[ROM][11.0][UNOFFICIAL] Evolution X 5.7 [begonia][15/05/2021] - Redmi Note 8 Pro ROMs, Kernels, Recoveries, & Othe

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Evolution X 5.7 for the Xiaomi Redmi Note 8 Pro [begonial]
Code:
/*
* Your warranty is void. Or vaild, probably?
*
* I am not responsible for bricked devices, dead SD cards, Ebolation X,
* thermonuclear war, or the current economic crisis caused by you following
* these directions. YOU are choosing to make these modificiations, and if
* you point your finger at me for messing up your device, I will LMAO at you.
*/
Living, Breaking, Keep Evolving.
Pixel UI, customization and more, we are Evolution X!
- Team Evolution X -
@joeyhuab
@peaktogoo (Now RealAkito)
Reach us on Twitter! @EvolutionXROM​
What are our features?
- Just flash and check "The Evolver"
You tell me
DO NOT FLASH GAPPS, ALREADY INCLUDED
First Time Install / Clean Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Wipe Data/Cache/System
5. Flash the ROM
6. Format data
7. Reboot to System and #KeepEvolving
Update / Dirty Flash
1. Reboot to Recovery
2. Download the proper ZIP for your device
3. Flash the ROM
4. Reboot to System and #KeepEvolving
Light Screenshots / Dark Screenshots / Download / Official Chat / Device Support
Android OS version: 11.0_r37
Security patch level: May 2021
Build author: @TheMalachite
Source code: https://github.com/Evolution-X
Kernel Source code: Prebuilt MIUI kernel from MIUI V12.0.7.0.QGGMIXM
ROM Developer: joeyhuab
​

Ohhh let me be the first in says thanks...

A clean flash will be required if you come from previous Evolution X build by Mashopy !!!
Source changelog:
- Upstream to latest Evolution X source
Device changelog:
- Rebased to LineageOS tree
- Media playback fixed
- Switch to Sandcastle kernel and upstream kernel to 4.14.151
- Enable updatable APEX
- Enable F2FS
- Enable exFAT (thanks to @arter97 for this)
- Enable WireGuard (also thanks to @arter97 for this)
- Enable unwanted file blocker (Make un-executable "optimizer" who are available in Magisk like FDE.AI, LSpeed and any kind of "optimizer" and thanks to @yarost12 for this)

Really glad someone picked up Evo X after mashopy left development. Looking forward for great things.

Incoming calls still wont work?

sw8butdeadly09 said:
Incoming calls still wont work?
Click to expand...
Click to collapse
See known issues

antony.ps said:
See known issues
Click to expand...
Click to collapse
i see , but there's a new update that the reason why I'm asking again.

Oh nice - enabled wireguard!
Gapps already incl is horrible

Testing now, awesome job!
Wifi and Playstore works flawlessly
Gestures flow way more easily than in MIUI
Some animations in setup were stuttering
Looks like a daily driver for me =) Thanks!
Edit --
After some test, had some trouble downloading CoD Mobile from Playstore (too slow) and videos in general enter a loop (facebook and the animations I previously mentioned). Could not restore Migrate backup too, and Whatsapp could not restore backup =S

antony.ps said:
Testing now, awesome job!
Wifi and Playstore works flawlessly
Gestures flow way more easily than in MIUI
Some animations in setup were stuttering
Looks like a daily driver for me =) Thanks!
Edit --
After some test, had some trouble downloading CoD Mobile from Playstore (too slow) and videos in general enter a loop (facebook and the animations I previously mentioned). Could not restore Migrate backup too, and Whatsapp could not restore backup =S
Click to expand...
Click to collapse
Did you use migrate 3.0 A3. 1 for the backup?

Helhound0 said:
Did you use migrate 3.0 A3. 1 for the backup?
Click to expand...
Click to collapse
Yes, but it was my first time using it. Installed ROM, reboot, Magisk, reboot, backup.zip, reboot, but it couldn't find metadata.
Since I wiped /data /cache and /system to install ROM, i had to backup on my machine via adb /sdcard/Migrate and restored it after flash, maybe the problem was with that too.

antony.ps said:
Yes, but it was my first time using it. Installed ROM, reboot, Magisk, reboot, backup.zip, reboot, but it couldn't find metadata.
Since I wiped /data /cache and /system to install ROM, i had to backup on my machine via adb /sdcard/Migrate and restored it after flash, maybe the problem was with that too.
Click to expand...
Click to collapse
Check any file explorer app and see if you see you internal storage. If you don't, this rom is having the same problem as CesiumOS. You won't be able to use the internal storage with this rom if that's the case.
If you see the internal storage, you have to follow the below steps.
1. Boot up the ROM without flashing backup zips.
2. Install solid explorer (or any similar root explorer)
3. Make the folder migrate_cache under /data/local/tmp/. The full path should be /data/local/tmp/migrate_cache
4. Directly extract all the backup contents from inside the zip under that directory. In solid explorer, open the zip, select everything, tap the copy icon at bottom left. Now go to the above path and paste everything.
5. Install the latest helper 3.0 (use #download_helper.3.0). Disable Google Play protect temporarily if needed. Install the helper.
6. Open the helper app. All applications should be detected. Restore them.
In case of permission related errors, in the "Preferences" of helper, check the option: "Remount data"
Join the migrate telegram group while you're at it. The newest alpha doesn't have this issue as i heard and it's only available though telegram right now.

Helhound0 said:
Check any file explorer app and see if you see you internal storage. If you don't, this rom is having the same problem as CesiumOS. You won't be able to use the internal storage with this rom if that's the case.
If you see the internal storage, you have to follow the below steps.
1. Boot up the ROM without flashing backup zips.
2. Install solid explorer (or any similar root explorer)
3. Make the folder migrate_cache under /data/local/tmp/. The full path should be /data/local/tmp/migrate_cache
4. Directly extract all the backup contents from inside the zip under that directory. In solid explorer, open the zip, select everything, tap the copy icon at bottom left. Now go to the above path and paste everything.
5. Install the latest helper 3.0 (use #download_helper.3.0). Disable Google Play protect temporarily if needed. Install the helper.
6. Open the helper app. All applications should be detected. Restore them.
In case of permission related errors, in the "Preferences" of helper, check the option: "Remount data"
Join the migrate telegram group while you're at it. The newest alpha doesn't have this issue as i heard and it's only available though telegram right now.
Click to expand...
Click to collapse
Internal storage is working, tried that first since had problems with CelsiumOS. Next time I will try unpacking directly on the folder.
I'm on Stock right now since I need to play Cod Mobile =)

New Evolution X build is available now !
Source changelog:
- Upstream to latest Evolution X source
Device changelog:
- Remove APEX support (Storage is fixed now)
- Fix glitchy animation (Evolutin X Team removed this fix without any reason)
You can download it in first post

What the benefit of "Allow signature spoofing" if GAPPS already included lmao since this is mainly used for MicroG.
Also do safetynet pass in this rom?

Palcorix said:
What the benefit of “Allow signature spoofing” if GAPPS already included lmao since this is mainly used for MicroG.
Also do safetynet pass in this rom?
Click to expand...
Click to collapse
Safetynet pass, tested on previous version, will install this update today (thanks to covid-19)

This ROM is much better than previous one, my lil complain is just the brightness seems too high. If there's another way to reduce it please lemme know. Thank you and hope this ROM still maintained.

Stuttering on 4k hdr video playback on vlc and mx player pls fix
---------- Post added at 10:16 AM ---------- Previous post was at 10:11 AM ----------
RP1408 said:
Stuttering on 4k hdr video playback on vlc and mx player pls fix
Click to expand...
Click to collapse
Everything else is working fine just this problem. 4K hdr video playback works fine on previous releases and miui. I just saw this issue on 18.03.2020 builds from here and cesium OS

Can u add the 64 mp support in the next ypdate?

First of all thank you to developers.
The questions I have are:
1- is necessary (when we are still in a Android 9 ROM) make the fastboot flashes that are in "GUIDE -INFO-PSA- Redmi Note 8 Pro - Megathread", if flashing the ROM has problems, to make possible reinstall the starting point Android 9? (it does not cause problems to flash Evolution after that ?);
2- where do I find Indian vendor ? (I'm in a Global ROM, it has vendor.img, but is the Global one).

Related

[DEV][β] OmniROM [Unofficial] [8.1] [D6603/33/53/83] Z3 (Leo)

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OmniROM
Android 8.0
Sony Xperia z3 (all variant)
​
What is Omnirom?
A Android custom rom announced at the BABBQ (Big Android BBQ) in late 2013 by @XpLoDWilD, @Chainfire, @Dees_Troy & Team.
"The goal of Omni is to experiment with Android development because we enjoy it. Omni isn’t better, just different. "
For more information go to omnirom's website
Code:
#include <disclamer.h>
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
* If you dont like this rom, Stay away from this thread!
*/
TWRP with hardware decryption support can be found here
Usefull Links
You want to contribute to Omni? CLICK ME
You want to see the github? CLICK ME
Omni Wiki LOOK HERE
Contributors CLICK HERE
Who can use it
It is only for Z3 (single or dual) and UNLOCKED UPGRADED BOOTLOADERS​
How to install
%= Only needed at first flash
% Update ROM to .291 with emma (or Flashtools)
% When install is done go into fastboot mode (plug usb + vol down key = blue led)
% Flash TWRP / If you already are in .291 and have a working TWRP (modded rom/kernel/adv kernel) you can use the flashable zips below instead.
Shutdown the device
Unplug the usb cable
Maintain volume down & power until you see twrp splash screen
% Wipe system, cache and data (factory-reset)
Install rom zip (+
% gapps if you need it, any size is ok
%Install root from @phhusson )​
Reboot
Rolling back to stock
Flash stock rom with emma or flashtool
If you flash with flashtool remember to check wipe apps_log and userdata partitions to get a clean install
Stock compatible TWRP
Sources
Manifest file.
Everything else is omnirom.
Contribute gerrit.
This rom is not pure OmniRom, but close to, for convenience purpose. Roms are build from this script and can contain some lightweight modifications (like mkshrc, or TWRP app disabling, @nailyk certificate authority included, etc...) but will never have heavy changes like replacing an app by another, etc...​
Downloads:
Latest release
2018-01-01:
md5: d6b1929cb7ce4f6c8fbc06d1487cd881
download mirror​What's new:
Switch to OmniRom 8.1
Full treble device
Clean camera code
Reworked devices trees
Add APTX support
GPS fixes
Click to expand...
Click to collapse
Release Timeline
2017-12-10:
md5:
download​What's new:
Do not forget this update require a full wipe!
2017-11-03:
md5:
download
2017-11-01:
md5:
download​What's new:
Code:
Restore double tap to wake from 26502 & 26504
Attempt to fix wifi acess point with 26524
Enable Messaging app (26526) & FM app (26527)
2017-10-29new:
md5: 70bf59e28cef54046e7eb4822a95c906
download​What's new:
^z^z^z
Let's start again ​
XDA:DevDB Information
omnirom-oreo-z3, ROM for the Sony Xperia Z3
Contributors
nailyk, Dobsgw
ROM OS Version: 8.x Oreo
ROM Kernel: Linux 3.4.x
Based On: OmniRom
Version Information
Status: Beta
Created 2017-10-29
Last Updated 2018-01-01
Known issues:
- Video recording broken
- 120fps / 4k recording
- Wifi access point on 5GHz until country is set
- Off mode charging while connected to computer
- Quick charge
- Dual sim swap problem. After a change all the slot1 is lost!
- 4G connection issue until connected to a WIFI network.
- Audio problems. Depending on actual test could be:
1. No audio while ok siri is enabled,
2. Echo while on speaker mode.
- Wifi drop while ipv6 is set with router advertisements
How to post
Reports without logs or step to reproduce are useless (read contribute).
You are welcome to post your review: what is working, not working, etc... Check into know issues before.
You are welcome to report any typo, error, etc...
Try to keep thread clean as a dev reference. Thanks in advance.​
How to report problems
To report problem, please provide logs.
It is always better to include reference to the Installed version. This guide is really detailed and explained everything about bug reports.
If you have any doubts, take the most logs. There is never enough logs ​
How to get logs
If your device is not booting at all, we need information about how you flash and all the handling you do, the display status, light status, and if available a dump of /proc/last_kmesg*
If you have a non working peripheral (non-working radio/wifi/etc...) please provide a full logcat and full dmesg, example:
Code:
adb reboot
adb wait-for-device
adb shell dmesg > dmesg.log
adb logcat -d > logcat.log
If you have a non working app please provide a partial logcat:
Code:
adb reboot
adb wait-for-device
adb logcat -c
<launch your app>
adb logcat -d > logcat.log
On this rom, there is a script who detect device at install time and provide the right functions for single or dual sim. If you have modem problems (like data not working or no signal) please also provide the /tmp/recovery.log.:
If you have ADB access to your device in twrp just use
Code:
adb pull /tmp/recovery.log .
after flashing omnirom.
If you do not have ADB access use the 'copy to SD' button in the advanced tab, then transfer it the way you like.
then upload your files to a service like pastebin.com / paste.omnirom.org
How to contribute
Code is like hieroglyphs for me:
No worries you can contribute anyway! Install the rom, do tests, read failure logs, look at internet for potential fix/similar users experience, is the biggest part of debugging. Then collect all of this and write your results here.
Code is like hieroglyphs for me and logs are worst:
No problem, collects logs the right way if you can, explain how you encounter the problem: detailed step to reproduce could be enough: explain exactly how you encounter the error/problem, it should produce each time someone repeat your steps. Then we will be able to fix it.
bar
Excited for the fresh start on Oreo
Thanks for supporting Leo!
Taste, thanks for you hard work ?
And now delete text and save it? Thats right?
Problem with error7 on d6603 (leo)
Sent from my Xperia Z3 using XDA-Developers Legacy app
santeria27 said:
And now delete text and save it? Thats right?
Problem with error7 on d6603 (leo)
Sent from my Xperia Z3 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Sent from my Xperia Z3 using XDA-Developers Legacy app
Hello guys,
As mentioned error 7 for 6603, but can be fixed via provided workaround for now☺
My sim card was not detected at all. System was asking for sim card insertion. ? (I wiped everything before installation, flashed zip and gapps nano, tried also the same with sideload)
I had to directly switch back, because I need working phone today. But I will try to provide logs as soon as possible.
Thank you a lot!
santeria27 said:
View attachment 4317281
Sent from my Xperia Z3 using XDA-Developers Legacy app
Click to expand...
Click to collapse
Sent from my Xperia Z3 using XDA-Developers Legacy app
Hi, I'm still failing
i got error 7, i made changes to script file, zipped the entire folder again. now the twrp says the zip file is corrupt. what am i missing.
Gixchi said:
i got error 7, i made changes to script file, zipped the entire folder again. now the twrp says the zip file is corrupt. what am i missing.
Click to expand...
Click to collapse
Check the basic structure of your zip, if it corresponds to the original one. If this is not the problem zip it with other tool...
am gonna upload a fixed zip.
@nailyk will you update the rom to fix the BT and Hotspot soon?
And thanks for this great rom
release 3
That's a failing launch
So new zip with already removed assert, and some fix for single sim who do not have data. Please wipe /system before flashing.
Looks like another expected issue pop out: BT is broken. We are currently working on it. (bt was working 2 days ago )
Sorry for the mess
Looks very good. Even with October security patch level.
I know it may be a little early, but can you say anything about battery life (especially standby) compared to 7.1.2 or stock?
nailyk said:
That's a failing launch
So new zip with already removed assert, and some fix for single sim who do not have data. Please wipe /system before flashing.
Looks like another expected issue pop out: BT is broken. We are currently working on it. (bt was working 2 days ago )
Sorry for the mess
Click to expand...
Click to collapse
I excited to install it but i think to wait stable release to be good for daily use
Br4no said:
Check the basic structure of your zip, if it corresponds to the original one. If this is not the problem zip it with other tool...
Click to expand...
Click to collapse
thanks it helped. zip structure was not right
Ok lets start again.
New zip uploaded, we will base the work on this one.
Sorry again. Wont post zip at 4AM anymore!

[ROM][UNOFFICIAL]LineageOS-14.1 for deb/flo | Android 7.1.2 Nougat [MAY 2023]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
LineageOS is based on the Android Open Source Project with extra contributions from many people within the Android community. It can be used without any need to have any Google application installed. Linked below is a package that has come from another Android project that restore the Google parts. LineageOS does still include various hardware-specific code, which is also slowly being open-sourced anyway.
Code:
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
What's working :
Everything that worked in last OFFICIAL build.
There are NO MODIFICATIONS at all. If something didn't work in the last official LineageOS release, it wont work in this build.
Instructions :
Download build and copy it to Internal Memory
Reboot to TWRP recovery
Create TWRP Backup (Recommended)
Flash the latest build (Clean Flash if coming from any other build)
Flash Magisk/LineageSU zip (Optional)
Flash GApps/MicroG (Optional)
Reboot
Downloads :
deb
Build: lineage-14.1-20230514-UNOFFICIAL-deb.zip
MD5: 534dff964ca9c44a8ab00e6a6d3883f9
flo
Build: lineage-14.1-20230514-UNOFFICIAL-flo.zip
MD5: 66a094b14a1f1531af1d195bf787a03b
TWRP
deb: twrp-3.4.0-0-deb.img
flo: twrp-3.4.0-0-flo.img
followmsi builds: TWRP-followmsi
Root Method:
Magisk: here
LineageOS su: here
Addon (GApps/MicroG):
GApps: BiTGApps (arm 7.1.2)
MicroG (Built via FriendlyNeighborhoodShane repo): MinMicroG.zip
Source Code: https://github.com/LineageOS
Proprietary Files: TheMuppets
Kernel Source: Here
ROM OS Version: 7.1.2 Nougat
ROM Kernel: Linux 3.4.0
Security Patch: May 2023
Created 2021-01-12
Last Updated 2023-05-14
Older Builds
Downloads:
AFH Google Nexus 7 (2013) Root Folder (Builds older than July 2022)
SourceForge - deb
SourceForge - flo
Thank you.
Hi,
Somehow I'm not being to properly install and boot this build.
I repartitioned, then restored the stock partitions via the same script; installed the above TWRP.
I can only see the LOS logo for a very long time.
Any idea what it could be?
Thank you,
aurocha said:
Somehow I'm not being to properly install and boot this build.
I repartitioned, then restored the stock partitions via the same script; installed the above TWRP.
I can only see the LOS logo for a very long time.
Click to expand...
Click to collapse
I am not sure what you mean. This ROM runs on reparttioned device only. Boot into recovery, select wipe, select system partition and tap on 'resize or repair' button (you don't need to repair or resize, it's just to check partition size). There will be a report on partition size. This size should be above 1.1 Gb or the ROM won't boot. Exit this page without doing any modifications. If the partition size is 800 Mb or so you have to repartition the device.
aurocha said:
Hi,
Somehow I'm not being to properly install and boot this build.
I repartitioned, then restored the stock partitions via the same script; installed the above TWRP.
I can only see the LOS logo for a very long time.
Any idea what it could be?
Thank you,
Click to expand...
Click to collapse
You do not need to repartition. It works correctly on stock partition scheme (system with 832M size). Also, make sure that in TWRP, all your partitions are in ext4 format.
Try doing this:
- Goto Wipe -> Advanced wipe -> select all partitions and then swipe. Once done go back to main menu
- Goto Wipe -> Format Data -> type "yes" and then press enter. Once done go back to main menu
- Goto Reboot and then select Recovery
- After reboot, tick the "allow system modification" and then swipe to enter TWRP.
- Connect to Laptop/PC and copy lineageos.zip
- Flash only lineageos.zip (for testing)
- Reboot
If you get the welcome screen, then there should be an issue with any other zips that you are flashing along with the ROM.
Os_A said:
I am not sure what you mean. This ROM runs on reparttioned device only. Boot into recovery, select wipe, select system partition and tap on 'resize or repair' button (you don't need to repair or resize, it's just to check partition size). There will be a report on partition size. This size should be above 1.1 Gb or the ROM won't boot. Exit this page without doing any modifications. If the partition size is 800 Mb or so you have to repartition the device.
Click to expand...
Click to collapse
cm-14.1 works with stock partition scheme. You need repartition only for Android 9 ROMs and above (If I am not wrong as I don't know about oreo)
I have successfully installed on my Nexus 7 (2013) LTE (deb) with stock partition scheme.
M4Master96 said:
You do not need to repartition. It works correctly on stock partition scheme (system with 832M size). Also, make sure that in TWRP, all your partitions are in ext4 format.
Try doing this:
- Goto Wipe -> Advanced wipe -> select all partitions and then swipe. Once done go back to main menu
- Goto Wipe -> Format Data -> type "yes" and then press enter. Once done go back to main menu
- Goto Reboot and then select Recovery
- After reboot, tick the "allow system modification" and then swipe to enter TWRP.
- Connect to Laptop/PC and copy lineageos.zip
- Flash only lineageos.zip (for testing)
- Reboot
If you get the welcome screen, then there should be an issue with any other zips that you are flashing along with the ROM.
cm-14.1 works with stock partition scheme. You need repartition only for Android 9 ROMs and above (If I am not wrong as I don't know about oreo)
I have successfully installed on my Nexus 7 (2013) LTE (deb) with stock partition scheme.
Click to expand...
Click to collapse
Hi,
Just wanted to report that, after restoring my tablet with official image from Google and wiping it and flashing lineageos-14.1, it all went ok.
I then proceeded to flash BitGapps core and Magisk and it's running like a charm.
I don't know why it wasn't running, but I decided to revert back to the original partition scheme, restore stock images, and start all over again.
This version is stable, fluid and fast, and probably it's the best version for our device, since Android Q seems to be a bit more heavy on resources (tried the official flox build).
Thank you for keeping our device alive!
Regards,
aurocha said:
This version is stable, fluid and fast, and probably it's the best version for our device, since Android Q seems to be a bit more heavy on resources (tried the official flox build).
Click to expand...
Click to collapse
I felt the same which is why I went back to Nougat.
I use microg as only use it for watching movies/tv shows and for reading. AuroraOSS works like a charm for installing apps.
By the way, If you want things like DT2W (double tap to wake), overclocking CPU/GPU, etc... you can also flash ElementalX-N7-6.17 kernel
M4Master96 said:
I felt the same which is why I went back to Nougat.
I use microg as only use it for watching movies/tv shows and for reading. AuroraOSS works like a charm for installing apps.
By the way, If you want things like DT2W (double tap to wake), overclocking CPU/GPU, etc... you can also flash ElementalX-N7-6.17 kernel
Click to expand...
Click to collapse
Yep, that's the kernel I'm running. Mainly because of DT2W. Loads of options when flashing because of the Aroma installer and easily manageable with exkm, which I bought some years ago.
M4Master96 said:
By the way, If you want things like DT2W (double tap to wake), overclocking CPU/GPU, etc... you can also flash ElementalX-N7-6.17 kernel
Click to expand...
Click to collapse
When you flash this kernel, is there a way to re-apply/restore existing settings? I have had to go through the Aroma installer and manually enter the same settings after every update, but I can see an elementalxbackup file in my Internal Storage, which would be much easier to use if possible!
plusminus_ said:
When you flash this kernel, is there a way to re-apply/restore existing settings? I have had to go through the Aroma installer and manually enter the same settings after every update, but I can see an elementalxbackup file in my Internal Storage, which would be much easier to use if possible!
Click to expand...
Click to collapse
I think you need to use EX Kernel Manager app from Play Store which is basically app developed by the same person who built ElementalX kernel for managing the kernel. But you will need to Root your device for the app to work (if I am not wrong)
this looks great - thank you - does it work with any of the Custom Kernels?
February 2021 Security Patches
deb
Build: lineage-14.1-20210208-UNOFFICIAL-deb.zip
MD5: 7ed9473d325d20b863d1516d902602d7
flo
Build: lineage-14.1-20210208-UNOFFICIAL-flo.zip
MD5: 9a6617aa7111b4c91daf310e7bf09183
Added links in first post
M4Master96 said:
I think you need to use EX Kernel Manager app from Play Store which is basically app developed by the same person who built ElementalX kernel for managing the kernel. But you will need to Root your device for the app to work (if I am not wrong)
Click to expand...
Click to collapse
Ah I suspected this, hmm
thanks
Thanks all you guys, was looking for a decent rom for this tablet, can't live without doubletap2wake and newer roms are just too heavy for this gadget, was looking for a decent rom for it, and I have finally find it
March 2021 Security Patches
deb
Build: lineage-14.1-20210309-UNOFFICIAL-deb.zip
MD5: 6d23b5115b073a6d9a85981cb6abac11
flo
Build: lineage-14.1-20210309-UNOFFICIAL-flo.zip
MD5: 39f1a8945af9870369ffdd1deefb5e4c
Updated links in first post
First also a big THX from me for supporting our good old nexus7. You mentioned in #8 that you use microg only. How can i achive that? Is there a ready made microg.zip i can just flash with twrp after rom?
sundog1 said:
First also a big THX from me for supporting our good old nexus7. You mentioned in #8 that you use microg only. How can i achive that? Is there a ready made microg.zip i can just flash with twrp after rom?
Click to expand...
Click to collapse
I create flashable microg zip via https://github.com/WeAreFairphone/flashable-zip_microG and then flash it along with ROM, magisk and kernel. Afterwards, I use SmaliPatcher Module to patch and enable SignatureSpoofing so that MicroG works.
I had also raised Merge Request in lineageos4microg so that We can build ROM with microg without syncing repository but my MR is still open and so, Not able to build that.
April 2021 Security Patches
deb
Build: lineage-14.1-20210409-UNOFFICIAL-deb.zip
MD5: 627ce7454888bc71aec2fea10e6023ce
flo
Build: lineage-14.1-20210409-UNOFFICIAL-flo.zip
MD5: 54ac5466ae8df749a6650ee1c7b28e82
Updated links in first post
aurocha said:
Hi,
Just wanted to report that, after restoring my tablet with official image from Google and wiping it and flashing lineageos-14.1, it all went ok.
I then proceeded to flash BitGapps core and Magisk and it's running like a charm.
I don't know why it wasn't running, but I decided to revert back to the original partition scheme, restore stock images, and start all over again.
This version is stable, fluid and fast, and probably it's the best version for our device, since Android Q seems to be a bit more heavy on resources (tried the official flox build).
Thank you for keeping our device alive!
Regards,
Click to expand...
Click to collapse
Hi,
May i know which 'official image' you restored and which version of twrp was used?
I flashed LOS 18.1 before and it work but seems lag. Then I tried to flash this ROM but faced the same problem, endless looping is the screen of upwards arc w/ circle (LOS logo?) running from right to left again and again.
Thank you!
Update: Well, i just follow the link provided by @JT1510365 in https://forum.xda-developers.com/t/...oted-unmodified-6-0-mra58v-flashable.3694735/ and download the stock rom, restore to 6.0, it boot normal. Then flash twrp & this rom and it work now.
Thank you for your share of the reinstallation of 'official image'.

[ROM][11] crDroid 7.17 [begonia/begoniain][OFFICIAL]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
*** Disclaimer
I am not responsible for any damage you made to your device
You have been warned
crDroid is designed to increase performance and reliability over stock Android for your device also attempting to bringing many of the best features existent today
Features:
https://github.com/crdroidandroid/crdroid_features/blob/11.0/README.mkdn
Instructions:
First time installation:
Carry out the necessary measures to unlock the bootloader.
Connect the phone to the PC with the supplied cord.
Transfer all valuable data from your phone's internal memory to PC. If you make a backup, then the folder with the backup (except if the backup is located on microSD).
Reboot into Fastboot mode (see the header in the F.A.Q. for how to enter it)
Download and unpack on your PC >> this << archive.
In the unpacked archive, go to the folder with your device type (if you have an Indian phone, then in [begoniain], all others in [begonia].
Run !_FLASH_IT_W.bat on Windows or !_FLASH_IT_L.sh on Linux (DO NOT CHANGE THESE SCRIPTS UNLESS YOU WANT TO GET A BRICK!!!)
If something went wrong, check if ADB drivers are installed on Windows, or fastboot packages on Linux.
The necessary images will be flashed and erased, etc., after which the phone itself will reboot into TWRP recovery.
Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot from TWRP to TWRP
Make sure your phone's internal memory is opened in TWRP mode on your PC.
Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps, if you need them.
Do a Wipe/Cleanup of the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
Click Installation / Install and select the archive with the firmware, then click the Add / Add button and select the archive with Google Apps, everything else will be installed and updated automatically.
After installation, reboot again from TWRP to TWRP
Make the format Data (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
After booting the system, perform the initial setup, and then reboot.
TWRP installation:
Before starting the ROM installation, it is recommended to take measures to unlock the bootloader and save the critical sections of the phone.
Save important data, photos, and more.
Download and place the archive with the firmware in the internal memory of the phone, as well as Google Apps if you need them.
Reboot into TWRP if you're not already there (reboot by holding the volume up button).
Wipe/Cleanup the "system", "vendor", "cache" and "Dalvik|Art Cache" partitions.
Click Install/Install and select the firmware archive, then click the Add/Add button and select the Google Apps archive, everything else will be installed and updated automatically.
After installation, reboot from TWRP to TWRP
Do data formatting (section Wipe / Wipe, click the Format Data button, then enter "Yes").
Reboot into the system and wait for initialization, usually 10 minutes is enough, if the download still fails, reboot forcibly into recovery (long hold volume up + on) and repeat the Format Data operation
Once the system has booted, perform the initial setup and then reboot.
Update installation:
USE THESE INSTRUCTION ONLY FOR UPDATING FROM MY PREVIOUS BUILD TO A NEW !!!
Make backups.
Download and place the ROM to the internal memory of the phone
(I do not recommend SD cards, often phones fail because they turn out to be broken)
Reboot in TWRP (vol+ with power button)
Click on Install menu and chose this ROM
After installation click on "Wipe Art/Dalvic" button
Reboot to system
If you have a bootloop, make Format Data in TWRP (all data will be erased).
Rollback to the factory firmware:
Download and unpack any MIUI Fastboot version ROM for begonia or begoniain
Reboot to Fastboot mode (vol- or vol+ with power button)
Run flash_all.bat on Windows or flash_all.sh on Linux
DO NOT USE OTHER ROLLING METHODS IF YOU DO NOT WANT TO GET BRICK !!!
Sources:
ROM: https://github.com/crdroidandroid
Device: https://github.com/TTTT555/device_xiaomi_begonia
Kernel: https://github.com/TTTT555/kernel_xiaomi_begonia
Credits and Thanks:
@DarkJoker360Dev
@SoldatSempai
And to all begonia devs, who is working on an open tree for our device.
Visit official website @ crDroid.net
crDroid Community Telegram
crDroid Device Telegram (links to donations to the author here)
crDroid Device Telegram RU zone
My Telegram
Donate to help crDroid team pay server costs.
XDA:DevDB Information
crDroid, ROM for the Redmi Note 8 Pro
Contributors
TTTT555
ROM OS Version: Android 11
Based On: crDroid 6.x / crDroid 8.x
Version Information
Status: Stable
Notes:
- If you have bootloop after installation, try format data again or to change GAPPS.
- Reboot after a clean install and initial setup so that the BegoniaParts item appears in the settings.
- GAPPS and Google Photo required for G-Cams.
- If you will use Viper FX, then do not forget to enable legacy mode in the application settings.
- If you will use the built-in G-Cams, do not forget to apply configs (three taps between the camshot button and gallery button). If the camera does not find the built-in configs, just reboot the device and try again.
- If you OFF James DSP after ON, reenable Dirac (OFF/ON), if you need it.
- If you OFF G-cam 64 after ON, reboot the device, otherwise bugs are possible.
- ANX cam: If you have problems with a wide angle camera - just turn off the lens distortion correction function, or set the mode to 9/16.
===== 11 May, 2022 =====
* Device tree:
- Based on A-11/12 device trees (R-OSS) by @DarkJoker360
- Packed required firmwares with TWRP into the ROM archive
- Added in-call volumes fix via script
- Rewrote display props
- Rewrote overlays to such as on crDroid v.6.25
- ZRAM fixes and tweaks
- Perfomance and battery optimizations
- Added lost sepolicy denies
- BegoniaParts: Fixed Vibrator's Strenght restore after reboot
- Add G-photo unlim
- MTK Wi-Fi Display injection
- Enable privapp permissions control
- Added MTK Engineer Mode app
- Additions for manifest and compatibility matrix
- Inbuild configs for inbuild G-cams
- Some audio optimizations
- Some init optimizations
- And something else
* Kernel:
- Based on R-OSS kernel tree by @DarkJoker360
- Declare CocoLite kernel
- Add xt_HL module (TTL)
- Add "sioplus" I\O scheduler and make it by default
- Add ALMK
- Some performance improovements
- Some tweaks for support BegoniaParts
- Enforce selinux via cmdline
* BegoniaParts:
- Dirac sound instead MI sound
- Viper with on/off switch (audio)
- James DSP with on/off switch (audio)
- DB FX with on/off switch (audio)
- Switch for some EAS Governors
- Switch for Governor's ratio
- Codec switch
- TCP congestion switch
- Wi-Fi MTK Sta2 mode switch
- Switch for enabling 900 mA via USB
- Switch for disabling MI thermal (if you want)
- Camera switch (ANX, G-cam Burial 8, G-cam true 64 MP)
- V-Sync disabler (if you want)
- Switch for activating debug.sf.latch_unsignaled (if you want)
- Switch for disabling HW overlays (if you want)
- True FPS Info switch
- Gestures section
- 10 point vibration strenght switch
/ Thanks to @7Soldier for help with some features /
i dit a first install of android 11 crdroid. works perfectbut now my twrp is decrypted, ow do i decrypt?
@TTTT555
Is it similar to Rom of VNDK30?
Just that needs the TWRP metadat version to flash , right?
gadmei.tw said:
@TTTT555
Is it similar to Rom of VNDK30?
Just that needs the TWRP metadat version to flash , right?
Click to expand...
Click to collapse
I downloaded the correct metadata and i flashed it with fastboot. Now i can decrypt
Hi.
Does call recording work on this ROM?
reist said:
I downloaded the correct metadata and i flashed it with fastboot. Now i can decrypt
Click to expand...
Click to collapse
i have the same problem. where did u find metadata ?
ariber14 said:
i have the same problem. where did u find metadata ?
Click to expand...
Click to collapse
Go here. And download the 3.4.0.4 metadata and flash it.
How i fix the low quality in videos of instagram???
*edited
Nevermind, thanks
Hi all, anyone using this as their daily driver? Keen to hear how is going. Thanks
Thanks
Thank you for your Work.
Trcamera doesnt Work for me.
In Anx also my front cam doesnt Work.
Any solutions?
The ROM is fast!
NikGApps is working fine to me (I don't know if Google Auto and Google Assistant work because I don't use them).
Trcamera crashes when going to gallery. This fixed when I flashed the omni version of NikGApps. Turns out that the default app for gallery must be Google Photos (AOSP Gallery not working for trcamera)
I don't know about the charging... It says it's it's slowly charging even if I'm using the original fast charger of my phone.
This ROM is awesome nonetheless and thank you devs for keeping up the good work!
Akira10 said:
Trcamera doesnt Work for me.
Click to expand...
Click to collapse
I uninstalled the pre-installed trcamera and installed this version.
Before doing that, flash this buffer fix in Magisk.
d4dave said:
Hi all, anyone using this as their daily driver? Keen to hear how is going. Thanks
Click to expand...
Click to collapse
I've been using this for quite a while now...
mostly stable in everything. Both the Cameras are fine. All features functional. Charging and battery performance all good. The pixel launcher feels buggy with the recents tray so using the crdoid home app. Pretty good.
jeane_uglypish said:
The ROM is fast!
NikGApps is working fine to me (I don't know if Google Auto and Google Assistant work because I don't use them).
Trcamera crashes when going to gallery. This fixed when I flashed the omni version of NikGApps. Turns out that the default app for gallery must be Google Photos (AOSP Gallery not working for trcamera)
I don't know about the charging... It says it's it's slowly charging even if I'm using the original fast charger of my phone.
This ROM is awesome nonetheless and thank you devs for keeping up the good work!
Click to expand...
Click to collapse
The assistant is working fine with full functional voice recognition. But changing the device fingerprint to something else creates a problem with Ok google because The assistant 2.0 or later gets installed and something happens. ( I haven't used android auto too so no comment).
I also flashed nikgapps full package and everything is fine.
The slow charging problem that u have is not happening with me. What happens is that at the starting it shows charging slowly. Then after a few seconds or a minute it starts charging rapidly.
@TTTT555 do you really need to wipe the internal storage ? It's kinda lame to have to copy everything, couldn't you just wipe data ?
Shafin2315 said:
I've been using this for quite a while now...
mostly stable in everything. Both the Cameras are fine. All features functional. Charging and battery performance all good. The pixel launcher feels buggy with the recents tray so using the crdoid home app. Pretty good.
Click to expand...
Click to collapse
You mentioned "both the cameras are fine", do you mean the rear and front camera?
thank you very much
kirinin said:
You mentioned "both the cameras are fine", do you mean the rear and front camera?
Click to expand...
Click to collapse
Oh, no no. I meant trCam and AnXcam app...both are working pretty fine so far. My rear and front cam works fine anyways. I have the old device. I am not on the new one.. I think I know what ur trying to say. Ur front cam probably doesn't work ri8? I'm pretty sure in most of the threads people said that the new device kernel hasn't been released and new cam isn't responding in many roms because of that. Honestly i don't think there's any workaround for that unless the kernel is officially released.

[ROM][UNOFFICIAL][matisse][millet] CypherOS 11

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
This is Cypher. An extension to pure Android. Cypher tries maintain the purity of Android while offering useful features for users. The goal is to give the highest level of performance whilst achieving Simplicity.​
Code:
/*
* Your warranty is now void.
*
* We are not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at us for messing up your device, we will laugh at you.
*/
Get your builds and changelog from our website
get.cypheros.co
Note: Builds are updated as soon as possible. There is no build cycle. Information pertaining to your device is displayed Accordingly. The current build is the latest for your device. If your device is scheduled to release on a certain day, but the new build isn't displaying, contact your device maintainer for more information but wait at least 72 h. Please know builds are updated by 12am EST.
Special Thanks to matteo0026, who is maintaining the device sources and TWRP.
Become apart of our G+ community - JOIN
REMINDER
If you're having issues and want to submit a report (Logcat) please make sure you are reporting from the stock kernel, not a modified kernel. Modified kernels can break or fix, even improve things. It depends. I can't get a full clue of the issue when you're not running the original kernel.
Click to expand...
Click to collapse
Features:
- Status bar Customization
- Changeable icons
- Quick pulldown
- Smart pulldown
- Notification count
- Clock position
- Seconds in clock
- Date design
- Quick Settings
- Brightness slider
- Brightness icon
- Tile tap customization
- System
- Screenshot partial and full
- Scrolling cache customization
- Power menu customization
- One-handed mode
Credits
LineageOS
AICP
PureNexus
AOKP
Dirty Unicorns
Paranoid Android
and more..
Installation instructions :
Be sure to have installed the latest TWRP recovery (you can find it in downloads)
Download the latest build and GApps (ARM, 9.0, I advice pico package) and copy it to your external SD-Card
Make a full Backup of your Data and copy it to your external SD-Card or USB-OTG
Boot to recovery mode
Wipe > Advanced wipe > Select system, data, cache and dalvik/art cache (and, if you want to clean more, select even internal storage, which deletes all the content in /sdcard) and do swipe to wipe. Format /data. When it's finished go to home page
Install > select ROM zip file > swipe to flash and when it's finished go to home page
Do the same thing to flash GApps and Root (if needed)
Reboot > System
Update instructions :
Be sure to have installed latest TWRP build
Download the latest build
Boot to recovery mode
Install > select ROM zip file > swipe to flash and, when it's finished go to home page
Reboot > System
Known issues
Mirror Screen maybe broken
Uplink to Chromecast maybe broken
Downloads (ROM)
matisse (10.1) devices: Androidfilehost, Mega
millet (8.0) devices: Androidfilehost, Mega
Matisse and Millet via Github
Other Stuff
TWRP Recovery Matisse and Millet: XDA, Mega, Matisse, Millet
GApps: https://opengapps.org/ (ARM, 11, Best to use is Nano or Pico) or
GApps: MindTheGapps
Magisk: https://github.com/topjohnwu/Magisk
Contributors:
crazydrive22, matteo0026 and all the S3NEO devs that provided the base for developing Pie on Tab 4
Source Code:
https://github.com/lineageos for samsung msm8226 common device and kernel source, with some patches coming from Gerrit for device source
https://github.com/s3neo for matisse and millet and specific variants device and vendor source
Thread started at 2021-09-24
Thread updated at 2022-01-20
New Updates for CypherOS are online.
Changelog
-Security Patch October '21
-Synced with LOS-Source
-A lot of work under the Hood from @matteo0026
Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.
Dvalin21 said:
Wonderful rom sir. My first issue is that Im not able to sign into playstore when or get past "Getting tablet ready" it always says "Couldnt connect" Not sure if its the rom or the gapps but im using opengapps. Anyway, thank you so much for the hard work that you have done with this rom. Extremely impressed. Thank you so much and looking forward to see more of your work.
Click to expand...
Click to collapse
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.
crazydrive22 said:
Are you sure Wifi is connected?
If yes, try a different package of Gapps or try to restore a older backup (/data only) from a different ROM, if you have. Also be aware, that our tablets cannot connect to Routers with WPA3.
This will be fixed in one of the next builds.
Click to expand...
Click to collapse
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later
Dvalin21 said:
I tested mindthegapps from this link https://www.cyanogenmods.org/downloads/mindthegapps-11-0-download/ its letting me setup, so it just opengapps that is the issue. Will share more later
Click to expand...
Click to collapse
Aye. Sometimes the Setup Wizard is causing troubles.
logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though
Dvalin21 said:
logcat and kernel logs. Also, the button for the camera is so low on the screen its cut off. I tried to make a phone call earlier, but it would just end the call immediately. Im able to get on the internet with 4G though
Click to expand...
Click to collapse
Hi. I´ve tested the Issues you mentioned.
The Camera App seems to be broken or has a wrong resolution. That´s nothing i can fix but i´ll report it to the devs. As a workaround install Open Camera. This App is working normal.
I tested phonecalls (in and out) with 4G and Edge. Both are working for me.
Maybe there´s an issue with your local provider. If the problem persists, i would suggest to dl ROM and Gapps again (maybe a file is corrupted), delete your ROM in TWRP + format /data and do a clean install of both, ROM and Gapps. Often this will fix those errors.
Your logcat is looking not too bad except a crash of firebase, what definetly could cause the trouble. But we´ll see it, if you´ve done a clean and fresh installation.
Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?
Utherbone said:
Hi, I got the SM-T531 tablet and I'm going to download this ROM and see how it behaves I will do all the possible tests I can do, to contribute. There's no way the 3g works right, just connections right?
Click to expand...
Click to collapse
Yes, unfortunately 3g isn't working at any ROM from 9 to 11.
Matteo is working on it but with no success so far.
New Files are up!
-synced with LOS-Source
-Security Patch November 2021
-all Devices are now able to use WPA3
Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.
Utherbone said:
Hi @crazydrive22 . I'll take the opportunity and ask you a question of mine. I'm having trouble flashing any SM-T531 compatible roms. I will list the steps I followed.
1 - Flasing twrp with heimdall. At first I tried here: https://twrp.me/samsung/samsunggalaxytab4101.html but ta off the link there.
I downloaded it here on the XDA forum: https://forum.xda-developers.com/t/recovery-3-5-2_9-unified-matisse-millet-twrp-recovery.4019831/ ;
2 - full wipe and format;
3 - Flashing this rom (with or without gapps) Resulting: Loop in Samsung logo or should I wait too long?
Thanks for working.
Click to expand...
Click to collapse
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.
crazydrive22 said:
Hi.
First boot can take a lot of time. If it's not booting i would suggest to flash Stock 5.0.2 and start again from scratch. It's nescessary to had 5.0.2 installed once to make sure, that the Bootloader is updated. The Bootloader from KitKat (4.x) is not working with LineageOS 9 or newer and it's forks like crDroid or Cypher. The TWRP from Matteo is good, it's the lastest one and working well. But i can't tell you anything about Heimdall. I'm using Odin only to flash Stock or TWRP.
Click to expand...
Click to collapse
Thanks for the answer, it must be the 4.4.x bootloader, I didn't even ask if I had the 5.x.x one, I'm flashing the 5.0.2 About haimdall. It's wonderful, a point that can be negative is that the process is more manual, you must select each file for its respective partition, the good thing is that with it you can capture the pit file, it is very rare for an error to occur except if there is a problem on the PC or cable. It works on Linux and Windows and Mac OS X. I will return with news.
This is working amazing on my SM-T530NU, far better than whatever Nook bloat that was running before.
Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates. Great job
groulo said:
Installed and tested in matisselte, very good rom, very fluid. Everything works perfectly,
I will continue using this rom, very happy with how it works.
I hope you continue with the updates.
Click to expand...
Click to collapse
THX.
Updates every Month ca. 15th, maybe earlier.
Hello again @crazydrive22. I tested this rom, conclusions, this rom in my normal use, very usable with tricks in developer options "disable animations scale and enable acceleration 2d". Overall is good.
Sorry. I stay practice English, on this time don,t use translator
New Builds are up.
Changelog
-synced with LOS-Source
-Security Patch December 2021
I need help, I have a problem, I have gone to update and I have restarted in recovery mode, but the tablet does not start, it is in a loop restarting all the time. I have disconnected the battery and the problem continues.
What I can do?

[ End-Of-Life ][ROM][A12]KOSP for OnePlus 7[OFFICIAL][guacamoleb]

Code:
/*
* DISCLAIMER: Read this carefully
* Your warranty is now void.
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KOSP is a small project based off AOSP and we intend to improve upon AOSP to provide a stable and better alternative to OEM roms with additional features.
Features
There are some cool features, see for yourself
Truth is I'm just lazy to write a long list of features and we intend to focus on the stability rather than adding a ton of features.
Gapps is included!
What's broken?
- WiFi Display on devices using MiraCast
- You tell me!
Bug reporting:
-> DO NOT report bugs if you're running a custom kernel or you installed Xposed
-> Grab a logcat right after the problem has occurred. (Please include at least a few pages of the log, not just the last few lines, unless you know what you're doing.)
-> Do not approach us without any logs for reporting bugs
-> If it is a random reboot, grab everything from /sys/fs/pstore. (Do not bother getting a logcat unless you can get it just before the reboot. A logcat after a reboot is useless)
-> Remember to provide as much info as possible. The more info you provide, the more likely that the bug will be solved. Please also do not report known issues.
Downloads: Sourceforge : Mirror
Magisk: https://github.com/topjohnwu/Magisk/releases
INSTRUCTIONS
First time installation:
* Unlock bootloader
* Download the fastboot image of the rom (the zip file with "-img" in it)
* Boot to fastboot
* Type fastboot update <fastbootrom>
* Boot to recovery if you are flashing for the first time and format data
(PLEASE FOR THE LOVE OF GOD DO NOT WIPE DATA FROM FASTBOOT YOU LAZY ****)
* Reboot
Upgrading:
Via recovery:
* Reboot to recovery
* Flash ROM zip from TWRP or sideload with ADB (preferred)
* Reboot to recovery
OR
* Download the fastboot image of the rom (the zip file with "-img" in it)
* Boot to fastboot
* Type fastboot update <fastbootrom>
* Flash Magisk and other stuff (optional)
* Reboot
Via updater app: [WIP]
* Open Settings -> System -> KOSP Updater
* Download the ota if available or if you have already downloaded the zip then use it for local upgrade
* Install the update
* Flash magisk to inactive slot (optional)
* (optional) Reboot to recovery if you have anything else to flash
* Reboot
Follow us on Telegram
Credit/Thanks:
Google for AOSP
LineageOS
YAAP
DerpFest
MSM-Xtended
And all others we may have forgotten to credit
Special thanks to @npv12 and also to @AnnoyingZlatan for his amazing kernel.
Thanks to @Mohammed_Gabr for making our awesome banner.
Last but not the least, thanks to all our testers, who have helped us to squash many bugs as possible
KOSP, ROM for the OnePlus 7
Contributors: @Joker123##, @npv12
Device maintainer: HARISH
ROM source: https://github.com/AOSP-Krypton
ROM Kernel: Dora kernel
Kernel source: https://github.com/AOSP-Krypton/kernel_oneplus_sm8150
ROM Firmware Required: OOS 11.0.5.1
Android Version: 12
Based On: AOSP
Version Information
Version: 2.6
Status: Stable
Created 2021-11-09
Last Updated 2022-04-23
congrats for first official build
maksood2088 said:
congrats for first official build
Click to expand...
Click to collapse
Thank you so much I've been waiting for this!
Sorry for being newbie, can you provide more detailed installation guide? I'm on OOS 11.0.4.1 and have my bootloader unlocked, but no root nor custom recovery.
Also if I removed my phone lock (pin and fingerprint) prior to the installation would I still need to format my personal data?
Thanks again!
mvci said:
Thank you so much I've been waiting for this!
Sorry for being newbie, can you provide more detailed installation guide? I'm on OOS 11.0.4.1 and have my bootloader unlocked, but no root nor custom recovery.
Also if I removed my phone lock (pin and fingerprint) prior to the installation would I still need to format my personal data?
Thanks again!
Click to expand...
Click to collapse
Yes and for installation support join the linked telegram
Great work Harish. Also congratulations for first official. Good ROM, highly recommended. Definitely daily driver and better than A11.
Thanks for still continuing to develop for the OP7.
I was a little confused about how to install it, but I'll try to go to the telegram to understand it better.
Great work.
I have installed it yesterday and it is working great and pretty smooth than A11 roms. I am planning to use it as daily driver, not sure if all apps i use including banking apps are compatible with A12 yet. E.g. HSBC India app is broken on this rom. Please confirm if itbcan work. Thanks.
Also request to include face unlock feature under security tab if possible in the next build. Thanks.
gdp1979 said:
Great work.
I have installed it yesterday and it is working great and pretty smooth than A11 roms. I am planning to use it as daily driver, not sure if all apps i use including banking apps are compatible with A12 yet. E.g. HSBC India app is broken on this rom. Please confirm if itbcan work. Thanks.
Click to expand...
Click to collapse
Sorry for noob questions in advance.
I can see installation is done via fastboot only, but after installation we need to format data from recovery.
1. Which recovery to use to format data? I doubt rom comes with a recovery.
2. Format data to f2fs or ext4?
3. How's the situation with widevine L1? If you have it then can you post steps for that as well.
Right now I'm on stock rom with locked bootloader.
himsin said:
Sorry for noob questions in advance.
I can see installation is done via fastboot only, but after installation we need to format data from recovery.
1. Which recovery to use to format data? I doubt rom comes with a recovery.
2. Format data to f2fs or ext4?
3. How's the situation with widevine L1? If you have it then can you post steps for that as well.
Right now I'm on stock rom with locked bootloader.
Click to expand...
Click to collapse
Once you install ROM from fastboot as mentioned in OP, after installation is complete your phone automatically restarts at that time you have to boot into recovery. The recovery this time will be ROM recovery in which you will have to format data before to reboot to system. Hope this helps.
gdp1979 said:
Once you install ROM from fastboot as mentioned in OP, after installation is complete your phone automatically restarts at that time you have to boot into recovery. The recovery this time will be ROM recovery in which you will have to format data before to reboot to system. Hope this helps.
Click to expand...
Click to collapse
Could you describe the step by step installation? I would like to exit A10 10.3.8 for KOSP.
lvints said:
Could you describe the step by step installation? I would like to exit A10 10.3.8 for KOSP.
Click to expand...
Click to collapse
Steps are pretty simple as mentioned in OP. Update your phone to latest OOS (A11) first before to go for this A12 ROM.
The rom is smooth and responsive, I will use it as daily driver.
Issues I face:
1- my voice sounds digitalized or something, using the phone built in mic.
2- The notification panel sometimes become 100% transparent.
3- Sometimes the whole screen flashes with max brightness during fingerprint unlocking. (Maybe started to happen after enabling single tap to wake)
4- In SIMs settings, only the 1st SIM is showing, and I can deactivate it, however, my 2nd SIM isn't showing there and there's no way to deactivate it (both SIMs are working all the time)
5- I think the vibration intensity while setting the alert slider to vibration is quite high (maybe I'm used to OOS).
6- Vibration intensity for notifications is also a little bit high even though I set it as "low" in settings.
The fingerprint unlocking vibration intensity is the perfect intensity for me (I think it's like the OOS one) I hope you can make the "low" option equal to that
I'll update my reply whenever I face new things.
All are minor issues, otherwise, amazing rom, thank you so much I really appreciate all the hard work you do.
P.S. If anyone wants to enable the "single tap to wake" it's under Settings - krypton settings - device settings - touchscreen gestures - single tap. I thought this could help someone.
Does cromecast work?
Does fingerprint work as good as on oxygen os?
Is battery good? I have bad battery on oxygen os 11.0.4.1, android system is eating my battery...
For root i just instal magisk app through fastboot or in the twrp?
Thank you for your anwsers.
Edit: can not install via ADB. Instalation guide is not good for me. Should I unzip file with image or not. Do not have theese problems when instaling other roms. Any help would be apreciated.
kodrnusa said:
Should I unzip file with image or not.
Click to expand...
Click to collapse
No, you shouldn't unzip it.
mvci said:
No, you shouldn't unzip it.
Click to expand...
Click to collapse
Ok but command fastboot update kosp does not execute. It says file not found...
kodrnusa said:
Does cromecast work?
Does fingerprint work as good as on oxygen os?
Is battery good? I have bad battery on oxygen os 11.0.4.1, android system is eating my battery...
For root i just instal magisk app through fastboot or in the twrp?
Thank you for your anwsers.
Edit: can not install via ADB. Instalation guide is not good for me. Should I unzip file with image or not. Do not have theese problems when instaling other roms. Any help would be apreciated.
Click to expand...
Click to collapse
I don't use Chromecast but on telegram people have reported that it works. Just Miracast is not working.
Battery life cannot be determined this soon
Magisk is reported to be working. Need patched boot.img to be flashed via fastboot
You can't install this rom via adb. Only fastboot method works as of now.
kodrnusa said:
Ok but command fastboot update kosp does not execute. It says file not found...
Click to expand...
Click to collapse
Keep the KOSP fastboot ROM img-ZIP file in the platform/fastboot folder. This issue will be resolved
Looks like a new build is up

Categories

Resources