is it possible to get into the engineering mode on my rooted xperia z2???
what's that!? don't you mean DEVELOPER OPTIONS? just tap a few times on settings>about phone>build number until it says you are a developer
kristianjbsirjusingh said:
is it possible to get into the engineering mode on my rooted xperia z2???
Click to expand...
Click to collapse
Engineering Mode is another name for developer options for MTK devices.
THIS WILL NOT WORK ON A SONY DEVICE
1. Go to you phone dialer and type any of these codes;
Engineer mode
Huge list of developer options for testing touch,gps,wifi,display,etc.
*#*#3646633#*#*
Hello @ all the team!
I have a Xperia Z Ultra (C6802) / Lollipop 5.1.1
It bootloop for 6 days now and does not give me access to Recovery Mode.
The bootloader also seems to be blocked.
I made a mistake:
> With Lucky Patcher I patched the "Google App" to have the Google Assistant
> I installed Xposed 3.1.1 and activated the Lucky Patcher module
Worse, I do not know why,
> I installed "Assistant Enabler" via Xposed
> After configuring it, I activated its module in Xposed and restarted the phone
AND THERE, VLAN !! Hard BOOTLOOP!
To try to correct the problem:
- I've immediately downloaded the latest firmware from my XZ Ultra (C6802) via Xperifirm (14.6.A.1.236), then
- I have flashed my firmware using Flashtool
Unfortunately, nothing does, it continues to bootloop.
Help me please, since last Friday that I galley from morning till late in the night!
Please!
In advance thank you @all those who will help me
Use fastboot mode to flash the custom recovery and then flash your desired custom rom
install flashtool,
vol down + plug in usb , you will enter fastboot ,
flash original sony rom ( pref 5.1.1 select form list )
and you can recover the phone again.
Hi,this is the beginners guide in rooting the Galaxy J5 Pro.
First I want you to know that J5 Pro is the same as J5 2017.
You will need some files:
Opt verity Encrypt - http://download.highonandroid.com/file/Tools/Root/Samsung/no-verity-opt-encrypt-6.0-star.zip
RMM State Bypass Mesa - http://download.highonandroid.com/file/Tools/Root/Samsung/RMM-State_Bypass_Mesa.zip
Magisk 19.1 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/magisk-release.zip
Magisk Manager 7.1.2 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/app-release.apk
(Optional)(For Pie) Helios Pie Kernel - https://androidfilehost.com/?fid=1395089523397966358
(Optional)(For Oreo) Helios Pro Kernel - https://androidfilehost.com/?fid=1395089523397913077
(Optional) Promotheus One UI (Pie ROM) -https://androidfilehost.com/?fid=1395089523397940329
(Optional) Promotheus Lite (Oreo ROM) -https://androidfilehost.com/?fid=1395089523397887684
TWRP 3.3.0-0 - https://github.com/ananjaser1211/an...3.3_J7Y17LTE/TWRP-3.3.0-j7y17lte-20190417.tar
Odin - https://odindownload.com/download/Odin3_v3.13.1.zip
Stock ROM (In case of Soft bricking you can save your device) - https://s3.wasabisys.com/updatofw/GALAXYJ5/SM-J530F/BTU/SM-J530F_1_20190405203714_44wceovclw_fac.zip
Samsung USB Drivers - https://developer.samsung.com/common/download/check.do?actId=698
Copy the No Verity OPT Encrypt file,RMM State Bypass,What kernel u need,The rom u need,Magisk and Magisk Manager APK to ur SD Card.
Enable Developer options(Go into About phone,Software information,Tap several times on Build number until it says you are a developer.
Then go to Settings > Developer options > Check Oem UNLOCK and USB Debugging.
If you broke your device go to last lines(down)
If you already downloaded the files lets begin!
1.Turn off your phone and boot into download mode (Hold Volume Down,Home and Power and them press Volume UP)
2.Install Samsung USB DRIVERS on PC
3.Connect your Phone to your PC by USB Cable.
4.Open odin and load the twrp tar in AP slot.
5.Go to options and uncheck Auto Reboot
6.Click start
7.When in ODIN it shows PASS,Hold Volume Up,Home and power until the screen turns black then immiediately release and Hold Volume UP,Home and Power until the TWRP Screen Appears.
8.Tap on Keep Read Only and then Wipe and Format Data.Type "yes" without ".
9.Tap on Reboot and then Recovery
10.Tap on install then on Select Storage And Micro SDCard.
11.Press on No verity Opt Encrypt and swipe.
12.Press back button and Install RMM State Bypass Mesa.
13.Press back button and Install Magisk.
14.Tap on Wipe Cache and Dalvik and Then Swipe
15.Press the middle button(Home) and Tap on Reboot and then System.
16.Wait for the phone to boot and configure it.
17.Enable Developer options again and enable OEM Unlock and USB Debugging.
18.Disconnect Your Phone from the PC.
If you just wanted Root, You are Done.
Install Helios Pro Kernel to Stock ROM -
1.Go into recovery
2.Install > Select Storage > Helios Pro Kernel file
3.Swipe
4.Wipe Cache and Dalvik and Reboot to System.
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
Install Custom Rom -
1.Boot Into TWRP (When powered OFF Hold Volume UP,Home and Power)
2.Go to Wipe and Select System,Data,Cache,Internal Storage and swipe.
3.Then click on Wipe and Format Data. (Recommended)
4.Go to Install and select what ROM you want to Install:
-Promotheus One UI (Pie ROM)
-Promotheus Lite (OREO ROM)
Click on First "Click to show content" for Promotheus One UI
Click on Second "Click to show content" Promotheus Lite
1.In Aroma Installer Click next and agree to the terms and conditions
2.Then click Full Wipe.
3.Select What Mods you want
4.Select what BloatWare you want.
5.Click Install.
6.After its done Reboot.
7.After ~15 seconds of the Samsung Logo Hold Volume Down,Home and Power then release when the screen turns black.
8.After it boots it will be laggy.Complete the setup and connect to Google and Samsung Account and update everything first ftom Galaxy Store then from Play store.Then reboot and it will not be laggy.
9.You will see that you dont have root, to fix this Reboot into Recovery (You know the procedure) and go to Install > Select Storage > MicroSD Card > HeliosPie Kernel 3.1 and swipe.
10.Wipe Cache and Dalvik and reboot.
11.After it boots you will have Root and a Pie Custom Rom!
12.If you do not pass Safety Net,Go to Magisk > Modules > And disable BusyBox for Android NDK.
You are Done! Now install your favorite apps!
1.Boot into Recovery
2.Install > Promotheus Lite A8+
3.In Arome click Next and Agree to the Terms and Conditions.
4.Select your Mods
5.Select your BloatWare
6.Tap on Install and Reboot to System.
7.After ~15 seconds of The Samsung LOGO and then Hold Volume Down,Home and Power and Release when the screen turns black.
8.After the phone boots it will be very laggy.Complete the setup and connect to Google and Samsung Account and update everything From Galaxy Store and Play Store.
9.You will see you dont have root.Boot into Recovery and Tap on Install > Select Storage > Micro SDCard > Helios Pro Kernel.
10.Reboot to System.
11.You are done
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
If you Soft Brickes your device, open odin. Hold Volume Down,Home and Power until you are in download mode.
In odin select BL in BL box
AP in AP box
CP in CP box
CSC in CSC box (Important select CSC not Home_CSC)
Click Start and wait.
Your device will boot.
Finish the setup and enable developer option blah blah blah (Try Again)
If you dont see Oem unlock,You need to wait 7 days.
So thats it! If you have any problem reply!
victorAndrie said:
Hi,this is the beginners guide in rooting the Galaxy J5 Pro.
First I want you to know that J5 Pro is the same as J5 2017.
Click to expand...
Click to collapse
Samsung website on the j5 pro. Notice the model number
https://www.samsung.com/au/smartphones/galaxy-j5-pro-j530y/SM-J530YZKEXSA/
Gsm arena page on j5 (2017). Notice the model number.
https://www.google.com/amp/s/m.gsmarena.com/samsung_galaxy_j5_(2017)-ampp-8705.php
That info was readily available to anyone for about 2 yrs Also, you guys on the j5 2017 already have guides to do what you created a thread to do?
https://forum.xda-developers.com/galaxy-j5/how-to/samsung-j5-2017-sm-j530f-root-oreo-8-1-t3911794
palmbeach05 said:
Samsung website on the j5 pro. Notice the model number
https://www.samsung.com/au/smartphones/galaxy-j5-pro-j530y/SM-J530YZKEXSA/
Gsm arena page on j5 (2017). Notice the model number.
https://www.google.com/amp/s/m.gsmarena.com/samsung_galaxy_j5_(2017)-ampp-8705.php
That info was readily available to anyone for about 2 yrs Also, you guys on the j5 2017 already have guides to do what you created a thread to do?
https://forum.xda-developers.com/galaxy-j5/how-to/samsung-j5-2017-sm-j530f-root-oreo-8-1-t3911794
Click to expand...
Click to collapse
That is only root.
victorAndrie said:
That is only root.
Click to expand...
Click to collapse
Straight from post #1 of that thread. Notice the starred parts below.
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
***************************************************
*************TWRP
*******************************
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
**************************************************
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
***************************************************
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
***************************************************
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
palmbeach05 said:
Straight from post #1 of that thread. Notice the starred parts below.
After updating my J5 2017 J530F to the latest Oreo 8.1 I was having trouble getting root and all things working again.
Hours of waiting for installs then something going wrong after applying the CF-Auto-root or trying to install Magisk or something and having to install again, Hours spent waiting..
Trying to install the auto-root would cause a verification error and force a system erase but not work again.
Thought i'd found the solution with the EDOs rom but then realised I had no bluetooth and had problems with mobile data.
After many efforts i found a way by simply installing the excellent Helios PRO kernel and manually installing Magisk after.
So I offer you the way i found to root my phone with Stock Oreo 8.1
A step by step breakdown of the method I used to fully root the fresh stock rom install.
First download the needed stuff
Latest Samsung Odin software. (3.13)
https://samsungodin.com/download
Download Link:
https://samsungodin.com/download/Odin3_v3.13.1.zip
USB Drivers.
https://samsungodin.com/SamsungUSBDriver/USB_Drivers_1.5.27.0.rar
New Oreo 8.1 Stock ROM
https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/
Download Link: https://www.sammobile.com/firmwares/galaxy-j5/SM-J530F/BTU/download/J530FXXU3BRL1/252803
***************************************************
*************TWRP
*******************************
https://github.com/TwrpBuilder/andr...s/tag/TWRP-3.2.3-TwrpBuilder-2018-09-13_15-34
Download Link: https://github.com/TwrpBuilder/andr...2.3-TwrpBuilder-j5y17lte-2018-09-13_15-34.tar
**************************************************
The Helios Pro Kernel
https://forum.xda-developers.com/ga...velopment/kernel-refined-kernel-v1-0-t3675500
Note if you are not installing from fresh stock roms Helios kernel says...
If you have flashed Root through any means other than magisk, Please uninstall it (SuperSU>Full unroot)
Magisk , (All J5 roms kernels i installed that said they had magisk pre-installed never actually worked on my phone)
so I downloaded the files to manually install Magisk.
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
I used the main zip file and the manager apk
https://github.com/topjohnwu/Magisk/releases/download/v18.1/Magisk-v18.1.zip
https://github.com/topjohnwu/Magisk/releases/download/manager-v7.0.0/MagiskManager-v7.0.0.apk
Note: developer mode and OEM unlocking need to be enabled for most of these steps but many of the steps undo the settings so will need to be reapllied at various stages.
enable developer mode on phone by going to Settings/About phone/Software settings and keep pressing "Build Number" till developer mode activates then go back to main settings page and select "Developer Options" and make sure developer mode is enabled and USB debugging (i guess) and "OEM Unlock"
Method...
1. unpack Odin software and right click Launcher icon and select properties
Go to Compatibility settings and select Vista (service pack 2) compatibility.
Click okay and launch the Odin program.
2. Install stock ROM
Unpack the Oreo 8.1 files and use the buttons in Odin to load the BL , AP, CP and CSC files into each slot
Put phone into "Download Mode" by powering off and holding volume down - , home, and power buttons together till the screen pops up telling you to now press volume up to go to download mode.
Then plug in USB to computer.
Odin should report "Added" if you have correct samsung drivers on PC.
Then press "Start" in Odin.
Stock roms should all download to phone then it reboots.
***************************************************
3. Flash TWRP
Boot up phone, log into an account and get it all running then enable developer mode again.
Once set copy the Helios pro kernel zip file and the magisk zip and apk files to the phones SD card.
Now power down the phone and put it in download mode again.
Load Odin again and now put only the TWRP installer .tar file into the "AP" slot then select the "Options" tab in Odin and uncheck the auto reboot option. then hit start and flash twrp.
***************************************************
Load TWRP an install helios kernel
After flashing TWRP hold down the phones volume-down, home and power buttons and as soon as the screen goes blank immediately change volume down for volume up while still holding home and power.
then TWRP should load
Go to Wipe and select "Format Data" type yes to proceed , then back to wipe, select advanced wipe and wipe internal storage.
then back to TWRP main page and select "Install", select micro-sd card and point installer to the Helios Kernel zip file and install.
Install Magisk Manager app:
After booting up i still had no root so i installed the Magisk Manager apk using the "My files" app and launching it confirmed still no Magisk installed.
(I cannot recall if i had to go through the "Enable developer mode" again at this point but check if you need to or not)
Last Step, Manually Install Magisk.
Lastly I powered down the phone and held volume up, home and power key to launch TWRP
There i selected Install and installed the Magisk.zip file from SD card.
Finally the system booted, everything was working and i had root via an installed and working Magisk
Hope this helps someone..
Click to expand...
Click to collapse
Hi,I see you forgot to install no verity encrypt,rmm state bypass. I would not recommend this method in any way to beginners(coming from an intermediarre or how that word is i am not native english) because you will then have RMM prenormal and you cant remove encryption ( most magisk modules dont work)
j5
hello, please i need any md5 rom for j5 because i have a problem on my system everything has stopped and my power button not working i cant delete wipe and cache and when i download twrp from odin to my phone its fail and its blocked by frp please im really need help
Does not remove the DM-verity problem
ExtremeGrief said:
Hi,this is the beginners guide in rooting the Galaxy J5 Pro.
First I want you to know that J5 Pro is the same as J5 2017.
You will need some files:
Opt verity Encrypt - http://download.highonandroid.com/file/Tools/Root/Samsung/no-verity-opt-encrypt-6.0-star.zip
RMM State Bypass Mesa - http://download.highonandroid.com/file/Tools/Root/Samsung/RMM-State_Bypass_Mesa.zip
Magisk 19.1 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/magisk-release.zip
Magisk Manager 7.1.2 - https://github.com/topjohnwu/magisk_files/raw/master/canary_builds/app-release.apk
(Optional)(For Pie) Helios Pie Kernel - https://androidfilehost.com/?fid=1395089523397966358
(Optional)(For Oreo) Helios Pro Kernel - https://androidfilehost.com/?fid=1395089523397913077
(Optional) Promotheus One UI (Pie ROM) -https://androidfilehost.com/?fid=1395089523397940329
(Optional) Promotheus Lite (Oreo ROM) -https://androidfilehost.com/?fid=1395089523397887684
TWRP 3.3.0-0 - https://github.com/ananjaser1211/an...3.3_J7Y17LTE/TWRP-3.3.0-j7y17lte-20190417.tar
Odin - https://odindownload.com/download/Odin3_v3.13.1.zip
Stock ROM (In case of Soft bricking you can save your device) - https://s3.wasabisys.com/updatofw/GALAXYJ5/SM-J530F/BTU/SM-J530F_1_20190405203714_44wceovclw_fac.zip
Samsung USB Drivers - https://developer.samsung.com/common/download/check.do?actId=698
Copy the No Verity OPT Encrypt file,RMM State Bypass,What kernel u need,The rom u need,Magisk and Magisk Manager APK to ur SD Card.
Enable Developer options(Go into About phone,Software information,Tap several times on Build number until it says you are a developer.
Then go to Settings > Developer options > Check Oem UNLOCK and USB Debugging.
If you broke your device go to last lines(down)
If you already downloaded the files lets begin!
1.Turn off your phone and boot into download mode (Hold Volume Down,Home and Power and them press Volume UP)
2.Install Samsung USB DRIVERS on PC
3.Connect your Phone to your PC by USB Cable.
4.Open odin and load the twrp tar in AP slot.
5.Go to options and uncheck Auto Reboot
6.Click start
7.When in ODIN it shows PASS,Hold Volume Up,Home and power until the screen turns black then immiediately release and Hold Volume UP,Home and Power until the TWRP Screen Appears.
8.Tap on Keep Read Only and then Wipe and Format Data.Type "yes" without ".
9.Tap on Reboot and then Recovery
10.Tap on install then on Select Storage And Micro SDCard.
11.Press on No verity Opt Encrypt and swipe.
12.Press back button and Install RMM State Bypass Mesa.
13.Press back button and Install Magisk.
14.Tap on Wipe Cache and Dalvik and Then Swipe
15.Press the middle button(Home) and Tap on Reboot and then System.
16.Wait for the phone to boot and configure it.
17.Enable Developer options again and enable OEM Unlock and USB Debugging.
18.Disconnect Your Phone from the PC.
If you just wanted Root, You are Done.
Install Helios Pro Kernel to Stock ROM -
1.Go into recovery
2.Install > Select Storage > Helios Pro Kernel file
3.Swipe
4.Wipe Cache and Dalvik and Reboot to System.
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
Install Custom Rom -
1.Boot Into TWRP (When powered OFF Hold Volume UP,Home and Power)
2.Go to Wipe and Select System,Data,Cache,Internal Storage and swipe.
3.Then click on Wipe and Format Data. (Recommended)
4.Go to Install and select what ROM you want to Install:
-Promotheus One UI (Pie ROM)
-Promotheus Lite (OREO ROM)
Click on First "Click to show content" for Promotheus One UI
Click on Second "Click to show content" Promotheus Lite
1.In Aroma Installer Click next and agree to the terms and conditions
2.Then click Full Wipe.
3.Select What Mods you want
4.Select what BloatWare you want.
5.Click Install.
6.After its done Reboot.
7.After ~15 seconds of the Samsung Logo Hold Volume Down,Home and Power then release when the screen turns black.
8.After it boots it will be laggy.Complete the setup and connect to Google and Samsung Account and update everything first ftom Galaxy Store then from Play store.Then reboot and it will not be laggy.
9.You will see that you dont have root, to fix this Reboot into Recovery (You know the procedure) and go to Install > Select Storage > MicroSD Card > HeliosPie Kernel 3.1 and swipe.
10.Wipe Cache and Dalvik and reboot.
11.After it boots you will have Root and a Pie Custom Rom!
12.If you do not pass Safety Net,Go to Magisk > Modules > And disable BusyBox for Android NDK.
You are Done! Now install your favorite apps!
1.Boot into Recovery
2.Install > Promotheus Lite A8+
3.In Arome click Next and Agree to the Terms and Conditions.
4.Select your Mods
5.Select your BloatWare
6.Tap on Install and Reboot to System.
7.After ~15 seconds of The Samsung LOGO and then Hold Volume Down,Home and Power and Release when the screen turns black.
8.After the phone boots it will be very laggy.Complete the setup and connect to Google and Samsung Account and update everything From Galaxy Store and Play Store.
9.You will see you dont have root.Boot into Recovery and Tap on Install > Select Storage > Micro SDCard > Helios Pro Kernel.
10.Reboot to System.
11.You are done
If you dont pass SafetyNet :Go to Magisk > Modules > And disable BusyBox for Android NDK.
If you Soft Brickes your device, open odin. Hold Volume Down,Home and Power until you are in download mode.
In odin select BL in BL box
AP in AP box
CP in CP box
CSC in CSC box (Important select CSC not Home_CSC)
Click Start and wait.
Your device will boot.
Finish the setup and enable developer option blah blah blah (Try Again)
If you dont see Oem unlock,You need to wait 7 days.
So thats it! If you have any problem reply!
Click to expand...
Click to collapse
The TWRP recovery does not stay there.
When flashing the "No verity Opt Encrypt", it fails with an error message in red. Only genuine binaries can be flashed.
Is there a simple answer to this ?
I've re-installed my stock ROM for now, no Root or TWRP.
Thank you.
Nice custom roms
Hello, i followed the tutorial :
installed ADB
activated developer mode in android
I cannot toggle ADB debugging, it says that my chrome os needs to be in developer mode
I'm using chrome os 90 on a Lenovo duet
Did they disable the feature in chrome os 90 and I need to go full dev mode, which I wanted to avoid for security reasons.
I am trying to install a custom ROM on my sons MI PAD 4.
I originally bought the tablets on aliexpress.
The current MIUI version is 9.6
The tablets are unlocked, showing unlocked on the boot screen screen with an open lock image.
After enabling developer options, the developer options menu shows, but it is empty.
Previously I never bothered with a MI account. I registered a MI account but that should not even be required as the tablets are supposedly already unlocked.
How do I enable USB debugging or get the developer options menu to be populated?
you don't need usb-debugging for fastboot