On Angler (Nexus 6p) I flashed the latest stock rom. (After a complete wipe) Afterwards I flashed TWRP and unzipped Magsik. Subsequently I did update to the latest version. After that I changed the packagename of Magsik manager. Furthermore I installed Xposed framework. Afterwards I enabled root hide for the TAN app:
https://play.google.com/store/apps/details?id=com.starfinanz.mobile.android.dkbpushtan&hl=en
This software is meant to give you the tan without using sms services.
Still, the app crashed right at the start without any error notification. Android Version is 8.1 and Magsik is v16. While I did the test, the bootloader was unlocked and TWRP was still the recovery. Can these two things affect the verification of the Banking app? I tried this several times ago in the past, but I was never to make this app running.
If anyone would be able to give helpful advice here, it would be very much appreciated.
Best,
scarline
I have heard that DKB Tan2Go does not work with newer Android versions like Oreo 8.1.x at all.
I can also confirm that. I tried it on a Sony cellphone. The cellphone was not rooted and with a completely new and 'clean' ROM. It was to no avail.
A friend has been forced to buy a chip reader. I am fortunate to be able to use normal TAN lists at the moment. If the DKB tries to exclude me from online banking, I will change the bank.
DKB Tan2Go seems to be one of the worst and most insecure apps ever. The reviews in Google PlayStore confirm this conclusion.
Maybe there will be a solution someday?
DKB TAN2go works with Magisk:
1. Install the TAN2go app (but don't open it)
2. Add the TAN2go app in Magsik Manager in the menu "Magisk Hide"
3. Reboot the phone (I don't know if this is necessary)
4. Open TAN2go, works fine.
**** DKB and this stupid security features which bring absoltuely no security.
That's exactly what I tried - without success. I read that it only worked with an old, obsolete version of Tan2Go. However, I could not find this version and I'm not sure if it still works at all. Did you have the latest version of Tan2Go from Google PlayStore? According to DKB, the recent Tan2Go does not work with devices that was once rooted or had a CustomROM. Even if you go back to stock the Root Counter changed and DKB Tan2Go will never work on this device. Unfortunately, I have to confirm that.
I am working on it to change the bank, because of that.
exaveal said:
DKB TAN2go works with Magisk:
**** DKB and this stupid security features which bring absoltuely no security.
Click to expand...
Click to collapse
Indeed!
Yes, I have installed the latests version of LineageOS, latest version von Magisk and the latests version of the TAN2go app.
I tried that to no avail. I heard once the root counter has a value other than 0, one can't go back. Probably it is also the Sony bootloader and it is different with other devices?
exaveal said:
Yes, I have installed the latests version of LineageOS, latest version von Magisk and the latests version of the TAN2go app.
Click to expand...
Click to collapse
I have a Xiomi Mi5 rooted with Magisk and Tan2go used to work for the last year or so. But yesterday I tried to make a transaction and BOOM! App crashed without an error message. Tried to use a newer Magisk, tried reinstalling the App, nothing helped.
The worst thing is that I do not know if some of my programs have a battery checker or a screen reader plugin that I am not aware of, or if Tan2Go suddenly detects my root. Regardless, crashing without an explanation is like the worst programming practice ever.
Since I do not need this kind of ****e in my life I will probably change Bank, I mean what good is an internet Bank if you cannot do transactions over your mobile device?
Well, willy-nilly I try to use the only other option from DKB: the German TAN Generator. Every other bank equips you with such a device, if they want you to use it. The DKB does not. Actually, I ordered the 3rd TAN Generator and fully paid for it. The first one drains the battery within days. The second one let me type in all the numbers and for no reason the TAN code does not show up on display.
These devices are very annoying anyway, because you have to type in a lot of numbers for every money transfer, the characters are very small (on the laptop) and you have to carry the TAN Generator + the DKB debitcard all the time. Of course this is less secure.
I would change the bank immediately, but want to keep the Visa credit card. I have higher limits on it. That's the only reason. As soon as I found an alternative bank in Europe, I will leave the DKB for good.
It dont worked with Lineage 14.1 but with 15.1 unoffical build on Samsung S4 together with latest Magisk .Rom from here
https://www.cyanogenmods.org/forums/topic/lineageos-15-1-for-galaxy-s4-lte-android-8-1-oreo/
Works for me
Just tried again. It hasn't been working for me in the past. When downloading & opening the app, I had the same problems.
Then I simply followed the above advice: downloading the app again, didn't open it, hide with Magisk, reboot and opened the app - worked well and was able to register for tan2go.
I am using Lineage 16.0 and Magisk v18.0
DKB already updated their app - they patched it
kyodhin said:
Just tried again. It hasn't been working for me in the past. When downloading & opening the app, I had the same problems.
Then I simply followed the above advice: downloading the app again, didn't open it, hide with Magisk, reboot and opened the app - worked well and was able to register for tan2go.
I am using Lineage 16.0 and Magisk v18.0
Click to expand...
Click to collapse
The app version from September (version 2.3.0) does work, the newer app version from 4.4.19 (version 2.4.0) does not...
Tested working combination: Magisk 18.0, Magisk Manager 6.1, DKB version 2.3.0
Can confirm that, working with magisk and 2.3.0. Not working anymore with 2.4.0.
I have another Tan app from another bank and with the new version it also stops working. Seems that magisk is now quite to popular and they working on better detection. Magisk hide is useless on the recent version of these tan apps.
That really sucks. No way to get 2.4.0 working. Hoping for a magisk fix. Are the magisk developer informed that there are problems with magisk hide? I think others will have similar problems too.
I successfully got 2.4 working again, after it got updated and refused to start.
Following the steps from this post made it work again (German):
https://www.android-hilfe.de/forum/...trotz-magisk.901517-page-2.html#post-11532359
I installed Magisk 19.0 (beta) but contrary to the above mentioned post I left my Magisk modules installed as they were before the update.
Both the Magisk modules as well as TAN2Go 2.4 are now working again.
I had to authenticate the new TAN2Go installation by adding it as a "new device" using SMS verification.
I was not able to get it to run with the above mentioned instuctions.
Device: Nexus 6P (angler), ROM: LineageOS 15.1-20190419, Magisk modules: MagiskHide Props Config (required for ctsProfile test), Busybox for Android NDK (required for MagiskHide Props Config).
DKB Tan2Go crashes immediately when started.
Same for me. The above instruction doesn't work.
Downgrade to 2.3.0
I experienced the same problem. Had to do an important transfer yesterday. And of course Tan2Go-2.4.0 crashed. I'm using Magisk v18.1.
Today I did a downgrade via Aptoide to 2.3.0 and had to register the smartphone again via SMS. This worked without any problems.
To avoid the update problem and keep with 2.3.0:
Start Titanium Backup
Select the DKB Tan2Go App
Long click on the App.
Connect with Google Play Store (forced)
Long click the App again.
Disconnect from Google Play Store
Hope it helps. I don't think there's much to change in the DKB Api. I'll use 2.3.0 until they block it via the API.
If more people confirm the proposed solution with Magisk v19, I'll try it maybe.
I got it working with v2.4.0, but don't know which step was the solution. Switching to the "Canary" channel of Magisk or hiding the Magisk Manager in the settings. I think the last one was the solution.
Can you guys try and give feedback?
Don't forget to uninstall and install the app before testing again.
musv said:
If more people confirm the proposed solution with Magisk v19, I'll try it maybe.
Click to expand...
Click to collapse
I have the same issue. Hopefully it can be fixed via Magisk one day.
Worked with T2G 2.4, 19, 7.1.1
Walhalla said:
I got it working with v2.4.0, but don't know which step was the solution. Switching to the "Canary" channel of Magisk or hiding the Magisk Manager in the settings. I think the last one was the solution.
Can you guys try and give feedback?
Don't forget to uninstall and install the app before testing again.
Click to expand...
Click to collapse
Hi Walhalla,
Hi All
In Settings "General">"Hide" via other apk name it worked for me. V19.0, v7.1.1, Tan2Go 2.4
I have been trying different method on installing rooted apps bbut anything that would related to system configuration would end up with message of "app is not installed" in installation. Including "Viper4, Youtube Vance, Google Camera".
However I'm able to install viper through magisk module. Just install inside the magisk. And it works. But no luck finding the other two apps.
Any suggestions guys?
Im rooted.
Disabled Google App Protection
I installed YouTube vanced (non root) with microG which works perfectly fine.
I was looking for screen recording solutions for recording some PUBG content, ones that captured gameplay sounds (internal audio). Google restricts apps from doing so, often banning developer accounts when devs host an app that captures system audio. People kept mentioning that MIUI's inbuilt screen recorder has an option to record system internal audio, but I could not locate that option.
As it turns out, the in-built app is version 1.4.1. I tried out the most recent v1.4.9, but it simply force closed. The next version, i.e. v1.4.4 works perfectly and also features "System Sound" as an option for Sound source.
You can download the v.1.4.4 release from APKMirror.
For non-MIUI users, LineageOS 16 features its own screen recorder app that also does the same. I haven't tried it yet, but that is an option.
Still looking for a way to reliably record high quality video + internal audio + mic, but at least we have a partial solution.
This doesn't work anymore in v10.2.8.0 because the system Screen Recorder version is v1.4.6 and Android refuses to install older versions.
justin97530 said:
This doesn't work anymore in v10.2.8.0 because the system Screen Recorder version is v1.4.6 and Android refuses to install older versions.
Click to expand...
Click to collapse
Yes it doesn't. The alternative is to root your phone, uninstall the system apk, install the older apk as a system app.
@a.cid How to root Redmi Note 7?
Also, POCO F1 has just got the update that enables recording of system sounds. How can we check if Redmi is also planning that update for Redmi Note 7? is there a way?
a.cid said:
Yes it doesn't. The alternative is to root your phone, uninstall the system apk, install the older apk as a system app.
Click to expand...
Click to collapse
So glad I did it when I had v10.2.6.0
a.cid said:
Yes it doesn't. The alternative is to root your phone, uninstall the system apk, install the older apk as a system app.
Click to expand...
Click to collapse
Can you please guide me on how to do the same?
I have rooted my Redmi Note 7 successfully. But I am not able to install it as a system app.
Can you tell me the steps?
screen recording with system sounds is working on latest developer rom available for redmi note 7 pro. check it here - https://youtu.be/r2JXb6Hvlxw
shaanu said:
screen recording with system sounds is working on latest developer rom available for redmi note 7 pro. check it here -
Click to expand...
Click to collapse
Do u have another link it seems to be removed
Mobizen screen rec. works perfetly for me .... (i'm on miui.eu beta 9.8.1 and rooted by magisk 19.3 )
Hello
My camera app is version 2.2.1.A.0.10 and i want to a newer camera version.But if I try to install some camera apks it just show :"App cannot be instaled".
So I tried istall apk as system app with root (put apk file into root/system/app folder (I've installed Selfie portrait or Camera Pro this way)). I uninstall my camera app, reset my phone and check camera app. The new version was installed but when i wanted to open it, it just showed:" Unkown error". So i came back to older camera version (i backup it).
Does anyone know how to install newer camera version ?
have a nice day
Endiaron said:
Hello
My camera app is version 2.2.1.A.0.10 and i want to a newer camera version.But if I try to install some camera apks it just show :"App cannot be instaled".
So I tried istall apk as system app with root (put apk file into root/system/app folder (I've installed Selfie portrait or Camera Pro this way)). I uninstall my camera app, reset my phone and check camera app. The new version was installed but when i wanted to open it, it just showed:" Unkown error". So i came back to older camera version (i backup it).
Does anyone know how to install newer camera version ?
have a nice day
Click to expand...
Click to collapse
Dude don't play with that stuff... Camera version is device generic only !! Last time I did this on my xz , it was the last time I was ever able to use the camera