Related
Hello XDA .
Since kernel options are limited on our phones I decided to release my personal kernel builds for anyone who wishes to use it .
I am just an amateur kernel builder who can read commits and understands how linux generally works . I used to make kernels for the Galaxy nexus if anyone here remembers back that far lol .
Anyways . I started with android-msm-marlin-3.18-oreo-mr1 and added all the goodies back in .
- For Android 9
- Patched to Linux 3.18.123 + October 2018 Security Updates
- Built with Linaro 7.3-2018.04-rc2~dev GCC
- Big Core Overclocked to 2.3 GHz
- Little Core Overclocked to 1.9 GHz
- GPU Overclocked to 710 MHz
- Slimbus Overclocked
- Voltage Control ( /sys/devices/system/cpu/cpu"N"/cpufreq/UV_mV_table )
- Thermal Control ( /sys/module/msm_thermal/parameters/ )
- IO-Schedulers : Noop Deadline CFQ BFQv8r12 Test-io Fiops Sio+ Tripndroid Zen Maple ROW VR
- CPU governors : Sched Performance Interactive Conservative OnDemand Userspace Powersave Blu_Active ZZmove ElementalX Chill
- TCP Congestion Controllers : cubic reno bic CDG westwood highspeed hybla htcp vegas veno scalable lp yeah illinois sociopath agileSD china
- Boeffla Wakelock Blocker ( NO wakelocks are blocked by default )
- Fingerprint Boost ( like touchboost for fp sensor ) ( Must Be set manually via command line : echo "1" > sys/kernel/fp_boost/enabled )
- Adreno Boost and Adreno Idler driver
- FSYNC control
- Color control ( savoca )
- Force fast charge
- KSM enabled
- Zen-Tuned
- ZSWAP enabled ( can be enabled/disabled on the fly via command line : echo "Y" > /sys/module/zswap/parameters/enabled
other ZSWAP tunables can be found in sys/module/zswap/parameters/ )
- CleanCache and FrontSwap enabled
- Transparent HugePage Support enabled
- Zcache enabled ( off by default )
- Flar2's Sound control
- Flar2's Wake/Sleep control ( d2tw s2w s2s gestures )
- SafteyNet patched
- MAC address randomization ( off by default ) ( proc/sys/dev/cnss/randomize_mac )
- High Brightness Mode supported
- exfat file system support
- WireGuard supported
- Various performance minded commits
As I said before :
- I do this for fun -- ( I am married and have 2 little kids and a full time job )
- This is my personal kernel ( I'm not looking for feature requests )
ALL credit should go to those who wrote the commits ( my commit history is correct in authorship )
FLASH INSTRUCTIONS :
- flash kernel.zip via TWRP recovery .
( This kernel should install over any ROM's stock boot.img // If you have another custom kernel installed besides this one then first flash the ROM's boot.img again before flashing this kernel )
- Grab Fire Extinguisher && Prepare for your phone to melt through the floor
- If previous step fails to happen : don't blame me
DOWNLOADS
CURRENT VERSION :
R25-NSFW-Kernel-PIE
MD5- 31a8687ab8f46abd309ea254048a1c7d
OLD VERSIONS :
https://www.androidfilehost.com/?w=files&flid=237278
CHANGELOG
- R1
- Initial Release
- R2
- Some updates from MSM android 4.4 kernel tree to MM/ and to memcontrol
- R3
- Linux 3.18.89. Switched to UKSM
- Also zswap can now be enabled/disabled on the fly insted of just at boot
- R4
- Frontswap and cleancache inline with linux 4.15
- added new zswap allocator "z3fold" can compress 3 pages at once vs 2 for zbud
- can now choose zswap compressor lz4 or lzo
- selinux improvements
- binder is inline with msm-kernel-4.4
- updates to android low memory killer (Adaptive LMK)
- updates to mm/compaction
- R5
- Linux 3.18.90
- patched zram to linux 4.4
- some mm updates
- R6
- All behind the scenes changes
- updates to sysfs and arm64
- updated blu_active
- various other updates from Linux 4.x+
- R6.1
- fix for NX-Camera app
- R7
- Linux 3.18.91
- Jan 2018 security updates
- R8
- Added ZZmove governor VR io-scheduler and sociopath TCP controller
- Minor code change to io-schedule switcher
- R9
- added Adreno Boost parameters to msm-adreno-tz GPU freq governor
- added TCP congestion controllers agileSD and CHINA.
- a few other small commits that should go unnoticed
- R10
- Linux 3.18.92
- minor updates to fscrypt and ext4 as well as lz4
- R11
- added voltage control for msm 8996
- updated zram to use crypto compression
- GPU is now overclocked to 729 MHz max
- added mac randomization from copperhead os . it is disabled by default
- R12
- Replaced Sched with SchedUtil governor
- Experimental EAS changes
- R13
- Added Chill governor and re-included sched gov
- Added Thermal Control via sysfs
- updated UKSM ( now works alongside KSM )
- added CAKE net packet scheduler
- added configurable printk ( can be enabled/disabled via sysfs )
/sys/kernel/printk_mode interface
- updated Adreno Idler
- removed powersave governor ( unusable IMO )
- various minor updates
- R14
- Linux 3.18.93
- Reduced max GPU freq to 710MHz ( from 729MHz )
- R15
- February kernel security updates
- added savoca's Advanced Color Control ( KCAL )
- re-enabled sched governor
- R16
- Linux 3.18.94
- updated Low Memory Killer
- switched back to Linaro GCC
- R17
- updated wake gesture timing for 1000Hz
- removed direct references to Hz in i2c hwmon gsi ipa mdss & fbdev
- updated Adreno Idler tunables
- updated Slimbus overclock ( from @poondog :good: )
- few compiler warning fixes
- R18
- Linux 3.18.95
- updates to binder from mainline linux
- various commits
- R19.1
- Linux 3.18.98
- added non-overclocked version (NO-OC)
- updated sdcardfs and some various other small commits
- R20
- Linux 3.18.99
- March security updates
- R21
- Linux 3.18.100
- Linaro 7.3.1 GCC
- Added P-dev branch version ( P1 )
- R22
- Linux 3.18.105
- April security updates
- vibration adjustment fixed
- R23
- Linux 3.18.108
- May Security updates
- disabled CPU input boost
- R24
- Linux 3.18.122
- Android 9 support
- sept security updates
- R25
- Linux 3.18.123
- Oct security updates
- vibration control fix (flar2)
Happy Flashing
NSFW-kernel, Fireball for the Google Pixel XL
Source Code: https://github.com/bsmitty83/NSFW-Pixel-XL
Man I miss the dirty v
---------- Post added at 10:30 AM ---------- Previous post was at 10:26 AM ----------
bsmitty83 said:
Hello XDA .
Since kernel options are limited on our phones I decided to release my personal kernel builds for anyone who wishes to use it .
I am just an amateur kernel builder who can read commits and understands how linux generally works . I used to make kernels for the Galaxy nexus if anyone here remembers back that far lol .
Anyways . I started with @DespairFactor 's Sharkey kernel source -- any base modifications that are in that kernel are present here .
- Patched to Linux 3.18.82
- Built with Linaro 4.9 GCC
- noop deadline cfq bfq test-io fiops sio sio+ tripndroid zen maple ROW
- all TCP controllers enabled
- Fingerprint Boost ( like touchboost for fp sensor )
- FSYNC control
- Force fast charge
- IO stats / Add Random disabled
- Gentle Fair Sleepers disabled
- KSM enabled and optimized
- Sound and color control from Sharkey kernel
As I said before :
- This is my personal kernel ( I'm not looking for feature requests )
- I am just a kanger -- ALL credit should go to those who wrote the commits
FLASH INSTRUCTIONS :
- fastboot flash factory boot.img via bootloader before flashing kernel.zip via TWRP recovery
DOWNLOAD-
View attachment 4336963
or
DROPBOX
Happy Flashing
XDA:DevDB Information
NSFW-kernel, Kernel for the Google Pixel XL
Contributors
bsmitty83
Source Code: https://github.com/bsmitty83/marlin
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Public-1
Stable Release Date: 2017-11-19
Created 2017-11-20
Last Updated 2017-11-19
Click to expand...
Click to collapse
Didn't you bring us f2fs?
DR3W5K1 said:
Man I miss the dirty v
---------- Post added at 10:30 AM ---------- Previous post was at 10:26 AM ----------
Didn't you bring us f2fs?
Click to expand...
Click to collapse
For the Galaxy Nexus ? Yeah , I was part of that bring up lol . Credit for that should go to @aosp and @osm0sis , as well as the omap guys .
Sent from my Pixel XL using Tapatalk
bsmitty83 said:
For the Galaxy Nexus ? Yeah , I was part of that bring up lol . Credit for that should go to @aosp and @osm0sis , as well as the omap guys .
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
The good ole days lol. You're going to like the pixel. Give dirty unicorns a flash if you get bored.
Would i be able to use flashfire to install if I'm just stock 8.0 rooted with no TWRP? Or am I just better off installing TWRP and using that instead?
chachh said:
Would i be able to use flashfire to install if I'm just stock 8.0 rooted with no TWRP? Or am I just better off installing TWRP and using that instead?
Click to expand...
Click to collapse
I would say it should be safe to use flashfire , I personally use fastbooted TWRP to flash , just because usually I am by my laptop when flashing anyways. I don't have TWRP Installed on my phone. I'd say to be safe , have TWRP and a computer handy just in case [emoji39]
Also i haven't had any problems with this kernel booting stock Oreo with root . I've been using a variation for weeks now and so far so good .
Sent from my Pixel XL using Tapatalk
bsmitty83 said:
I would say it should be safe to use flashfire , I personally use fastbooted TWRP to flash , just because usually I am by my laptop when flashing anyways. I don't have TWRP Installed on my phone. I'd say to be safe , have TWRP and a computer handy just in case [emoji39]
Also i haven't had any problems with this kernel booting stock Oreo with root . I've been using a variation for weeks now and so far so good .
Click to expand...
Click to collapse
Cool I'll give it a shot later tonight, thank you
Smitty I know you aren't taking request but maybe the unlocked bootloader safety net patch? If you included that I would actually give Oreo a whirl. Haven't even used it lol
DR3W5K1 said:
Smitty I know you aren't taking request but maybe the unlocked bootloader safety net patch? If you included that I would actually give Oreo a whirl. Haven't even used it lol
Click to expand...
Click to collapse
It should be included .
Remove verifiedbootstate flag from proc/cmdline
https://github.com/bsmitty83/marlin/commit/6fac65585e1b04fa27561aba24b2762f0f1f8b0a
If your needing Android pay , it crashes for me with superSu and suhide , but I really didn't mess with it because I don't use it much if ever. I mean it's nice , but it's just as fast using my debit card .
Sent from my Pixel XL using Tapatalk
bsmitty83 said:
It should be included .
Remove verifiedbootstate flag from proc/cmdline
https://github.com/bsmitty83/marlin/commit/6fac65585e1b04fa27561aba24b2762f0f1f8b0a
If your needing Android pay , it crashes for me with superSu and suhide , but I really didn't mess with it because I don't use it much if ever. I mean it's nice , but it's just as fast using my debit card .
Sent from my Pixel XL using Tapatalk
Click to expand...
Click to collapse
Magisk 14.1,14.2, and 14.3 have been working well for me on nougat. Im hiding root for a couple banking apps.
Thank you Smitty!
Just gotta find the time too setup the sdk on my new PC
I'm intrigued by this kernel but I can't find any information on what's included in the kernel its built on? Could anyone help me find this information please?
spr33 said:
I'm intrigued by this kernel but I can't find any information on what's included in the kernel its built on? Could anyone help me find this information please?
Click to expand...
Click to collapse
the base kernel source is used for Uberstock ROM
(I used the Oreo branch instead of the Nougat branch though.)
--based on msm-kernel-3.18.52-oreo-R3 . It included wake/sleep gestures sound control the linaro optimization flags some of the IO-schedulers ( BFQ zen SIO and FIOPS . Also color control as well as a few other performance related commits .
I added the rest .
bsmitty83 said:
the base kernel source is used for Uberstock ROM
(I used the Oreo branch instead of the Nougat branch though.)
--based on msm-kernel-3.18.52-oreo-R3 . It included wake/sleep gestures sound control the linaro optimization flags some of the IO-schedulers ( BFQ zen SIO and FIOPS . Also color control as well as a few other performance related commits .
I added the rest .
Click to expand...
Click to collapse
Thanks for that. One last question, does it have schedutil governor?
spr33 said:
Thanks for that. One last question, does it have schedutil governor?
Click to expand...
Click to collapse
Yes , it's included as well
Sent from my Pixel XL using Tapatalk
Thanks for sharing because you're right, there is not a lot for us to flash to our devices. But I guess that's the price of stability. Going to take NSFW for a spin.
Bryanx86 said:
Thanks for sharing because you're right, there is not a lot for us to flash to our devices. But I guess that's the price of stability. Going to take NSFW for a spin.
Click to expand...
Click to collapse
yeah I agree . Plus the OP3 development seems to be much more active .
But thats ok since there are so many devices using the same SOC and kernel version there lots of features for me to import to try to keep this phone as current as possible .
And for me reading the linux 3.18 MSM kernel source is much easier than OMAP4 linux 3.0 lol. what a mess .....
Enjoy . hope it runs well for you . I shoud have a new version out soon . I added the Adreno Idler driver and pushed up to linux 3.18.83
also added the blu_active governor . testing it out now
OP Updated with current features and I uploaded a new version .
Updated to Linux 3.18.83
Added adreno gpu idler driver
Added blu_active CPU gov
Added io scheduler switch
Few commits for performance and USB
Happy flashing ....
Sent from my Pixel XL using Tapatalk
Thank you! Going to give this a flash!
Set blu_active, any suggestions on Governor options? Or should I use all default.
Thanks in advance!
Sent from my sailfish using XDA Labs
Nil253259 said:
Set blu_active, any suggestions on Governor options? Or should I use all default.
Thanks in advance!
Sent from my sailfish using XDA Labs
Click to expand...
Click to collapse
usually I keep governor settings stock myself . Also I still use interactive , just my personal preference
Sent from my Pixel XL using Tapatalk
Argon kernel, for Android 8.1 & 9.0 ROM's (bacon).
Disclaimer:
use this kernel at your own risk. Flashing it without any knowledge of what you're doing may brick your device. I'm not responsible for any software/hardware damage.
Argon v11 is the last version for Oreo! Starting from v12 only Pie is supported.
Changelog:
v16.1 (August 11th)
support for OTG Y cables
minor bug fixes and security patches
Previous releases:
v16 (August 2nd)
kernel code base synced with LineageOS
lots of misc. bug fixes and small improvements
sdfat driver now replaces both vfat and exfat
some f2fs backports
v14 (April 24th)
built with the newest GCC toolchain for ARM
dynamic management of dirty page writebacks
some useless drivers have been removed (this might give us a few additional MB's of RAM)
a couple of improvements for the random number generator driver
IRQ threading is enabled by default (as suggested by Con Kolivas)
v13 (March 31st)
memory bandwidth overclock
lots of small updates and improvements (mainly for the assembly memory routines)
a few updates for the impulse CPU governor
new TCP congestion control algorithm: 'ascarex'
v12 (March 10th)
official Pie support (LineageOS 16 & Lineage-based ROMs)
small bug fixes and misc. tweaks
a few updates for the "impulse" CPU gov
memory management backports from Linux 3.8
lighter kernel (some debugging options have been turned off)
v11 (January 27th)
built with the newest ARM toolchain
power-efficient workqueues have been implemented in a couple of places
minor source updates & fixes
DDR bandwidth boost has been fixed
important updates for Sultan's CPU boost driver
v10.2 (January 19th)
synced with our LineageOS kernel (mainly bug fixes and security patches)
v10.1 (January 12th)
some source updates and bug fixes
v10 (December 29th)
built with the latest GCC 8 toolchain by Arm
some debugging options are disabled (this might slightly improve performance)
lots of small bug fixes and source updates
v9 (December 11th)
zzmoove governor updated to the latest version
boosted L2 cache frequencies
Spectrum support
Sultanxda's simple thermal driver (replaces Intellithermal)
miscellaneous kernel updates, backports and fixes
dynamic fsync has been (temporarily?) removed
v8.1 (November 23rd)
lots of kernel source updates & fixes
exFAT/sdFAT support
new CPU governors: intellimm, yankactive, zzmoove and impulse
dynamix fsync (disabled by default)
v8 (November 4th) - diff against v6:
built with GCC 8
old charging drivers (these are stable and work properly for everybody)
several improvements for the audio drivers, the memory management libraries, the CPU boosting driver, f2fs, zram, etc.
latest sdcardfs fixes from Google
Intellithermal (with configurable throttling threshold)
latest security fixes
CPU overclocking (disabled by default)
updated bricked hotplug
UKSM with automatic toggling (wip, it's not fully working as of now)
async fsync for ext4 and f2fs
v7.7 (October 23rd)
rebased on top of v7 + all the extra changes of v7.6
msm_hotplug removed (bricked is the default hotplug)
v7.6 (October 23rd)
completely rebased on top of Argon v6.1 (which seems to be the latest stable release) + the following changes
built with GCC 8.2
MSM hotplug enabled by default
cpu_input_boost improvements
latest sdcardfs updates
several other security fixes and improvements
v7.1, v7.2, v7.3, v7.4, v7.5 (October 10th - 11th - 15th - 16th - 17th)
stability fixes
v7 (October 9th)
msm_hotplug replaces bricked as the default hotplug
optimizations for msm8974 boards
older charging drivers from LineageOS 14.1 (they seem to fix all charging problems)
some more minor tweaks, fixes and optimizations
v6.1 (September 30th)
mpdecision is replaced by bricked hotplug by default
v6 (September 27th)
stability fixes
AIO optimizations reverted (this fixes filesystem errors for ext4 users)
slimbus overclock
several improvements and updates (for the ext4 fs, the LMK and many other drivers)
charging current interface
cpu_input_boost by Sultanxda (it replaces CAF's cpu_boost)
v5 (September 19th)
zram is supported
AIO optimizations & backports
minor tweaks and updates
v4 (September 15th)
Per-process reclaim
minor updates and improvements (including security fixes)
v3 (September 8th)
DDR bandwidth boost on screen unlock
misc. kernel updates, fixes and improvements
v2 (August 31st)
several secuirty fixes and kernel source updates
f2fs driver updates
new CPU hotplug: bricked hotplug
power-efficient workqueues are implemented in more drivers
v1 (August 24th)
based on idprophecy's kernel, thus it should be compatible with any Oreo ROM
built using QUVNTNM-TC, based on GCC 7.3.x
CPU underclocking (268,8 MHz)
several compiler optimizations enabled
sound contol by franciscofranco
lots of miscellaneous fixes and improvements
sysfs interface for Gentle Fair Sleepers and Arch power
power-efficient workqueues
Downloads
Latest version: here.
Argon kernel on MEGA
Argon kernel on AndroidFileHost
Thanks to:
@idprophecy
@dorimanx
@faux123
@Sultanxda
@CertifiedBlyndGuy
@osm0sis
@franciscofranco
@GalaticStryder
@nikhil18
the LineageOS team
and all the other authors of the hundreds of commits in Argon's github repo!
XDA:DevDB Information
Argon kernel for Oneplus One, Kernel for the OnePlus One
Contributors
Tomoms
Source Code: https://github.com/Tomoms/argon_kernel
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 16.1
Stable Release Date: 2019-08-11
Created 2018-08-24
Last Updated 2019-08-11
Reserved
How to set up the charging speed interface in Kernel Adiutor?
First thing, download the attached zip and decompress it. You'll find two .json files in it, place them in your internal storage and open KA. Go in the "Custom controls" tab, tap on the "+" button, choose "Import" and select the first of the files you downloaded, then import the second one too. Done! You can now delete the two files.
Keep in mind that the "0" value means that the standard charging logic will be used, and that the AC charging speed cannot be set to a value lower than 200 mAh, even though the slider allows you to set any value. If you set any value between 1 and 199, the driver will fallback to 200.
working fine with AEX 5.7.
is it compatible with oxygen os blobs or sultan blobs?
Running well for me on AEX 5.7.
antfior93 said:
is it compatible with oxygen os blobs or sultan blobs?
Click to expand...
Click to collapse
Starting from Oreo, all ROMs implement Sultan's camera, thus this kernel only supports Sultan's camera HAL.
New version is available
It's an important updates that brings lots of improvements (mainly "under the hood"), for more info I suggest you to check my Github repo!
Really nice work. Don't want to sound rude or something but is there a chance of getting a Pie build? ?
rolarocka said:
Really nice work. Don't want to sound rude or something but is there a chance of getting a Pie build?
Click to expand...
Click to collapse
Most probably, this kernel already works on Pie
You just need to flash it, then flash the Kernel Permissive Patcher (link - needed to set SELinux to Permissive before booting the OS) and you should be good to go. If you try, let me know the result!
What is the stock setting this kernel comes in? I want to try it but don't want to use root (for now). So I'm wondering what settings are default. Would kinda make this a flash and forget kinda kernel
twowheeler said:
What is the stock setting this kernel comes in? I want to try it but don't want to use root (for now). So I'm wondering what settings are default. Would kinda make this a flash and forget kinda kernel
Click to expand...
Click to collapse
The stock settings are kind of good. Not the best you could get, but close (I'll tweak the default configuration a little more in the future). If you're using idprophecy's ROM you will end up having maple as the default I/O scheduler, while if you're using other ROMs, I'm pretty sure you won't. Anyway, if you flash this kernel, I'm sure you'll benefit from the general improvements I implemented, which do not need any tweak to be enabled.
Works well on following ROMs;
-AOSiP 20180825( Argon v1 )
-TugaPower O25 ( Argon v2 )
Hi i installed it over AEX 5.7 . it works but charging is buggy. Keeps disconnecting and connecting .
tamboli007 said:
Hi i installed it over AEX 5.7 . it works but charging is buggy. Keeps disconnecting and connecting .
Click to expand...
Click to collapse
I have the same thing on all ROMs based on the LOS core. And this kernel is based, as I understand it, on the LOS core ... For example, with FranoKernel there are no such problems.
tamboli007 said:
Hi i installed it over AEX 5.7 . it works but charging is buggy. Keeps disconnecting and connecting .
Click to expand...
Click to collapse
MrYuraB said:
I have the same thing on all ROMs based on the LOS core. And this kernel is based, as I understand it, on the LOS core ... For example, with FranoKernel there are no such problems.
Click to expand...
Click to collapse
I experience the same issue when using a certain non-original (yet good-quality) cable. The weird thing is that if I charge the phone while it's turned off, it charges perfectly. Anyway, I can try to fix this issue. It shouldn't be difficult. I'll keep you informed.
Good to see you're still contributing for Bacon.
Tomoms said:
I experience the same issue when using a certain non-original (yet good-quality) cable. The weird thing is that if I charge the phone while it's turned off, it charges perfectly. Anyway, I can try to fix this issue. It shouldn't be difficult. I'll keep you informed.
Click to expand...
Click to collapse
Yesterday I tried to send you message, but it is why it is not sent... I agree
I've uploaded a new kernel!
Argon v3 is a small yet important update: it brings DDR bandwidth boost on screen unlock (basically, the RAM bandwidth is boosted when you unlock your phone so that opening an app immediately after waking the device from idle takes less time) and some general fixes & improvements for the kernel. More details are available on Github, as usual
Tomoms said:
I've uploaded a new kernel!
Argon v3 is a small yet important update: it brings DDR bandwidth boost on screen unlock (basically, the RAM bandwidth is boosted when you unlock your phone so that opening an app immediately after waking the device from idle takes less time) and some general fixes & improvements for the kernel. More details are available on Github, as usual
Click to expand...
Click to collapse
I've been loving the Kernel on AEX 5.7, but I've needed to reboot a few times because the screen won't turn on, or the screen has frozen.
Do you think that could be from the default underclock?
@Ruggerxpunk Same issue on my side since V2 version, but I don't have any logs cause I'm not using it at this moment.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Introduction
Ahoy everyone,
I decided to share my personal custom kernel with all of you. The main reason i started developing this kernel is to balance performance / battery / security and also add features.
I believe i have included most of the usually requested features. If your feature is not included you can ask for it and i will try to include it as long as you don't ask for ETA's. I am a student and i do this on my spare time.
Pie kernel is based on LineageOS 16.0 sources for beryllium and is compiled
with SdClang which is Qualcomm's LLVM Compiler for extra performance. [EOL] - Final Version is 3.1
10 kernel is based on LineageOS 17.1 source for beryllium and is compiled
with latest sources from LLVM for Clang 11.
So let's jump to the interesting part!
Sphinx Pie Kernel Features - v3.1
Sphinx Pie Kernel Features
Compiled with Dragon Toolchain based on Clang 9.0.0 with GCC 10 and optimized for SnapDragon 845
Upstreamed to 4.9.194
Merged CAF Tag LA.UM.7.3.r1-07900-sdm845.0
Merged Latest Lineage 16.0 commits
Makefile Optimizations
Novatech 9.6.20
WireGuard Support
Dynamic Stune Boost v3
GPU Underclock to 180 Mhz
CRC Check Disabled
Pass SafetyNet without Magisk / Root
Boeffla Wakelock Blocker
AdrenoBoost v2.2 Support
Adreno 630 Nap Mode
Pixel 3 Energy Model
Hight Brightness Mode Support
Sound Control
IR Camera for MIUI based Roms
Support sdFAT Filesystem v2.1.8
Support exFAT Filesystem
Support F2FS File System
Support NTFS File System
Frandom Random Generator
TTL Target
IP Mangle
Fsync Control
DriveDroid Support
DTS X Eagle Driver
Exposure Adjustment Driver (FlickerFree)
Reduced Latency
Config HZ -> 300
Disabled Gentle Fair Sleepers
Atheros 9 Wireless Cards Support
Ralink 27xx / 28xx / 30xx Wireless Cards Support
Kcal Advanced Color Control
K-Lapse v5.0
Vibration Control
LED Notification Control
USB Fast Charge up to 900 mAh
LZ4 Compression Algorithm by default
Backlight Minimum Brightness Control
Power Efficient Workqueues
mac80211 Injection (Kali Nethunter Support)
I/O Schedulers: Zen v2, Maple, Fiops, Sio, Noop, Deadline, Cfq, tripandroid, Anxiety, bfq
TCP Congestion Algorithms : cdg, westwood, bbr, sociopath
Pre-Configured Flash and Forget
Zipped up with AnyKernel2
Sphinx 10/11 Kernel Features - v3.2+
Compiled with latest Clang 11
Upstreamed to Linux 4.9.261
Merged latest CAF tag
Rebased on Lineage 18.0 sources
Merged Latest Lineage 17.1 commits
WireGuard Support
GPU Underclock to 180 Mhz
CRC Check Disabled
Latest Patches for SafetyNet Flags
Boeffla Wakelock Blocker
AdrenoBoost v2.2 Support
Adreno 630 Nap Mode
Sound Control
Support sdFAT Filesystem v2.1.8
Frandom Random Generator
TTL Target
IP Mangle
Expose FPS interface
Fsync Control
DriveDroid Support
DTS X Eagle Driver
Exposure Adjustment Driver (FlickerFree)
Reduced Latency
Simple Low Memory Killer
Disabled Gentle Fair Sleepers
Atheros 9 Wireless Cards Support
Ralink 27xx / 28xx / 30xx Wireless Cards Support
Kcal Advanced Color Control
K-Lapse v5.0
Vibration Control
USB Fast Charge up to 900 mAh
LZ4 Compression Algorithm by default
Backlight Minimum Brightness Control
Power Efficient Workqueues
HID Patch for 4.9 Kernels
mac80211 Injection (Kali Nethunter Support)
I/O Schedulers: Noop, Deadline, Cfq, tripandroid, Anxiety, bfq
TCP Congestion Algorithms : cdg, westwood, bbr, sociopath
Pre-Configured Flash and Forget
Zipped up with latest AnyKernel3
Notes
I bear absolutely no responsibility. If you brick your device. If you are not sure what a kernel is, how to flash it or how to restore your phone in case something goes wrong then do NOT proceed.
Moreover, you should flash this kernel only over the stock kernel that came with your Rom.
Downloads -
Pie EOL - Final Version 3.1
Sphinx 3.1: https://www.androidfilehost.com/?fid=1899786940962594232
10/11 - Current
Sphinx v3.6 : https://www.androidfilehost.com/?fid=2188818919693754613
/-----------------------------------------------------------------------------/
I have dedicated countless hours developing this kernel so if you like my work consider buying me a coffee to help me stay awake and keep improving Sphinx.
Click Here for Coffee
/-----------------------------------------------------------------------------/
For Support, Updates, Questions, Releases regarding Sphinx join t.me/SphinxKernel
XDA:DevDB Information
Sphinx Kernel, Kernel for the Xiaomi Poco F1
Contributors
milouk
Source Code: https://github.com/milouk/Sphinx-Beryllium
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: 3.6
Stable Release Date: 2020-03-13
Created 2018-11-02
Last Updated 2020-03-13
Pocoooooooooo F1 - Donations
If you see your name and not your xda name PM me
Donations made by:
@JJ111
@tnicko
Jerzy Gawryluk
Georgios Bitloglou
@tnicko
@bla.blub
@reg66
@Lazy Rich
@BakaPhoenix @Mrdream94
@emmanuelo7
Pascal Bourasseau
@niccio67
Ramgonda Desai
@MP2005
@2WildFirE
@Dan_Jacques
@Bonz
@rodries
@fwb1973
@Lycidias
@dodjob
@makimac
@_phil07_
Arge_Canna
@SSmanBuraQ
@fmcheetah
@Migueliyo98
Andrea Nastro
Joao Martinho
Thanks again guys!
Changelog
Sphinx v1.7
-Upstreamed to Linux Version 4.9.135
-Merged ext4 upstreamed commits
-Merged Lineage 16.0 Upstream commits
-Now Compiling with Uber Toolchain 6.4.1
-Added Zen v2 I/O Scheduler
-Added TCP Congestion Algorithms (bic, cdg, cubic, westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois) default is cdg
-Improved msm_performance
-Enabled USB Fastcharge up to 900 mAh
-Added blu_schedutil
-Makefile Optimizations
-Added LED Notification Control
-Enabled LZ4 Compression Algorithm for Zram
-Now Sphinx comes Pre-Configured out of the box for balance
-Support F2FS File System
Sphinx v1.8
-Compiled with Uber Toolchain 9.0.0 tuned for Snapdragon 845
-Added Adreno Idler
-Added Frandom Random Generator
-Tuned-Up Westwood TCP
-Added Simple Low Memory Killer
-Replaced Cpu_boost with Cpu_Input_Boost driver
-Adapted Dynamic Schedtune Boost to Cpu_Input_Boost
-Added Devfreq_boost driver
-Added alucard_schedutil
-Added darkness_schedutil
-Added pwrutilx_schedutil
-Zram Upstream Updates
-Crypto: Now compiling with armv8.2-a flag
-Updated WireGuard
-Added DCTCP TCP Algorithm
-Added BBR TCP Algorithm
Sphinx v1.8.7
-Removed Adreno Idler
-Compiled with GNU GCC 8.2.1
-Removed Simple Low Memory Killer
-Removed Cpu_Input_Boost / Devfreq_Boost
-Fixed ALL Reboot Issues
-Improved KCAL Control
Sphinx v1.9
-Now Building with Custom Uber Toolchain 9.0.0 with various optimizations for SnapDragon 845
-Upstreamed from CAF to 4.9.136 , 4.9.137, 4.9.138, 4.9.139 and 4.9.140
-Added Tripandroid I/O Scheduler
-Added Sociopath TCP Algorithm
-Massively Tuned Up Westwood and set it as default
-Improved Wakelock Blocker
-Reduced a lot Latency
-Upgraded to AdrenoBoost v2.1
-Updated WireGuard
-Merged CAF Tag CAF LA.UM.6.3.r4-05800-sdm845.0
-Set the Kernel's Base Frequency to 500 HZ
-Support NTFS File System
Sphinx v2.0
-Upstream to 4.9.141, 4.9.142, 4.9.143
-Updated TouchScreen to 8.12.6
-Underclocked GPU to 180 MHz
-Set Initial GPU Frequency to 180 MHz
-Improved Memcpy spped by 15%
-Added Sound Control (Only Headphones and Mic)
-Updated LZ4 Module
-Fixed ExFAT and NTFS File Systems
-Decreased the Time the GPU needs to enter Idle Module
-Improved Battery Drop Issue (NOT fixed, just improved)
-Merged some SnapDragon 845 Patches
-Removed Pwrutilx, Alucardsched, Darkness_Sched and Blu_schedutil as they were Unstable.
-Blocked Some extra Wakelocks
-Now Sphinx comes PRE-CONFIGURED out of the box. Just Flash And Forget (You need Magisk)
-Updated WireGuard
-Merged Lineage Latest Changes
-Some Battery Saving Patches
-Much more minor things --> Check GitHub
Sphinx v2.1
-Upstreamed to 4.9.145
-Re-Based Sphinx Kernel tree from scratch based on CAF Pie Tag
-Wifi working on all Roms
-Touch Firmware from 8.12.10
-Pre-Configured settings optimized a bit more
-Merged Latest Lineage Changes
-Updated WireGuard
-Many more bug fixes and Optimizations --> GitHub
Sphinx v2.2
-Upstreamed to 4.9.147
-Updated WiFi Driver from CAF Tag LA.UM.7.3.r1-0660-sdm845.o
-Merged Latest Lineage OS Changes
-Built with SdClang for maximum optimization and performance
-Merged Touch Firmware 8.12.20
-Updated AnyKernel2
-Updated Schedutil Governor
-Merged some cpufreq patches from Upstream
-Merged a commit for smoother Frequency downscaling
-Cleaned and Improved pre-configured Settings
-Fixed the bug during Installation for users with 9.0 and not 9
-Updated WireGuard
-Many more bug fixes and Optimizations --> GitHub
Sphinx v2.3
-Linux Upstream to 4.9.148
-Merge CAF Tag 'Merge tag ''LA.UM.7.3.r1-06600-sdm845.0' into kernel.lnx.4.9.r11-rel ~8.000 Changes
-Merge Lineage OS Changes
-Compiled with LATEST sdClang 6.0.9 from Qualcomm
-Merged 8.12.27 Touch Firmware
-Many ufs (mobile ssd) improvements
-Added Anxiety I/O Scheduler
-Improved Dyanamic Schedtune frequency scaling
-Patched some memory Leaks
-Some Battery improvement commits
-Updated WireGuard
-Many more changes --> check GitHub
Sphinx v2.4
-Upstream CAF/Linux version to 4.9.151
-Merged some commits for performance improvement
-Added High Brightness Support
-Merged some commits that improved wakelocks
-Enabled Nap Mode for Adreno 630 GPU
-Adjusted Energy Model to be inline with Pixel 3
-Added BFQ I/O Scheduler v8r10
-Fixed issue with stuck frequencies
-Massive refinement of pre-configured settings. (Note 1)
-Removed TouchBoost control from userspace
-Merged many Scheduler commits
-Merge Some EAS improvement commits
-Merged Touchscreen Drivers from Official Xiaomi's Pie Kernel release.
-Merge Lineage 16.0 Changes
-Update WireGuard
-Many more commits --> Check GitHub
Sphinx v2.5
-Upstreamed from 4.9.151 to 4.9.155
-Merged CAF Tag LA.UM.7.3.r1-06700-sdm845
-Merged some Camera improvements (not feature improvements...code improvements. Sphinx is not a camera app)
-Updated Touch Firmware to 9.1.24
-Update display panel drivers from MiCode/dipper-p-oss release
-Updated Wifi drivers
-Updated Sound drivers
-Updated SdFat Driver to v2.1.8 and merged some upstream commits from 4.13
-Updated BFQ I/O Scheduler to v8r12 and also merged mnany fixes
-Improved Cpu-Boost driver
-Reduced the log spam to improve performance
-Merged a commit for entering sleep state quicker
-Merged a commit that will make face unlock much quicker
-Merged a commit that will fix frequency scaling. So now governor's frequency change requests will be followed.
-Added Toggle for disabling newly added devices
-Disabled some TCP Congestion Algorithms to make the image lighter
-Enabled Support for Ralink 27xx / 28xx / 30xx external wifi adapters.
-Merged some Power Efficient Workqueue Changes that can save some battery.
-Fixed a stupid warning that was in dmesg.
-Cleaned the script and also now you do NOT need Root (Magisk) for pre-configured settings to apply. (thanks to @rodries)
-Updated WireGuard Backend
-Merges Lineage's latest sources.
-Many more changes --> Check GitHub
Sphinx v2.6
-Upstreamed to Linux 4.9.162
-Merged CAF TAG LA.UM.7.3.r1-06900-sdm845.0
-Fixed Carrier Video Calling
-Now compiling with Dragon Toolchain based on Clang 9.0.0
-Merged some upstream F2FS commits
-Fixed F2FS Verity.
-Merged some Power Efficient Workqueue commits to save some battery
-Improved Sociopath TCP Algorithm
-Merged some TCP improvement commits
-Enabled MIN_CAPACITY_CAPPING feature
-Added an extra option for Dynamic Schedtune Boost Duration in /sys/module/cpu_boost/parameters/dynamic_stune_boost_ms and improved the code.
-Merged some more Dynamic SchedTune Boost improvement commits.
-Fixed HDR Issue after watching Youtube
-Added K-Lapse Feature
-Merged Lineage 16 Branch
-Updated WireGuard
-Improved Default Settings and fixed some of them not sticking.
-Many More --> Check GitHub
Sphinx v2.7
-Upstreamed to Linux 4.9.166
-Improved Frequency switching
-Improved Bluetooth performance
-Improved K-Lapse
-Added some more Power Efficient Workqueues
-Merged some ufs improvements
-Checked out ion to Android Q Developer Preview 1
-Fixed usb tethering.
-Merged some wakelock power saving commits
-Merged Lineage 16 Branch
-Updated WireGuard
-Many More --> Check GitHub
Sphinx v2.8
-Upstreamed to Linux 4.9.172
-Merged CAF Tag LA.UM.7.3.r1-07400-sdm845.0
-Added MSM Thermal Driver
-Fixed many Clang warnings
-Enabled Ultra Power Saving Mode for the Display Panel
-Increased CMA Memory from 200 MB to 296 MB
-Improved Boot Speed
-Merged many f2fs improvement commits
-Merged some UFS improvement commits
-Merged some Camera driver commits
-Exposed Drop Caches
-Merged Lineage 16 Branch
-Updated WireGuard
-Many More --> Check GitHub
Sphinx v2.9
-Upstream to Linux 4.9.184
-Merged CAF Tag LA.UM.7.3.r1-07900-sdm845.0
-Merged all the latest Security Patches
-Updated Wifi Drivers
-Adapted Some Compilers Flags to make it easier for other developers to compile Sphinx
-Updated TouchScreen Drivers from MIUI 9.6.20
-Merged some GPU fixes
-Updated K-Lapse to Version 5.0
-Fixed some memory leaks and race conditions
-Reverted Simple Thermal Driver (too many issues)
-Fixed random reboots issues
-Fixed Big Cluster stuck at 825 Mhz
-Merged Xbox Controller Drivers and more Gamepad Drivers
-Updated WireGuard Backend
-Merged Lineage 16.0 Branch
Sphinx v3.0
- Upstreamed to Linux 4.9.189
- Now compiling with my Custom GCC-10 Toolchain, built with optimization flags.
- Added Many SDM 845 specific optimization flags
- Merged Lineage 16.0 latest changes
- Merged Many SchedTune Commits
- Added VMStat and set it to 10
- Further Reduced Dirty Rations
- Merged Some UFS upstream Commits
- Improved Random Driver
- Turned off a lot of useless debug info
- Enabled RCU Boost
- Merged CFQ and other I/O improvement Commits
- Merged a bunch of sched Commits
- Added and Enabled SchedTune Assist Driver
- Added and Enabled CPUSet Assist Driver
- Merged some Workqueue commits.
- Added DTS X Eagle Driver.
- Added PSI.
- Fixed Phone rebooting into Fastboot Mode on MIUI Beta.
- Added DriveDroid Support for the first time for Pocophone.
- Added Pocket Judge Driver (this driver determines whether your phone is in your pocket and saves some extra battery)
- Merged a bunch o memory upstream commits.
- Updated WireGuard Backend.
- Many Many Many more commits --> Check GitHub.
Sphinx v3.1
- Upstreamed to Linux 4.9.194
- Merged Lineage 16.0 and 17.0 latest changes
- Updated my GCC 10 Toolchain to yesterdays commits
-Fixed Random Reboot issue
-Android 10 Support
- Added HID Mouse and Keyboard Support (you might need to set kernel to permissive for this to work)
-Zipped up with latest Anykernel3 thanks to @osm0sis
-Updated WireGuard Backend.
Sphinx v3.2
- Now Supporting only Android 10 (Q)
- Upstreamed to Linux 4.9.217
- Compiled with latest Clang 11
- Merged Latest Lineage 17.1 Sources
- Updated Wireguard backend
- Add Simple Low Memory Killer
- Zipped up with latest Anykernel3
- Applied new patches for SafetyNet Flags
- Many Many Many more commits --> Check GitHub.
Sphinx v3.3
- Upstream to Linux Kernel 4.9.225
- Merged Latest Lineage Changes
- Add initial HID Patch (I have NOT tested it)
- Update to latest Q Xiaomi Sources
- Fixed Auto Brightness and other display issues
- Memory and Cache Optimizations
- Merged latest updates for Simple Low Memory Killer Driver
- Updated Wireguard Kernel Backend
- Many Many Many more commits --> Check GitHub.
Sphinx v3.4
- Upstream to Linux Kernel 4.9.229
- Merged Latest Lineage Changes
- Fixed touch issues with FTS Panels
- Fixed High Auto Brightness
- Merged latest updates for Simple Low Memory Killer Driver
- Updated Wireguard Kernel Backend
- Many Many Many more commits --> Check GitHub.
Sphinx v3.5
- Upstream to Linux Kernel 4.9.237
- Merged Latest Lineage Changes
- Merge tag 'LA.UM.8.3.r1-08100
- Merge tag 'LA.UM.8.3.r1-08500-sdm845.0
- Rebase lineage 18.0
- Support for Android 11
- Improve power efficient workqueues
- Expose interface for showing FPS on compatible roms
- Merge latest LOS changes
- Remove some ethernet drivers and added usb ethernet drivers
- Merged latest updates for Simple Low Memory Killer Driver
- Updated Wireguard Kernel Backend
- Many Many Many more commits --> Check GitHub.
Sphinx v3.6
- Better Android 11 support
- Use WireGuard from Upstream 5.4
- Upstreamed to Linux 4.9.261
- Merged latest CAF tags
- Merged latest Lineage Sources
- Picked some LMK Driver update commits
- Many Many Many more commits --> Check GitHub.
Previous Versions
Sphinx 1.7:
https://www.androidfilehost.com/?fid=11410932744536993761
Sphinx 1.8:
https://www.androidfilehost.com/?fid=11410963190603845145
Sphinx 1.8.7:
https://www.androidfilehost.com/?fid=11410963190603854120
Sphinx 1.9:
https://www.androidfilehost.com/?fid=11410963190603858063
Sphinx 2.0:
https://www.androidfilehost.com/?fid=11410963190603869686
Sphinx 2.1:
https://www.androidfilehost.com/?fid=11410963190603876440
Sphinx 2.2:
https://www.androidfilehost.com/?fid=11410963190603880155
Sphinx 2.3:
https://www.androidfilehost.com/?fid=11410963190603888715
Sphinx 2.4:
https://www.androidfilehost.com/?fid=11410963190603903270
Sphinx 2.5:
https://www.androidfilehost.com/?fid=1395089523397888802
Sphinx 2.6:
https://www.androidfilehost.com/?fid=1395089523397909716
Sphinx 2.7:
https://www.androidfilehost.com/?fid=1395089523397929964
Sphinx 2.8:
https://www.androidfilehost.com/?fid=1395089523397958919
Sphinx 2.9:
https://www.androidfilehost.com/?fid=6006931924117911422
Sphinx 3.0:
https://www.androidfilehost.com/?fid=6006931924117935490
Sphinx v3.1 - Final Sphinx for Pie
https://www.androidfilehost.com/?fid=1899786940962594232
Sphinx v3.2
https://www.androidfilehost.com/?fid=4349826312261759378
Sphinx v3.3
https://www.androidfilehost.com/?fid=4349826312261822112
Sphinx v3.4
https://www.androidfilehost.com/?fid=8889791610682883785
Sphinx v3.5
Sphinx-v3.5.zip | Kernel by milouk for Poco F1
Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.
www.androidfilehost.com
Version 1.7
Ahoy Ladies and Gentlemen.
Time for new version!
Changelog:
1) Upstreamed to Linux Version 4.9.135 - Better Security / Stability / Performance
2) Merged ext4 upstreamed commits - Better System Performance
3) Merged Lineage 16.0 Upstream commits - Better Stability / Battery / Performance
4) Now Compiling with Uber Toolchain 6.4.1 - Better Battery/System Performance
5) Added Zen v2 I/O Scheduler - Better I/O Performance
6) Added TCP Congestion Algorithms (bic, cdg, cubic, westwood, htcp, hstcp, hybla, vegas, scalable, lp, veno, yeah, illinois) default is cdg - Better Internet Performance
7) Improved msm_performance - Better Performance
8) Enabled USB Fastcharge up to 900 mAh - Note (1)
9) Added blu_schedutil - Note (2)
10) Makefile Optimizations - Better Performance
11) Added LED Notification Control- Note (3)
12) Enabled LZ4 Compression Algorithm for Zram - Better Battery / Performance
13) Now Sphinx comes Pre-Configured out of the box for balance
14) Support F2FS File System - If Rom Supports it -
Notes:
Note 1: This is USB Fast Charge which means it works ONLY when you charge from a computer. The default output was 500 mAh and now it's 900 mAh (which is the maximum a usb port can support)
Note 2: This is a new EAS Governor ported from blu_spark Kernel for OnePlus 6. Currently it is almost the same with the schedutil governor from Pixel 3
Note 3: Many of you made some comment about the LED Notification being brighter etc. Now you can configure it yourself. THOUGH there is not interface for that in ANY App, you need to do it yourself.
Specifically:
Code:
* /sys/class/leds/white/device/led_fade (rw)
0 : blink
1 : fade (default)
* /sys/class/leds/white/device/led_intensity (rw)
0 : stock intensity
1-100 : 0% to 100% of stock intensity
Note: Does only work for static led, not fading/blinking !!!
* /sys/class/leds/white/device/led_speed (rw)
0 : stock speed
1 : continuous notification light
2-12 : 2 = very slow to 20 = very fast
I have listened to your requests to bring Sphinx to Poco and did everything in my powers to satisfy most of you and ensure this version is stable so if you enjoy this version don't forget to buy me a coffee
Cheers :highfive:
Wow, Amazing. Can i flash this on stock miui beta 8.11.1 also
Great work.
Edit :
Just installed , super smooth. Everything works great so far. Antutu 291328. Not sure if it is placebo but face unlock seems to be faster, haven't been able to see lock screen in the trials I have done so far.
Rom is stock beta 8.11.2 and no root yet.
Will root and tweak with suggested ex kernel manager and report
sanjay0501 said:
Wow, Amazing. Can i flash this on stock miui beta 8.11.1 also
Great work.
Click to expand...
Click to collapse
Of course you can mate
frequency on big cluster is max on blu schedutil whilst on omnirom
thanks sounds really good gonna try it right after i flashed 8.11.1
Skinpipe said:
frequency on big cluster is max on blu schedutil whilst on omnirom
Click to expand...
Click to collapse
Its how it works. It maxes the big but it lowers little cores. Currently its almost a direct copy from Pixel's 3 schedutil. If you dont like this behaviour i would suggest regular schedutil. Regarding blu_schedutil you can read more on its original thread "blu_spark kernel for OnePlus 6"
milouk said:
Its how it works. It maxes the big but it lowers little cores. Currently its almost a direct copy from Pixel's 3 schedutil. If you dont like this behaviour i would suggest regular schedutil. Regarding blu_schedutil you can read more on its original thread "blu_spark kernel for OnePlus 6"
Click to expand...
Click to collapse
ill check it out im familiar with eng.stk' work
Skinpipe said:
ill check it out im familiar with eng.stk' work
Click to expand...
Click to collapse
Awesome. Its a direct port from his kernel.
milouk said:
Awesome. Its a direct port from his kernel.
Click to expand...
Click to collapse
you absolutely sure its supposed to stay at 2803mhz constantly that is a huge power drain and makes no sense?
Skinpipe said:
you absolutely sure its supposed to stay at 2803mhz constantly that is a huge power drain and makes no sense?
Click to expand...
Click to collapse
What im saying is that i picked the code EXACTLY like it is. Its 99% the same as Pixel 3 schedutil. Also youll notice that the battery drainisnt at all as huge as you think.
Morever while merging there wasnt even one conflict the code is 100% correct and exactly as eng.stk wrote it. Ifnyou have questions about the code im not the person to ask no offense. Im not taking the credits nor the blame for someone elses work. I just think its a nice addition especially for users that need performance.
Also as you may have noticed its not the default gov for that exact reason.
**Also of course there is always the possibility to remove a feature if i see no one finds it usefull.
Btw i always listen to feedback and try to satisfy most of you.
Cheers
milouk said:
What im saying is that i picked the code EXACTLY like it is. Its 99% the same as Pixel 3 schedutil. Also youll notice that the battery drainisnt at all as huge as you think.
Morever while merging there wasnt even one conflict the code is 100% correct and exactly as eng.stk wrote it. Ifnyou have questions about the code im not the person to ask no offense. Im not taking the credits nor the blame for someone elses work. I just think its a nice addition especially for users that need performance.
Also as you may have noticed its not the default gov for that exact reason.
Cheers
Click to expand...
Click to collapse
understood, my apologies
Skinpipe said:
understood, my apologies
Click to expand...
Click to collapse
Hahaha didnt mean to offend you at all what i was tryin to say is that its not my code so i cant guarantee what its supposed or not supposed to do. Apologies if i offended you mate
milouk said:
Hahaha didnt mean to offend you at all what i was tryin to say is that is not my code so im cant guarantee what is supposed or not supposed to do. Apologies if i offended you mate
Click to expand...
Click to collapse
i was sincere not sarcastic no offence taken, honest:good:
Foourck yesssss ? you are in the Poco team ???? really really looking forward to your awesomeness on the S845 ??.
dodjob said:
Foourck yesssss ? you are in the Poco team ???? really really looking forward to your awesomeness on the S845 ??.
Click to expand...
Click to collapse
Oooouuu heello my friend. Nice to see you here i hope i wont let you down
Introduction post looks AWESOME, this is what I've been waiting for - great kernel. Flashing right away.
DxT Kernel
* Your warranty is now void.
* I am not responsible for bricked devices, strained relationships,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this kernel
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*
"This is a user friendly thread, all your suggestions are important to us and will be taken into consideration.."
This kernel is only for Payton
Features
1. Built with Clang 13 + Polly optimize
2. Merge Linux kernel and driver as soon as possible
3. DxT is CAF based and uptodate with latest tag
4. Fixed all compile-time warnings
Other Features
1. kcal, sound gain control
2. CPU OC using some sdm660 frequencies ,[Little cores = 2.0ghz ,Big cores = 2.5ghz]
3. Added & Updated LZ4 for ZRAM (Enabled by Default)
4. AnyKernel3 Installer Script
5.Compiled With Latest Proton CLANG 12
6. Exfat driver comes from arter97
7. Available I/O scheduler: bfq, cfq(default), deadline
8. Available TCP congestion algorithm: westwood(default)
9. Merge some optimization commits from Sultan
10. Kernel-level cpusets parameter optimization, optimize CPU core calls
11. Latest Wireguard driver
12. Adreno GPU boost
13. Some other visible and invisible optimizations...
Due to different moto action implementation on different roms i made two versions
* normal version support roms like superior,pixel experience,msm-xtended,ancient
* L version support roms like LOS,crdroid,havoc,derpest
DOWNLOAD
DxT v4.2
DxT v4.2-L
DxT UC
OTA SUPPORT:
# DxT Kernel FKM Manager Support
This kernel has FKM Manager support for autoflash updates directly from the app.For this to work you must import the configuration link in the section "Flasher" of the app:
Then you must select the option: "Import a kernel download configuration"
This are the URLs for the two versions,just copy,paste and save. (You must add and save one first and if you want both versions available add the other after)
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
Telegram Group
Use the app EXKM, FK Manager, kernel adiutor or smartpack to tweak the kernel!
special thanks to all contributators
attack11, nathanchance , joshuous , akhilnarang , flar2 , kerneltoast , GuaiYiHu , Pzqqt
if u like my works u can donate
[email protected] - upi
https://www.paypal.me/cool585 -paypal
XDA:DevDB Information
DxT kernel, Kernel for the Moto X4
Contributors
dhinesh_cool
Source Code: https://github.com/DhineshCool/Dxt_payton
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: v4.2
Created 2020-06-22
Last Updated 2021-07-25
## DxT Changelogs ##
v4.2
*upstreamed to v4.276
*merged latest caf tags
*latest proton clang
*improved cpu frequency
*clean up rarely working freq
*improved cpu idle
*fixed battery drain on idle
*removed prlmk to prevent twrp crash
*more code cleanup fro stability
V4.1
*Fixed battery drain issue
*Fixed some bugs
v4.0
*upstreamed to v4.270
*latest proton clang
*fully rebase
*rework thermal engine
*rework ram-managment
*lot see my git
ota json has been changed
DxT = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt.json
DxT-L = https://raw.githubusercontent.com/DhineshCool/Dxt_downloads/new/dxt-L.json
v3.6
*upstreamed to v4.258
*latest proton clang
*added anxiety io for faster app opening
*added z3fold from sony
*improved zram performance
*updated ashmem
*fixed some thermal sensor spamming on logcat
*more fixes see my git
v3.5
*upstreamed to v4.253
*Merged tag LA.UM.9.2.r1-02000-SDMxx0.0
*latest proton clang
*Backport new vmalloc for "large performance benefits"
*selinux: Allow audit to be disabled
* page_alloc: double zone's batchsize
*nuke more debloat
*more optimation for better smoothness
now ui will be more smooth
*Updated wireguard to "1.0.20210124"
v3.4
*DxT rebased to caf base
*upstreamed to v4.251
*added persist bug fix
*latest proton clang
*Gpu added 710 freq
*more ion fixes from sultan
*Enable CONFIG_HID_NINTENDO
*Updated wireguard to "1.0.20201221"
v3.3
New Year Release
*upstreamed to v4.248
*latest proton clang
*Gpu oc to 800mhz
*no thermal throttling on gpu
*more ion fixes from sultan
*Updated wireguard to "1.0.20201221"
note uc version pushes to bimonthly release
v3.2
*upstreamed to v4.247
*fix payload calculation
*usb: Add Drivedroid Support
*power: msm-core: Fix mutex not getting unlocked in error path
*cpufreq: stats: optimize proc files
*mm: speed up mremap by 20x on large regions
*work on cpu idle
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clang
**** rework on uc version -it now fully stable no thermal throttling ****
*for the people on xda i released v3.1 on my telegram group , i forget to update on xda
that why directly releasing v3.2
v3.1
*upstream to v4.244
v3.0
*upstreamed to v4.240
*clean up codes
*fixed build warning
*added additional safetynet patch
*rework on thermals
*work on cpu idle
*work on ram managment
*lot of work done see my git
(https://github.com/DhineshCool/Dxt_payton)
*latest proton clan
v2.8
*upstreamed to v4.239
*power: bcl: Improve power efficiency of the workqueue
*used latest proton clang (20201010)
v2.7
*upstreamed to v4.238
*qcacld-3.0: Disable Wifi SAE by default
*optimizations for block
*used latest proton clang (20200930)
v2.6
*upstreamed to v4.237
*New OC for payton (thnx to seba3567)
*Remove some scheduler
*ipc logging disabled
*changes on debugfs
*increase thermal trip points
*optimize gpu
*used latest proton clang (20200923)
Reserved
Much appreciated! I've been wanting a custom kernel for Moto x4!
Running on HavocOS 3.6, seemingly no issues. Definitely feels snappier than the base kernel. Will update after a couple days use.
Thanks again!
Installation instructions?
Zohaibzx said:
Installation instructions?
Click to expand...
Click to collapse
Method 1: Download and install the zip for your rom from the download links, then flash in twrp
Method 2: Use Franco Kernel Manager (requires root) and configure it to use the proper link listed under OTA support. FKM will read any new releases in Dhinesh's github, and update the kernel without a need to flash in recovery.
Hope that helps!
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Flashed using fkm in pixel rom. No issues
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
helo123 said:
Is there anyway to increase the minimum cpu frequency? Whenever i do with fkm it goes back to 300mhz. 300mhz seems too low causing some stuttering while scrolling and in some system animations
Click to expand...
Click to collapse
U can manually set minimum freq
Zohaibzx said:
I tried to flash it in twrp but after flashing the phone just reboots to recovery instead of system. I'm using pixel experience and have used the proper variant of your kernel.
Click to expand...
Click to collapse
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
dhinesh_cool said:
U can manually set minimum freq
Click to expand...
Click to collapse
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
RBJ26 said:
I've tried to flash this (Using FKM Manager), to both of my X4's, one is running Havoc 9, and one is running the latest version of Havoc 10.
Both gave the same error message: "Unsupported device. Aborting..."
Click to expand...
Click to collapse
U need clean flash latest havoc then install
helo123 said:
I tried many apps to change minimum frequency. It still goes back to 300.. only i can change the maximum frequency now
Click to expand...
Click to collapse
Weird I will check ,but lag is due to ram management
I added some tweaks for ram management that was causing lag after sometime for 3gb variant I was aware of this issue I will fix soon
dhinesh_cool said:
Some people had this issue on pe
I don't know why this happening I will try to fix
Tell your variant with ram
Click to expand...
Click to collapse
1900-7 Dual Sim 3GB 32GB
dhinesh_cool said:
U need clean flash latest havoc then install
Click to expand...
Click to collapse
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
RBJ26 said:
Sorry, I should have given more info.
I should have said I had two clean installs of Havoc. On one phone is with Havoc 2.7 (which you say is not supported - OK).
The other phone is a clean install of Havoc 3.6
I have not tried to flash through TWRP would this help? or could there be another issue with my phone.
ETA: I think I understand now. Do you mean without root, etc?
Thanks,
R
Click to expand...
Click to collapse
Flash through twrp
Or u need root to flash via fk manager
dhinesh_cool said:
Flash through twrp
Or u need root to flash via fk manager
Click to expand...
Click to collapse
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
RBJ26 said:
Flashing via TWRP worked fine, Thanks!
For some reason flashing from FKM would not work, even with root.
Click to expand...
Click to collapse
On FKM u need to give proper permission to storage then on flasher u need select storage and give access
ThundeRStormS Galaxy N20 Ultra Exynos family for OneUI Q/R/S
SM-N986B, SM-N985F
Compatibility notes :
Only for Android OneUI Q/R/S roms N20 Exynos family ROMs
AOSP is not supported !!!
In Aroma installer please select ThunderStorms version - only this support Note 20 Ultra.
Kernel features:
- Linux 4.19.87
- Samsung source DEVA9
- Android 11 - OneUI 3.1 (to TS v1.8) / Android 12 - OneUI 4 (from TS v2.0)
- TTL Filter ON
- 64k TCP IP Window
- some debugs off
- USB serial added
- Samsung MTP ON
- Zmalloc page mapping OFF
- Wakelocks added
- Powersuspend 2.0 support
- Wireguard support
- Boeffla wakelocks added
- powereffcient workqueue support in CPU section
- CRC support in MISC section
- Fsync support in MISC section
- Geantle Fair Sleepers support im MISC section
- Frandom support
- Support File Blocker for some tune apps
- OC big CPU at 3016 MHz and Mid at 2600Mhz
- DTS (Device Tree Blob) for temperatures and OC, etc.
- I/O schedulers improvements
- CIFS and NTFS partition support
- disabled some Samsung security and FIPS
- Battery Store support
- Linux source improvements
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Init.d scripts: /vendor/etc/init.d
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- Disabled DVFS clock_lock (now max freq will not drop to 377MHz)
- Added Sustainable GPU freq and set at 455MHz (for doesn't drop freq in gamming below 455MHz)
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial build in kernel / or without Magisk (You can flash it manually - e.g. older version)
- Optimized for battery life
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Compiled via Google Clang 14.0.1 toolchain
- Kernel use an AROMA installer to help guide you through the installation (Thx to EdZamber and yoanf26).
Recommended Apps:
To tweak most of the settings in the kernel, I recommend using ThunderTweaks app.
_________________________________________________
IMPORTANT INFORMATIONS:
1. WARNING: YOU UNDERSTAND THAT INSTALLING CUSTOM FIRMWARE/ROM/KERNEL IS AT YOUR OWN RISK!!!
2. YOUR WARRANTY CAN BE VOID.
"I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed.
Please do some research if you have any concerns about features included in this kernel before flashing it! YOU are choosing to make these modifications, and if you point
the finger at me for messing up your device, You can't blame me for this fact."
3. NO REQUESTS!!!
_________________________________________________
INSTALLATION PROCESS:
FOR STOCK ODEX/DEODEX ROMS - read carefully
FIRST - Clear cache apps like ThunderTweaks, Kernel Adiutor or MTweaks or another one in system app menager !!!
Backup SYSTEM, EFS, DTB, DTBO, DATA and KERNEL as always in TWRP !!!
Download the latest kernel version zip file
Use only not patched (magisk) recovery - kernel has magisk build-in
Flash the CLEAN ROM or Dirty FLash, next restore Your DATA and flash the kernel zip with root or not
Choose aroma selection
Reboot
ThunderTweaks app is installed in Your system.
PROBLEMS / BUGS:
No bugs.
Thanks for reports.
_________________________________________________
CREDITS :
- The Linux Kernel Archive for the Linux Patches https://www.kernel.org/
- Samsung Open Source Release Center for the Source code http://opensource.samsung.com/
- @osm0sis for Android Image Kitchen and anykernel2 https://forum.xda-developers.com/showthread.php?t=2073775
- Magisk and SuperSu Team for root method
- @evdenis Denis Efremov and Cruel Team for source, Samsung updates and help.
- MoRoGoKu, Anan1211, Pascua28, Corsicanu
- @ambasadii
- @edzamber and @yoanf26
- @TheMadScientist, @bartolomeo10, @touseef77, @okij, @enebro77, @tin2404 and tester group.
_________________________________________________
SOURCE of the kernel:
GitHub: https://github.com/ThunderStorms21th/S20-priv
_________________________________________________
Contributors:
@nalas
ThundeRStormS Team
_________________________________________________
DISCUSSION:
Links removed by moderator
_________________________________________________
Version Information:
Statsus : Stable
Current version : AiO v2.1 (All in One)
Release Date : 2022-02-15
_________________________________________________
DONATION:
If you liked my work, you can collaborate by giving thanks and with some donation to continue working hard.
Thank you very much to all.
Link removed by moderator
_________________________________________________
CHANGELOGS & DOWNLOADS in 2nd post
_________________________________________________
DOWNLOADS and CHANGELOGS
Changelogs:
ThunderStorms-Kernel-S-v2.1 : 15.02.2022 for OneUI4.x
- Linux 4.19.87
- Samsung source DEVA9
- Android 12 (S) | OneUI 4
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- Linux source improvements
- READ_AHEAD_KB = 256
- Imported Mali drivers r33p0 from ARM source for ValHall
- ThunderTweaks v1.1.0.5
- Magisk 24.1 Offcial / or without Magisk (24101)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- Clang 14.0.1
- rest like in v2.0.1
ThunderStorms-Kernel-S-v2.0.1 : 24.01.2022 for OneUI4.x
- Linux 4.19.87
- Samsung source CUEL7
- Android 12 (S) | OneUI 4
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- READ_AHEAD_KB = 256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- EdYoBlue kernel installer is removed
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk (23018)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- Clang 14.0.1
- rest like in v2.0
ThunderStorms-Kernel-S-v2.0 : 08.01.2022 for OneUI4.x
- Linux 4.19.87
- Samsung source CUEL7
- Android 12 (S) | OneUI 4
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- READ_AHEAD_KB = 256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- EdYoBlue kernel installer is removed
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- Disabled DVFS clock_lock (now max freq will not drop to 377MHz)
- Added Sustainable GPU freq and set at 455MHz (for doesn't drop freq in gamming below 455MHz)
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk (23016)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.8
ThunderStorms-Kernel-R-v1.8 : 15.12.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- READ_AHEAD_KB = 256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- EdYoBlue kernel installer is removed
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- Disabled DVFS clock_lock (now max freq will not drop to 377MHz)
- Added Sustainable GPU freq and set at 455MHz (for doesn't drop freq in gamming below 455MHz)
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk (23015)
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.7
ThunderStorms-Kernel-R-v1.7 : 23.11.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, SCHED, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- Added CPU tick 25 and 50 Hz - default set at 50 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- ThunderTweaks v1.1.0.4
- Magisk 23.1 Offcial / or without Magisk
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.6
ThunderStorms-Kernel-R-v1.6 : 16.11.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- Added CPU tick 25 and 50 Hz - default set at 25 HZ
- Support Battery Saver Mode
- Support DevFreq MIF min/max frequencies
- ThunderTweaks v1.1.0.3
- Magisk 23.1 Offcial
- support for SM-N986B/SM-N985F (Note 20 Ultra)
- rest like in v1.5
ThunderStorms-Kernel-R-v1.5 : 02.11.2021 for OneUI3.x
- Linux 4.19.87
- Samsung source DUI5
- Some debugs off
- EMS, VM & DTS improvements
- OC CPUs to 3016 MHz - big, 2600 MHz Mid
- Linux source improvements
- EdYoBlue : READ_AHEAD_KB = 256; TS=256
- Some upstreamed commits from newer Linux version : cpu, sched, ext4, f2fs, mm, kernel
- Another initial settings for EdYoBlue and ThundeRStormS kernels
- Magisk 23.1 Offcial
- support for SM-N986B (Note 20 Ultra)
- rest like in S20 v1.4
_________________________________________________
DOWNLOAD:
Links removed by moderator
_________________________________________________
reserved 2
Any chance of porting this kernel for Snapdragon users please?
Sorry but not ... only Exynos bcose is the same hardware like S20.
Thank you.
@nalas , sir ....
is it possible to install this kernel on Dr.Ketan Rom ?
Many thanks in advance
enebro77 said:
@nalas , sir ....
is it possible to install this kernel on Dr.Ketan Rom ?
Many thanks in advance
Click to expand...
Click to collapse
Hi, must be OneUI 3.1 for Exynos. If it is so I think no problems...
nalas said:
Hi, must be OneUI 3.1 for Exynos. If it is so I think no problems...
Click to expand...
Click to collapse
Tested and working properly
Only point is battery will ALWAYS stop charging at 85% eventhough I disable it in thundertweaks or increases to 100% ....
Any workaround to solve this ?
Many thanks in advance, @nalas
Testing on Dr's rom
So far so good
No problems
Charges past 90% for me no problems
enebro77 said:
Tested and working properly
Only point is battery will ALWAYS stop charging at 85% eventhough I disable it in thundertweaks or increases to 100% ....
Any workaround to solve this ?
Many thanks in advance, @nalas
Click to expand...
Click to collapse
Excuse me,how to solve it?
S3BL104 said:
Excuse me,how to solve it?
Click to expand...
Click to collapse
Turn it off if was enabled and restart the phone , default in kernel this is off so will back to full charge mode.
nalas said:
Turn it off if was enabled and restart the phone , default in kernel this is off so will back to full charge mode.
Click to expand...
Click to collapse
Thank you so much @nalas
I keep getting random reboots every couple of hours with sm-n986b on this kernel
royhanks3 said:
I keep getting random reboots every couple of hours with sm-n986b on this kernel
Click to expand...
Click to collapse
UV margines maybe too high at - ? Or magisk older with new app or domething similar...
so far, so good. No reboots at all and really battery friendly kernel ....
Android auto stopped working any ideas?
TrueNix said:
Android auto stopped working any ideas?
Click to expand...
Click to collapse
Look at blicked wakelocks - bt
will this core work on my S20 Ultra SM-N985F ?? and a fix has been made to the kernel to work on old firmware databases
Hargriv said:
will this core work on my S20 Ultra SM-N985F ?? and a fix has been made to the kernel to work on old firmware databases
Click to expand...
Click to collapse
N875f has no RR source, so i cant make it....Ive wrote for samsung source...we will see.
You can write to samsung open source too for give as RR kernel source (Android 11)
I will not make any old base kernel. Is RR A11 so only this i will not back to QQ A10.
But N985F works on kernel from N986B.