Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Same problem here.
Same. Anyway solution so far?
vernel1008 said:
Hi,
I installed the 9.14 firmware as instructed on a previous thread.
The uploading of the res and fw file completed in the amazfit bip. However the amazfit reboot and its not opening since.
12hrs already passed and still its not turning on.
What I noticed is that the bluetooth signal can be detected by other phones. Then I can connect via Ble Scanner but it will disconnect.
Is there a way to force flash the firmware?
Thank you.
Click to expand...
Click to collapse
Only one idea: Delete Gadgetbride, restart your Phone, install Mi Fit-App, Switch your Phone language to english (If isn't) and try to install Firmware again.
HTH
I had the same problem, i was desperate and ready to throw it away, but i finally did what urs1956 said and it worked!! (Only thing is that i paired it with an other device at first).
i am the same probleme but juste uptdate firmware with mi fit... and black screen... bricked...
Nothing work.
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
jrebillard said:
Hello,
I have the same issue (black screen) after installed a firmware french, the watch started to upload the new chinise version 1.0.80 when I appaired again the watch with mifit and instead restart : black screen.....
I see the watch in bluetooth but I can't appair it again !!!
Some ideas?
Click to expand...
Click to collapse
Me. too
sleep in black screen.
My conversation with Amazfit/Huasmi
Molly (Amazfit)
Feb 10, 00:47 PST
Hello,
Thank you for contacting Amazfit.
We are very sorry that you have trouble with your device.
Have you ever flashed the ROM of your watch?
Can you please send us a screenshot of your watch screen?
If the screen turned off, please charge it to have a try.
If it doesn't work, please remove the device from the charger, put it on the table, make it untouched for 24-48 hours to let the battery drains and then charge it to see if it solves the issue.
If your issue persists, please get touch with the seller to return the device to have it examined.
Thank you for your understanding!
Sincerely,
Molly | Amazfit Support
Feb 9, 16:19 PST
Amazfit BIP bricked after firmware update: Hi,
I did a firmware update which apparently failed as since then the watch will show a black screen only.
The watch is discoverable in the android bluetooth settings, however, I cannot pair or connect to it.
Is there any way of "forcing" an update via bluetooth?
Kind regards
That same answer from support.
wait for battery drains and then charge it << Not resolve this problem.
I'm wait sinc Last month until now. It's sleeping.
https://amazfitwatchfaces.com/cor/
any news?
Hello,
i have a bricked Amazfit BIP so i decided to open it up.
I saw there is a Winbond 25Q64FWIQ flash onboard, so i'm wondering if anyone has a flash dump to try to reflash mine with a chip programmer
Hello,
I have amazfit GTR and recently I've bought Huawei P40 pro.When I've installed amazfit app on it,paired the watch I saw that there is graphic issue on the watch after synching.
Do you know how to solve this issue?
Did somebody have this problem?
Maybe installing the last or new firmware does help?
How to do it? I've made factory resset on the clock maybe 3 times and reinstalled the amazfit app 2-3 times and nothing changed.
Spellbound_91 said:
How to do it? I've made factory resset on the clock maybe 3 times and reinstalled the amazfit app 2-3 times and nothing changed.
Click to expand...
Click to collapse
Hello, i don't have a Huawei, so i do not understand why you have this problem.
Updating is maybe possible via the Amazfit app, i thought there was an option somewhere in the app.
But if not, then i am sorry and cannot help you.
Hey everybody,
i have similar issue with the GTR 47 mm - suddenly the watch failing to update fonts and in constant loop of "check for updates in app" and "failed to update font library". so i can't use it anymore. Tried to update the firmware (including base resources, rescources and GPS) with fonts and fonts only - with "notify fitness app" - but getting the same result. the only thing that i can manage to perform with watch is to unpair, then reset to factory and pair again with amazfit app. Tried all kinds of firmware and fonts versions.
Can someone please guide me what to do? is it possible to solve this issue at all? Or my watch is already bricked?
Thank you for help
Hi all,
I've just got new Amazfit Stratos 3, paired them with the phone and didn't do anything else. When trying to go into the Settings-General, getting the "Unfortunetly, Settings has stopped".
Tried to update Firmware, but when checking on the phone or on the watch it says that it is uptodate: 4.2.0.1.
So how can I fix the Settings error and how can I update from 4.2.0.1?
I have the same problem
i think they're going to push a new firmware because 4.2.6.0 is no more available since this WE.
you can manually push the 4.2.5.0 (last stable) to your watch for the post: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
winni21 said:
i think they're going to push a new firmware because 4.2.6.0 is no more available since this WE.
you can manually push the 4.2.5.0 (last stable) to your watch for the post: https://forum.xda-developers.com/smartwatch/amazfit/fw-tool-stock-global-international-t4031153
Click to expand...
Click to collapse
really I must be an IT engineer to do it? is not easy, unlock the watch and push a new firmware.
is not possible other option like the "update firmware" button?
PlataoPlomo said:
really I must be an IT engineer to do it? is not easy, unlock the watch and push a new firmware.
is not possible other option like the "update firmware" button?
Click to expand...
Click to collapse
No need to unlock bootloader to upgrade just copy the OTA file to your watch then run the command to launch the update.
karabel said:
Hi all,
I've just got new Amazfit Stratos 3, paired them with the phone and didn't do anything else. When trying to go into the Settings-General, getting the "Unfortunetly, Settings has stopped".
Tried to update Firmware, but when checking on the phone or on the watch it says that it is uptodate: 4.2.0.1.
So how can I fix the Settings error and how can I update from 4.2.0.1?
Click to expand...
Click to collapse
Check this: https://forum.xda-developers.com/showpost.php?p=82908781&postcount=82
Hi, same problem like @karabel, received today my Stratos 3, no french language??, and the problem with the General menu, tried to go into and got the "Unfortunately, Settings has stopped".
I have updated the firmware 4.2.0.1 to 4.2..6.0 and all been fine . Now General is accessible and all languages are available.
Thank you a lot @Saratoga79 for your support!! I like all you do for these smartwatches!
Ps: Could add in the download folder file Stratos3 a stock_firmware_adb_root_init.d_supersu for this watch as you have done for the PACE ? Many Many thanks!
Hello all!!
I had the same problem, I bought an Stratos 3 with two days ago with Firmware version 4.2.0.1. with no Spanish Language. I have tried to update to a newest version following the instructions said @Saratoga79, but now my watch isn't working. It shows all the time in the screen 'FastBoot' an some Chinese words... I am really desperate, I think I have broken the clock ...
Anyone can help??
Sidnarref said:
Hello all!!
I had the same problem, I bought an Stratos 3 with two days ago with Firmware version 4.2.0.1. with no Spanish Language. I have tried to update to a newest version following the instructions said @Saratoga79, but now my watch isn't working. It shows all the time in the screen 'FastBoot' an some Chinese words... I am really desperate, I think I have broken the clock ...
Anyone can help??
Click to expand...
Click to collapse
What did you exactly use to update?
Help me!!
gtr 47 please open the app, and select "check for updates" on the watch device page to continue update.
boymac said:
Help me!!
gtr 47 please open the app, and select "check for updates" on the watch device page to continue update.
Click to expand...
Click to collapse
Hello friend, it seems it corrupted the firmware update,
No need to panic, please explain what you where trying to do?
You tried to rollback the firmware with other app, like notify & fitness ,
or you tried to update the watch through official Mi Fit?
In any case, what files did it installed succesfully, the Firmware, the res, the font or the Gps?
And what version of the fw where you trying to update?
Rizla46
Rizla46 said:
Hello friend, it seems it corrupted the firmware update,
No need to panic, please explain what you where trying to do?
You tried to rollback the firmware with other app, like notify & fitness ,
or you tried to update the watch through official Mi Fit?
In any case, what files did it installed succesfully, the Firmware, the res, the font or the Gps?
And what version of the fw where you trying to update?
Rizla46
Click to expand...
Click to collapse
hi, i have the same problem and i only have problems updating the fonts. can you help?
rubio0203 said:
hi, i have the same problem and i only have problems updating the fonts. can you help?
Click to expand...
Click to collapse
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware (1.3.6.06): Updated
Basic Resources (V14): Not updated
Resources (V58): No updated
Fonts (V11): Not updated
GPS: Updated
Latest Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
j77moduss said:
Hello I have the same issue, I think the watch did an OTA update however
It cannot get fonts to install!.
I have:
firmware: 1.3.6.06
Ltates Zeep from Google Play
Is there a way of going back to the previous firmware release?
Thanks
Click to expand...
Click to collapse
Hello again, Yes, you can download Notify & Fitness for Amazfit(Green Logo), You Download from here (XDA Developers) a previous version to downgrade, and when you complete, you run again Zepp oficcial, for update.
If the downgrade can't complete, select to update from notify, and choose stock firmware!
in many cases can't update correct to the latest firmware.
Also If you have mi fit in the phone, uninstall it, because the devise gets confused with both (Zepp and Mi Fit) and if you have the magiacal unicorn Zepp Edition, you should have the online update setting on.
Rizla46 said:
Hello again, Yes, you can download Notify & Fitness for Amazfit(Green Logo), You Download from here (XDA Developers) a previous version to downgrade, and when you complete, you run again Zepp oficcial, for update.
If the downgrade can't complete, select to update from notify, and choose stock firmware!
in many cases can't update correct to the latest firmware.
Also If you have mi fit in the phone, uninstall it, because the devise gets confused with both (Zepp and Mi Fit) and if you have the magiacal unicorn Zepp Edition, you should have the online update setting on.
Click to expand...
Click to collapse
Hello I tried to down grade unsuccessfully using Notify and Fitness but it fails trying to update Fonts!. It is the same error that I get in Zepp oficial.
Any other suggestions?
Thanks
j77moduss said:
Hello I tried to down grade unsuccessfully using Notify and Fitness but it fails trying to update Fonts!. It is the same error that I get in Zepp oficial.
Any other suggestions?
Thanks
Click to expand...
Click to collapse
I had the same problem in 2 cases, but with notiffy and after some tries, it managed to downgrade the fw file, and when I connected in zepp it updated the fonts succesfully.
But it took over 3-4 times in each case through notify.
Hello, could you let me know the version you used to downgrade and where I can download it.
Thanks
j77moduss said:
Hello, could you let me know the version you used to downgrade and where I can download it.
Thanks
Click to expand...
Click to collapse
the one that suggested notify as stock.
Rizla46 said:
Hello friend, Do you have mi fit also installed in your device?
Also, what version of zepp have you installed? All in One, or Official?
Click to expand...
Click to collapse
I don't have mifit, I had zepp aex 5.4.0 and the watch on version 1.3.7.17. Trust when I tell you I have try everything. Downgrade all version, install all app version since the watch came out, and nothing woks. I use notify and fitness to do does downgrades and always fail at fonts, I had some luck getting the phone to work, but I went crazy and did the update to the Last version and then again the problem with the fonts. Open to suggestions
well, i guess its the end, after the new update 1.3.7.17 i cant dowgrade to any version. always fail, im trying to downgrade to 1.3.4.14.
News, I managed to get the watch in to home screen and use it with all functions. The problem, I can barely see the screen, it's a glitch I think, I can unly do this with the charger connected and sending two notifications to the watch and pressing the power button. I can use the watch and do everything but when I disconnect the charger or leave it for a time back to "please open the app and select check for updates". Trying to do something new I'll be posting soon.
rubio0203 said:
News, I managed to get the watch in to home screen and use it with all functions. The problem, I can barely see the screen, it's a glitch I think, I can unly do this with the charger connected and sending two notifications to the watch and pressing the power button. I can use the watch and do everything but when I disconnect the charger or leave it for a time back to "please open the app and select check for updates". Trying to do something new I'll be posting soon.
Click to expand...
Click to collapse
As you describe it, there are many issues to the device, there is a chance to be a faulty device.
Contact huami if you are still in guarantee.
for the one case I rolled back the firmware, the problem was that it didn't updated the fonts correctly, and the screen was going on and of instantly, but when I managed to rollback, and update the new firmware successfully , the problem was corrected.
Also when you go for official last update (if you rollback) choose official Zepp, Not AEX or Magical unicorn's.
And Don't disconnect the device from app or bluetooth, while the hole procedure (All files) are updated.
Also you can download a previous official version of zepp, and it will update automatically the firmware that was distributed on the specific version of zepp
Rizla46 said:
As you describe it, there are many issues to the device, there is a chance to be a faulty device.
Contact huami if you are still in guarantee.
for the one case I rolled back the firmware, the problem was that it didn't updated the fonts correctly, and the screen was going on and of instantly, but when I managed to rollback, and update the new firmware successfully , the problem was corrected.
Also when you go for official last update (if you rollback) choose official Zepp, Not AEX or Magical unicorn's.
And Don't disconnect the device from app or bluetooth, while the hole procedure (All files) are updated.
Also you can download a previous official version of zepp, and it will update automatically the firmware that was distributed on the specific version of zepp
Click to expand...
Click to collapse
thaks for the reply. i have this in mind, i can downgrade to any version with notify and fitness, maeby if i go to the version when the problem happens i can manage to update the firmware. ill give it a try.
Can we stop the Zepp app from auto updating? When I last opened the app it instantly triggered my watch update without warning me. The worsts part was that my battery was low near 10% which is very risky.
My condition is worse than yours...
I'm also stuck on the same screen as in the picture you sent & I can not install anything.
If I try to update anything or even upload a design background to the watch, I get an error message and the watch restarts. :crying:
AlonHagai said:
My condition is worse than yours...
I'm also stuck on the same screen as in the picture you sent & I can not install anything.
If I try to update anything or even upload a design background to the watch, I get an error message and the watch restarts. :crying:
Click to expand...
Click to collapse
you managed to solve the problem?