Hello everyone, i'm waiting for update to emui 10 in morocco for my BLA-L29 and stiil don't receive it but k got in FF the update and wanna ask if i can use it or not. And if i can use it which version can i use?
Huawei mate 10 pro BLA-L29
No body knows ?
simuzer said:
No body knows ?
Click to expand...
Click to collapse
Check from HiCare. You can see update there.
alycann said:
Check from HiCare. You can see update there.
Click to expand...
Click to collapse
there is not for c432.
tissot73 said:
if i can use it or not
Click to expand...
Click to collapse
Not, theres no way to flash FW from Firmware finder. You can upgrade to higher EMUI version flashing Service ROM using dload method only. Afaik there's no Service ROM EMUI 10 for BLA models yet. IMO wait for OTA update.
P.S.: The best method to upgrade via Service ROM is searching for the Service ROM on https://androidhost.ru/ and doing the dload method. Process will erase all the data from your device !
(Before you do anything, read carefully Software Upgrade Guidline in "ReleaseDoc" . With Service ROM you will get full stock with locked bootloader. It is very important to choose your region! (C636, C432, etc.)
You have found some way to install it, since and tried in all ways and still do not know how to update it[emoji26]
Enviado desde mi RMX1931 mediante Tapatalk
Related
I would like to present a little VDO GUIDE for how to debrand Huawei Phone via my tool
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility
In this VDO GUIDE , I use Huawei Mate 8 model, and use these same method for Huawei P9 Plus
HI, whats the benefit of debranding? I'm curious but dunno what the benefits are, thanks
Jostian said:
HI, whats the benefit of debranding? I'm curious but dunno what the benefits are, thanks
Click to expand...
Click to collapse
The benefits of debrand , you can use new firmware from other variant, Maybe you can solve problem about your phone such as mate 8 can't go back to EMUI 4.0 after upgrade to EMUI4.1 I have to debrand to C432 then dload EMUI 4.0 of my stock firmware , for any people who use AL10 from china that have many bloatware or chinese apps you can debrand to EU.
By doing this, can I install international firmware on my Chinese variant?
yaxanali17 said:
By doing this, can I install international firmware on my Chinese variant?
Click to expand...
Click to collapse
sure. you can.
Sent from my HUAWEI NXT-L29 using Tapatalk
somboons said:
I would like to present a little VDO GUIDE for how to debrand Huawei Phone via my tool
[TOOL] SRK Tool Huawei Bootloader/ROOT/Recovery/Backup/Utility
In this VDO GUIDE , I use Huawei Mate 8 model, and use these same method for Huawei P9 Plus
Click to expand...
Click to collapse
Hi. Can the same thing be done in a P9 lite?
I will be interested to know if anyone has successfully debranded a Vodafone P9 Plus from the UK using this method?
Solved
any one test on L29, I want to debrand from C185 to C636
When open VERLIST.img had this code:
Code:
VIE_C900B000
EVA_Global
VIE_Global_B025
Edit:
I used VIE_C900B000 and debrand to C636 and upgrade framework to VIE-L29C636B130 from another thread yours
Thanks bro :fingers-crossed::fingers-crossed:
My phone came with C636, any benefits of me debranding it ?
clarkgable said:
I will be interested to know if anyone has successfully debranded a Vodafone P9 Plus from the UK using this method?
Click to expand...
Click to collapse
did it last night, went from C02B127 to C432B161.
I would personally think if some voice illustration is attached, it will be more watcher-friendly.
Jostian said:
did it last night, went from C02B127 to C432B161.
Click to expand...
Click to collapse
HI,
Could you please write a step by step guide?
I would really appreciate it! I feel lost in the red forest...
My phone failed to update to c02b128 but it changed the version info without installing the new apps.. so now I need to debrand and install the latest fw manually..
Thank you in advance!
Best Regards!
I downloaded the B161 for 432 from the stock firmwares thread and then created the dload folder on the ext sd card and put the 2 files from the update zip into the dload folder. Then followed the video guide in the debranding thread. Just make sure yr phone is rooted (the tool can do that for you, it's very easy to follow the options). Once rooted you choose option 7 (utility) and then change the oeminfo & custombin (option 9) Then after rebooting choose option 7 again and choose option 10. Download Huawei extractor 0.9.9.3 (google it) and use it as shown in video, once finished with changing the ro.build.display then change recovery to stock (use the tool as per video) and then unroot from within supersu app (choose full unroot option in settings). Then use the project menu (it's in the video) to flash the update file. Once rebooted activate dev options and debugging and flash twrp recovery and root of you want and all done. Hope this helps a bit
Sent from my VIE-L09 using Tapatalk
Jostian said:
I downloaded the B161 for 432 from the stock firmwares thread and then created the dload folder on the ext sd card and put the 2 files from the update zip into the dload folder. Then followed the video guide in the debranding thread. Just make sure yr phone is rooted (the tool can do that for you, it's very easy to follow the options). Once rooted you choose option 7 (utility) and then change the oeminfo & custombin (option 9) Then after rebooting choose option 7 again and choose option 10. Download Huawei extractor 0.9.9.3 (google it) and use it as shown in video, once finished with changing the ro.build.display then change recovery to stock (use the tool as per video) and then unroot from within supersu app (choose full unroot option in settings). Then use the project menu (it's in the video) to flash the update file. Once rebooted activate dev options and debugging and flash twrp recovery and root of you want and all done. Hope this helps a bit
Sent from my VIE-L09 using Tapatalk
Click to expand...
Click to collapse
Great! Thank you!
Quick one: Do you have the new apps? Like TV remote?
Yes but i deleted them as i don't use them
Sent from my VIE-L09 using Tapatalk
Jostian said:
Yes but i deleted them as i don't use them
Sent from my VIE-L09 using Tapatalk
Click to expand...
Click to collapse
Ok, Thank you! I'll give it a go
Just hated waiting for my carrier to release firmware so that's why I debranded so i could update when a new firmware was released by Huawei.
Sent from my VIE-L09 using Tapatalk
Jostian said:
Just hated waiting for my carrier to release firmware so that's why I debranded so i could update when a new firmware was released by Huawei.
Sent from my VIE-L09 using Tapatalk
Click to expand...
Click to collapse
Did you have to unlock the bootloader? or just root it?!
Thanks,
fr34ky
VIE-AL10 anyone?
I have VIE-AL10 with VIE-AL10C00B176 Chinese version, anybody debranded this?
I live in Europe and there is no dual sim in Europe, am I better of Asia?
Any advice, appreciated.
I've got an unbranded L29C432 mate pro but been stuck at the .161 firmware for ages, tried using HiCare but can't seem to find new firmware.
Can I do a manual update? (dload method?) and which firmware should I download? Too bad FF doesn't work anymore :crying:
Same here. No OTA,no hicare and stuck on November security patch.
SnowOokami said:
I've got an unbranded L29C432 mate pro but been stuck at the .161 firmware for ages, tried using HiCare but can't seem to find new firmware.
Can I do a manual update? (dload method?) and which firmware should I download? Too bad FF doesn't work anymore :crying:
Click to expand...
Click to collapse
You can flash Service ROM 9.0.0.243 from dload
https://androidhost.ru/Uqk
Instructions for installing can be found in folder "ReleaseDoc" .
bozka1 said:
You can flash Service ROM 9.0.0.243 from dload
https://androidhost.ru/Uqk
Instructions for installing can be found in folder "ReleaseDoc" .
Click to expand...
Click to collapse
going to try that!
SnowOokami said:
going to try that!
Click to expand...
Click to collapse
Warning: this process will erase all the data from your device!!!
Help, who can help me download this firmware, I really have no way, thank you.
lya-l09(c69)emui9.1
mengmsj said:
Help, who can help me download this firmware, I really have no way, thank you.
lya-l09(c69)emui9.1
Click to expand...
Click to collapse
why do yo need emui 9.1?
if you did the dload method to update to emui 10 there's no way to do a downgrade to emui 9.1 until your carrier (Telcel) release emui 10
otherwise you can send me a pm and maybe i could help you with the firmware
tokis said:
if you did the dload method to update to emui 10 there's no way to do a downgrade to emui 9.1
Click to expand...
Click to collapse
There is way to make hisuite use or show correct rollback package from 10 to 9.1 package.
(Hisuite launcher and pztched hisuite)
oslo83 said:
There is way to make hisuite use or show correct rollback package from 10 to 9.1 package.
(Hisuite launcher and pztched hisuite)
Click to expand...
Click to collapse
sure there is a way to do it but it only works when the rollback is approved for your device or region
the mate 20 pro that he has is from mexico
Huawei doesn't release emui 10 there, not even in beta
im telling you this because i have a mate 20 pro from mexico
tokis said:
sure there is a way to do it but it only works when the rollback is approved for your device or region
the mate 20 pro that he has is from mexico
Huawei doesn't release emui 10 there, not even in beta
im telling you this because i have a mate 20 pro from mexico
Click to expand...
Click to collapse
OVS rollback packages are still actually approved for your device's imeis.
At least I think so.
I am using Mate 10 ALP-L29C636 in Pakistan, my phone is stuck in Pie 9.0.0.228 and not received 9.1 version till now. Anyone using the same can confirm whether it's me or others have been updated to 9.1.
What can be the possible problem.
I am also from Pakistan and i have c185 variant, my current software ver is 9.1.0. 320. Don't know about c636.
krGemini said:
I am using Mate 10 ALP-L29C636 in Pakistan, my phone is stuck in Pie 9.0.0.228 and not received 9.1 version till now. Anyone using the same can confirm whether it's me or others have been updated to 9.1.
What can be the possible problem.
Click to expand...
Click to collapse
Try hisuite, remove your SIM card and connect to pc and open hisuite.
Or change country in hicare to any country for example UAE or Singapore or UK and check for update.
I am from Egypt and have L29C636,9.1.321
I also think so. As @hamadazh said, download HiSuite from Huawei official website, and then try to upgrade for your Mate 10.
I have received the OTA updates once I changed my sim, don't know how but now I am on 9.1.0.321 build.
krGemini said:
I have received the OTA updates once I changed my sim, don't know how but now I am on 9.1.0.321 build.
Click to expand...
Click to collapse
What's your model
typhoon9000 said:
What's your model
Click to expand...
Click to collapse
I think you haven't gone through the thread earlier posts.
its Mate 10 ALP-L29 with region C636
krGemini said:
I think you haven't gone through the thread earlier posts.
its Mate 10 ALP-L29 with region C636
Click to expand...
Click to collapse
Understood
typhoon9000 said:
Low performance Recorded for Emui 10 d3vices
Click to expand...
Click to collapse
And how is this related to this thread?
P. S. Stop spamming all-over with these YouTube videos!
How can I update a Huawei P20 Lite (ANE-LX2) with 8.0.0.120 to any version of Android 10? Or, at least, 9.1 official. When trying to update officially with system menu it does not offer me any update. I have bootloader unlocked and is rooted, but apparently the Android 9-10 ROMs require EMUI 9 and I have EMUI 8. What can I do? I've been exploring forums for hours and I can't find something clear. I need to update EMUI version and Android version separately?
Toranks said:
How can I update a Huawei P20 Lite (ANE-LX3) with 8.0.0.120 to any version of Android 10? Or, at least, 9.1 official. When trying to update officially with system menu it does not offer me any update. I have bootloader unlocked and is rooted, but apparently the Android 9-10 ROMs require EMUI 9 and I have EMUI 8. What can I do? I've been exploring forums for hours and I can't find something clear. I need to update EMUI version and Android version separately?
Click to expand...
Click to collapse
What is exactly your build number? (Settings > About phone )
-Alf- said:
What is exactly your build number? (Settings > About phone )
Click to expand...
Click to collapse
ANE-LX2 8.0.0.120(C636)
Toranks said:
ANE-LX2 8.0.0.120(C636)
Click to expand...
Click to collapse
Unfortunately, there's no EMUI 9.1 Service ROM on androidhost.ru for region C636.
Try to update via HiSuite or via eRecovery .
(make sure to have the stock recovery flash)
I don't mind changing the region. In fact, I would prefer change it to EU. I can?
Hisuite and erecovery doesn't offer updates
Toranks said:
I don't mind changing the region
Click to expand...
Click to collapse
me neither
Toranks said:
ANE-LX2 8.0.0.120(C636)
Click to expand...
Click to collapse
Toranks said:
In fact, I would prefer change it to EU. I can?
Click to expand...
Click to collapse
Yes, you can.
Toranks said:
Hisuite and erecovery doesn't offer updates
Click to expand...
Click to collapse
And what about HiCare ?
Now I am on 9.1 with an official european OTA, have changed region from spceas to eu with dc-unlocker (this cost to me 2 credits), and with root. It took me a long time to get it, so I'm scared to upgrade to android 10 and lost my root. Any suggestion?
Toranks said:
I'm scared to upgrade to android 10 and lost my root. Any suggestion?
Click to expand...
Click to collapse
It depends on:
1. the type of root
2. whether you have Bootloader unlock code (it is not recommended to play with custom ROMs without BL unlock code).
In any case, you can install the following types of custom ROMs:
A) xxxxx-arm64-bgS(or bvS) with built-in SU (sometimes with SuperUser) ,then you need only install phh-superuser.apk to get root permissions
B) xxxxx-arm64-bgZ/bvZ with built-in enhanced dynamic root (you can enable/disable superuser root in phone settings)
I've bootloader unlocked. Type of root... I suppose magisk root. What is xxxxx-arm64-bg* ? This is a ROM? I can't find this
Toranks said:
I've bootloader unlocked
Click to expand...
Click to collapse
it is clear to me , but I asked about the unlocker key . In other words, can you unlock the BL again if necessary?
Toranks said:
What is xxxxx-arm64-bg* ?
Click to expand...
Click to collapse
For example:
crdrom-v300m-210228-arm64-bgZ.img.xz
Toranks said:
I can't find this
Click to expand...
Click to collapse
search e.g. "Arrow", "AOSP", "Resurrection Remix", "Pixel Experience Plus" etc.
-Alf- said:
it is clear to me , but I asked about the unlocker key . In other words, can you unlock the BL again if necessary?
For example:
crdrom-v300m-210228-arm64-bgZ.img.xz
search e.g. "Arrow", "AOSP", "Resurrection Remix", "Pixel Experience Plus" etc.
Click to expand...
Click to collapse
Yes, I can unlock BL again. Thanks, I will search. But now I have a new problem... on an asian P20 Lite (spcseas) g-sensors doesn't work if I install any EU ROM
If anybody knows what is the password of this file, I would be grateful:
ANE-LX2 9.1.0.209(C636E4R1P5T8) Full Stock ministryofsolutions.com
(Not "ministryofsolutions.com", as usual)
This is the only asian 9.1 firmware available without pay
¡Finally! I find an 9.1 asian firmware on an Turkey forum, previous registration. Installed via dload without problems, and g-sensors works. Now I will try to root...
Link: https://drive.google.com/file/d/1lJ...72eN9WcwwaMgKHqhcWNYFA2wzslg0CgzZHZLsTLfuSJLQ