I was trying to flash lg-k350n with LineageOs and make a whole bunch of idiotic deeds, so currently I'm felling like dying is the best option for me.
1. I've used this tutorial: .getdroidtips.com/install-custom-rom-using-twrp-recovery. It clearly says that this ROM is for Android 8.0 Oreo, while mine is Android 6.0 Marshmallow. Nevertheless I've downloaded ROM lineage-15.0-20170913-Unofficial-MT6735-64-bit.zip. For some reason TWRP mentioned here getdroidtips.com/lineage-os-15-lg-k8-8-0-oreo/ did not wok for me but I've googled a bit and found something called TWRP-recovery-for-LG-K8.img which worked (not by fastboot flash TWRP-recovery-for-LG-K8.img since this TWRP appeared to be to big but simply by fastboot boot TWRP-recovery-for-LG-K8.img).
So I just did:i
turn on debugger
turn off oem lock
adb boot bootloader
fastboot boot TWRP-recovery-for-LG-K8.img
Feeling happy that TWRP loaded nicely I had not done any backjup and just wiped system as suggested here: lineageos.org/devices/h990/install. Then I've tried to installl the Android 8..0. ROM with obviously did not work. And I've got left with a TWRP working and then I've put the last needle in my coffin - I've rebooted hoping that some hard reset or recovery will fix things for me.
So now I have a phone which I'm able to put to recovery, but it does not recover anything. The phone just go dead after such a recovery.
I cannot put it into fastboot mode, if I could, I would just run 'fastboot boot TWRP-recovery-for-LG-K8.img' and at least had a chance to google a bit for maybe a vanilla ROM or anything working, which I could've later installer.
I've seen that there is a way to put the phone into download mode when it will download stuff from S/W "LG Bridge", bu I don't have Windows and haven't yet tried in virtualbox.
Is there any way to unbrick the device? Please help an idiot!
Sorry, you have to find a Windows box I'm afraid, LG is only offering Windows software for flashing. But chances are quite good that you are able to revive the telephone that way. I have bricked my phone as well but was able to unbrick it this way:
Go to www.lg.com, choose your language, select download, software and firmware.
Select smartphone, Android smartphones, K-series and your model number. This is only to come to the download site of LG Bridge, I guess it's not really important to choose the precise model!
Download LG Bridge, install and start it.
Let it update itself and the USB drivers and keep the software running.
Switch off the phone, press Volume up and keep holding that button.
Connect the phone with via USB with the PC while still pressing Volume Up. The phone should be recognized by the PC (install USB driver) and by LG Bridge (watch the status line to the left, it should show the phone type and USB)
The phone should automatically switch on and show a download screen (yippee!)
Select the second tab "software update" and then click on "correct update error" in the lower right. It should automatically download the correct firmware from the internet, so this is rather fool proof!
Click through it and this should start the flashing process, at the end the phone will automatically reboot, ask for the PIN, etc.
Unbricked!!!
Above instruction worked for me on a completely demolished phone. Lineage OS, changed FS, root attempted, I almost though that's it, but no, it recovered, thumbs up.
I haven't tried in Virtual Box, so I cannot tell if this is working. But you've got nothing to loose, right, so why not try it?
xor512 said:
I was trying to flash lg-k350n with LineageOs and make a whole bunch of idiotic deeds, so currently I'm felling like dying is the best option for me.
1. I've used this tutorial: .getdroidtips.com/install-custom-rom-using-twrp-recovery. It clearly says that this ROM is for Android 8.0 Oreo, while mine is Android 6.0 Marshmallow. Nevertheless I've downloaded ROM lineage-15.0-20170913-Unofficial-MT6735-64-bit.zip. For some reason TWRP mentioned here getdroidtips.com/lineage-os-15-lg-k8-8-0-oreo/ did not wok for me but I've googled a bit and found something called TWRP-recovery-for-LG-K8.img which worked (not by fastboot flash TWRP-recovery-for-LG-K8.img since this TWRP appeared to be to big but simply by fastboot boot TWRP-recovery-for-LG-K8.img).
So I just did:i
turn on debugger
turn off oem lock
adb boot bootloader
fastboot boot TWRP-recovery-for-LG-K8.img
Feeling happy that TWRP loaded nicely I had not done any backjup and just wiped system as suggested here: lineageos.org/devices/h990/install. Then I've tried to installl the Android 8..0. ROM with obviously did not work. And I've got left with a TWRP working and then I've put the last needle in my coffin - I've rebooted hoping that some hard reset or recovery will fix things for me.
So now I have a phone which I'm able to put to recovery, but it does not recover anything. The phone just go dead after such a recovery.
I cannot put it into fastboot mode, if I could, I would just run 'fastboot boot TWRP-recovery-for-LG-K8.img' and at least had a chance to google a bit for maybe a vanilla ROM or anything working, which I could've later installer.
I've seen that there is a way to put the phone into download mode when it will download stuff from S/W "LG Bridge", bu I don't have Windows and haven't yet tried in virtualbox.
Is there any way to unbrick the device? Please help an idiot!
Click to expand...
Click to collapse
same here, we are two now.
Don Pedro! said:
Sorry, you have to find a Windows box I'm afraid, LG is only offering Windows software for flashing. But chances are quite good that you are able to revive the telephone that way. I have bricked my phone as well but was able to unbrick it this way:
Go to www.lg.com, choose your language, select download, software and firmware.
Select smartphone, Android smartphones, K-series and your model number. This is only to come to the download site of LG Bridge, I guess it's not really important to choose the precise model!
Download LG Bridge, install and start it.
Let it update itself and the USB drivers and keep the software running.
Switch off the phone, press Volume up and keep holding that button.
Connect the phone with via USB with the PC while still pressing Volume Up. The phone should be recognized by the PC (install USB driver) and by LG Bridge (watch the status line to the left, it should show the phone type and USB)
The phone should automatically switch on and show a download screen (yippee!)
Select the second tab "software update" and then click on "correct update error" in the lower right. It should automatically download the correct firmware from the internet, so this is rather fool proof!
Click through it and this should start the flashing process, at the end the phone will automatically reboot, ask for the PIN, etc.
Unbricked!!!
Above instruction worked for me on a completely demolished phone. Lineage OS, changed FS, root attempted, I almost though that's it, but no, it recovered, thumbs up.
I haven't tried in Virtual Box, so I cannot tell if this is working. But you've got nothing to loose, right, so why not try it?
Click to expand...
Click to collapse
your phone cannot be trusted loooooop, cannot goto download and fastboot mode...
If you don't manage to enter download mode you have probably indeed bricked the phone. If what I've written above doesn't work for you I know of no other way to resurrect it, sorry.
This is because you cannot burn TWRP to the Flash plus there's no tool available to bootstrap an LG phone with a completely naked or corrupted Flash. There must be something like that, because a freshly manufactured phone has by definition a naked Flash.
With Samsung phones you have Odin and with it it is possible to burn a software to a completely dead phone. So it is almost impossible to hard brick it. With LG unfortunately it is different. Plus this phone is somehow crippled, it has only a very, very limited amount of Flash. So I would recommend to not care for this phone anymore, it's not worth it, and instead get a current one with a decent amount of memory.
Related
My phone is not booting up.. What has happened to my cell phone.??
I did not do anything for this to occur It was actually ON. I had not restarted or even shut it down when i used it few mins back.. When i returned to it now it was showing the Boot screen, I had no idea of what to do. Just removed and re-inserted the battery.
Now the Phone gets stuck at this command as below !!
Fastboot mode started
udc_start()
--suspended --
What to do.? Please Help.
http://forum.xda-developers.com/showthread.php?t=1088046
I am using the OpenOptimus Rom 2.202.1 and clockworkmod recovery.
The Mobile was in charging state when this happened. It noticed it was in boot screen so i removed the charger and then removed the battery and restarted.
Now should i reflash usign KDZ or is it possible to revive my system back to normal without reflashing.??
clawsright said:
I am using the OpenOptimus Rom 2.202.1 and clockworkmod recovery.
The Mobile was in charging state when this happened. It noticed it was in boot screen so i removed the charger and then removed the battery and restarted.
Now should i reflash usign KDZ or is it possible to revive my system back to normal without reflashing.??
Click to expand...
Click to collapse
follow the link provided by sweetnsour u will get ur phn back to life
I followed the steps given on that thread
My pc shows new device found ANDROID. Device is not getting detected
But on this step in cmd
fastboot erase recovery
it shows < waiting for device >
i too got such problem.
while holding down back +Vol down connect your phone to pc .It will enter into emergency mode.Then your Computer might detect it.
Can anyone of u help me ???? My phone is still stuck with Fastboot mode
Basically on a windows machine you download kdz updater and uncompress it as it is a zip file.
Download from here.
This is what I did on an xp laptop.
I had to down load the drivers from the official lg site. when here you enter the code that is on the box the phone came in or under the battery.
Chose the your county and laguage from the drop down box at the top right of the dialogue box. Then from the middle you can choose the drivers. For some reason I had to find the files and click on them to install the driver.
Ok once you decompress kdz updater there are three seperate files to work with. 1. windows enabler. 2. msxml.msi 3.KDZ_FW_UPD.exe
You will also need to download the right file to restore with,You can find it with google.
Please check here the The_ERROR thread wich explains it very well:
[ROMS] Original LG Firmware list.
Install msxml now.
Now you have to boot the phone into rescue mode. On Lg Optimus One turn phone off even if it means taking out the battery.
Press power - volume up - back (this button is next to the home button).
Connect to usb now.Computer found new hardware and installed four drivers.
Then open device manager. Left click my computer - properties - device manager. You need to disable the lg modem driver. Left click on it and disable.
Now launch kdz updater. There will be a drop box on left set to 3gspt or similiar. on the right drop box set to diag. The long box just above the info box with a file at the side lets you browse to find restore file. e.g. V10a.00.kdz.
Double click the button below and let it do it's thing. Took 15min. My phone shut down and came up with an error at the last minute. Anyway I rebooted and all was good.
Everything was the way I left it. Just had to re-root.
My only real problem was getting the kdz installer to see the phone.
After installing the drivers restart pc. If it finishes quickly and just before saying finished it says phone not found try removing all phone related drivers including nokia pc suite and the lg suite and remove and reinstall the drivers.
Hope this is of some help to you.
Finally, Recovered my phone by flashing KDZ through Emergency mode.. No other method worked..
clawsright said:
Finally, Recovered my phone by flashing KDZ through Emergency mode.. No other method worked..
Click to expand...
Click to collapse
I told you. Nothing else would work.
royal.tarun said:
My only real problem was getting the kdz installer to see the phone.
Click to expand...
Click to collapse
I had the same worries coz my pc did not detect my device at all..
I was trying to get pass the Fastboot mode.. But in the cmd when i tried to erase and re-install recovery it said waiting for device.. Luckily and finally after many tries i could enter emergency mode. Only then the phone got detected but fastboot didnot work there.. The Only way out was to Do the KDZ flash. I flashed the indian GB V20b and did a hard reset now. Flashed recovery and for now have left it with the stock rom..
I wonder now this problem arises due to custom roms.
---------- Post added at 02:03 PM ---------- Previous post was at 01:59 PM ----------
Is the fastboot mode the so called "Brick-ing" of mobile device.?
clawsright said:
I had the same worries coz my pc did not detect my device at all..
I was trying to get pass the Fastboot mode.. But in the cmd when i tried to erase and re-install recovery it said waiting for device.. Luckily and finally after many tries i could enter emergency mode. Only then the phone got detected but fastboot didnot work there.. The Only way out was to Do the KDZ flash. I flashed the indian GB V20b and did a hard reset now. Flashed recovery and for now have left it with the stock rom..
I wonder now this problem arises due to custom roms.
Is the fastboot mode the so called "Brick-ing" of mobile device.?
Click to expand...
Click to collapse
this problem was cuz didn't perform the steps carefully.
This can called bricking but not fully . As it can be recovered.
Bricking is when your phone is as useless as a brick.
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script to get into fastboot at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
So you solve it! :good:
:/
tawhid111 said:
How to fix partion problem !!!
After countlss hours of messing with the LG P769 This is how i got into S/W mode to work !:laugh:
ASSUMING you know how to install fastboot drivers there are instructions on the forum ...so follow those guide note fastboot drivers work best on windows 7 windows 8 was giving me hard time ...
1.install fastboot drivers
2.run lelus script at the same time hold vol+ button once the script shows the OMAP device close the script and immediately put the battery back in .The LG phone will boot into S/W mode !
Make sure you write down your imei or serial number AND make sure battery is fully charged . then
Now simply use the LG software tool or the KDZ offline flasher look around the forum for how to guides
Thats it
Click to expand...
Click to collapse
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
foreverman said:
Still unable to do it, when I plug the cable holding vol+ it just reboot normally :/
Click to expand...
Click to collapse
Then try enter in lelus fastboot mode, ad then flash x-loader, uloader, boot.img and recovery.img from stock rom for your device type model. Then repeat steps 1 and 2
Where can I find the lelus script?
Sent from my Note II
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Then you need a Technician with a Octopus Box to repair your partition table...
ciccillover said:
Sorry for reviving such an old thread, but oh well...
Your procedure doesn't seem to work with my device. Just to make sure we are using the same driver packages, can you post a link to the fastboot driver you have successfully used?
My L9 is always showing this "partition doesn't exist" error message, no matter what I try. Lelus's script seems to do the job and the phone is detected as a fastboot device, and can even be detected in LG Flash Tool (using a 910K cable), but flashing will stop after a little over 2 minutes, because the phone disconnects. During all of my attempts, the screen stays black.
Any hint?
Click to expand...
Click to collapse
Can you boot into recovery? We now have a custom recovery for locked bootloaders (and CM roms). If you can get into recovery, I would try some adb commands to mount the partitions.
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
ciccillover said:
No, no recovery. Just to make sure that I'm not doing it wrong, what is the key combination to boot to recovery?
I have also tried:
Code:
fastboot boot some_recovery_image.img
It says ok, but the phone just hangs at the black screen and becomes undetectable as a fastboot device, until I pull the battery. So, unless the some_recovery_image.img is unsuitable for my P760 (which may be!), there is something seriously wrong I think.
Or maybe I can try the same command with the custom recovery for bootloader locked phones... Where can I find it?
Click to expand...
Click to collapse
Your EMMC partition is wiped or fried... you really need a JTAG service or a Box like octopus because your L9 is Hard-bricked...
Thanks for your opinion. Yet, I still want to hear from others.
I'm running into more and more problems with the L9 as their me grows.
-Fastboot doesn't work under Windows 8.1 and 10, but under the now obsolete(for me) Windows 7, unlike my other devices, which are fine with Win 10.
-ADB seems to work, but requiring the device to be still able to boot.
-I always boot to recovery from within Android as long as the L9 ain't bricked. After a failed rom install, during which the sd card failed(could no longer write or be formatted afterwards, the last time stamps of files and folders were set during the failed install) I discovered a problem with TWRP(Artas182x's and Edwin's), which may have been present since a long time: Trying to invoke TWRP via keypress will brick the device!
So, if my P760 no longer boots, there's only download mode available, sort of the final line of defense.
-There's sort of a trick if even download mode fails: After a failed attempt unplug phone, force switch-off, if the phone is in brick state. Then switch on, force switch-off again, and only then attempt download mode again. And have patience while holding down the vol button, it might take up to 20 seconds for the phone to switch itself on into download mode. (A single forced powerdown will cause Fastboot NOT to work the next time)
But I'm absolutely clueless about the recovery issue, for now TWRP is semi-working, can only be accessed via Android, as long as the phone is fully working.
W/o Fastboot, I now have flashed stock rom several times and rooted it with Kingo rooter just to be able to run Flashify to install TWRP. If Flashify is the culprit for the TWRP issues, I could need a recommendation for a better working app.
ciccillover said:
Thanks for your opinion. Yet, I still want to hear from others.
Click to expand...
Click to collapse
Tried OMAP flasher ? It needs memory configuration file in order to work with our device
No, I didn't. I have sold the phone for spares.
Inviato dal mio LG-D855 utilizzando Tapatalk
I never needed the OMAP drivers and tools. As they are ancient, they will probably make even more problems with newer Windows versions.
I could by no means invoke Fastboot on this device with Windows 8.1 and 10, Seven worked. So you had to go for Download Mode instead to recover to stock rom, then root with the Kingo tool, then install TWRP via Rashr or Flashify, the most time consuming way to recover from the frequent bricks.
And the LG Flash Tool 2014 always needed several attempts to get the job done. The latest official recovery tool from LG works in D/L Mode, but will always download the rom image anew.
Okay guys, I think my phone has a soft brick (no boot logos), so I'm trying to do some restoration... but I'm not having much success.
So, I found a solution in XDA (/showthread.php?t=825173&page=3) saying that I should plug my phone in without battery, SD nor chip and disable the "LG Modem" on my Device Manager. Afterwards, start KDZ Updater and configure it to CS_EMERGENCY. Then I should install a 2.1 French firmware and as soon as KDZ finishes I'd plug off my phone, plug it back in and start it in DL mode again, this time flashing a file named "OUT.kdz", which gives back the boot logos.
Problem: KDZ Updater hangs as soon as I press "Start". It simply freezes when it's in CS_EMERGENCY. I have no solution to this whatsoever, and I also have another thread with previous problems I ran into (Soft-Bricked LG GT540 Optimus).
These are the best forums I've found for any kind of phone, so I'm positive I'll get the help I need, even if I might need to wait some time. Kudos to the admins and every member for taking part of such a great community!
Ebony Dubois said:
Okay guys, I think my phone has a soft brick (no boot logos), so I'm trying to do some restoration... but I'm not having much success.
So, I found a solution in XDA (/showthread.php?t=825173&page=3) saying that I should plug my phone in without battery, SD nor chip and disable the "LG Modem" on my Device Manager. Afterwards, start KDZ Updater and configure it to CS_EMERGENCY. Then I should install a 2.1 French firmware and as soon as KDZ finishes I'd plug off my phone, plug it back in and start it in DL mode again, this time flashing a file named "OUT.kdz", which gives back the boot logos.
Problem: KDZ Updater hangs as soon as I press "Start". It simply freezes when it's in CS_EMERGENCY. I have no solution to this whatsoever, and I also have another thread with previous problems I ran into (Soft-Bricked LG GT540 Optimus).
These are the best forums I've found for any kind of phone, so I'm positive I'll get the help I need, even if I might need to wait some time. Kudos to the admins and every member for taking part of such a great community!
Click to expand...
Click to collapse
I've fixed all my issues! I'll paste what I said in another thread. Yay for one-full-year struggles!
Just wanted to leave my 2 cents here, I've been trying to do my best since around august 2014, no success. 2 days ago I retried this, and I DID IT! I will tell everyone what I did very shortly:
My problem that I solved: I can boot, device works like a charm. But: no boot logos, no recovery.
My solution for TL;DR: UNINSTALL ALL DRIVERS FROM DEVICE MANAGER 1ST, then reinstall. After that, flash a fastboot ROM and use it to WIPE ALL THE DATA IN YOUR PHONE! THIS was what I needed and was never explained: you had to WIPE the old data in order to get the boot screens back.
IN THIS ORDER (THANK YOU to those people from previous replies, gathering all your info was of great value):
Uninstall all of your phone drivers from your PC!!! This is what made most of my headaches go away, just use Device Manager and uninstall anything from LGE. After that, plug in your device in your USB ports (always BACK ports, not front ports, important). It should detect all drivers and download them.
IF it fails (it generally does with LGE USB Modem), you can go to Device Manager > Unknown Device (the one that wasn't recognized) > Right Click and Update > Choose 2nd option, then choose "choose from a list of local controllers" (or whatever the button says). After that, scroll down to LG Electronics, Inc. and install what didn't install.
I also found these drivers, but I did not test them: http://www.mediafire.com/download/p693hcz6kkouh19/USB_Driver_LG_GT540.zip
Huzzah!
Now you're set to begin:
FIRST thing you wanna do is a factory reset, this is something I'd forgotten with time, don't make the same mistake as I did. You can do it by turning your phone on and pressing Volume +/- & Home & Quick Search buttons all together for 5 seconds (it works, be patient and wait for it, even if you open the camera or any other stuff).
Download this Google SDK Tools (unzip and put the folder in C:\ drive) and this Fastboot drivers for GT540 (unzip and put the files inside the folder in C:\android-sdk).
Skip this next line if you know your ROM has fastboot.
Now, if you don't have a ROM with fastboot, I recommend you use either European Open+Fastboot or V20C Orange France Fastboot ROM.
Click to expand...
Click to collapse
Since you have Fastboot enabled, now all you need to do is turn off your device (all this with its battery on it, no weird things) and hold the Camera button before turning it back on. This should take you either to a black screen, or simply to no display, like me. Either one will work anyways.
Now press the Windows key > Type cmd and open it with Right Click > Run as Administrator.
In it, type all this, command by command (you can paste by right clicking):
cd C:\android-sdk
fastboot -w
fastboot erase boot
fastboot erase system
fastboot -w
fastboot reboot
Click to expand...
Click to collapse
And now it's go time! Do what everyone else says in here: Take out your phone's battery, SD and SIM cards, fire KDZ Updater up as Administrator (If your KDZ freezes, then it's either faulty or you did not install msxml, look for a good KDZ that comes with that file and delete your current one), choose CS_Emergency PhoneMode and:
1-Plug your phone while holding the volume DOWN button (don't worry! My phone didn't show "Download Mode" either, if you hear the Windows "Somethingpluggedin" Bump noise, it's ok).
2-Flash French V20A
3-Unplug your phone once KDZ says "==FINISHED==".
4-Plug it once again, holding the volume DOWN button.
5-Flash out.kdz (remember! it's CS_Emergency).
Click to expand...
Click to collapse
THANK YOU XDA!
Good evening, I have in my hands a smartphone lg p778g does not pass me the logo to light following a simple copy of the folder whatsapp internal memory to the microsd (it was blocked after you copy and to restart it and did not initiate more ... it stays in the LG logo when turned on and there does not pass.
I tried to hard reset with vol (+ or -) buttons + home + power but rather than get out the menu of recovery I get the doll android slept with a triangle exclamation and there is no way to enter the menu that tightening no buttons.
Then I looking for information online found the utility tool flash, did all the steps as marked, I installed the drivers perfectly, the PC detects me the phone without problems, but always in the middle of the update (put the mobile mode s / w upgrade ) 50% program lg cancel the process by saying that there has been an unknown error and try try again by disconnecting and connecting the mobile, but no way, I give retry to to try again and again it hangs at 50% and I jump the error screen again.
I wonder if there is some other program where you can do the hard reset this phone than by the official LG utility, or by microsd.
The operating system used is Windows 7 64-bit, disable the Windows firewall and antivirus and run as administrator utility tool flash lg 2014, but always the same. I also tried running the utility lg mobile support tool directly to you directly seeking the most updated for lg p778g firmware, but it's the same as using the lg flash tool 2014, the 50% of the upgrade stops and gives me the message error.
A greeting and I hope you can help me, I need the phone !!
We'd need someone with a p778g. The problem may be be caused by the special branding of the phone, or an encrypted bootloader. Or the internal flash got completely cleared, partitions and baseband rom, which means a full brick. Otherwise flashing stock in D/L mode should work, even if anything else fails. But this goes mainly for LGs official tool working online. With the LG Flash Tool 2014 i had also problems.
I think both tools have to ways to perform the unbricking. Either with the phone put in D/L mode by the user (if Fastboot don't work on the PC), or by recognizing the phone (but with a still running system) via ADB, then auto-switching to Fastboot. And you should also be able to attach the phone when it's already in Fastboot mode. The latter methods don't work on both my systems under Win10. When my desktop pc had been upgraded to 8.1, i performed all servicing of the L9 with my netbook, which was still on Seven.
My last unbrick was months ago, and i don' t know what happens at 50%. It's something important, and knowing it may help to understand the nature of the problem(loss of contact between phone and pc before the actual process starts, errors during flashing...).
It could be like this:
-phone seems to get recognized by driver&tool, that is good
-image gets downloaded(only with the official tool)
-image gets temporarily extracted on the pc(both online and offline). I fear that by completing the extraction the 50% mark is reached, and that no actual writes to the phone can be performed.
And LG's stock recovery, which calls itself "service mode" or "s/w mode" can be mistaken for D/L mode. I'm talking about the D/L mode, which is also present with a custom recovery, but theoretically D/L mode, S/W mode and Fastboot could be used for unbricking
lecorbusier said:
We'd need someone with a p778g. The problem may be be caused by the special branding of the phone, or an encrypted bootloader. Or the internal flash got completely cleared, partitions and baseband rom, which means a full brick. Otherwise flashing stock in D/L mode should work, even if anything else fails. But this goes mainly for LGs official tool working online. With the LG Flash Tool 2014 i had also problems.
I think both tools have to ways to perform the unbricking. Either with the phone put in D/L mode by the user (if Fastboot don't work on the PC), or by recognizing the phone (but with a still running system) via ADB, then auto-switching to Fastboot. And you should also be able to attach the phone when it's already in Fastboot mode. The latter methods don't work on both my systems under Win10. When my desktop pc had been upgraded to 8.1, i performed all servicing of the L9 with my netbook, which was still on Seven.
My last unbrick was months ago, and i don' t know what happens at 50%. It's something important, and knowing it may help to understand the nature of the problem(loss of contact between phone and pc before the actual process starts, errors during flashing...).
It could be like this:
-phone seems to get recognized by driver&tool, that is good
-image gets downloaded(only with the official tool)
-image gets temporarily extracted on the pc(both online and offline). I fear that by completing the extraction the 50% mark is reached, and that no actual writes to the phone can be performed.
And LG's stock recovery, which calls itself "service mode" or "s/w mode" can be mistaken for D/L mode. I'm talking about the D/L mode, which is also present with a custom recovery, but theoretically D/L mode, S/W mode and Fastboot could be used for unbricking
Click to expand...
Click to collapse
If i was you:
1) Enter in bootload mode using LELUS Method
2) Flash a TWRP 3.0.2 recovery
3) In TWRP recovery format all partitions
4) Install a custom rom
5) Enjoy
Generic Disclaimer: By doing any of the process listed below you accept complete responsibility over any of your actions, I will not be responsible if you end up causing hard brick, data loss or any kind of loss to your personal property.
Hii XDA fellows,
So I have seen many people asking for noob friendly guide to restore original oxygen os firmware or basically unbrick device. There are several thread on this already but trust me I have tried them all and in my case I had to use my own brain. So I have compiled a noob friendly guide which I,myself have used to unbrick my device.
small warning this will wipe all of your data.
Firstly I wants to thank Some_Random_Username for bringing up MSM Unbrick tool for OnePlus Nord. His guide to unrick nord is also fairly good enough but in my case I was stuck in bootloop after installing a rom. My phone was not even booting to Qualcomm EDL Mode so that I can use MSM Tool.
Lets start with pre-requisites:
You must have unlocked bootloader.
Original Oneplus Type - C cable.
Windows PC.
ADB debugging turned on your phone.
Firstly Switch off your device, which I think most of you have already have as the device is bricked but in case your phone is stuck in bootloop or recovery or bootloader menu itself then try holding down voume up button and power button together hold them down till you get heptic feedback and screen goes off. Let it be cool down for about a minute.
Now Setup your PC:
Download MSM tool to from this guide : Click here
Setup adb environment in your PC if you havent already setup follow this guide
Download Qualcomm EDL drivers from here: Click here
Now download Unofficial TWRP recovery by Mauronofrio from here
On your PC right click on start menu icon and start Windows Powershell(Admin) and type this command bcdedit /set testsigning on This will turn off driver signature verifications on windows you will be required to restart your pc now after you restart your pc will boot into test mode and you'll see a watermark stating the same in bottom left of your desktop. Worry not we will undo this after we have finished restoring.
install Qualcomm EDL drivers by running the setup listed above.
Unzip MSMTool there you will see a file named MsmDownloadTool V4.0.exe run it, it'll take some time but after you see a pop up asking for user type user name and password, Select other as user type and leave other stuffs blank as it is and click next.
In the next window, In the target button select O2 while using global tool or India while using indian tool or EU when using european tool.
Now you have to boot into Qualcomm Emergency Download Mode
You can do this in several diffrent ways but one I am listing here is recommended :
Boot into fastboot/bootloader mode by pressing and holding Volume up, Volume down and power button together when you see a Menu pop up on your screen you can let go all the fingers at once.
Now connect your phone to your PC and go to that folder where TWRP recovery is located. Hold Shift button and Right click inside that folder you'll see an option "Open powershell window here click on it. In the powershell window type
fastboot devices and press enter your device will be listed as fastboot devices in powershell window. Now type
fastboot boot twrp1.img press enter
your device will boot up in TWRP recovery in twrp recovery go to reboot section and select Edl, This will boot your phone Edl mode your screen will go off as soon as it happens in the MSM tool window you'll see a device listed as com3/com5/com7.
Click on start button the restoration process will begin. Wait for about 400 secs and your device will automatically boot up.
Voila you've successfully unbricked your phone.
If you want to exit from Driver test mode on your pc simply start a powershell window with admin rights and type
bcdedit /set testsigning off
and restart your PC.
So first off all i want to say thanks for this guide.
So , i have a problem with my phone getting reconized by my pcs, so, my Phone just works fine but i want to restore it to stock, i'm using aospex 8.3.
Since a few days my phone dosnt get reconzied by my pc, i've tried windows and linux, both installations cant find my phone, i tried diffrent pc's,usb cables, driver, new installations of windows and linux mint, other phones dont have this problem, tried resetting , everything, do you have a idea what i could try or could it be just my phone port thats damaged and cant transfer data anymore, if anyone has an idea i would really be happy about an answer , thanks!
peppanzer said:
So first off all i want to say thanks for this guide.
So , i have a problem with my phone getting reconized by my pcs, so, my Phone just works fine but i want to restore it to stock, i'm using aospex 8.3.
Since a few days my phone dosnt get reconzied by my pc, i've tried windows and linux, both installations cant find my phone, i tried diffrent pc's,usb cables, driver, new installations of windows and linux mint, other phones dont have this problem, tried resetting , everything, do you have a idea what i could try or could it be just my phone port thats damaged and cant transfer data anymore, if anyone has an idea i would really be happy about an answer , thank
Click to expand...
Click to collapse
Seems like it's a software issue probably a bug in your rom rich out to the developer he might help you, as you have tried both with Linux and windows i don't think it's a driver issue, it could be an issue with the hardware also but chances are pretty low for this to happen. Try flashing other roms if you have backup of your phone, use orange fox recovery it has an option of taking nandroid backup.
IamAlok said:
Seems like it's a software issue probably a bug in your rom rich out to the developer he might help you, as you have tried both with Linux and windows i don't think it's a driver issue, it could be an issue with the hardware also but chances are pretty low for this to happen. Try flashing other roms if you have backup of your phone, use orange fox recovery it has an option of taking nandroid backup.
Click to expand...
Click to collapse
the thing is that i cant flash other roms, my phone dosn't gets recognized in fastboot, recovery and edl, so with the aex recovery installed i have no chance to change the rom without a pc, reached out to the dev but seems i'm the only person with the proplem, but thanks for helping.