Related
For the beginnings of this thread read posts 838-844 here.
alain57 said:
I did the modification on cucuo92 rom
i went back to CM12.1 and noticed that TWRP restaure an NV partition... So i first told TWRP to NOT restaure this partition => phone did not boot
So i had no choice and restaured this partition after all
well I went to a town where there is ONLY LTE 800Mhz, and like I expected did not work :/
So I guess that the NV partition backup in TWRP contains the NV changes :/
Nevertheless, i'll retry this with Cucuo92 rom to be sure that this mod is working on my phone
if it is, i will create a NV backup and try to compare it with the backup I already have (cucuo rom without changes)
and then I'll try to do the exact same difference on the CM12.1 NV backup... maybe this could work
you need to use another tool to do the LTE mod, the window you are showing is the one for UMTS (3G) modification
this window need to stay open, but the LTE mod are done in one other tool
Click to expand...
Click to collapse
So I was reading a little deeper in the thread and a few interesting things came out to me.
CM is known (as of last September) to have added a commit to their code to prevent these changes (my guess is because of their rapid growth and wanting to play with the big manufacturers), so CM12 or CM12.1 may not successfully do this.
It seems that this only works with custom ROM's/kernels that have been compiled from source (meaning Cuoco's ROM is built off of Nubia and they likely are preventing it in the kernel)
It seems the phone has the correct modem to make this happen, but we may also need a custom radio compiled to enable these bands to work - although it seems some people in the other thread have had issues with this. Some say it works and others not so much.
There's more but I don't have time at the moment. I'll try and add more later.
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Exact I stay under Cuoco 2.51 because I love this rom, but maybe the guide work with CM...
Here, again the link of the guide : http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
This is true, they may not. It was only a presumption on my part. They have been so reluctant (okay, flat out refusing to do so) to release the source code and device tree, it wouldn't surprise me that they have this, I just don't know. Nubia/ZTE really seems like they don't care about anyone outside of China.
LePocketPc said:
Exact I stay under Cuoco 2.51 because I love this rom, but maybe the guide work with CM...
Here, again the link of the guide : http://forum.xda-developers.com/galaxy-s5/general/how-to-add-rf-lte-frequency-bands-to-t2886059
Click to expand...
Click to collapse
From what I understand from reading many of the replies in the guide, people have had a hard time making it work with CM. They have to use a different ROM.
well fo me, i enabled band 3, 7 and 20 only with the code number : 524356
I then went to a town where to only LTE is on band 20 (800Mhz) (i checked this on a french 4G => http://www.reseau4g.info/couverture-4g-orange)
and ....
NOT WORKING only 3G (too good to be true)
good part about this : i now has no reason to stay on that ****ty nubia based rom, can switch back to CM12.1
Are you sure you have activates 4G in settings > Msim Settings > Mobile Network > Phone Card One or Two ( Where is your Orange sim card ) > 4G mode, enable LTE 4G networks
voetbalremco said:
The guy that stated he tried it said to use Cuoco 2.50 or so, and that it didn't work on CM. Maybe Nubia does not have the temper code in its firmware.
Click to expand...
Click to collapse
alain57 said:
well fo me, i enabled band 3, 7 and 20 only with the code number : 524356
I then went to a town where to only LTE is on band 20 (800Mhz) (i checked this on a french 4G => http://www.reseau4g.info/couverture-4g-orange)
and ....
NOT WORKING only 3G (too good to be true)
good part about this : i now has no reason to stay on that ****ty nubia based rom, can switch back to CM12.1
Click to expand...
Click to collapse
LePocketPc said:
Are you sure you have activates 4G in settings > Msim Settings > Mobile Network > Phone Card One or Two ( Where is your Orange sim card ) > 4G mode, enable LTE 4G networks
Click to expand...
Click to collapse
yes as I have currently 4G in roaming on a 2600Mhz antenna
these are the settings i setup (i also wrote the second line just in case, but this didn't help :/)
and like I said, i'm currently in 4G but on a 2600Mhz antenna somewhere else
---------- Post added at 11:19 AM ---------- Previous post was at 10:47 AM ----------
at least i can confirm that disabling a band really disable it
i just setup my phone to ONLY accept band 20, rebooted it and no more 4G at the place I am (with 4G 2600Mhz)
I guess that some manufacturer disable some bands by software (and in this case, this mod works)
and some other may actually have some hardware limitations (maybe the LTE radio can't find signals bellow 1000mhz ?
nevertheless, i will do a last test by activation all 800Mhz bands (and for course the 3 an 7 bands)
so it will be bands :
3 6 7 18 19 20 27
for code i received 68026468
I'll test this this afternoon... and update the post after getting some results
edit : i went eating in the other nearby town (800Mhz) and no 4G
so this modification is useless :/
Okay, so it seems that we've had someone on Cuoco and on Nubia test this out without success. Next we need someone with one of the versions of CM to see if it works. I'm on CM12.1 and would try, but I don't have a PC; only Mac and Linux and I'm not sure how to make this work with either one.
Well for cm12 we first need to find how to enable the dialog USB.
Cm12 only get adb and mtp or USB mass storage
And noe of the service code worked...
alain57 said:
Well for cm12 we first need to find how to enable the dialog USB.
Click to expand...
Click to collapse
You have it explained here - http://forum.xda-developers.com/showpost.php?p=57561965&postcount=1
You may actually control all the possible USB configs in a similar way.
And it works on a fully booted phone, and not when swiched-off.
intresting thread, i want to buy a z9 mini... there is also no FDD-LTE 20 (800mhz) for being usable in Germany...
anybody tried this? http://forum.xda-developers.com/showpost.php?p=55560160&postcount=148
other question, could it be that the reciever isnt possible to get 800mhz? Then the Software edit would be not useful
Had not seen that specific thread; although, the person who wrote it was a major contributor to the one that had been pointed out earlier. A couple of the people here tried adding band 20 (in France I think) and it didn't work. From what I understand, the qualcomm modem should work without a problem, it's the radio that may be the issue. From what I've read elsewhere, if the phone is being used for bands 38-41 in China, the antenna should be suitable for the other bands people are looking into activating on the phone.
Pr3muToS said:
intresting thread, i want to buy a z9 mini... there is also no FDD-LTE 20 (800mhz) for being usable in Germany...
anybody tried this? http://forum.xda-developers.com/showpost.php?p=55560160&postcount=148
other question, could it be that the reciever isnt possible to get 800mhz? Then the Software edit would be not useful
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=57012928&postcount=547
doesnt it have also 38-41??
Pr3muToS said:
http://forum.xda-developers.com/showpost.php?p=57012928&postcount=547
doesnt it have also 38-41??
Click to expand...
Click to collapse
Yes, it does, but those bands aren't available in all countries. Those are TDD bands primarily used in Asian countries (thought there are others too).
yes , but you said:
if the phone is being used for bands 38-41 in China, the antenna should be suitable for the other bands people are looking into activating on the phone.
Click to expand...
Click to collapse
but the OPO hast 38-41 and the FDD20 didnt work, see my last link
thats y iam asking.... depends on antenna, or software? Because Qualcomm Tool should be able to active FDD 20 on Qualcomm based phones.. but if the antenna doesnt support, this all is useless, thats the question now?? mhm
https://www.qualcomm.com/products/snapdragon/modems
this is also very intressting... the LTE modem is buidl in @ processor , so it shoudl be able to add all LTE bands...
but now there is also the question if the antenna is a impotant thing or not?
for exmaple on the Nubia z9 mini, there is snapdragon 615, which is alos build in htc desire 820, Oppo R5 , Coolpad F2 LTE, Samsung Galaxy A7, ZTE Blade S6
only F2 and blade s6 dont support the 800mhz LTE band, the other 3 do...
br
edit: i see the s6 also has b20 support now
http://www.comebuy.com/brandpage/specification.html
The B20 band is possible or not on Z7 mini ?
I'm sorry but i don't have the capacities to test it.
But actually the procedure for SOC qualcomm don't work for our device ?
Pr3muToS said:
https://www.qualcomm.com/products/snapdragon/modems
this is also very intressting... the LTE modem is buidl in @ processor , so it shoudl be able to add all LTE bands...
but now there is also the question if the antenna is a impotant thing or not?
for exmaple on the Nubia z9 mini, there is snapdragon 615, which is alos build in htc desire 820, Oppo R5 , Coolpad F2 LTE, Samsung Galaxy A7, ZTE Blade S6
only F2 and blade s6 dont support the 800mhz LTE band, the other 3 do...
br
edit: i see the s6 also has b20 support now
http://www.comebuy.com/brandpage/specification.html
Click to expand...
Click to collapse
hello
Hi everyone, I am trying to enable some lte bands.
I can not make service programming to read my phone. is it totally necessary? becasue qspt and qxdm are reading my phone.
I wrote with qxdm 65609 for bands 1, 4 17 (by the way, is this code alright?) but I can not get 4g to work. Any idea?
I am using quoco's rom
Thanks
LTE band 20 800MHz FDD
Hi did anyone successfull add band 20? Is it working? Can someone help me please? btw have cuocos rom
As I remember, in MIUI 8, in my Xiaomi Mi5, there was option to have VoLTE and VoWiFi, but in later MIUI9 the VoWiFi was removed.
My new provider supports VoLTE and VoWiFi so the question is; Does Poco F1 support VoWiFi ?
someone please check in wifi settings to see if wifi calling settings are present.
tifozif1 said:
As I remember, in MIUI 8, in my Xiaomi Mi5, there was option to have VoLTE and VoWiFi, but in later MIUI9 the VoWiFi was removed.
My new provider supports VoLTE and VoWiFi so the question is; Does Poco F1 support VoWiFi ?
Click to expand...
Click to collapse
I cant turn it on though
CluelessO.o said:
I cant turn it on though
Click to expand...
Click to collapse
Thank you!!!
This is the same that I get in my Mi5, the voWIFI is also disabled in my phone. It's a MIUI thing! I had the expectation that this new phone would be able to have this feature.
Disappointed by Xiaomi
it can be enabled on Mix 2s so there must be a way to also enable it in F1
sprkrt said:
it can be enabled on Mix 2s so there must be a way to also enable it in F1
Click to expand...
Click to collapse
What MIUI version? And which country have you set as Region? (Settings->Additional settings-> Region)
tifozif1 said:
What MIUI version? And which country have you set as Region? (Settings->Additional settings-> Region)
Click to expand...
Click to collapse
I dont have a Mix 2s so I dont have any more details about that.
But in anyway it has to be enabled from the carrier and then you have to configure the APN.
And Mi5 on MIUI 8.xxx had this option but not in MIUI9 any more (current 9.6.2.0 OAAMIFD, global stable)
CluelessO.o said:
I cant turn it on though
Click to expand...
Click to collapse
Even I had the same , greyed out vowifi.
Edited my build.prop, added these lines
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
Now option of vowifi is on but can't find any settings to use it.
Also none of the Indian carriers use vowifi yet.
Edit : found settings for vowifi with Vodafone. Haven't tried yet as no access to WiFi now
tifozif1 said:
As I remember, in MIUI 8, in my Xiaomi Mi5, there was option to have VoLTE and VoWiFi, but in later MIUI9 the VoWiFi was removed.
My new provider supports VoLTE and VoWiFi so the question is; Does Poco F1 support VoWiFi ?
Click to expand...
Click to collapse
You can try the build.prop edit mentioned in the post above and test if it works or not.
After build prop edit , go into settings, Network and sim, click on the sim and in the end u will find vowifi settings
Pls test and confirm.
sanjay0501 said:
You can try the build.prop edit mentioned in the post above and test if it works or not.
After build prop edit , go into settings, Network and sim, click on the sim and in the end u will find vowifi settings
Pls test and confirm.
Click to expand...
Click to collapse
I will when I get the Poco on hand. I don't have it yet.
Does this method requires unlock/root?
tifozif1 said:
I will when I get the Poco on hand. I don't have it yet.
Does this method requires unlock/root?
Click to expand...
Click to collapse
Yes build.prop can only be edited with root permissions
sprkrt said:
it can be enabled on Mix 2s so there must be a way to also enable it in F1
Click to expand...
Click to collapse
There is not an option for the Mix 2s, all radios greyed out, even VoLTE, even though my carrier supports both VoWifi and VoLTE.
sanjay0501 said:
Even I had the same , greyed out vowifi.
Edited my build.prop, added these lines
persist.dbg.ims_volte_enable=1
persist.dbg.volte_avail_ovr=1
persist.dbg.vt_avail_ovr=1
persist.dbg.wfc_avail_ovr=1
persist.radio.rat_on=combine
persist.radio.data_ltd_sys_ind=1
persist.radio.data_con_rprt=1
persist.radio.calls.on.ims=1
Click to expand...
Click to collapse
So I tried this, and it is obviously not for my phone. I have a Mix 2s, I do not claim to be a developer at all, but if you could possibly throw some information my way, I would love to try and get this enabled on my Mi Mix 2s and test.
Question however, are you on MIUI when you edit this? I was on custom AOSP ROM, not MIUI when I put these in. Wondering if that may be why, but again, not smart enough to figure out on my own, but smart enough to follow some directions.
VoWifi is working fine on Poco, at least with German Telekom, O2 and Vodaphone. Root is required. In the Screenshot you can see the VoWifi icon active. And the settings are there too. VoLTE is good also.
Edit: Does not work on MIUI Global for the mix 2s. I looked at the build.prop file for my device and it shows that VoLTE and WiFi are not supported in the OS, so editing the build.prop wouldn't work anyways to enable the radio. Was hoping to honestly just get the radios able to be toggled so I could try them out.
SatBandit said:
VoWifi is working fine on Poco, at least with German Telekom, O2 and Vodaphone. Root is required. In the Screenshot you can see the VoWifi icon active. And the settings are there too. VoLTE is good also.
Click to expand...
Click to collapse
This edit in build.prop is working on Poco, looks like your are running MIUI, not custom ROM correct?
I have only tried this on AOSP, in hopes whatever was needed was pulled in from device tree. I will try to add this running MIUI build.prop and cross my fingers.
Sent from my Mi MIX 2S using Tapatalk
noobtoob said:
Edit: Does not work on MIUI Global for the mix 2s. I looked at the build.prop file for my device and it shows that VoLTE and WiFi are not supported in the OS,
Sent from my Mi MIX 2S using Tapatalk
Click to expand...
Click to collapse
Dont know about aosp, but in miui even dialling *#*#vowifi#*#* shows me vowifi settings even without build.prop edits, of course doesn't work cos indian carriers don't support it yet.
https://forum.xda-developers.com/poco-f1/how-to/guide-activate-vowifi-wlan-call-t3871263
sanjay0501 said:
Dont know about aosp, but in miui even dialling *#*#vowifi#*#* shows me vowifi settings even without build.prop edits, of course doesn't work cos indian carriers don't support it yet.
Click to expand...
Click to collapse
Yeah, the dialer code works on miui, but only for VoLTE. My goal is to get it to enable to enable WiFi calling, even just the radio. I tried the build.prop edit line by line while on miui, just ends up soft-bricking the device. Tried the *#*#vowifi#*#* method too. I think it works on the china models just fine, but not the global (mix 2s, not Poco). I checked everywhere in miui for settings even remotely related, and they were nowhere to be found. Pretty sure they straight up just designed the global version to not have this feature at all. Luckily mounting system, pushing the correct file and setting permission makes it a quick recovery. Unfortunately none of the radios enabled at all.
@sanjay0501
So yeah, it was my fault completely soft-bricking my device like 10 times because I forgot to fix permissions on the build.prop file after the edit (facepalm). The irony is, I remembered to fix every-time I pushed the working build.prop file after the restore.
@der_Kief
I'm going to try to get my radio fixed modifying the instructions for a US based carrier, now that the fog over my brain has cleared up a bit.
Making progress... I am at work without the original cable and cannot get my device to be recognized as a com port with the cable I am using. Hoping when I get home I can fix this ASAP, as I desperately need some WiFi calling.
Sent from my Mi MIX 2S using Tapatalk
With Global Stable 10.2.2.0 or with the latest Global Dev Roms there is VoLTE and VoWiFi support at least with Greece's Cosmote carrier. Using:
dial *#*#86583#*#* (for volte - should state "disabled" in the message)
dial *#*#869434#*#* (for vowifi- should state "disabled" in the message)
dial *#*#4636#*#* for information
Also in the APN settings you should also add the string ",ims" so that the string "default,supl" to become "default,supl,ims". Like:
AT&T and T-Mobile detonators for the S8/S8+/N8 PIE
Thanks to user bigTINY779 I now have a twrp flashable tmb csc features working on pie with my SM-G955N. Should work on most Exynos S8/S8+/N8 PIE - SM-G95X
Please understand the risks of flashing this. Dont try if you dont know how to restore and start over.
I was given permission to share as this is not my work.
I will give no support on this I am just passing it along to the public.
Features include:
wifi calling
caller id
spam protection
recent app protection
call recording
enable camera during call
video calling
Based on the latest omc from n950u. Clean rom flash is recommended but not required, and as always, MAKE SURE YOU BACKUP YOUR EFS AT LEAST! Can be flashed directly after the rom, no need to boot first. ENJOY!
Thanks is also due to tekhd for his original detonators
Downloads : https://mega.nz/#F!GkgQmIKK!tKpLM7K7BAQoSjAUcMUxVg
Thanks for posting this for me. I just haven't had the time. Thanks is also due to tekhd for his original detonators which helped me tremendously in creating these.
bigTINY779 said:
Thanks for posting this for me. I just haven't had the time. Thanks is also due to tekhd for his original detonators which helped me tremendously in creating these.
Click to expand...
Click to collapse
Perfect..... now if video calling can be implemented, I would be the happiest
galaxyornothing2 said:
Perfect..... now if video calling can be implemented, I would be the happiest
Click to expand...
Click to collapse
Video calling should work...
bigTINY779 said:
Video calling should work...
Click to expand...
Click to collapse
I'll give it a try
galaxyornothing2 said:
Perfect..... now if video calling can be implemented, I would be the happiest
Click to expand...
Click to collapse
It works for me
Added S9/S9+ and TEST version of N9. If you try the N9 please let me know if it works well. I don't have N9 to test...
I am using the TMO detonator on a Samsung S950FD and it works well (WIFI calling, VoLTE both working), including on a T-Mobile MVNO. I am wondering though if there could be a similar detonator prepared that would be for CSC XAA (which is the US market generic unlocked CSC). Using XAA would allow the same functions to work without having to reflash the phone each time the operator is changed. What do you think?
Video call doesn't work on Att
Sent from my [device_name] using XDA-Developers Legacy app
destructionj said:
Please understand the risks of flashing this. Dont try if you dont know how to restore and start over
Clean rom flash is recommended but not required, and as always, MAKE SURE YOU BACKUP YOUR EFS AT LEAST!
Click to expand...
Click to collapse
Is this as simple as restoring a rom backup and possibly also restoring EFS or is there something more to this that I should research?
ACardAttack said:
Is this as simple as restoring a rom backup and possibly also restoring EFS or is there something more to this that I should research?
Click to expand...
Click to collapse
If you have a full backup your fine.
bigTINY779 said:
Thanks for posting this for me. I just haven't had the time. Thanks is also due to tekhd for his original detonators which helped me tremendously in creating these.
Click to expand...
Click to collapse
Hi, since you know more about this phone I have a quick question
I got G955N and I'm running on this ROM
https://forum.xda-developers.com/ga...--s8-cross-device-development/thread-t3822134
which is pie based, and I'm going to switch with Verizon in future so I installed
https://forum.xda-developers.com/ga...ility-flashable-csc-selection-v1-1-0-t3636739
last CSCSelection_SM-G95XF_V2.0.0_O_Final.zip which I believe is for Oreo base
it went fine, but after that my phone is mad laggy and I'm keep getting IMS service isn't working. is there any way I can add those CSC for USA base networks manually so it can work with Verizon and others USA base network?
Hi .. i have Carhd rom PIE .. and my phone is a S8+ sm-955F
Is there a file that i can flash .. ifso wich one to choose .. if not .. to bad ..
Denfic said:
Hi .. i have Carhd rom PIE .. and my phone is a S8+ sm-955F
Is there a file that i can flash .. ifso wich one to choose .. if not .. to bad ..
Click to expand...
Click to collapse
ATT_pie_detonator_bigTINY_G95X_N950.zip for AT&T
TMB_pie_detonator_bigTINY_G95X_N950.zip for T Mobile
T-Mobile detonator works perfectly and I love that you kept it minimal to only get all the needed features working.
I'd appreciate a T-Mobile bootlogo removal though tbh
Sorry, I have done quite a few searches, but haven't found any clear instructions on how to install these files. I have a N950F, but use it on ATT, and would like to get wifi calling working. Any help would be appreciated.
I'm new to this. I also am unclear on how to install.
G950F, TWRP 3.4.0 and Magisk 20.4 running. Using Tmobile.
Is this something I have to flash via TWRP or via Odin? And how do I tell which Tmobile file to flash?
I went ahead and just tried to install it the best I knew how.
Phone: SM-G950F Firmware: G950FXXSBDTJ1 Security Patch: October 1, 2020
Carrier T-mobile USA.
I used TWRP 3.4.0 to flash “TMB_pie_detonator_bigTINY_G95X_N950.zip”.
In "Settings>Software Information>Service provider SW ver."
initial CSC was XEU/XEU/OPS.
post detonator it is TMB/TMB/OPS.
I note VoLTE and Wifi Calling options are now present in the drop down menu.
I note HD+ icon during calls now.
I note the 'signal strength' icon on the top now says 4G LTE instead of just 4G.
I'm experiencing poor signal strength and was hoping flashing detonator and getting CSC 'right' for TMO network would help. It has not. Still low download (~5Mbps) and very poor upload (~0.1-0.05Mbps).
My home/neighborhood has lackluster 4g coverage, one of few spots. The TMO-Sprint merger is partly to blame - they're transitioning sprint towers to TMO/making infrastructure changes due to merger. I'm informed things should improve in coming months.
I have yet to test whether everything works 'right'. So far it looks okay, but i'm setting up the G950F as opposed to using it, and instead to give up trying to make the G950F work as I need it to on Tmobile and go for a Pixel 4a 5G on Google Fi and hope that the difference in phone, and the 5g, and ability to switch between networks will meet my needs.
As another poster noted, the tmobile startup splash screen is annoying. I imagine one could hunt for which file to remove from the detonator and repackage it.
That said, thanks to the developers for this tool. It allowed me to answer whether or not optimizing the G950F for the Tmobile USA network would improve signal strength. As such I no longer have to wonder if there was a way to make the G950F work for me and perhaps in the future, when coverage improves, I might find the G950F works quite well and I can give it to a family member.
Does anyone happen to have the files and can reupload? This may be one of the last ways of obtaining t-mobile functionality for the international S8.
I am specifically looking for " TMB_pie_detonator_bigTINY_G95X_N950.zip "
The mega download link must have recently died... (or it just doesn't work for me?)
@LastQuestion any chance you still have it since you posted fairly recently and seemed to have success?
I need these files too
@Puremin0rez were you able to get them?
Hello guys .. im using huawei y7p week ago ... great phone ... my device is updated to android 10 .... the only problem carrier aggregation is not working ... there is no advanced option in menu to enable CA or inside developer mode ... is this phone support CA or not even the cpu kirin 710f support it
+ is there any code or app the find LTE channel bandwith 10/15/20 mhz from huawei device like samsung service mode ?
thanks to all
i find this option inside shortcut maker
I don't know there is any easy way to check Carrier Aggregation support but i think this device support only Contiguous intra-band CA like most of low-cost Chinese devices. I will try this device to my hand and then we know what combinations this device support.
There is no Service Mode exist in Huawei devices.
olkitu said:
I don't know there is any easy way to check Carrier Aggregation support but i think this device support only Contiguous intra-band CA like most of low-cost Chinese devices. I will try this device to my hand and then we know what combinations this device support.
There is no Service Mode exist in Huawei devices.
Click to expand...
Click to collapse
Thanks man .. my carrier support intra+inter band ... CA option maybe need root to enable ... this is my first huawei phone .. totaly trash .. my a7 2017 support a lot of ca combinations even flashing defferent stuck roms and custom roms ... how to root this phone ?
with CA i got over 130mb in speedtest .. right now 50mb ... i need full speed like other phones
lakhssas said:
Thanks man .. my carrier support intra+inter band ... CA option maybe need root to enable ... this is my first huawei phone .. totaly trash .. my a7 2017 support a lot of ca combinations even flashing defferent stuck roms and custom roms ... how to root this phone ?
Click to expand...
Click to collapse
Yes mostly do inter-band CA... I think you can't get CA enabled with root but you can try. I don't know what CA your Samsung A7 2017 support - if you like you can get log from Samsung so i can list device to my website. Here is instruction: https://mt-tech.fi/en/how-to-get-4g...ions-from-your-android-phone/#Samsung_Devices . Custom roms use same baseband as stock - these files are normally signed so there is no way to modify.
olkitu said:
Yes mostly do inter-band CA... I think you can't get CA enabled with root but you can try. I don't know what CA your Samsung A7 2017 support - if you like you can get log from Samsung so i can list device to my website. Here is instruction: https://mt-tech.fi/en/how-to-get-4g...ions-from-your-android-phone/#Samsung_Devices . Custom roms use same baseband as stock - these files are normally signed so there is no way to modify.
Click to expand...
Click to collapse
My a7 2017 lcd display was broken .. you already have ca combinations of a7 2017 ... its the same of a5 2017 https://cacombos.com/device?model=SM-A520F .. i will sell this device .. that is the great idea ... thanks for time
lakhssas said:
My a7 2017 lcd display was broken .. you already have ca combinations of a7 2017 ... its the same of a5 2017 https://cacombos.com/device?model=SM-A520F .. i will sell this device .. that is the great idea ... thanks for time
Click to expand...
Click to collapse
A7 and A5 are different but both could have same 4G CA support...
olkitu said:
A7 and A5 are different but both could have same 4G CA support...
Click to expand...
Click to collapse
No its the same specs ... check it here
https://www.gsmarena.com/compare.php3?idPhone1=8335&idPhone2=8494
lakhssas said:
No its the same specs ... check it here
https://www.gsmarena.com/compare.php3?idPhone1=8335&idPhone2=8494
Click to expand...
Click to collapse
Even on gsmarea have same specs that doesn't tell both devices modem configuration are same... Could have different supported combinations. But of course we can guess both devices have same combinations configured...
Huawei forum answer me .. the phone not support carrier aggregation .. is this CA merge inside the cpu modem or need extra IC on motherboard to work like wifi ic ... GSMARENA was put fake specs if this phone not support carrier aggregation
They just guessing because there is no public specs about carrier aggregation. That is big problem. That is reason why i have build cacombos.com where i list devices support Carrier Aggregation.
olkitu said:
They just guessing because there is no public specs about carrier aggregation. That is big problem. That is reason why i have build cacombos.com where i list devices support Carrier Aggregation.
Click to expand...
Click to collapse
What you think from your experience .. support or not ?
is this CA merge inside the cpu modem or need extra IC on motherboard to work like wifi ic ?
lakhssas said:
What you think from your experience .. support or not ?
Click to expand...
Click to collapse
My experience low cost Huawei and other Chinese devices (example Xiaomi, Realme) support only Carrier Aggregation Combinations used in China and Contiguous Intra-band CA. But please wait - i will test soon this device when i get so i will update then details.
Example CA i think this support is 1C, 3C, 7C, 38C; 40C, 41C and then 1+3.
olkitu said:
My experience low cost Huawei and other Chinese devices (example Xiaomi, Realme) support only Carrier Aggregation Combinations used in China and Contiguous Intra-band CA. But please wait - i will test soon this device when i get so i will update then details.
Example CA i think this support is 1C, 3C, 7C, 38C; 40C, 41C and then 1+3.
Click to expand...
Click to collapse
Ok thanks man ... if you need some test or logs just reply this this post =)
is this 3C mean 1800+1800 ... this combination was working here in samsung & redmi note 8
lakhssas said:
Ok thanks man ... if you need some test or logs just reply this this post =)
is this 3C mean 1800+1800 ... this combination was working here in samsung & redmi note 8
Click to expand...
Click to collapse
Yes 3C mean 1800+1800 contiguous intra-band carrier aggregation and yes Redmi Note 8 support that: https://cacombos.com/device?model=M1908C3JG
olkitu said:
Yes 3C mean 1800+1800 contiguous intra-band carrier aggregation and yes Redmi Note 8 support that: https://cacombos.com/device?model=M1908C3JG
Click to expand...
Click to collapse
About redmi note 8 ... gsmarena shows support 4CA .. and the qualcomm Cpu support only 3CA ... Your site shows 2CA intra band ... Whats correct ?
lakhssas said:
About redmi note 8 ... gsmarena shows support 4CA .. and the qualcomm Cpu support only 3CA ... Your site shows 2CA intra band ... Whats correct ?
Click to expand...
Click to collapse
I don't know why it says 4CA in Gsmarea... there is too much wrong details about CA... Yes Qualcomm modem support that but Xiaomi seems haven't implement 3CA feature - i just guess more combinations -> more expensive. It's very common Redmi series support only 2CA because in China CA is much used.
My site data is based of modem logs - if you like you can confirm it in UE Capability Information message. Here is instruction how you could get it from modem: https://mt-tech.fi/en/how-to-get-4g...hone/#Method_for_Qualcomm_Devices_before_2020
lakhssas said:
Ok thanks man ... if you need some test or logs just reply this this post =)
is this 3C mean 1800+1800 ... this combination was working here in samsung & redmi note 8
Click to expand...
Click to collapse
Sorry i have to update i will not get this device. And there is no easy method get log from Kirin. I'm very sorry but i can't get you much for this.
ARM64 MODEM - 5.0 Upgraded , ready for Android 12 - All files is ARM64 !!
I don't allow for share this files in telegram groups other than my .
My official group for my dev for this device : https://t.me/XDAMAREK10747
If you have question or you find bug , write to me message on telegram
MODEM - 5.0 - Compiled by me - Source Xiaomi - Based on : V11.0.5.0
If you want to use more bands , you must install network guru app for enable bands . Upgraded modem only allow you to enable extra bands in this app . If you are not in USA , please disable CDMA bands . This make faster scaning networks and make your device little faster . If you are in USA or Asia please read whats bands is used in your country.
Flash only via TWRP. Image and flashing via fastboot ARE NOT TESTED.
I don't response , if you don't do backup or flash via fastboot .
All my files working from Android 10-12 . Images tested on erarly alpha of Android 12 .
All bands are visible on screenshots. New vendor (5.0) with enabled VoLte , ViLte and VoWifi is planned for publish soon .
Modem image flash as firmware . In TWRP modem have name firmware !! . Please make backup of you modem . If you find problem , write to me message in telegram or here .
For advanced users :
If your device don't get extra bands , you can use QPST and QXDM . Guide is in internet.
Diag mode you run by command : setprop sys.usb.config diag,adb
Values to change for unlock is :
LINE in QXDM / VALUE to replace
6828/6829 / 17592185995263
2954 / 4294967295
1877 / 18446744073709551615
946 / 0xffff
441 / 0xffff
Click on dual sim , write this value's for sim0 and sim1. Wait 10 seconds , close QXDM and QPST and reboot device .
After reboot app show you new bands .
DOWNLOAD:
https://mega.nz/file/lYc3AQ4L#izBJ4gBBgjCJRCBadoMpAxaue6BqBBTb8eY3nTyR8bg
MAREK10747 said:
ARM64 MODEM - 5.0 Upgraded , ready for Android 12 - All files is ARM64 !!
I don't allow for share this files in telegram groups other than my .
My official group for my dev for this device : https://t.me/XDAMAREK10747
If you have question or you find bug , write to me message on telegram
MODEM - 5.0 - Compiled by me - Source Xiaomi - Based on : V11.0.5.0
If you want to use more bands , you must install network guru app for enable bands . Upgraded modem only allow you to enable extra bands in this app . If you are not in USA , please disable CDMA bands . This make faster scaning networks and make your device little faster . If you are in USA or Asia please read whats bands is used in your country.
Flash only via TWRP. Image and flashing via fastboot ARE NOT TESTED.
I don't response , if you don't do backup or flash via fastboot .
All my files working from Android 10-12 . Images tested on erarly alpha of Android 12 .
All bands are visible on screenshots. New vendor (5.0) with enabled VoLte , ViLte and VoWifi is planned for publish soon .
Modem image flash as firmware . In TWRP modem have name firmware !! . Please make backup of you modem . If you find problem , write to me message in telegram or here .
For advanced users :
If your device don't get extra bands , you can use QPST and QXDM . Guide is in internet.
Diag mode you run by command : setprop sys.usb.config diag,adb
Values to change for unlock is :
LINE in QXDM / VALUE to replace
6828/6829 / 17592185995263
2954 / 4294967295
1877 / 18446744073709551615
946 / 0xffff
441 / 0xffff
Click on dual sim , write this value's for sim0 and sim1. Wait 10 seconds , close QXDM and QPST and reboot device .
After reboot app show you new bands .
DOWNLOAD:
https://mega.nz/file/lYc3AQ4L#izBJ4gBBgjCJRCBadoMpAxaue6BqBBTb8eY3nTyR8bg
Click to expand...
Click to collapse
Hi,
I want to take your approach on my Redmi Note 9S. Is there any guide I can take to enable 4G+ carrier aggregation?
iAmWiz said:
Hi,
I want to take your approach on my Redmi Note 9S. Is there any guide I can take to enable 4G+ carrier aggregation?
Click to expand...
Click to collapse
Now you can use my guide for your device and make copy/paste this thread to thread about your device . Guide with know/how don't exist , you need to do all manually.
MAREK10747 said:
Now you can use my guide for your device and make copy/paste this thread to thread about your device . Guide with know/how don't exist , you need to do all manually.
Click to expand...
Click to collapse
thank you. I am giving this a try
iAmWiz said:
thank you. I am giving this a try
Click to expand...
Click to collapse
if it worked please tell us i want to see if carrier aggregation works
MAREK10747 said:
ARM64 MODEM - 5.0 Upgraded , ready for Android 12 - All files is ARM64 !!
I don't allow for share this files in telegram groups other than my .
My official group for my dev for this device : https://t.me/XDAMAREK10747
If you have question or you find bug , write to me message on telegram
MODEM - 5.0 - Compiled by me - Source Xiaomi - Based on : V11.0.5.0
If you want to use more bands , you must install network guru app for enable bands . Upgraded modem only allow you to enable extra bands in this app . If you are not in USA , please disable CDMA bands . This make faster scaning networks and make your device little faster . If you are in USA or Asia please read whats bands is used in your country.
Flash only via TWRP. Image and flashing via fastboot ARE NOT TESTED.
I don't response , if you don't do backup or flash via fastboot .
All my files working from Android 10-12 . Images tested on erarly alpha of Android 12 .
All bands are visible on screenshots. New vendor (5.0) with enabled VoLte , ViLte and VoWifi is planned for publish soon .
Modem image flash as firmware . In TWRP modem have name firmware !! . Please make backup of you modem . If you find problem , write to me message in telegram or here .
For advanced users :
If your device don't get extra bands , you can use QPST and QXDM . Guide is in internet.
Diag mode you run by command : setprop sys.usb.config diag,adb
Values to change for unlock is :
LINE in QXDM / VALUE to replace
6828/6829 / 17592185995263
2954 / 4294967295
1877 / 18446744073709551615
946 / 0xffff
441 / 0xffff
Click on dual sim , write this value's for sim0 and sim1. Wait 10 seconds , close QXDM and QPST and reboot device .
After reboot app show you new bands .
DOWNLOAD:
https://mega.nz/file/lYc3AQ4L#izBJ4gBBgjCJRCBadoMpAxaue6BqBBTb8eY3nTyR8bg
Click to expand...
Click to collapse
any mediatek guide?
historys said:
if it worked please tell us i want to see if carrier aggregation works
Click to expand...
Click to collapse
sure! that is my main reason for doing this
historys said:
if it worked please tell us i want to see if carrier aggregation works
Click to expand...
Click to collapse
For some reason, it didn't work even after following so many guides on XDA. This inclusive.
I think there's more to just editing values on QXDM for my device.
iAmWiz said:
For some reason, it didn't work even after following so many guides on XDA. This inclusive.
I think there's more to just editing values on QXDM for my device.
Click to expand...
Click to collapse
Have you looked at this site?
There are some useful guide for sony phones there, might also work elsewhere, or at least help you to understand how it works.
MT-TECH.FI - IT Blogi
Tietotekniikkaan ja tietoverkkoihin keskittyvä blogi.
mt-tech.fi
gingerboy92 said:
Have you looked at this site?
There are some useful guide for sony phones there, might also work elsewhere, or at least help you to understand how it works.
MT-TECH.FI - IT Blogi
Tietotekniikkaan ja tietoverkkoihin keskittyvä blogi.
mt-tech.fi
Click to expand...
Click to collapse
Hi, I have.
I've also made some comments on his sites. I want to try something else now to see if it will work.
iAmWiz said:
Hi, I have.
I've also made some comments on his sites. I want to try something else now to see if it will work.
Click to expand...
Click to collapse
Hope you can share it if you've made any progress. Carrier aggregation is one area not so many people talks about. Would be great to learn more
gingerboy92 said:
Hope you can share it if you've made any progress. Carrier aggregation is one area not so many people talks about. Would be great to learn more
Click to expand...
Click to collapse
surely, I will. thanks