sorry for my bad english
I have a mi 8 lite stopped in fastboot mode. All in the beginning I thought of sharing the rom using mi flash but I tried on 2 different PCs and the phone in mi flash is not found but only fastboot mode.It does not give me access to recovery even if I put it with fastboot flash recovery twrp.img. This problem came to me after I installed the dtbo.img file for updating the hz of the display. I searched online to see if I found the mi 8 lite dtbo.img but I have not found it so if the reader has an mi 8 lite and you can send me his dtbo.img it would give me a great hand and if there are other methods write below
Ps:i have installed driver for mi phone phone
Русский?
Related
Hello all,
I have a Xiomi MI 4 and now it is not booting. When i power on , it only shows blinking MI logo. I can't access the recovery mode but i can access the fastboot mode. I tried to flash stock rom via MiFlash app but it shows "flash partition error". I use cmd to unlock bootloader and it shows done! Then i tried to flash recovery and it again shows done. But i can't access the recovery yet. Phone only shows blinking MI logo! Anyone please help me:crying:.....
Hello guys,
I have a redmi note 4G that it's stuck at Mi logo and won't enter recovery and have the bootloader locked.
Is anyway i can flash this device ?
Thank you.
Yes , if your device is shown inside minimal FastBoot & ADB Terminal you can flash the same img files from the stock firmware which you dad before this problem or use latest img files from latest stock firmware for your device .
Another way is TestPoint , EDL mode search on the internet for your model and flash stock firmware with Xiaomi Mi Flash ...
I have a Redmi 8a(olivelite). Yesterday I tried official TWRP of Redmi 8(olive) in my Redmi 8a. I did not flash the TWRP, I just booted into TWRP using this command "fastboot boot twrp.img". It worked and booted into twrp. Touch was working. MTP was working. So then I tried to flash Redmi 8(olive) rom in Redmi 8a using TWRP. it did not flash. wiped DATA, CACHE, DALVIK CACHE, SYSTEM. MTP stopped working and I could not copy files to Redmi 8a while in TWRP. So I then tried to reboot to bootloader but as soon as hit reboot bootloader in TWRP the phone went black and was not turning on. Phone was also not recognized by PC. I googled and found edl thing. I opened the back part of my phone and used pins to get to edl(also removed battery connector). Then I tried mi flash tool. phone was recognized as COM[NUMBER] device in flash tool. Did not work. shows cannot receive hello packet. Tried other methods found on the internet. like- changing port, usb 2.0, changing device(laptop, desktop), reboot after installing drivers. still could not receive hello packet. Then I tried Qfil and Miracle tool. Still no progress. Then I changed mi flash tool to MiFlash20181115.zip this one. It showed unauthorized to download.
Current Status of Phone-
Phone does not boot or power on, cant get to fastboot mode or recovery. Can boot to edl mode.
Device Model-
Redmi 8a(olivelite). 3gb indian variant.
Any help would be appreciated.
You just flash stock vbmeta
Then flash stock recovery
It's problem your hanset not booting fastboot then try edl cabels or search for edl point on Google
Sent from my Redmi 8A using Tapatalk
rehan992 said:
You just flash stock vbmeta
Then flash stock recovery
It's problem your hanset not booting fastboot then try edl cabels or search for edl point on Google
Sent from my Redmi 8A using Tapatalk
Click to expand...
Click to collapse
Can not flash vbmeta and stock recovery because device can not boot into fastboot. The phone is only recognized as COM after edl point spark.
Flash fastboot rom in edl mode with miflash tool
Sent from my Redmi 8A using Tapatalk
rehan992 said:
Flash fastboot rom in edl mode with miflash tool
Sent from my Redmi 8A using Tapatalk
Click to expand...
Click to collapse
I tried to flash fastboot rom but mi flash tool says "cannot receive hello packet". then I tried different mi flash tool it says Account not Authorized
AL AMIN KOUSER said:
I tried to flash fastboot rom but mi flash tool says "cannot receive hello packet". then I tried different mi flash tool it says Account not Authorized
Click to expand...
Click to collapse
Disconnect your battery cable and try flash
If it's not happen then go to service center
Sent from my Redmi 8A using Tapatalk
In fastboot Identifies the device? If yes, then sew through the console
Sorry for my bad english. I am not literate and in Russian )))
I could not solve the problem by myself so I went to an authorized mi customer care. They solved the problem. Now the phone boots and works fine. They charged 500 BDT or around 6 USD(according to exchange rate of today).
SOLVED
I could not solve the problem by myself. So I went to an authorized mi customer care. They fixed the phone. Now it boots and bootloader stayed unlocked. They charged 500 BDT(around 6 USD by exchange rate of today).
AL AMIN KOUSER said:
I could not solve the problem by myself. So I went to an authorized mi customer care. They fixed the phone. Now it boots and bootloader stayed unlocked. They charged 500 BDT(around 6 USD by exchange rate of today).
Click to expand...
Click to collapse
Congratulations ! Good luck. )) Your act was rash
Sorry for my bad english. I am not literate and in Russian )))
Hello someone could help me please, a few days ago by accident I erased the entire operating system of my redmi note 10 and it only stayed in fastboot mode I tried to install the rom from my flash but in the end it released an error also tried by xiaomi tools 2v and also at the end it got stuck at 4.99% and went back to fastboot mode and also tried running the flash_all.bat file and it got stuck when fastboot flash super came out and it no longer loaded and closed
did you tried mi flash tool to install stock rom
chocek said:
Hello someone could help me please, a few days ago by accident I erased the entire operating system of my redmi note 10 and it only stayed in fastboot mode I tried to install the rom from my flash but in the end it released an error also tried by xiaomi tools 2v and also at the end it got stuck at 4.99% and went back to fastboot mode and also tried running the flash_all.bat file and it got stuck when fastboot flash super came out and it no longer loaded and closed
Click to expand...
Click to collapse
Use latest mi flash tool, exract your fastboot rom in your C:/ drive folder. Then use only "clean all" option in the bottom right corner of mi flash tool, when flashing your rom.
try watching this video tutorial
Good day, I need an explanation please... I wanted to install Lineage os on my Xiaomi it didn't work, I have unlocked bootloader everything, I wiped the data and the whole system and tried to flash Lineage os again but it still didn't work. So I tried to flash the flood firmware and the phone is stuck on the miui logo and won't boot. I rebooted the phone into recovery mode and factory reset the phone and tried to install the phone again but the phone still stuck on the miui logo so I booted the phone into fastboot mode and typed fastboot erase system and fastboot erase cache and tried to flash the same firmware and it didn't help. I'm using a firmware that I've used before and when I got my phone into bootloop that firmware saved me but not now. So I tried to install a different version of firmware for my Xiaomi and still the same problem the phone is still stuck on the miui logo. Any explanation? Sorry for my bad English, I'm writing through a translator.
I now searched XDA. I found out that many people have the same problem as me. It's probably a hardware problem
[GUIDE] No Auth Xiaomi Redmi 8A, Redmi 8A Dual and Redmi 7A EDL Flashing using Mi Flash Tool.
[GUIDE] Xiaomi Redmi 8A EDL Flashing using Mi Flash Tool. (Also works for Redmi 7A). This tutorial has been successfully tested with Redmi 8A, Redmi 8A Dual and Redmi 7A all featuring a Qualcomm SDM439 Chipset. WARNING: DO NOT SHORT THE TEST...
forum.xda-developers.com