Hello everyone, I use lenovo k6 note phone, the touch is not working stably inconsistently.
so I was unable to activate "developer options" and turn on the "usb debugging" feature.
Despite this, I was able to install software on my phone without any error with the qfil program.
As a result, my phone does not turn on, it shows no signs of life, and when I connect my phone to the computer, it goes into the bootloader loop.
what I can do after that?
@okan_kilkuyruk
Seems you flashed an incompatible firmware. Retry using the correct firmware.
Related
Just got a completely stock, not rooted Vibrant, and when I plug it into the computer, only the phone makes a sound. My computer doesnt even detect that anything new is plugged in.
Furthermore, I went into settings>applications>development and ENABLED (checked the box) USB debugging, and when I go to root the phone with the utility provided by Bay_Wolf, it says "Please enable USB debugging mode". In the menu, the box is CLEARLY checked. Why is my device not being recognized?? My goal is to flash a different rom to the phone, I dont have any info or data to back up, the phone is brand new. Can anyone help??
hello there,
I'm using Galaxy S1 I9000, and my screen just got broken, and shows nothing now (black screen).
I have found this PC software that allows me to see my android device screen Via my computer.
Unfortunately my "USB debugging mode" wasn't turned on, so I am not able to use this software.
I'm able to get inside CWM mode, but I do not know how to enable this option .
so my question is, is there any way to enable usb debugging mode through CWM on the device and ADB on my computer??
I have tried to use the ADB software but when I enter: "adb devices" it shows no devices.
any solution to my problem without buying a new screen?
I used SLIMROM with JB, has CWM 6.
Thank you.
Hello, from today every time I connect the phone to the pc i got the following error message "usb device not recognized"
I tried on several PCs, activating and deactivating the "USB debugging" mounting in recovery and also in download mode, the same error.
this error comes after a blue screen windows caused by a virus.
fortunately charging works, but what can i do? Cause i cant connect to odin too,
Recovery, download and rom are three separate operating systems, to have the same problem in all three would be very unusual. Have you tried a different usb lead, usb OTG, or MHL functions? All I can suggest is factory reset the phone.
I flashed my J7 Prime using Odin and it's official Stock ROM but after that, I am unable to charge my phone and detect on a PC via USB cable. When turned off, the device will charge. When boot to Download mode, Odin will be able to detect the device.
I also tried Service Menu secret codes and wonder why *#2683662# returns Not Supported.
Did something happen to my NVRAM??
On About Device section, everything seems fine. IMEI are still readable, the device status shows that it's Official and even the NTC Approval is present.
Hoping someone could help me.
tyRanouge said:
I flashed my J7 Prime using Odin and it's official Stock ROM but after that, I am unable to charge my phone and detect on a PC via USB cable. When turned off, the device will charge. When boot to Download mode, Odin will be able to detect the device.
I also tried Service Menu secret codes and wonder why *#2683662# returns Not Supported.
Did something happen to my NVRAM??
On About Device section, everything seems fine. IMEI are still readable, the device status shows that it's Official and even the NTC Approval is present.
Hoping someone could help me.
Click to expand...
Click to collapse
Try the code *#0808# to set different modes, also under Developer Options about half way down the menu, there's another settings called USB Configuration where you can set it to Charge This Phone, MTP, PTP, RNDIS, etc.
While the phone is turned off, you can charge it but will not be able to detect it in USB, that's just the way it was designed.
If the phone is turned on, then you can charge it and detect it in the USB mode depending on the above settings.
Good Luck!
Hi,
maybe one of the experts can help...
I have a LEMAX2 with X820_20S_ROW_CUOCO92 ROM.
Since half a year or so the USB-Connection to the PC does not work anymore. Tried several cables and several PCs, no change.
I can boot the phone in RECOVRY Mode, but it It shuts itself off immediately.
I can enter fastboot mode, but the phone is still not recognized by the PC.
When I connect the phone via MyPhoneExplorerClient, WLAN works, but MyPhoneExplorerClient says 'USB-Cabel 'Not conneced.'
When I unplug and re-plug the USB-Cable, for a short time MyPhoneExplorerClient says 'USB-Cabel 'conneced', but no setting option for USB configuration can be found and after a second or so MyPhoneExplorerClient shows 'USB-Cabel Not conneced' again.
I tried to find out how to change or repair the firmware but all howtos require a USB Connection.
Mayby I accidentaly removed some system software responsible for the USB Connection?
Any idea?
:crying:TWSMS