My oppo a5s is hard bricked because I flashed a twrp image using root essentials on my rooted oppo a5s containing mediatek mt6765 chipset. It is not turning on after i rebooted it and no response when plugged to charge.It gives me brom error 0xc6000005 errors on flashing with sp tool and i dont have a perfect scatter file for this device.I have dump rom files downloaded from internet but i dont know how to write it to phone, i also downloaded official firmware which contain .ofp file and a download tool with require oppo official login.I think i hard bricked it and i think i corrupted the preloader and i am too tensed and helpless untill i remembered about my favorite forum xda, you are my last hope .i also used a miraclebox crack v2.89 in pc and its latest version is only supporting my phone giving me error boot not found or bad cpu, i also used msm dowload tool downloaded from youtube and it is not recognising the device as a com port. please help me in this time of corona virus as this phone is only method of contacting anyone in case of an emergency situation.please contact me in email at [email protected] or reply to this post quickly
i am very freaked out and i needs help !!!
Have u fixed it yet?
u fixed it yet? i hard bricked my a5s too
Related
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Hello
Today I tried to update my phone OT-4033X with Custom ROM, but the process did not work and he stock in logo boot
i tried the flash it with backup i already take with MTK Droid Tools
after i did format from SP flash tool like tuto in net
and i go for Download but the process does not succeed and give me "s_not_enough_storage_space (1011)" in SP flash Tool
I tried with several copy
SP-Flash-Tool-v3.1344.0.212
SP_Flash_Tool_v3.1316.0.150
SP_Flash_Tool_v5.1348.00
and alcatel Mobile Upgrade S does not recognize the phone
any solutions pls
and sorry for my bad english
Have you fix that BROM ERROR? I'm having the same problem too. :crying::crying::crying:
Hi,
I had the same issue with mine 4033x. I managed to fix it by fallowing the instructions on this site:
http://www.thefirmwarehub.com/alcatel-pop-c3-stock-rom/
but instead of the included scatter file (MT6572_Android_scatter) use the one attached to this post.
I hope this will help.
Regards.
Hi Guys
i have bricked my Vodafone VF685/ Alcatel Pop D1/ Huawei U1860 or whatever make this is (quite confusing) with SP Flash tool MT6572.
I tried to flash CWM recovery (successfully rooted with KingRoot) with the Scatter file compatible with the SP Tool version. All went well, bur my phone didnt want to go past the start up logo. So i tried flashing it again, and now it doesnt want to switch on nor charge, cant boot into recovery. Just a dead phone with a black screen. My pc doesnt pick up my phone via usb and i get error code 4004, i did some searching on how to fix the error code but im still stuck in a rut...
Any advice on how to fix this and please any advice on how to tell which recovery and scatter and firmware is for this phone?
Model: V685-1
SVN: 120HJG1
MANF: TCT MOBILE LTD
CU REF: V685-2AVDZA1
Thank you in advance, i really appreciate your help and advice.
Johan
Well, this is quite dissappointing... Not a yes or a no... Nothing....
Code:
**** DISCLAIMER ****
This post is an EXPERT-LEVEL Post.
I am NOT RESPONSIBLE for what you do to your device.
Please not that I am still working on a solution to this brick.
Hello XDA-Developers,
I recently got my hands on a Meizu M3 note and, of course, wanted the newest - nougat - firmware on it. It seems I accidently flashed a incompatible (or currupted) Update (flashed an A Firmware on a G version phone). Sadly it broke down and showed only vertical stripes on it's display.
Image here: https://ibb.co/cpGunm
After some hours research I found some information on how to reflash the M3 note via SP Flash Tool here and here. Since the first tutorial is for the M3 and M3s and the second tutorial is for the M model of the device (I've got the L model) there are some changes needed for it to somehow magically work.
I exchanged files provided (such as preloader.bin, lk.bin etc) with the matching ones from the latest Official Global Firmware from Meizu. Just extracted them out of the update.zip. (Don't forget to select the Authentication File!)
Image here: https://ibb.co/k3zYDR
Short flashing tutorial: make sure your device is turned off and disconneced then click "Download" and connect your device via USB. Don't worry if it now shows an error like "Download DA Failed", just dismiss the error and click "Download" again. It should flash the device now.
Sadly it is not possible to flash the boot.img provided in the latest official update.zip from Meizu (you'll get an security mismatch error). BUT the boot-verified.img provided by the chinese archive is flashable and is accepted by the device. The device is now in a bootloop, fastboot is accessible via holding Vol - and Power, but no recovery access via Vol+ and Power
The files seem to be repaired now but the display still shows these stripes - I think the firmware actually fried something on the display chipset. I bought a replacement screen and then will update this thread as soon as possible. If you have any Ideas of how to unbrick the device feel free to discuss.
Update 18.11.2017
Thanks to @ncristian !
I did as he suggested, downloaded and flashed the files from the russian forum here (if you do not speak russian and want to get straight to the point: Direct Download Link)
I still have the stripes on my screen but the device booted up successfully and got recognized again by my computer! While booting up I could see the stripes changing their color slightly as the bootanimation of flyme was playing. I guess I will have to replace the screen to make the display error go away... I will update this post as soon as I did so
Update 10.11.2018
Sadly I never actually exchanged the screen, I'm running a Pro 7 Plus as a daily driver now and I'm loving it
Update 19.05.2019
I have attached the boot-verified.img as someone requested it
I had the same problem and I solved thanks to this: https://4pda.ru/forum/index.php?showtopic=739028&st=24480#entry65580668 and Google Translate; I downloaded the .zip, installed drivers, launched the flash tool and flashed files contained in the folder L691H (Remember to install drivers and disable antivirus or it will not work). Then I downloaded FlyMe 6.1.0.0G, went into recovery with vol up + power, copied the update.zip into the device "Recovery" and flashed it; the only problem I had is that the phone charged but he didn't recognize the battery level; by reflashing the files contained in the 4pda .zip, the battery level went up (obviously, after leaving the phone charging for about an hour).
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Rajdas26 said:
Someone please help my meizu m3 note bricked after flashing flyme 7.8 beta.
Click to expand...
Click to collapse
Try reflashing via the original recovery, that might be your easiest solution. If that doesn't work you might try your luck with something like SP flash tool
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
shawn_mendes said:
Hey. Uhmm i know it's an olld post but i'm hopeless now. I need the boot-verified img you have. i can't find it anywhere. can you send it to my gmail ?? [email protected]
Click to expand...
Click to collapse
I have attached the file to the first post. Good thing I never delete anything :angel:
m3shat said:
I have attached the file to the first post. Good thing I never delete anything :angel:
Click to expand...
Click to collapse
First of all, thank you mate I successfully downloaded the boot verified. But still it didn't turned on. Just no power but recognized by the sp tool. I'm starting to think that downloaded again the wrong firmware. I also found out that their are two main board(or whatever is that). So this global firmware can be flashed in the both L and M series. I'm wondering what firmware you used to flash. Again, thank you in advance ^_^
l got same problem .. (because I'm not read careful )l tired to flash using many firmware or using boot verified .. i tired that for 2 Days.. So l give up.. take my device to profesional service . and solved. solved with Emmc repair ..
my device is L681H.
i accidentaly flashed my leagoo z6 with the wrong wrong firmware and hard bricked it using sp tool i was able to recover it but i lost my nvram and nvdata files since i had not bucked it up av been tryng to recover from this but i am stuck since the phone cannot get rooted and cannot install twrp. it is becoming more deficult to solve the problem without root permission which i have tried to place through many way but failed. i have tried to use adb sn write tool imei generators mtk engineering tool to no success. every time am using my pc i keep getting errors with preloader drivers which i have changed severaly to o avail my phone keeps disconnecting with pc hence i cannot work with it can any one give me a link on where i can download nvram and nvdata files or how to make one or help me wit there backup so that i can flash them back wth sp tool which seams to be the only thing working with my phone phone is leagoo z6 mtk6580