Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
StormTrooper89 said:
I'll post a pic later. A miui startup screen, fastboot and recovery screen.
Click to expand...
Click to collapse
Does touch work in twrp?
sotosgolf said:
Does touch work in twrp?
Click to expand...
Click to collapse
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
have you tried reflashing miui through mi flashtool in fastboot mode?
If you can fast it to fastboot perhaps flash the original miui. Maybe you flash a 75hz kernel that some pocophone is not compatible I already did that but twrp is sure working for me though.
StormTrooper89 said:
Not working too. I'm still convinced it's not a hardware problem. But right now I'm out of ideas.
Click to expand...
Click to collapse
If you have kept a vendor image backup of after you unlocked the phone, flash it. Differently, your only option is flashing your original miui via fastboot (not an update).
StormTrooper89 said:
Hello first of all my phone touch screen not working at all. It can't react to my touch. Even i had to reboot it by long pressing the power button. The phone still can reboot to recovery,fastboot mode. It's like you're touching the person in coma. No reaction.
What i do before it gets into this problem, i flash a kernel (not gonna tell n not blaming dev either). At first 10 minutes it was ok until i reboot again to recovery to flash magisk zip. After it went to recovery mode my phone didn't react to my touch.
What i do is i try to flash stock global rom. The phone boots but still in coma. Just a new dress for a coma person. Any ideas?
Click to expand...
Click to collapse
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
D1stRU3T0R said:
Hi. Sorry for heating this.
I know it would make the dev look bad, but could you please mention which kernel you used? So the dev could try and look into it. If it was my kernel, that's strange, we literally never broke and phone. Now we saw a post about NGK breaking a touch, that's why I'm asking you to at least somehow hint at the kernel
Click to expand...
Click to collapse
I flashed Lawrun K. But don't worry I didn't blame him the dev for the cause of my phone.
I already flash stock miui using miui flash tool. Even flash the outdated version in hope that it will back to normal but it's not.
What bad is that in any screen, either home, stock recovery nor twrp the touchscreen won't work. The rest work perfectly. It can boot, can flash via adb, flash tool whatsoever.
Right now i cant replace my screen yet due to covid19 restrictions order to stay at home and all shops closed. If any of you guys have idea please do share. For the dev of Lawrun Kernel, it's not your fault. I already understand the risk of flashing all this tweaks.
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
stinka318 said:
I know it may sound odd but have you tried plugging in a mouse from a computer and see if you can get a curser to click on the on screen buttons.....
Click to expand...
Click to collapse
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
StormTrooper89 said:
Lol i already did that too. I figured it before when i use my oppo find 7 with screen crack and that was a long time ago. But no cursor appeared.
Click to expand...
Click to collapse
It is ashame that there not some sort of way to modify Samsung's remote system that you plug it in to your laptop and can control it without the use of the touch screen.......
Related
My Friend has a HTC Wildfire, he's on a tour with his friends
Problem starts now , He was talking with his friend and suddenly screen went blank. He's using VillianROM on it now when he switches on he can't see the screen at all, but phone it self works when someone calls he's still able to answers it. he cant flash new ROM Also. he can't see screen so
Any Help ? anyone had such kind of a problem with HTC ?
maheshpatel said:
He was talking with his friend and suddenly screen went blank. He's using VillianROM on it now when he switches on he can't see the screen at all, but phone it self works when someone calls he's still able to answers it.
Click to expand...
Click to collapse
This is certainly not related to VillianROM in any way.
I think it's a hardware problem - there's something wrong with display panel. If the backlight is dead you should barely see very dark image on the screen in bright lightning conditions.
Anyway, looks like there's nothing you nor your friend can do to fix it. You need to send it to service.
maheshpatel said:
he cant flash new ROM Also. he can't see screen so
Click to expand...
Click to collapse
If the phone has USB debugging enabled by accident (I guess it's hard to turn it on blindly) then you can access it using adb shell. If you have custom recovery image installed, such as Clocwork or Amon_RA, you can boot to it and fave full access to your phone through USB using adb (or fastboot) so you can flash new ROM images.
oyah said:
If you have custom recovery image installed, such as Clocwork or Amon_RA, you can boot to it and fave full access to your phone through USB using adb (or fastboot) so you can flash new ROM images.
Click to expand...
Click to collapse
Yes, what he said ^^.
I'll just add one more thing. To get to custom recovery easily, pull the battery out and put it back in again. Then perform what ever key combination to boot custom recovery.
Good luck to your friend!
You might also have more luck posting in the Wildfire sections where they me able to help. It does seem like a Hardware issue with the screen to me? Was it dropped or anything?
It seems like hardware. Probably connection between screen and PCB.
ya his phone dropped many times, ya it seems like hardware issue to me also..
so im new to this whole rom thing and i tried installing megatron rom form sdcard with rom manger and when i started it the phone reset and got stuck on LG screen. I tried hard reset and removing the battery. Not working. Do i have a bricked phone now, please say no. HELP ME please
deathmill3001 said:
so im new to this whole rom thing and i tried installing megatron rom form sdcard with rom manger and when i started it the phone reset and got stuck on LG screen. I tried hard reset and removing the battery. Not working. Do i have a bricked phone now, please say no. HELP ME please
Click to expand...
Click to collapse
I'm hoping that you made a backup before you flashed the rom. If you did you should be able to boot into recovery and restore.
lol i think thats what i did. I backup everything using Titanium and rom manger on my sdcard. i just dont know how boot into recovery and restore. thanks for the reply
yep bricked...
All you can do now i's try to flash stock rom with kdz..
and how do u do that lol
deathmill3001 said:
and how do u do that lol
Click to expand...
Click to collapse
Here's the stock rom: csmg.lgmobile.com:9002/swdata/WEBSW/LGP509BK/ATMOBK/V10l_00/V10L_00.kdz
and you'll need KDZ(run it in compatibility mode if using win7 64bit):
http://www.megaupload.com/?d=B99JDF9I
boot phone into emergency mode: Home+Volume Up+Power
connect to PC via USB and flash with KDZ in 3qct +Emergency mode
i cant put my phone in emergency mode
deathmill3001 said:
i cant put my phone in emergency mode
Click to expand...
Click to collapse
my mistake. it is actually Back Button+Up Volume+Power
still nothing :[
Use it as a vibrator from now on, if u can. Haha j/k.
Go for warranty and see what happens..
lol hmmm i wonder what males can do with that.....
i was thinking about doing that and see if i could pull a fast one on radioshack
You did a nand backup before flashing Megatron, right? If so, you should boot in recovery using Home + Vol Down + Power and restore it from there. If not, you have no alternative but flashing the rom again (or any other rom). Be sure to wipe everything from recovery before that.
If that fails, you should get the official rom for your location and flash it with kdz (there is a very well done guide here on XDA for doing that, search for it).
And consider flashing Void next time, is more stable and has the same features (and more) as Megatron (hwacc, jit, oc, stagefright etc).
In any case, if the phone boots, even if gets stuck on LG splash screen, it is not bricked. It can be re-flashed easily, just follow the steps in the guides.
How to flash original rom: http://forum.xda-developers.com/showthread.php?t=875881
Original rom list: http://forum.xda-developers.com/showthread.php?t=865479&highlight=stock+rom
thank you so much for the reply but for some strange reason i cant put my phone into recovery or emergency mode. idk why and i tried like all the button presses. Do you hold them down or press them in order. im sry for being a noob lol. but u gave me hope knowing now its not bricked
deathmill3001 said:
thank you so much for the reply but for some strange reason i cant put my phone into recovery or emergency mode. idk why and i tried like all the button presses. Do you hold them down or press them in order. im sry for being a noob lol. but u gave me hope knowing now its not bricked
Click to expand...
Click to collapse
press and hold down HOME + VOL DOWN while the phone is off, then turn it on, keeping that 2 buttons pressed until recovery appears.
But if you have used rom manager, this won't work. Your only chance to unbrick is this: http://forum.xda-developers.com/showthread.php?t=883314
rom manager don't support yet optimus t
The same happened to me when I flashed LOL rom. I was reading that it can sometimes take up to 5 minutes to reach the boot animation. My phone reached the boot animation in 6-7 minutes. How long did you wait before you removed the battery?
thats not working either. all i saw was a bunch of ppl with the same problem and eventually sent it to LG service
ummm like about 3 minutes cause i was freaking out lol. that could be it :/
deathmill3001 said:
ummm like about 3 minutes cause i was freaking out lol. that could be it :/
Click to expand...
Click to collapse
I was about to pull mine out too after 3-4 minutes. I was freaking out also but had to go to the washroom when this happened. When I came back, the phone booted. If I didn't use the washroom, I would have bricked my phone, lol.
A lot of people have this problem because on the Optimus One it takes forever to load the first time. My samsung vibrant was extremely quick, 1 minute max
as soon as u send to warranty, the faster u get ur usable phone back
or just use it as vibrator
shadow_cruiser said:
I was about to pull mine out too after 3-4 minutes. I was freaking out also but had to go to the washroom when this happened. When I came back, the phone booted. If I didn't use the washroom, I would have bricked my phone, lol.
A lot of people have this problem because on the Optimus One it takes forever to load the first time. My samsung vibrant was extremely quick, 1 minute max
Click to expand...
Click to collapse
lol lucky u. idk this was my first android phone and i still have 1 year and 8 months left on my contract so i have no clue on what to do :/
hey. i went to take my evo off the charging dock and then went to wake up the screen and when i do the whole screen is in rainbow, snow pixel. like all i can see normal is the status bar. i can boot and reboot, boot into recovery ( but cant see anything except the very first line on the top of the screen) but the screen is just messed up. it looks like one of this old tv's that when they loose connection they get white and black snow except mine is colored snow.
any ideas?
thanks
Shotgun4 said:
hey. i went to take my evo off the charging dock and then went to wake up the screen and when i do the whole screen is in rainbow, snow pixel. like all i can see normal is the status bar. i can boot and reboot, boot into recovery ( but cant see anything except the very first line on the top of the screen) but the screen is just messed up. it looks like one of this old tv's that when they loose connection they get white and black snow except mine is colored snow.
any ideas?
thanks
Click to expand...
Click to collapse
I would imagine LCD failure, though I can't be quite sure. Could you include a picture of it?
Shotgun4 said:
hey. i went to take my evo off the charging dock and then went to wake up the screen and when i do the whole screen is in rainbow, snow pixel. like all i can see normal is the status bar. i can boot and reboot, boot into recovery ( but cant see anything except the very first line on the top of the screen) but the screen is just messed up. it looks like one of this old tv's that when they loose connection they get white and black snow except mine is colored snow.
any ideas?
thanks
Click to expand...
Click to collapse
The same problem with my GSM Evo 3d:/
What ROM, Radio, kernel are you using? LeeDroid V5.3 and LeeDroid V4.2.1-1.94GHz-KERNEL, radio - 10.59.9020.00_10.15.9020.06 in my case
http://img515.imageshack.us/img515/543/img20120225140835.jpg
I noticed that when I removed battery and tried to boot, in the beginning screen was black and then was LeeDroid's boot-sound and when phone is supposed to ask for my PIN code the rainbow-pixel screen appears.
Could anyone make step by step instruction how to reflash ROM? I cannot see anything so I need all information (like push vol down two times). I hope it might works
Akasa Fox said:
I would imagine LCD failure, though I can't be quite sure. Could you include a picture of it?
Click to expand...
Click to collapse
really... LCD Failure... how would i fix that... here are some pics. I am running this rom http://forum.xda-developers.com/showthread.php?t=1456793 on version 1.3.
so i will post pics, and do you think rogers would be able to fix this problem or would it cost a hell of alot of money?
I'm not convinced that it's LCD failure. LCD is working (in a strange way) and in my case touch is working as well. In my opinion it might be motherboard (or anything that controls LCD). I'm going to try changing radio, rom and kernel - maybe it will work. But I really need your help with the step by step guide I mentioned in my previous post.
ok, so what are you going to try and do, are you going to try and reflash a rom?
like i can try and give you instructions, but i need to know what you want to do.
EDIT: I have downloaded and tried to run the RUU for My rogers htc evo. it is installing the rom, stock radio, and what not. so when it is done i will update and post back if that worked or not.
UPDATE: Installing the new RUU did not work, the screen is still messed up im guessing its a hardware failure. im going to try to bring it into rogers and see if they will do anything to help me out.
Something new, now my screen is completely black (but i can hear that touchscreen and touch buttons are working).
@Shotgun4 - please let me know what you'll find out.
misiolin said:
@Shotgun4 - please let me know what you'll find out.
Click to expand...
Click to collapse
I Will do That.
Shotgun4 said:
I Will do That.
Click to expand...
Click to collapse
Thanks mate
My screen is once more pixelful
I don't want to start new topic so I'll ask here:
Could anyone please help me with going back to stock rom?
My LCD is still not functional so it'll be unusual guide.
1. I open cmd and run adb reboot bootloader command (with stock rom in PG86IMG.zip file)
2. Does phone starts in fastboot or bootloader? If fatboot I need to press power button right?
3. Now phone should check for PG86IMG.zip file, what should I press to accept flash?
4. Now few minutes for flash
5. And what button should I press to reboot?
Is there any easier way to flash stock rom without working LCD? with adb commands maybe? please help me guys
misiolin said:
I don't want to start new topic so I'll ask here:
Could anyone please help me with going back to stock rom?
My LCD is still not functional so it'll be unusual guide.
1. I open cmd and run adb reboot bootloader command (with stock rom in PG86IMG.zip file)
2. Does phone starts in fastboot or bootloader? If fatboot I need to press power button right?
3. Now phone should check for PG86IMG.zip file, what should I press to accept flash?
4. Now few minutes for flash
5. And what button should I press to reboot?
Is there any easier way to flash stock rom without working LCD? with adb commands maybe? please help me guys
Click to expand...
Click to collapse
Your in diagnostic mode. Hold down the power button for 45 seconds then press the camera button twice it should reset the phone.
Diagnostic Mode, never herd about it. I tried both with phone on and off, no luck :/. Anyone has idea what it might be? (I'll post picture once more http://img515.imageshack.us/img515/543/img20120225140835.jpg)
PS
I managed to reinstall my shipped ROM, but screen is still f*cked up ;(.
Guys I have a problem. Is there any way to switch on USB debugging without working screen? I need to s-on my phone and I cannot use adb without USB debugging. My touch screen and touch buttons are working though so maybe someone could make screenshots how to switch it on? I'm on stock ROM now.
Or maybe there is other method to use step 5 of this tutorial without USB Debugging?
And one more question, If my phone doesn't connect with computer in bootloader/fastboot, does it means that I have s-on?
Well i got this tablet wanted to intall cynagon mod for that i need twrp i installed twrp transfered it to my tablet went into recovery and flashed twrp after it rebooted into TWRP the screen was all fuzzy then the menue came up i could'nt touch anything so i pressed the power buttom it said swipe to unlock but i couldnt touch anything so i held the power off button for 30sec it turn off i turn it back on and it was the exect same thing can someone help me please what do i do ? is it bricked?
viperasap said:
Well i got this tablet wanted to intall cynagon mod for that i need twrp i installed twrp transfered it to my tablet went into recovery and flashed twrp after it rebooted into TWRP the screen was all fuzzy then the menue came up i could'nt touch anything so i pressed the power buttom it said swipe to unlock but i couldnt touch anything so i held the power off button for 30sec it turn off i turn it back on and it was the exect same thing can someone help me please what do i do ? is it bricked?
Click to expand...
Click to collapse
Hi,
I was just wondering: Have you rooted your device and have you installed twrp for your specific device? (I know, sounds like a dumb question, but you'll be suprised how many people install wrong versions). Because if you have rooted your device properly, and you installed twrp (one for your device), then you should be just fine. But I'm afraid that you haven't, and that therefore the screen is all fuzzy. And also, is the screen fuzzy in the twrp menu, or when you are on (e.g) the homescreen? If the second option doesn't apply, then you are not bricked. Please answer and give as much information as possible on what you did, then I might be able to help you. (btw, it's very unlikely that you are hard-bricked and that your device won't be able to be repaired)
(and a happy new year )
pep18 said:
Hi,
I was just wondering: Have you rooted your device and have you installed twrp for your specific device? (I know, sounds like a dumb question, but you'll be suprised how many people install wrong versions). Because if you have rooted your device properly, and you installed twrp (one for your device), then you should be just fine. But I'm afraid that you haven't, and that therefore the screen is all fuzzy. And also, is the screen fuzzy in the twrp menu, or when you are on (e.g) the homescreen? If the second option doesn't apply, then you are not bricked. Please answer and give as much information as possible on what you did, then I might be able to help you. (btw, it's very unlikely that you are hard-bricked and that your device won't be able to be repaired)
(and a happy new year )
Click to expand...
Click to collapse
Yes i root my device before i installed twrp , when i boot my tablet twrp boots up the screens goes alll blurry / fuzzy with colors then it becomes normal recovery menue i installed twrp touch so i should be able to touch the setting but i can't i press the power button and a fuzze Unlock with ''Slide to unlock'' comes up but i can't slide to unlock it.. Oh yeah and it is upside down so i have to turn my tablet upside ..
I think[I know] i installed the wrong version of twrp which does not work for my device, Is there any way i could get rid of this recovery or factory reset?
What kind of tablet do you have? Does the bootloader support fastboot? If so you should be able to flash the proper recovery. If not does adb work when in recovery? You may be able to change it here. Also your OEM may have a download mode to flash firmware, this may be another option.
Sent from my Nexus 4 using XDA Premium 4 mobile app
I have a Allwinner A31 table to be precise ubonton u705a
I have tried adb but it just says [waiting for device] so I guess ADB does not work.
I don't know anything about bootloaders it had an option of fastbooting in the power menus if that means anything sorry for my lack of description Sent from my R800i using xda app-developers app
viperasap said:
Yes i root my device before i installed twrp , when i boot my tablet twrp boots up the screens goes alll blurry / fuzzy with colors then it becomes normal recovery menue i installed twrp touch so i should be able to touch the setting but i can't i press the power button and a fuzze Unlock with ''Slide to unlock'' comes up but i can't slide to unlock it.. Oh yeah and it is upside down so i have to turn my tablet upside ..
I think[I know] i installed the wrong version of twrp which does not work for my device, Is there any way i could get rid of this recovery or factory reset?
Click to expand...
Click to collapse
I think the easiest would be to just install the right version, the same way you installed this version. You are still able to connect your device to your pc, I guess, so you should be fine. To go back to your stock recovery, find the stock recovery for your device (you can probably find it somewhere here on the forums), and flash it.
Hope this works and good luck
pep18 said:
I think the easiest would be to just install the right version, the same way you installed this version. You are still able to connect your device to your pc, I guess, so you should be fine. To go back to your stock recovery, find the stock recovery for your device (you can probably find it somewhere here on the forums), and flash it.
Hope this works and good luck
Click to expand...
Click to collapse
Ok thank you for your help I figured it out thanks !! Happy new year 2014!
viperasap said:
Ok thank you for your help I figured it out thanks !! Happy new year 2014!
Click to expand...
Click to collapse
Glad I could help, you too!
Hi i need help, my oneplus x has the screen unstable. When you unlock i cannot access anything that the image begins to move and change color as shown in the video. Recovery mode works well and the image does not move, but I tried to change the system but exactly the same thing happens. I've also gotten twrp and rom but it works the same. Sorry for my english
https://drive.google.com/open?id=15yH3uabKfxfgqtkdV5xr0WsVSvEq9Tsc
It happens even when the phone isn't charging I presume ?
Did you try to re flash over the full rom build?
https://www.oneplus.com/fr/support/softwareupgrade/details?code=3
If so, I'm afraid it's a hardware problem and it's about to die...
Frankly it appears to be a hardware problem. It's strange that the recovery mode works fine though.
Kéno40 said:
It happens even when the phone isn't charging I presume ?
Did you try to re flash over the full rom build?
https://www.oneplus.com/fr/support/softwareupgrade/details?code=3
If so, I'm afraid it's a hardware problem and it's about to die...
Click to expand...
Click to collapse
If it works the same, less in recovery mode and loading without starting
SpaceDye said:
Frankly it appears to be a hardware problem. It's strange that the recovery mode works fine though.
Click to expand...
Click to collapse
https://drive.google.com/file/d/1E_VYrizu0ryXeeKTWtRF8gqjVp9MJdWO/view?usp=drivesdk
I also think it's hardware but I want to discard and know what it's due to or what happens to it.
Motherboard that start failing....
Kéno40 said:
Motherboard that start failing....
Click to expand...
Click to collapse
https://drive.google.com/open?id=17dGg1usfUz4ioSR_K0RXlZqTNrWWxMem
Yes, there's no doubt.