Please help me, battery became so bad and i want to install another rom - Realme 3 Pro Questions & Answers

Since i have updates to android 10, i have been facing battery issue, the battery became so bad and it doesnt stay too long as before, i trying resetting the device, wipping, even getting back to android 9, but it keep getting notifications to update to 10 and i cancel, until i waked up a day and i found it has been updated even i disabled it, so i need to install a custom rom like android 9 with updates disabled, or any other custom good rom

Do you have the latest version, ending with C.03 ?

Related

Tablet Z restarting no matter what stock ROM has

So I had this SGP321 for over a year now.Bought it brand new from this guy on the internet for a suspicious low price.Not a real shop or anything so no waranty. It worked very well for a few months then I noticed it started rebooting every now and then.After a OS update that was rolling out at that time (can't remember the version) the reboots were more often.After the KitKat update arrived and I downloaded it,after the process was over and the phone had to reboot,it entered a reboot loop that could not be stoppped (apart from forced shut down,but with same thing when trying to turn back on). I repaired the OS with the PC tool,no changes.I flashed older versions of stock OS with flashtool,reboots every couple of minutes. Then I installed Cyanogenmod 11.That worked very well,no reboots,but had many bugs and battery draining fast in stand by (about 1% per hour no matter what I deactivated,or with various apps to induce deep sleep). The new CM12.1 does not work,keeps rebooting.
Now,yesterday I tried again and again to get the tablet to work with a stock ROM. I only intend to use it for reading comic books,so all I want is a stable ROM with good battery life.So I would like to have a stock one. But why does a custom one run fine on it and a stock one keeps rebooting? I tried Sony forum but they were at a complete loss and sent me here for help.Any ideas?
rammstein_08 said:
So I had this SGP321 for over a year now.Bought it brand new from this guy on the internet for a suspicious low price.Not a real shop or anything so no waranty. It worked very well for a few months then I noticed it started rebooting every now and then.After a OS update that was rolling out at that time (can't remember the version) the reboots were more often.After the KitKat update arrived and I downloaded it,after the process was over and the phone had to reboot,it entered a reboot loop that could not be stoppped (apart from forced shut down,but with same thing when trying to turn back on). I repaired the OS with the PC tool,no changes.I flashed older versions of stock OS with flashtool,reboots every couple of minutes. Then I installed Cyanogenmod 11.That worked very well,no reboots,but had many bugs and battery draining fast in stand by (about 1% per hour no matter what I deactivated,or with various apps to induce deep sleep). The new CM12.1 does not work,keeps rebooting.
Now,yesterday I tried again and again to get the tablet to work with a stock ROM. I only intend to use it for reading comic books,so all I want is a stable ROM with good battery life.So I would like to have a stock one. But why does a custom one run fine on it and a stock one keeps rebooting? I tried Sony forum but they were at a complete loss and sent me here for help.Any ideas?
Click to expand...
Click to collapse
Seems that it has hardware problem like corrupting internal Flash memory or smth else, that is very difficult or imposible to fix by reflashing.

Flash Android 5.1.1 LMY48M Lollipop Factory Image for Google Nexus 10

Google has issued a brand new Android 5.1.1 Factory Image file that should patch the StageFright Security bug forever. If you want to install a clean Lollipop OS on your tablet, then you should check all the info listed in this post.
The StageFright Security bug should’ve been fixed with the previous LMY48I Android 5.1.1 release, but that didn’t happen as tons of Nexus 10 users have reported that the security vulnerability was still there. If you want to be sure that this bug is fixed, then you should flash the latest LMY48M firmware version of Android 5.1.1 Lollipop OS on your tablet.
Installing a factory image on your will always remove all the data from your tablet and you should create backups before starting the flashing process. Read the following guidelines first:
use this post only with the Google Nexus 10 tablets.
– don’t try to update any other different tablets with the files that you will find in this post.
by installing this Android 5.1.1 LMY48M factory image you should know that the flashing process will remove all data from it.
– however, if your tablet is running a stock Android 5.1.1 LMY48I build that hasn’t been modified in any way, then you can use a small workaround in order to avoid the ‘factory reset’.
– more info on the update workaround can be found when you reach the tutorial instructions.
backup all the important files before starting the installation process.
enable USB Debugging for your tablet from its Developer Options menu.
– if you can’t find Developer Options under Settings menu, then you should enable it first: go to Settings> About Phone and tap 7 times on the Build Number section.
– return to Settings, scroll down, open Developer Options and find the USB Debugging option in order to enable it.
use this post only if you are an advanced user.
we cannot be blamed in case you end up losing any data in the process nor in case you brick your device.
check your Nexus 10 battery charge level and make sure that it is over 40%, it will prevent your device from powering down during installation.
read the whole tutorial and make sure that you won’t be skipping any steps, so that you will be able to complete the factory image installation at your first attempt.
I've used three different browsers to read this page in case I have some sort of content blocker active, and I see no tutorial in any of them...?
It's always nice to see people trying to help, and notifications of new ROMs are always welcome (though I installed LMY48M weeks ago), but there are already hundreds of tutorials showing how to upgrade a ROM - maybe you decided not to go ahead with the rest of your post?
With latest update 5.1.1 LMY48T my tablet powering OFF randomly. I had naver this issue before on 5.0.2 (( This update is piece of crap in my opinion
Amiga4ever123 said:
With latest update 5.1.1 LMY48T my tablet powering OFF randomly. I had naver this issue before on 5.0.2 (( This update is piece of crap in my opinion
Click to expand...
Click to collapse
I've had the same problem, plus now I have battery issues. The tablet won't fully charge and will randomly turn off after some unknown time of use.
This update has killed my battery.
Beware of this update!!!!!!!!!!!!!!!!!!!!!!!!!!!! IT TOTALLY SCREWS YOUR NEXUS 10!!!!!!!!!!!!!! I´m reverting back to LMY47V because the newer updates are bricking my Nexus 10! I have flashed and reinstalled it 10 times by now, it just can´t handle this update! I think they did it for you to buy a new Nexus device by killing the Nexus 10!
maw said:
Beware of this update!!!!!!!!!!!!!!!!!!!!!!!!!!!! IT TOTALLY SCREWS YOUR NEXUS 10!!!!!!!!!!!!!! I´m reverting back to LMY47V because the newer updates are bricking my Nexus 10! I have flashed and reinstalled it 10 times by now, it just can´t handle this update! I think they did it for you to buy a new Nexus device by killing the Nexus 10!
Click to expand...
Click to collapse
Are you referring to build lmy48m or lmy48t?
I can't get to flash anything. Even after flashing another version, the old version just stays. I've tried everything. Formatting, erasing, downgrading, nothing works. I think my Nexus 10 is officially dead. It will boot up and like 1 minute after it just crashes and reboots again. I have read that others have this problem, could be that the motherboard is shot. Since there are no motherboards available, I can't even repair it. It lasted exactly 2 years, what a waste!
Well I just spent hours going through all the ota update from original jelly bean that it came with up to the latest lollipop build lmy48t and everything is working fine thus far.

Pleaae help me, battery became so bad and i want to install another rom

Since i have updates to android 10, i have been facing battery issue, the battery became so bad and it doesnt stay too long as before, i trying resetting the device, wipping, even getting back to android 9, but it keep getting notifications to update to 10 and i cancel, until i waked up a day and i found it has been updated even i disabled it, so i need to install a custom rom like android 9 without forcing me to upgrade to 10

Problems after updating android 11

Recently I updated my Realme 7 pro to android 11(through official ota). After update my phone booted and it couldn't go beyond lock screen. Lock screen blinks for a millisecond and and again this process is repeating, no key is working.
Even after reboot and deleting app data through recovery seems to be helpful.
Then I formatted my my phone, all my data lost, but finally phone started. I have to reinstall all apps and all the stuff,
Then I debloated my phone using adb,
After that I restarted my phone again same problem arrives, again I had to format my phone and again reinstall all the stuff.
If anybody found the solution please share this.
My observation with android 11
1. Seems like battery life is poor as compared to android 10.
2. Mx player keeps crashing again & again after starting.
3. No visible improvement in camera quality.
4. Still unwanted bloatware from realme and can't do anything with that.
5. App opening speed and scrolling is smooth as compared to android 10.
As now I don't find any useful thing in android 11,
So it is advised that please wait for more stable update.
That sounds not good! I am still waiting for the update. But now I am not sure if it is a good idea .....
Do you have the Global or EU version? Where do you live? I'm from Europe either the Global Version. I try to get the OTA update with a Indian VPN server.
Anyone Noticed that after 2nd android 10 update realme just degraded the widevine L1 to L3
Now I am not able to watch in hd in any app
Please help if anyone finds solution about this
And i am from india , I've updated to C.20 android 11 realme 2.0 ive done full factory reset and all sorts things like it
ramansehra said:
Recently I updated my Realme 7 pro to android 11(through official ota). After update my phone booted and it couldn't go beyond lock screen. Lock screen blinks for a millisecond and and again this process is repeating, no key is working.
Even after reboot and deleting app data through recovery seems to be helpful.
Then I formatted my my phone, all my data lost, but finally phone started. I have to reinstall all apps and all the stuff,
Then I debloated my phone using adb,
After that I restarted my phone again same problem arrives, again I had to format my phone and again reinstall all the stuff.
If anybody found the solution please share this.
My observation with android 11
1. Seems like battery life is poor as compared to android 10.
2. Mx player keeps crashing again & again after starting.
3. No visible improvement in camera quality.
4. Still unwanted bloatware from realme and can't do anything with that.
5. App opening speed and scrolling is smooth as compared to android 10.
As now I don't find any useful thing in android 11,
So it is advised that please wait for more stable update.
Click to expand...
Click to collapse
Same thing happened to me! I had to reset and lost valuable data
Now I can't debloat, because the same thing happens - lock screen keeps blinking, no way to do anything.
If someone has a safe to uninstall list on Android 11, please share
I have updated my Realme 7 Pro (Europe) just a few days ago. Reading all this complains made me sceptical installing the new update but believe me guys that i am glad and very happy with this new android 11 update. No issues on booting, no heating problems, very smooth UI, great battery life ( 8-10 hours of SOT, with 20-25 % screen light). I read on telegram that booting issues appear on Realme 7 Pro when users debloat the initial apps via ADB (weather app) and then make the android 11 update.
ramansehra said:
Recently I updated my Realme 7 pro to android 11(through official ota). After update my phone booted and it couldn't go beyond lock screen. Lock screen blinks for a millisecond and and again this process is repeating, no key is working.
Even after reboot and deleting app data through recovery seems to be helpful.
Then I formatted my my phone, all my data lost, but finally phone started. I have to reinstall all apps and all the stuff,
Then I debloated my phone using adb,
After that I restarted my phone again same problem arrives, again I had to format my phone and again reinstall all the stuff.
If anybody found the solution please share this.
My observation with android 11
1. Seems like battery life is poor as compared to android 10.
2. Mx player keeps crashing again & again after starting.
3. No visible improvement in camera quality.
4. Still unwanted bloatware from realme and can't do anything with that.
5. App opening speed and scrolling is smooth as compared to android 10.
As now I don't find any useful thing in android 11,
So it is advised that please wait for more stable update.
Click to expand...
Click to collapse
did u reset phone after update?

Rolled Back from UI 3.0 to UI 2.0 and now I can't upgrade again.

Hi, i found that my realme 7 has an update to Android 12 with realme UI 3.0 but it wasn't available (updater gave nothing) so I used a VPN to check if there was an update and it found it, disconnected the vpn and the update was still available. Updated and i noticed the battery wasn't charging like before updating. I started to worry (more at the end of the post) a lot so i decided to roll back to UI 2.0. Readed that it requires some charging cycles before things normalize so I decided to upgrade to UI 3.0 again, but now there is no update not even with VPN, also there are some weird apps i didn't saw before (like realme community and realme store), i rolled back using a file from the site "c.realme.com"
I wanna be able to update to 3.0 again, should i flash the phone? What can i do, please help, i just wanna return to before rolling back to UI 2.0
Note: the reason i acted so stupidly it's because i have OCD and the fear of the battery won. Now im feeling like ****, idk what to do, it's my first phone that i can play games with, have 2 apps open simultaneously, my previous one had 1 gb ram.
Note 2: im pretty sure in that info that ends with _C.17 was .19 but the rolling back file turned to 17. Also i tried the realme manual upgrader and found no updates.
EDIT: New info, the rollback file was for India only, the file has 2151 firmware, my phone is 2155. What can i do, i need to flash?

Categories

Resources