I hv tried too many Dolby digital Plus zip file, with seLinux premessive mode. But none works. The app always force closed. Plz help
Problem solved. first install viper reborn magisk.then reboot, open viper app. It will say the driver are missing, download drivers by pressing the download bottom and granting root access. The phone will reboot. Then install dolby digital plus magisk. reboot. Vola! working fine.
r0ngm0sal0 said:
Problem solved. first install viper reborn magisk.then reboot, open viper app. It will say the driver are missing, download drivers by pressing the download bottom and granting root access. The phone will reboot. Then install dolby digital plus magisk. reboot. Vola! working fine.
Click to expand...
Click to collapse
Is there any download link for viper reborn magisk. I didn't found any reborn version. Please help
Just Download viperfx from magisk repo download section...
Or Use this one.
hi , my dolby app is crashing too 11.0.8 , installed all of these software
Download SeLinux Changer (doesn't install)
Download Audio Modification Library :
Download Audio Compatibility Patch
Download Dolby Sound Mod for Android 10
Download SeLinux Permissive
and even viperfx , it keep crashing, any help ?
edit: driver for viperfx doesn't install. maybe this is the problem, any help ? thanks
Related
working beautifully and tested on CM12.1.
Also note that this works with viper4android too.
Original Thread
http://forum.xda-developers.com/android/apps-games/mod-maxxaudio-t3118983
download link
http://forum.xda-developers.com/devdb/project/dl/?id=12642
Enjoy!
Edit: for those who wants to know how to install it
1) download the file
2) place it in memory card
3) flash via custom recovery
Does it conflict with default audiofx? How to get this fully working without CM audiofx not interfering?
ujilraj said:
Does it conflict with default audiofx? How to get this fully working without CM audiofx not interfering?
Click to expand...
Click to collapse
This is a bit tricky to reply as i always remove audio fx and replace it with viper.
In theory it should work with audiofx too as it is working fine with viper
How did u remove audiofx completely?
I have a ViPER4AndroidFX apk file which asks me to install driver during installation. But on reboot, i still get audiofx option in musicFX option of poweramp.
i'm going to do the installation as follows. Correct me if i'm wrong.
1.
If i remove the audiofx app using titanium backup, will it remove the whole audiofx from the rom? I want to remove audio fx completely.
2.
After that, i should flash the MaxxAudio - 64Bit zip from recovery.
3.
Reboot & install ViPER4AndroidFX apk & do steps as viper demands.
4.
All should be working.
How to check whether MaxxAudio - 64Bit & ViPER4AndroidFX are working? Where can it be verified?
I know it's lots of qt's, but i'm taking it as a precaution & also want to get fidelity at it's best
ujilraj said:
How did u remove audiofx completely?
I have a ViPER4AndroidFX apk file which asks me to install driver during installation. But on reboot, i still get audiofx option in musicFX option of poweramp.
i'm going to do the installation as follows. Correct me if i'm wrong.
1.
If i remove the audiofx app using titanium backup, will it remove the whole audiofx from the rom? I want to remove audio fx completely.
2.
After that, i should flash the MaxxAudio - 64Bit zip from recovery.
3.
Reboot & install ViPER4AndroidFX apk & do steps as viper demands.
4.
All should be working.
How to check whether MaxxAudio - 64Bit & ViPER4AndroidFX are working? Where can it be verified?
I know it's lots of qt's, but i'm taking it as a precaution & also want to get fidelity at it's best
Click to expand...
Click to collapse
i have this viper installer that always removes audiofx automatically. after that its as easy as flashing the zip.
once inside maxxaudio... adjust to your liking while listening to music. it also has an on off switch where you can verify its working. enjoy!
Sup people. This guide is adapted from this one
First and foremost, I'd recommend that anyone who uses magisk installs this module
1. Freeze any other audioFX, musixFX, dolby service etc using titanium backup
2. Rename /system/ect/audio_policy.conf to audio_policy.conf.bak
3. Install Selinux permissive script thru magisk
4. Install busybox thru magisk or play store
5. Install v4a thru magisk repo or here. (IF not installed thru magisk, you must install it as a system app. Do this by moving it to /system/app and setting permissions to rw-r--r--)
6. Reboot
Profit
ARISE Magnum Opus works fine. No need to do all this stuff
Wahoux said:
ARISE Magnum Opus works fine. No need to do all this stuff
Click to expand...
Click to collapse
Bro, Arise Magnum Opus is an app?
Does it actually process though? That's been my big issue is viper says it is supported but never processing. Been that way ever since like Android 6 for me. Hit or miss processing. (never worked over a USB DAC). Does it process through the headphones with the dongle?
Edit: I installed the Arise Magnum Opus version of Viper.
It's a bit complicated. More than the standard flash a zip and have it work. But I got it working now. And processing through the DAC. My issue was it not processing GPM streams. Arise has a toggle for deep buffer for streaming that had to be turned off.
Has anybody been able to install viper4Android on their moto g power? I can't seem to get the driver to install.
rafe83 said:
Has anybody been able to install viper4Android on their moto g power? I can't seem to get the driver to install.
Click to expand...
Click to collapse
I got it to install on Omni 11 but it doesn't work, sadly. Also a HUGE drain on the battery just having it installed. I'd say just stick with the built-in dolby stuff. Works better than I expected, although I do prefer V4A when it comes to headphones and sound systems.
Oh wow. That's a bummer. Viper4android is one of the main reasons why I still root my phones. The combination of dolby and viper on my OnePlus 7 pro is amazing.
yes it works and it works as intended. Complete the following steps to get it working and installed correctly. First you must download and install through magisk manager the audio compatibility patch (acp) after that install the newly updated viper4android zip from magisk as well and after it's done don't reboot just open the viperapp grant it super user permissions then it will install drivers and reboot automatically. Once booted back up your viper should be working normally
Ljrouse5 said:
yes it works and it works as intended. Complete the following steps to get it working and installed correctly. First you must download and install through magisk manager the audio compatibility patch (acp) after that install the newly updated viper4android zip from magisk as well and after it's done don't reboot just open the viperapp grant it super user permissions then it will install drivers and reboot automatically. Once booted back up your viper should be working normally
Click to expand...
Click to collapse
Unfortunately doesn't work for me. I'm on RR OS and tried numerous methods including the one you mentioned and it still keeps asking to install the driver again and again.. .
As the title says, is it possible.and how to successfully install Viper4Android to Renoir, running MIUI 12.5+, A11 - assuming that the phone is already rooted by Magisk
Or at least, how to successfully install JanesDSP
If you have already Magisk and rooted your phone, you can install the module of Viper with it.
Thoiareg said:
If you have already Magisk and rooted your phone, you can install the module of Viper with it.
Click to expand...
Click to collapse
Did you try and does it really work for you?
I've posted to Viper4Android thread with more details - Viper4Android apk can never find drivers:
- It asks to install drivers and to reboot
- After rebooting and reopening, Viper4Android apk again does not find drivers and asks to install and to reboot
- It can go endlessly
I tried with AML, by debloating' MusixFM, no avail
---
Similarly, I tried but cannot properly install JamesDSP
It's app always crashes, with exception saying that it cannot find drivers
Reported also to JamesDSP thread
---
In both threads there are several other users with the new A11 phones who report the same problems (cannot install Viper4Android, neither JamesDSP)
Frankly, I don't have Renoir - I have Lisa (Xiaomi 11 Lite 5G NE), with MIUI 12.5.8, A11.
Still, I wanted to ask if somebody with the similar Renoir (Mi 11 Lite 5G) succeeded to install V4A or JamesDSP?
zgfg said:
Did you try and does it really work for you?
I've posted to Viper4Android thread with more details - Viper4Android apk can never find drivers:
- It asks to install drivers and to reboot
- After rebooting and reopening, Viper4Android apk again does not find drivers and asks to install and to reboot
- It can go endlessly
(...)
Click to expand...
Click to collapse
The magisk module is not a apk. It't a zip file.
Best Magisk modules
Looking for some of the best Magisk modules for modding? We’ve got all the information you need to get started right here. Read on!
www.xda-developers.com
Thoiareg said:
The magisk module is not a apk. It't a zip file.
Best Magisk modules
Looking for some of the best Magisk modules for modding? We’ve got all the information you need to get started right here. Read on!
www.xda-developers.com
Click to expand...
Click to collapse
Sorry, I'm 5 years user of V4A, used successfully on 5 phones so far - I perfectly know what is Magisk, Magisk modules, V4A module, how it installs, etc
I'm talking about the Viper4Android application that installs with the module and serves for managing presets, kernels, etc
If you have practical advice how to install to the new MIUI release.(that you can prove that it works), fine - otherwise please let's stop wasting the time
Good night
zgfg said:
Sorry, I'm 5 years user of V4A, used successfully on 5 phones so far - I perfectly know what is Magisk, Magisk modules, V4A module, how it installs, etc
I'm talking about the Viper4Android application that installs with the module and serves for managing presets, kernels, etc
If you have practical advice how to install to the new MIUI release.(that you can prove that it works), fine - otherwise please let's stop wasting the time
Good night
Click to expand...
Click to collapse
Sorry, but I don't know you.
So, I answer according to the information you give in your message.
You have a problem installing Viper, I suggest you install it via Magisk. And you answer by talking about an apk file. So your answers don't make sense.
Now be nicer to people who respond to you and try to help you.
Good luck in your problem.
Solved by temporarily disabling USNF 2.2.1 - then JamesDSP installed correctly.
Later I re-enabled USNF and now both modules work correctly
Still I wasn't able to make V4A working
Anyway, closing the thread
THREAD LOCKED
Requested by OP.
Regards,
shadowstep
Forum Moderator
Hola Amigos,
I have A Mido (2GB RAM) device with Superior OS (Phoniex,Android Q) Installed.I installed Magisk and whenever I flash any modules,
Magisk Crashes(Not Magisk Manager).Here's what I mean:The wallpaper I apply using Magisk get reset to default one.
Many Automatic Modules(Modules that start woring on boot) stop for 5-10 seconds and then work. App that I was using before the
crash also crashes.
It happens pretty frequently.
I installed Magisk like this:
Booted to TWRP
Wiped System,Dalvik,Vendor,Data,Cache
Formatted Data
Flashed Superior OS,Open Gapps Pico A10
Rebooted to System
After setting up Google
Rebooted to TWRP
Flashed Magisk 24.3.zip
Rebooted to System.
Installed Each Module one at a time and Rebooted,Then installed second module.....
Sometimes even of I don't install any module the Magisk Manager crashes.
The Modules that I use:
Google Sans Font System Lessly : https://www.pling.com/p/1457664/
MIUI Wallpaper and Akira Wallpaper(Live) : https://www.pling.com/p/1423749/
JamesDSP : https://zackptg5.com/downloads/jdsp_v4.4.zip
XDA Thread of (JamesDSP) (This is not a module): https://forum.xda-developers.com/android/apps-games/app-reformed-dsp-manager-t3607970
Naruto Sharingan BootAnimation for all devices : https://www.pling.com/p/1595951/
Godspeed Mode V X7 All devices : https://www.pling.com/p/1596710/
I am on stock kernel and TWRP 3.5.1
How can I fix these Crashes??
Also Fingerprint and auto rotate sensor are not working even if I uninstall Magisk,Whereas it works if I use UBPorts
Alpha V 1.1
Thanks for help!!!
I have same problem since I updated magisk to 26.1 and when I downgrade it to 25 or 24 stell same problem I tried to change magisk to kernel su the new root app and when I try to add one module at least It makes my app crash but it work only to give root access to any app I want and it is hidden from any app can detect root like bank apps this is crash log of one app of though apps https://bin.kv2.dev/~645360ede599576ea02c5490
And the screen shot the tree apps that crash when use modules
Mady_H said:
I have same problem since I updated magisk to 26.1 and when I downgrade it to 25 or 24 stell same problem I tried to change magisk to kernel su the new root app and when I try to add one module at least It makes my app crash but it work only to give root access to any app I want and it is hidden from any app can detect root like bank apps this is crash log of one app of though apps https://bin.kv2.dev/~645360ede599576ea02c5490
And the screen shot the tree apps that crash when use modules
Click to expand...
Click to collapse
Turns out James dsp and boot animation modules caused the crashes . Safety Net fix and shamiko did not cause the crash . Maybe you could try uninstalling unnecessary modules , btw which modules do you use ?
LolFlasherNoob said:
Turns out James dsp and boot animation modules caused the crashes . Safety Net fix and shamiko did not cause the crash . Maybe you could try uninstalling unnecessary modules , btw which modules do you use ?
Click to expand...
Click to collapse
Iam using ahamiko and safety net fix and hide my app list and ls posed I tried to add zygisk on kernelsu and when I did that it made my apps crash again and I tried to add module to install metrolla dailer phone to record calls it made my apps crash and ls posed zygisk didn't make any thing
So what is common with zygisk for kernelsu and jsp and boot animation
+
I will try to clean install the rom and root again to see what is going on and try to flash new rom to see if it is common in another rom or not
Mady_H said:
Iam using ahamiko and safety net fix and hide my app list and ls posed I tried to add zygisk on kernelsu and when I did that it made my apps crash again and I tried to add module to install metrolla dailer phone to record calls it made my apps crash and ls posed zygisk didn't make any thing
So what is common with zygisk for kernelsu and jsp and boot animation
+
I will try to clean install the rom and root again to see what is going on and try to flash new rom to see if it is common in another rom or not
Click to expand...
Click to collapse
Consider this guide .
Although it's for redmi note 11 , the rom flashing part is universally applicable to all devices.
[GUIDE] LATEST/UNIVERSAL FLASHING GUIDE FOR TWRP,OTHER RECOVERY AND ALL ROMS [Spes/Spesn] Redmi Note 11
: Combined four How To Guide threads into one. Post #2 - LATEST FLASHING GUIDE FOR TWRP AND OTHER RECOVERY [Spes/Spesn] Redmi Note 11[WINDOWS-Only] Post #3 - LATEST FLASHING GUIDE FOR TWRP AND OTHER RECOVERY [Spes/Spesn] Redmi...
forum.xda-developers.com