Hello everyone. I have an Mi Box S, and as many others i had the bootloop problem after the update. I tryed to follow the method with the burning tool described here: http://4pda.ru/forum/index.php?showtopic=399304&st=600#Spoil-55136455-3. At first i was taking the error mi box s Verify Failed with sha1sum, origin sum. The at my last attemt i got Romcode/Switch status/Identify/Error. The big problem here is that now i don't have to
short circuit, it's like that i am alwas at firmware mode. Apart from that the front led is not opening now, only the back red. had some else the same problem or does any one has an adivce to my issue?
Is there any chance firmware installed corrupted so for that reason i am automatically in firmware mode?
thanks in advace
try this one
Boot loop fix for Xiaomi Mi Box S after system update
Updating your Xiaomi Mi Box S can result in a boot loop and this will need to be fixed. This
www.ourphonestoday.com
Related
Hello,
so i own a umidigi f1, After trying some roms i wanted to use it's original one, so i downloaded the rom, ext...
but this time i did hit erase all in sp flash tools,
phone working fine, serial number is 1111111111111 and 222222222222, no problem too phone is doing great job.
the only problem is i got a red water mark saying TEE : NOT ACTIVATED/ GOOGLE : NOT ACTIVATED
TEE : Trusted Execution Environment
how can i get rid of it, i tried many roms after that, nothing could help.
I have a Ulefone Armor 9, and I did the same mistake, I have searched everywhere, but found nothing, I tried to re-flash the stock ROM, and still this red water mark showing up on the right corner of the screen.
I hope someone could help us on this.
I'v got the global Note 9s Curtana and after getting the V11.0.9.0 i had an issue with the wifi, the device it self turns off the switch again and again. I have to tell you it's my first time with MIUI and i'm not a specialist of that, so after some trying to get a result i made my phone brick.
Now there is a red triangle on my screen with the "!" inside and in the bottom line says " The system has been destroyed".
I tryed to flash a ROM with MiFlash Tool but allways get an error.
I got a unlocked bootloader and i can reboot into fastboot.
Do anybody know a solution to help me?
johnsot said:
I'v got the global Note 9s Curtana and after getting the V11.0.9.0 i had an issue with the wifi, the device it self turns off the switch again and again. I have to tell you it's my first time with MIUI and i'm not a specialist of that, so after some trying to get a result i made my phone brick.
Now there is a red triangle on my screen with the "!" inside and in the bottom line says " The system has been destroyed".
I tryed to flash a ROM with MiFlash Tool but allways get an error.
I got a unlocked bootloader and i can reboot into fastboot.
Do anybody know a solution to help me?
Click to expand...
Click to collapse
What error did you get, perhaps drivers or windows 10 PC, try with a windows 7 if you have one
Sent from my U65GT using Tapatalk
try to rollback to 11.0.8 and in miflash dont use option to clean with bootloader , you can see my post here
https://forum.xda-developers.com/redmi-note-9-pro/how-to/tutorial-how-to-revert-to-official-t4109831
My problem has been solved, I finally made it and i flashed one fastboot rom and my phone is live again. I was really scared when i saw the message for the destroyed system.
Thanks you quoted on my post.
Dear All,
It is different Thread then others, pls read carefully for better understanding.
Story Started from May 10th, 2020, My RN3 SD (OS Miui 10) has gone in EDL mode suddenly, I tried to recover back but it didn't get the boot in any other mode and was unable to flash any ROM. in MI Flash I tried everything nothing happened. I just gave up on it and after battery fully discharges I put it in charge .. it was booted up automatically and everything was working fine. first I thought it was an OS related issue so I installed Custom from but this issue is happening every day...... 3 days ago same thing happen I tried to install firmware via MI Flash , it was detected but unable to flash .. receiving error Send NOP Command. i tried test point method and all tutorials which were mentioned in XDA or any other community but still having same issue....
Hello Guys,
Had a problem with my phone - non of stock firmware installation work. System could not boot.
Probably last chance in EDL installation, but it requires authantication - does anyone have a solution for that, or any other method that helps?
regards
Can you plz elaborate , what happened to your device ..what is the current status....is it completely un responsive or bootes to recovery or fastboot...any error msg..........?
Hello,
My Redmi note 5 just suddenly bricked just like that when using it. It got stucked at mi logo.
My bootloader is locked.
I tried different methods online to make it alive but its just not working.
I tried anti_test with mi flash tool but always get different types of error.
I also tried with edl mode but it did not work.
Can someone please hellp me with anything
umanga.907 said:
Hello,
My Redmi note 5 just suddenly bricked just like that when using it. It got stucked at mi logo.
My bootloader is locked.
I tried different methods online to make it alive but its just not working.
I tried anti_test with mi flash tool but always get different types of error.
I also tried with edl mode but it did not work.
Can someone please hellp me with anything
Click to expand...
Click to collapse
Like this you made? A little bit more search. More ideas I don't have. Maybe you have to buy a new phone.
How to restore bricked Redmi 5 Plus and fix bootloop - Xiaomi Firmware
In this post we are going to show you a few different methods on how to unbrick and restore Xiaomi Redmi 5 Plus (or how to restore “persist” partition). Advertisement The second part of this article will be generally about Redmi 5 Plus bootloop issue and how to fix it. Tutorial on how to fix...
xiaomifirmware.com