V1.2
20210715
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Downloads: Google Drive
Requirement:
- SD card with at least 2GB
- A tool that you poke in AV Port to press the reset button
Instruction
Prep--
- Format SD card to Fat32
- Extract all the files to SD card
Boot to TWRP
- Plug the microSD card into the MXQ Box
- While holding the reset button on the TV box (sometimes hidden inside the AV port) with a toothpick or unfolded paperclip, plug in the power cord
- Continue holding the reset button for 10-15 seconds
- TWRP recovery should load
Restoring Backup image
- Go to restore
- Click Select Storage and Choose SD card
- select the only one image backup in the option
- wait until it finishes restoring the image
- Go back to main menu and perform wipe
- reboot
Please take note that this image here is using a fake storage and ram spec, but the real spec is only 1Gig RAM and 8GB Storage.
Box seems "HS 9 PRO", not sold anywhere ... I was able to flash another firmware (In fact, 5-6 firmware "works" for those looking H6_4_32_20191114, X10puls, Tanix H6, Qplus H6) *BUT*
1) Wifi XR819 doesn't work (can live with that)
2) Remote doesn't work which is a pain for ON/OFF (mainly "ON" lol)
Supposed to be, Quad Core A53, Mali450 or Mali720 GPU... I used PhoenixProUSB to flash the images, as said, quite a few worked (I've been trying for 2 days zillions of IMG)
I would gladly put back the original firmware but I have no clue where to get it... Anybody know this box? Underneath, nothing relevant "STB model: HS_PVR_Pro_Dec_2020"
Here's the box (works with X10Plus firmware) and remote (that doesn't work). I can use a USB keyboard but can't turn ON the box.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Also, found out the remote is controlled by a chip "MT908" if I could do something with this, would still be happy (mainly for ON/OFF button lol) but I think it's just the chip and not related to the config of it :|. Anyway, any help is welcomed otherwise it's a bit useless my "4k pro" box
Looks like i'm out of luck :|
any idea on what the remote could be? I could at least use another firmware to enable the remote. Also, possible to install the wifi card in any way? I'm rooted but stock Android 9.0