Mi A3 Fastboot Loop - Xiaomi Mi A3 Questions & Answers

Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!

Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Flash the boot.img of your current firmware version in twrp to both slots and flash twrp installer.zip afterwards then reboot. Now you will be able to boot as normal and have twrp installed also

Vsider said:
Hello I'm stuck at fastboot loop with my Mi A3 after flashing TWRP
Here is what I did:
1. unlocked bootloader
2. downloaded TWRP from here: dl. twrp. me/ laurel_sprout/twrp-3.3.1-0-laurel_sprout.img.html (cant post links, sorry)
3. installed it with fastboot flash boot twrp-3.3.1-0-laurel_sprout.img
After that the reboot is always goes into fastboot
I found the advice to change the partition - it was B and I set it to A and it could load the stock recovery, so I tried to flash TWRP again and it went to Fastboot loop again, on both partitions. No I don't know what to do.
command 'fastboot devices' - shows the device.
but I cannot boot into recovery, I tried holding power and volume up buttons many times, it always boots into Fastboot (screen with bunny and robot)
Please help!
Click to expand...
Click to collapse
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download

Rajendran Rasa said:
Don't use twrp
It'll break userdata partition
Use shrp recovery
For Android 9
https://sourceforge.net/projects/mi...RP_P-v2.2-laurel_sprout-official.img/download
For Android 10
https://sourceforge.net/projects/mi...HR_Q-v2.2-laurel_sprout-official.img/download
Shrp installer Flashable zip after flashing ROM
https://sourceforge.net/projects/mi...ller-v2.2-laurel_sprout-official.zip/download
Click to expand...
Click to collapse
TWRP breaks down? ? Man!! Everyone using it.
All the youtubers.
There is a stable twrp for a3

Related

Can't flash twrp

Recently bricked my honor 5x used fast boot to get it out of boot loop. (Because I tried to its update my phone with twrp)now when I try to re flash twrp it gets replaced by the stock recovery Everytime . Please help!
Samething happend to me... cannot flash twrp because when i restart phone after flashing twrp, it gets replaced by stock recovery.
What i do now is to boot to twrp instead of flashing using this command:
Code:
fastboot boot twrp-3.0.0-0-kiwi.img
Hopefully there is a solution for this flashing problem.
FREAK0N said:
Samething happend to me... cannot flash twrp because when i restart phone after flashing twrp, it gets replaced by stock recovery.
What i do now is to boot to twrp instead of flashing using this command:
Code:
fastboot boot twrp-3.0.0-0-kiwi.img
Hopefully there is a solution for this flashing problem.
Click to expand...
Click to collapse
you can't just reboot after flashing recovery ...you have to boot directly to twrp after the flash with power + volume up (Skip the fastboot reboot step)
the simple way is to copy kiwi_twrp_3-21_recovery.img to your sdcard
fastboot boot kiwi_twrp_3-21_recovery.img
now in twrp choose install / image / then choose kiwi_twrp_3-21_recovery.img
next choose reboot / recovery
you now have kiwi_twrp_3-21_recovery.img
from then on adb reboot recovery from android
or power + volume up will enter TWRP
clsA said:
you can't just reboot after flashing recovery ...you have to boot directly to twrp after the flash with power + volume up (Skip the fastboot reboot step)
the simple way is to copy kiwi_twrp_3-21_recovery.img to your sdcard
fastboot boot kiwi_twrp_3-21_recovery.img
now in twrp choose install / image / then choose kiwi_twrp_3-21_recovery.img
next choose reboot / recovery
you now have kiwi_twrp_3-21_recovery.img
from then on adb reboot recovery from android
or power + volume up will enter TWRP
Click to expand...
Click to collapse
Thanks alot... i wil try it later.
Too many Links is what ADB Says
RootMega said:
Too many Links is what ADB Says
Click to expand...
Click to collapse
why are you using adb ?
did you read the instructions i posted
I have the stock recovery.
I cant get into twrp.
I tried to flash then go straight to twrp which gets replaced by stock bootloader
Idk it gets replaced everytime
Okay the adb thing stopped I got into twrp by doing the fastboot thing but when i boot into recovery it goes to the stock recovery.
RootMega said:
Okay the adb thing stopped I got into twrp by doing the fastboot thing but when i boot into recovery it goes to the stock recovery.
Click to expand...
Click to collapse
I really don't know why you don't seem to get it
it's this simple
you fastboot boot kiwi_twrp_3-21_recovery.img
now while in TWRP copy kiwi_twrp_3-21_recovery.img to the phone
Also copy SuperSU-v2.64.zip (or newer) to the phone
after the files are copied choose Install / Image / kiwi_twrp_3-21_recovery.img
next choose install / SuperSU.zip
next choose Reboot / Recovery
you now have TWRP recovery and you can enter it by using power + volume up
or from an app on the phone (I use Quickboot) or from a pc with adb reboot recovery
I have the same problem, i tried with your method but the system continue to replace bootloader, impossible to keep twrp on recovery
Edit : I try to install Root Checker, it detect my phone is root but impossible to access to TWRP, very strange
clsA said:
you can't just reboot after flashing recovery ...you have to boot directly to twrp after the flash with power + volume up (Skip the fastboot reboot step)
the simple way is to copy kiwi_twrp_3-21_recovery.img to your sdcard
fastboot boot kiwi_twrp_3-21_recovery.img
now in twrp choose install / image / then choose kiwi_twrp_3-21_recovery.img
next choose reboot / recovery
you now have kiwi_twrp_3-21_recovery.img
from then on adb reboot recovery from android
or power + volume up will enter TWRP
Click to expand...
Click to collapse
Tried this on my KIW-L21, as this is the only way I did not try it yet...
Did not work, unfortunately, I assume the OP could have the same problem as I already posted in the TWRP thread:
http://forum.xda-developers.com/showpost.php?p=66678377&postcount=509
(It is a shame people spam this thread with unlocking problems, though)
EarlyMon mentioned something about dual recovery partitions here: http://forum.xda-developers.com/showpost.php?p=66838009&postcount=529
So regardless how many times I flash TWRP it wont stick until the next reboot to recovery, as it gets replaced by the stock one all the time.
I am thankful for every news on that topic and I would happily help(to the extent I am able to) getting TWRP back onto our phones :good:
P.S.: I am not quite sure if the OP has another problem in flashing the recovery, though.
Nekly said:
Tried this on my KIW-L21, as this is the only way I did not try it yet...
Did not work, unfortunately, I assume the OP could have the same problem as I already posted in the TWRP thread:
http://forum.xda-developers.com/showpost.php?p=66678377&postcount=509
(It is a shame people spam this thread with unlocking problems, though)
EarlyMon mentioned something about dual recovery partitions here: http://forum.xda-developers.com/showpost.php?p=66838009&postcount=529
So regardless how many times I flash TWRP it wont stick until the next reboot to recovery, as it gets replaced by the stock one all the time.
I am thankful for every news on that topic and I would happily help(to the extent I am able to) getting TWRP back onto our phones :good:
P.S.: I am not quite sure if the OP has another problem in flashing the recovery, though.
Click to expand...
Click to collapse
So you are booting TWRP
Installing / TWRP.Img in TWRP and Reboot recovery and your not booting to TWRP ?
Just my two cents into this thread: apparently (from my personal experience, and EarlyMon seems to back this up) the Honor 5X for whatever reason allows the installation of TWRP but still keeps Huawei's stock recovery in place, unlike most phones. What's more, it randomly (yeah, guessing it's not random obviously, but I don't have the slightest clue what the pattern might be) decides to boot into stock recovery while I use the same hardware keys that have continuously booted me into TWRP up until that point. This behavior led me to believe I had bricked my phone for a day, lol (I made a recent post about it on this forum, in case anyone cares).
Bottom line: if you can't boot into TWRP even though you made sure to install it correctly, try changing the key combo. Vol down + Power not working for you? Try Vol Up. Neither work? Try Vol Up + Down + Power. Spice it out and it might solve your problems.
clsA said:
So you are booting TWRP
Installing / TWRP.Img in TWRP and Reboot recovery and your not booting to TWRP ?
Click to expand...
Click to collapse
That is correct:
Connected Phone to PC
ADB reboot bootloader
fastboot boot kiwi.img
install image kiwi.img
reboot recovery
Tada, Stock eMUI Recovery :[
I really had hoped it would do the trick, though.
Nekly said:
That is correct:
Connected Phone to PC
ADB reboot bootloader
fastboot boot kiwi.img
install image kiwi.img
reboot recovery
Tada, Stock eMUI Recovery :[
I really had hoped it would do the trick, though.
Click to expand...
Click to collapse
what version of TWRP are you using ? whats the real file name ?
Has anyone tried flashing TWRP with TWRP Manager from the play store?
Sm0k3d 0uT said:
Has anyone tried flashing TWRP with TWRP Manager from the play store?
Click to expand...
Click to collapse
Been there and done that. Same outcome.
clsA said:
what version of TWRP are you using ? whats the real file name ?
Click to expand...
Click to collapse
The last approach was done with the one from the first post of the TWRP thread here on XDA(https://goo.gl/53xai9) "kiwi_twrp_3-21_recovery.img"
I also tried the TWRP images from https://twrp.me/devices/huaweihonor5x.html but always the same result.
I can try with a specific image, just give me a link and I'll try to flash it. :fingers-crossed:

[Q] Problem with flashing twrp on Snapdragon RM3

I downloaded the twrp .img from the official website and flashed it using 'fastboot flash recovery twrp.img' and everything was shown Okay in cmd. Then I did 'fastboot reboot' and then after phone rebooted I went to recovery mode using volume up and power button but there was no TWRP there, only stock recovery was there. What went wrong? I flashed many times but same result
I had the same result like yours several weeks ago. And finally choose another method to install TWRP. Try below thread , it is easier.
http://en.miui.com/thread-296053-1-1.html
Your stock rom is replacing stock recovery every time you boot it.
TWRP needs a modified boot image flashed to make it permanent when used with official roms.
http://forum.xda-developers.com/red...official-twrp-3-0-2-0-recovery-redmi-t3352966
If you don't have the modified boot, make sure to boot into TWRP first after flashing it.
Handy way to get TWRP booted is to temporarily boot it using "fastboot boot <name of twrp.img>"
Once booted this way, use it to flash the TWRP image, then reboot into TWRP recovery you just flashed.
Once I had that done, after making a backup, I flashed a custom rom (xiaomi.eu) and TWRP remained permanent for me.
If your wanting to stay on an official rom, see this thread which has an Universal Boot Img Patcher.
Is Your Bootloader Unlocked? Cant flash on a locked BL buddy...
To unlock, follow the Guide y Nivu
http://en.miui.com/forum.php?mod=viewthread&tid=280561&extra=&highlight=no%2Bmore%2Bverify%2Bdevice&page=41
also read reply no. 408
2. DO NOT install the official, unmodified TWRP...
select a TWRP from here
http://forum.xda-developers.com/redmi-note-3/how-to/guide-redmi-note-3-available-twrps-t3406708
I Used the cofface TWRP
3. COPY Twrp.img to internal storage.....
fastboot boot TWRP.img
4. TWRP boots automatically... Press the button on Right to change device language....
Swipe right to allow modifications
5. Go to install... > flash Image. select TWRP.img
tap on reboot.... somewhere there, you will be asked to
1. install SuperSU
2. prevent phone from reverting to original recovery...
Swipe right on both.
Cheers!
When you do the "fastboot reboot" command, you should right away , press the volume + and power buttons together, so the phone boots into TWRP and not into the system. If you just execute the command and let it go , the stock recovery overwrites TWRP.
after entering "fastboot flash recovery twrp.IMG" don't reboot and don't entre "fastboot reboot"....you have to directly press power + vol up...you will able to boot into twrp

[SD625] Trouble installing TWRP despite flashing Lazyflasher + SuperSU

Cross-post from here
I have a frustrating issue.
After booting into fastboot mode, I type the following commands where recovery.img is the TWRP mido image. I also have lazyflasher and SuperSU on my SD card, but onto that later...
I type :
Code:
fastboot flash recovery recovery.img
fastboot boot recovery.img
The phone boots into TWRP perfectly. I then flash the lazyflasher zip file. However when I try to boot back into recovery, the Mi logo briefly appears, then nothing... black screen.
So at the moment, I don't care about what is on internal storage. I went to wipe-->format data, then rebooted straight into bootloader to try and flash TWRP again. However this also gives me a black screen when I try and boot into recovery after installing Lazyflasher. I tried again, however I also flashed SuperSU immediately after lazyflasher. Rebooting into recovery from TWRP gives me a black screen again.
Should I perhaps try to flash a custom kernel? I am lost for other solutions.
TLDR: TWRP unsuccessful after: fastboot flash recovery, then fastboot boot recovery.img, then flashing lazyflasher, followed by flashing SuperSU, then choosing Reboot-->Recovery.
bigpavmate said:
Cross-post from here
I have a frustrating issue.
After booting into fastboot mode, I type the following commands where recovery.img is the TWRP mido image. I also have lazyflasher and SuperSU on my SD card, but onto that later...
I type :
Code:
fastboot flash recovery recovery.img
fastboot boot recovery.img
The phone boots into TWRP perfectly. I then flash the lazyflasher zip file. However when I try to boot back into recovery, the Mi logo briefly appears, then nothing... black screen.
So at the moment, I don't care about what is on internal storage. I went to wipe-->format data, then rebooted straight into bootloader to try and flash TWRP again. However this also gives me a black screen when I try and boot into recovery after installing Lazyflasher. I tried again, however I also flashed SuperSU immediately after lazyflasher. Rebooting into recovery from TWRP gives me a black screen again.
Should I perhaps try to flash a custom kernel? I am lost for other solutions.
TLDR: TWRP unsuccessful after: fastboot flash recovery, then fastboot boot recovery.img, then flashing lazyflasher, followed by flashing SuperSU, then choosing Reboot-->Recovery.
Click to expand...
Click to collapse
Also, once just flash lazyflasher.zip /super su from twrp > next reboot into system from twrp! Do not choose reboot to recovery for the first time. Boot to system..
Okay guys, I have found the solution, although I would still like to know WHY this happened!
I used fastboot + Xiaomi Flash Tool to flash the latest stable ROM. I then enabled USB Debugging, and did all the same steps which resulted in being able to boot into recovery normally! I didn't flash lazyflasher this time because I flashed SuperSU instead, apparently it patches the dm-verity thing too. This was a suggestion from this post

Soft brick while trying to flash TWRP

Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Ivanov93 said:
Hello to all !
In order to install Lineage OS on my Xiaomi Redmi Note 5, I was trying to flash TWRP as recovery. I was able to run successfully command 'fastboot flash antirbpass dummy.img' to skirt anti rollback, then i execute successfully 'fastboot flash recovery recovery.img' command to flash TWRP, but no way to boot on TWRP.
I tried also to run command 'fastboot boot recovery.img' but while booting it stays stucked on MI logo.
While searching for a solution I inconveniently run command 'fastboot flash boot recovery.img', so now I'm in a bootloop on fastboot mode if I press volume down and power button, or MI logo if I start in normal mode.
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
And I can not stop my phone, does it exist a command which allows to do this in fastboot or I have to wait for my phone to be without battery ?
Thanks in advance for your help !
Click to expand...
Click to collapse
I guess you have Redmi note 5 - codename: Whyred (Snapdragon 636 and with dual rear camera) so Redmi 5 plus doesn´t have ARB.
If the next recommendation doesn´t work you will find better guidance in the thread for your specific device https://forum.xda-developers.com/redmi-note-5-pro so is slightly different.
Flash again your stock boot image , reboot and check that USB debugging is enabled and start again the process:
Put TWRP in your sdcard and a copy with this name in your adb folder into pc, reboot to fastboot and first just boot to TWRP, don´t flash it in fastboot, use code
Code:
fastboot boot TWRP.img
then in TWRP flash TWRP file and flash dummy.img ARB. In the case that your counter is up to 4 here you will find the file to enable again fastboot mode https://forum.xda-developers.com/redmi-note-5-pro/how-to/index-everything-anti-roll-t3816219
Ivanov93 said:
I still have access to fastboot commands, do you know how I can do to fix it (and maybe a way to install TWRP correctly) ?
Click to expand...
Click to collapse
I will assume that you have the correct TWRP build for your device (do you have vince, or whyred?).
If you have the correct TWRP, then did you flash magisk or lazyflasher after installing TWRP?
MAAAN
Do like this: once you flashed type
Fastboot boot recoveryname.img

Cannot enter Recovery any more - maybe switched too hastily between android 9 and 10?

I have a problem that i never make it into recovery again. I am used to adb/fastboot, this is my 5th device and i happily used different custom roms as lineage, havoc, crdroid for about 7 years and thus am familiar with the concepts of a/b, recovery, adb/fastboot and so on.
Now, when i "flash_all" with stock from here (V10.3.17.0.PFQEUXM) on my a3, i suppose both slots a and b are overwritten with stock. interestingly this stock rom only boots in a-slot, not in b-slot.
when i now just "fastboot flash recovery twrp...." with 3.3.1.2 and hit the manual enter to recovery (power + vol up), i just get a "no command" error - no twrp in sight.
i also tried this with flash_all V11.0.2.0.QFQEUXM rom (a10) and fastboot flash recovery twrp 3.3.1-17 Q from mauronofrio - same result.
anyone knows what i did wrong?
basically i didnt enter team win recovery for some good amount of tries which slightly terrifies me at this point. (help)
Should i use the global versions instead of the europe ones? Do i need to use "fastboot flash BOOT twrp.." instead of "fastboot flash recovery twrp.."?
I am also happy for suggestions where i could pose this issue more appropriate.
//update: i am now in stock rom and could root it with flashing a magisked boot.img but still cannot enter twrp recovery (-> "no command").
Ya you entered the wrong command it's
Code:
fastboot flash boot twrp.img
When you boot to twrp make sure to flash stock boot.img of the firmware which you are currently running and then flash twrp installer.zip flash both of these in twrp and do not reboot between flashes
thanks @garylawwd
garylawwd said:
Ya you entered the wrong command it's
Code:
fastboot flash boot twrp.img
Click to expand...
Click to collapse
So to be sure: i have stock 11.0.3.0 europe from here installed and i am in slot a now and i cannot go into twrp because it says "no command".
i go to fastboot now, then
Code:
fastboot flash boot twrp.img
with a recent twrp that can run android 10 from here and then power + vol up without switching slots.
garylawwd said:
When you boot to twrp make sure to flash stock boot.img of the firmware which you are currently running and then flash twrp installer.zip flash both of these in twrp and do not reboot between flashes
Click to expand...
Click to collapse
how can i flash a boot.img from twrp? i thought, i can only flash .zips from twrp? Also do i need to take spacial measures to be able to read internal memory in twrp?
//edit: i tried to flash named twrp but it wouldnt boot up into recovery, instead went straight into fastboot. so i flashed boot with stock boot again. no solution in sight.
Just FYI - "no command" is default welcome page of stock recovery. If you see it, you don't have TWRP installed.
_mysiak_ said:
Just FYI - "no command" is default welcome page of stock recovery. If you see it, you don't have TWRP installed.
Click to expand...
Click to collapse
Thank you. Still i would expect twrp to open.
Am i using a/b wrong? When i am on slot a and go into fastboot anf fastboot flash boot twrp.img, then i expect twrp to be installed in a, is that correct? Or is it always installed in the inactive slot and thus i had to switch to slot b before i install twrp to have it on a?
tutankpusch said:
Thank you. Still i would expect twrp to open.
Am i using a/b wrong? When i am on slot a and go into fastboot anf fastboot flash boot twrp.img, then i expect twrp to be installed in a, is that correct? Or is it always installed in the inactive slot and thus i had to switch to slot b before i install twrp to have it on a?
Click to expand...
Click to collapse
No idea with TWRP, never used it on this phone, Magisk is enough for me. But I would follow one of the available guides if you need to have TWRP installed.
_mysiak_ said:
No idea with TWRP, never used it on this phone, Magisk is enough for me. But I would follow one of the available guides if you need to have TWRP installed.
Click to expand...
Click to collapse
Thanks @mysiak_d
I used for example this method with this recovery bc it should work with android 10.
straight into fastboot instead recovery :/

Categories

Resources