Nethunter Kernel - Realme 3 Pro Questions & Answers

Has anyone tried to recompile rm 3 pro kernel for NETHUNTER support ? I am asking about monitor mode support and hid patches ?

Related

[Help]Enabling USB HID Support

i have gt-i9301i running resurrection remix 5.1.1 .currently my kernel doesnt have usb hid emulation support to run badusb type attacks .
i found pelya's keyboard app.but my device dont have prebuilt kernel to flash and use hid emulation.but he has a kernel patch in github repo to add support for more devices.
question is how can i apply patch to my current kernel.do i need source code of kernel and recompile it or backup of my kernel and then patch it.if you know how to apply this patch please teach me i need it .

[Question]Did Kali Nethunter works for this device?

I want to know it's possible or not to install Kali NetHunter on Lenovo A7-10F.
Link of Kali NetHunter: https://forum.xda-developers.com/android/software-hacking/kali-nethunter-mediatek-device-t3547416

Kali nethunter External USB Adaptor support Guide

Here is quick guide of how to enable external WiFi in Kali nethunter.
Device : Redmi 3S prime (land)
OS : ResurrectionRemix ROM 5.8.4
Nethunter : How to install Kali nethunter in Redmi 3S prime
Kernel : Beacon kernel
USB Adaptor : tplink wn722n V1
OTG cable
Steps :
- install RR ROM
-flash beacon kernel
- in nethunter Kali extract kalifs-armhf-full.tar.xz from zip 1
- in recovery flash "update-nethunter-generic-arm64-3.15.4-20170211-0304.zip"
- now rebbot and install chroot ( path of "kalifs-armhf-full.tar.xz")
Troubleshooting:
-If you follow steps of installing nethunter by above mention link and device get into bootloop then flash ROM and kernel and try only flash update-nethunter-generic-arm64-3.15.4-20170211-0304.zip
- to stop ongoing command like reaver or airodump-ng use hacker's keybord. Press CLT & c.
all credit goes to developers of respective file
Pls comments if any problems while installing.
Good luck:good::good::good:
im trying to get the Realtek RTL8192CU to work with this setup, a thread said that the Realtek RTL8192CU is compatible with some setups

[KALI NETHUNTER] How to Patch my device kernel for Kali Nethunter to work Perfectly??

I am new at this and don't know about patching the kernel if anyone interested to make the tutorial or patch the kernel for me will be appreciated!!
I want to patch the kernel for Kali Nethunter for the devices that are listed below.
My Devices:-
LeEco Le 2 :-boot.img
Lenovo K3 Note :-boot.img

[KERNEL] Kali Nethunter for Galaxy S8/S8+ Note 8 SM-G950X SM-G955X SM-N950X [Lineage 20] [Android 13]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Alynx Nethunter Kernel for Samsung Galaxy S8/S8+/NOTE 8 Lineage 20 Android 13
What is Nethunter ?
Kali NetHunter is a free & Open-source Mobile Penetration Testing Platform for Android devices, based on Kali Linux.​
Click to expand...
Click to collapse
Code:
I'm not responsible for bricked devices, dead SD cards.
Do some research if you have any concerns about features included in this Kernel.
About the kernel :
The kernel is based on source from lineage thanks to @Ivan_Meler & lineage OS
Features:
HID gadget (Doesn't work on exynos devices since it is disabled by samsung)
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
RTL88XXAU USB WIFI Support
RTL8188EUS USB WIFI Support
ATH9K_HTC USB WIFI Support
Ethernet Support
Bluetooth USB Support
SDR Support
Installation:
Boot the device into Twrp recovery .
Backup your current kernel inside Twrp
Download the flashable zip file.
Flash the zip
Install Busybox
Download Wireless_firmware module, open Magisk and install the zip as Magisk module
Install Nethunter store
Install Nethunter app & Nethunter terminal from Nethunter store
Open Nethunter app & Download the full chroot kalifs within the app and let the app setup everything. After it finishes it'll start the chroot automatically.
Update the sources with apt-get update && apt-get upgrade in the chroot using nethunter terminal
Reboot the device (optional)
Screenshots:
Extra:
if you want to replace nethunter terminal with termux (not completely nethunter main app will still launch nethunter terminal everytime for any operation but you can access kali chroot environment from termux.
(i know nethunter terminal sucks)
Follow these steps to access the environment from termux:
Install termux from f-droid or from nethunter store
Open termux and install root repo using pkg update && pkg install root-repo tsu wget
Download the script from termux wget https://raw.githubusercontent.com/name-is-cipher/boot-nethunter/main/install_boot-kali.sh
chmod +x install_boot-kali.sh && ./install_boot-kali.sh
let it set up everything.
restart termux and type boot-kali to access the nethunter chroot environment
Downloads:
https://mega.nz/folder/aAo3TSqa#W7iyF_8dEVVgwS9OPeJO3w
if you like my work give this post a like its free : )
Credits:
@Ivan_Meler​Lineage OS
XDA:DevDB Information
Nethunter Kernel for Samsung Galaxy S8, S8+ & Note 8
Contributors: V3rB0se
Source Code: https://github.com/V3rB0se/android_kernel_samsung_universal8895
Version Information
Status: Stable
Stable Release Date: 04/03/2023
Created 15/02/2023
Last Updated 04/03/2023
Spoiler: Changelog 2023/03/04
Changelog 2023/03/04
- RTL8XXXAU USB WIFI
- Bluetooth (UART HCI)
- Fix random reboots (while performing injection using RTL8192)
- Switch to GCC 2019
- Revert changes in default governor
Downloads:
Mega
V3rB0se said:
View attachment 5836765
Alynx Nethunter Kernel for Samsung Galaxy S8/S8+/NOTE 8 Lineage 20 Android 13
What is Nethunter ?
Code:
I'm not responsible for bricked devices, dead SD cards.
Do some research if you have any concerns about features included in this Kernel.
About the kernel :
The kernel is based on source from lineage thanks to @Ivan_Meler & lineage OS
Features:
HID gadget (Doesn't work on exynos devices since it is disabled by samsung)
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
RTL88XXAU USB WIFI Support
RTL8188EUS USB WIFI Support
ATH9K_HTC USB WIFI Support
Ethernet Support
Bluetooth USB Support
SDR Support
Installation:
Boot the device into Twrp recovery .
Backup your current kernel inside Twrp
Download the flashable zip file.
Flash the zip
Install Busybox
Download Wireless_firmware module, open Magisk and install the zip as Magisk module
Install Nethunter store
Install Nethunter app & Nethunter terminal from Nethunter store
Open Nethunter app & Download the full chroot kalifs within the app and let the app setup everything. After it finishes it'll start the chroot automatically.
Update the sources with apt-get update && apt-get upgrade in the chroot using nethunter terminal
Reboot the device (optional)
Screenshots:
View attachment 5836757 View attachment 5836759 View attachment 5836763
Extra:
if you want to replace nethunter terminal with termux (not completely nethunter main app will still launch nethunter terminal everytime for any operation but you can access kali chroot environment from termux.
(i know nethunter terminal sucks)
Follow these steps to access the environment from termux:
Install termux from f-droid or from nethunter store
Open termux and install root repo using pkg update && pkg install root-repo tsu wget
Download the script from termux wget https://raw.githubusercontent.com/name-is-cipher/boot-nethunter/main/install_boot-kali.sh
chmod +x install_boot-kali.sh && ./install_boot-kali.sh
let it set up everything.
restart termux and type boot-kali to access the nethunter chroot environment
Downloads:
https://mega.nz/folder/aAo3TSqa#W7iyF_8dEVVgwS9OPeJO3w
if you like my work give this post a like its free : )
Credits:
@Ivan_Meler​Lineage OS
XDA:DevDB Information
Nethunter Kernel for Samsung Galaxy S8, S8+ & Note 8
Contributors: V3rB0se
Source Code: https://github.com/V3rB0se/Alynx-exynos-8895
Version Information
Status: Stable
Stable Release Date: 15/02/2023
Created 15/02/2023
Last Updated 15/02/2023
Click to expand...
Click to collapse
He how to enable rtl88XXau driver? Via module or its build in kernel?
Jankow32 said:
He how to enable rtl88XXau driver? Via module or its build in kernel?
Click to expand...
Click to collapse
it needs an update. will post the updated build soon.
V3rB0se said:
it needs an update. will post the updated build soon.
Click to expand...
Click to collapse
And it is posiblle to enable hid via module or in s8 block hid?
V3rB0se said:
it needs an update. will post the updated build soon.
Click to expand...
Click to collapse
And dex mode is enabled? Monitor is working on hdmi but i think is not corect.. if you need some help i can help, i have a little knowledge about makeing kernel but i dont know any language of programming... whith toolchain you use if i can know? And also you use CC=clang? Is good phone i think and good project what you make.... i have 2 s8 one is whith broken screen and battery but i can use it on dex.... i can test a little...
Jankow32 said:
He how to enable rtl88XXau driver? Via module or its build in kernel?
Click to expand...
Click to collapse
the driver should be working fine now.
what is wrong here?
i cant start airmon
V3rB0se said:
View attachment 5836765
Alynx Nethunter Kernel for Samsung Galaxy S8/S8+/NOTE 8 Lineage 20 Android 13
What is Nethunter ?
Code:
I'm not responsible for bricked devices, dead SD cards.
Do some research if you have any concerns about features included in this Kernel.
About the kernel :
The kernel is based on source from lineage thanks to @Ivan_Meler & lineage OS
Features:
HID gadget (Doesn't work on exynos devices since it is disabled by samsung)
USB WiFi, mac80211 (Monitor mode, packet capture, packet injection) [Compatibility List]
RTL88XXAU USB WIFI Support
RTL8188EUS USB WIFI Support
ATH9K_HTC USB WIFI Support
Ethernet Support
Bluetooth USB Support
SDR Support
Installation:
Boot the device into Twrp recovery .
Backup your current kernel inside Twrp
Download the flashable zip file.
Flash the zip
Install Busybox
Download Wireless_firmware module, open Magisk and install the zip as Magisk module
Install Nethunter store
Install Nethunter app & Nethunter terminal from Nethunter store
Open Nethunter app & Download the full chroot kalifs within the app and let the app setup everything. After it finishes it'll start the chroot automatically.
Update the sources with apt-get update && apt-get upgrade in the chroot using nethunter terminal
Reboot the device (optional)
Screenshots:
View attachment 5836757 View attachment 5836759 View attachment 5836763
Extra:
if you want to replace nethunter terminal with termux (not completely nethunter main app will still launch nethunter terminal everytime for any operation but you can access kali chroot environment from termux.
(i know nethunter terminal sucks)
Follow these steps to access the environment from termux:
Install termux from f-droid or from nethunter store
Open termux and install root repo using pkg update && pkg install root-repo tsu wget
Download the script from termux wget https://raw.githubusercontent.com/name-is-cipher/boot-nethunter/main/install_boot-kali.sh
chmod +x install_boot-kali.sh && ./install_boot-kali.sh
let it set up everything.
restart termux and type boot-kali to access the nethunter chroot environment
Downloads:
https://mega.nz/folder/aAo3TSqa#W7iyF_8dEVVgwS9OPeJO3w
if you like my work give this post a like its free : )
Credits:
@Ivan_Meler​Lineage OS
XDA:DevDB Information
Nethunter Kernel for Samsung Galaxy S8, S8+ & Note 8
Contributors: V3rB0se
Source Code: https://github.com/V3rB0se/Alynx-exynos-8895
Version Information
Status: Stable
Stable Release Date: 04/03/2023
Created 15/02/2023
Last Updated 04/03/2023
Click to expand...
Click to collapse
Hi!
I flashed the kernel and...
1-my kernel name in settings changed to
" 4.4.302-gd45ecc236a98-dirty "
is it normal?
2-my usb Bluetooth doesn't work
I don't know what type of processor I have
Where did I wrong?
imardeshir said:
Hi!
I flashed the kernel and...
1-my kernel name in settings changed to
" 4.4.302-gd45ecc236a98-dirty "
is it normal?
2-my usb Bluetooth doesn't work
I don't know what type of processor I have
Where did I wrong?
Click to expand...
Click to collapse
yes its fine, and for the usb bluetooth what device are we talking about ?
@V3rB0se, you have a very important PM. Please check your inbox. Thanks
Thy for you Work!

Categories

Resources