Hello guys so today I want to teach you guys how to revert your software to stock Miui.
1. First of all, you need to download Mi Flash Tool ( https://www.xiaomiflash.com/download/ )
2. Then you need to download the fastboot for your device and unzip the file ( https://c.mi.com/oc/miuidownload/detail?guide=2 )
3. Put your phone into fastboot mode and plug it into your PC
4. Open Mi Flash Tool
5. Click "select" then navigate to your rom files that you have unzip
6. Choose either you want to clean and lock the bootloader or just clean and keep the bootloader. ( Clean and lock bootloader is recommended )
7. Click flash and wait until the flashing is done.
8. Now you're back in stock rom.
Update : If u want to rollback to 11.0.7 and have your bootloader unlocked u need to choose option clean all only
Hello.
This tutorial saved my phone. It was stuck on a black screen saying "Your system is destyroyed." I freaked out a lot. When I found this page, I was so happy. Thank you so much.
Best regards.
neo2006pf said:
Hello.
This tutorial saved my phone. It was stuck on a black screen saying "Your system is destyroyed." I freaked out a lot. When I found this page, I was so happy. Thank you so much.
Best regards.
Click to expand...
Click to collapse
Glad to know that my thread is useful to someone ?
miflash says it cannot find the log in the log folder. i put the miflash+tthe fastboot update in root folder.
doesnt work
I will answer my request: the above link shows the flash tool until 2018 version. it does not work. use the 2020 version from here !
That's for this very helpful thread. My device was bricked and I managed to recover it.
I had to change computers and install the Xiaomi drivers (prompted by u/drahtwurst's 2020 version linked previously). Turns out the machine I was using had corrupted drivers somehow.
What's the difference of doing this and flashing through recovery the MIUI ROM?
Worked perfectly, thanks heaps man! If anyone gets errors with the MiFlash tool, just create a new folder in the program's direcotery named LOG and it should fix it
Hi, please can anyone send a link for redmi note 9s stock recovery.
Hi,
Will this procedure, relock the bootloader?
Thanks
brabbit640 said:
Hi,
Will this procedure, relock the bootloader?
Thanks
Click to expand...
Click to collapse
If you select clean all and lock
Hi all,
i unlocked my curtana Device a few days ago and flashed xiaomi.eu, Havoc and RR ROMs. Because i like to geivew the Device to my father i flashed the original Rom to get everything back to Original.
I used the File curtana_global_images_V11.0.11.0.QJWMIXM_20200811.0000.00_10.0_global_38000bbd8b.tgz and flashed it via BatchFile, via Mi Flash and via XiaoMiTool V2 but all i got is a bootloop after flashing.
Do you have any idea? Do i miss something? After flashing the Xiaomi.eu ROM again, it boots up but i have still the annoying WLAN bug.
any help is welcome.
Thanks in advance
Could fix it with this hint.
https://forum.xda-developers.com/re.../to-recover-bootloop-return-to-stock-t4142799
System has been destroyed
Guys please help!
I tried to flash the stock rom but the flashing stopped with an error:
[14:15:00 c5461ce8]:error:Sending sparse 'super' 1/7 (784824 KB) FAILED (Error reading sparse file)
If i try to flash again it never stopps, waited 2 hours. Now my system is destroyed and I dont know how to recover it. :crying:
Ok, solved the problem at the end with this tool: Link
ShazlieyAzizan said:
Update : If u want to rollback to 11.0.7 and have your bootloader unlocked u need to choose option clean all only
Click to expand...
Click to collapse
bana yardımcı olurmusunuz cihaz hiç açılmıyor
---------- Post added at 11:24 PM ---------- Previous post was at 11:19 PM ----------
neo2006pf said:
Hello.
This tutorial saved my phone. It was stuck on a black screen saying "Your system is destyroyed." I freaked out a lot. When I found this page, I was so happy. Thank you so much.
Best regards.
Click to expand...
Click to collapse
note9 s brick oldu bana yardımcı olun açılmıyor siyah ekran
Can i downgrade to miui 11 from 12 using this method? My bootloader is locked. Indian version
oluwafunso97 said:
Hi, please can anyone send a link for redmi note 9s stock recovery.
Click to expand...
Click to collapse
Find inside Fastboot ROM
I just noticed the reply, sorry guys I gave my redmi note 9s to my mom so if you guys still got a problem with it you can try to refer from another thread or just quote this comment and I will try to answer it. Cheers!
I seem to have bricked my device using the MiFlash program, it had ''\$fastboot -s *lock'' in the box labeled checkpoint in the configuration settings, in the middle of the flashing process the device started to repeatedly reboot non stop, and if I hold down volume down it only flashes the fastboot screen for a moment before rebooting again, it seems there is nothing I can do since I cannot access fastboot mode or recovery mode. The device had twrp installed and I was trying to flash from the PixsysOS rom to MIUI v11.0.8.0 so that I could try out the Evolution X rom, I do not know what I did wrong, maybe I should have formatted data in twrp before trying to flash a new rom, or just flash the whole thing from twrp, or not flash the MIUI recovery at all. I hope someone can tell me what I did wrong .
Don't use 'flash and lock bootloader' . Just 'flash' .
Related
If I flash TWRP using this method:
http://forum.xda-developers.com/red...-to-flash-twrp-recovery-unlock-t3473294/page1
Will I be able to normally flash CM/MIUI roms without unlocking bootloader. My bootloader was never unlocked btw.
I dont care about OTA update, I never dirty flash. Always clean
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
karkand said:
@malimukk
Hi,
Of course you can do that, just read the second post of OP.
Thanks.
Click to expand...
Click to collapse
Also flash kernels etc.?
I have seen some discussions about which TWRP to install. Alka or Cofface.. what would you recommend?
Thanks
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
superstar007 said:
i replaced the default recovery.img with twrp 3.0.2 (renamed and replaced as recovery.img)for redmi note 3.the phone flashed sucessfully but i cant enter into recovery mode.when i press "power+volume up" its showing to connect charger.even tried from the updator app but no use.any help !
Click to expand...
Click to collapse
Do you have an unlocked bootloader? You need to check in fastboot mode, by typing in fastboot oem device-info
you may have to boot straight to recovery, or the recovery image may get overwritten
my bootloader is locked.i think above method is for locked bootloader.right.i pressed power+volume up right after flashing(after disconnecting cable),phone showed mi logo and then after 5-6 seconds its showing to connect cable again. also when i use miflash tool to unlock bootloader.its not showing advanced menu in miflash tool.any solutionfor that too.my desktop is windows 7 32 bit os.do i need a 64 bit os to get all options in miflash tool.pls any solution.
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
manudhomra said:
Can anyone confirm the successful installation on Kenzo along with the step by step guide. And please let me know which fastboot rom should be used for fastboot flashing. Because we have 3 type of ROMs on Kenzo I.e. Global Stable, Global Developer or Chinese Developer rom. Please provide the step wise installation guide so that I can carry on
Click to expand...
Click to collapse
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Mononitoto said:
I can't write you a detailed step-by-step guide because my English is not so perfect, but: you need to install the Global/Chinese Developer rom. Must be Developer rom, but you can choose which of them (Chinese or Global).
I made it with Global Developer, so I can confirm that this method perfectly works.
Luck!
Click to expand...
Click to collapse
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
superstar007 said:
pls help
1.can i use official twrp version from there site or need any modded version
2.pls confirm i only have to replace "recovery.img" and no other system files
Click to expand...
Click to collapse
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Mononitoto said:
You need the modded version and yes, only have to replace that .img and no other.
Check this thread, is which I followed
http://forum.xda-developers.com/redmi-note-3/how-to/method-to-flash-twrp-recovery-unlock-t3473294
Click to expand...
Click to collapse
thank you so much it worked perfectly.and i hope installing xposed framework wont be a problem in the future.
Hi guys,
Before you say again a topic on a non bricked One Plus X, I would like to let you know that I've checked and try almost all of the tutorial I've seen on xda and one plus forum.
I was on CM14.1 with this ROM : https://forum.xda-developers.com/oneplus-x/orig-development/rom-cyanogenmod-14-onyx-t3452150
Unfortunately, I made the 25-12-2016 update and it totally broke up the phone..
I download the OnePlus X OxygenOS 3.1.4 on the One Plus website. So I flash it on the stock recovery, it tells me "Install success" then I reboot and it stays on the bootlogo.
For information, I can't access the oem unlock menu if needed, but when I ask the oem device info it says unlocked. The phone is detected by the computer sometimes with unknown device and sometimes correctly with the qualcomm drivers..
I have a back up made from TWRP, I can access the device by the fastboot mode, it seems that all the operations written here worked but it doesn't install or even boot on TWRP..
Thanks for your help guys.
Are you using latest TWRP from website think version 3.0.3?
Exodusche said:
Are you using latest TWRP from website think version 3.0.3?
Click to expand...
Click to collapse
I'm not even using TWRP, since I can't boot on it.. But I tried to flash the twrp-3.0.2-2 from blue spark v41, after the installation via Flashboot, it doesn't boot up on the recovery..
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Exodusche said:
So after flashing TWRP you use fastboot boot recovery.img and nothing happens?
Click to expand...
Click to collapse
Exactly, the phone is stuck on the one plus logo..
defqon_1 said:
Exactly, the phone is stuck on the one plus logo..
Click to expand...
Click to collapse
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Divyesh49 said:
If you did not unlocked bootloader properly then also you might face the problem...
to unlock bootloader: https://forum.xda-developers.com/oneplus-x/general/discussion-how-to-root-oneplus-x-t3242830
make sure you follow all the step. (If you didn't followed these steps then lock bootloader {fastboot oem lock} and unlock using this mathod, worked for me.)
Falsh this kernal after flashing rom and gapps, https://forum.xda-developers.com/oneplus-x/development/kernel-arsenic-kernel-r2-t3422020
Don't forget to hit :good:
Click to expand...
Click to collapse
Didn't work. I tried to lock and then unlock to be sure but not is stay in false for tempered AND unlocked.
So I don't have any idea on how make android back on my phone.
I just have access to Fastboot mode. No recovery, nothing else..
EDIT : phone is not starting anymore. I try to charge it hoping it just a low battery problem..
You should send it to RMA
Trimis de pe al meu Redmi 3S folosind Tapatalk
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Help Pls
defqon_1 said:
Finally, I resolved the problem I don't know how but for the moment I have stock recovery and stock rom ! :laugh:
I will wait for a stable rom for Nougat. Thanks for the help guys !
PS : how do I close or write resolved at the top of the subject ?
Click to expand...
Click to collapse
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Fix It!
Exodusche said:
Start by seeing if you can fastboot flash stock recovery from any 2.X.X OOS. Then fastboot flash twrp 3.0.2. If your on new bootloader meaning latest ROMs or OOS3 then you need to boot into 3.0.2 and from there you can flash IMG of twrp 3.0.3. Make sure you boot right back into recovery after flashing any twrp or it won't stick. This worked for me when I lost my recovery twice but always remember at your own risk. Not responsible if you make your phone into a paper weight.
Click to expand...
Click to collapse
Done! finally i can reinstall stock rom and recovery with drivers by usb.
UBCM said:
I have the same problem, access to fastboot but no to recovery. How do you resolved it?
Click to expand...
Click to collapse
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Done
defqon_1 said:
I have tried multiple tools that I find on XDA. I put all the zip files like bootloader update and rom on my sdcard. And by a great night, the OOS 3.1.4 finally booted up ! So I don't have a miracle solutions that can help you..
Click to expand...
Click to collapse
Don't worry i have restored my OPX 5 days ago. I used the method of this video: https://youtu.be/R4SVSovw4Jo and files from this thread: https://forum.xda-developers.com/oneplus-x/general/guide-mega-unbrick-guide-hard-bricked-t3272108 , if it can help someone.
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Fran Montero said:
hi guys!
Anyone knows how to install twrp in the latest stock rom?
I tried in windows 10 using flash tools and a preloader error apperas.
In windows XP i could install twrp but it did not load when trying to access it.
Thanks!
Click to expand...
Click to collapse
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Ruben Craveiro said:
it might not have loaded because it was maybe an updated twrp eith an old preloader, try flashing an older twrp or update preloader
Click to expand...
Click to collapse
Have you installed it already?
Many thanks!
Fran Montero said:
Have you installed it already?
Many thanks!
Click to expand...
Click to collapse
Im using latest twrp with updated preloader and LOS13
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Maybe you have a sd card formatted as internal storage?
Fran Montero said:
Thanks for the answer.
I tried and TWRP is flashed succesfully and i can even load it, but when rebooting system it is not loading, it remains on the withe elephone logo
Click to expand...
Click to collapse
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
1. load scatter.txt in earlier post.
2. select preloader, lk and boot imgs, location of these from the stock 20160810 ROM.
3. select recovery, location of TWRP img.
4. unselect everything else.
Click to expand...
Click to collapse
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
If your device already rooted, you can also install flashyfi and flash the .img file.
jotei66 said:
Hi,
I'm unsure if this method will work for you, but I also had "preloader Error message" in FlashTools trying to flash TWRP in Stock Rom 2016810 while trying to flash the Eragon ROM.
As the Stock ROM you are using (20171201) is kinda newer than stock 2016810 Im kinda assuming it should work the same.
In order for it to flash without errors, I did the following and worked fine :
Use FlashTools ver v5.1612 - https://www.androidfilehost.com/?fid=24591000424940027
Download your stock rom 20171201
https://mega.nz/#!atZAyKxb!i6jpNQNR_VZZ3nS79LhL2xi78WHx7XI4gKFllc8 RJKw
Then download TWRP_3.0.2.8.zip here: https://www.androidfilehost.com/?fid=24727369092696060
Unzip all and and copy the "MT6755_Android_scatter" & "recovery.img" from TWRP_3.0.2.8 folder into the Elephone_P9000_20170112 Rom folder.
Then open Flash Tools - add the scatter file from the Elephone_P9000_20170112 Rom folder
Untick everything in flashtools except the recovery and then try to flash, hopefully it will work for you too. without errors '
Click to expand...
Click to collapse
a bit late (did came to it to test your solution earlier) but it worked indeed. perfect, very much appreciated.
Can u upload 20171201 again?! Link is not working... Thx
opss said:
Can u upload 20171201 again?! Link is not working... Thx
Click to expand...
Click to collapse
You'll find a link here: https://forum.xda-developers.com/el...t/rom-stock-rom-android-6-0-12-01-17-t3542463
Thx dude
jotei66 said:
Hi, I think this maybe to do with the new preloader etc..
I read this in the thread for TWRP for Elephone P9000 3.0.2-8:
Here: https://forum.xda-developers.com/el...hone-p9000-t3426678/post70713618#post70713618
So maybe Unzip the 20171201 Rom, copy TWRP scatter & recovery.img to this folder, open flash tools and select recovery and point to recovery.img
But also select preloader, lk and boot img (double check they are pointing to corresponding files from the 20171201 ROM
Again, I am unsure if that will work but as I noticed the above post in the TWRP thread, thought it maybe relevant to your issue
PS: Windows 10 can be awkward with splash tools at times, I have windows 10 but in order for it to work - I have to press the Download in SplashTools, kinda count to 5, then hold vol + and then attach USB to my phone and it works fine
Click to expand...
Click to collapse
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
Click to expand...
Click to collapse
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
thecrazyfarang said:
I've wasted countless hours trying to get spf to work with my windows 10 machine. Your solution worked like a charm, the flashing was successful (managed to get the process to work when before I was getting only preloader errors), however I still don't have twrp but the standard android recovery. Have you got any other solution that I should try? Cheers.
---------- Post added 9th May 2017 at 12:18 AM ---------- Previous post was 8th May 2017 at 11:43 PM ----------
I reflashed and managed to get twrp but now the phone won't boot, it is stuck in the Elephone logo
Click to expand...
Click to collapse
Have you tried pressing power and then keep finger pressed on vol up to go straight to TWRP recovery and then flashing a new ROM in TWRP ?
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
thecrazyfarang said:
I didn't do that as I didn't have another rom saved in my phone. What I eventually managed to do was flash the official nougat via spf tool. I'm saying eventually because this piece of crap windows 10 didn't want to make the connection even with the volume up button. When I was going to give up and order a new phone, it connected and now I am happy even though I don't have twrp nor root, but not going to risk it again. Thanks again for your help though, greatly appreciated.
Click to expand...
Click to collapse
No worries, just glad you got it sorted out.
Btw (although I know you dont really wanna risk trying it) my son uses my P9000 and has TWRP installed with no issues at all and root with Magisk.
But great yous sorted out
Root twrp Step by step for newbeee-
Ok,so I've installed TWRP 3.0.2-8 and when I start the phone it goes into the recovery... what to do next? Can I find a tutorial somewhere how to do this? And wich image can I use or is the best for the moment?
thx for helping...
"The current image(boot/recovery) have been destroyed and can not boot.
Please flash the corret image"
Hey guys can someone help me ?
my device can't booting, because I patched my boot.img because I need to root it, and I don't have stock boot.img
Already downloaded from stock rom 4 times and corrupt
but I still can use the bootloader / fastboot
Maybe someone can help me with the boot.img ? I mean send/upload it
NB : I'm in .14 Rom
My device already unlocked/UBL
please someone help me with booting.img recovery.img
6 times downloaded firmware but I still got corrupted file
puttr said:
please someone help me with booting.img recovery.img
6 times downloaded firmware but I still got corrupted file
Click to expand...
Click to collapse
Bro, join telegram channel. you will get better support.
Telegram channel's full of impatient youth who are irreverent, arrogant and talk in pidgin English....If you fit the bill, you'll fit right in....
puttr said:
"The current image(boot/recovery) have been destroyed and can not boot.
Please flash the corret image"
Hey guys can someone help me ?
my device can't booting, because I patched my boot.img because I need to root it, and I don't have stock boot.img
Already downloaded from stock rom 4 times and corrupt
but I still can use the bootloader / fastboot
Maybe someone can help me with the boot.img ? I mean send/upload it
NB : I'm in .14 Rom
My device already unlocked/UBL
Click to expand...
Click to collapse
don't panic, it's pretty easy.
all you have to do is just install boot.img in the stock room. and the problem is fixed
Boot loop
AndriezSetyawan said:
don't panic, it's pretty easy.
all you have to do is just install boot.img in the stock room. and the problem is fixed
Click to expand...
Click to collapse
Im stuck at boot loop pls help
aslo give me the telegram link
Cookie Ninja said:
Telegram channel's full of impatient youth who are irreverent, arrogant and talk in pidgin English....If you fit the bill, you'll fit right in....
Click to expand...
Click to collapse
excuse me, wtf?
---------- Post added at 06:12 AM ---------- Previous post was at 06:11 AM ----------
malakaz27 said:
Im stuck at boot loop pls help
aslo give me the telegram link
Click to expand...
Click to collapse
may I know what you were doing before bootloop?
also feel free to join https://t.me/realme3pros
malakaz27 said:
Im stuck at boot loop pls help
aslo give me the telegram link
Click to expand...
Click to collapse
join this group https://t.me/r3pindonesia
your problem has fixed
same problem with me pls hlp
i got the same problem please heeeeeeeeeeeeeeelp i hope to fing solution quickly
I have the same problem.i am going to flash all image files throuh fastboot.i will confirm here if it works
well, but i dont know how to flash
venky34268 said:
I have the same problem.i am going to flash all image files throuh fastboot.i will confirm here if it works
Click to expand...
Click to collapse
i searched a lot and i ddnt find except one flash file .ofp and i dont know how to flash it ... pls tell me how to flash
Follow the guide only fastboot method.
nasser.56 said:
i searched a lot and i ddnt find except one flash file .ofp and i dont know how to flash it ... pls tell me how to flash
Click to expand...
Click to collapse
https://forum.xda-developers.com/realme-3-pro/how-to/guide-to-stock-rom-stock-recovery-t3940604
the files are there with the link
my phone is done
my phone is done :fingers-crossed:
i toke it to realme warranty and they flashed it
for free
they thought i flashed it with wrong way hahaha
Help me bro
harikp6247 said:
Bro, join telegram channel. you will get better support.
Click to expand...
Click to collapse
I aslo brick my phone
boot/recovery destroyed
give me link boot.img please bro
but how?
AndriezSetyawan said:
don't panic, it's pretty easy.
all you have to do is just install boot.img in the stock room. and the problem is fixed
Click to expand...
Click to collapse
#can you give tutorial, pls help me.
venky34268 said:
I have the same problem.i am going to flash all image files throuh fastboot.i will confirm here if it works
Click to expand...
Click to collapse
if you have the img files please share the link
Mod Edit: Every member is responsible for what they do with their device. Please be sure you know what you are doing, and that the method you want to use is correct for your device.
Guys finally I found the way to recover the device.
It should work on any real me device currently I am using real me 3 pro with color OS 6.0.1.
This is the solution for recovery/ boot destroyed message.
Here are the steps :
You are probably facing this issue because you have unlocked your bootloader.
First of all you have to lock bootloader of real me 3 pro using fastboot
Reboot your phone to bootloader mode
And connect to computer with USB.
here are the commands to lock the bootloader
fastboot oem lock
fastboot flashing lock -- this one I used
fastboot oem relock
( No need to use all you can try anyone of them )
Once you type this command in computer and hit enter it will ask to confirm the lock on phone
Use volume down keys for confirmation.
So here is the trick,
Color OS recovery is made to wipe the data whenever you lock / unlock bootloader.
So once you lock your bootloader on you real me 3 your color OS recovery will pop up ( even it is broke) for some seconds which will format your internal data.
Once you format the data your phone again will boot to recovery mode and same error will popup
" Boot / recovery has been destroyed "
Don't worry
Again power off the device wait for 10 seconds and reboot to bootloader mode not to recovery (very Imp) by pressing volume down + power key
Now you will boot in color OS recovery
( Note : if you didn't succeed try the above step 3-4 time because it took 3 attempt for me )
Surely you will boot in color OS recovery.
Now download the color OS OTA update file to your Memory card
( It is necessary to use SD card )
link :
https://www.realme.com/in/support/software-update
Download the latest firmware ozip file
Now create the folder in memory card and paste the firmware file over there
If you are already in color OS recovery don't reboot the phone just insert the SD card and select update. Select storage as
SD card
Select the folder and file and update.
It will take few minutes and you will be able to successfully boot in stock color OS ROM.
Enjoy.
You know the best part that I am writing this blog from the same phone only.
when i select the ozip file for update the processing stuck on 30%. thn faild
when i select the ozip file for update the processing stuck on 30%. thn failed
SharonBlack said:
when i select the ozip file for update the processing stuck on 30%. thn failed
Click to expand...
Click to collapse
Looks like the ozip file is not downloaded properly
Download the diffrent version and check
You can also try to flash the flashable zip from xda without bloat...
different ozip installation also failed
hacker786 said:
Looks like the ozip file is not downloaded properly
Download the diffrent version and check
You can also try to flash the flashable zip from xda without bloat...
Click to expand...
Click to collapse
flashable zip support stock recovery?? different ozip installation also failed .so plz help me
---------- Post added at 05:34 AM ---------- Previous post was at 05:01 AM ----------
hacker786 said:
Looks like the ozip file is not downloaded properly
Download the diffrent version and check
You can also try to flash the flashable zip from xda without bloat...
Click to expand...
Click to collapse
i also tried a14,a8 ozip stock rom.but after starting installation 2 minutes then failed
Unlocking Bootloader1. Make sure you have a sim and active mobile data. Then go to about phone tap build number 7-8 times. After that go to advanced settings > developer options > turn on OEM unlocking and then check if this device is secure and click add account and device.
2. Download Mi unlock tool from here. Extract it and paste it in C:/unlock. or else your device won't be recognized for unlocking.
3. Open Mi unlock tool and then enter the Mi account which was on your device. Put your device in fastboot mode by pressing vol- and power and then connect to PC. Press unlock and if it tells you to wait you have no other option but to wait. If your mi flash tool shows connect your device even after you have connected it. Follow this guide here.
4. After you have unlocked your bootloader reboot your phone.
Flashing TWRP and Rooting via magisk
1. Download this TWRP image here. Thanks to the original developer mauronofrio.
2. Download adb and fastboot tools here and install it.
3. Now put your phone in fastboot mode and connect it with your pc. Now where you have downloaded the TWRP file rename it to TWRP.img and open a CMD window there if you don't know how just google.
4. Type the following commands
1. fastboot devices
2. fastboot flash recovery TWRP.img
3. fastboot reboot recovery.
Click to expand...
Click to collapse
5. Your phone will boot into TWRP now. But TWRP will be overwritten by stock miui recovery to stop that you need to flash Magisk. Download this zip move it to internal storage then flash by tapping on install and swipe to flash. Reboot your device. Reboot to recovery again to check if TWRP is present.
Now your device is rooted
OR
Flash latest OrangeFox Recovery if you don't want magisk.
Flashing A rom
1. Download.
2. Flash.
3 Format Data.
Done
Feel free to ask any questions. And don't point a finger at me for messing your device.
My mi unlock tool says can't get info. I using Indian version miui 12
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
igeekyayush said:
My mi unlock tool says can't get info. I using Indian version miui 12
Click to expand...
Click to collapse
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Doombuggie85 said:
Thanks for the useful guide. I have a quick question, does this works with MIUI 12?
Click to expand...
Click to collapse
Yes, it does.
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
LoadOP2 said:
Sorry for late reply. Have you installed the drivers correctly? Try using another port in your pc or use this mi unlock tool version zip
Click to expand...
Click to collapse
igeekyayush said:
hello,
thanks for the reply sir. yes i've tired changing port, pc everything. today i've factory reset my phone and added mi account and now i'm getting 7 days wait time. let's see now
Click to expand...
Click to collapse
Okay keep the sim inserted and use the device for 7 days. And if it doesn't work try using older version of unlock tool.
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
---------- Post added at 06:48 PM ---------- Previous post was at 06:46 PM ----------
I've unlocked the bootloader using the unlock tool and waited for 7 days,
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
_benedict_ said:
Hi there!
Silly question: is it possible to install TWRP but keep the official ROM? (phone is unlocked)
Click to expand...
Click to collapse
Skip the flashing a rom part and you will be good to go.
But i rooted the device using a different method where i patched a boot.img and flashed that to the device.
Will this method still work for me as I'm already rooted but just want TWRP so i can flash other ROMs.. The post says you have to flash magisk from the (temporary) TWRP for the TWRP to stay as the recovery..
Will the magisk on my phone and the magisk installed here collide?
I just want TWRP so i can switch to a custom rom, so any input is appreciated!!
Click to expand...
Click to collapse
You can flash twrp and then check if it persists. If not flash magisk again their is no thing as magisk colliding lol. Just make sure you flash a newer version. And if nothing works flash stock rom and then twrp.
If you have the stock boot IMG flash it and then intsall twrp and magisk.
smsry said:
Flashing a custom rom is optional. You don't NEED to flash a rom to get TWRP...
Click to expand...
Click to collapse
LoadOP2 said:
Skip the flashing a rom part and you will be good to go.
Click to expand...
Click to collapse
Haha, makes sense! Thank you for your answers
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
smsry said:
Nevermind.. i got it to work pretty easily..
I have twrp on this device and Pixel Experience ROM and it's working all fine..
But there's this one thing where when booting to recovery, it asks me to input a password for User(0) when i try to input anything it says password failed..
From reading the log, it says it's for decrypting data(8f I'm not mistaken)
Is this important? Do i need to decrypt it?
Currently the ROM works fine with no errors, so I'm not gonna bother, but would still like to know what this "decrypting" thing is..
Click to expand...
Click to collapse
Yes, If you use a lock screen enter that password it will be decrypted. You will have to format data if you decide to flash any other rom anyway.
flashed twrp but not able to boot into recovery.
igeekyayush said:
flashed twrp but not able to boot into recovery.
Click to expand...
Click to collapse
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Sir ive used xiaomi flashtool v2 after that and it worked. Thanks sir. After that i updated to latest twrp from that chinese one.
LoadOP2 said:
There can be many reasons for that. Please tell me the error or what's actually happening. Then only I can be of help.
Click to expand...
Click to collapse
Joyeuse
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
rfguy said:
Hello, Does it work for Joyeuse (European version)?
The name of TWRP says Curtana -Unified
Click to expand...
Click to collapse
Yes Unified means all Snapdragon 720g Devices which include Joyeuse, Curtana, Gram, Excalibur.
Hey buddy, thank you for this quick step-by-step guide. I flash ROMs since 2012 and you know what? It helped me the same. Having all stuff needed for go from stock to custom concentrated in one place (plus some useful tip like the Magisk flash at the end) it's always useful and time-saving. Thank you
2 Micro-notes about fastboot btw:
- write 'fastboot (with lowered 'f'): it may confuse some newbie
- it's 'reboot' instead of 'boot'