[Sound Mod] Dolby, Viper4Android [10.0 MIUI 11.0.1 / 12.0.3 STOCK ] (Stable) - Xiaomi Mi 8 Lite Themes, Apps, and Mods

Hello everyone
If you got update to Android 10 (11.0.1) Respective (MIUI 12.0.3) and you want to get the Dolby and the Viper4android and make them work together just fallow the steps.
"(!) THIS MOD WORKS ONLY WITH ANDROID 10 STOCK ROM. (NO CUSTOM ROMS(!) "
Android 9 MIUI 11.0.8 :
(!) Dolby was not tested in MIUI 11.0.8 ANDROID 9, Test it at your own risk. Using the same installation steps but using Dolby for Android PIE! You can find it at the forums, no more support for Android 9 since i got update to Android 10.
(!) Viper4Android works and tested with MIUI 11.0.8 ANDROID 9 with the same installation steps.
-----------------------------------
A loot of patience is required of course
(!) If you don't fallow all the steps don't judge me if the mods won't work or if your phone fails to boot (!)
You need to be rooted using Magisk Manager latest version.
Code:
I am not responsible for bricked devices, dead SD cards,
thermonuclear war, or you getting fired because the alarm app failed. Please
backup your data before flashing it!
YOU are choosing to make these modifications, and if
you don't fallow all the steps don't judge me!
Do everything at your own risk!
----------------
The things we need :
*Miui 11.0.1 / Miui 12.0.3
You can download the entire rom / update your rom from here :
https://xiaomifirmwareupdater.com/archive/firmware/platina/
stable V11.0.1.0.QDTMIXM 10.0 Global
or
stable V12.0.3.0.QDTMIXM 10.0 Global
I recommend to flash all the mods / recovery Roms using PitchBlack Recovery
You can download it from here :
https://forum.xda-developers.com/mi...covery-mi-8-lite-v2-9-0-base-twrp-v3-t4000857
Don't try with other Twrp like Orange Fox Recovery. It won't work and you will get boot loop (orangefox recovery does not have encryption features and does not have Ota update full support (disable/enable protection so you will get bootloop due to security reasons. )
-------------
You need to be rooted with Magisk Manager if you want to use that mods! Otherwise they will not work ever!
INFO:
If you got boot loop after flashing Magisk with TWRP(Phone stuck at boot process up to 2-3minutes ) boot twrp and format your DATA. DON'T WIPE! FORMAT!
**WIPE/FORMAT DATA**
*Restart your phone and be patient the boot may take some time after perform data format*
Now you should have the Magisk installed! (The data format does not wipe Magisk Manager from the system (!). It will be there.)
-------------
(!) If something goes wrong you can flash again the stock rom downloaded and repeat the process (!)
------------------
Don't use TWRP to flash any files from attachaments. Read carefully the tutorial!
------------------
Viper4Android / Dolby how to install (!)
----------------
VIPER4ANDROID
After the phone hase been rooted and the Magisk works fine (you have root)
Download the V4A version : 2.7.1.6 (You can find the rar arhive in attachments / extract it to your phone and install the apk / dont flash, only install the inside apk)
***ONLY THIS VERSION OF V4A IS WORKING WITHOUT ANY PROBLEM // IF YOU WANT THE NEW VERSION OF THE VIPER4ANDROID YOU WILL NEED SOME MORE STUFFS LIKE Se Linux Permisive / Audio modification library***
Go open the V4A application and install the driver (your phone will reboot automatically)
After reboot done the V4A should work.
- - - - - - - - - - - - - - -
DOLBY INSTALL :
Download the Dolby. Zip for Android 10 (Files in attachments!!! /// Dont try other version, it will crash!)
Flash it using Magisk and reboot your phone.
Now the Dolby should work together with the V4A
PLEASE READ!!!!
If you do all the steps and Dolby app closes and it doesnt work, you will need to uninstall the mod from magisk manager, restart phone, and flash audio modification library! Restart your phone flash again Dolby, and again restart your phone!
If not work after that, uninstall Dolby again from Magisk modules! Don't restart your phone yet. Flash Se Linux module module via Magisk and set it to permissive!
Then restart your phone, install Dolby again and reboot phone again!
The mod works with some phones without installing any audio modification patch. But in some cases you need that patches.
Now all the thinks should work! If not.. The latest think you should do :
Go to system /etc and copy audio_effects.conf and ds1-default..mlpaste it to system/vendor/etc!
I don't need audio modification library / se Linux permisive but i found some stock Roms with the same phone, who needs these paths to make Dolby work!
!!*Viper4android driver should not be affected after those modifications*!! If you got problem with viper after these modifications just reinstall the driver!
So we got V4A + Dolby + Stock equalizer full working all together(!)
Issues :
Dolby :
When you open the Dolby if you will set something it will close the application ( when you turn on / off the aplication / the surround..
The app Will close but the Dolby will work normally!!! You can change the eq settings in dolby without any issue.
When the Dolby app closes it won't affect the audio effect from Dolby. It won't stop working. You can open again the application and set more things!
----------------------------------
(!) Mod works with Speaker / headpones / Bluetooth / Calls(!)
No Audio path required
No audio modification library required !
The mod works fine with all Se Linux modes!
-----------------
(!) See attachments please
If you have any kind of problem leave a comment and I will help you!
Email : [email protected]
-----------------------
If you want to boost your phone speaker / headpones check the fallowing thread :
https://forum.xda-developers.com/mi-8-Lite/themes/increase-speaker-headpones-volume-stable-t4070111
--------------------
©ROM Firmware Required: Stable 10.0 MIUI 11.0.1 GLOBAL FIRMWARE / Stable 10.0 MIUI V12.0.3 GLOBAL
©Other ROMS : (!) Tested Pixel ROM Plus (not working) Not other Roms have been tested! Test it at your own risk.
©Mods Information
Status: Stable
©Created 2020-03-29
©Last Updated 2020-11-25>Android 9 support / updated some info about Dolby crash issue fixes! / MIUI 12 Updates
©All rights reserved.

thanks. work on miui

Changelog / update:
*Added some info about the instalation after updating to MIUI 12.
*Added RAR arhive with the right V4A apk. (Attachaments)
>Please read carefull the tutorial<

Related

[ROMS][LS997] 6-23-17 Stockish + Goodies + MagiskV13 + TDMods

TEAM DEVDIGITEL PRESENTS ​LG V20 LS997 Sprint Stock-ish with Goodies​
DOWNLOADS,MODS & RECOMMENDATIONS
AT BOTTOM OF MAIN POST​
CHANGE-LOG IN POST #2​
HELP ME POST #3
Read Before posting Issues
JUST LOOK HERE 1ST!
You've been Warned​
PREQUISITS:
This is a DECRYPTED rom and requires that you are boot-loader unlocked and have access to twrp.
If you have not wiped your system and formatted data do so now, unless you want a brick...
After flashing the rom i suggest wiping cache and dalvik cache again then rebooting.
YOU NEED TO WIPE ALL DATA AND FORMAT DATA TO USE MY ROM
This is based of the ZV3 / ZV4 / ZV5 / ZV6 / ZV7 Images currently. Oct, Nov and Dec,Jan, May patched software's.
See here for the Dirty Santa root and where you gotta hit thanks at for his hard A$$ work
XDA LINK : https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
OK THE DISCLAIMER PART:
I can't be held responsible for the effects of this software, it was designed for testing purposes and fun.
Please make a backup, make sure you have a computer handy with adb and fastboot.
Please take sometime to read all documents before proceeding, you've been warned.
Installation Steps:
1.) Download desired Rom Version from below download link(s)
2.) Place Rom preferably on external SD card
3.) Reboot device into recovery either using Busybox, shell command, or from device powered off method. (instructions in post#3)
4.) Once in recovery its HIGHLY recommended to install on a clean device. Select Wipe, Then advanced,
put check marks next to System, Dalvik-Cache, Data, Cache
5.) Once wipe is completed, back up one step and choose FORMAT DATA, it will require you to type YES to complete.
6.) When completed return back to Main TWRP screen, Click Mount and make sure System and Data are mounted.
7.) Choose Install then Navigate to where you placed Rom ( You made need to choose SD as the storage location if you put on SD )
9.) Install Rom and wait for it to complete. Once done, select reboot and WAIT.
10.) Once on home screen you will need to manually activate your device, either go and do a Profile update in settings, or dial ##update#
This will need to be done anytime you flash a ROM as the activation information gets bypassed on my roms and most importantly ENJOY !
NOTICE:The install process will take some time (Approx 15 Min), later builds have zip-align at boot to help with de-odexed speeds, the boot logos have also been turned of on some newer builds so don't freak out, just wait until you hear the Voice assistant start her speech.
At this point the screen will be out of wack( ZV7 This is Fixed) , many moving colors and such, this is normal due to using sprints boot.img with the debug boot-loader that gave us the unlocked / root ability. Once you hear the Voice assistant start up, cover the proximity sensor near the front camera and lock the screen. Once both the top and main screen go black, just unlock the screen and continue with setup. The static image will re-occur on any full re-boot. To avoid this check out the Modified Kernels post for Alt. Kernels that resolve this. Be aware I do NOT support these other images, and i'm unable to help with issues you have if you choose that route. Please post in the Kernels page where you got the Kernel for best support!
DOWNLOADS
--------Software Version ZV7--------MAY SEC PATCH--------
( Magisk Manager 4.3.3 is for Official builds before Version 13;
Magisk Manager 5.0 Is for Beta Builds V13 and newer; both are attached to Change-log Post )
Version 9.0 D De-Odexed ( Magisk 13.xx + Debloated + Viper + Busybox + Tweaks + Mods etc)
Download (Beta-Magisk 13.xx): https://www.androidfilehost.com/?fid=673368273298966589
MD5: d52463b02ce7b90ddab63a6984209f6d
Version 9.0 C De-Odexed (Full Bloat, No Added Apps, Un-rooted)
Download: https://www.androidfilehost.com/?fid=817550096634781477
MD5: 827ae5e7f6b5ffc890e6653d6a16b1fb
Version 9.0 B Odexed ( Magisk 13.xx + Debloated + Viper + Busybox + Tweaks + Mods etc)
Download (Beta-Magisk 13.xx):https://www.androidfilehost.com/?fid=817550096634781064
MD5: e5e436a93e5491e4d555347390dbcdb1
Version 9.0 A (Rooted) Odexed (Full Bloat, No Added Apps, Rooted W/ Magisk 13.xx +BB )
Download: https://www.androidfilehost.com/?fid=961840155545572409
MD5: 37b479e05962b96a04f8c999c60626f1
Version 9.0 A(Non-Rooted) Odexed (Full Bloat, No Added Apps, Un-rooted)
Download: https://www.androidfilehost.com/?fid=961840155545571944
MD5: 8faf5213f7a21b75bab18727628aa6ea
--------Software Version ZV6--------FEB SEC PATCH--------
( Make sure to D/L the Magisk Manager 4.3.3 Attached to Change-log Post )
Version 8.0 E De-Odexed ( Magisk 11.6 + SuperSU + Debloated + Viper + Busybox + Tweaks + Mods etc )
Download Link:https://www.androidfilehost.com/?fid=961840155545572383 [/I]
Version 8.0 D De-Odexed ( Magisk 11.6 + Debloated + Viper + Busybox + Tweaks + Mods etc )
Download Link: https://www.androidfilehost.com/?fid=673368273298951670
MD5 : 010ed860fa7713980d95b19d7ef15758
Version 8.0 C De-Odexed (Magisk 11.6 + Busybox Full Bloat, No Added Apps )
Download Link: https://www.androidfilehost.com/?fid=817550096634766377
MD5 : 679031216e491668e6515b2b80b0d091
Version 8.0 B Odexed ( Magisk 11.6 + Debloated + Viper + Busybox + Tweaks + Mods etc )
Download Link: https://www.androidfilehost.com/?fid=817550096634766376
MD5 : b254fb5d4f9ccb19f8a56ce2eeb98e35
Version 8.0 A Odexed (Magisk 11.6 + Busybox Full Bloat, No Added Apps )
Download Link: https://www.androidfilehost.com/?fid=745425885120728713
MD5 : a2c2eb5b08ea9e7a35197f59259b7b5a
--------Software Version ZV5--------DEC SEC PATCH------
Version 7.5C Magisk V11.5 + 3Minit + ModControl+ModInstaller
( Make sure to D/L the Magisk Manager 4.3.3 Attached to Change-log Post )
MagiskSU Download Link: https://www.androidfilehost.com/?fid=817550096634756180
SuperSU Download Link: https://www.androidfilehost.com/?fid=457095661767149785
Version 7.0 MagiskSU + 3Minit + ModControl
( Make sure to D/L the Magisk Manager 4.3.3 Attached to Change-log Post )
Download Link: https://www.androidfilehost.com/?fid=745425885120713763
" To use Mod Control app, you must move it to /system/priv-app/ "
Version 6.5 (MAGISK V11.1) ZV5 Debloated, Deodexed, Crazy Build.prop, Init.d, BusyBox, Speedtweaks & More)
BASE OPTION 1 : MagiskSU Download Link: https://www.androidfilehost.com/?fid=673368273298930272
BASE OPTION 2 : SuperSu Download Link: https://www.androidfilehost.com/?fid=673368273298930271
Version 5.5 L (ZV5 Deodexed Debloat Medium Crazy Build.prop Init.d tweaks, battery and speed modded, su, bb, init-d, su.d)
Download Link: https://www.androidfilehost.com/?fid=529152257862698451
Version 5.0 K (ZV5 Deodexed Stock ZV5, No Bloat Removed/ BB,SU,,Build.prop only)
Download Link: https://www.androidfilehost.com/?fid=529152257862696925
Version 5.0 J (ZV5 Deodexed Debloat Medium Crazy Build.prop Init.d tweaks, battery and speed modded, viper, su, bb, init-d, su.d )
Download Link: https://www.androidfilehost.com/?fid=385035244224414280
Version 4.0 II (ZV5 Odexed Debloat Medium Crazy Build.prop Init.d tweaks, battery and speed modded)
Download Link: https://www.androidfilehost.com/?fid=673368273298924951
Version 4.0i ( ZV5 Odexed FULLBLOAT, Su, Root Switch and Viper only mods.
Download Link: https://www.androidfilehost.com/?fid=385035244224412300
Version 4.0HHH (ZV5 Odexed Debloated V3 Mods Moved to New Base)
Download Link: https://www.androidfilehost.com/?fid=745425885120699739
Base ZV5 Untouched - Not rooted
Download Link: https://www.androidfilehost.com/?fid=457095661767148407
-------Software Version ZV3--------OCT SEC PATCH-------
"Older Builds No longer supported"
Version 3.0F (ZV3 Deodexed/Debloated/INIT.D,BB,Speed,Viper,Mods)
Download Link: https://www.androidfilehost.com/?fid=457095661767128014
Version 2.0E (ZV3 ODEX/ROOTED/Debloated/INIT.D/BB/FM/Speed/Viper)
Download Link: https://www.androidfilehost.com/?fid=385035244224410664
Version 1.0D (ZV3 ODEX/ROOTED/Debloated)
Download Link: https://www.androidfilehost.com/?fid=385035244224410155
Version 1.0A (ZV3 ODEX/UNROOTED/Factory/NotTouched)
Download Link: https://www.androidfilehost.com/?fid=673368273298921373
------------------------------------------------------------------------------------
Twrp Recovery Project
XDA Link: https://forum.xda-developers.com/v20/development/recovery-twrp-3-1-0-0-touch-recovery-t3603760
Kernel/Boot.img Repo
XDA Link: https://forum.xda-developers.com/v2...-s-carrier-t3533426/post70430173#post70430173
Radio/Modem/Baseband Repo
XDA Link: https://forum.xda-developers.com/showpost.php?p=70430236&postcount=2
Mod Control By @Zacharee1
XDA Link: https://forum.xda-developers.com/v20/themes/mod-aosp-signal-bars-t3551350​
MODS / FEATURES & Extras For DevDigitel Roms ​
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*
Open Gapps Project :
Link:http://opengapps.org/
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*
Custom SystemUI Mods / Mod Control:
XDA Link:
https://forum.xda-developers.com/v20/themes/mod-aosp-signal-bars-t3551350
Playstore Link: https://play.google.com/store/apps/details?id=com.zacharee1.modcontrol
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
DualBoot Patcher (SnapShot)
XDA Link: https://forum.xda-developers.com/showthread.php?t=2447534
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
3Minit Clock & Battery
3Minit Battery: https://forum.xda-developers.com/sho....php?t=2799958
3Minit Clock: https://forum.xda-developers.com/and...-v1-0-t3400221
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Viper4Arise:
XDA Link : https://forum.xda-developers.com/android/software/r-s-e-sound-systems-auditory-research-t3379709
My Viper4Arise Magisk Flashable : https://forum.xda-developers.com/v20/themes/flashable-mod-viper4arise-magisk-simple-t3578075
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Magisk 11.6
XDA Link: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Dual Audio Mod (Earpeice + Speaker )
XDA Link : https://forum.xda-developers.com/v20/themes/stereo-speaker-mod-t3499521
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Updated Stereo mod with High Impedance forced on HiFi Dac.
Made for ZV7 update.
https://forum.xda-developers.com/sho....php?t=3637449
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Hotspot Mod
XDA Link: https://forum.xda-developers.com/v20/themes/rooted-enable-hotspot-t3523662
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Fluence UHD Patch
XDA Link: https://forum.xda-developers.com/android/software/fluence-uhd-t3571875
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Shortcut Master Lite
Playstore Link: https://play.google.com/store/apps/d...cutmaster.lite
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Make ANY Quick Setting Tile :
Play Store Link: https://play.google.com/store/apps/details?id=com.quinny898.app.customquicksettings
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Emoji Switcher:
(Aroma-Installer)
XDA Link: https://forum.xda-developers.com/v20/themes/aroma-1-click-emoji-changer-10-to-pick-t3499517
(Flashable Zips)
XDA Link: https://forum.xda-developers.com/v20/themes/flashable-release-outlined-ios-unicode-t3545726
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Enable Google Assitant:
XDA Link: https://forum.xda-developers.com/android/software/guide-how-to-enable-google-assistant-t3477879
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Google Phone & Contacts
XDA Link: https://forum.xda-developers.com/v20/themes/root-nougat-google-dialer-app-v20-t3526735
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
Silent Camera Mod
XDA Link: https://forum.xda-developers.com/v20/themes/root-roiddroidvoid-s-silent-lg-v20-t3530206
*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#*#
BUGS:
* Voided Warranty Via LG
* PASS SAFETY-NET WITH MAGISK ONLY ROMS ( NOT SUPERSU )
* Static on 1st boot ( FIXED ON ZV7) that requires proximity sensor hack ( Werewolf Kernel Fixes this but adds longer boot time)
Be aware alternative kernels will break things in my Rom, by changing your kernel I can no longer help troubleshoot your issues
as I am not the developer for the kernel you choose, my stock-kernels are included with the Rom and work perfectly minus static.
* SUHIDE BY CHAINFIRE NOT WORKING ON ANY DEC PATCH FORWARD
* Must Remove LG Setup Wizard to use the additional users, hangs on setup without removing, this also messes with call-ui somewhat, when in
a call you cant leave it normally, you must hit the 3 dots in right corner and choose contacts, then you can hit home and browse phone will in
call. Not sure why these 2 are connected here, but its the case anyways.
* Device may lose System/Carrier settings after flash, do ##update# or ##brand# and let device re-activate.
*Please do not Re-Host my work or Re-use my work without Proper credits,
as well as a link back here for support etc. Otherwise its opensource so do as you please*
Developer(s):
@Team DevDigitel
@me2151
Contributor(s) :
@Zacharee1 - SystemIi edits AOD, All the ModControl Stuff etc - Thanks Bro!
@SaintZ93 - Provided the tools / work to build the Stock boot.img's from LG source, patched the STATIC!
My GitHub : https://github.com/Team-DevDigitel/DevDigitel-V20.git
Built Using: Assayeds Kitchen & SuperRs Kitchen. Great Tools For Any DEV!
*Stable Status*
Special Thanks To:
This was only achievable due to @me2151 and his awesome Work.
@me2151 - LS997 / Booloader Unlock Dirty Santa / Boot.img / ZV3&5 Bases,Please make sure to visit the dirty Santa forum and put a thanks for him and donate to HIM if you can afford to.
As well as @jcadduono for the tools and tons of work with source he has done!
@Tilde88 - Files / Related Testing / Deodexing
@Chainfire - Root/Su and the CF.lumen app see here : https://forum.xda-developers.com/showthread.php?t=2711912
Magisk&Tools: @topjohnwu See: https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
As Well the Unofficial Magisk Devs : @Captain_Throwback, @Didgeridoohan and @DodoGTA @Deic See: https://forum.xda-developers.com/apps/magisk/unofficial-magisk-v10-beta-built-t3521901
Viper4Arise Team Thanks : @guitardedhero, @ahrion, @Ben Feutrill , @A.R.I.S.E. Sound Systems
JRummyApps for the great boot-animations app from google play. Found here : https://play.google.com/store/apps/details?id=com.jrummy.apps.boot.animations&hl=en
------------------------------------------------------------------------------​
CHANGE LOG:
VERSION 1.0 ( Labled D) ZV3
- Stock Odexed
- Debloated,
-Su &Su.d
-No Encypted
-Stock Lg apps re-loaded
-Cf.lumen adjuster,
-ton of edits, cleanup and more.
- All the stock features are included for sprint users
IE: PRL and Profile updates , HFA , WIFI CALLING, Comfort view, YouTube fixes etc.
Version 2.0 ( Labled E) ZV3
-Odexed
-Now includes Viper for Android
-Init- supported
-adb / su.d - supported
-Fm Radio - Fixed
-Speed Edits
-Build Prop Edits
-Update Script Rewrite
-Busy Box and all parts in xbin by default
-Deleted more bloat -still got some more to go
-Super compressed ( file size was consistent to last file even with more added )
-Zipaligned
Rooted with SuperSU / Not updated to latest but ill get it there next time around
more that im not thinking oF
Version 3 (Labled F) ZV3 ( Last Revsion to ZV3)
-Deodexed
-Updated SuperSU
-Updated build / Prop / System
-Cleaned up a little more
-Base is no DEODEXED
-minor tweaks/bug fixes
-super compression for size
- This will pass safetynet with attatched app. Install, give root
Permissions.. Check stop all superuser deamons. Reboot and enjoy!
Version 4 (Labled HHH) ZV5
-Odexed Base
-Viper4Android *bug fix
-Busybox implemented on flash now
-Su.d
-No setup-wizard included (straight to homescreen) must update profile to re-activate device.
-Stock Lightweight base
-Fast First Boot
-(mirrors all mods on version 3 minus deodexing)
-Root Switch Installed
-Cleanup
-New build.prop
-ZV5 Boot.img
-Faster running system then ZV3
Version 4 ( Labled i ) ZV5 Odexed Fully Stock (Base)
-Full ZV5
-Odexed
-GoogleNow
- Viper
- Build.prop edits
- GoogleNow
- Multi-User
- Cf Lumen (included in system)
- SuperSu "Chainfire Version"
- BusyBox,
- Build.prop
- Init-d and many tweaks being used
- Su.d,
- Sqlite
- RootSwitch - 1.3.3.2 (included in system)
-Viper4Android
Version 4 ( Labled II ) ZV5 Odexed Medium Debloat
-Odexed Base
- Viper
- Build.prop edits
- GoogleNow
- Multi-User
- Cf Lumen (included in system)
- SuperSu "Chainfire Version"
- BusyBox,
- Build.prop
- Init-d and many tweaks being used
- Su.d,
- Sqlite
- RootSwitch - 1.3.3.2 (included in system)
Version 5 ( Labled J ) ZV5 De-odexed Medium Debloat
- Now Deodexed
- Deodexed
- Minimal SetupWizard Used Vs No setup Wizard
- Viper
- Build.prop edits
- GoogleNow
- Multi-User
- Cf Lumen (included in system)
- SuperSu "Chainfire Version"
- BusyBox,
- Build.prop
- Init-d and many tweaks being used
- Su.d,
- Sqlite
- RootSwitch - 1.3.3.2 (included in system)
- Clean Install recommended due to removal of .odex systemwide
- 1st boot is long, be patient, its running my zip-align on 1st boot and optimizing all the new apks, it will sit on lg logo longer then usual, just wait!
Version 5 ( Labled k ) ZV5 De-odexed No Removal of Bloat (mirrors I)
- Fully Stock
- Deodexed
- GoogleNow
- Build.Prop
- Su, Su.d, Init-d, Busybox included.
- Multi-User
- Clean Install recommended due to removal of .odex systemwide
- 1st boot is long, be patient, its running my zip-align on 1st boot and optimizing all the new apks, it will sit on lg logo longer then usual, just wait!
Version 5.5 ( Labled L ) ZV5 De-odexed Medium Debloat
- Deodexed
- Debloated, 99% of google apps/unessential Lg apps gone
- Added All LG apps back, even ones never included on V20
- Minimal Setup-Wizard Used Vs No setup Wizard
- Build.prop edits
- Deodexed
- GoogleNow
- Multi-User
- Cf Lumen (included in system)
- SuperSu "Chainfire Version"
- BusyBox,
- Build.prop
- Init-d and many tweaks being used
- Su.d,
- Sqlite
- RootSwitch - 1.3.3.2 (included in system)
- Clean Install recommended From versions Prior to ( J ) or any non-deodex version
Version 6.5 ( Magisk Rom ) ZV5 De-odexed Medium Debloat
- Fully Re-wrote installer process, had to make order changes, added DATA install vs system install of additional apps
- Two (2) Versions PHH or SuperSu, PHH is built into Magisk Manager
- PHH Magisk/Root hide works without error & passes safetynet, SuperSu doesn't pass safetynet still
- Debloated, 99% of google apps/unessential Lg apps gone
- Added All LG apps back, even ones never included on V20
- Magisk Manager V11.1
- Minimal Setup-Wizard Used Vs No setup Wizard
- Build.prop edits
- Multi-User
- Deodexed
- GoogleNow
- Cf Lumen ( Now a user-app that can be easily removed)
- BusyBox & Magisk Systemless BB
- Init-d,
- Su.d ( Now located in Magisk Directory by default)
- Sqlite
- RootSwitch - Removed from all Magisk builds as its not needed
- Clean Install recommended From versions Prior to ( J ) or any non-deodex version
- 1st boot is long, be patient, its running my zip-align on 1st boot and optimizing all the new apks, it will sit on lg logo longer then usual, just wait!
Version 7.0 MagiskSU + 3Minit + ModControl+ModInstaller+ViperAddons
*Magisk will need to be installed from Playstore to avoid bugs
* Added Viper4Arise Profiles, DDC, Kernel - Now you just need to install the driver Via Magisk and it will be pre-setup and working with a good base.
*Updated ModControl and ModInstaller was added to google play versions,
the mod control should be moved to system/app using the mod installer
*Added updated 3minit resources, systemui, quicktools, sbsignuture etc.
Version 7.5B/C MagiskSU + 3Minit + ModControl
Clean or Dirty Flash OK!
If error code 7 occurs, unmout system and data and re-flash.
Mod Control By @Zacharee1
XDA Link: https://forum.xda-developers.com/v20...-bars-t3551350
-Introduction of ModControl:
This is a new app being built directly for the V20! This is going to be the epicenter for mod adjustments that have just been made. Mod control can actually revert EVERYTHING that has been done to the ui! This can give the user complete control over the design aspect of their device without having to flash diffrent mods and reboot constatly. This app contails a ton of options and everything is sperated from eachother to provide the most custom experience ever on our V20 handsets! You must manually move the app from userapp to system app " /system/priv-app to be exact. As well as you need to give the app permission to modify storage as it replaces files on the fly to accomplish the changes.
This app is being funded by TeamDev to get into the playstore, this is purely to provide more convienece and allow the app to OTA update as we continue to tweak and modify the app. There will be 0 adverts placed in modcontrol and will be free for life. I have tagged the creator in main op multiple times so you guys can go over there and read up on the app, its progress, post feedback, as well as make REQUESTS!!! This is a awomse feature i'm proud to be a part of and hope you guys share the enjoyment here! This is also where the updated app apks are being posted for the time being until the app is approved by google! You may see a donate option appear in the app over time, please consider donations to the project but by all means do not feel obligated. The donations would be diretly to the modcontrol creator and are purely to help motivate him and cover is coffee and costs/time!
-3minit Battery & 3minit clock added to SystemUI
3minit battery has 10000's of battery icons to choose from, as well as the option to remove the battery completely.
-3minit clock can be adjusted in many ways:
center,left,right as well as 1000's of combos for time,date etc.
- Added "Userdata" to install the following apps.
*Viper4Arise (Requires The magisk module installed to work)
*MagiskManager
*ModControl - Now a system app in V7.5B or later
* Viper profiles now added to userdata
3minit will function without this app but this is the heart of the main mods!
*CF Lumen
- Re-wrote updater script to now wipe batterystats on flash, as well to re-mount, and redo busybox install. "userdata" now being installed for additional apps vs "system"
-Added inid.d into boot.img as well as Magisk retains init.d mods for systemless. Done to avoid some init.d scripts from being skipped.
-Added fully busybox run parts to system, sqlite, and a few others. This way all flashable zips should be functional with our device, regardless if magisk busybox's systemless interface works.
-Many other tweaks that i probably forgot but will add as i see fit
ZV6 Builds
Version 8.0 A Odexed (Magisk 11.6 + Busybox Full Bloat, No Added Apps )
Placeholder
Version 8.0 B Odexed ( Magisk 11.6 + Debloated + Viper + Busybox + Tweaks + Mods etc )
Placeholder
Version 8.0 C De-Odexed (Magisk 11.6 + Busybox Full Bloat, No Added Apps )
Placeholder
Version 8.0 D De-Odexed ( Magisk 11.6 + Debloated + Viper + Busybox + Tweaks + Mods etc )
Placeholder
Version 8.0 E De-Odexed ( Magisk 11.6 + SuperSU + Debloated + Viper + Busybox + Tweaks + Mods etc )
Placeholder
ZV7 Builds
Version 9.0 A Odexed ( Full Bloat, No Added Apps, Un-rooted )
Placeholder
Version 9.0 B Odexed ( Magisk 13 + Debloated + Viper + Busybox + Tweaks + Mods etc )
Placeholder
Version 9.0 C De-Odexed (Full Bloat, No Added Apps, Un-Rooted )
Placeholder
Version 9.0 D De-Odexed ( Magisk 13 + Debloated + Viper + Busybox + Tweaks + Mods etc )
Placeholder
HELP ME PLEASE FOR ISSUES AND FIXES!​
PLEASE READ THESE BELOW BEFORE POSTING WITH A ISSUE, EXPECIALLY TO DIRTY SANTA ETC!!
YOU WILL BE IGNORED IF ON THE LIST!!!​​
==================================
I Flashed Magisk But No Root?
=====================================
Two ways to approach this one:
Re-flash the whole Rom without wiping. Reboot.
-OR-
Pull the Magisk11.zip from inside the rom under the
/Magisk/Magisk11.zip directory, and flash it by itself and Reboot.
==================================
How do I get into recovery
=====================================
pull battery and put it back in
hold volume down and power.
when lg logo shows up click power and re hold it while still holding vol down.
if you do it right in about 4 seconds or so it will boot to a menu, choose yes both times and you'll be back in TWRP.
====================================
Stuck in a endless boot loop to twrp
=======================================
1.)Do it from twrp:
Make sure system and data are mounted with Twrp.
We need to clear out some directories causing issues. Once mounted partitions are verified go to advanced and use the file explorer buit into TWRP.
We need to delete the entire "Fota" and "Misc"
locations.
They are located under these locations
Don't worry if they aren't all there.
Delete any/all of these:
/fota
/misc
/data/fota
/cache/fota
/data/misc
/etc/fota
/system/etc/fota
Then reboot from TWRP. This should fix the issue.
Or
2.)Requires Pc and Fastboot setup already.
Pull battery and put back in, hold vol down and pulg into pc
phone will boot to Fastboot*
Now on pc send these commands via command prompt
Fastboot erase misc
Fastboot erase fota
Fastboot erase cache
Fastboot reboot
still stuck? go back to fastboot as stated above
Try this as well
fastboot erase system
unplug and pull battery and put it back in,
dont plug back in, lets try to get into recovery,
hold volume down and power.
when lg logo shows up click power and re hold it while still holding vol down.
if you do it right in about 4 seconds or so it will boot to a menu, choose yes both times and you'll be back in twrp.
restore backup or re-flash a rom again..
Good-Luck!
===================================
Locked out of device after restore / dirty flash
pin # / pattern / Fingerprint wont work?
=======================================
Steps:
Boot into Twrp ( if you dont know how see above steps on how to access twrp
Using the TWRP file manager navigate to this location
/data/system/locksettings.db
delete this file and reboot device, your pin/lock is now gone.
==============================
Some apps wont login or work
===================================
These may also quire the troublesome app to be uninstalled first/and re-installed after steps completed. This is semi generic.
Alternative 1:
Download this app from the playstore to
download the latest versions of google play services,
Link: https://play.google.com/store/apps/details?id=com.weberdo.apps.serviceinfo
Open app and use it to force a update
It gives you 3 options to do so
once done reboot into recovery and clear cache and dalvik-cache
this should resolve the issue once completed
Alternative 2:
Try fully un-rooting. This will require you go into the settings
and choose full unroot. When super su asks to replace with stock image,
say no. The phone will need to reboot after it has complete. Once rebooted
try to login to the application and see if it worked. If yes then get everything logged in and then pull the supersu zip from the rom (this will be in the rootzip folder) Take it and flash it using twrp. It will reboot atleast once. Do not disrupt the process!
Alternative 3:
Depending on build you now have the alternative option to switch to fully Magisk and the phh superuser app. This is still some uncharted territory with Magisk and what exactly it does to force hide root. In the Magisk manger app you can choose to hide root. This may be buggy but have the app downloaded and go to sign in after enabling this option. If this works you are more then likely fighting the battle with safetynet and its not something I currently have much support or full understanding of. Goodluck!
=====================================
Hostpot/Tether Settings Missing
Other SystemUI things gone
======================================
Its best to do this on wifi but do it as you wish
Steps:
go to dialer
enter ##27269# (##BRAND#)
Hit Yes if prompted to do so,
the phone will reboot and add the carrier branded files back
and replace the systemui setup with the correct one!
Other Codes that do the same thing essentially : ##UPDATE# ##72786#
These will not erase any user data, so dont be worried!
=====================================
Storage Showing 0mb in Twrp? Device cant wipe any data?
=======================================​
This may show error 150 in twrp when trying to wipe any data.
All of your data is gone either way, this will hopefully fix the device.
Steps: This requires twrp access still,
Go under wipe,
and choose Advanced wipe,
once there choose repair/change file system
after clicking repair file system you will now see all of your storage options here.
The storage will need to be wiped with the EXT4 Option.
You must only select 1 at a time, and they all must be wiped to resolve this issue.
Do each one down the list, and wipe every storage location 1 by 1. Once done,
back out and check to mount each partition. This show now be successful.
I would go ahead and flash a clean rom or go and restore from a backup.
*This can also fix issues with some sd cards being corrupted*
=====================================
Cant Get Service? No Calls or Text But LTE works?
=======================================
Try this:
How to manually program:
https://forum.xda-developers.com/v20/help/manual-program-sprint-ls997-v20-t3557676
How to write your prl:
https://forum.xda-developers.com/v20/how-to/how-to-write-prl-to-v20-t3559010
​
More to come......
I'll have to give it a few more minutes, but I appear to be stuck on the first boot. Was already dirtycow'd. Did a clean install of this rom. First boot, it got to LG screen rebooted, past LG screen into static, behind the static is mostly white with some yellow and black lettering (sprint logo) and it appears just frozen there. I'm aware first boot takes a while. It's been an abnormally long time without any change at all - 10 minutes and change or so. I'll give it a bit longer but I'm pretty sure it's froze up.
---------- Post added at 01:14 PM ---------- Previous post was at 01:09 PM ----------
Yeah pretty certain this isn't going anywhere. I would've been into the android optimizing apps progress bar screen well before now on first boot.
---------- Post added at 01:28 PM ---------- Previous post was at 01:14 PM ----------
Yep definitely stuck, left it almost half an hour. So, like I said, I was on dirtycow and the sprint rom from that thread (so I'd already formatted data, had TWRP & root obviously). I wiped cache, dalvik, system, and data. Installed rom. Wiped cache & dalvik again and rebooted. Looks like I have to figure out the button combo to get into recovery for this phone. I've just been using adb reboot recovery but adb is no longer able to see the device (I tested @Tilde88's attempt at a rom the other day and was able to access adb while frozen in a similar spot).
qstarin said:
I'll have to give it a few more minutes, but I appear to be stuck on the first boot. Was already dirtycow'd. Did a clean install of this rom. First boot, it got to LG screen rebooted, past LG screen into static, behind the static is mostly white with some yellow and black lettering (sprint logo) and it appears just frozen there. I'm aware first boot takes a while. It's been an abnormally long time without any change at all - 10 minutes and change or so. I'll give it a bit longer but I'm pretty sure it's froze up.
---------- Post added at 01:14 PM ---------- Previous post was at 01:09 PM ----------
Yeah pretty certain this isn't going anywhere. I would've been into the android optimizing apps progress bar screen well before now on first boot.
Click to expand...
Click to collapse
make sure to clean wipe and make sure you mounted system prior to flash. First boot does take some time, and will take 10-20 minutes to fully install and boot up. Be patient but if its on the sprint boot animation its on its way to fully boot from previous tests. Maybe wipe and re-install? I just wiped system fully with fast-boot and flashed again to double check things.
correct i did not add adb to the kernel because its skipps so fast you can never hit it on boot up, there is no hardware key combo to enter recovery,
pretty much if its stuck and wont boot, go to fastboot - fastboot erase system, then run step 3 from dirty santa and it will replace the boot.img and the recovery and allow adb again. Id wipe and try again with a clean flash, ive put it on 3 new devices so far and all 3 booted clean after about 15 min or so..
old
My bad, false alarm. I pulled the battery and gave it another shot at booting without doing anything else and sure enough I was at the initial setup screen in about 5 minutes.
Team DevDigitel said:
make sure to clean wipe and make sure you mounted system prior to flash. First boot does take some time, and will take 10-20 minutes to fully install and boot up.
Click to expand...
Click to collapse
Yep, clean wipe, sys was mounted, install script appeared to run without issue, waited more than 25 minutes. I have flashed and restored a handful or two of times so far on the v20 so I kind of had an idea what to expect (obv. every rom can be different, computers act weird, etc). Looked like it had frozen up but maybe it was just taking extra, extra long.
Team DevDigitel said:
correct i did not add adb to the kernel because its skipps so fast you can never hit it on boot up, there is no hardware key combo to enter recovery,
pretty much if its stuck and wont boot, go to fastboot - fastboot erase system, then run step 3 from dirty santa and it will replace the boot.img and the recovery and allow adb again. Id wipe and try again with a clean flash, ive put it on 3 new devices so far and all 3 booted clean after about 15 min or so..
Click to expand...
Click to collapse
Huh, I did not realize there's no hardware combo for recovery. I kept reading hold volume down and power and do a little dance at the right second but I tried a bunch of times and couldn't hit it. In some places I read that brings you to a choice to factory reset and you have to select and confirm and then it will boot into TWRP..
Thank you for that info on adb during boot (I was about to try fastboot before just giving it another shot at booting up), and the ROM of course (I've been F5'ing this subforum for the last 2 days waiting lol, also big thanks to @me2151 and @Tilde88).
qstarin said:
My bad, false alarm. I pulled the battery and gave it another shot at booting without doing anything else and sure enough I was at the initial setup screen in about 5 minutes.
Yep, clean wipe, sys was mounted, install script appeared to run without issue, waited more than 25 minutes. I have flashed and restored a handful or two of times so far on the v20 so I kind of had an idea what to expect (obv. every rom can be different, computers act weird, etc). Looked like it had frozen up but maybe it was just taking extra, extra long.
Huh, I did not realize there's no hardware combo for recovery. I kept reading hold volume down and power and do a little dance at the right second but I tried a bunch of times and couldn't hit it. In some places I read that brings you to a choice to factory reset and you have to select and confirm and then it will boot into TWRP..
Thank you for that info on adb during boot (I was about to try fastboot before just giving it another shot at booting up), and the ROM of course (I've been F5'ing this subforum for the last 2 days waiting lol, also big thanks to @me2151 and @Tilde88).
Click to expand...
Click to collapse
YEY, was starting to loose my high from getting it put on xda, glad you got it resolved. Hope you enjoy!
And yeah its been about 48 hours without sleep here, trying everything and anything to get the boot.img right and me5153 had one ready instantly lol! hes the real champ here, im just putting it together and making little tweaks, i wish i knew him in person wed be neck deep in some fun over the weekend for all his work~!
And so it starts
Says Esqueue, with a huge grin on his face.
So, can I just get this straight before I flash....
I'm currently running the 996 stock ROM on my Sprint ls997. In order for me to install, is it as simple as wipe Dalvik, System, Data, Cache then flash the zip?
Seems like a noob question but with talk of other boot images I got a little confused.
Just a heads up guys. I kinda got ZV5 going
Curious, how did you get Wifi calling working again? Did you have to make changes to the kernel or some system files - or was it working off the bat? Just wanting to see if it's possible to fix it for other variants, like the AT&T H910.
N1ghtr08d said:
So, can I just get this straight before I flash....
I'm currently running the 996 stock ROM on my Sprint ls997. In order for me to install, is it as simple as wipe Dalvik, System, Data, Cache then flash the zip?
Seems like a noob question but with talk of other boot images I got a little confused.
Click to expand...
Click to collapse
Yep, that simple. Thought I was stuck until I tried turning it off and back on again. It's working great so far.
Thank you sir
---------- Post added at 04:40 PM ---------- Previous post was at 04:40 PM ----------
Or ma'am..... I don't know who you are, lol. ?
oooh. I will try this shortly. Is FM working?
As far as the Wifi calling, Prl Profile, Sprint features, Comfortview,
This was related to the Boot.img or also called the kernel, This is a device specific item that each phone would need to be
fixed and edited to work with your device/carrier. Honestly i was stuck and @me2151 had figured a way to get it to work correctly.
I have not tested Fm tuner, please let us know if it works!
as far as install procedure, please wipe all, also run the format data also, this is critical coming from the us996 roms, it needs to be clean clean clean for the first boot, all additional updates can be dirty flashed but thats on you if it FC's and is buggy.
Ill be trying to work with the other Devs here to continue to bring updates as long as i physically have the LG V20, once its EOL and ive gotten the next device ill depreciate this rom or allow a long term member to maintain or close it as fit.
Im def excited tho, this was a long 48 hours of code.. Hotspot mod is in the works, trying to get a flashable update zip out here shortly for that, but if you go to Q&A their is way to mod it yourself to get hotspot going without my help.
heres his quoted text""" @pdaddy
Download Shortcut Master Lite.
https://play.google.com/store/apps/d...cutmaster.lite
Open, click 3 dots in top right.
Click Search.
Type "apn".
Scroll and look for: com.lge.hiddenmenu.ModemProtocol.Apn.Settings
Click on it and launch it.
On Sprint it will say Access Points.
Then it has Sprint LTE Internet.
Click it and scroll down to Apn type.
Add ,dun to the end of everything on that line. (Example: default,mms,supl,hipri,dun)
Click the 3 dots in the top right and click save.
fyi : i added a old old old busybox to system/xbin { this was a mistake } go ahead and file browse and remove it prior to installing busybox from playstore to system/xbin
The reason im putting this out here is the device will not boot into recovery using rebootrecovery.sh script. Its hitting the old busybox install and failing. sorry =)
Please see below a pm from a junior member. For those looking for the FM radio fix please follow link in thread. I will be adding these into version 2.
@asyncsrc Hi there,
I just wanted to say thank you so much for creating this thread. I attempted to reply to the thread, but i got a response saying my account is too new. Having said that, I can confirm that it works on my LS997 device (WiFi calling, Youtube, etc).
For the FM radio, I used TWRP and installed the package (https://forum.xda-developers.com/attachment.php?attachmentid=3964077&d=1481366148)
Sourced thread here: https://forum.xda-developers.com/v20/help/fm-radio-u996-t3507818
The radio starts up fine with my headphones plugged in, and I'm able to listen to some local stations.
Thanks again!
Team DevDigitel said:
I'm Proud to present a Rom for the LS997 SPRINT !
This was only achievable due to @me2151 and his awesome stock-ish sprint kernel.
Please make sure to visit the dirty Santa forum and put a thanks for him and donate to HIM if you can afford to.
This is based of the ZV3 / ZV4 Images. I'm working to get the info from the ZV5 image and add a update.
See here for the Dirty Santa root and where you gotta hit thanks at for his hard A$$ [email protected][email protected][email protected][email protected]
https://forum.xda-developers.com/v20/development/ls997vs995h910-dirtysanta-bootloader-t3519410
PREQUISITS:
This is a DECRYPTED rom and requires that you are bootloader unlocked and have access to twrp.
If you have not wiped your system and formated data do so now, unless you want a brick...
YOU NEED TO WIPE ALL DATA AND FORMAT DATA TO USE MY ROM
Ok and the disclaimer part : I can't be held responsible for the effects of this software, it was designed for testing purposes and fun only on my free time. Please make a backup, make sure you have a computer handy with adb and fastboot and take some time to read all documents before proceeding, you've been warned.
TEAM DEVDIGITEL PRESENTS -
VERSION 1.0 - Stock Odexed, Debloated, Su, Su.d, No Encypted, Stock Lg apps re-loaded
Cf.lumen adjuster, and a ton of edits, cleanup and more. This is just the first run, and has only a few test flashes done.
Its seems to be smooth and responsive. All the stock features are included for sprint users IE: PRL and Profile updates , HFA , WIFI CALLING, Comfort view, YouTube fixes etc.
After flashing the rom, the phone will boot up with a static multi color screen, wait until you hear the phone get to the home-screen, click the power button to lock screen, once its locked and black the upper screen should show up with static only, cover the camera/proximity sensor and wait a few seconds and unlock the screen. This will only happen if you re-boot the device, other-wise its good to go.
Version 1.0 ODEXED/ROOTED -
Download Link: https://www.androidfilehost.com/?fid=385035244224410155
------------------------------------------------------------------------------------
Developer : @Team DevDigitel
and also
Thanks To:
@me2151 - LS997 / Booloader Unlock / Su / Boot.img
@Tilde88 - Files / Related Testing
@Chainfire - Root and the CF.lumen app see here : https://forum.xda-developers.com/showthread.php?t=2711912
---------------------------------------------------------------------------------
Mods and Extras : Such as bring back stock apps, or add hotspot mod will be coming soon!
Click to expand...
Click to collapse
It is working however it booted up wanting an android update. How to I remove the update reminder and block it from checking.

Lineage os 15.1 ROM for Samsung J4+

The only lineage os work on J4+ is in android file host
By PHHUSSON :
https://androidfilehost.com/?fid=962187416754473248
------------------------------------------------------------------------------------
OPENGAPPS LINK :
http://downloads.codefi.re/jdcteam/javelinanddart/gapps/MindTheGapps-8.1.0-arm-20180808_153837.zip
##########################################
BE CAREFUL : DON'T INSTALL GAPPS AFTER INSTALL SYSTEM BECAUSE TWRP WILL TELL YOU NOT ENOUGH SPACE ERROR .(As I face with j415f)
Steps installing :
1- INSTALL system.img as any gsi rom .
2- INSTALL MAGISK 18.0 .
3- REBOOT system .
4- Open device .
5- Device will reboot suddenly .
Wait until it open again
6- CONNECT to internet .
7- ACTIVATE magisk .
8- REBOOT RECOVERY .
9- INSTALL GAPPS .
10- FORMAT DATA .
11- REBOOT SYSTEM .
CONGRATULATION .
ALL IS WORKING EXCEPT :
SIMCARD2
FMRADIO
this gsi is fast and stable but it have problems with audio on jack
kapmino269 said:
What does Jack Mean ?
if you said about headphone audio of most of apps ,it isn't clear .
No Audio bugs in Aosp v110
Click to expand...
Click to collapse
yes i mean headphone audio, is there any fix?
Duplicate thread -> https://forum.xda-developers.com/pr...evice-development/lineage-phh-treble-t3767690

[FIRMWARE] MIUI 10 ROM for Teclast T8 (upd)

Disclaimer: I am not responsible for anything bad that may occur with your device, but I will take all the credit you can give me if it works for you!
After some months of hard work I would like to present MIUI ROM for our device (Teclast T8)! It was ported by me from Xiaomi MIPAD 3. There are still some bugs I can't fix yet. So, just test it and let me know about issues/bugs i missed. I hope you will enjoy this ROM
This version is only for flashing via TWRP! (it can be found here https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647)
Version Information
Status: stable!
Created: 12.03.2019
Updated: 06.07.2019
Android version: kernel 3.18.35, android 7.0 Nougat
What's done/features
Added ROOT (Magisk)
No bugs with battery statistics (like it was on stock ROM)
Unique MIUI design and customization (navbar and more)
Special icon pack (from another Xiaomi device)
New useful functions (split screen)
All main modules work (camera, wifi, BT, etc)
All Apps (MiVideo , etc) should be updated to the latest version for correct work !
Bugs
Double tap to awake function
Gestures
No fingerprint :crying:
Average battery consumption (device doesn't go to sleep mode) - SOLVED!
Installation
Download firmware to internal storage
Reboot into TWRP
Do this wipes in Wipe section: system, cache, dalvik,data
Reboot recovery: go to reboot section -> choose Reboot recovery
Go to install section and choose .zip package
After installation completed just reboot device and enjoy
If you face error "failed to mount system" or something like this after installation completed - don't mind it and reboot
Fixes
1) Battery draining fix
Finally, this fix is permanent!
Download all required files in internal memory, link is below.
After that open magisk manager and go to Modules.
Choose Init.d-Injector_v2.3, wait until installation is completed and reboot your device.
Make init.d folder in system/etc so the full file path should be system/etc/init.d.
Place fingerprint_fix script in init.d folder and set equal permissions for both file and folder: 0755 , it should look like "П".
Reboot your device and enjoy
Screenshots
Download
The link is here - https://drive.google.com/drive/folders/1NPupJhBmRJRtHfGkk6aQ40KO_YMiQSEw?usp=sharing
If you would like to support further development - https://www.paypal.me/teclastT8development
MIUI firmware development is stopped.
Nice work!
Thank you!!
I have tested the ROM for several weeks and the result, to be a beta, is frankly good. On the negative side, only highlight that I couldn't add any widget. When I give to add widget, only 1x1 size is available. I couldn't put the clock with the weather, for example.
Please, keep it up, do not forget about MIUI, and thank you very much for your work!
Sword900 said:
Disclaimer: I am not responsible for anything bad that may occur with your device, but I will take all the credit you can give me if it works for you!
After some months of hard work I would like to present MIUI ROM for our device (Teclast T8)! It was ported by me from Xiaomi MIPAD 3. There are still some bugs I can't fix yet. So, just test it and let me know about issues/bugs i missed. I hope you will enjoy this ROM
This version is only for flashing via TWRP! (it can be found here https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647)
Version Information
Status: BETA (NOT for everyday usage)
Created: 12.03.2019
Android version: kernel 3.18.35, android 7.0 Nougat
What's done/features
Added ROOT (Magisk)
No bugs with battery statistics (like it was on stock ROM)
Unique MIUI design and customization (navbar and more)
Special icon pack (from another Xiaomi device)
New useful functions (split screen)
All main modules work (camera, wifi, BT, etc)
All Apps (MiVideo , etc) should be updated to the latest version for correct work !
Bugs
Double tap to awake function
Gestures
No fingerprint :crying:
Average battery consumption (device doesn't go to sleep mode)
Installation
Download firmware to internal storage
Reboot into TWRP
Do this wipes in Wipe section: system, cache, dalvik,data
Reboot recovery: go to reboot section -> choose Reboot recovery
Go to install section and choose .zip package
After installation completed just reboot device and enjoy
If you face error "failed to mount system" or something like this after installation completed - don't mind it and reboot
Screenshots
Download
The link is here - https://mega.nz/#!ywokTQ5Z!vyvKy28V2ssQkXdHeh_uotVhhwBfPxm8xyOnnSMn7nI
If you would like to support further development - https://www.paypal.me/teclastT8development
P.S For now MIUI firmware development is stopped due to my studing and "busy days"
Click to expand...
Click to collapse
nerojdn said:
Thank you!!
I have tested the ROM for several weeks and the result, to be a beta, is frankly good. On the negative side, only highlight that I couldn't add any widget. When I give to add widget, only 1x1 size is available. I couldn't put the clock with the weather, for example.
Please, keep it up, do not forget about MIUI, and thank you very much for your work!
Click to expand...
Click to collapse
Thanks for your feedback! I didnt't check widgets, so I will but later. . . For now, I assume that this problem is connected with original MIpad firmware as if it is still in development. The biggest problem in this ROM is battery draining and I don't know how to fix it. Let me know if you find any other issues.
P.S. You also can check other stable ROM, e.g Pixel Experience. It has not been tested yet by other users except me. You can find the link in TWRP thread.
Finally, MIUI becomes a stable ROM!
So, test it again and let me know if you find any other critical issues.

Dolby Digital Plus ™ for Xiaomi Mi 8 AOSP [28.02.2020]

works on PixelExperience Android Q,
you need to check all other roms yourself, please check and comment in your own responsibility. I am not responsible for any damage to the phone
This mod will not work on MIUI !!!
"older version of Android" is a normal message and it is not an error !
_______________________________________________________________________________________________________________________________________________________________
you need min. Magisk v20.1
_______________________________________________________________________________________________________________________________________________________________
REQUIRED FILES HERE !!
_______________________________________________________________________________________________________________________________________________________________
[NEW xx.xx.2020]
1. Insall Magisk SELinux Manager: choose permisive mode
2. Download and install [Q-10]Dolby Digital Plus_v.7.2-[MMT Ex]-20200222.zip
3. install Audio Modification Lib, Dont open dolby you need reeboot your device first !!
!! Dolby app crashing after you change main settings or when you turn off/on but working propetly
Tested on latest Android Q pixel experience ROM
_______________________________________________________________________________________________________________________________________________________________
[OLDER ROMS xx.xx.2019]
To install Dolby on your Mi 8 you need to follow this steps:
1. Magisk SELinux Manager: choose permisive mode
2. Audio Compat Patch
3. Audio Modification Lib, now reboot your device
4. download [Q-10]Dolby Digital Plus_v.6.8-[UNiTY][Light]_by_repey6-20191212.zip form this post LINK ,
and install via Magisk manager ,Dont open dolby you need reeboot your device first !!
_______________________________________________________________________________________________________________________________________________________________​Thanks for @repey6 for Dolby Android Q ver
İs it work with eu last beta?
read post again please okay? all are there
Followed exactly the steps you mentioned and dolby app crashes for me on pixel experience android Q
Crashes on Q. "...for older version of Android"
speedgeil said:
Crashes on Q. "...for older version of Android"
Click to expand...
Click to collapse
i install this on android Q without any problem and working fine
mmvxky said:
i install this on android Q without any problem and working fine
Click to expand...
Click to collapse
Followed the steps exactly as described. It crashes with "...for older versions of android". The pixel rom 2019-12-25, Magisk 20.3
speedgeil said:
Followed the steps exactly as described. It crashes with "...for older versions of android". The pixel rom 2019-12-25, Magisk 20.3
Click to expand...
Click to collapse
Me too, i using Evolution x 3.4 and crashing app. İts a log;
https://del.dog/asapepunux
Its working to me dolbt and viper, thanks.
Flash audio comparability file and Dolby in magisk
Reboot
Flash audio modification library in magisk and reboot.
But I think dual speaker mod is deactivated
gabwielcastwo said:
Its working to me dolbt and viper, thanks.
Flash audio comparability file and Dolby in magisk
Reboot
Flash audio modification library in magisk and reboot.
But I think dual speaker mod is deactivated
Click to expand...
Click to collapse
Which rom do you use?
gabwielcastwo said:
Its working to me dolbt and viper, thanks.
Flash audio comparability file and Dolby in magisk
Reboot
Flash audio modification library in magisk and reboot.
But I think dual speaker mod is deactivated
Click to expand...
Click to collapse
What version magisk are you using?
I read somewhere that dolby started crashing after updating to magisk 20 and that version 19.3 works fine
Will test out later
Everything works well on Havoc OS. Installation done as in OP described (Magisk 20.3). Thanks a lot for explanation.
If phone already has an audio eq app prebuilt do I need to follow any different steps?
I managed to install it but app doesnt work in the background if i quit it says remote service has stopped and stops how can i fix it
Works on AOSPA(Paranoid)
Doesn't works on Stock with weekly updates.
Dolby always forced close. First start Dolby messages : warning, it is an older version...
hi bro
How to raise the volume of the call
Because her voice is very weak
Android 10 mi mix rom
Sent from my MI 8 using Tapatalk
Work's in my case. Thanks a lot!
I have latest havoc build.
UPDATE !!
mmvxky said:
works on PixelExperience Android Q,
you need to check all other roms yourself, please check and comment in your own responsibility. I am not responsible for any damage to the phone
This mod will not work on MIUI !!!
"older version of Android" is a normal message and it is not an error !
_______________________________________________________________________________________________________________________________________________________________
you need min. Magisk v20.1
_______________________________________________________________________________________________________________________________________________________________
[NEW xx.xx.2020]
1. Insall Magisk SELinux Manager: choose permisive mode
2. Download and install [Q-10]Dolby Digital Plus_v.7.2-[MMT Ex]-20200222.zip
3. install Audio Modification Lib, Dont open dolby you need reeboot your device first !!
!! Dolby app crashing after you change main settings or when you turn off/on but working propetly
Tested on latest Android Q pixel experience ROM
_______________________________________________________________________________________________________________________________________________________________
[OLDER ROMS xx.xx.2019]
To install Dolby on your Mi 8 you need to follow this steps:
Download all 3 files from this folder and respectively install using Magisk:
1. Magisk SELinux Manager: choose permisive mode
2. Audio Compat Patch
3. Audio Modification Lib
now reboot your device
download [Q-10]Dolby Digital Plus_v.6.8-[UNiTY][Light]_by_repey6-20191212.zip form this post LINK ,
and install via Magisk manager ,Dont open dolby you need reeboot your device first !!
_______________________________________________________________________________________________________________________________________________________________
Thanks for @repey6 for Dolby Android Q ver
Click to expand...
Click to collapse
UPDATE !!!​
Can confirm it works on (Q) The Pixel Rom R26 in Background (Remote Service has stopped)

Themes / Apps / Mods Viper4android

Anyone successfully installed viper4android on android 12. Please can you share the steps on how to do it. I've been digging the web on how to do it but failed.
Yep. theres a magisk zip for it. i don't use viper4 any more here it is
The step by step I used to get it working was as follows:
Flash a SELinux permissive magisk module - reboot
Install ainur narsil magisk module - reboot
Disable ainur narsil in magisk manager (not sure if this does anything but it works for me)
Install Audio Modification Library - reboot
Install Viper4Android magisk module AND open the app and install the driver (will reboot as a part of this)
Install Audio Compatibility Patch magisk module - reboot
Re-Enable ainur narsil module in magisk manager
Remove SELinux permissive
I've had success in this order. for the Audio Compatibility Patch I use vol up for the first two options and then vol down for the rest.
The app also seems to need to run in compatibility mode or legacy mode
Not sure if this will work for everyone but seems to be a bit hit or miss in general
Did not work for me . But after flashing the "Sound enchancement for Sony 10" viper4android legacy now worked.

Categories

Resources