Related
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
We are waiting for AD release. At least a beta?
mido25 said:
We are waiting for AD release. At least a beta?
Click to expand...
Click to collapse
Don't you know how to use the JustArchi's github?
Wow, really helps. I wish I have my OnePlus2 now.
Guihardrock said:
Don't you know how to use the JustArchi's github?
Click to expand...
Click to collapse
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
mido25 said:
No sir. I do not know. Once I tried downloading a build from the below location and tried flashing it but recovery didn't allow me to flash it.
https://t.co/96EZIl6dJJ
I don't know why is it failed. My knowledge about github and making builds are limited.
Click to expand...
Click to collapse
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Guihardrock said:
ok so i will explain you when you download that file you have to unzip it and then you will have a folder with another folder (if you choosed unzip in archidreoid etc.zip so inside that folder you will have the necesary files (view the attached screenshot) you will have to pack them in a zip file
hope it helps but try to download the latest file to do that cause last time i tried the oneplus2 archidroid there were things that dint work such as ad filter
Click to expand...
Click to collapse
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
mido25 said:
Thanks a lot for your guidance. Appreciate if you can give a link to his latest build.
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Lost recovery
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
JustArchi said:
At the moment we have rather dfficult situation because custom ROMs based on AOSP (such as my AD which is not yet public) require previous OOS LP firmware, while OOS 3.0 includes new MM firmware which breaks both older recoveries and custom ROMs.
As I need to switch between OOS 3.0 and my AD quite frequently, I created two helpful flashable zips so I can do that easily, and because it's useful for me, perhaps it'll be useful for you too.
Download: MM | LP
Instructions:
- Download the firmware you want (or both, if you want easy switching)
- Unpack downloaded zip, you'll find firmware-update.zip and recovery.img inside
- Put both of those files on your phone, in appropriately named directory such as "firmware-LP" or "firmware-MM"
- When you will need to do a switch, simply firstly flash firmware-update.zip, then flash recovery.img as recovery image via "flash image" option in TWRP
- Reboot to load new firmware
That's it, this way you firstly flash chosen firmware version, and then TWRP recovery that works with it.
So if you have two TWRP backups - one of OOS 3.0 and one of CM13.0, make sure that you have proper firmware (and recovery) after restoring backup - LP for CM13.0, and MM for OOS 3.0.
Situation should soon improve (when OnePlus pushes kernel sources, and MM-based ROMs will rebase), but until then it's wise to keep both of those firmware + recovery combos on your sd card, so you can do a switch without any problem on as-needed basis.
Hope it helps. Try to be careful with those, if you mix up wrong recovery with wrong firmware you'll need to flash proper recovery.img variant via fastboot. You can't hard brick anything by using those files, in worst case soft-brick if both your recovery and your ROM will be for wrong firmware you have.
Have fun.
Click to expand...
Click to collapse
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
eswa1068 said:
Hi sir,
I have flashed MM using the TWRP recovery as normal. But now I have lost my recovery. I am not able to boot into any recovery. Pls help.
Click to expand...
Click to collapse
Use fastboot to flash the recovery
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
Thank you Sir
Tierri said:
Your ll recovery is in chinese. How to change it?
EDIT: Forget it. I found where to change the language! Thanks.
Click to expand...
Click to collapse
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
amit_sen said:
Hi,
Can u let me know where to change the language of twrp ?
Sent from my ONE A2003 using Tapatalk
Click to expand...
Click to collapse
Yes. See the images to help you.
Guihardrock said:
Here you go https://github.com/ArchiDroid/ArchiDroid/archive/oneplus2-cm-experimental.zip but its experimental so you can expect bugs
Click to expand...
Click to collapse
It's around 900 mb zip..?
And did anyone try that build..?
Mohit31 said:
It's around 900 mb zip..?
And did anyone try that build..?
Click to expand...
Click to collapse
Its because of the aroma you can choose the gapps of your choice...
Guihardrock said:
Its because of the aroma you can choose the gapps of your choice...
Click to expand...
Click to collapse
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
This thing should be STICKY
Finally was able to install CM13 properly using this recovery without Google Services crashing.
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
Now i am in oos3 but when justarchi release archidroid i wont use any other rom, i had so great experience with this on my s3
Edit: i am gonna try it :3 yo made me do it
Mohit31 said:
OK... Thanks
Btw Are you on this build..
A quick feedback on the ROM would be great
Click to expand...
Click to collapse
rom is smooth as h*ll and battery is better than in normal cm13 but as i said the backed dont work yet :3 and aroma is not fully functional with the bootanimation and root (but the rom has the cm superuser)
These two zips should help you to switch between old and new firmware
Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0
Use for CM13 with old Kernel(before 3rd June), OxygenOS 2.X.X, HydrogenOS LP
Link v2: Old Firmware (OOS 2.2.1)
Link v3: Old Firmware (OOS 2.2.1-1)
Link v4:Old Firmware (OOS 2.2.1-2)
Changelog
v2: TWRP error 6 is fixed - new updater-script
v3: recompiled TWRP with english language pack only
v4: newest firmware form OOS 2.2.1-2
Install Steps:
1. Reboot into TWRP
2. Flash Switch_tOS2xx_CM13.zip
3. Reboot into TWRP
4. Install CM13 or OOS2.x.x based ROM
Switch_tOS3_H2OSMM: New Firmware + TWRP Hybrid(v1-v3,v5)/GraraksTWRP(v4)
Use for CM13 with new Kernel(since 3rd June), OxygenOS 3.0.0/3.0.1, HydrogenOS MM
For use with OFFICIAL CyanogenMod 13 NIGHTLY/RR/BlurOS/Beanstalk/AOSP-CAF/AOSPA/H2OS1.4/OOS3.X.X
Link v1: New Firmware(H2OS MM) with Hybrid TWRP v2
Link v2:New Firmware(OOS 3.0.0) with Hybrid TWRP v2
Link v3: New Firmware(OOS 3.0.1) with Hybrid TWRP v2
Link v4: New Firmware(OOS 3.0.1) with Graraks TWRP
Link v5: New Firmware(OOS 3.0.2) with Hybrid TWRP v3
Link v6: New Firmware(OOS 3.0.2) with Hybrid TWRP v3.2
Link v7: New Firmware(OOS 3.0.2) with Hybrid TWRP v3.3
Changelog
v1: TWRP has all language packs
v2: TWRP has only english language pack
v3: newest firmware from OOS 3.0.1
v4: Graraks Recovery with OTG support
v5: OOS 3.0.2 firmware, Hybrid TWRP v3
v6: Hybrid TWRP v3.2
v7: Hybrid TWRP v3.3, changed automatic reboot delay to 3 seconds
Install Steps:
1. Reboot into TWRP
2. Flash Switch_tOS3_H2OSMM.zip
3. Reboot into TWRP
4. Install H2OS MM or OOS3 based ROM
Fastboot Version V4:
Download
Thanks to @WhyOrean for the TWRP Hybrid
flo071 said:
Hi,
these two zips should help you to switch between old and new firmware
Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0
Link: https://www.dropbox.com/s/i5jusu831huxpuv/Switch_tOS2xx_CM13.zip?dl=0
Switch_tOS3_H2OSMM: New Firmware + TWRP Hybrid
Link: https://www.dropbox.com/s/bk1dev25xo5ebej/Switch_tOS3_H2OSMM.zip?dl=0
Thanks to @WhyOrean for the TWRP Hybrid
Click to expand...
Click to collapse
Similar to @JustArchi's Helper zips to switch between OOS 3.0 and OOS 2.2.1 firmware then?
Spannaa said:
Similar to @JustArchi's Helper zips to switch between OOS 3.0 and OOS 2.2.1 firmware then?
Click to expand...
Click to collapse
little bit.... but mine has twrp included...
i did not copy it... if u wanted to say that...
flo071 said:
little bit.... but mine has twrp included...
i did not copy it... if u wanted to say that...
Click to expand...
Click to collapse
No, that's not what I meant - I just wondered what the difference was.
JustArchi's includes TWRP too but it's not flashed directly via the updater-script as this sometimes fails.
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
vergilbt said:
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
Click to expand...
Click to collapse
Same issue here. Had been running OOS3 beta and have struggled to install anything else since.
EDIT: Looks like JustArchi zip gives the same error... currently no way to go back to 2.XX short of using the Quallcomm tool?
vergilbt said:
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
Click to expand...
Click to collapse
boboskins said:
Same issue here. Had been running OOS3 beta and have struggled to install anything else since.
EDIT: Looks like JustArchi zip gives the same error... currently no way to go back to 2.XX short of using the Quallcomm tool?
Click to expand...
Click to collapse
hmmm.... strange...
i ll try to fix this...
thanks for the Screenshot
vergilbt said:
To use in twrp?
I'm on OOS3.0. and can't flash SWITCH_TO_OOS2.0.ZIP
Click to expand...
Click to collapse
boboskins said:
Same issue here. Had been running OOS3 beta and have struggled to install anything else since.
EDIT: Looks like JustArchi zip gives the same error... currently no way to go back to 2.XX short of using the Quallcomm tool?
Click to expand...
Click to collapse
new one is here with new updater-script
https://www.dropbox.com/s/xl8ny63m6u27tbr/Switch_tOS2xx_CM13v2.zip?dl=0
flo071 said:
new one is here with new updater-script
https://www.dropbox.com/s/xl8ny63m6u27tbr/Switch_tOS2xx_CM13v2.zip?dl=0
Click to expand...
Click to collapse
tested and works fine. :good:
Thanks. Very useful. May I only ask for an english based twrp in switch to oos2?
Inviato dal mio iPhone utilizzando Tapatalk
fmotta said:
Thanks. Very useful. May I only ask for an english based twrp in switch to oos2?
Inviato dal mio iPhone utilizzando Tapatalk
Click to expand...
Click to collapse
you can change the language in the settings
flo071 said:
new one is here with new updater-script
https://www.dropbox.com/s/xl8ny63m6u27tbr/Switch_to_OOS2xx_CM13v2.zip?dl=0
Click to expand...
Click to collapse
Thx...
Is working in both directions
[emoji106]
flo071 said:
you can change the language in the settings
Click to expand...
Click to collapse
I am stupid [emoji23] [emoji23] [emoji23]
sorry but, what happens of i install cm13 with oxygenos3.0 firmware?
flo071 said:
Hi,
these two zips should help you to switch between old and new firmware
Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0
Link v1: [url]https://www.dropbox.com/s/i5jusu831huxpuv/Switch_tOS2xx_CM13.zip?dl=0[/URL]
Link v2: https://www.androidfilehost.com/?fid=24533103863138111
v2: TWRP error 6 is fixed - new updater-script
Switch_tOS3_H2OSMM: New Firmware + TWRP Hybrid
Link: https://www.androidfilehost.com/?fid=24533103863138121
Thanks to @WhyOrean for the TWRP Hybrid
Click to expand...
Click to collapse
Hi, please write Aldo how To use them..so, if i'm on hydrogenos i nees To flash "Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0", reboot in twrp and flash cyabogenmod 13?or not?just flash it AMD suddendly cyanogenmod?
Maxximo88 said:
Hi, please write Aldo how To use them..so, if i'm on hydrogenos i nees To flash "Switch_tOS2xx_CM13: Old Firmware + TWRP 3.0.2-0", reboot in twrp and flash cyabogenmod 13?or not?just flash it AMD suddendly cyanogenmod?
Click to expand...
Click to collapse
hi,
for cm13/oos2x:
1. reboot into TWRP
2. flash the switch_to_cm13_oss2.zip
3. reboot into TWRP
4. flash a cm13 or oos2 based rom
flo071 said:
hi,
for cm13/oos2x:
1. reboot into TWRP
2. flash the switch_to_cm13_oss2.zip
3. reboot into TWRP
4. flash a cm13 or oos2 based rom
Click to expand...
Click to collapse
Thanks, so reboot required between flashing thr zip amd the ROM!this info could be useful in the first topic
Maxximo88 said:
Thanks, so reboot required between flashing thr zip amd the ROM!this info could be useful in the first topic
Click to expand...
Click to collapse
yes because it needs to load the new installed twrp
flo071 said:
yes because it needs to load the new installed twrp
Click to expand...
Click to collapse
I saw you've added this pocket guide in the first topic, thanks!
it´s working! now testing CM13 from Oxygen OS3 =)
there's so many, not sure which one I should choose
Pitchblack recovery. Imo
Mcha01 said:
Pitchblack recovery. Imo
Click to expand...
Click to collapse
can u please share the link?
Sky hawk recovery project is nice imo https://forum.xda-developers.com/poco-f1/development/recovery-skyhawk-recovery-project-t3905564
Ashiq.makkar said:
there's so many, not sure which one I should choose
Click to expand...
Click to collapse
I always stick to the TWRP as many other build's are twrp driven!
twrp3.3.0 official is out but it has some touch issues to there has been twrp3.3.0-fixed-unofficial, which i am using NOW and its working perfect
please see this
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
---------- Post added at 08:31 PM ---------- Previous post was at 08:16 PM ----------
Ashiq.makkar said:
can u please share the link?
Click to expand...
Click to collapse
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
5july19 is the latest
YasuHamed said:
I always stick to the TWRP as many other build's are twrp driven!
twrp3.3.0 official is out but it has some touch issues to there has been twrp3.3.0-fixed-unofficial, which i am using NOW and its working perfect
please see this
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
---------- Post added at 08:31 PM ---------- Previous post was at 08:16 PM ----------
https://sourceforge.net/projects/pitchblack-twrp/files/beryllium/
5july19 is the latest
Click to expand...
Click to collapse
is there any bugs with the unofficial twrp??
Ashiq.makkar said:
is there any bugs with the unofficial twrp??
Click to expand...
Click to collapse
I Believe they only changed the touch drivers! i never found so far any bugs (according to the level / command i execute) flashing custom roms & magisk.
YasuHamed said:
I Believe they only changed the touch drivers! i never found so far any bugs (according to the level / command i execute) flashing custom roms & magisk.
Click to expand...
Click to collapse
Having trouble flashing TWRP trough fastboot, keep getting a small white line at the top left corner. Any idea how to avoid this, and have TWRP installed as recovery?
I use the one which is on crDroid's sourceforge page. Its called TWRP 3.3.0 beryllium fixed. It works fine for me, decrypts and touch seems fine. I tried that 3.3.1 unofficial, but that couldnt decrypt for me, it wouldnt recognise my pattern.
https://sourceforge.net/projects/crdroid/files/beryllium/TWRP/
donk165 said:
I use the one which is on crDroid's sourceforge page. Its called TWRP 3.3.0 beryllium fixed. It works fine for me, decrypts and touch seems fine. I tried that 3.3.1 unofficial, but that couldnt decrypt for me, it wouldnt recognise my pattern.
https://sourceforge.net/projects/crdroid/files/beryllium/TWRP/
Click to expand...
Click to collapse
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
YasuHamed said:
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
Click to expand...
Click to collapse
do i need to flash DFE after flashing the recovery?
Ashiq.makkar said:
do i need to flash DFE after flashing the recovery?
Click to expand...
Click to collapse
I flash DFE after ROM & Kernel (i used different kernel(s)) and before Magisk
should i flash DFE and Magisk everytime after flashing a new kernel ? even if i have flashed magisk and DFE already
YasuHamed said:
how about Twrp3.3.0-unofficial
this one
https://mega.nz/#F!bdwQVIyK!OWNLH72HNT-ecmC-vAVmPw
reference
https://forum.xda-developers.com/showpost.php?p=80122987&postcount=305
Click to expand...
Click to collapse
i flashed it via fastboot and it's showing decrypt data
Ashiq.makkar said:
i flashed it via fastboot and it's showing decrypt data
Click to expand...
Click to collapse
try flashing DFE please!
and also please tell what rom was previously installed?
YasuHamed said:
try flashing DFE please!
and also please tell what rom was previously installed?
Click to expand...
Click to collapse
I've been on global stable miui.couldn't flash DFE because Data decrypted and couldn't access storage
orangefox by far the best recovery
pitt93 said:
orangefox by far the best recovery
Click to expand...
Click to collapse
tried it.having data decrypt problem
Always use latest TWRP.
UltraSphinx said:
Always use latest TWRP.
Click to expand...
Click to collapse
having touch issues
this is the chines ROM for MIUI 11 v9.9.25 with Android 10 recovery version you can flash it with twrp from
http://bigota.d.miui.com/9.9.25/miui_DAVINCI_9.9.25_030918b882_10.0.zip
working twrp
https://androidfilehost.com/?fid=6006931924117944653
download it and download gapps for android 10 from NONE FOR NOW but you can try these
https://opengapps.org/ or here
https://drive.google.com/uc?id=1Ju8g0xLe-aMROh4f5crJoWXZ0eEK6nKX&export=download
https://www.cyanogenmods.org/downloads/bitgapps-for-android-10-download/
then magisk 9.14 for android 10 from NONE FOR NOW but you can try these
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
https://github.com/topjohnwu/magisk_files/blob/canary/magisk-release.zip
Universal DM-Verity, ForceEncrypt, Disk Quota Disablers this is necessary if you come from other custome ROMS
https://forum.xda-developers.com/android/software/universal-dm-verity-forceencrypt-t3817389
ONLY ISSUES FOR NOW
brightness sometimes deems for seconds
happy flashing
Only chinese language ?
AlexCuban said:
Only chinese language ?
Click to expand...
Click to collapse
english and chines
a review and screenshots would be very appreacheted sir
So I am in
10.12 MIUI
recovery you post it just doesn't work, fixed: used the recovery from Mauronofrio
and after format data.
LIONS1 said:
this is the chines ROM for MIUI 11 v9.9.25 with Android 10 recovery version you can flash it with twrp from
http://bigota.d.miui.com/9.9.25/miui_DAVINCI_9.9.25_030918b882_10.0.zip
working twrp
https://drive.google.com/file/d/1TSGqgarTA8yDfH0KUYSgZkGyRA_qm_vF/view
download it and download gapps for android 10 from
https://opengapps.org/ or here
https://drive.google.com/uc?id=1Ju8g0xLe-aMROh4f5crJoWXZ0eEK6nKX&export=download
then magisk 9.14 for android 10 from
https://forum.xda-developers.com/apps/magisk/official-magisk-v7-universal-systemless-t3473445
happy flashing
Click to expand...
Click to collapse
I can't seem to make twrp work with miui 11, keeps booting into fastboot no matter what, not even boots into system once i try to boot recovery first time, have to use Miflash to reciver phonr. are you sure TWRP is working?
jaggyjags said:
I can't seem to make twrp work with miui 11, keeps booting into fastboot no matter what, not even boots into system once i try to boot recovery first time, have to use Miflash to reciver phonr. are you sure TWRP is working?
Click to expand...
Click to collapse
What rom were you using to boot in that twrp?
After flash miui 11, make format data in twrp...
Boots for me, except couldnt install gapps (error 70). A working twrp is at 4pda
WsH89 said:
Boots for me, except couldnt install gapps (error 70). A working twrp is at 4pda
Click to expand...
Click to collapse
Link for download that TWRP please
juanyllo87 said:
Link for download that TWRP please
Click to expand...
Click to collapse
It's a Chinese TWRP 3.3.1 which I've seen ppl say works on the telegram group. I googled it and found this on a Chinese site which has the same file name:
https://www.lanzous.com/i6ahykh
mu1uman said:
It's a Chinese TWRP 3.3.1 which I've seen ppl say works on the telegram group. I googled it and found this on a Chinese site which has the same file name:
https://www.lanzous.com/i6ahykh
Click to expand...
Click to collapse
It's works!!! thank you so much <3
juanyllo87 said:
Link for download that TWRP please
Click to expand...
Click to collapse
Read the OP's description, but this time, slowly.
ekin_strops said:
Read the OP's description, but this time, slowly.
Click to expand...
Click to collapse
After installing Android 10, the TWRP's OP stopped working for me, the phone just got into fastboot
Sorry for my english
ekin_strops said:
Read the OP's description, but this time, slowly.
Click to expand...
Click to collapse
The TWRP in the OPs description doesn't work with android q
mu1uman said:
The TWRP in the OPs description doesn't work with android q
Click to expand...
Click to collapse
But, and this one you gave? This one, a chineses one, It Works?
Soooo. Anyone tried it already ? Is it good to go (not with twrp in OP but from the link @mu1uman posted)
Here some of the screenshots from my phone.
for the google service , just download google installer . flashing opengapps give error 7 on twrp . btw this rom is so snappy
akml3 said:
for the google service , just download google installer . flashing opengapps give error 7 on twrp . btw this rom is so snappy
Click to expand...
Click to collapse
Just download google play on mi apps
The twrp is developed by wzsx150
You can find it in Google Drive or Baidunetdisk
htt删掉ps://pan.baidu.co删掉m/s/1uA51y4删掉qqCfH1ByS删掉cP95sqw
The password is rwn2
Its also online on Xiaomi.eu, Moderator shared the Link!
https://androidfilehost.com/?fid=4349826312261719577
Don't flash magisk using the twrp. Take the old method by patching boot.img instead
zhufucdev said:
Don't flash magisk using the twrp. Take the old method by patching boot.img instead
Click to expand...
Click to collapse
I can't install zip file after flashed twrp
dugu1248 said:
I can't install zip file after flashed twrp
Click to expand...
Click to collapse
What did the log say... And what were you installing?
Bugdroid Christina said:
The twrp is developed by wzsx150
You can find it in Google Drive or Baidunetdisk
htt
Click to expand...
Click to collapse
https://forum.miuiturkiye.net/konu/redmi-k30-twrp-3-3-1-0217-tek-tus-yukleme-araci.71710/
By.TRabZonLu™ said:
https://forum.miuiturkiye.net/konu/redmi-k30-twrp-3-3-1-0217-tek-tus-yukleme-araci.71710/
Click to expand...
Click to collapse
the Chinese developer made it
Any link for the new version of TWRP?
papoy1019 said:
Any link for the new version of TWRP?
Click to expand...
Click to collapse
https://pan.baidu.com/wap/init?surl=KvgmmtY4zgVpiJ8DL7JffQ#/
password: eexd
dugu1248 said:
https://pan.baidu.com/wap/init?surl=KvgmmtY4zgVpiJ8DL7JffQ#/
password: eexd
Click to expand...
Click to collapse
had you downloaded it, ver. 3.4.1B 0317?
New TWRP is availble. If you are on Xiaomi.eu Beta its a must!
https://androidfilehost.com/?fid=4349826312261753585
Edit: Also Magisk 20.4 installation over zip works now in twrp! No complicated installation over the boot.img anymore!
Redmi K30 5G TWRP 3.4.1B 0317
Changelog:
1. Fix some compatibility issues with the new version of the official system, such as entering the twrp white screen
2. Because the new official kernel is replaced, it may not be compatible with the old official version of the system
https://androidfilehost.com/?fid=4349826312261753585
papoy1019 said:
Redmi K30 5G TWRP 3.4.1B 0317
Changelog:
1. Fix some compatibility issues with the new version of the official system, such as entering the twrp white screen
2. Because the new official kernel is replaced, it may not be compatible with the old official version of the system
https://androidfilehost.com/?fid=4349826312261753585
Click to expand...
Click to collapse
Does this recovery work for K30 4G?
kushal.purkar said:
Does this recovery work for K30 4G?
Click to expand...
Click to collapse
No, 4G is different.
Does anybody tried restoring their full twrp backup? Any issues? 5G version.
thx for the link.
but how to use twrp ?
Someone has made a tuto ?
thx
saerdryl2 said:
thx for the link.
but how to use twrp ?
Someone has made a tuto ?
thx
Click to expand...
Click to collapse
Unlock first bootloader
https://en.miui.com/unlock/
Install TWRP via Fastboot mode
Code:
fastboot flash recovery twrp.img
fastboot reboot recovery
FORMAT /data partition (NEVER wipe System or Persist!)
Copy ROM to the internal storage
Install ROM
Reboot
Done
thx dude
my memory of the phone is crypted. Pershps is this the problem.
how i can unlock my memory ?
thx