When i go on TWRP then Advanced and then ADB Sideload and swipe to start ADB side load my pc disconnects and does not See my phone then when i Stop the Transfer the Phone reconnects to my pc Someone Send Help Please
Related
hi everyone,
I'm coming from this thread http://forum.xda-developers.com/showthread.php?t=1834761
I have been stuck for more than one week now and i didn't find any solution.
My problem is that I'm currently stock in a clockworkmod recovery boot loop on my Asus Transformer Prime without adb/fastboot connection:
1 - I had install CM9 stable on my Transformer Prime, after a wide data and then send throw "adb push" the CM9.zip,
2 - I reboot by CM9 in recovery mod to install Gapps,
3 - I install the Gapps zip,
4 - I ask to clockworkmod to reboot,
5 - Since then I'm in a clockworkmod recovery boot loop without adb/fastboot connection (witch used to be working),
If kown how can I get adb/fastboot connection back to be able to find my device with the adb command " adb devices " and then be able to send this command => " dd if=/dev/zero of=/dev/block/mmcblk0p4 bs=100 count=1 "
Thank you for your understanding,
Kind regards,
Adb and fastboot are two different things... Fastboot is obtained buring booting process with vol down pressed, then not selecting recovery with volume up. So you should have fastboot access.
In this case I would suggest to fastboot flash TWRP (see on their website for instructions) it will perhaps fix things or at least give you adb access.
If you use cwm take the old 5.8.2.0 modded for not looping with reboot to recovery feature, or stay with twrp.
I would look at the following thread for unbricking the TF201:
http://forum.xda-developers.com/showthread.php?t=1514088
Sounds like you might fall into Option 1a.
I was having your same issue but it was because I rebooted into recovery from the reboot option on the CM10 rom. In any event, I couldn't get adb to work or recognize my device no matter what. I then decided to use my macbook pro. I can tell you that using adb on a mac is much easier as you don't have to download the drivers or sdk, just the platform tools. Here's a link: http://forum.xda-developers.com/showthread.php?t=1387527. I know this may not help if you or someone you know doesn't have a mac, but it saved me.
I'm having trouble sideloading the new 5.1.1 OTA update through ADB. I'm completely stock on my N9 and when I use adb while the device is booted everything works fine (adb devices lists my N9 and I can issue commands to it). When I boot into recovery however adb can no longer find my device and thus can't sideload the update.
Searching around I can find a lot of threads about Windows users having driver issues but I didn't think these applied to Macs. Am I missing something? Is anyone else having trouble using a Mac to sideload the OTA update?
Thanks in advance for anyone's help!
Enable USB debugging
Shut down tablet
Press and hold power and volume up together. You will reach a menu.
Select HBOOT
Select recovery
You will see the android with exclamation mark and "no command".
Press power + volume up
You will enter recovery menu
Select adb sideload
Push update
Worked fine on my Mac!!
Is that what you are doing?!
@crispydc,
I don't know anything about Mac's but when you are in stock recovery, and are at the menu for adb sideload you can try unplugging and replugging your USB cable.
^^^ this happened to me on my work computer (windows) just do that step after you select adb sideload.
Ah! Stupid on my end. I was trying to sideload from the screen with the Android logo - I forgot to actually enter the recovery menu and select the 'Install update from ADB' option. Sorry for the noob post and thanks for your help!
What are the steps in side loading ? Obviously download file and boot into recovery and adb but what process do i need to take when using the computer ( windows 8 )
Sent from my Nexus 9 using XDA Free mobile app
JackHanAnLG said:
What are the steps in side loading ? Obviously download file and boot into recovery and adb but what process do i need to take when using the computer ( windows 8 )
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
ADB reboot recovery (you'll see Andy on his back with red !)
To access recovery menu hold power and press & release volume up
Use volume key to navigate to Apply update via ADB
On your PC type in command prompt "ADB sideload " file name""
when my nexus 9 is on and fully booted my windows7 recognise that as a adb device, in recovery it can't find tablet anymore... How can i fix this issue?
zera89 said:
when my nexus 9 is on and fully booted my windows7 recognise that as a adb device, in recovery it can't find tablet anymore... How can i fix this issue?
Click to expand...
Click to collapse
Try to unplug and replug in your USB cable while in recovery.
Hello, I have unlocked bootloader and twrp installed. I used before a custom room from miui forums and it worked well but i wanted to try a new one so i wiped everything on the phone and tried to put the rom via adb sideload but it always fail at some point.
I can't adb push either because adb devices doesn't show my phone.
The last time adb push worked for me and my pc always recognized the phone before so I don't know why is not working this time...
Any ideas? Thank you!!
PS: Yesterday i could transfer the rom via adb push (adb devices showed recovery) but the install failed so today i wanted to try a new one but I just can't...
Windows Device Administrator shows the phone connected as Google Nexus ADB interface.
Ok, i made it.
I mounted only data on TWRP and then ADB devices recognized the phone.
I don't know if i can close the post!
i was trying to root my phone tecno camon cx air and finally see link how to root my phone then i make every step in this site
and because i'm not pro with root my phone destroyed with last command was : adb reboot
and now my phone show black screen with Tecno and down there powered by android and it's not load the android it's just it's keep doing that but no load the android
i try to press power and volume up to enter recovery mode but nothing happen i let battery dead and try again and when i put the charger my phone auto opens and keep restarting again please i need help
Command
Code:
adb reboot
doesn't destroy anything, it simply re-boots phone, nothing else.
And this re-boot obviously worked well. To me it seems phone's boot-loader got currupted.
Anyway: check wether you can access the phone via ADB
Code:
adb devices
jwoegerbauer said:
Command
Code:
adb reboot
doesn't destroy anything, it simply re-boots phone, nothing else.
And this re-boot obviously worked well. To me it seems phone's boot-loader got currupted.
Anyway: check wether you can access the phone via ADB
Code:
adb devices
Click to expand...
Click to collapse
how i can do that while phone keep restarting
0bito said:
how i can do that while phone keep restarting
Click to expand...
Click to collapse
You need to boot your phone in download mode. Just google it, you just need to press some keys
together.
Hi, my device wasn't recognized by the computer so i tried to block abd sideload and after one hour it's still trying to cancel it. Is it normal?