I have been at this issue since Saturday and gone through a lot of possible solutions but to no avail. So first of all i am in Ghana. A friend came to me with his s6 edge that he had some issues with his phone going off when he unplugs the charger and getting stuck in a bootloop when turning it on unless he plugs a charger in before it boots up fully(even with full charge)
So first of all he wanted to do a factory reset(phone was not rooted). Factory reset completed successfully but issue still persisted.
Specs of the phone was:
android 5.0.2
model number = SM-G925F
original csc (i wasnt able to note that down because downloading stock firmware was going to be the last ultimate weapon. first i was going to try some custom roms to see if it fixed the issue. Besides it was working fine here in Ghana.)
So that's when i flashed a twrp and i dont exactly remember but i think i might have tried to flash a lineage OS or something. But long story short, when u try booting up, the samsung galaxy edge screen with powered by android came on and stayed there. and it did not go on to boot up.
After trying through the night i then decided to use the ultimate tool and flash a stock firmware. Try as i might none of them got past the "Repartition Operation Failed" portion of flashing it. The Pit File was becoming an issue. Tried firmwares for my country, countries nearer to us, contries in africa and finally even european firmwares. And since from reading from here and other forums that the F variant was an international version the international pit files should work but they werent.
All this while whenever i go to Odin Download mode on the phone, the product name there was SM-G925D. This started the confusion because at that point i had looked through alot of firmware and that was not an option. When i searched google for that, the search results mostly correlated it to SC-04G, which looking at it was a Japanese firmware. I didnt want to use a japanese Firmware for obvious reasons. At least i wanted a firmware that was by default in English. But after about 2 days and seeing a lot of answers saying stuff about going to settings and checking stuff there plus me wanting to see an interface and work my way from there i succumbed.
And lo and behold, it flashed on the first try(i used the 4-part files firmware. It was android 7.0). But when it came to booting up, the splash screen had changed from samsung bla bla bla powered by android to NTT DOCOMO powered by android. But it booted up and i skipped through the setup. i had to change the language to english but there were a lot of japanese bloatware that came with it. But as i expected when i popped a sim card into it, and restarted the phone, there was the not available symbol(circle with a bar across) where the network bars were supposed to be.
Seeing that this was not going to do, i went to the settings this time to check on any important details and this were the new details
android version 7.0(January, 2018)
model number=SC-04G
build number was now SC0.....(cant write the full code as im currently in odin mode)
But obviously it was the japanese network. After this i have downloaded more firmwares and they all fail at "Setting PIT...Re-Partition failed". Somtimes i try to mix the 4 files up using maybe the CSC portion of the Japanese firmware but BL, CP, and AP of firmware from my region. This time the error is "sboot.bin failed".
And that has been my grind till now. Downloading likely firmwares and all failing to doing extremes like the mix and match. When the mix and match with BL, CP, and CSC of Japanese with AP of my region works and eventually boots up, there is no touch input. The touch does not work. When that happens i just have to start all over with the SC-04G, which never fails to work.
I have even seen some things about changing csc files in the file explorer with root so i flashed the Japanese FW and rooted it. Went through the processes but to no avail.
PS:
The first part of the Odin screen where you choose to continue or reboot is now completely in Japanese whiles it was formerly in English.
And there is no indication on the phone itself that it was from Japan. The back says Samsung and below it says Galaxy s6 edge. Friend bought it from a shop in Ghana here brand new.(not from a carrier)
****So here lies my confusion. How come a phone with an original model number of SM-G925F have a Product name of SM-G925D in Odin and hence only Flash Japanese Firmware SC-04G(CSC code = DCM) but would not flash any of the international variants. Even if i can eventually get the Japanese firmware to read the sim card we can manage it that way. But thats for when there are no options left.
So please i would like to know your ideas as to how this is happening and any possible solutions that might be different from what my batallion of open tabs are telling me. You can also let me know if you want any more details i might not have included. Looking forward to hearing from you guys.
Update On Issue
I ended up using the japanese firmware in the end because it wasnt picking anything else.
This time after the setup process, it picked up the sim card and the imei is available. So since network is now available i just rooted it with cf autoroot and removed the japanese bloatware and everything looks normal now.
Except the original issue of going off randomly whn power cable is pulled out even when having full charge.
:good:
Related
Dear all,
I am trying to flash my GT-i9300 from stock Hong Kong firmware to stock Chinese Firmware because Hong Kong version has traditional chinese input whereas I need simplified Chinese Input which may be available in Chinese version. When I bought the mobile in China, it already had Chinese firmware but I installed Cyanogenmod and other things but now I want to revert back. The problem is every firmware I tried works when I flash using Odin 3 except the CHU firmware. While flashing as soon as the process comes to Modem, Odin displays Fail and I have no option but to flash back to other firmware which installs without a problem. Any clues why the phone doesn't accept CHU firmware? I have tried all the four firmwares available on Sammobile website for CHU (China) but non of them installs (all fails at the Modem step). I also downloaded from other sites but the same problem. By the way, my mobile is not Chinese, it was made for the European market, I am not sure but I think it was Croatia or something, dont recognize the language on the packaging.
Another tiny problem: My mobile doesn't responds smoothly when it is plugged for charging, the touch seems not to work. I have to touch an icon two or three times to open it. Don't know why.
Thanks all.
Could it maybe have something to do with different network used in China? I mean doesn't the Chinese networks use different technology from Europe? That would maybe explain the European version not accepting Chinese modem?
Dear Juahan,
May be... I think I should give it a try but installing a few firmwares from around the world and let you know. However, when I bought this mobile, it was European model having a chinese firmware, I think they shop sellers in China had already installed a chinese firmware on it, so how come they could do it while I can't. Well to be honest I don't exactly remember the firmware which came installed but I know that it had Simplified Chinese, which is used not available in Hong Kong version. Anyhow, I have to get certain so I will try some new firmwares on it. May be you are right. Thanks any way.
Have you tried Kies initialization procedure? It should help you to determine your phone's factory firmware and even flash it if you wish.
Don't remember exactly location of this option in menu (don't have my laptop turned on now) but it was something about initialization and restoring in Kies menu. All you need is to enter your phone's serial number (located under battery or in setting menu) and model number (GT-i9300). Kies will check those data in Samsung database and ask what to do next, flash or not.
I don't know why but, sadly, it sometimes doesn't work with some models.
Problems with touchscreen while charging is due to unstable power source or faulty AC charger. Try charging with USB port in your computer and check if problem persists.
i9.0.1.3k galaxy imperator
Hi all!
I bought an S6 Edge second hand and after flashing a stock ROM, I had the "emergency only" calls issue, I tried everything I could find in the forums to no avail and I ended up taking it to a repair service. I did not think they could fix it but they did and I would like to know what they did to it in order to prevent it from happening again and to know if I can leave it as default (not custom OS) so that it can upgrade.
State of phone when bought:
So, the phone was working well with all carriers (from Colombia). The only thing I was able to notice after I bought it was that it was still on Marshmallow (6.0.1) with carrier branded stuff. It was in perfect shape otherwise.
So I downloaded a stock ROM and installed it using Odin. After this the phone would not let me make calls as it was not registering on the network. It did not even let me make emergency calls despite getting full bars of signal and being able to recognise the list of carriers when attempting to manually connect to them.
Important: The ROM downloaded was for the right version of the phone which was the G925i and the IMEI, serial number and baseband were not altered from the original. Also, I checked the phone to see if it was reported as lost/stolen and it was not (of this I'm sure because in Colombia you can consult a centralised database on any carrier's webpage). Also.. Here in Colombia it is illegal for carriers to lock phones.
Steps I took to fix it:
Downloaded ROMs for all carriers, branded and unbranded, I even installed one from Trinidad and Tobago and a LATAM one.
I performed all the tricks to disable and enable flight mode, location services, try con connect manually to the networks, changing to GSM only, GMS/CDMA, international roaming, etc.
I also extracted modem.bin from an earlier version and flashed the modem.bin with Odin (6.0.1 moden on 7.0, 5.1.1 moden on 6.0.1 and 5.1.1 moden on 7.0). All modems flashed correctly and the issue remained exactly the same.
So I finally gave up.. I installed the latest stock ROM which was an unbranded Nougat (7.0) version and took it to a repair service and they fixed it in a couple hours.
What I noticed after the phone was "repaired":
- The phone was rooted, SuperSu was installed, no other root app was installed.
- On SuperSu, there are entries for ADB shell (they all say Superuser command contents have not been logged for this entry) in a two minute timespan.
- The android version was downgraded to 6.0.1, I was told not to try to update it.
- Developer options was enabled with USB debugging turned on.
- The boot option (the one where you can wipe data and cache partition) was left as original (not the TWRP one).
- The ROM used to downgrade was the same I had before but only downgraded the version.
I suspect this same procedure was performed before on the phone but it had the original ROM carrier branded so it seems as if they installed a custom ROM, rooted it, connected with pc and performed some command line stuff to fix it, then cleaned the bootloader to a stock one.
The questions:
Any ideas what did the repairman do to fix the phone? Also, would it be safe to make a full backup with TWRP and flash again a stock ROM upgraded to 7.0 and then flash the backed up modem to get it working? Or would that possibly screw up the repair?
Thank you all in advance for any help. I'm sure there are lots of people out there experiencing the same "emergency only" issue I had but there does not seem to be a fix around, but clearly there is one! So I hope this sheds some light into what could possibly happen.
I purchased a 2nd hand Galaxy S7 Edge from someone on Facebook Marketplace. It's a dual sim model (which is not directly available in South Africa) - When I collected the phone the old owner manually removed apps which I found to be strange as I was planning on doing a factory reset anyways, but he said I first had to update the phone before I can do a reset. Once I got back home and put the phone of WIFI > Software update I got a message saying that the software was not verified (leaning towards the phone being rooted). I also saw that he had multiple copies of Whatsapp which I knew was not possible with a normal ROM.
Not wanting to constantly see his personal info, I decided to reinstall the base S7 Edge software I found sammobile.com - Using odin this worked and I was able to reset the phone, but now there is no network coverage at all. I have tried everything, even downloaded a different version (both XDA and XDE) but no luck. I took it to a cellphone shop and they say they think the moterhboard is faulty which I doubt, when I got the phone and put in my simcard the first time around there was no network issue at all, this only started once I reinstalled the original rom from Samsung.
My understanding now is that the phone was likely purchased in UAE or Dubai and the network was unlocked (not sure how this works) - When I reinstalled the default samsung rom the network lock is back and I can now not use the mobile device with my local provider.
What options do I have? Is there another rom (even if it's not samsung, happy with anything) I can use on the device? I presume they had a different rom installed anyways to get it working in the first place, but I was stupid and never made a backup of the rom so now the phone is nothing more than a wifi device.
Any assistane would greatly be appreciated!
Hi all.
This is my first post and will try and make it really quick.
I recently got a Galaxy Note 5 (because their just amazing) It came with Android 6.0.1 installed and the "Software Update" section of the settings menu does nothing. I mean literally nothing. I tap "About Device" then "Software Update" and nothing happens no new screen loads or anything.
so I was looking for the OEM ROM's and this is where I ran into so much confusion. The current details the phone gives me is.
Galaxy Note 5 SM-N920F (There are no F rom's)
Build Number MMB29K.N920FTMB4DPH2
Bootloader N920TUVS6ERH1
Which lead me to believe even though their is no "F" variant, That its a T-Mobile model (No Rom's really give 100% functionality to these except the standard 7.1 from T-Mobile)
So I went to Sammobile.com to download the latest official firmware released, But the the CSC numbers don't match my device. they are all starting N920TT***** and mine starts N920FT*****. However the PDA numbers match my bootloader. So will any Note 5 T-Mobile ROM work even if the CSC numbers are different? as long as the PDA numbers are the same?
I get more confusing info from Samsung as well. The "Samsung Members" app shows my Model number as : SM-N920TZKATMB (Which again has no "F" in it, The sticker on the back of the device with the IMEI even states it as SM-N920F)
Am I making this weirdly complicated for myself? Will the US T-Mobile ROM's for android 7.1 work find I flash them with this device? (I live in the UK and the device has 100% compatibility with my network)
Also will flashing the stock 7.1 US ROM from T-Mobile re-lock the SIM ? I'm pretty sure it doesn't/Cant relock SIM to T-Mobile only, But nothings better than a professional confirming.
There is also another issue. according to "Root Checker" I have a Rooted device. But their is no Super User apps on it at all (Cant seem to even find Binaries for SuperSU when using Root File Manager), Pokémon GO fails to load which I have read could be because of the "Root Check" throwing up a positive. But no other apps fail to work at all. their all perfect even banking never even so much as an error. it is just Pokémon GO. Or has someone previously messed up rooting so it looks like it is but the files are missing and isn't really? I tried using Magisk Manager but it did nothing and I don't get any prompts for Root access when installing apps.
So Please Help Me! Thank You.
I bought a s9+ from swappa around February. I bought my mom one from the same supplier a week ago. At first I was concerned that her's had ATT logo until I realized it would change once a tmobile sim was put in. Her's is now SW ver Tmb/Tmb/Tmb. Then I noticed she is at Android 10.0 UI ver 2.0. I am stuck at Android 9 UI ver 1.0
So It seems I was worried about the wrong phone. It is MY phone that can't get updates. My baseband is:
G965USQU7CSK6 which I believe is an ATT baseband. my SW ver is Tmb/Tmb/Att
I tried connecting to smart switch and it says I am up to date. I tried putting in an at&t sim card (that no longer is in service) and smart switch doesn't complain about anything but it still says it is up to date. Doing OTA while using At&t sim card also says I am up to date. I am CLEARLY not up to date. My last update says Nov.1, 2019.
I have used Odin before...mostly for rooting phone. I haven't rooted since the s5 ( where I could take the battery out ). Little paranoid to use Odin considering I can't take the battery out, but with good instructions I will proceed.
Any help on how to update and especially update on tmobile network would be extremely appreciated.
btw I'm in the US and my model is SM-G965U
-Craig
--UPDATE
I have researched a bit and found that it IS possible to change the firmware over to Tmobile using a patched version of Odin.
I downloaded from
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
the 3.13.3_3B_PatcheD.zip
I downloaded G965USQS7CSK3_G965UOYN7CSK3_TMB.zip
from sammobile, which is for Android 9
I would love to be able to use HOME_CSC but that may not work. I could really use some hand holding going through this process.
Is this the correct firmware? Should I be using Android 10 firmware if that is ultimately what I want? HOME_CSC or no? I notice they have the 10 version:
PDA G965USQS7DTB1
CSC G965UOYN7DTB1
as well, which is Android 10 for Tmobile. Also, knox ? will this trip the knox counter thing-a-ma-jig?
Thanks
SOLVED
cw9002 said:
I bought a s9+ from swappa around February. I bought my mom one from the same supplier a week ago. At first I was concerned that her's had ATT logo until I realized it would change once a tmobile sim was put in. Her's is now SW ver Tmb/Tmb/Tmb. Then I noticed she is at Android 10.0 UI ver 2.0. I am stuck at Android 9 UI ver 1.0
So It seems I was worried about the wrong phone. It is MY phone that can't get updates. My baseband is:
G965USQU7CSK6 which I believe is an ATT baseband. my SW ver is Tmb/Tmb/Att
I tried connecting to smart switch and it says I am up to date. I tried putting in an at&t sim card (that no longer is in service) and smart switch doesn't complain about anything but it still says it is up to date. Doing OTA while using At&t sim card also says I am up to date. I am CLEARLY not up to date. My last update says Nov.1, 2019.
I have used Odin before...mostly for rooting phone. I haven't rooted since the s5 ( where I could take the battery out ). Little paranoid to use Odin considering I can't take the battery out, but with good instructions I will proceed.
Any help on how to update and especially update on tmobile network would be extremely appreciated.
btw I'm in the US and my model is SM-G965U
-Craig
--UPDATE
I have researched a bit and found that it IS possible to change the firmware over to Tmobile using a patched version of Odin.
I downloaded from
https://forum.xda-developers.com/android/software/patched-odin-3-13-1-t3762572
the 3.13.3_3B_PatcheD.zip
I downloaded G965USQS7CSK3_G965UOYN7CSK3_TMB.zip
from sammobile, which is for Android 9
I would love to be able to use HOME_CSC but that may not work. I could really use some hand holding going through this process.
Is this the correct firmware? Should I be using Android 10 firmware if that is ultimately what I want? HOME_CSC or no? I notice they have the 10 version:
PDA G965USQS7DTB1
CSC G965UOYN7DTB1
as well, which is Android 10 for Tmobile. Also, knox ? will this trip the knox counter thing-a-ma-jig?
Thanks
Click to expand...
Click to collapse
ok, so I bit the bullet and decided to go ahead. I used
odin 3.14.1_3B_PatcheD.zip just to be sure
I made sure my phone was unlocked: yes it changes carriers if I put in different sim. When in Tmobile sim Settings->Connections->Mobile Networks->Network operators , yes it has a search networks button and it eventually comes up with other carriers so....safe to say I had unlocked phone ( but not samsung unlocked ie. SM-G965U not SM-G965U1)
I used the latest android 9 firmware. and I used HOME_CSC ( even though I did a backup with smart switch b4) Everything went smoothly, and I still have my apps and now I can get an ota security patch for it. Will write back once I am up to Android 10. oh, btw I am still at SW ver Tmb/Tmb/Att , but I've got ota updates so I don't care
cw9002 said:
ok, so I bit the bullet and decided to go ahead. I used
odin 3.14.1_3B_PatcheD.zip just to be sure
I made sure my phone was unlocked: yes it changes carriers if I put in different sim. When in Tmobile sim Settings->Connections->Mobile Networks->Network operators , yes it has a search networks button and it eventually comes up with other carriers so....safe to say I had unlocked phone ( but not samsung unlocked ie. SM-G965U not SM-G965U1)
I used the latest android 9 firmware. and I used HOME_CSC ( even though I did a backup with smart switch b4) Everything went smoothly, and I still have my apps and now I can get an ota security patch for it. Will write back once I am up to Android 10. oh, btw I am still at SW ver Tmb/Tmb/Att , but I've got ota updates so I don't care
Click to expand...
Click to collapse
I am now at the same baseband version as my mom. Everything worked perfectly. I suggest you go with the least change possible to get to the point that you are able to do OTA updates. For me this was going to the latest Android 9 that they had at sammobile since I was on Android 9 and going with the Tmobile version. I hear the carrier doesn't even matter these days, but I decided I wanted to make sure it was Tmobile compatible so I chose the Tmobile version from sammobile. Happy trails to you in your endeavors. Hopefully you can learn something from mine.
Hey, I really want to thank you for this! I had the same issue and was exploring similar solutions. After several days of researching alternate plans, I was about to give it up as too risky until I found your post - by googling for hints: "SW ver. TMB/TMB/ATT"! You helped me take the dive, and I'm now happily past having a second-hand S9 (sm-g960u) that wouldn't do an OTA update. After a flawless flash, my first OTA request got me to Android 10, (UI 2). now I have a follow-up update scheduled for the wee hours. (And, yes, I'm still at "TMB/TMB/ATT".)
Perhaps like you, I started by investigating the possibility of flashing the UNLOCKED ("U1") firmware. After learning it was possible with the _patchedD Odin, it still scared me enough that I decided on a more conservative approach and followed your exact advice. I especially appreciated your plan to flash NOT the latest update, but the last Android 9 TMB update. That turned out to correspond to the ATT version on my phone, making TMobile either unable or unwilling to offer an OTA update.
History: This is my third used S9. While all were sold as UNLOCKED, only the first had the "U1" model suffix (SM-g960u1). When the second one booted up as a TMobile phone, I felt tricked - but also lucky that I got the right carrier. That's when I learned about the difference in model numbers. As you noted the U1 firmware is factory unlocked - attached to no carrier. When my third phone booted up with a Verizon greeting I figured I could be facing trouble - even though it accepted my TMB sim card.
The seller explained to me that my phone was part of a batch of ATT phones, all "SIM unlocked" using a Verizon sim card. I think sellers of phones with claims to be unlocked should be required to specify whether FACTORY or SIM unlocked.
Hope this great contribution of yours will continue to help others.