this custom rom, i made it for my X96 Air box
- base on X96 stock rom
- latest ATV Google APPs [06-2020]
- hybrid home, easy switch between ATV home and Non ATV Home
- easy direct access ATV app from Non ATV Home
- LiveWallpaper enabled easy Access
- Upgraded Wifi driver from latest OTA update
- clean up by remove all unnecessary app from stock rom
- Home Switcher Support Home from
JesonKung
Launcher3
Xperia
ADW
Lollipop
lawnchair
- replace file explorer
- add setting on TV Launcher
- disable battery status display on launcher widget ( need clear data of launcher app)
- extra icon pack
- and Many other tweaks
- fix broken file management
- remove droidfile
Code:
latest update checksum
//
// File Checksum Integrity Verifier version 2.05.
//
674aa99ffc762f579c38af27e3e2ab6d bullghost-x96air-20210125-signed.zip
for anyone that came from previous version here is the step:
Code:
after flash the update, you just only need to clear /wipe the cache partition.
to install the icon pack, copy the from /vendor/preinstall folder to /sdcard folder
Rom
Download Rom
Hi. Thank you for sharing.
I have been running it for a few hours and I love all the additions of features and the Android TV look (I used Mi Box S before so I prefer this look)
I do have one problem though. On stock firmware, I was able to pass through the audio to my sound bar in kodi (this lets me listen to Dolby Atmos and other surround sound technologies). I tried everything on your rom to make it work but it doesn't seem to work at all.
What worked in stock firmware:
Droid settings - sound - switch it to manual - enable all the options and set DTS to 20%. Go to Kodi, go to Kodi audio settings and enable passthrough, then play a dolby Atmos or DTS file and my soundbar said "Dolby Atmos" or "DTS" whenever I played the respective file.
In your rom:
There are three settings apps. 1 is droid settings from stock firmware, 1 is aosp settings app from stock firmware and 1 is the new settings app with extra features.
I have tried changing the droid settings sound options like on stock firmware but that does not work. I have tried using the new settings apps sound options (tried manual, auto, always allow etc etc) and that does not work either. I'm unable to get passthrough audio.
I always get PCM, even in Atmos/Dolby Digital/DTS files. My sound bar supports all of these codecs, and the box can do passthrough audio as I have already tried it on the stock firmware.
It's possible that it's due to viper4android? But I have disabled the master switch in viper as well.
Sorry for the long post but I was trying to be as detailed as possible. Honestly, apart from this, I have zero issues with your rom. I wanted to use it as a daily driver but this sound output option is a big problem as I watch a lot of 4K movies with Atmos and DTS.
If anyone is considering this rom but don't care about the issue I'm having, go for it. There are no other issues in this rom and is easily a daily driver. Works very well and highly recommended from my end.
Nasty_z said:
Hi. Thank you for sharing.
I have been running it for a few hours and I love all the additions of features and the Android TV look (I used Mi Box S before so I prefer this look)
I do have one problem though. On stock firmware, I was able to pass through the audio to my sound bar in kodi (this lets me listen to Dolby Atmos and other surround sound technologies). I tried everything on your rom to make it work but it doesn't seem to work at all.
What worked in stock firmware:
Droid settings - sound - switch it to manual - enable all the options and set DTS to 20%. Go to Kodi, go to Kodi audio settings and enable passthrough, then play a dolby Atmos or DTS file and my soundbar said "Dolby Atmos" or "DTS" whenever I played the respective file.
In your rom:
There are three settings apps. 1 is droid settings from stock firmware, 1 is aosp settings app from stock firmware and 1 is the new settings app with extra features.
I have tried changing the droid settings sound options like on stock firmware but that does not work. I have tried using the new settings apps sound options (tried manual, auto, always allow etc etc) and that does not work either. I'm unable to get passthrough audio.
I always get PCM, even in Atmos/Dolby Digital/DTS files. My sound bar supports all of these codecs, and the box can do passthrough audio as I have already tried it on the stock firmware.
It's possible that it's due to viper4android? But I have disabled the master switch in viper as well.
Sorry for the long post but I was trying to be as detailed as possible. Honestly, apart from this, I have zero issues with your rom. I wanted to use it as a daily driver but this sound output option is a big problem as I watch a lot of 4K movies with Atmos and DTS.
If anyone is considering this rom but don't care about the issue I'm having, go for it. There are no other issues in this rom and is easily a daily driver. Works very well and highly recommended from my end.
Click to expand...
Click to collapse
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Code:
//
// File Checksum Integrity Verifier version 2.05.
//
c808b36f0fe6b4c68cc869c688d6dbe6 bullghost-x96air-20200630-signed.zip
bullghost said:
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Click to expand...
Click to collapse
I'm downloading this now and will report back.
Something to note: On slimbox ROM, this issue is not there. Slimbox ROM has proper audio passthrough. Maybe that helps in fixing the bug?
bullghost said:
hi @Nasty_z ,
i have apply some change.
but i dont have sound bar , so i cannot test it,
please try this version on repo
Click to expand...
Click to collapse
Hi. It works perfectly on the new version!
I tested Atmos, DTS and Dolby Digital. They all work without any issues. Thanks!
The X96 air TV box has four hardware versions P1, P2, V2/P3 and P4. I have P2 hardware, can I install this ROM on my box?
Is it possible to install TWRP recovery with this rom on x96 air?
hoskic said:
Is it possible to install TWRP recovery with this rom on x96 air?
Click to expand...
Click to collapse
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Nasty_z said:
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Click to expand...
Click to collapse
Thanks, worked smooth, I just made backup through TWRP, I guess i can do restore same way?
hoskic said:
Thanks, worked smooth, I just made backup through TWRP, I guess i can do restore same way?
Click to expand...
Click to collapse
Yes exactly. You can restore it the same way, boot into TWRP and use the restore option.
Tried this rom on my TranSpeed 8K Ultra HD S905X3 box but it doesn't get passed the bootup logo. Had it on that screen for more than 15 mins. Am i missing something?
Blaggah said:
Tried this rom on my TranSpeed 8K Ultra HD S905X3 box but it doesn't get passed the bootup logo. Had it on that screen for more than 15 mins. Am i missing something?
Click to expand...
Click to collapse
I believe this rom is specific to X96Air. I think the vendor is exclusive to this model and that's probably what's causing the issue on your box. I suppose you can try to flash slimbox over on the freaktab forums instead.
Thanks for this, I tried the slimbox rom already and it doesn't boot up all the way. The slimbox works better on my S905X2 box.
Hidden WiFI can not be found
Hidden WiFi does not work properly.
[Solved] Select advanced option,enable hidden wifi
【unsolved】The wifi signal is particularly unstable, as if it is a driver problem
Do we expecting some firmware update in the future or this is final version ? Download link seem to be dead had to find this software on other website
Zakariasz said:
Do we expecting some firmware update in the future or this is final version ? Download link seem to be dead had to find this software on other website
Click to expand...
Click to collapse
Download link is fine. I think OP did not enter the link properly as clicking it does not take you to a webpage.
https://sourceforge.net/projects/bullghostdroidtvos/files/release/
With this link and you should be able to download the ROM.
hello please someone told me how to flash this rom ? i get the x96air P3 last day and i want to change rom to watch netflix in HD ? should i instal TWRP first ? i know how to flash phone and instal twrp and rom ... but its my first time in this android box
Hi i just but a x96 air P4 i will try your rom when i receive this box....
Hello,
1. Is this 32 bit or 64 bit ROM?
2. How to enable navigation and status bar in android 9?
Thank you.
Nasty_z said:
I don't think you can install TWRP on x96 air. But you can use the hinged TWRP to boot into TWRP whenever you want through the stock recovery.
Click to expand...
Click to collapse
Hi, owning this box, we can install TWRP in recovery by flashing with AmlogicFlasherV1.0 and the TWRP.img which is in the archive HERE, beware it will be ROOT before.
Related
What is ParrotMod?
This is a mod to greatly improve the performance of the 2012 Nexus 7, on ANY rooted Android 4.3+ ROM.
It doesn't work on Nougat. I can't fix it, because I don't own this device anymore - I gave it to a friend's little brother.
Feel free to fork it and fix that.
(Got a 2013 Nexus 7? Use this version: http://forum.xda-developers.com/nex...eta-1-parrotmod-improve-2013-nexus-7-t3375928)
Download:
https://parrotgeek.com/dl.php?file=ParrotMod_Universal_2016-08-31.zip
Use this one if the other one doesn't improve the speed: https://parrotgeek.com/dl.php?file=ParrotMod_Universal_2016-10-17.zip
GitHub:
https://github.com/parrotgeek1/ParrotMod_Nexus_7_2012
Feel free to fork/pull request! But always credit me if you make something based on it and tell me in a PM or email.
IMPORTANT NOTE
ParrotMod needs 8MB of free space on the system partition. Don't use huge gapps packages.
ParrotMod requires a recovery that has BusyBox built in. (All versions of TWRP do. CWM does not.)
PLEASE disable IO scheduler/RAM/read ahead tweaks in kernel apps. They override ParrotMod's meticulously optimized settings.
REQUIRES LATEST SUPERSU INSTALLED FIRST https://download.chainfire.eu/supersu-stable
EVEN IF YOUR ROM HAS BUILT IN ROOT LIKE CYANOGENMOD, TURN IT OFF IN SETTINGS, THEN FLASH SUPERSU!!
Does NOT support PHH/MagiskSU, ONLY SUPERSU
If the installer warns you about TRIM on boot being disabled, it's a good idea to schedule TRIM using an app like Trimmer, or just leave your tablet on overnight (on silent) instead of turning it off, so it can automatically trim.
You can tell if ParrotMod is working by checking if the file /sys/block/mmcblk0/queue/read_ahead_kb contains "0", using a root explorer. Do NOT use ROM Toolbox or Root Browser, otherwise you will not be able to see the folders. Use Solid Explorer or FX.
Features:
FLASH MEMORY SPEED INCREASE! up to 4x better performance WITHOUT F2FS OR DYNAMIC FSYNC
Auto trim at boot, but ONLY for Samsung flash storage (it is too slow for Hynix/Kingston)
Uses ext4 but can use data/cache f2fs
Audio stutter and multitasking fix
Miracast enabled (but it freezes on disconnect unless you unplug from the receiver end)
Can set up device without Wi-Fi
Bluetooth 4.0 enabled (BLE/GATT/SMP), CVE vulnerabilities fixed (for 5.x)
More apps open at once (minfree tweak, scheduler tweaks, 64k log buffers, zram optimized)
LCD color fix (no Nvidia smartdimmer/Prism)
Internet optimizations
Can use more storage space before it doesn't let you download things
Survives ROM updates with addon.d
Tethering without carrier checks on 3G Nexus 7
Speed up full disk encryption
GPU optimizations (without OC!) and hardware acceleration properties, decrease GPU RAM usage by 4.4mb per app!
Reverted to dlmalloc for reducing ram usage / ART_USE_HSPACE_COMPACT enabled for better garbage collection [Not on 5.0.x]
Instructions - From unrooted stock 5.1.1
Download the KingRoot apk from here on your tablet, install it, ignore the warnings about the app being unsafe, and tap Root. If it says root failed, try again. It will eventually work.
Install Flashify from the Play Store
Download the latest Universal zip in the download link above on your tablet
Download the SuperSU zip from https://download.chainfire.eu/supersu-stable on your tablet
Open Flashify and install TWRP recovery, the latest version
Open the KingRoot app, tap Menu 3 dots icon, General settings, uninstall KingRoot
Delete the KingRoot and Purify apps
Plug your tablet into a computer! (not even a charger) otherwise it will freeze on the next step. This is a bug in the tablet itself.
Reboot your tablet while holding the power and volume down buttons. If this does not work power on while holding BOTH volume UP and DOWN.
Scroll with volume buttons to Recovery mode and tap power button
You will see a Google screen and then TeamWin logo, just wait
Tap Never show this screen again and Swipe to allow modification
Tap Install
You will see the files on your internal storage, go to Download folder
Tap on ParrotMod_XXXXXXX.zip
Tap add more zips
You will see the files on your internal storage, go to Download folder
Tap on UPDATE-SuperSU-v2.XX.zip
Swipe to confirm flash
When it finishes installing tap Reboot System
Your tablet will reboot
Wait 30 seconds for the device to settle
Enjoy the improved speed! (You can delete ParrotMod_XXXXXXX.zip now)
Extras
Fix for speaker/headphone buzzing while charging: https://parrotgeek.com/dl.php?file=ParrotMod_ChargingNoiseFix.zip
Upgrade notes
It is safe to flash new ParrotMod versions without wiping data.
IF YOU UPGRADE MAJOR ANDROID VERSIONS YOU MUST WIPE SYSTEM, FLASH THE WHOLE ROM, AND REINSTALL PARROTMOD.
UPGRADING ROM BUILDS WORKS FINE! In ROMs with addon.d support, it will even keep ParrotMod installed.
Please don't use with ParrotMod:
L Speed/any other "supercharger" like tweaks. I will ignore any support requests if you use them. Most are very badly programmed/full of placebos.
Disable journaling zip (it conflicts with my script, and doesn't improve performance)
Don't limit background processes, it might even make the tablet SLOWER. As of version 2016-04-30, the installer script removes this setting from build.prop automatically.
Known Bugs
Doesn't work on most Nougat ROMs
Miracast will freeze the tablet on disconnection unless you disconnect from the TV/dongle side. This is a common Tegra issue.
The optimizations to the ART runtime do not work when Xposed is installed, and you will see reduced performance! They also don't work on 4.4.x or 5.0.x.
Recommended Kernel:
https://forum.xda-developers.com/nexus-7/development/kernel-dc-kernel-t3310642
Slow charging hardware fix:
https://forum.xda-developers.com/showthread.php?p=65039448
Credit
Busybox from BSZAospLp ROM LMY49H
libc/libart from i9300 CM14/i9300 CM13/i9300 JustArchi CM12.1 old beta
Charging Noise Fix is based on an apk from the Moto G 2015 stock ROM.
Bluetooth 4.0 libs for 4.3 from https://github.com/manuelnaranjo/AndroidBluetoothLowEnergyEnabler/tree/master/releases
BT4.0 KitKat libs from cm-11-20160509-UNOFFICIAL-grouper by @dookie23
BT4.0 5.x libs from Dreams - version 5.3.9.4 for Maguro
BT4.0 6.x libs from aosp_grouper-ota-eng-20160803.ds.zip by @AndDiSa
BT4.0 7.x libs from cm-14.0-20160924-UNOFFICIAL-i9300.zip by @Taker18
Thanks
Thanks to bangsergio on XDA for testing several dozen beta versions.
Thanks to @nereis for showing me a zram tweak.
How ParrotMod Works
ParrotMod works by trying to counteract the slow flash storage speed, by decreasing unnecessary reads and writes, and also optimizing how well processes share the bandwidth.
To optimize RAM, it also changes minfree values, replaces libart and libc with optimized versions (reverting to the memory allocator that was in 4.4.4), and enables zram (but in a less CPU intensive compression mode).
It also enables GPU clock scaling instead of throttling based on CPU speed, to improve performance in GPU-bound games. It also disables Nvidia PRISM adaptive backlight to fix washed out screen in videos.
It increases the CPU priority of audio players, and the hd-audio0 kernel thread, to fix sound stutter when multitasking.
Finally, it increases wifi transmit power and noise filter in nvram.txt to increase wifi range.
I also made my own patch to enable Miracast.
Looks nice :3 Sounds like a very good ROM for newbies, I'd be happy if you'd do the same ROM with the 3.4 kernel when it comes out and CM13/Android 6.0 AOSP.
KawaiiAurora said:
Looks nice :3 Sounds like a very good ROM for newbies, I'd be happy if you'd do the same ROM with the 3.4 kernel when it comes out and CM13/Android 6.0 AOSP.
Click to expand...
Click to collapse
Maybe if I have beta testers. The Nexus 7 is now in the hands of its (much happier) original owner. Almost all of the mods in this zip except /system/lib and mira4u apk should work M though. Also probably tilapia if you remove the assert in updater script which I will do soon
To make it even simpler for newbies, why not use Wugfresh to root from stock 5.1.1? It's so much easier than your method.
http://www.wugfresh.com/nrt/
Is this a rom or a simple mod to install over stock lollipop, because the downloadable zip only has 13mb?
sroma1980 said:
Is this a rom or a simple mod to install over stock lollipop, because the downloadable zip only has 13mb?
Click to expand...
Click to collapse
It's a mod because my internet is too bad to upload the whole rom. Uploading this takes 7 min
cdnron said:
To make it even simpler for newbies, why not use Wugfresh to root from stock 5.1.1? It's so much easier than your method.
http://www.wugfresh.com/nrt/
Click to expand...
Click to collapse
Doesn't that erase data?
[This post was for a test feature which has been merged into the mod]
well this is my personal experience with this rom
coming from virgin unrooted, locked bootloader, never been into the darkside with my given by best friend nexus 7 (2012 and 16gb)
always OTA updated until 5.1.1
can't stand with lag and everythings else.
a litte bit google and found this thread.
so i factory reset my nexus
download parrot rom (saved in download folder)
download kingroot (saved in download folder too)
install es file manager from playstore, browse to download folder, install kingroot
running kingroot
download super SU
install flashify from play store
running flashify and choose recovery, choose TWRP, download and flash TWRP. after finish press back button
uninstall kingroot and purify
reboot into recovery (power off first. power on while holding BOTH volume UP and DOWN) until boot screen appear. -in firstpost say just power and vol down, well is not working for me. i have to hold both volume keys.
in TWRP recovery backup my current rom (just in case no body knows whatt would happend in the future)
after that select install
select parrot
add super SU
and waitt........
viola everything running smooth as butter. no more delay.
will stay in this rom for now.
just hoping may be in the future just add playstore. so we can download everything else we need and no redundancy.
thank you for your effort making this rom
Ice Zodiac said:
just hoping may be in the future just add playstore. so we can download everything else we need and no redundancy.
Click to expand...
Click to collapse
what? do you mean delete more preloaded google apps? If so, I'm maybe thinking about replacing Play Music with Eleven or Shuttle, and add motorola camera and gallery instead of google photos, and CM12.1 browser & also viper4android
Ice Zodiac said:
thank you for your effort making this rom
Click to expand...
Click to collapse
you're welcome
parrotgeek1 said:
what? do you mean delete more preloaded google apps? If so, I'm maybe thinking about replacing Play Music with Eleven or Shuttle, and add motorola camera and gallery instead of google photos, and CM12.1 browser & also viper4android
Click to expand...
Click to collapse
yes real AOSP with nothing accept play service and play store so if i want play music, i download play music or else i can download power amp. i can cownload google camera or maybe just camera 360.
BTW the slow charging still not fix on my nexus. over night charging only from 18% until 80% (more than 10 hours)
thank you for your effort. i will try to do wipe (factory reset) maybe will comeout differently)
Added to INDEX
This mod has been added to this [INDEX] thread:
[INDEX] Nexus 7 2012 - ROMs, Kernels, MODs, GUIDES [27/01/16]
Ice Zodiac said:
BTW the slow charging still not fix on my nexus. over night charging only from 18% until 80% (more than 10 hours)
thank you for your effort. i will try to do wipe (factory reset) maybe will comeout differently)
Click to expand...
Click to collapse
i couldn't fix it either, it happens to me too
parrotgeek1 said:
i couldn't fix it either, it happens to me too
Click to expand...
Click to collapse
Try to rapitly insert and erase the charger few times. That works for me.
Just a question, it is a mod I can use with any rom ?
I am on Orion rom.
thanks.
Marcovanbasten said:
Just a question, it is a mod I can use with any rom ?
I am on Orion rom.
thanks.
Click to expand...
Click to collapse
Yes, if you open the zip and delete the contents of /system/priv-app and /system/app. Also delete any thing in the updater script that has delete(...) or delete_recursive, and the line in the patch prop.sh that has lmy47v in it. Then rezip
if you use it on marshmallow it will bootloop unless you delete libstagefright_wfd and libMira4U. But then miracast won't work
If your rom has stagefright fixed delete libstagefright_EVERYTHING-BUT-wfd.so and libutils and libcutils
I'm going to make a universal version later, sorry
EDIT: you have to flash SuperSU even if your rom includes built in su
Ice Zodiac said:
yes real AOSP with nothing accept play service and play store so if i want play music, i download play music or else i can download power amp. i can cownload google camera or maybe just camera 360.
BTW the slow charging still not fix on my nexus. over night charging only from 18% until 80% (more than 10 hours)
thank you for your effort. i will try to do wipe (factory reset) maybe will comeout differently)
Click to expand...
Click to collapse
parrotgeek1 said:
i couldn't fix it either, it happens to me too
Click to expand...
Click to collapse
Oajj said:
Try to rapitly insert and erase the charger few times. That works for me.
Click to expand...
Click to collapse
Sorry for OT. I know this issue and I know how to resolve it. It's a problem with the flat cable of the micro USB port. With a little tear down you can resolve the problem. Take off the back cover, screw the speakers and USB board, detach flat cable and put a piece of transparent tape above it in order to make more pressure on pins. Reassemble all the components and take a look if the problem still here
Interesting.
Cam I flash this over my already rooted device from or will I need to start from scratch again.
Sent from my Nexus 7 using Tapatalk
deejayburnout said:
Interesting.
Cam I flash this over my already rooted device from or will I need to start from scratch again.
Sent from my Nexus 7 using Tapatalk
Click to expand...
Click to collapse
You can flash it if you're on rooted stock lmy47v
can i flash this on
this 5.1.1 rom?
http://forum.xda-developers.com/showthread.php?t=2931064
Re: [ROM][F2FS/EXT4][AOSP][BSZAospLp v1.9.5][5.1.1_r30 LMY48Z][SuperSU|BusyBox][16/1/7]
Sent from my Nexus 7 using Tapatalk 2
deleted
deleted
Hey guys,
Check out this new Mod for Samsung galaxy on5
https://forum.xda-developers.com/android/development/mod-splash-screen-samsung-galaxy-on5-t3625967
What variants of the on5 will this work on? I have the g550t1 and have been looking for a stable Rom as this is my daily driver.
does the camera work?
Well, just for the record, I installed it on the 550T1 and the camera does not work, nor does the sound. If you can live without those, it's probably a decent ROM.
Serious problem
After flashing this rom, whenever I lower brightness to zero screen become black and then I have to factory reset my phone every time.
So please help me out.
Apparently not quite ready for daily driver status, lol
is there any way to flash the rom via odin??
bassem763 said:
Hey guys, I am back here with galaxy knight v3
Dow
Vid to help out:
Instructions:
01)dowlaoad v3 from link above
02)paste it in your extsdcard
03)poweroff your device
04)boot into recovery mode
05)backup your system, efs, boot & modem partitions to extsdcard
06)wipe davik/art cache, system, data, internal storage, cache
07)go to install
08)locate zip file
09)swipe to install
10)config aroma installer
11)nxt to reboot
12)done
13)enjoy gknight v3...
Features (full grace ux port )
1)Dream & Grace ui mix look
2)N7 launcher
3)N7 weather
4)N7 widget
5)new systemui
6)prerooted with magisk
7)aroma installer
8)black boot animation
9)new boot logo
10)new theam store
11)new ui tones & ringtones
12)debloted
13)partially deodexed
14)N7 smart manager
15)svoice with wakeup command
16)new fonts
17)xposed (need to install apk seprately)
18)google assistant
19)init.d support
20)hades kernal
21)new cool walpapers
22)popup ui video player
23)N7 photo editor
24)N7 Gallery
25)N7 in callui
26)N7 Dialer
27)N7 contacts
28) android N emojis
29)multiwindow
30)volte
31)call recording
32)popupui
33)scroll capture
34)latest apps
35)latest game tuner
36)game launcher
37)game tools
38)csc tweakes
39)build.prop tweakes
40)stock camera
41)smusic
42)samsung mail
43)N7 my files
44)snotes
45)s8 calculator
46)N7 clock
47)edge screen
48)smart alert
49)easy mute
Developers:
Click to expand...
Click to collapse
i am not able to flash the rom properly ...
after installation gets successful on restarting phone my phone screen gets blank after on5 name screen ....
then no further response...
can anyone provide me a solution or please tell me if there is any chance of flashing the rom via odin
I flashed the ROM as instructed. Although it took several minutes to get past the Samsung splash screen, it booted up to a very attractive UI. The camera and sound, however, do not work at all. You are aware the smartphones are supposed to have these features, no?
Are we missing something? Is there something else I should download?
Camera, Mic and Audio Error
I am unable to use any of the three.
How big is the file?
It seems all custom roms on any variant of the On5 are incapable of loudspeaker, mic, or camera control. Or in the least, until a future update. Instead of adding new features, why not make what we have work and develop from the ground up? Assistant is pointless if the mic refuses to work.
Im trying to log into snapchat on this rom but it doesnt appear to be working. Ive tried useing root cloak with xposed, but that didnt work, but now snapchat still wont work even without xposed. Does this ROM use supersu or something else?
Does anyone have the link?
Just bought the phone. Audio quality is great.
I tried all 3 firmwares available in flymeos site and in 6.1.3 with root capability ran the dumpsys media. audio_flinger command in terminal while playing a 24/96 file and from output I saw that it was downsampled to 48000 hz.
Sadly cannot test the other 2 firmwares because of not root capability. (6.3 and 7) . I think the dac supports direct audio playback of HD files with no downsampling. It is probably a software issue. Any comments or solution maybe.?
Edit 22/8 tried the dumpsys command again with terminal emulator with flyme 7 after rooting and it seems all hd files are still downsampling to 48000 hz
Edit 9/9 (flyme 7 rooted)tried the 3 players usb audio player pro ,poweramp, neutron . With usb audio player pro and poweramp i used the hires drivers and hires output playing 24/96 files and the dumpsys command shows that they get downsampled to 16/44 the same with neutron that doesnt has a hires menu in our phone.
The good news is that when we play 16/44 they dont get 16/48 like in other phones but they are played as they are.
Edit 13-12 i finally make direct hd playback without downsampling to happen .i edited my audio policy configuration xml (system/etc)and entered some values you can see them below in the attachement (added 88200 96000 and 192000 in the lines that are related to 32bit audio and headphone.) I tried it with usb audio player pro and poweramp and it works . Also ran the dumpsys command to be sure
There are some bugs during playback but after reboot of the phone all works. with uapp i play for example 24/96 file and then play a 24/44 sound is not heard through headphones although the player seems it is playing the song.After reboot of the phone it is fixed again. The solution i found is to close the player everyu time i want to play a song with different rate from the one before that.
kutulu32 said:
Just bought the phone. Audio quality is great.
I tried all 3 firmwares available in flymeos site and in 6.1.3 with root capability ran the dumpsys media. audio_flinger command in terminal while playing a 24/96 file and from output I saw that it was downsampled to 48000 hz.
Sadly cannot test the other 2 firmwares because of not root capability. (6.3 and 7) . I think the dac supports direct audio playback of HD files with no downsampling. It is probably a software issue. Any comments or solution maybe.?
Click to expand...
Click to collapse
[I'm sorry I'm not answering on the subject]
What variant of the phone you got? I have M792H that came with Global firmware.
You say that 6.1.3 still has root. I really need root function but I'm not sure if I can safely downgrade from Flyme 7.0.0.0G to 6.1.3.2G. Do you think it's possible?
cris2d2 said:
[I'm sorry I'm not answering on the subject]
What variant of the phone you got? I have M792H that came with Global firmware.
You say that 6.1.3 still has root. I really need root function but I'm not sure if I can safely downgrade from Flyme 7.0.0.0G to 6.1.3.2G. Do you think it's possible?
Click to expand...
Click to collapse
Yes no issue did it a lot ot of times ! Just clear data make a clean install. Put the update.zip(6.1.3) in main folder and turn off the phone. Power on +up and tick both
kutulu32 said:
Yes no issue did it a lot ot of times ! Just clear data make a clean install. Put the update.zip(6.1.3) in main folder and turn off the phone. Power on +up and tick both
Click to expand...
Click to collapse
Thanks, I'll give it a try after I backup my data. Do you have Global or Chinese phone/firmware?
cris2d2 said:
Thanks, I'll give it a try after I backup my data. Do you have Global or Chinese phone/firmware?
Click to expand...
Click to collapse
Global version M792H
kutulu32 said:
Global version M792H
Click to expand...
Click to collapse
I did it! thanks again
I have just one more question, if you are so kind: with what app do you manage Root access? SuperSU seems not to be working. Have you been able to use Flashfire app? I haven't, because it requires SuperSU or Magisk.
cris2d2 said:
I have just one more question, if you are so kind: with what app do you manage Root access? SuperSU seems not to be working. Have you been able to use Flashfire app? I haven't, because it requires SuperSU or Magisk.
Click to expand...
Click to collapse
I have the phone 2 days only and I haven't experimented withvsupersu yet. I used the internal root of the phone while at 6.1.3. Have you tried supersu 2.79? Make a backup first because of the fear of bootloop. And have the update.zip in main directory lol.
kutulu32 said:
I have the phone 2 days only and I haven't experimented withvsupersu yet. I used the internal root of the phone while at 6.1.3. Have you tried supersu 2.79? Make a backup first because of the fear of bootloop. And have the update.zip in main directory lol.
Click to expand...
Click to collapse
Yes, I've tried an older SuperSU, but system went into bootloop.
I'm thinking if Beta ROMs are worth it?! Maybe they have extra features than Stable Global... I found the latest Beta, 7.8.6.5, but I'm not sure if it can be installed from Recovery, like other Global Stable ROMs. I hope my Meizu won't turn into a Nokia (brick)
cris2d2 said:
Yes, I've tried an older SuperSU, but system went into bootloop.
I'm thinking if Beta ROMs are worth it?! Maybe they have extra features than Stable Global... I found the latest Beta, 7.8.6.5, but I'm not sure if it can be installed from Recovery, like other Global Stable ROMs. I hope my Meizu won't turn into a Nokia (brick)
Click to expand...
Click to collapse
If it is your main phone dont experiment too much lol . I bought this phone just to replace my mx4 pro that i only used for audio playback . Lets wait for beta global versions . I am back at 7.0 flyme because i find that phone behaves better than 6.1.3 . Absense of root is an issue though.
kutulu32 said:
If it is your main phone dont experiment too much lol . I bought this phone just to replace my mx4 pro that i only used for audio playback . Lets wait for beta global versions . I am back at 7.0 flyme because i find that phone behaves better than 6.1.3 . Absense of root is an issue though.
Click to expand...
Click to collapse
It's my main phone so I guess I'll be gentle with it. But, as far as I searched on google, there is a Beta Global ROM for Pro 7 = 7.8.5.30G. I don't know if it's really working or not on Pro 7 Global...
I too returned to 7.0.0.0G and I miss root mainly for AdAway app.
It's my first Meizu and I just discovered that Flyme has internal Backup function that backs up app data also, not only apks, so backup apps like Titanium Backup become obsolete (even without root and TB, apps cand be easily uninstalled or frozen with proper ADB commands).
cris2d2 said:
It's my main phone so I guess I'll be gentle with it. But, as far as I searched on google, there is a Beta Global ROM for Pro 7 = 7.8.5.30G. I don't know if it's really working or not on Pro 7 Global...
I too returned to 7.0.0.0G and I miss root mainly for AdAway app.
It's my first Meizu and I just discovered that Flyme has internal Backup function that backs up app data also, not only apks, so backup apps like Titanium Backup become obsolete (even without root and TB, apps cand be easily uninstalled or frozen with proper ADB commands).
Click to expand...
Click to collapse
Thanks for the link I shall try it and I l tell you my findings
Tried to install it but after 2-3 percent phone rebooted back to 7.0 stable maybe checks imei or something or was a closed beta.
kutulu32 said:
Tried to install it but after 2-3 percent phone rebooted back to 7.0 stable maybe checks imei or something or was a closed beta.
Click to expand...
Click to collapse
Too bad
kutulu32 said:
If it is your main phone dont experiment too much lol . I bought this phone just to replace my mx4 pro that i only used for audio playback . Lets wait for beta global versions . I am back at 7.0 flyme because i find that phone behaves better than 6.1.3 . Absense of root is an issue though.
Click to expand...
Click to collapse
good news ! Guide works ok . We dont need to downgrade because of root access lol
http://forum.flymeos.com/thread-46186-1-1.html
kutulu32 said:
Yes no issue did it a lot ot of times ! Just clear data make a clean install. Put the update.zip(6.1.3) in main folder and turn off the phone. Power on +up and tick both
Click to expand...
Click to collapse
Have you tried installing A version over Global phone? I have Pro 7 global India. unable to flash A version (firmware error).
aashutoshrc said:
Have you tried installing A version over Global phone? I have Pro 7 global India. unable to flash A version (firmware error).
Click to expand...
Click to collapse
No I have version 7 global installed rooted
Edit Anybody rooted succesfully with 7.1 version ?
What are the results of dumpsys media.audio_flinger command when playing a hires file?
edit tried and installed 7.1 a chinese rom and again hires is downsampled to 16 bit.
Disclaimer: I am not responsible for anything bad that may occur with your device, but I will take all the credit you can give me if it works for you!
Finally, I would like to present first custom ROM for our device (Teclast T8)! It was ported by me from ASUS ZenPad 3S 10 Z500M and this firmware has lots of great features! It was tested for about a month before release, because I didn't want to share beta ROM with a lot of bugs/issues.
This version is only for flashing via TWRP! (it can be found here https://forum.xda-developers.com/android/help/twrp-root-custom-recovery-teclast-t8-t3892647)
Version Information
Status: stable (suits for everyday usage)
Created: 08.01.2019
Updated: 25.06.2020
Android version: kernel 3.18.35, android 7.0 Nougat
What's done/features
Added ROOT (Magisk)
No bugs with battery statistics (like it was on stock ROM)
Unique ASUS design and customization (icons, themes, etc)
New useful functions (split screen, quick launch apps on lockscreen, etc)
Advanced power/battery control tools
04.03.2020 - fixed issues with sound
25.06.2020 - fixed offline charge
Bugs
Double tap to awake function
Gestures on lockscreen
All other functions work great! (fingerprint, camera, etc)
Installation
Download firmware to internal storage
Reboot into TWRP
Do this wipes in Wipe section: system, cache, dalvik,data
Reboot recovery: go to reboot section -> choose Reboot recovery
Go to install section and choose .zip package
After installation completed just reboot device and enjoy
If you face error "failed to mount system" or something like this after installation completed - don't mind it and reboot
Screenshots
P.S After device is booted you can choose any language on system setup. I used MIUI icon pack here.
Download
The link is here - https://mega.nz/file/WxYTDSiI#tFXlrqjv3z9qgXI1aZoUM8NdTP99PvKI5eXJSmIeLEQ
If you would like to support further development - https://www.paypal.me/teclastT8development
Brilliant! Thank you Sword900 - GREAT JOB!
Thanks to the developer for this ROM and TWRP. It's a good device let down by lack of software support and removes all the Chinese native apps which I could not remove even with Titanium backup.
I was running TOS 2.0.1 but with a magisk patched boot image which I flashed a long time ago. This makes it simpler.
There are some issues with the TWRP but atleast I can update Magisk without having to patch the boot image and flash it every time.
The zip file in OP, the folder names have a comma after the number as pointed out earlier. Remove that before attempting any operations or you will face weird and wonderful behaviour.
Works like a charm !
I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$)
zenacute said:
I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$)
Click to expand...
Click to collapse
I too... any solutions?
zenacute said:
I have problem with the sound. When i turn on the volume and play ssomething, i will hear annoying sound (ezzzzzz,,*%$)
Click to expand...
Click to collapse
saddys said:
I too... any solutions?
Click to expand...
Click to collapse
Seems like I finally fixed it. You should install new version with all wipes listed, download link was updated. Let me know if you find any other issues.
How did you make this?
I'm trying to do the same with other Teclast tablets.(With P80X)
I would appreciate it if you could tell me.
(I used Google Translate)
few__ said:
How did you make this?
I'm trying to do the same with other Teclast tablets.(With P80X)
I would appreciate it if you could tell me.
(I used Google Translate)
Click to expand...
Click to collapse
I've just ported this ROM from another device with alike parameters (chipset, android os version, etc). There are lots of guides on the net which will help u. Another way is to find or make it manually kernel-source for your device, so u could compile firmwares on your own. But it requires appropriative knowledges in android development. Also u may take a closer look at GSI project as if your stock firmware is based on android 9.0.
I'm not responsible for any damage to your device of any sort.
By flashing this you take responsibility of anything that happens.
Process at your own risk!
If you want to check firmware - please make backup. Better to store all partitions, at least efs and may be modem.
Instructions
1. Install custom recovery - use my twrp
2. Download the zip(s) - firmware and Magisk (optional)
3. Backup all partitions (it least efs) and store somewhere - it need to do - because you can loose imei
4. Full wipe all
5. Flash firmware and Magisk
Information
This is native tablet port with normal keyboard, animations and other stuff.
My port based on:
framework and apps: T510XXU1ASCE and T515XXU1ASCK (new Tab A 10.1 SM-T510\515) Android 9.0 with 2019-03-01 security patch
libs and etc: A600NKSU1ZSB6 (SM-M105F) Android 9.0 with 2019-02-01 security patch
kernel: based on M105FDDU1ASB2 (SM-M105F) Android 9.0 3.18.91
Additional
1. Added OC for CPU (1690MHz - Kernel Adiutor, EX Kernel Manager) and GPU (default 1001, in OC 1146MHz - EX Kernel Manager)
2. Added themes from A600N
3. new wlan driver driver 4.0.10.206A_20181017 (from A600FNXXU3BSC5)
Links
LTE version:
1. 20190523: https://drive.google.com/file/d/1tK1F92bTWaaOBqUbkyVL8j3Sw50B0kre/view?usp=sharing
WiFi version:
1. 20190523: https://drive.google.com/file/d/1v2OM_IL8SCq5rLxOG1Vy21syd2KTq-Zd/view?usp=sharing
Magisk
Before run Magisk installer in TWRP - you need run small script - https://drive.google.com/file/d/1ZnnKHtDAl0ioHjQXiNO6wErZN8odsO0P/view?usp=sharing
It's simply unmount /cache partition and then mount it as /vendor. After run the script, you can install Magisk. If Magisk Manager does not appear in the list of apps - extract magisk.apk from Magisk installer and manually install it.
Sources
Kernel: https://github.com/Valera1978/android_kernel_samsung_exynos7870
Thanks
Thanks to Samsung
good morning Valera! I've been waiting for this a lot, since Samsung Pie is very good rom, I've already downloaded and flashed it. I just had time to try the basics and everything seems to work and the Ui is nice. Then I will make a good revision. Thank you very much for your great works!
@Valera1978 First of all, thanks for the great Pie port. Tab feels brand new, smooth. One thing I have found is the Themes/Wallpapers don't work. It will download wallpapers but when you go to apply, all you see is a black square, and nothing is applied. If it is an animated one for lock screen, it fc's the systemui when you try. Not a big deal as I can always apply wallpapers from my own collection. This is only issue so far and I have a feeling there won't be many more if any. Thanks for your works!!!
great job from shortcomings is at present a problem with the keyboard
I like this rom, it seems clean and pretty and I would like to be able to install magisk but I do not understand how to do it, could you explain it ?. Thank you
Bootloop
I tried this on my T580 coming from RR latest Pie ROM. Backed up ROM, factory reset wipe and installed just the wifi port. Wiped dalvic and rebooted. Bootloops at first Samsung screen. What did I do wrong?
edit: Never mind. Used Advanced Wipe for everything but Internal and SD. Booting now.
Great rom. Thanks for your effort.
Looks good thank you.
Are there other people who get a failed when they try to sign in the Samsung account?
In the pie_t510_t580_port there are the follwing settings that don't work or crashes, or don't belong in the wifi version and if it's possible should be removed.
T-roaming
Service provider
Mobile networks
Also in the About tablet there is some LTE version information
There is also the mobile hotspot settign in the connections
Cellphone signal icon in the at the top next to the wifi signal
These are for when you have the LTE version
Great work man!!! Thanks for your work!!
Anyone managed to download other languages keyboards in samsung keyboard because swiftkey lags
chris333333 said:
Anyone managed to download other languages keyboards in samsung keyboard because swiftkey lags
Click to expand...
Click to collapse
When I try to download other languages I get the message download failed. Probably a bug.
I hope you can port this rom for P585Y. Thank you
Tung Lam said:
I hope you can port this rom for P585Y. Thank you
Click to expand...
Click to collapse
I imagine that if you were to give the dev a P585, he might have a reason to port and a device to test it on. Otherwise, he has neither. I've seen this request many times, where someone with a different device, asks a dev to support theirs, and it never succeeds.
My personal hotspot isn't working after my first reboot... though I've uninstalled every 3rd party app.
Edit: It comes after installing Magisk.
EDIT 2: I've tried to reboot without installing any apps twice, and the problem appears, I only need hotspot for hosting an offline game with friends, like Bombsquad.
Is it debloated?
jurgenmmehja said:
Is it debloated?
Click to expand...
Click to collapse
Sort of...
This ROM needs more focus though, it's faster than the stock Oreo, but has weird bugs...
To solve that keyboard bug switch to the phone interface through build.prop editor,
Edit the line: ro.build.characteristics=tablet to phone instead of tablet.
Then add the languages you want then revert back the changes after finishing.
About that hotspot bug, I don't know, but can't we just use the stock kernel and wifi instead? What's the use of the new one?
About the Secure Folder, there's a way to set it up by modifying the kernel, and we never had it on our own device, we only got it on S7.
But there's a small question... do we have a chance to get a Samsung 64-bit ROM on our device? Because the Play Store will shut down on 32-bit devices in August 2021, though this device is 64-bit.
Is it really much faster than stock 8.1? None of the roms I've tried so far have been, the ui lags and battery takes a hit I assume as it's running harder to keep up
Bingley said:
Is it really much faster than stock 8.1? None of the roms I've tried so far have been, the ui lags and battery takes a hit I assume as it's running harder to keep up
Click to expand...
Click to collapse
That's because it's overclocked, and it generally feels way smoother like the stock Nougat ROM, there are some annoying bugs though, some camera apps can't access the camera, and the Hotspot doesn't work after installing some apps and rebooting, looks like it's not Magisk to blame, that doesn't happen in the stock though.
So I'm waiting until the OP replies or gives us an update hopefully.
I've tried the hotspot in the A600N port and it works properly! Why not here in this port? I think due to the presence of numerous Korean carrier options and maybe the Wi-Fi Sharing, when it's enabled, the hotspot doesn't work, even if disabled and rebooted. So you should remove these options, I guess?
I use SwiftKey beta as a side keyboard, testing the puppets, they are working in the stock ROM, but in both Pie ports, though I've allowed camera permission, the app can't load puppets, and that is not just present in SwiftKey, it is present also in some apps, it may be a missing Pie support, hopefully.
And thankfully, there are no camera modes, just front and back camera,
When I switch modes in this port, it force closes immediately,
and the Photo editor works properly in the A600N port, but not in this port, when I switch the filter it gives me a black screen instead
The only thing that annoys me is that the tablet interface of the A600N is not as great as this port, landscape mode is better here, because this port has tablet framework.
So, I wish this port gets more attention than it deserves, thank you Valera1978 for your great contributions! Hope you focus on this port, well more than you do with LineageOS!
Work on P580 ??